Reconstruction of low temperature (<100 °C) burial in sedimentary basins: A comparison of geothermometer in the intracontinental Paris Basin

The thermal evolution of sediments in the shallowest part of sedimentary basins is challenging to investigate as most of the geothermometers are at their application limits. This is typically the case of the Callovian–Oxfordian claystones at the eastern border of the Paris Basin. A recent 2000 m deep well penetrated the entire Jurassic and Triassic sedimentary series and permitted coring of sediments never reached by previous drilling in this part of the basin. Thanks to the use of several independent geothermometers (apatite fission track thermochronology, fluid inclusion microthermometry, clay mineralogy and sedimentary organic matter evolution) the burial history of the Mesozoic series has been reconstructed, modeled and calibrated using kinetic algorithms relevant to the various paleothermometers used. In addition to these conventional methods, an innovative approach was developed using the temperature-dependence of the magnetic mineral assemblage within clay-rich sediments (“MagEval”). Thermal modeling indicates that the Callovian–Oxfordian and the Lower Triassic experienced maximum burial temperatures of 50 ± 5 °C and 90 ± 10 °C respectively, i.e., about 25 °C higher than present-day. This temperature offset implies the erosion of several hundred meters of sediments which, depending on the thermal flux and conductivity considered, most likely constituted Upper Cretaceous chalk deposits. Falling sea level resulted in the exposure and subsequent dismantling of the chalk cover at the beginning of Cenozoic times. The eastern border of the basin was then subjected to slow erosion and discrete tectonic deformation.     

Post-glacial persistence of turbiditic activity within the Rhône deep-sea turbidite system (Gulf of Lions,Western Mediterranean): Linking the outer shelf and the basin sedimentary records

Emplacement of post-glacial turbidites is commonly controlled by rapid changes in sea level or by seismicity. On the continental rise of the Gulf of Lions (Western Mediterranean), an aseismic area, we identified turbiditic beds deposited during the rising stage and highstand of sea level. Swath bathymetry, sediment cores, in situ Cone Penetrating Tests (CPTU), heavy mineral associations and radiocarbon dating determined the source, composition, distribution and age of the turbiditic beds. Turbidites are composed of homogeneous to positively graded silts to medium sand with quartz (up to 90%), shell debris and shelfal benthic faunas. Their distribution on the sea floor is very patchy and controlled by abundant inherited erosional bedforms. Their source is found in relict regressive sands at the outershelf. Their deposition occurred just after the onset of the post-glacial sea level rise and the concomitant sediment starvation of the Rhône deep sea turbiditic system until recently. Whilst canyons are fed with sand by strong seasonal hydro-sedimentary dynamics on the outershelf, the emplacement of post-glacial turbidites is not controlled by sea level changes but probably by the periodic flushing of the canyons. Our study revealed that this low energy aseismic margin undergoes significant transport of sand, down to the base of slope, during the sea-level rise and the Holocene highstand.     

The Bellingshausen—Amundsen basins (southeastern Pacific): Major sea-floor units and problems

The physiography of the Amundsen and Bellingshausen Basins and adjacent continental margin of Antarctica is described based on all existing geologic/geophysical data. The sea-floor morphology is the result of a complex spreading history in this region which commenced in the pre-Cretaceous. Abyssal constructional forms including the location of the abyssal plains reflect this spreading history. Another decisive event was the initiation of the circum-Antarctic current and its resultant redistribution of the sedimentary blanket. The third major controlling factor was the commencement of polar conditions on Antarctica which effected a change in continental erosional patterns.     

