Post-glacial seismic stratigraphy, central Great Barrier Reef, Australia

A regional programme of continuous seismic (boomer) profiling in the central Great Barrier Reef Province has identified a widespread shallow seismic discontinuity (reflector A) which is interpreted as the pre-Holocene surface. Nine seismic facies units are distinguished primarily on the basis of the seismic records, but also with the aid of additional criteria such as location and surface sediment types. Two units underlie reflector A and are pre-Holocene. These units are interpreted as: (a) Permo-Carboniferous bedrock, and (b) Pleistocene/? Tertiary sediments, consisting of both shelf-wide terrigenous units, and carbonate mounds and platforms under present reefs. Seven units are post-glacial and overlie reflector A. These units are interpreted as: (c) fluvial/estuarine channel fill, (d) relict delta-front deposits, (e) relict transgressive veneer, (f) coastal coarse and (g) fine deposits, (h) modern reef and (i) reef talus. In general post-glacial sediment cover is very thin and in many places on the mid-shelf the pre-Holocene units crop out. Substantial post-glacial accumulations are limited to protected coastal embayments and to offshore reef masses.     

Proximal–distal facies relationships and sedimentary processes in a storm dominated carbonate ramp (Kimmeridgian,northwest of the Iberian Ranges,Spain)

Facies analysis of the upper Kimmeridgian rocks in the outcrops located near Ricla (Zaragoza province, northeast Spain) and the integration of the resultant data in a broader context (the northern part of the Iberian Basin), has produced two general models showing the facies distribution and the processes that controlled the sedimentation in the Kimmeridgian carbonate ramp. Using these two models the transition from shallow to relatively deep environments of the carbonate ramp is examined in detail. Model 1 corresponds to the development of a mixed carbonate-siliciclastic ramp during a slow rise and stillstand of sea level (Sequence 1-HST), whereas Model 2 represents the growth of a pure carbonate ramp during a rapid rise of sea level (Sequence 2-TST).Carbonate production was higher in the shallow ramp domains (coral reefs and oolitic shoals in Model 1 and reefs in Model 2) than in deeper domains, where there is no indication of significant pelagic or benthic production. The activity of unidirectional return flows induced by winter storms and hurricanes, played an important role in the redistribution of the sediment across the ramp, generating different coarse-grained deposits. In the inner and mid-ramp settings dunes, lower scale bedforms and tempestites occur in Model 1, and storm lobes, bars and tempestites in Model 2. Moreover, a significant bulk of the carbonate mud produced in shallow areas would eventually be resedimented in the outer ramp as suspended load in the density currents. Stillstand of sea level in Model 1 involved a rapid progradation of the inner and proximal mid-ramp carbonate and siliciclastic facies. The rapid relative sea level rise of Model 2 is determined by the dominance of the carbonate facies and by the presence of aggradational geometries in the transitional area between shallow and deep-ramp domains. The presence of relatively thick sections in the outer-ramp settings (instead of condensed sections, as observed in Model 1) during times of sea level rise (Model 2) can mainly be explained by the increase of the shallow production in the reef dominated areas.     

Combination Patterns and Depositional Characteristics of Ordovician Carbonate Banks in the Western Tarim Basin,China

The combination patterns and depositional characteristics of the carbonate banks are investigated based on outcrop sections, thin sections, and carbon isotopes of Ordovician in the western Tarim Basin, China. Four carbonate bank combination patterns are deposited in the Ordovician, western Tarim Basin, including: Reef-Bank Complex (RBC), Algae-Reef-Bank Interbed (ARBI), Thick-Layer Cake Aggradation Bank (TLCAB), and Thin-Layer Cake Retrogradation Bank (TLCRB). All combination patterns show clear periods vertically. The RBC is mainly composed of reefs and bioclastic banks, and the dimension of the RBC depends on the scale of the reefs. Bioclastic banks deposits surround the reefs. The range of the ARBI is determined by the scale of algae-reefs, algae peloid dolomite microfacies and algal dolomite microfacies deposit alternating vertically. TLCAB and TLCRB are deposited as layer-cakes stacking in cycles and extending widely with cross bedding developed. The grains of TLCAB and TLCRB are diverse and multi-source. With the impacting of relative sea level change, biological development and geomorphology, the ARBI, TLCAB or TLCRB, RBC are successively developed from the Lower Ordovician Penglaiba Formation to the Middle Ordovician Yijianfang Formation. The depositional environment analysis of Ordovician indicates that the RBC and ARBI can form effective oil and gas reservoirs, and the TLCAB and TLCRB have the potential to form the huge scale oil and gas reservoirs and to be the crucial targets of exploration for the Ordovician carbonate banks in the future.     

