首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
The development of an anomalously deep rift appears to be a common characteristic of the evolution of microplates along the East Pacific Rise, including the Galapagos, Easter, and Juan Fernandez microplates. We investigate crustal rifting at Endeavor Deep on the Juan Fernandez microplate using bathymetry, gravity and side scan sonar data. An initial phase of lithospheric extension accompanied by extensive subsidence results in the formation of a very deep rift valley (up to 4 km of relief, 70 km long and 20 km wide). Morphological observations and gravity data derived from GEOSAT satellite altimetry show the subsequent initiation of crustal accretion and development of a mature spreading center. Recent models of the kinematics of microplate rotation allow the amount of opening across Endeavor Deep over the past 1 m.y. to be quantified. We develop a simple mechanical model of rifting involving block faulting and flexural response to explain the gravity signature over the rift valley. The Bouguer gravity anomaly is asymmetric with respect to the surface topography and requires that a shallow-dipping fault on the western wall of the valley dominate the extension at Endeavor Deep. Consideration of three similar microplate rift valleys leads us to suggest that asymmetric rifting is the characteristic process forming microplate deeps.  相似文献   

2.
TAIGER project deep-penetration seismic reflection profiles acquired in the northeastern South China Sea (SCS) provide a detailed view of the crustal structure of a very wide rifted continental margin. These profiles document a failed rift zone proximal to the shelf, a zone of thicker crust 150 km from the shelf, and gradually thinning crust toward the COB, spanning a total distance of 250–300 km. Such an expanse of extended continental crust is not unique but it is uncommon for continental margins. We use the high-quality images from this data set to identify the styles of upper and lower crustal structure and how they have thinned in response to extension and, in turn, what rheological variations are predicted that allow for protracted crustal extension. Upper crustal thinning is greatest at the failed rift (βuc ≈ 7.5) but is limited farther seaward (βuc ≈ 1–2). We interpret that the lower crust has discordantly thinned from an original 15–17 km to possibly less than 2–3 km thick beneath the central thick crust zone and more distal areas. This extreme lower crustal thinning indicates that it acted as a weak layer allowing decoupling between the upper crust and the mantle lithosphere. The observed upper crustal thickness variations and implied rheology (lower crustal flow) are consistent with large-scale boudinage of continental crust during protracted extension.  相似文献   

3.
A tectonostratigraphic model for the evolution of rift basins has been built, involving three distinct stages of basin development separated by key unconformities or unconformity complexes. The architecture and signature of the sediment infill for each stage are discussed, with reference to the northern North Sea palaeorift system. The proto-rift stage describes the rift onset with either doming or flexural subsidence. In the case of early doming, a proto-rift unconformity separates this stage from the subsequent main rift stage. Active stretching and rotation of fault blocks during the rift stage is terminated by the development of the syn-rift unconformity. Where crustal separation is accomplished, a break-up unconformity commonly marks the boundary to the overlying thermal relaxation or post-rift stage. Tabular architectures, thickening across relatively steep faults, characterize the proto-rift stage. Syn-rift architectures are much more variable. Depending on the ability of the sediment supply to fill the waxing and waning accommodation created during rotation and subsidence, one-, two- or three-fold lithosome architectures are likely to develop. During the post-rift stage, an early phase with coarse clastic infilling of remnant rift topography often precedes late stage widening of the basin and filling with fine-grained sediments.  相似文献   

4.
The Pearl River Mouth Basin is one of the most favorable areas for gas exploration on the northern slope of the South China Sea. Differences of fault patterns between shelf and slope are obvious. In order to investigate the tectonic evolution, five series of analogue modeling experiments were compared. The aim of this study is to investigate how crustal thickness influences fault structures, and compare this to the observed present-day fault structures in the Pearl River Mouth Basin. The initial lithospheric rheological structure can be derived from the best fit between the modeled and observed faults. The results indicate. (1) Different initial crustal rheological structures can produce different rift structures in the Pearl River Mouth Basin. (2) We also model that the Baiyun Sag in the southern Pearl River Mouth Basin may have had a thinned crust before rifting compared to the rest of the basin. (3) The thickness ratio of brittle to ductile crust in southern Pearl River Mouth Basin is less than normal crust, suggesting an initially hot and weak lithosphere. (4) Slightly south of the divergent boundary magma may have taken part in the rifting process during the active rift stage.  相似文献   

