Abiotic formation of hydrocarbons under hydrothermal conditions: Constraints from chemical and isotope data

To understand reaction pathways and isotope systematics during mineral-catalyzed abiotic synthesis of hydrocarbons under hydrothermal conditions, experiments involving magnetite and CO₂ and H₂-bearing aqueous fluids were conducted at 400 °C and 500 bars. A robust technique for sample storage and transfer from experimental apparatus to stable isotope mass spectrometer provides a methodology for integration of both carbon and hydrogen isotope characterization of reactants and products generated during abiogenic synthesis experiments. Experiments were performed with and without pretreatment of magnetite to remove background carbon associated with the mineral catalyst. Prior to experiments, the abundance and carbon isotope composition of all carbon-bearing components were determined. Time-series samples of the fluid from all experiments indicated significant concentrations of dissolved CO and C₁-C₃ hydrocarbons and relatively large changes in dissolved CO₂ and H₂ concentrations, consistent with formation of additional hydrocarbon components beyond C₃. The existence of relatively high dissolved alkanes in the experiment involving non-pretreated magnetite in particular, suggests a complex catalytic process, likely involving reinforcing effects of mineral-derived carbon with newly synthesized hydrocarbons at the magnetite surface. Similar reactions may be important mechanisms for carbon reduction in chemically complex natural hydrothermal systems. In spite of evidence supporting abiotic hydrocarbon formation in all experiments, an “isotopic reversal” trend was not observed for ¹³C values of dissolved alkanes with increasing carbon number. This may relate to the specific mechanism of carbon reduction and hydrocarbon chain growth under hydrothermal conditions at elevated temperatures and pressures. Over time, significant ¹³C depletion in CH₄ suggests either depolymerization reactions occurring in addition to synthesis, or reactions between the C₁-C₃ hydrocarbons and carbon species absorbed on mineral surfaces and in solution.     

Experimental study of the hydrothermal reactivity of organic acids and acid anions: II. Acetic acid, acetate, and valeric acid

Organic acids and acid anions occur in substantial concentrations in many aqueous geologic fluids and are thought to take part in a variety of geochemical processes ranging from the transport of metals in ore-forming fluids to the formation of natural gas to serving as a metabolic energy source for microbes in subsurface habitats. The widespread occurrence of organic acids and their potential role in diverse geologic processes has led to numerous experimental studies of their thermal stability, yet there remain substantial gaps in our knowledge of the factors that control the rates and reaction pathways for the decomposition of these compounds under geologic conditions. In order to address some of these uncertainties, a series of laboratory experiments were conducted to examine the behavior of organic acids and acid anions under hydrothermal conditions in the presence of minerals. Reported here are results of experiments where aqueous solutions of acetic acid, sodium acetate, or valeric acid (n-pentanoic acid) were heated at 325°C, 350 bars in the presence of the mineral assemblages hematite + magnetite + pyrite, pyrite + pyrrhotite + magnetite, and hematite + magnetite. The results indicate that aqueous acetic acid and acetate decompose by a combination of two reaction pathways: decarboxylation and oxidation. Both reactions are promoted by minerals, with hematite catalyzing the oxidation reaction while magnetite catalyzes decarboxylation. The oxidation reaction is much faster, so that oxidation dominates the decomposition of acetic acid and acetate when hematite is present. In contrast to previous reports that acetate decomposed more slowly than acetic acid, we found that acetate decomposed at slightly faster rates than the acid in the presence of minerals. Although longer-chain monocarboxylic acids are generally thought to decompose by decarboxylation, valeric acid appeared to decompose primarily by “deformylation” to 1-butene plus formic acid. Subsequent decomposition of 1-butene and formic acid generated a variety of short-chain (≤C₄) hydrocarbons and moncarboxylic acids as well as CO₂. Valeric acid decomposition proceeded more rapidly (by a factor of 2) in the presence of hematite-magnetite-pyrite than with the other mineral assemblages, with the greater reaction rate apparently attributable to the effects of fluid chemistry. Valeric acid was observed to decompose at a substantially faster rate than acetic acid under similar conditions. The results suggest that decomposition of aqueous monocarboxylic acids may make a significant contribution to the conversion of petroleum to light hydrocarbons in natural gas and thermal fluids.     

