The distribution and speciation of trace metals in surface sediments from the Pearl River Estuary and the Daya Bay, Southern China

Surface sediments collected from the Pearl River Estuary (PRE) and the Daya Bay (DYB) were analyzed for total metal concentrations and chemical phase partitioning. The total concentrations of Cr, Cu, Ni, Pb, and Zn in the PRE were obviously higher than those in DYB. The maximum concentrations of trace metals in DYB occurred in the four sub-basins, especially in Dapeng Cove, while the concentrations of these metals in the western side of the PRE were higher than those in the east side. Such distribution pattern was primarily due to the different hydraulic conditions and inputs of anthropogenic trace metals. The chemical partitioning of metals analyzed by the BCR sequential extraction method showed that Cr, Ni, and Zn of both areas were present dominantly in the residual fraction, while Pb was found mostly in the non-residual fractions. The partitioning of Cu showed a significant difference between the two areas.     

Concentration and fractionation of trace metals in surface sediments of intertidal Bohai Bay, China

Surface sediments from intertidal Bohai Bay were sampled for the geochemical and environmental assessment of six trace metals (Cd, Cr, Cu, Ni, Pb and Zn). Results indicate that sediment grain size plays an important role in controlling the distribution and fractionation of them. Metal concentrations in clayey silt sediments are all clearly higher than in sand and silty sand ones. Cd and Pb in clayey silt sediments are more mobile than in sand and silty sand ones. Two sediment quality guidelines and two geochemical normalization methods (index of geoaccumulation and enrichment factor) were used to judge the potential risk and accumulation of metals. According to the mean probable effects level quotient, the combination of studied metals may have a 21% probability of being toxic. The sediments with high fraction of clay and silt have been contaminated by trace metals to various degrees, among which Cr contributes the most to contamination.     

The distribution of heavy metals including Pb,Cd and Cr in Kendari Bay surficial sediments

The surficial coastal sediments in Kendari Bay are sampled in the field to determine the concentration and pollution level of three heavy metals (Pb, Cd and Cr). Twenty-five sampling points ranging from the inner (Wanggu River) to the outer area of the bay have been chosen. The physicochemical properties, such as temperature, pH, salinity and TDS of the overlying water, as well as the sediment type and TOC of the surficial sediments, are also measured. The total concentrations of the Pb, Cd and Cr in the sediment samples are quantified using inductively-coupled plasma mass spectrometry (ICP-MS). The concentrations of the heavy metals (Pb, Cd and Cr) ranged from 0.84 to 17.02 μg/g, 0.02 to 0.17 μg/g and 1.92 to 40.11 μg/g (dry weight), respectively, following the Cr > Pb > Cd sequence. To assess the degree of contamination, a geoaccumulation index (I_geo) is measured. Kendari Bay is not a contaminated area regarding Pb, Cd and Cr.     

The distribution and sources of heavy metals in Izmit Bay surface sediments affected by a polluted stream

Dil Deresi stream is a highly contaminated stream passing through the most heavily industrialized area of Izmit Bay. In this research, surface sediments in the <63-microm fraction collected from 34 sites at western part of Izmit Bay, Northeastern Marmara Sea, Turkey were analyzed by ICP-AES for Al, As, Cd, Co, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sn and Zn. Metal concentrations were compared with the marine sediment quality standards (SQS) and literature data to assess the pollution status of the sediments. Enrichment factors (EFs) were calculated to assess whether the concentrations observed represent background or contaminated levels. The analysis revealed three groups of elements: (1) Sn is the most enriched element; (2) As, Cd, Pb and Zn are minor enriched elements; and (3) Co, Cr, Cu, Fe, Mg, Mn and Ni are at background concentrations. The distribution maps of the concentrations and enrichment factors for all heavy metals were also produced as a contour plot based on Geographic Information System (GIS) technology.     

Heavy metal distribution in Newark Bay sediments

Bottom sediments have been analysed from Newark Bay, New Jersey, for zinc, lead, cadmium, and mercury. The bottom sediment analyses show that the bay sediments are enriched over background levels up to 65 times for zinc, 128 times for lead, 180 times for cadmium, and 155 times for mercury. Analyses of the metal distribution and of available tidal hydraulic data indicate the metal concentrations are due to a combination of source and tidal hydraulics. Dye tracer experiments gathering Lagrangiantype data appear to yield the best result in the investigation of metal trasport phenomena.     