5.
Four uniformly spaced regional gravity traverses and the available seismic data across the western continental margin of India, starting from the western Indian shield extending into the deep oceanic areas of the eastern Arabian Sea, have been utilized to delineate the lithospheric structure. The seismically constrained gravity models along these four traverses suggest that the crustal structure below the northern part of the margin within the Deccan Volcanic Province (DVP) is significantly different from the margin outside the DVP. The lithosphere thickness, in general, varies from 110–120 km in the central and southern part of the margin to as much as 85–90 km below the Deccan Plateau and Cambay rift basin in the north. The Eastern basin is characterised by thinned rift stage continental crust which extends as far as Laxmi basin in the north and the Laccadive ridge in the south. At the ocean–continent transition (OCT), crustal density differences between the Laxmi ridge and the Laxmi basin are not sufficient to distinguish continental as against an oceanic crust through gravity modeling. However, 5-6 km thick oceanic crust below the Laxmi basin is a consistent gravity option. Significantly, the models indicate the presence of a high density layer of 3.0 g/cm3 in the lower crust in almost whole of the northern part of the region between the Laxmi ridge and the pericontinental northwest shield region in the DVP, and also below Laccadive ridge in the southern part. The Laxmi ridge is underlain by continental crust upto a depth of 11 km and a thick high density material (3.0 g/cm3) between 11–26 km. The Pratap ridge is indicated as a shallow basement high in the upper part of the crust formed during rifting. The 15 –17 km thick oceanic crust below Laccadive ridge is seen further thickened by high density underplated material down to Moho depths of 24–25 km which indicate formation of the ridge along Reunion hotspot trace.  相似文献   

6.
High-resolution sub-bottom (3.5 kHz) traverses of the southwestern portion of the Balearic Abyssal Plain between North Africa and the Balearic block show an irregular topography where rates of deformation appear to locally exceed those of sedimentation. The basin is underlain by salt of Messinian age, and diapirism has disturbed post-Messinian sediments. The 3.5 kHz records, augmented by 30,000 Joule seismic reflection profiles, indicate that this diapirism is continuing at present and is even now significantly deforming the uppermost sediment sequences.A high concentration of structural features including doming and the development of rim synclines within the 35–60 m of section penetrated are associated with diapirism. Over 70% of the domes have penetrated the surface in the studied area; of these, most display a relief of 10 m or more. In some instances, domes apparently act as dams behind which sediment is ponded. Non-faulted relief averages 3–4 m/km, notable for an abyssal plain surface. Frequently, the uppermost Holocene strata are offset several meters as a result of normal faults and grabens. This concentration of sea-floor irregularities necessarily modifies the present-day sediment dispersal pattern and rules out the uniform flow of turbidity currents and lateral continuity of sedimentation units across this basin plain.  相似文献   