The geochemical effects of benzene,toluene, and xylene (BTX) biodegradation

The geochemical effects of microbially mediated degradation of aromatic hydrocarbons were observed as changes in solution composition of an artificial groundwater in packed-sand laboratory columns. Benzene, toluene, and xylene, both individually and in a combined fashion, were used as substrates in biodegradation experiments conducted under oxygenated and anoxic conditions in columns filled with quartz, calcite, or Fe³⁺-coated quartz sand. Typically, column effluent had increased concentrations of dissolved inorganic C, decreased pH, and decreased concentrations of NO₃ and dissolved O₂ relative to column influent. Efficiency of CO₂ generation was similar for the three different substrates, ranging from 22.5 to 26.6% organic C converted to CO₂. When all three substrates were combined, the percentage of CO₂ produced fell within the range observed in the single substrate experiments. Nitrate disappearance was more varied as a function of substrate identity, with greatest amounts lost when toluene was the substrate. Calcite dissolved as a result of CO₂ generated during the biodegradation reactions, and empirically calculated dissolution rates varied between 1.9 and 4.0 x 10⁻⁹ mmol cm⁻² s⁻¹. The calcite dissolution rate was slower than the biodegradation rate, as evidenced by excess generation of CO₂ relative to Ca²⁺ production. The decrease in pH was less in experiments with calcite present than in those with quartz sand present due to buffering by calcite dissolution. Dissolution of Fe oxyhydroxides was not observed under any experimental conditions.     

The influence of carbon source on abiotic organic synthesis and carbon isotope fractionation under hydrothermal conditions

A series of laboratory experiments were performed to investigate the relative contributions of CO and other single-carbon compounds to abiotic synthesis of organic compounds in hydrothermal environments. Experiments were conducted by heating aqueous solutions of CO, CO₂, HCOOH, or CH₄ at 250 °C under reducing conditions, and observing production of CH₄ and other hydrocarbons. Native Fe was included in the experiments as a source of H₂ through reaction with water and as a potential catalyst. Experiments with CO or HCOOH as the carbon source resulted in rapid generation of CH₄ and other hydrocarbons that closely resembled typical products of Fischer-Tropsch organic synthesis. In contrast, experiments using CO₂ or CH₄ as the carbon source yielded no detectable hydrocarbon products. Carbon isotope measurements of reaction products from the CO experiments indicate that the CH₄ and other hydrocarbons were substantially depleted in ¹³C, with CH₄ δ¹³C values 30 to 34‰ lighter than the initial CO. Most of the fractionation apparently occurs during attachment of CO to the catalyst surface and subsequent reduction to surface-bound methylene. The initial step in polymerization of these methylene units to form hydrocarbons involves a small, positive fractionation, so that ethane and ethene are slightly enriched in ¹³C relative to CH₄. However, subsequent addition of carbon molecules to the growing hydrocarbon chain proceeds with no net observable fractionation, so that the isotopic compositions of the C₃₊ light hydrocarbons are controlled by isotopic mass balance. This result is consistent with a previously proposed model for carbon isotopic patterns of light hydrocarbons in natural samples. The abundance and isotopic composition of light hydrocarbons produced with HCOOH as the carbon source were similar to those generated with CO, but the isotopic compositions of non-volatile hydrocarbons diverged, suggesting that the higher hydrocarbons were formed by different mechanisms in the CO and HCOOH experiments. The experiments indicate that CO, and possibly HCOOH, may be critical intermediates in the abiotic formation of organic compounds in geologic environments, and suggest that the low levels of these compounds present in most hydrothermal systems could represent a bottleneck restricting the extent of abiotic organic synthesis in some circumstances.     