Tertiary facies architecture in the Kutai Basin,Kalimantan, Indonesia

The Kutai Basin occupies an area of extensive accommodation generated by Tertiary extension of an economic basement of mixed continental/oceanic affinity. The underlying crust to the basin is proposed here to be Jurassic and Cretaceous in age and is composed of ophiolitic units overlain by a younger Cretaceous turbidite fan, sourced from Indochina. A near complete Tertiary sedimentary section from Eocene to Recent is present within the Kutai Basin; much of it is exposed at the surface as a result of the Miocene and younger tectonic processes. Integration of geological and geophysical surface and subsurface data-sets has resulted in re-interpretation of the original facies distributions, relationships and arrangement of Tertiary sediments in the Kutai Basin. Although much lithostratigraphic terminology exists for the area, existing formation names can be reconciled with a simple model explaining the progressive tectonic evolution of the basin and illustrating the resulting depositional environments and their arrangements within the basin. The basin was initiated in the Middle Eocene in conjunction with rifting and likely sea floor spreading in the Makassar Straits. This produced a series of discrete fault-bounded depocentres in some parts of the basin, followed by sag phase sedimentation in response to thermal relaxation. Discrete Eocene depocentres have highly variable sedimentary fills depending upon position with respect to sediment source and palaeo water depths and geometries of the half-graben. This contrasts strongly with the more regionally uniform sedimentary styles that followed in the latter part of the Eocene and the Oligocene. Tectonic uplift documented along the southern and northern basin margins and related subsidence of the Lower Kutai Basin occurred during the Late Oligocene. This subsidence is associated with significant volumes of high-level andesitic–dacitic intrusive and associated volcanic rocks. Volcanism and uplift of the basin margins resulted in the supply of considerable volumes of material eastwards. During the Miocene, basin fill continued, with an overall regressive style of sedimentation, interrupted by periods of tectonic inversion throughout the Miocene to Pliocene.     

Evolution of a trench-slope basin within the Cascadia subduction margin: the Neogene Humboldt Basin, California

The Neogene Humboldt (Eel River) Basin is located along the north-eastern margin of the Pacific Ocean within the Cascadia subduction zone. This sedimentary basin originated near the base of the accretionary prism in post-Eocene time. Subduction processes since that time have elevated strata in the south-eastern portion of the basin above sea level. High-resolution chronostratigraphic data from the onshore portion of the Humboldt Basin enable correlation of time-equivalent lithofacies across the palaeomargin, reconstruction of slope-basin evolution, and preliminary delineation of climatic and tectonic influence on lithological variation. Emergent basin fill is divided into five lithofacies which clearly document shoaling of the inner trench slope from deep-water environments in early Miocene time to paralic environments in Pleistocene time. The oldest strata consist of hemipelagic mudstones and minor debris-flow breccias deposited in a deep-water setting during elevated sea level. These strata are overlain by glauconite-rich, fine-grained turbidites which heralded an increasing influx of terrigenous detritus. Water depths shoaled earlier in the eastern basin area as the palaeoshoreline prograded seaward. Turbidite deposition ceased in the eastern basin area at about 2-2 Ma, whereas 22 km to the west, turbidite deposition continued until about 1-8 Ma. Lithofacies at the western study site change abruptly across a middle Pleistocene unconformity from outer shelf to paralic deposits. In the east, a more complete Pleistocene section records transition from outer to inner shelf, beach and fluvial environments. The Humboldt Basin lithofacies sequence is overprinted by eustatic control of sediment source. Comparison of sediment character with palaeoceanographic conditions indicates dominance of hemipelagic facies during periods of elevated sea level in the middle Miocene and early Pliocene when depocentres were isolated from terrigenous sediment. Glauconite-rich facies were mobilized from an upper slope setting following these periods of elevated sea level and redeposited in a deep-marine environment. Pleistocene shoreline lithofacies display glacio-esutatic control of depositional environment by recording several cycles of nearshore to fluvial progressions. General models of accretionary prism behaviour and trench-slope basin evolution are compatible with the overall coarsening-upward lithofacies sequence filling the Humboldt Basin. Early structural barriers precluded deposition of terrigenous material except from locally derived debris flows; subsequent shoaling and burial of deactivated thrust-folds enabled turbidity flows to reach the basin floor. However, late-stage tectonism apparently controlled the onset of coarse-grained deposition in this sequence. Significant sand-rich turbidite deposition began in the middle Pliocene, synchronous with tectonic uplift of the southern basin margin. Conversely, cessation of turbidite deposition in the eastern basin area in latest Pliocene time was synchronous with growth of anticlinal structures which again blocked widespread dispersal of turbidity flows. This middle Pliocene to Holocene period of crustal shortening is synchronous with continued reduction in spreading rate along the southern Juan de Fuca ridge, and probably reflects partial coupling between the subducting lithosphere and the overlying accretionary prism.     