7.
The tectonic development of a continental margin is recorded in the stratigraphic successions preserved along and across the margin in terms of stratal relationships (e.g., onlap, downlap, truncation), lithofacies, biostratigraphy, and paleo-water depths. By using these observations coupled to a kinematic and flexural model for the deformation of the lithosphere, we have elucidated the tectonic significance of the preserved stratigraphy that comprises the Gabon-Cabinda margin of west Africa. Two hinge zones, an Eastern and Atlantic, formed along the Gabon-Cabinda margin in response to three discrete extensional events occuring from Berriasian to Aptian time. The Eastern hinge zone demarcates the eastern limit of a broadly distributed Berriasian extension that resulted in the formation of deep anoxic, lacustrine systems as evidenced by the silts and shales of the Sialivakou and lower Djeno Formations and the regressive packages of the upper Djeno Formation. Approximately 1.5 to 2 km of asymmetric footwall uplift was induced across the Eastern hinge zone in response to the mechanical unloading of the lithosphere during this first phase of rifting. In contrast, the Atlantic hinge, located approximately 90 km west of the Eastern hinge, marks the eastern limit of a second phase of extension that began in the Hauterivian. Footwall uplift and rotation exposed earlier syn-rift and pre-rift sediments to at least wavebase causing varying amounts of erosional truncation across the Atlantic hinge zone along much of the Gabon-Cabinda margins. We interpret the thickness variations of reworked clastic sediment of this age (e.g. the Melania Formation) between the hinge zones as indicative of variations in the degree of uplift and erosional truncation of the Atlantic hinge. For example, the absence of Melania Formation across the Congo margin implies that uplift of the Atlantic hinge was relatively minor compared to that across the Cabinda and Gabon margins, the latter being characterized by significant thicknesses of Melania Formation (or equivalent). Material eroded from the Cabinda and Gabon Atlantic hinge zone may in part account for the thick wedge of sediment deposited seaward of the Gabon-Cabinda Atlantic hinge (the Erva Formation). Our modelling suggests that this wedge of reworked elastics represents deposition by along-axis gravity flows within a deep water (≈2 km) environment. A third and final phase of extension in the late Barremian-early Aptian was responsible for breaching the continental lithosphere to form the ocean/continent boundary and thus the installation of open marine conditions. Elsewhere, the environments will tend to be marginal marine to brackish, depending on the efficiency of the Atlantic hinge zone to act as a barrier to marine enchroachment. This third rift phase reactivated both the Eastern and Atlantic hinge0zones thereby creating accomodation for the Marnes Noires Formation (and equivalent) source rock deposition between the hinges and the Falcão source rock equivalent seaward of the Atlantic hinge. Two possible scenarios exist for the lateral distribution of the Marnes Noires Formation. If the reactivated rift flank topography across the Atlantic hinge was significant, then sedimentation would be restricted between the hinge zones within discrete lacustrine settings (e.g., Congo margin). Alternatively, if hinge zone uplift was relatively minor, then a coral-rimmed archipelago may have developed parallel to the margin with restricted communication across the Atlantic hinge zone (e.g., Cabinda margin). In this latter scenario, dilution of the Marnes Noires source rocks by terrigenous input from the eroding Atlantic hinge zone should be relatively minor thereby enhancing source rock quality. Furthermore, potential marine upwelling outboard of the Atlantic hinge zone is likely the cause for the production and accumulation of organic-rich material associated with the Falcão source rock of the Kwanza basin. By late Aptian time, the remaining accomodation between the hinge zones was partially filled by across- and along-axis prograding deltaic systems of the Argilles Vertes and Tchibota Formations. The progradation and interaction of the Argilles Vertes depositional lobes resulted in the formation of residual paleo-relief. Subsequent marine incursions and flooding of this paleo-relief led to the development of basal conglomerates (the Chela ‘lag’ unconformity) grading upward into fine-grained sands and evaporites. Consequently, an inverse relationship should exist betweeb evaporite thickness (in particular, the lower members) and the thickness of the underlying Argilles Vertes and Tchibota Formations. Variations in Loeme evaporite thickness is a consequence of stratigraphic and structural control with salt instability influencing local variability.Our modelling suggests the occurrence of two distinct evaporite sequences on the Congo margin, an earlier evaporite deposited seaward (west) of the Atlantic hinge during the second and third rift phases and the late Aptian Loeme Formation deposited between the hinge zones. An evaporite sequence seaward of the Atlantic hinge is inferred on the basis of extensive diapirs and salt tectonic structures observed in seismic data. In order to match the distribution and thickness of the observed post-salt stratigraphy across the basin, however, we require large paleowater depths west of the Atlantic hinge during the later Aptian. The existence of large paleowater depths precludes the formation of thick evaporite sequences within the outer basin. Consequently, we propose that the evaporites seaward of the Atlantic hinge were formed during the syn-rift development of the margin and are not contemporaneous with the post-rift Loeme salts deposited between the hinge zones. This double salt hypothesis is consistent with observations from the conjugate Brazilian margin.  相似文献   