Crude oil in a shallow sand and gravel aquifer—III. Biogeochemical reactions and mass balance modeling in anoxic groundwater

Crude oil floating on the water table in a sand and gravel aquifer provides a constant source of hydrocarbons to the groundwater at a site near Bemidji, Minnesota. The degradation of hydrocarbons affects the concentrations of oxidized and reduced aqueous species in the anoxic part of the contaminant plume that developed downgradient from the oil body. The concentrations of Fe²⁺, Mn²⁺ and CH₄, Eh measurements, and the δ¹³C ratios of the total inorganic C indicate that the plume became more reducing ver a 5-a period. However, the size of the contaminant plume remained stable during this time. Field data coupled with laboratory microcosm experiments indicate that benzene and the alkylbenzenes are degraded in an anoxic environment. In anaerobic microcosm experiments conducted under field conditions, almost complete degradation (98%) was observed for benzene in 125 d and for toluene in 45 d. Concentrations of aqueous Fe²⁺ and Mn²⁺ increased in these experiments, indicating that the primary reactions were hydrocarbon degradation coupled with Fe and Mn reduction.Mass transfer calculations on a 40-m flowpath in the anoxic zone, downgradient from the oil body, indicated that the primary reactions in the anoxic zone are oxidation of organic compounds, precipitation of siderite and a ferroan calcite, dissolution of iron oxide and outgassing of CH₄ and CO₂. The major difference in the two models presented is the ratio of CO₂ and CH₄ that outgasses. Both models indicate quantitatively that large amounts of Fe are dissolved and reprecipitated as ferrous iron in the anoxic zone of the contaminant plume.     

Evolution of the chemistry of Fe bearing waters during CO2 degassing

The rates of Fe(II) oxidation and precipitation from groundwater are highly pH dependent. Elevated levels of dissolved CO₂ can depress pH and cause difficulty in removing dissolved Fe and associated metals during treatment of ferruginous water. This paper demonstrates interdependent changes in pH, dissolved inorganic C species, and Fe(II) oxidation rates that occur as a result of the removal (degassing) of CO₂ during aeration of waters discharged from abandoned coal mines. The results of field monitoring of aeration cascades at a treatment facility as well as batchwise aeration experiments conducted using net alkaline and net acidic waters in the UK are combined with geochemical modelling to demonstrate the spatial and temporal evolution of the discharge water chemistry. The aeration cascades removed approximately 67% of the dissolved CO₂ initially present but varying the design did not affect the concentration of Fe(II) leaving the treatment ponds. Continued removal of the residual CO₂ by mechanical aeration increased pH by as much as 2 units and resulted in large increases in the rates of Fe(II) oxidation and precipitation. Effective exsolution of CO₂ led to a reduction in the required lime dose for removal of remaining Fe(II), a very important factor with regard to increasing the sustainability of treatment practices. An important ancillary finding for passive treatment is that varying the design of the cascades had little impact on the rate of CO₂ removal at the flow rates measured.     

Thermal decarboxylation of acetic acid: Implications for origin of natural gas

Laboratory experiments on the thermal decarboxylation of solutions of acetic acid at 200°C and 300°C were carried out in hydrothermal equipment allowing for on-line sampling of both the gas and liquid phases for chemical and stable-carbon-isotope analyses. The solutions had ambient pH values between 2.5 and 7.1; pH values and the concentrations of the various acetate species at the conditions of the experiments were computed using a chemical model.Results show that the concentrations of acetic acid, and not total acetate in solution, control the reaction rates which follow a first order equation based on decreasing concentrations of acetic acid with time. The decarboxylation rates at 200°C (1.81 × 10^?8 per second) and 300°C (8.17 × 10^?8 per second) and the extrapolated rates at lower temperatures are relatively high. The activation energy of decarboxylation is only 8.1 kcal/mole. These high decarboxylation rates, together with the distribution of short-chained aliphatic acid anions in formation waters, support the hypothesis that acid anions are precursors for an important portion of natural gas.Results of the δ¹³C values of CO₂, CH₄, and total acetate show a reasonably constant fractionation factor of about 20 permil between CO₂ and CH₄ at 300°C. The δ¹³C values of CO₂ and CH₄ are initially low and become higher as decarboxylation increases.     