Carbonate sediments of Elizabeth and Middleton Reefs close to the southern limits of reef growth in the southwest Pacific

Elizabeth and Middleton Reefs are atoll-like structures that have developed on top of volcanic edifices and are close to the southern environmental limit of reef development in the southwest Pacific. Reef morphology and vertical accretion rates during the Holocene appear similar to those on other more tropical reefs. Sediment samples were collected from the lagoon of both reefs and around the flanks of Middleton Reef. A distinctly chlorozoan assemblage was observed with coral, molluscs, Halimeda, coralline algae and foraminifers being the dominant sediment constituents. Lagoon sediment samples show little variation within or between reefs, lacking the concentric zonation characteristic of larger atolls. Samples collected from the flanks of Middleton Reef, and subsurface material from vibrocores, differ compositionally from the surficial lagoon sand and were typically more tropical in character. A comparison of the sediment constituents from these reefs with those of samples from within a fringing reef and from the shelf around Lord Howe Island, further south, indicated regional patterns in sediment composition. Halimeda rapidly decreased in abundance with increased latitude, and appeared confined to deeper water, whereas coralline red algae increased significantly. The rapid change in these major sediment contributors is coincident with the general decrease in coral growth rates with latitude. This reinforces the notion that the latitudinal limit of reef development is constrained by factors other than coral growth alone.     

南海盆地演化对生物礁的控制及礁油气藏勘探潜力分析

南海盆地经历了断陷、坳陷和区域热沉降等演化过程。古新世—早渐新世,包括南沙地块在内的古南海北部陆缘的岩石圈伸展作用导致断陷湖盆的形成,局部遭受海侵。该期仅在古南海北部陆架和陆坡地区具备形成生物礁的条件。晚渐新世—中中新世,由于洋壳扩张南海盆地形成,南沙地块漂移到现今位置。随着海水大面积入侵,早期形成的断阶高部位成为水下隆起,岩石圈伸展引起的地幔岩浆喷发,形成水下火山高地,为生物礁的形成创造了地形地貌条件。在物源供给不足的地区,出现适于生物礁发育的温暖、透光、洁净、具有正常盐度的浅水环境,生物礁繁盛。从南海盆地演化和生储盖等地层层系形成时间上看,生物礁具有有利的生储盖配置关系和油气运聚条件。晚中新世-全新世区域热沉降形成全区统一的区域盖层,南海生物礁油气藏得以保存。上述情况决定了南海盆地生物礁具有很大的油气勘探潜力。     

Complex rift geometries resulting from inheritance of pre-existing structures: Insights and regional implications from the Barmer Basin rift

Structural studies of the Barmer Basin in Rajasthan, northwest India, demonstrate the important effect that pre-existing faults can have on the geometries of evolving fault systems at both the outcrop and basin-scale. Outcrop exposures on opposing rift margins reveal two distinct, non-coaxial extensional events. On the eastern rift margin northwest–southeast extension was accommodated on southwest- and west-striking faults that form a complex, zig-zag fault network. On the western rift margin northeast–southwest extension was accommodated on northwest-striking faults that form classical extensional geometries.Combining these outcrop studies with subsurface interpretations demonstrates that northwest–southeast extension preceded northeast–southwest extension. Structures active during the early, previously unrecognised extensional event were variably incorporated into the evolving fault systems during the second. In the study area, an inherited rift-oblique fault transferred extension from the rift margin to a mid-rift fault, rather than linking rift margin fault systems directly. The resultant rift margin accommodation structure has important implications for early sediment routing and depocentre evolution, as well as wider reaching implications for the evolution of the rift basin and West Indian Rift System. The discovery of early rifting in the Barmer Basin supports that extension along the West Indian Rift System was long-lived, multi-event, and likely resulted from far-field plate reorganisations.     