8.
Two dimensional crustal models derived from four different ocean bottom seismographic (OBS) surveys have been compiled into a 1,580 km long transect across the North Atlantic, from the Norwegian Møre coast, across the extinct Aegir Ridge, the continental Jan Mayen Ridge, the presently active Kolbeinsey Ridge north of Iceland, into Scoresby Sund in East Greenland. Backstripping of the transect suggests that the continental break-up at ca. 55 Ma occurred along a west-dipping detachment localized near the western end of a ca. 300 km wide basin thinned to less than 20 km crustal thickness. It is likely that an east-dipping detachment near the present day Liverpool Land Escarpment was active during the late stages of continental rifting. A lower crustal high-velocity layer (7.2–7.4 km/s) interpreted as mafic intrusions/underplating, was present beneath the entire basin. The observations are consistent with the plume hypothesis, involving the Early Tertiary arrival of a mantle plume beneath central Greenland and focused decompression melting beneath the thinnest portions of the lithosphere. The mid-Eocene to Oligocene continental extension in East Greenland is interpreted as fairly symmetric and strongly concentrated in the lower crustal layer. Continental break-up which rifted off the Jan Mayen Ridge, occurred at ca. 25 Ma, when the Aegir Ridge became extinct. The first ca. 2 m.y. of oceanic accretion along the Kolbeinsey Ridge was characterized by thin magmatic crust (ca. 5.5 km), whereas the oceanic crustal formation since ca. 23 Ma documents ca. 8 km thick crust and high magma budget.  相似文献   

9.
The present-day basement depth of the seafloor in the absence of sediment loading was inferred along a traverse crossing the Southern Tyrrhenian Basin. A correction for sediment loading was proposed on the basis of density, seismic velocity and porosity data from selected deep boreholes. The empirical relation between sediment correction and seismic two-way travel time was extrapolated downward by applying the Nafe–Drake curve and a specific porosity–depth relation. The sediment loading response of the basement calculated for flexural isostasy is on average about one hundred meters lower than results for local isostasy. A pure lithosphere extensional model was then used to predict quantitatively the basement subsidence pattern on the margins of the basin. The basement depth is consistent with uniform extension model predictions only in some parts of the margins. The observed variability in the region of greatest thinning (transition from continental to oceanic crust) is attributable to the weakening effect caused by diffuse igneous intrusions. Subsidence of the volcanic Calabrian–Sicilian margin is partly accounted for by magmatic underplating. The comparison of the calculated subsidence with an oceanic lithosphere cooling model shows that subsidence is variable in some areas, particularly in the Marsili Basin. This argues for a typical back-arc origin for the Tyrrhenian Basin, as a result of subduction processes. By taking into account the geodynamic setting, stratigraphic data from the deepest hole and the terrestrial heat flow, we reconstructed the paleotemperatures of cover sediments. The results suggest that low temperatures generally have prevailed during sediment deposition and that the degree of maturation is expected not to be sufficient for oil generation processes.  相似文献   

10.
This study proposed a new reconstruction of the tectono-sedimentary evolution of the Lake Albert Rift based on a biostratigraphical, sedimentological and structural re-evaluation of the outcropping data and on an exceptional subsurface dataset. The infilling of the rift consists of lacustrine deposits wherein two major unconformities dated at 6.2 Ma and 2.7 Ma were characterized, coeval with major subsidence and climatic changes. Combined with the fault analysis, the evolution and distribution of the subsidence highlights a four-steps evolution of the rift after its initiation dated at 17.0 Ma. The first phase (17.0 – 6.2 Ma) consists of low and diffuse extension associated with low accommodation rates ranging from 150 to 200 m/Ma. Restricted in the southern part of the basin, the depocenter location is poorly controlled by faults, meaning that the basin extension was potentially larger at this time. The second time interval (6.2 – 2.7 Ma) shows an increase of accommodation rates with values reaching more than 800 m/Ma. These high rates combined with the location of the major depocenters down the bounding faults argue for a first true rifting phase. Between 2.7 Ma and 0.4 Ma, the accommodation rates decreases to reach less than 400 m/Ma and the individualization of major depocenters continue down the major fault in the southern and northwestern parts of the basin. Finally, between 0.4 Ma and present-day, a late uplift led the formation of the Ugandan scarp. Comparison of the Lake Albert Rift evolution with the data available in the rifts of both branches of the East African Rift System shows that most of the sedimentary basins experienced the same geometrical evolution from large basins with limited fault control during Late Miocene to narrow true rift in Late Pleistocene.  相似文献   