Degradation of dissolved organic monomers and short-chain fatty acids in sandy marine sediment by fermentation and sulfate reduction

The decay of a wide range of organic monomers (short-chain volatile fatty acids (VFA’s), amino acids, glucose and a pyrimidine) was studied in marine sediments using experimental plug flow-through reactors. The reactions were followed in the presence and absence of 10 mM SO₄²⁻. Degradation stoichiometry of individual monomers (inflow concentration of 6 mM organic C) was traced by measuring organic (VFA’s, amino acids) and inorganic (CO₂, NH₄⁺, SO₄²⁻) compounds in the outflow. Fermentation of amino acids was efficient and complete during passage through anoxic sediment reactors. Aliphatic amino acids (alanine, serine and glutamate) were primarily recovered as CO₂ (24-34%), formate (3-22%) and acetate (41-83%), whereas only ∼1/3 of the aromatic amino acid (tyrosine) was recovered as CO₂ (13%) and acetate (20%). Fermentation of glucose and cytosine was also efficient (78-86%) with CO₂ (30-35%), formate (3%) and acetate (28-33%) as the primary products. Fermentation of VFA’s (acetate, propionate and butyrate), on the other hand, appeared to be product inhibited. The presence of SO₄²⁻ markedly stimulated VFA degradation (29-45% efficiency), and these compounds were recovered as CO₂ (17% for butyrate to 100% for acetate) and acetate (51% and 82% for propionate and butyrate, respectively). When reaction stoichiometry during fermentation is compared with compound depletion during sulfate reduction, the higher proportion CO₂ recovery is consistent with lower acetate and formate accumulation. Our results therefore suggest that fermentation reactions mediate the initial degradation of added organic compounds, even during active sulfate reduction. Fermentative degradation stoichiometry also suggested significant H₂ production, and >50% of sulfate reduction appeared to be fuelled by H₂. Furthermore, our results suggest that fermentation was the primary deamination step during degradation of the amino acids and cytosine.     

Natural evidence for rapid abiogenic hydrothermal generation of CH4

Although recent hydrothermal experiments imply that abiogenic methane (CH₄) generation from hydrothermal reduction of CO₂ can occur, evidence from natural systems was still lacking. Based on the chemical and isotopic equilibrium signatures of low-temperature fumarolic gas discharges, we are able to provide hard evidence for its natural occurrence, namely in three subduction-related bi-phase hydrothermal systems of the Mediterranean, whose temperatures range from 260 to 470 °C. The attainment of equilibrium and the time spans of recent volcanic dormancy allowed us to calculate minimum rates for chemical and isotopic equilibration. These are significantly higher than those previously reported and might be due to the presence of a saturated water vapor phase in the investigated systems. The fact that nature provides conditions enabling relatively fast production of hydrocarbons from CO₂ strongly supports the concerns that were recently raised from laboratory experiments. These address the use of the carbon isotope composition of reduced carbon in Archean sediments as a tracer of early life and the occurrence of CH₄ on extraterrestrial planets as a bioindicator. In view of the potential role of abiogenic CH₄ as a precursor of life, we also present an estimate of abiogenic hydrothermal CH₄ fluxes throughout the Archean. It is not expected that these fluxes exceeded 80 Mt/yr during the past 4.0 Ga. This, however, would have been enough to facilitate HCN production on the prebiotic Earth.     

Initial behavior of granite in response to injection of CO2-saturated fluid

To understand the initial reactions of granite in a CO₂-saturated hydrothermal system, experiments were conducted using a batch-type autoclave over a temperature range of 100–350 °C at up to 250 bar and numerical computations of phase equilibria based on the experimental results were carried out. The experiments showed that the dissolution of granite and the deposition of secondary minerals were encouraged by the addition of CO₂. Solution chemistry and examination of the granite’s surface texture suggested that its initial dissolution is characterized by the release of Na and Ca (from the dissolution of plagioclase) and that initial precipitation occurs by deposition of some secondary minerals on to plagioclase and/or biotite in the CO₂-saturated system. However, the effect of CO₂ was small at 350 °C owing to the low activity of H₂CO₃. According to EDX analysis and numerical phase equilibrium calculations, the secondary minerals formed might be kaolinite, muscovite, smectite and calcite. That is, the granite as a whole might have the potential to take-up dissolved CO₂. The results suggest that the alteration of granite under CO₂-saturated hydrothermal conditions has the potential to capture CO₂ when it is injected at moderate temperatures (150–250 °C) into granite-hosted rock masses.     