Performance and limitations of the Hilbert–Huang transformation (HHT) with an application to irregular water waves

This paper relates to the newly developed Hilbert–Huang transformation (HHT). An overview of this time-frequency analysis technique and its applications are given. Key elements of the numerical procedure and principles of the Hilbert transformation (HT) are established. A simple parameter study with trigonometric functions to get an idea about the numerical performance of the empirical mode decomposition (EMD) is performed. The main results of estimating relative standardized errors made between analytically exact defined sine waves and disintegrated intrinsic functions as well as their specific influence on each other are determined. Practical applications are carried out next to evaluate computed nonlinear irregular water waves based on Stokes perturbation expansion approach and measurements on fully nonlinear irregular water waves recorded in a laboratory wave flume. Correspondence between simulated and recorded wave trains is given for narrow-banded fundamental components. Deviations are unveiled when carrier and riding waves get broad banded. Time-dependent spectral representation shows signs of an interesting phenomenon as instantaneous frequencies and amplitudes exhibit strong correlations with water surface elevations of both numerical and measured data series.     

Methane anomalies,its flux on the sea–atmosphere interface and their relations to the geological structure of the South-Tatar sedimentary basin (Tatar Strait,the Sea of Japan)

Marine Geophysical Research - The paper presents the effects of gasgeochemical survey in the upper layer and water column, as well as in bottom sediments in the Tatar Strait (the North of the Sea...     

Marine Geodesy (1975–1979)— to the International Association of Geodesy,Section 1

Abstract

Geographic Information Systems (GIS) have been developed during the last decade. Their land‐based applications range from land information management, urban planning, and environmental research to engineering design and management in the utility and oil industries, geological subsurface analysis, and others. However, applications of GIS in the marine environment are still in the initial stages. This may be due to, among other things, the large marine data sets, the demands of 3D data processing, and the difficulty of ocean data acquisition.

This article presents the result of the development of an integrated Marine Geographic Information System (MGIS) for the exploration and development of the Exclusive Economic Zone (EEZ) in the U.S. Pacific Islands region by the Pacific Mapping Center, University of Hawaii. Features such as spatial marine data processing, integration of GIS and mapping systems, 3D data structures, and simulation and animation of marine operations are developed and applied in this system. Since MGIS applications in EEZ are related to many disciplines in marine sciences and engineering, an operational MGIS should be an integrated system in which both basic GIS and marine application systems are combined into a single geo‐referenced system, In addition to other applications, this MGIS has been used: (1) to select a potential deep‐water research site off the island of Hawaii for the State of Hawaii Department of Business, Economic, and Development (DBED); (2) to generate a three‐dimensional database and use it for the navigation and simulation of underwater operations of an underwater research vehicle; and (3) to produce two 2° × 2° mosaic sheets of sonar images, which meet the USGS standard for a sonar image atlas.     

Methodology for estimation of river discharge and application of the Zhujiang River Estuary(ZRE)

The ZRE is a very complicated estuary with multi-river inlets. The total sum of river discharge in the upstream(away from the tidal influence region) of the Zhujiang River can be easily measured. However, when the total river discharges into the estuary from eight inlets, it is a very difficult task to obtain a continuous river discharge flux data from each branch of the Zhujiang River. However, the different ratios of river discharges between the river branches can significantly affect the estuarine circulation feature and baroclinic process. Moreover, the accuracy of numerical forecast for the estuarine circulation is very much dependent on the accuracy of the time history of the river discharge flux for each branch. Therefore, it is important to estimate river discharge from each branch in order to improve the accuracy of the model forecast for the circulation of the ZRE. The development of a new estimation method of the river discharges is focused on based on the system identification theory, numerical modeling and the time history data from the CODAR observed sea surface current. The new approach has been appfied to estimating the time history (hourly) of river discharge from each branch in the upstream of the ZRE.     

Morphology,sedimentary infill and depositional environments of the Early Quaternary North Sea Basin (56°–62°N)