11.
High-quality seismic data document a Maastrichtian-Paleocene rift episode on the Vøring margin lasting for 20 m.y. prior to continental breakup. The rift structures are well imaged in the Fenris Graben and Gjallar Ridge region in the western Vøring Basin, and are characterized by low-angle detachment faults with variable fault geometries from south to north. The structural restoration has facilitated the division of pre- and syn-rift sediments across the extensional terrain, which is subsequently used to evaluate mode and mechanism for the lithospheric deformation. Extension estimates based on the structural restoration, subsidence analysis and crustal thickness evaluations yield stretching factors ranging between 1.5 to 2.3 across the main fault zone just landward of the early Tertiary flood basalts. The structural restoration also shows that a middle crustal dome structure, observed beneath the low-angle faults, can be explained by extensional unroofing. Thus, the dome structure may represent a possible metamorphic core complex. Calculations of the effects on vertical motion, assuming uniform and two-layer differential stretching models combined with the arrival of the Iceland mantle plume during rifting, indicate that the uniform extension model may account for both observed early rift subsidence and subsequent late rift uplift and erosion. Although the differential model can not be excluded, it implies early rift uplift which is not compatible with our seismic interpretation. The direct and indirect effects of the Iceland mantle plume may have caused as much as 1.2 km of late rift uplift. Comparison of the volcanic Vøring margin and the non-volcanic West Iberian margin shows similarities in terms of structural style as well as in mode and distribution of extension.  相似文献   

12.
We present results from a SeaMARC II bathymetry, gravity, and magnetics survey of the northern end of the large-offset propagating East Rift of the Easter microplate. The East Rift is offset by more than 300 km from the East Pacific Rise and its northern end has rifted into approximately 3 Ma lithosphere of the Nazca Plate forming a broad (70–100 km) zone of high (up to 4 km) relief referred to as the Pito Rift. This region appears to have undergone distributed and asymmetric extension that has been primarily accommodated tectonically, by block faulting and tilting, and to a lesser degree by seafloor spreading on a more recently developed magmatic accretionary axis. The larger fault blocks have dimensions of 10–15 km and have up to several km of throw between adjacent blocks suggesting that isostatic adjustments occur on the scale of the individual blocks. Three-dimensional terrain corrected Bouguer anomalies, a three-dimensional magnetic inversion, and SeaMARC II backscatter data locate the recently developed magmatic axis in an asymmetric position in the western part of the rift. The zone of magmatic accretion is characterized by an axis of negative Bouguer gravity anomalies, a band of positive magnetizations, and a high amplitude magnetization zone locating its tip approximately 10 km south of the Pito Deep, the deepest point in the rift area. Positive Bouguer gravity anomalies and negative magnetizations characterize the faulted area to the east of the spreading axis supporting the interpretation that this area consists primarily of pre-existing Nazca plate that has been block faulted and stretched, and that no substantial new accretion has occurred there. The wide zone of deformation in the Pito Rift area and the changing trend of the fault blocks from nearly N-S in the east to NW-SE in the west may be a result of the rapidly changing kinematics of the Easter microplate and/or may result from ridge-transform like shear stresses developed at the termination of the East Rift against the Nazca plate. The broad zone of deformation developed at the Pito Rift and its apparent continuation some distance south along the East Rift has important implications for microplate mechanics and kinematic reconstructions since it suggests that initial microplate boundaries may consist in part of broad zones of deformation characterized by the formation of lithospheric scale fault blocks, and that what appear to be pseudofaults may actually be the outer boundaries of tectonized zones enclosing significant amounts of stretched pre-existing lithosphere.  相似文献   

13.
The GALO system for basin modeling is applied for numerical reconstruction of the thermal history of the lithosphere of the Western Basin and the Shatsky and Andrusov rises in the Black Sea. The modeling showed that the variant of the thermal evolution of the lithosphere of the region that was used by us for the Eastern Basin in our previous study is also applicable to the thermal evolution of the lithosphere of various tectonically different structures of the deep-water part of the Black Sea. These structures include both the Western and Eastern basins of the sea characterized by a granite-free crust formed in the course of the back-arc spreading and the Shatsky and Andrusov rises with the continental type of crust. The proposed version of the lithosphere evolution in the deep-water part of the Black Sea implies the initial stage of quasi-rift heating in the Upper Cretaceous and the three-staged thermal activation of the plate in the Cenozoic accompanied by three successive stages of crustal thinning. The latter resulted in the gradual deepening of the sea down to the present-day depth of 2.2 km.  相似文献   