Experimental investigation of single carbon compounds under hydrothermal conditions

The speciation of carbon in subseafloor hydrothermal systems has direct implications for the maintenance of life in present-day vent ecosystems and possibly the origin of life on early Earth. Carbon monoxide is of particular interest because it represents a key reactant during the abiotic synthesis of reduced carbon compounds via Fischer-Tropsch-type processes. Laboratory experiments were conducted to constrain reactions that regulate the speciation of aqueous single carbon species under hydrothermal conditions and determine kinetic parameters for the oxidation of CO according to the water water-gas shift reaction (CO₂ + H₂ = CO + H₂O). Aqueous fluids containing added CO₂, CO, HCOOH, NaHCO₃, NaHCOO, and H₂ were heated at 150, 200, and 300 °C and 350 bar in flexible-cell hydrothermal apparatus, and the abundances of carbon compounds was monitored as a function of time. Variations in fluid chemistry suggest that the reduction of CO₂ to CH₃OH under aqueous conditions occurs via a stepwise process that involves the formation of HCOOH, CO, and possibly CH₂O, as reaction intermediaries. Kinetic barriers that inhibit the reduction of CH₃OH to CH₄ allow the accumulation of reaction intermediaries in solution at high concentrations regulated by metastable thermodynamic equilibrium. Reaction of CO₂ to CO involves a two-step process in which CO₂ initially undergoes a reduction step to HCOOH which subsequently dehydrates to form CO. Both reactions proceed readily in either direction. A preexponential factor of 1.35 × 10⁶ s⁻¹ and an activation energy of 102 kJ/mol were retrieved from the experimental results for the oxidation of CO to CO₂. Reaction rates amongst single carbon compounds during the experiments suggest that ΣCO₂ (CO₂ + HCO₃⁻ + CO₃²⁻), CO, ΣHCOOH (HCOOH + HCOO⁻), and CH₃OH may reach states of redox-dependent metastable thermodynamic equilibrium in subseafloor and other hydrothermal systems. The abundance of CO under equilibrium conditions is strongly dependent on temperature, the total carbon content of the fluid, and host-rock lithology. If crustal residence times following the mixing of high-temperature hydrothermal fluids with cool seawater are sufficiently long, reequilibration of aqueous carbon can result in the generation of additional reduced carbon species such as HCOOH and CH₃OH, and the consumption of H₂. The present study suggests that abiotic reactions involving aqueous carbon compounds in hydrothermal systems are sufficiently rapid to influence metabolic pathways utilized by organisms that inhabit vent environments.     

Far from equilibrium enstatite dissolution rates in alkaline solutions at earth surface conditions

Far from equilibrium enstatite dissolution rates both open to atmospheric CO₂ and CO₂ purged were measured as a function of solution pH from 8 to 13 in batch reactors at room temperature. Congruent dissolution was observed after an initial period of incongruent dissolution with preferential Si release from the enstatite. Steady-state dissolution rates in open to atmospheric CO₂ conditions decrease with increase in solution pH from 8 to 12 similar to the behavior reported by other investigators. Judging from the pH 13 dissolution rate, rates increase with pH above pH 12. This is thought to occur because of the increase in overall negative surface charges on enstatite as Mg surface sites become negative above pH 12.4, the pH of zero surface charge of MgO.Steady-state dissolution rates of enstatite increase above pH 10 when CO₂ was purged by performing the experiments in a N₂ atmosphere. This suggests inhibition of dissolution rates above pH 10 when experiments were open to the atmosphere. The dissolved carbonate in these solutions becomes dominantly CO₃²⁻ above pH 10.33. It is argued that CO₃²⁻ forms a >Mg₂-CO₃ complex at positively charged Mg surface sites on enstatite, resulting in stabilization of the surface Si-O bonds. Therefore, removal of solution carbonate results in an increase in dissolution rates of enstatite above pH 10. The log rate of CO₂-purged enstatite dissolution in moles per cm² per s as a function of increasing pH above pH 10 is equal to 0.35. This is consistent with the model of silicate mineral dissolution in the absence of surface carbonation in alkaline solutions proposed earlier in the literature.     