The North Sea Basin has been subsiding during the Quaternary and contains hundreds of metres of fill. Seismic surveys (170 000 km²) provide new evidence on Early Quaternary sedimentation, from about 2.75 Ma to around the Brunhes-Matuyama boundary (0.78 Ma). We present an informal seismic stratigraphy for the Early Quaternary of the North Sea, and calculate sediment volumes for major units. Early Quaternary sediment thickness is > 1000 m in the northern basin and >700 m in the central basin (total about 40 000 km³). Northern North Sea basin-fill comprises several clinoform units, prograding westward over 60 000 km². Architecture of the central basin also comprises clinoforms, building from the southeast. To the west, an acoustically layered and mounded unit (Unit Z) was deposited. Remaining accommodation space was filled with fine-grained sediments of two Central Basin units. Above these units, an Upper Regional Unconformity-equivalent (URU) records a conformable surface with flat-lying units that indicate stronger direct glacial influence than on the sediments below. On the North Sea Plateau north of 59°N, the Upper Regional Unconformity (URU) is defined by a shift from westward to eastward dipping seismic reflectors, recording a major change in sedimentation, with the Shetland Platform becoming a significant source. A model of Early Quaternary sediment delivery to the North Sea shows sources from the Scandinavian ice sheet and major European rivers. Clinoforms prograding west in the northern North Sea Basin, representing glacigenic debris flows, indicate an ice sheet on the western Scandinavian margin. In the central basin, sediments are generally fine-grained, suggesting a distal fluvial or glacifluvial origin from European rivers. Ploughmarks also demonstrate that icebergs, derived from an ice sheet to the north, drifted into the central North Sea Basin. By contrast, sediments and glacial landforms above the URU provide evidence for the later presence of a grounded ice sheet.     

Identifying the importance of the “skipper effect” within sources of measured inefficiency in fisheries through data envelopment analysis (DEA)

Technical efficiency, uncertainties in data quality and natural fluctuations in fishing stocks constitute potential sources of fishing vessel inefficiency. Moreover, debate is on-going as to whether the skill of the fishermen (“skipper effect”) is an underlying actor in fishing efficiency. Therefore, this article monitors, calculates and quantifies the inefficiency caused by the “skipper effect”, if any, through the use of data envelopment analysis (DEA), with the aim of determining whether best practice target operational values in DEA, and their associated environmental impact reductions through LCA+DEA methodology, are achievable beyond the theoretical baseline they involve. A window analysis model is applied to the US menhaden fishery, a purse seining fleet with high homogeneity, since it is owned by the same company, with similar vessel and management characteristics. Results revealed relevant inefficiency levels in the four ports assessed, suggesting the existence of a “skipper effect” in all of them. Strong variances between vessels were identified, not only on an annual mean basis, but also per week of study. These variances could be attributed to random variation through time, if it were not for the fact that best performing vessels managed to repeatedly perform at high efficiency rates throughout the period. Moreover, standard deviations of low efficiency vessels were higher in all ports. Consequently, best performing targets calculated in LCA+DEA may be difficult to achieve in fleets where skipper skill strongly influences the sources of inefficiency. In these cases, the results suggest that resource minimization should be linked to specific measures to improve the individual skills of low performing vessels to attain best practice targets.     

Evolution of lacustrine systems along the Miocene Mur-Mürz fault system (Eastern Alps,Austria) and implications on source rocks in pull-apart basins

Tectonically controlled lakes developed during Miocene lateral extrusion of the Eastern Alps. Mineralogy, and the inorganic and organic geochemistry of rocks from three boreholes were investigated to reconstruct the evolution of Lake Ingering and Lake Groisenbach and to study the distribution of source rocks in pull-apart basins. Gas-prone coal and oil-prone sapropelic shale accumulated during the initial, shallow stages of Lake Ingering. Thereafter, the lake deepened rapidly. 125-m-thick prodelta shale containing a type II kerogen was deposited in the brackish, several hundred meter deep, hydrologically closed lake. Afterwards, decreasing subsidence allowed the filling of the lake by prograding deltas. During the advance of the deltaic systems, the lake became shallower, hydrologically open, and the brackish influence terminated. Source rock quality decreased significantly during the filling stage of the lake, a consequence of dilution of autochthonous organic matter and of enhanced input of land plants. Despite its considerable dimensions, formation and filling of Lake Ingering lasted only two million years. Lake Groisenbach was considerably smaller and more susceptible to high-frequency changes in lake chemistry. Although the water body was temporarily oligosaline, brackish conditions did not occur. High sulphur contents were due to anoxic events and the inflow of Ca-rich waters. Abundant dissolved silica favoured diatoms blooms.     

