Improving the seeing with wide-field adaptive optics in the near-infrared

In this paper, we present simulation results of a ground-layer correction adaptive optics system (GLAO), based on four laser guide stars and a single deformable mirror. The goal is to achieve a seeing improvement over an 8-arcmin field of view, in the near-infrared (from 1.06 to 2.2 μm). We show results on the scaling of this system (number of subapertures, frame rates), and the required number of tip-tilt stars. We investigate the use for GLAO of both sodium and Rayleigh guide stars. We also show that if the lasers can be repositioned, the performance of the adaptive optics can be tailored to the astronomical observations.     

Fast computation of 2D transfer functions from adaptive optics data

The use of atmospheric transfer functions is common in image reconstruction techniques such as speckle interferometry to calibrate the Fourier amplitudes of the reconstructed images. Thus, an accurate model is needed to ensure proper photometry in the reconstruction. The situation complicates when adaptive optics (AO) are used during data acquisition. I propose a novel technique to derive two‐dimensional transfer functions from data collected using AO simultaneously with the observations. The technique is capable to compute the relevant transfer functions within a short time for the prevailing atmospheric conditions and AO performance during data acquisition (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Pseudo-infinite guide stars for multi-conjugated adaptive optics on extremely large telescopes

We introduce a novel concept to sense the wavefront for adaptive optics purposes in astronomy using a conventional laser beacon. The concept we describe involves treating the light scattered in the mesospheric sodium layer as if it comes from multiple rings located at infinity. Such a concept resembles an inverse Bessel beam and is particularly suitable for multi-conjugated adaptive optics on extremely large telescopes. In fact, as the sensing process uses light apparently coming from infinity, some problems linked to the finite distance and vertical extent of the guide source are solved. Since such a technique is able to sense a wavefront solely in the radial direction, we propose furthermore a novel wavefront sensor by combining the inverse Bessel beam approach with the recently introduced z -invariant technique for a pseudo-infinite guide star sensor.     

The GREGOR adaptive optics system

The new 1.5‐m German solar telescope GREGOR at the Observatorio del Teide, Tenerife, is equipped with an integrated adaptive optics system. Although partly still in the commissioning phase, the system is already being used used for most science observations. It is designed to provide diffraction‐limited observations in the visible‐light regime for seeing better than 1.2″. We describe the AO system including the optical design, software, wavefront reconstruction, and performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Improvements on the optical differentiation wavefront sensor

We describe a novel concept for high-resolution wavefront sensing based on the optical differentiation wavefront sensor (OD). It keeps the advantages of high resolution, adjustable dynamic range, ability to work with polychromatic sources and, in addition, it achieves good performance in wavefront reconstruction when the field is perturbed by scintillation. Moreover, this new concept can be used as multi-object wavefront sensor in multiconjugate adaptive optics systems. It is able to provide high resolution and high sampling operation, which is of great interest for the projected extreme adaptive optics systems for large telescopes.     

A z-invariant Rayleigh beacon wavefront sensor

An innovative concept of wavefront sensing for Rayleigh beacons is introduced along with an example of a possible wavefront sensor. This new approach does not require the gating technique to limit the useful range of the laser source and therefore looks simpler to implement than previous Rayleigh concepts, and may additionally allow more efficient use of the photons emitted by the Rayleigh beacon. Our technique is based upon an optical element in the focal plane area whose section does not change for the conjugation of different ranges from the telescope aperture, hence the name z -invariant. The wavefront sensor shown here is an example of this new class. It is a compact pupil-plane wavefront sensor and as such allows for a layer-oriented configuration. It is shown that its sensitivity, while higher than usual gating approaches, is far from the possible limits leading us to speculate that other z -invariant wavefront sensors can reach much larger efficiencies.     

New challenges for adaptive optics: extremely large telescopes

The performance of an adaptive optics (AO) system on a 100-m diameter ground-based telescope working in the visible range of the spectrum is computed using an analytical approach. The target Strehl ratio of 60 per cent is achieved at 0.5 μm with a limiting magnitude of the AO guide source near R   magnitude~10, at the cost of an extremely low sky coverage. To alleviate this problem, the concept of tomographic wavefront sensing in a wider field of view using either natural guide stars (NGS) or laser guide stars (LGS) is investigated. These methods use three or four reference sources and up to three deformable mirrors, which increase up to 8-fold the corrected field size (up to 60 arcsec at 0.5 μm). Operation with multiple NGS is limited to the infrared (in the J band this approach yields a sky coverage of 50 per cent with a Strehl ratio of 0.2). The option of open-loop wavefront correction in the visible using several bright NGS is discussed. The LGS approach involves the use of a faint ( R ~22) NGS for low-order correction, which results in a sky coverage of 40 per cent at the Galactic poles in the visible.     

Phasing segmented mirrors using defocused images at visible wavelengths

Plans for future optical telescopes of diameter more than 10 m are based on segmented mirrors, made up of hundreds or even thousands of segments. A challenge for these telescopes is the alignment in piston (cophasing) where phase differences between individual segments have to be reduced to a small fraction of the observing wavelength in order to avoid degradation of image quality.
Based on the phase discontinuity sensing method used at the Keck telescopes to measure small piston errors using infrared wavelengths, we develop a new method that allows fast high-precision measurements of large piston errors even at visible wavelengths.     