Microbial dissolution of calcite at T = 28 °C and ambient pCO2

This study used batch reactors to quantify the mechanisms and rates of calcite dissolution in the presence and absence of a single heterotrophic bacterial species (Burkholderia fungorum). Experiments were conducted at T = 28°C and ambient pCO₂ over time periods spanning either 21 or 35 days. Bacteria were supplied with minimal growth media containing either glucose or lactate as a C source, NH₄⁺ as an N source, and H₂PO₄⁻ as a P source. Combining stoichiometric equations for microbial growth with an equilibrium mass-balance model of the H₂O-CO₂-CaCO₃ system demonstrates that B. fungorum affected calcite dissolution by modifying pH and alkalinity during utilization of ionic N and C species. Uptake of NH₄⁺ decreased pH and alkalinity, whereas utilization of lactate, a negatively charged organic anion, increased pH and alkalinity. Calcite in biotic glucose-bearing reactors dissolved by simultaneous reaction with H₂CO₃ generated by dissolution of atmospheric CO₂ (H₂CO₃ + CaCO₃ → Ca²⁺ + 2HCO₃⁻) and H⁺ released during NH₄⁺ uptake (H⁺ + CaCO₃ → Ca²⁺ + HCO₃⁻). Reaction with H₂CO₃ and H⁺ supplied ∼45% and 55% of the total Ca²⁺ and ∼60% and 40% of the total HCO₃⁻, respectively. The net rate of microbial calcite dissolution in the presence of glucose and NH₄⁺ was ∼2-fold higher than that observed for abiotic control experiments where calcite dissolved only by reaction with H₂CO₃. In lactate bearing reactors, most H⁺ generated by NH₄⁺ uptake reacted with HCO₃⁻ produced by lactate oxidation to yield CO₂ and H₂O. Hence, calcite in biotic lactate-bearing reactors dissolved by reaction with H₂CO₃ at a net rate equivalent to that calculated for abiotic control experiments. This study suggests that conventional carbonate equilibria models can satisfactorily predict the bulk fluid chemistry resulting from microbe-calcite interactions, provided that the ionic forms and extent of utilization of N and C sources can be constrained. Because the solubility and dissolution rate of calcite inversely correlate with pH, heterotrophic microbial growth in the presence of nonionic organic matter and NH₄⁺ appears to have the greatest potential for enhancing calcite weathering relative to abiotic conditions.     

Using dissolved gas analysis to investigate the performance of an organic carbon permeable reactive barrier for the treatment of mine drainage

The strongly reducing nature of permeable reactive barrier (PRB) treatment materials can lead to gas production, potentially resulting in the formation of gas bubbles and ebullition. Degassing in organic C based PRB systems due to the production of gases (primarily CO₂ and CH₄) is investigated using the depletion of naturally occurring non-reactive gases Ar and N₂, to identify, confirm, and quantify chemical and physical processes. Sampling and analysis of dissolved gases were performed at the Nickel Rim Mine Organic Carbon PRB, which was designed for the treatment of groundwater contaminated by low quality mine drainage characterized by slightly acidic pH, and elevated Fe(II) and SO₄ concentrations. A simple 4-gas degassing model was used to analyze the dissolved gas data, and the results indicate that SO₄ reduction is by far the dominant process of organic C consumption within the barrier. The data provided additional information to delineate rates of microbially mediated SO₄ reduction and confirm the presence of slow and fast flow zones within the barrier. Degassing was incorporated into multicomponent reactive transport simulations for the barrier and the simulations were successful in reproducing observed dissolved gas trends.     

Geochemistry of volatile organic compounds in seawater: Mesocosm experiments with 14C-model compounds