Fluid inclusion and microfabric studies on Zechstein carbonates (Ca2) and related fracture mineralizations – New insights on gas migration in the Lower Saxony Basin (Germany)

New petrographic and fluid inclusion data from core samples of Upper Permian dolomitic limestone (Hauptdolomit, Zechstein group, Stassfurt carbonate sequence) from a gas field located at the northern border of the Lower Saxony Basin (LSB) essentially improve the understanding of the basin development. The gas production at the locality is characterized by very high CO₂ concentrations of 75–100% (with CH₄ and N₂).Samples consist of fine grained, mostly laminated and sometimes brecciated dolomitic limestone (mudstone/wackestone) from the transition zone between the shallow water zone (platform) and the upper slope. The study focuses on migration fluids, entrapped as fluid inclusions in diagenetic anhydrite, calcite, and fluorite, and in syn-diagenetic microfractures, as well as on the geochemistry of fluorite fracture mineralizations, obtained by LA-ICP-MS analysis. Fluid inclusion studies show that the diagenetic fluid was rich in H₂ONaClCaCl₂. Recrystallized anhydrite contains aqueous inclusions with homogenization temperatures (T_h) of ca. 123 °C, but somewhat higher T_h of ca. 142 °C was found for calcite cement followed by early Fluorite A with T_h of 147 °C. A later Fluorite B preserves gas inclusions and brines with maximum T_h of 156 °C. Fluorite B crystallized in fractures during the mobilization of CO₂-bearing brines. Crossing isochores for co-genetic aqueous-carbonic and carbonic inclusions indicate fluid trapping conditions of 180–200 °C and 900–1000 bars. δ¹³C-isotopic ratios of gas trapped in fluid inclusions suggest an organic origin for CH₄, while the CO₂ is likely of inorganic origin.Basin modelling (1D) shows that the fault block structure of the respective reservoir has experienced an uplift of >1000 m since Late Cretaceous times.The fluid inclusion study allows us to, 1) model the evolution of the LSB and fluid evolution by distinguishing different fluid systems, 2) determine the appearance of CO₂ in the geological record and, 3) more accurately estimate burial and uplift events in individual parts of the LSB.     

Reply to Narkiewicz (2017) comment on “Thermal evolution of Paleozoic successions of the Holy Cross Mountains (Poland)”

In this paper we reply to the criticisms advanced by Narkiewicz (2017) on the paper by Schito et al. (2017). We clarify the issues related to the stratigraphic and thermal maturity constraints used for reconstructing burial and thermal models of the two blocks of the Holy Cross Mountains.We also show how geological evidences brought by Narkiewicz (2017) as a proof of elevated Variscan heat flow are not conclusive or at least suggest the occurence of a localized thermal anomaly only along the area of the Holy Cross Fault.In the end, we performed new burial and thermal models in the Kielce region demonstrating that stratigraphic thickness variations between Schito et al. (2017) and Narkiewicz et al. (2010) produce only negligible differences in levels of thermal maturity of Paleozoic rocks. In addition, we outline that levels of thermal maturity for Silurian rocks can be matched only by using constant heat flow values through the Paleozoic and point to a decisive role for the absence of regional high Variscan heat flow in the area.     

Response of Nereis diversicolor population (Polychaeta,Nereididae) to the pollution impact – Authie and Seine estuaries (France)