On the tectonic origin of Iberian topography

The present-day topography of the Iberian peninsula can be considered as the result of the Mesozoic–Cenozoic tectonic evolution of the Iberian plate (including rifting and basin formation during the Mesozoic and compression and mountain building processes at the borders and inner part of the plate, during the Tertiary, followed by Neogene rifting on the Mediterranean side) and surface processes acting during the Quaternary. The northern-central part of Iberia (corresponding to the geological units of the Duero Basin, the Iberian Chain, and the Central System) shows a mean elevation close to one thousand meters above sea level in average, some hundreds of meters higher than the southern half of the Iberian plate. This elevated area corresponds to (i) the top of sedimentation in Tertiary terrestrial endorheic sedimentary basins (Paleogene and Neogene) and (ii) planation surfaces developed on Paleozoic and Mesozoic rocks of the mountain chains surrounding the Tertiary sedimentary basins. Both types of surfaces can be found in continuity along the margins of some of the Tertiary basins. The Bouguer anomaly map of the Iberian peninsula indicates negative anomalies related to thickening of the continental crust. Correlations of elevation to crustal thickness and elevation to Bouguer anomalies indicate that the different landscape units within the Iberian plate can be ascribed to different patterns: (1) The negative Bouguer anomaly in the Iberian plate shows a rough correlation with elevation, the most important gravity anomalies being linked to the Iberian Chain. (2) Most part of the so-called Iberian Meseta is linked to intermediate-elevation areas with crustal thickening; this pattern can be applied to the two main intraplate mountain chains (Iberian Chain and Central System) (3) The main mountain chains (Pyrenees and Betics) show a direct correlation between crustal thickness and elevation, with higher elevation/crustal thickness ratio for the Central System vs. the Betics and the Pyrenees. Other features of the Iberian topography, namely the longitudinal profile of the main rivers in the Iberian peninsula and the distribution of present-day endorheic areas, are consistent with the Tertiary tectonic evolution and the change from an endorheic to an exorheic regime during the Late Neogene and the Quaternary. Some of the problems involving the timing and development of the Iberian Meseta can be analysed considering the youngest reference level, constituted by the shallow marine Upper Cretaceous limestones, that indicates strong differences induced by (i) the overall Tertiary and recent compression in the Iberian plate, responsible for differences in elevation of the reference level of more than 6 km between the mountain chains and the endorheic basins and (ii) the effect of Neogene extension in the Mediterranean margin, responsible for lowering several thousands of meters toward the East and uplift of rift shoulders. A part of the recent uplift within the Iberian plate can be attributed of isostatic uplift in zones of crustal thickening.     

The hydrodynamic and sedimentary setting of nearshore coral reefs, central Great Barrier Reef shelf, Australia: Paluma Shoals, a case study

The Great Barrier Reef (GBR) shelf contains a range of coral reefs on the highly turbid shallow inner shelf, where interaction occurs with terrigenous sediments. The modern hydrodynamic and sedimentation regimes at Paluma Shoals, a shore‐attached ‘turbid‐zone’ coral reef, and at Phillips Reef, a fringing reef located 20 km offshore, have been studied to document the mechanisms controlling turbidity. At each reef, waves, currents and near‐bed turbidity were measured for a period of ≈1 month. Bed sediments were sampled at 135 sites. On the inner shelf, muddy sands are widespread, with admixed terrigenous and carbonate gravel components close to the reefs and islands, except on their relatively sheltered SW side, where sandy silty clays occur. At Paluma Shoals, the coral assemblage is characteristic of inner‐shelf or sheltered habitats on the GBR shelf (dominated by Galaxea fascicularis, up to >50% coral cover) and is broadly similar to that at Phillips Reef, further offshore and in deeper water. The sediments of the Paluma Shoals reef flats consist of mixed terrigenous and calcareous gravels and sands, with intermixed silts and clays, whereas the reef slope is dominated by gravelly quartz sands. The main turbidity‐generating process is wave‐driven resuspension, and turbidity ranges up to 175 nephelometric turbidity units (NTU). In contrast, at Phillips Reef, turbidity is <15 NTU and varies little. At Paluma Shoals, turbidity of >40 NTU probably occurs for a total of >40 days each year, and relatively little time is spent at intermediate turbidities (15–50 NTU). The extended time spent at either low or high turbidities is consistent with the biological response of some species of corals to adopt two alternative mechanisms of functioning (autotrophy and heterotrophy) in response to different levels of turbidity. Sedimentation rates over periods of hours may reach the equivalent of 10 000 times the mean global background terrigenous flux (BTF) of sediment to the sea floor, i.e. 10 000 BTF, over three orders of magnitude greater than the Holocene average for Halifax Bay of <3 BTF. As elsewhere along the nearshore zone of the central GBR, dry‐season hydrodynamic conditions form a primary control upon turbidity and the distribution of bed sediments. The location of modern nearshore coral reefs is controlled by the presence of suitable substrates, which in Halifax Bay are Pleistocene and early Holocene coarse‐grained (and relatively stable) alluvial deposits.     