A series of ten radiotracer experiments were conducted in controlled experimental ecosystems (mesocosms) to investigate the behavior of volatile organic compounds (VOC) in seawater. Time-series measurements of the redistribution of ¹⁴C-activity within several major pools—dissolved, particulate, intermediate metabolite, and CO₂—in the ecosystem made possible an evaluation of the rates of processes—volatilization, biodegradation, Sorption and sedimentation—acting to remove VOC from seawater in summer. The behavior of the model ¹⁴C-VOC fell into three categories. Aromatic hydrocarbons (benzene, toluene, naphthalene) were subject to both volatilization and biodegradation, with mineralization dominating in summer. Chlorinated C₂-hydrocarbons (tetrachloroethylene) and chlorinated benzenes (chlorobenzene, 1,4-dichlorobenzene, and 1,2,4-trichlorobenzene) were affected only by volatilization and were relatively resistant to biodegradation. Of all the model VOC studied, only aliphatic hydrocarbons (decane and octadecane) were sorbed onto suspended paniculate matter; however, the primary route of loss from the water column appeared to be biodegradation rather than sedimentation. The mesocosm-derived removal rate constants were then applied to estimate summer VOC residence times in Narragansett Bay, Rhode Island of about 1 day for aromatic hydrocarbons, 1 week for the chlorinated VOC and about 1 day for aliphatic hydrocarbons. Residence times in winter might be on the order of 1 week for all VOC.     

Dissolution of basalts and peridotite in seawater, in the presence of ligands, and CO2: Implications for mineral sequestration of carbon dioxide

Steady-state silica release rates (r_Si) from basaltic glass and crystalline basalt of similar chemical composition as well as dunitic peridotite have been determined in far-from-equilibrium dissolution experiments at 25 °C and pH 3.6 in (a) artificial seawater solutions under 4 bar pCO₂, (b) varying ionic strength solutions, including acidified natural seawater, (c) acidified natural seawater of varying fluoride concentrations, and (d) acidified natural seawater of varying dissolved organic carbon concentrations. Glassy and crystalline basalts exhibit similar r_Si in solutions of varying ionic strength and cation concentrations. Rates of all solids are found to increase by 0.3-0.5 log units in the presence of a pCO₂ of 4 bar compared to CO₂ pressure of the atmosphere. At atmospheric CO₂ pressure, basaltic glass dissolution rates were most increased by the addition of fluoride to solution whereas crystalline basalt rates were most enhanced by the addition of organic ligands. In contrast, peridotite does not display any significant ligand-promoting effect, either in the presence of fluoride or organic acids. Most significantly, Si release rates from the basalts are found to be not more than 0.6 log units slower than corresponding rates of the peridotite at all conditions considered in this study. This difference becomes negligible in seawater suggesting that for the purposes of in-situ mineral sequestration, CO₂-charged seawater injected into basalt might be nearly as efficient as injection into peridotite.     

Dissolution kinetics of selected natural minerals relevant to potential CO2-injection sites – Part 2: Dissolution and alteration of carbonates and feldspars in CO2-bearing brines

Chemical interaction processes among injected CO₂, saline fluids and potential reservoir materials are experimentally simulated to derive dissolution rates of natural materials (minerals) that can be used as input parameters for modeling of CO₂ storage in deep saline formations and risk analyses. In order to study dissolution processes, mineral aliquots were exposed to CO₂-bearing brines at elevated temperature (60, 100, 150 °C) and pressure (85 bar) and at various run durations. Several potential reservoir rocks include carbonates as cement. Calcite and dolomite grains were therefore mainly used as solid starting material. Experiments with the two feldspar varieties alkali feldspar and almost pure anorthite were performed in addition. Grain sizes of the mineral starting materials varied between <63 μm and 500 μm with most experiments performed at grain size fractions of 160 – 250 μm and 250 – 500 μm. All experiments run with a complex synthetic brine (total dissolved solids: ∼156 g/l) according to a natural upper cretaceous formation water. Dry ice was used as CO₂-source. All experiments were done in closed batch reactors. These reactors allow mimicking reservoir conditions far from the injection site as well as reservoir conditions after finishing the CO₂ injection. The concentration changes during the experiment were monitored by ICP-OES measurements of the initial and the post-run fluids. Dissolution rates were derived based on the concentration changes of the brine.Most of the studied experimental variables and parameters (temperature, run duration, grain size, brine composition – expressed as pH-value and ionic strength) impact alteration of the reacting agents, i.e. they change the chemical composition of the brine, change the surfaces of the mineral aliquots exposed to the CO₂-bearing brine, and induce formation of secondary minerals. Hence, all influencing parameters on dissolution processes have to be considered and time-resolved changes of the dissolution behavior have to be implemented in numerical simulations of processes at CO₂ injection sites and CO₂ storage reservoirs.     