A survey within the French National Programme of Ecotoxicology was carried out in 2002, 2003 and 2004 to study the response of Nereis diversicolor populations (Polychaeta, Nereididae) to the impact of pollution in the Authie estuary (non-contaminated site) and in the Seine estuary (contaminated site). In the period studied, the density varied from 672 ind. m⁻² to 3584 ind. m⁻² in the Authie estuary and from 80 ind. m⁻² to 920 ind. m⁻² in the Seine estuary. Biomass varied from 3.94 g m⁻² (dry weight) in February 2004 to 38.0 g m⁻² in August 2003 in the Authie estuary and from 3.4 g m⁻² in February 2002 to 0.6 g m⁻² in February 2004 in the Seine estuary. Density and biomass of the populations of N. diversicolor were consistently lower in the Seine estuary than in the Authie estuary. Size frequency histograms permit the analysis of the cohorts as well as the elaboration of the growth curves. For the individuals from the Authie estuary, the relation between dry weight (DW) and length L3 (prostomium, peristomium and chaetiger 1) was DW = 4.2205 L3^2.9832. For those from the Seine estuary, the relation between dry weight and L3 was DW = 0.4697e^1.7209L3. The individuals of N. diversicolor should belong to eight cohorts in Authie estuary (two cohorts each year) instead of six cohorts for those from the Seine estuary. These differences can be attributed to the effect of pollution on the population of N. diversicolor.     

The contribution of marine geology to the knowledge of marine coastal environment off the Campania region (southern Italy): the geological map n. 502 “Agropoli” (southern Campania)

The marine geological map n. 502 “Agropoli”, located offshore the Cilento Promontory, southern Italy, is here described and the regional geology interpreted, particularly referring to water depths between the 30 and 200 m isobaths. The geologic map has been constructed in the frame of a research program financed by the National Geological Survey of Italy (CARG Project), finalized to the construction of up-to-date cartography of the Campania region. Geological and geophysical data on the continental shelf and slope offshore of the Southern Campania region have been collected in the study area, bounded northwards by the Salerno Gulf and southwards by the Policastro Gulf. A high resolution multibeam bathymetry allowed for the construction of a marine digital elevation map; sidescan sonar profiles also have been collected and interpreted. The latter, merged to the bathymetry, have represented the base for the marine geologic cartography. The integrated geologic interpretation of seismic, bathymetric and sidescan sonar data has been calibrated by sea-bottom samples. The morpho-structures and the seismic sequences overlying the outcrops of acoustic basement reported in the cartographic representation have been studied in detail using single-channel seismics. The interpretation of seismic profiles has been a support for the reconstruction of the stratigraphic and structural setting of the Quaternary continental shelf successions and the outcrops of rocky acoustic basement in correspondence to the Licosa Cape morpho-structural high. These areas result from the seaward prolongation of the stratigraphic and structural units, widely cropping out in the surrounding emerged sector of the Cilento Promontory. The cartographic approach is based on the recognition of laterally coeval depositional systems, interpreted in the frame of the system tracts of the Late Quaternary depositional sequence. We present evidence of now subaqueous terraces inferred to be palaeoshorelines representing past sea-level positions and tentatively correlated these to oxygen isotopic stratigraphy.     

Geological structure of the Mediterranean Sea floor (based on geological—Geophysical data)

According to geophysical data, the Mediterranean Sea depressions are noted for a peculiar type of the earth's crust. The sedimentary rock sequence is of great thickness (8–15 km) and is of platform-type dislocation. Several structural stages are distinguished in the sedimentary complex. The youngest of them are the Messinian (evaporite) and Pliocene—Quaternary stages. The consolidated part of the earth's crust shows small thickness and is divided into large blocks. Vertical dislocations of the large crustal blocks which were conditioned by condensation—rarefaction and the upper mantle substance migration were at the base of Mediterranean sea floor transformation.     

Observation of temperature and velocity from a surface buoy moored in the Shikoku Basin (OMLET-88) —An oceanic response to a Typhoon

A surface buoy was moored from 20 April to 2 November 1988 at 28°48 N and 135°01 E where the water depth was 4900 m to measure temperature and velocity in the upper 150 m. The Typhoon 8824 passed at 0300 (JST) on 8 October about 50 km north to the mooring station with a maximum wind speed of 43.5 m s^–1. The buoy was shifted about 30 km to southwest, and the instruments were damaged. The records of temperature at 0.5 m and velocity at 50 m were obtained. The inertial oscillation caused by the typhoon is described using the current record. The oscillation endured for about 20 days. Deep mixing and vertical, heart transport by the typhoon are discussed based on the data from the Ocean Data Buoy of the Japan Meteorological Agency moored at 29°N and 135°E.