14.
Seismic reflection data imaging conjugate crustal sections at the South China Sea margins result in a conceptual model for rift-evolution at conjugate magma-poor margins in time and space.The wide Early Cenozoic South China Sea rift preserves the initial rift architecture at the distal margins. Most distinct are regular undulations in the crust–mantle boundary. Individual rift basins are bounded to crustal blocks by listric normal faults on either side. Moho uplifts are distinct beneath major rift basins, while the Moho is downbended beneath crustal blocks, with a wavelength of undulations in the crust–mantle boundary that approximately equals the thickness of the continental crust. Most of the basin-bounding faults sole out within the middle crust. At the distal margins, detachment faults are located at a mid-crustal level where a weak zone decouples crust and mantle lithosphere during rifting. The lower crust in contrast is interpreted as being strong. Only in the region within about 50 km from the Continent–Ocean Transition (COT) we suggest that normal faults reach the mantle, enabling potentially a coupling between the crust and the mantle. Here, at the proximal margins detachment fault dip either seaward or landward. This may indicate the presence of exhumed mantle bordering the continental margins.Post-rift shallow-water platform carbonates indicate a delay in subsidence during rifting in the South China Sea. We propose that this is an inherent process in highly extended continental margins and a common origin may be the influx of warm asthenospheric material into initially cool sub-lithospheric mantle.On a crustal-scale largely symmetric process predominate in the initial rifting stage. At the future COT either of the rift basin-bounding faults subsequently penetrates the entire crust, resulting in asymmetry at this location. However, asymmetric deformation which is controlled by large scale detachment faulting is confined to narrow areas and does not result in a margin-wide simple-shear model. Rather considerable along-margin variations are suggested resulting in alternating “upper and lower plate” margins.  相似文献   

15.
The NW-SE striking Otway Basin in southeastern Australia is part of the continental rift system that formed during the separation of Australia from Antarctica. The development of this sedimentary basin occurred in two phases of Late Jurassic-Early Cretaceous and Late Cretaceous rifting. The evolution of this basin is mainly associated with extensional processes that took place in a pre-existing basement of Archean, Proterozoic to Paleozoic age. In this study, the total amounts of extension and stretching factor (β factor) have been measured for six transects across the entire passive margin of the Otway Basin region. The results show significant variation in extensional stretching along the basin, with the smallest stretching factors in the easternmost (β = 1.73, 1.9) and westernmost part of the basin (β = 2.09), and the largest stretching factors in the central part (β = 2.14 to 2.44). The domain with the lowest β factor is underlain mostly by thicker lithosphere of the Delamerian Orogen and older crustal fragments of the Selwyn Block. In contrast, the region with the largest β factor and amount of extension is related to younger and thinner lithosphere of the Lachlan Orogen. The main basement structures have been mapped throughout eastern South Australia and Victoria to examine the possible relationships between the younger pattern of extensional faults and the older basement fabrics. The pattern of normal faults varies considerably along onshore and offshore components of the Otway Basin from west to east. It appears that the orientation of pre-existing structures in the basement has some control on the geometry of the younger normal faults across the Otway Basin, but only in a limited number of places. In most areas the basement fabric has no control on the younger faulting pattern. Basement structure such as the north-south Coorong Shear Zone seems to affect the geometry of normal faults by changing their strike from E-W to NW-SE and also, in the easternmost part of the basin, the Bambra Fault changes the strike of normal faults from NW-SE to the NE-SW. Our results imply that the properties of the continental lithosphere exert a major influence on the β factor and amount of crustal extension but only a minor influence on the geometry of extensional faults.  相似文献   