Characterization of elemental release during microbe-granite interactions at T = 28 °C

This study used batch reactors to characterize the mechanisms and rates of elemental release (Al, Ca, K, Mg, Na, F, Fe, P, Sr, and Si) during interaction of a single bacterial species (Burkholderia fungorum) with granite at T = 28 °C for 35 days. The objective was to evaluate how actively metabolizing heterotrophic bacteria might influence granite weathering on the continents. We supplied glucose as a C source, either NH₄ or NO₃ as N sources, and either dissolved PO₄ or trace apatite in granite as P sources. Cell growth occurred under all experimental conditions. However, solution pH decreased from ∼7 to 4 in NH₄-bearing reactors, whereas pH remained near-neutral in NO₃-bearing reactors. Measurements of dissolved CO₂ and gluconate together with mass-balances for cell growth suggest that pH lowering in NH₄-bearing reactors resulted from gluconic acid release and H⁺ extrusion during NH₄ uptake. In NO₃-bearing reactors, B. fungormum likely produced gluconic acid and consumed H⁺ simultaneously during NO₃ utilization.Over the entire 35-day period, NH₄-bearing biotic reactors yielded the highest release rates for all elements considered. However, chemical analyses of biomass show that bacteria scavenged Na, P, and Sr during growth. Abiotic control reactors followed different reaction paths and experienced much lower elemental release rates compared to biotic reactors. Because release rates inversely correlate with pH, we conclude that proton-promoted dissolution was the dominant reaction mechanism. Solute speciation modeling indicates that formation of Al-F and Fe-F complexes in biotic reactors may have enhanced mineral solubilities and release rates by lowering Al and Fe activities. Mass-balances further reveal that Ca-bearing trace phases (calcite, fluorite, and fluorapatite) provided most of the dissolved Ca, whereas more abundant phases (plagioclase) contributed negligible amounts. Our findings imply that during the incipient stages of granite weathering, heterotrophic bacteria utilizing glucose and NH₄ only moderately elevate silicate weathering reactions that consume atmospheric CO₂. However, by enhancing the dissolution of non-silicate, Ca-bearing trace minerals, they could contribute to high Ca/Na ratios commonly observed in granitic watersheds.     

The relationship between total dissolved carbon dioxide and its stable carbon isotope ratio in aquatic sediments

A model is constructed to predict the stable carbon isotope ratio of the total dissolved CO₂ in aquatic sediments and laboratory reactors. The major parameters of the model are the fractionation between CO₂ and CH₄ as well as the intra-molecular fractionation of acetate, the relative production of CH₄ from CO₂ reduction versus acetate fermentation, the net production ratio of CO₂ to CH₄ and the stable carbon isotope ratio of the source organic carbon. The model is fitted to published data and to date from the littoral sediments of Lake Memphremagog, Quebec, Canada. The inclusion of the intra-molecular fractionation factor of acetate in the model provides a good fit to the data; without this factor, the values of the other parameters necessary for a good fit appear unreasonable.     

CO2, 13C/12C and H2O variability in natural basaltic glasses: a study comparing stepped heating and ftir spectroscopic techniques

A comparison of two independent techniques was used to assess the homogeneity of CO₂ and H₂O concentrations in a number of natural basaltic glasses. Variations in carbon concentration and isotopic ratio were determined by comparison of stepped heating data obtained in two different laboratories. Dissolved volatile concentrations were also obtained by stepped heating and Fourier Transform Infrared (FTIR) spectroscopy. Replicate stepped heating analyses of a mid-ocean ridge basaltic glass show that the concentration and ¹³C/¹²C of bulk magmatic and dissolved CO₂ vary by less than ±10% and ±0.5‰, respectively. A similar degree of correlation is observed for replicate stepped heating analyses of Mariana Trough glasses conducted in two different laboratories. Dissolved CO₂ concentrations determined by stepped heating also correlate well with concentrations measured by FTIR spectroscopy. The correspondence of results obtained in these experiments provide an upper limit to the degree of natural variation in concentrations and isotopic ratios of these volatiles in basaltic glasses and suggest that intrinsic, magmatic carbon has a relatively homogeneous distribution in these glasses. Water concentrations determined through extraction by heating and FTIR also show excellent agreement.