Reef geometries, erosion surfaces and high-frequency sea-level changes, upper Miocene Reef Complex, Mallorca, Spain

The upper Miocene Reef Complex of Mallorca is a 20-km prograding unit which crops out in sea cliffs along the southern side of the island. These vertical and exceptionally clean outcrops permit: (i) identification of different facies (lagoon, reef front, reef slope and open platform) and their geometries and boundaries at different scales, ranging from metre to kilometre, and (ii) construction of a 6-km-long high-resolution cross-section in the direction of reef progradation. This cross-section shows vertical shifts of the reefal facies and erosion surfaces linked to a general progradational pattern that defines the accretional units. Four hierarchical orders of magnitude (1-M to 4-M) of accretional units are identified by consideration of the vertical facies shifts and by which erosion surfaces are truncated by other erosion surfaces. All these orders show similar patterns: horizontal beds of lagoonal facies in the upper part (landward), reefal and slope facies with sigmoidal bedding in the central part, and open-platform facies with subhorizontal bedding in the lower part (basinwards). The boundaries are erosion surfaces, horizontal over the lagoon facies, dipping basinwards over the reef-front facies and connecting basinwards with their correlative conformities over the reef-slope and open-platform facies. The four orders of accretional units are interpreted in terms of four (1-M to 4-M) hierarchies of sea-level cycles because (i) there is a close relation between the coral growth and the sea surface, (ii) there are vertical shifts in the reefal facies and their relation to the erosion surfaces, and (iii) there was very little tectonic subsidence in the study area during the late Miocene. Additionally, all these units can be described in terms of their position relative to the sea-level cycle: (i) the reefs prograde on the open-platform sediments during low stands of sea-level; (ii) aggradation of the lagoon, reef and open-platform facies dominates during sea-level rises, and the lagoonal beds onlap landwards upon the previous erosion surface; (iii) reefal progradation occurs during high stands of sea-level; and (iv) the 2-M sea-level fall produces an off-lapping reef and there is progradation with downward shifts of the reefal facies and erosion landward on the emerged (older) reefal units (A-erosion surfaces); the 3-M and 4-M sea-level falls produce only erosion (B-and C-erosion surfaces). Although precise age data do not exist at present, some speculations upon the frequency of these Miocene relative sea-level cycles can be made by comparisons with Pleistocene cyclicity. There is a good correlation between the Miocene 2-M cycles and the 100-ka Pleistocene cycles. Consequently, the 1-M cycles can be assigned to a fourth order in relation to previously proposed global cycles and the 2-M to fifth-order cycles. All these accretional units could be defined as ‘sequences’, according to the definition as commonly used in sequence stratigraphy. However, they represent higher than third-order sea-level cycles, but are not parasequences. The term subsequence, therefore, is suggested to define ‘a part of a sequence bounded by erosion surfaces (mostly subaerial) and their correlative conformities basinwards'. A hierarchy of subsequences can be established.     

Mesozoic to Cenozoic retroarc basin evolution during changes in tectonic regime,southern Central Andes (31–33°S): Insights from zircon U-Pb geochronology

The southern Central Andes of Argentina and Chile (27–40°S) are the product of deformation, arc magmatism, and basin evolution above a long-lived subduction system. With sufficient timing and provenance constraints, Andean stratigraphic and structural records enable delineation of Mesozoic-Cenozoic variations in subsidence and tectonic regime. For the La Ramada Basin in the High Andes at ∼31–33°S, new assessments of provenance and depositional age provided by detrital zircon U-Pb geochronology help resolve deformational patterns and subsidence mechanisms over the past ∼200 Myr. Marine and nonmarine clastic deposits recorded the unroofing of basin margins and sediment contributions from the Andean magmatic arc during Late Triassic to Early Cretaceous extension, thermal subsidence, and possible slab rollback. Subsequent sediment delivery from the Coastal Cordillera corresponded with initial flexural accommodation in the La Ramada Basin during Andean shortening of late Early Cretaceous to Late Cretaceous age. The architecture of the foreland basin was influenced by the distribution of precursor extensional depocenters, suggesting that inherited basin geometries provided important controls on later flexural subsidence and basin evolution. Following latest Cretaceous to early Paleogene tectonic quiescence and a depositional hiatus, newly dated deposits in the western La Ramada Basin provide evidence for a late Paleogene episode of intra-arc and proximal retroarc extension (development of the Abanico Basin, principally in Chile, at ∼28–44°S). Inversion of this late Paleogene extensional basin system during Neogene compression indicates the southern Central Andes were produced by at least two punctuated episodes of shortening and uplift of Late Cretaceous and Neogene age.     