湖泊沉积物中微量金属二次迁移过程中微生物作用的实验研究

蓄积在湖泊沉积物中污染物质某些情况下可以成为威胁上覆水体水质安全的二次污染源．根据贵州省阿哈湖季节性缺氧的特性,通过控制氧化还原状况,设计了对该湖沉积物-水柱的原样／抑菌条件的培养实验．实验发现,微生物活动对界面附近氧化还原反应具有控制作用;改变水体的含氧状况可以显著影响上覆水体水质,包括表观性状和水体中污染物含量．聚类分析结果表明,早期成岩过程中Mn,Ga,SO4 2-,Cu,Cr,Pb和Co,Ni,Fe,Sc,V,Rb两大类分别具有相似的地球化学行为．根据实验结果,计算了厌氧培养过程中,微量元素的最大释放量,发现铁、锰在厌氧过程中可以大量向水体释放．     

The distribution and sources of polycyclic aromatic hydrocarbons in Narragansett Bay surface sediments

Polycyclic aromatic hydrocarbons (PAHs) were measured in 41 surface sediments from Narragansett Bay, RI. All the analytes generally decrease down bay from the Seekonk, Providence and Taunton Rivers at the head of the bay. Total PAHs ranged from 0.569 to 216 microg/g with 27% exceeding the effects range median (ERM) of 44.8 microg/g and 73% of the stations exceeding the effects range low (ERL) of 4.02 microg/g (Long et al., 1995). Based on principal component analysis, the major source of the contaminants in Narragansett Bay was the Providence River while the coves and Taunton River/Mt. Hope Bay appeared to only have a limited influence on the open bay. PAH source ratios indicate that creosote and/or coal may be the most significant contributor of pyrogenic high molecular weight PAHs in Narragansett Bay, along with significant contributions from diesel exhaust.     

Spatial distribution of metals in sediments of the Ribeira Bay, Angra dos Reis, Rio de Janeiro, Brazil

This study aims to analyze the spatial distributions of several metals in sediments from five sites in Ribeira Bay, Brazil. Ribeira Bay is a very important area to the local community, due to its artisan fishery, and it also has a biological relevance for many marine species that use mangroves as nursery and feeding sites. According to the results, the area was not considered a metal polluted area. Despite not having a significant source of metals inside the Bay nowadays, Ilha Grande Bay harbors a shipyard, an oil terminal, and a commercial port, as well as two thermonuclear power plants (Angra I e II), all of which indirectly influence the study area.     

Baseline levels of heavy metals in the waters and sediments of Baffin Bay

Baseline levels of a number of trace metals have been determined in samples of water and sediment from Baffin Bay. Concentrations of Cr, Mn, Fe, Ni, Cu and Cd in the waters of Baffin Bay are generally lower than those observed in eastern Canadian coastal waters, levels being close to reported open ocean concentrations. Nearshore sediment samples, analysed for Cr, V, Mn, Ni, Co, Cu, Zn, Hg and Pb, display comparable concentrations to unpolluted muds in eastern Canadian coastal regions. Concentrations of these elements in the deep sediments of central Baffin Bay closely resemble levels in Atlantic Ocean deep-sea clays.     

Seasonal distribution of trace metals in suspended particulate and bottom sediments of four microtidal river estuaries,west coast of India

ABSTRACT

The seasonal distribution of metals (V, Cr, Co, Cu, Ni, Zn, Pb, Mn, Fe, Al and Ti) in suspended and bottom sediments of four minor estuaries (Terekhol, Chapora, Sal and Talpona rivers) of Goa, India was investigated to understand the metal distribution process in the estuarine region. The highest particulate-metal concentrations were found in low-salinity regions of all the estuaries, in the wet season (e.g. in the Terekhol River, the averages in ppm were Co: 53, Ni: 197, Cu: 208, Zn: 212 and Pb: 65) compared to the dry season averages (Co: 27, Ni: 76, Cu: 105, Zn: 164 and Pb: 13 ppm). The estuarine-mixing diagrams showed non-conservative behaviour in both seasons. The Sal River had the highest particulate-metal concentration (Co: 106, Ni: 300 and Zn: 323 ppm), suggesting an anthropogenic input. The enrichment factor for suspended matter was higher than bottom sediments with extremely high enrichment for Mn (>10). The Geo-accumulation index displayed unpolluted to polluted class for all metals. The study highlights the important role played by small estuaries in seasonal metal release and accumulation along the coastal region.     

Content and distribution of trace metals in surface sediments from the northern Bering Sea,Chukchi Sea and adjacent Arctic areas

Concentrations of trace metals (Zn, Cr, Cu, V, Cd and Pb), total organic carbon (TOC), black carbon (BC) and their granulometry were examined in 25 surface sediment samples from the northern Bering Sea, Chukchi Sea and adjacent areas. Trace metal concentrations in the sediments varied from 21.06–168.21 mg kg⁻¹ for Zn, 8.91–46.94 mg kg⁻¹ for Cr, 2.69–49.39 mg kg⁻¹ for Cu, 32.46–185.54 mg kg⁻¹ for V, 0.09–0.92 mg kg⁻¹ for Cd, and 0.95–15.25 mg kg⁻¹ for Pb. The geoaccumulation index (I_geo) indicated that trace metal contamination (Zn and Cd) existed in some stations of the study area. The distribution of grain size plays an important role in influencing the distribution of trace metals (Zn, Cr, Cu, V, and Pb) in sediments from the Chukchi Sea and adjacent areas.     