16.
In this study, we construct a 3-D shear wave velocity structure of the crust and upper mantle in South China Sea and its surrounding regions by surface wave dispersion analysis. We use the multiple filter technique to calculate the group velocity dispersion curves of fundamental mode Rayleigh and Love waves with periods from 14 s to 120 s for earthquakes occurred around the Southeast Asia. We divide the study region (80° E–140° E, 16° S–32° N) into 3° × 3° blocks and use the constrained block inversion method to get the regionalized dispersion curve for each block. At some chosen periods, we put together laterally the regionalized group velocities from different blocks at the same period to get group velocity image maps. These maps show that there is significant heterogeneity in the group velocity of the study region. The dispersion curve of each block was then processed by surface wave inversion method to obtain the shear wave velocity structure. Finally, we put the shear wave velocity structures of all the blocks together to obtain the three-dimensional shear wave velocity structure of crust and upper mantle. The three-dimensional shear wave velocity structure shows that the shear wave velocity distribution in the crust and upper mantle of the South China Sea and its surrounding regions displays significant heterogeneity. There are significant differences among the crustal thickness, the lithospheric thickness and the shear wave velocity of the lid in upper mantle of different structure units. This study shows that the South China Sea Basin, southeast Sulu Sea Basin and Celebes Sea Basin have thinner crust. The thickness of crust in South China Sea Basin is 5–10 km; in Indochina is 25–40 km; in Peninsular Malaysia is 30–35 km; in Borneo is 30–35 km; in Palawan is 35 km; in the Philippine Islands is 30–35 km, in Sunda Shelf is 30–35 km, in Southeast China is 30–40 km, in West Philippine Basin is 5–10 km. The South China Sea Basin has a lithosphere with thickness of about 45–50 km, and the shear wave velocity of its lid is about 4.3–4.7 km/s; Indochina has a lithosphere with thickness of about 55–70 km, and the shear wave velocity of its lid is about 4.3–4.5 km/s; Borneo has a lithosphere with thickness of about 55–60 km, and the shear wave velocity of its lid is about 4.1–4.3 km/s; the Philippine Islands has a lithosphere with thickness of about 55–60 km, and the shear wave velocity of its lid is about 4.2–4.3 km/s, West Philippine Basin has a lithosphere with thickness of about 50–55 km, and the shear wave velocity of its lid is about 4.7–4.8 km/s, Sunda Self has a lithosphere with thickness of about 55–65 km, and the shear wave velocity of its lid is about 4.3 km/s. The Red-River Fault Zone probably penetrates to a depth of at least 200 km and is plausibly the boundary between the South China Block and the Indosinia Block.  相似文献   

17.
The Cenozoic East African Rift System (EARS) is an exceptional example of active continental extension, providing opportunities for furthering our understanding of hydrocarbon plays within rifts. It is divided into structurally distinct western and eastern branches. The western branch comprises deep rift basins separated by transfer zones, commonly localised onto pre-existing structures, offering good regional scale hydrocarbon traps. At a basin-scale, local discrete inherited structures might also play an important role on fault localisation and hydrocarbon distribution. Here, we consider the evolution of the Central basin of the Malawi Rift, in particular the influence of pre-existing structural fabrics.Integrating basin-scale multichannel 2D, and high resolution seismic datasets we constrain the border, Mlowe-Nkhata, fault system (MNF) to the west of the basin and smaller Mbamba fault (MF) to the east and document their evolution. Intra basin structures define a series of horsts, which initiated as convergent transfers, along the basin axis. The horsts are offset along a NE–SW striking transfer fault parallel to and along strike of the onshore Karoo (Permo-Triassic) Ruhuhu graben. Discrete pre-existing structures probably determined its location and, oriented obliquely to the extension orientation it accommodated predominantly strike-slip deformation, with more slowly accrued dip-slip.To the north of this transfer fault, the overall basin architecture is asymmetric, thickening to the west throughout; while to the south, an initially symmetric graben architecture became increasingly asymmetric in sediment distribution as strain localised onto the western MNF. The presence of the axial horst increasingly focussed sediment supply to the west. As the transfer fault increased its displacement, so this axial supply was interrupted, effectively starving the south-east while ponding sediments between the western horst margin and the transfer fault. This asymmetric bathymetry and partitioned sedimentation continues to the present-day, overprinting the early basin symmetry and configuration. Sediments deposited earlier become increasingly dissected and fault juxtapositions changed at a small (10–100 m) scale. The observed influence of basin-scale transfer faults on sediment dispersal and fault compartmentalization due to pre-existing structures oblique to the extension orientation is relevant to analogous exploration settings.  相似文献   