What is Franciscan?: revisited

The Franciscan Complex of California is better understood now than in 1972, when Berkland et al. defined it as a complex and divided it into three geographic belts. A re-evaluation is needed. Belts first served as major architectural units, but they have been abandoned by some and renamed as and subdivided into tectonostratigraphic terranes by others. The Franciscan Complex – considered to be the archetypical accretionary complex by many – is the folded, faulted, and stratally disrupted rock mass comprising the supramantle basement of the California-Southern Oregon Coast Ranges exposed east of the Salinian Block and west of and structurally below principal exposures of the Coast Range Fault, Coast Range Ophiolite, Great Valley Group, and Klamath Mountains. The Complex is dominated by sandstones and mudrocks, but contains mafic oceanic crustal fragments with chert, limestone, and other rock types, and zeolite, prehnite-pumpellyite, blueschist, and rare amphibolite and eclogite facies metamorphic rocks. Review of historical precedence, new data, available large-scale maps, and fundamental definitions suggest now (1) that the Belt terminology as applied to the entire Franciscan Complex conflicts with current knowledge of Franciscan rocks and architecture; and (2) that most named Franciscan terranes and nappes are inconsistent with basic definitions of those unit types. The major architectural units into which the Franciscan Complex can be divided are accretionary units – mélanges and underthrust sheets. Underthrust sheets can be subdivided into smaller units, e.g. broken formations and olistostromal mélanges, mappable using traditional lithostratigraphic and structural mapping techniques. Unresolved controversies in reconstruction of the nature and history of the accretionary complex relate to specific mélange origins; megathrust versus subduction channel mélange models; chert conundrums; delineation of the ages, subdivisions, and regional architecture of Franciscan units; palinspastic reconstruction of the pre-Late Cenozoic architecture; and reconstruction of the complete histories of accretionary units.     

Reefs in the Early Paleozoic Taebaek Group, Korea: A Review

Various early Paleozoic (Cambrian Series 3–Middle Ordovician) reefs are found in the Taebaek Group, eastern Korea, located in the eastern margin of the Sino-Korean Block. They occur in every carbonate-dominant lithostratigraphic unit of the group, but their morphology and composition differ markedly. The Daegi Formation (middle Cambrian: Cambrian Series 3) contains siliceous sponge-Epiphyton reefs formed in a shallow subtidal environment, which is one of the earliest metazoan-bearing microbial reefs after the archaeocyath extinction. The Hwajeol Formation (upper Cambrian: Furongian) encloses sporadic dendrolites consisting of Angulocellularia, which developed in a relatively deep subtidal environment, representing a rare deeper water example. The onset of the Ordovician radiation resulted in the formation of microbialite–Archaeoscyphia–calathiid patch reefs in shallow subtidal deposits of the Lower Ordovician Dumugol Formation. Subsequent late Early Ordovician relative sea-level fall established extensive peritidal environments, forming microbial mats and stromatolites of the Lower–Middle Ordovician Makgol Formation. Ensuing Ordovician radiation resulted in one of the earliest metazoan skeletal reefs of the Middle Ordovician Duwibong Formation, constructed by stromatoporoid Cystostroma and bryozoan Nicholsonella, and developed around shallow shoals. These reefs reflect ongoing evolution and sea-level change during the early Paleozoic, and exemplify a rare glimpse of peri-Gondwanan records of reef evolution, which warrant detailed investigations and comparison with their counterparts in other regions.     

The intrinsic effect of shape on the retrogradation motif and timing of drowning of carbonate patch reef systems (Lower Frasnian,Bugle Gap,Canning Basin,Western Australia)

The evolution and architecture of a set of retreating Lower Frasnian patch reef outcrops in the Canning Basin of Western Australia were evaluated, and their depositional and stratigraphic contacts spatially recorded using digital surveying tools. The geological data, together with high‐resolution digital elevation models, were assembled in three‐dimensional visualization and modelling software and subsequently used for building two‐dimensional surface models and three‐dimensional volumetric models. Numerical data on geometry and shape were extracted from these models and used to quantitatively assess the retrogradation motif of patch reef development. The development of the patch reefs comprises three stages. During stages 1 and 2, the patch reefs exhibited an overall retrogradational escarpment‐type configuration displayed by, on average, 60° steep reef‐margin walls that lacked the support of coeval slope deposits. The subdivision between stages 1 and 2 is based on minor backstepping reducing less than 10% of the platform‐top area. The onset of stage 3 is recognized by stromatolite development fringing reef‐margin walls. During stage 3 an aggrading accretionary reef‐margin developed, comprising allochthonous and autochthonous slope deposits. Both types of slope deposit onlap the previous stages and are distributed unevenly with allochthonous slope deposits being noticeably absent around the smaller and more elongate patch reefs. The variation in distribution of slope sediment type can be explained by the amount, linked to platform size, of platform‐top shedding. Small patch reefs were unable to fill the available accommodation adjacent to escarpments with allochthonous slope sediments and were thus encroached by autochthonous slope sediments. The variation, which cannot be explained by the size difference in the platform‐top factory, has been related to the difference in perimeter length. For patch reefs with similar platform‐top production areas, a more elongate patch reef inherits a longer perimeter and a proportionally smaller volume of allochthonous slope sediment per margin length will be transported to the flanks. Thus, the more elongate patch reef intrinsically contained more sites within which autochthonous slope sediments developed. Digital outcrop modelling and numerical evaluation of the evolution of the patch reefs revealed the major differences in retrogradation motif. The quantified variations in progressive decline of platform‐top area with height were confirmed by hypothetical decline curves for ellipse‐shaped carbonate systems for which aspect ratio (ratio between length and width) varied. This mathematical model demonstrates that the progressive decline of the production area is highly sensitive to shape and can be used to numerically assess and predict the relative timing of drowning, i.e. when the platform‐top production area becomes nil, of retrogradational isolated carbonate platforms that are controlled by high accommodation. Wider implications can be surmised for highstand systems tracts and prograding carbonate systems. For example, for equally sized platforms with hypothetically similar carbonate factories and identical external forces, the potential to prograde by platform‐top shedding is higher with a smaller aspect ratio because the shorter perimeter implies less accommodation space needing to be filled up to commence slope progradation. Clearly, there are intrinsic effects of shape on the development of carbonate platform systems.     