Unusual grain size effect on trace metals and organic matter in contaminated sediments

Grain size effect on trace metals (cadmium, copper, lead, zinc, and iron) and total organic content distribution in various fractions (<0.063, 0.063–0.105, 0.105–0.250, 0.250–0.500, and 0.500–1.000 mm) of contaminated sediment has been studied. Selective partitioning of the studied contaminants in sediment fractions was observed, with a minimum content in the fine sand fraction of grain size 0.125–0.250 mm. Anomalously high concentrations of trace metals and organic matter content in the medium and coarse sediment fractions (>0.250 mm) was explained by the formation of large agglomerates (clusters) during the generally recommended drying procedures. These large agglomerates, formed from smaller sediment fraction particles enriched by various contaminants kept on their large specific area by adsorption forces, have been observed in photographs of the medium and coarse sediment fractions only. The formed agglomerates consist of small particles cemented either by dissolved organic matter or by sea salts present in the marine sediment. The formation of such agglomerates should be taken into consideration when conducting metal contamination studies on sediments.     

Content and distribution of trace metals in surface sediments from the northern Bering Sea, Chukchi Sea and adjacent Arctic areas

Concentrations of trace metals (Zn, Cr, Cu, V, Cd and Pb), total organic carbon (TOC), black carbon (BC) and their granulometry were examined in 25 surface sediment samples from the northern Bering Sea, Chukchi Sea and adjacent areas. Trace metal concentrations in the sediments varied from 21.06-168.21 mg kg(-1) for Zn, 8.91-46.94 mg kg(-1) for Cr, 2.69-49.39 mg kg(-1) for Cu, 32.46-185.54 mg kg(-1) for V, 0.09-0.92 mg kg(-1) for Cd, and 0.95-15.25 mg kg(-1) for Pb. The geoaccumulation index (Igeo) indicated that trace metal contamination (Zn and Cd) existed in some stations of the study area. The distribution of grain size plays an important role in influencing the distribution of trace metals (Zn, Cr, Cu, V, and Pb) in sediments from the Chukchi Sea and adjacent areas.     

The spatial and temporal distribution of heavy metals in sediments of Victoria Harbour, Hong Kong

Victoria Harbour has received substantial loadings of pollutants from industrial and municipal wastewater discharged since the 1950s. Inputs of contaminants have declined dramatically during the last two decades as a result of better controls at the source and improved wastewater treatment facilities. To assess the spatial and temporal changes of metal contaminants in sediments in Victoria Harbour, core and grab sediments were collected. The central harbour areas were generally contaminated with heavy metals. The spatial distribution of trace metals can probably be attributed to the proximity of major urban and industrial discharge points, and to the effect of tidal flushing in the harbour. In the sediment cores, the highest concentrations of trace metals were observed to have accumulated during the 1950s-1980s, corresponding with the period of rapid urban and industrial development in Hong Kong. From the late 1980s, there has been a major decline in the concentrations of trace metals, due to a reduction in industrial activities and to the enactment of wastewater pollution controls in the territory. The Pb isotopic compositions of the sediments revealed the anthropogenic inputs of Pb to the harbour. The (206)Pb/(207)Pb ratios varied from 1.154 to 1.190, which were lower than those of background geological materials in Hong Kong ((206)Pb/(207)Pb: 1.201-1.279). The data also indicated that the Pb in the harbour sediments most likely originated from mixed sources, including the leaded gasoline used in the past and other anthropogenic sources.     

The spatial and temporal distribution of heavy metals in sediments of Victoria Harbour,Hong Kong

Victoria Harbour has received substantial loadings of pollutants from industrial and municipal wastewater discharged since the 1950s. Inputs of contaminants have declined dramatically during the last two decades as a result of better controls at the source and improved wastewater treatment facilities. To assess the spatial and temporal changes of metal contaminants in sediments in Victoria Harbour, core and grab sediments were collected. The central harbour areas were generally contaminated with heavy metals. The spatial distribution of trace metals can probably be attributed to the proximity of major urban and industrial discharge points, and to the effect of tidal flushing in the harbour. In the sediment cores, the highest concentrations of trace metals were observed to have accumulated during the 1950s–1980s, corresponding with the period of rapid urban and industrial development in Hong Kong. From the late 1980s, there has been a major decline in the concentrations of trace metals, due to a reduction in industrial activities and to the enactment of wastewater pollution controls in the territory. The Pb isotopic compositions of the sediments revealed the anthropogenic inputs of Pb to the harbour. The ²⁰⁶Pb/²⁰⁷Pb ratios varied from 1.154 to 1.190, which were lower than those of background geological materials in Hong Kong (²⁰⁶Pb/²⁰⁷Pb: 1.201–1.279). The data also indicated that the Pb in the harbour sediments most likely originated from mixed sources, including the leaded gasoline used in the past and other anthropogenic sources.