18.
We focus on the northern Ligurian margin, at the geological junction of the subalpine domain and the Ligurian oceanic basin, in order (1) to identify the location of the southern limit of the Alpine compressive domain during the Cenozoic, and (2) to study the influence of a compressive environment on the tectonic and sedimentary evolution of a passive margin.Based on published onshore and offshore data, we first propose a chronology of the main extensional and compressional regional tectonic events.High-resolution seismic data image the margin structure down to ∼3 km below seafloor. These data support that past rifting processes control the present-day margin structure, and that 2800-4000 m of synrift sediment was deposited on this segment of the margin in two steps. First, sub-parallel reflectors indicate sediment deposition within a subsident basin showing a low amount of extension. Then, a fan-shaped sequence indicates block tilting and a higher amount of extension. We do not show any influence of the Miocene Alpine compression on the present-day margin structure at our scale of investigation, despite the southern subalpine relief formed in the close hinterland at that time. The southern front of the Miocene Alps was thus located upslope from the continental margin.Finally, a comparison with the Gulf of Lions margin suggests that the tectonic influence of the Alpine compression on the rifting processes is restrited to an increase of the subsidence related to flexure ahead of the Alpine front, explaining abnormally high synrift thicknesses in the study area. The Alpine environment, however, has probably controlled the sedimentary evolution of the margin since the rifting. Indeed, sediment supply and distribution would be mainly controlled by the permanent building of relief in the hinterland and by the steep basin morphology, rather than by sea-level fluctuations, even during the Messinian sea-level low-stand.  相似文献   

19.
大陆岩石圈在张裂和分离时的变形模式   总被引:4,自引:0,他引:4  
通过对南海南北共轭边缘地壳剖面的对比研究,发现大陆岩石圈的物理性质是分层的:上、中地壳呈脆性,下地壳表现出塑性,而岩石圈上地幔则仍呈脆性。因此,在它受张性应力场作用时,其变形和破裂分离方式也是分层进行的:上、中地壳能发生犁式断裂,产生的断块沿断面转动在地表产生一系列半地堑,并使地壳厚度减薄;如拉张应力继续作用时,上、中地壳将沿犁式断裂被拉开,从而形成上、下板块边缘,并彼此分开。下地壳则发生塑性变形,使地壳厚度减薄,并最终将其拉断。岩石圈上地幔亦可产生陡倾断裂,形成的断块沿断面转动亦使其厚度减薄,并最终沿陡倾断裂被拉断。这就是我们称之为岩石圈变形和破裂分 离时的分层变形及分层破裂分离模式。  相似文献   

20.
In most of the studies devoted to the analysis of the thermal regime of the Black Sea basins, the high sedimentation rate is regarded to be the principal reason for the low values of the surface heat flow as compared to the deep flow. We used the basin modeling technique for a more detailed assessment of this issue with regard to the new geological and geophysical data on the age and structure of the sedimentary cover and basement of the Black Sea basins. The use of enhanced seismic data, together with a more accurate estimation of the age limits of the sedimentary sequences in the region, allowed us to refine the results of the previous studies. Based on the calculations performed for an actual cross section with actual properties of the sedimentary rocks under compaction and the basement rocks, it is shown that any version of the sedimentation and evolution of the basin compatible with the geological and geophysical data available lead to heat flow values that are significantly greater than those actually observed. Our analysis proves that the sedimentation alone, as was implied in the previous studies, cannot explain the decrease in the deep heat flow at the floor surface down to values of about 34 mW/m2. It is shown that the temperature influence of the invasion of dense though heated waters of the Mediterranean Sea that occurred about 7000 years ago helps one to explain the low present-day heat flow values in the deep-water parts of the Western and Eastern basins of the Black Sea. The application of the basin modeling technique allowed us to pose a version of the thermal evolution of the lithosphere in the Western basin of the Black Sea compatible with the high heat flow at the end of the Cretaceous, with three stages of subsidence of the sea floor down to its present-day depths, and with the low heat flow values measured in the basin. According to the geophysical data, this version implies a relatively high-temperature present-day thermal regime in the basin’s lithosphere with a lithosphere thickness of about 60 km.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号