Fault slip analysis in the Koralm Massif (Eastern Alps) and consequences for the final uplift of “cold spots” in Miocene times

The Paleogene and Neogene evolution of Austroalpine basement units east of the Tauern Window is characterised by the formation of two major sets of faults: (1) ESE–WNW- to E–W-trending faults, associated with ENE- and NNW-trending conjugate structures and (2) N–S to NNE-SSW striking structures, mainly acting as high-angle normal faults, often associated with E-dipping low-angle normal faults along the western margin of the Styrian Basin.Together with the stratigraphic evolution of the Styrian and Lavanttal Basins and the related subsidence histories a tectonic evolution may be reconstructed for this part of the Eastern Alps. In the southern part of the Koralm Massif, WNW-trending fractures were activated as dextral strike-slip faults, associated with the evolution of WNW-trending troughs filled up with coarse block debris. W- to WNW-trending fractures were reactivated as normal faults, indicating N–S extension. It is assumed that these phases resulted in subsidence and block debris sedimentation in Karpatian and Badenian times (ca. 17–13 Ma).In the Western Styrian Basin no Sarmatian (13–11.5 Ma) sediments are observed; Pannonian (11.5 to 7.1 Ma) sediments are restricted to the Eastern Styrian Basin. This indicates, that the Koralm basement and the Western Styrian Basin were affected by post-Sarmatian uplift, coinciding with a re-activation of N-trending normal faults along the eastern margin of the Koralm Massif. Therefore, we suggest that the final uplift of the Koralm Complex, partly together with the Western Styrian Basin, occurred during the early Pannonian (at approximately 10 Ma). The elevation of clastic deposits indicates that the Koralm Complex was elevated by approximately 800 m during this phase, associated with an additional phase of E–W-directed extension accommodated by N–S striking normal faults.     

Windblown desert sands in coeval shallow marine deposits: a key for the recognition of coastal ergs in the mid‐Cretaceous Iberian Basin,Spain

Grain size and SEM analyses suggest the presence of Cretaceous windblown desert sands in coeval shallow marine environments. Size distributions and microtexture data allowed us to infer a climate change to more arid conditions in the Iberian Basin during the mid‐Cretaceous. The grain size of the sands in the late Aptian to early Cenomanian shallow‐marine deposits in the western sub‐basins of the Maestrazgo Basin (Teruel, Spain) is almost exclusively in the range between 1.5 and 3 Φ (0.35–0.125 mm), reflecting a prolonged or at least recurrent preselection of aeolian sands. The palaeolatitude of 25°N showed a change from a warm humid climate during the Lower Cretaceous to an arid desert climate in the eastern sector of Iberia during the late Aptian–early Cenomanian. Winds supplied abundant desert sand to the estuarine and deltaic sedimentary environments where it was worked up in sandy sub‐ and intertidal facies with a striking absence of mud in cross‐bedded sets which otherwise clearly reflect the influence of a semi‐diurnal tidal system.     