Improvement in the performance of solar adaptive optics

Adaptive optics （AO）, which provides diffraction limited imaging over a field-of-view （FOV）, is a powerful technique for solar observation. In the tomographic approach, each wavefront sensor （WFS） is looking at a single reference that acts as a guide star. This allows a 3D reconstruction of the distorted wavefront to be made. The correction is applied by one or more deformable mirrors （DMs）. This technique benefits from information about atmospheric turbulence at different layers, which can be used to reconstruct the wavefront extremely well. With the assistance of the MAOS software package, we consider the tomography errors and WFS aliasing errors, and focus on how the performance of a solar telescope （pointing toward zenith） is related to atmospheric anisoplanatism. We theoretically quantify the performance of the to- mographic solar AO system. The results indicate that the tomographic AO system can improve the average Strehl ratio of a solar telescope in a 10＂ - 80＂ diameter FOV by only employing one DM conjugated to the telescope pupil. Furthermore, we discuss the effects of DM conjugate altitude on the correction achievable by the AO system by selecting two atmospheric models that differ mainly in terms of atmospheric prop- erties at ground level, and present the optimum DM conjugate altitudes for different observation sites.     

Scientific instrumentation for the 1.6 m New Solar Telescope in Big Bear

The NST (New Solar Telescope), a 1.6 m clear aperture, off‐axis telescope, is in its commissioning phase at Big Bear Solar Observatory (BBSO). It will be the most capable, largest aperture solar telescope in the US until the 4 m ATST (Advanced Technology Solar Telescope) comes on‐line late in the next decade. The NST will be outfitted with state‐of‐the‐art scientific instruments at the Nasmyth focus on the telescope floor and in the Coudé Lab beneath the telescope. At the Nasmyth focus, several filtergraphs already in routine operation have offered high spatial resolution photometry in TiO 706 nm, Hα 656 nm, G‐band 430 nm and the near infrared (NIR), with the aid of a correlation tracker and image reconstruction system. Also, a Cryogenic Infrared Spectrograph (CYRA) is being developed to supply high signal‐to‐noise‐ratio spectrometry and polarimetry spanning 1.0 to 5.0 μm. The Coudé Lab instrumentation will include Adaptive Optics (AO), InfraRed Imaging Magnetograph (IRIM), Visible Imaging Magnetograph (VIM), and Fast Imaging Solar Spectrograph (FISS). A 308 sub‐aperture (349‐actuator deformable mirror) AO system will enable nearly diffraction limited observations over the NST's principal operating wavelengths from 0.4 μm through 1.7 μm. IRIM and VIM are Fabry‐Pérot based narrow‐band tunable filters, which provide high resolution two‐dimensional spectroscopic and polarimetric imaging in the NIR and visible respectively. FISS is a collaboration between BBSO and Seoul National University focussing on chromosphere dynamics. This paper reports the up‐to‐date progress on these instruments including an overview of each instrument and details of the current state of design, integration, calibration and setup/testing on the NST (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Adaptive optics parameters connection to wind speed at the Teide Observatory

Current projects for large telescopes demand a proper knowledge of atmospheric turbulence to design efficient adaptive optics systems in order to reach large Strehl ratios. However, the proper characterization of the turbulence above a particular site requires long-term monitoring. Because of the lack of long-term information on turbulence, high-altitude winds (in particular winds at the 200 mbar pressure level) were proposed as a parameter for estimating the total turbulence at a particular site, with the advantage of records of winds going back several decades. We present the first complete study of atmospheric adaptive optics parameters above the Teide Observatory (Canary Islands, Spain) in relation to wind speed. On-site measurements of   C ² _N ( h )  profiles (more than 20 200 turbulence profiles) from G-SCIDAR (Generalized Scintillation Detection and Ranging) observations and wind vertical profiles from balloons have been used to calculate the seeing, the isoplanatic angle and the coherence time. The connection of these parameters to wind speeds at ground and at 200 mbar pressure level are shown and discussed. Our results confirm the well-known high quality of the Canary Islands astronomical observatories.     

The seeing at the William Herschel Telescope

We present results from a study of the seeing quality at the 4.2-m William Herschel telescope at La Palma. The median intrinsic seeing at the site is found to be excellent, and is comparable to that at the Paranal and Mauna Kea observatories. Contributions to the seeing from turbulence within the telescope dome are insignificant. Furthermore, the optical quality and tracking stability of the telescope are good, so that long-exposure image widths close to the limit imposed by the site seeing can be expected.     

NLST: India's National Large Solar Telescope

This article introduces the new Indian 2 m telescope which has been designed by MT Mechatronics in a detailed conceptual design study for the Indian Institute of Astrophysics, Bangalore. We describe the background of the project and the science goals which shall be addressed with this telescope. NLST is a solar telescope with high optical throughput and will be equipped with an integrated Adaptive Optics system. It is optimized for a site with the kind of seeing and wind conditions as they are expected at a lake site in the Himalayan mountains. The telescope can also be used for certain night time applications. We also give the scientific rationale for this class of telescope (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)