Oxfordian (Upper Jurassic) coral reefs in Western Europe: reef types and conceptual depositional model

Comparative sedimentology and palaeoecology of Oxfordian (Upper Jurassic) coral-dominated reefs of England, France, Italy and Switzerland has been used to: (1) identify and characterize different types of Late Jurassic coral reefs with regard to their litho- and biofacies; and (2) develop a depositional model for these reefs relating different reef types to each other within a palaeoenvironmental framework. Eight generic reef types and one associated reef facies are recognized. These are: (I) biostromal units dominated by platy microsolenids developed within clean limestone facies; (II) biostromal units dominated by platy microsolenids developed within marly facies; (III) reefal thickets dominated by tall dense phaceloid colonies developed within pure carbonate muds; (IV) microbial-coral reefs dominated by massive, branching ramose and phaceloid colonies; (V) large high diversity reefal units associated with large volumes of bioclastic material; (VI) small species-poor reefs developed within mixed carbonate/siliciclastic facies; (VII) microbial-coral reefs dominated by massive colonies; (VIII) reefal thickets dominated by branching ramose colonies with widely spaced branches developed amongst sand shoals and coral debris channels; and (IX) conglomerates rich in rounded coral fragments (the reef associated facies). The development of these different constructional and compositional reef types is interpreted as being primarily a function of light intensity, hydrodynamic energy levels and sediment balance. A conceptual depositional model based on these parameters can be used to predict the spatial and temporal distribution of different reefal carbonates and highlight sedimentological and palaeoecological trends in reef development.     

Stratigraphy and allogenic controls of the western Portugal Cretaceous: an updated synthesis

The stratigraphy of the western Portugal on-shore Cretaceous record (western Iberian margin, Lusitanian Basin) is described, including formal units and a selection of informal units prevailing in the geological literature. This paper is a synthesis based on a review of previous works, but with an innovative emphasis on the interpretation of eustatic and tectonic controls. The sedimentary record is dominated by siliciclastics and comprises fluvial and deltaic coastal marine siliciclastic systems, as well as extensive deposits of shallow marine carbonate platforms, both open and rimmed. Several regional unconformities and transgressive/regressive cycles are identified and the allogenic controls interpreted, namely the geodynamic events along the boundaries of the Iberian plate. Above the Berriasian deposits belonging to the Upper Jurassic cycle, the five main unconformity-bounded units are: (1) upper Berriasian–lower Barremian, (2) upper Barremian–lower Aptian, (3) upper Aptian–uppermost Cenomanian, (4) mid lower Turonian–lower Campanian and (5) middle Campanian–Maastrichtian. These units show transgressive peaks in the lower Hauterivian, lower Aptian, base of the upper Cenomanian and mid lower Turonian. The general trend of the Lower Cretaceous reflects the transition from late rifting to passive margin, with the last break-up unconformity dated as late Aptian. The Lusitanian Basin achieved full infill by the Cenomanian, when a large carbonate platform extended far inland. The later deposits were preserved only in the northern sector and the accompanying unconformities reflect transpressive intraplate stresses generated in boundaries of the plate with Africa and Eurasia. With very low accommodation being created throughout the Late Cretaceous, fluvial deposits were dominant, including a few marine levels related with eustatic rises in the early Turonian, the Coniacian, the early Campanian and the Maastrichtian.     

Lateglacial and Holocene palaeohydrology in the western Mediterranean region: The Lake Estanya record (NE Spain)

The multi-proxy analysis of sediment cores recovered in karstic Lake Estanya (42°02′ N, 0°32′ E; 670 m a. s. l., NE Spain), located in the transitional area between the humid Pyrenees and the semi-arid Central Ebro Basin, provides the first high-resolution, continuous sedimentary record in the region, extending back the last 21 000 years. The integration of sedimentary facies, elemental and isotopical geochemistry and biogenic silica, together with a robust age model based on 17 AMS radiocarbon dates, enables precise reconstruction of the main hydrological and environmental changes in the region during the last deglaciation.Arid conditions, represented by shallow lake levels, predominantly saline waters and reduced organic productivity occurred throughout the last glacial maximum (21–18 cal kyrs BP) and the lateglacial, reaching their maximum intensity during the period 18–14.5 cal kyrs BP (including Heinrich event 1) and the Younger Dryas (12.9–11.6 cal kyrs BP). Less saline conditions characterized the 14.5–12.6 cal kyrs BP period, suggesting higher effective moisture during the Bölling/Allerød. The onset of more humid conditions started at 9.4 cal kyrs, indicating a delayed hydrological response to the onset of the Holocene which is also documented in several sites of the Mediterranean Basin. Higher, although fluctuating, Holocene lake levels were punctuated by a mid Holocene arid period between 4.8 and 4.0 cal kyrs BP. A major lake-level rise occurred at 1.2 cal kyrs BP, conducive to the establishment of conditions similar to the present and interrupted by a last major water level drop, occurring around 800 cal yrs BP, which coincides with the Medieval Climate Anomaly.The main hydrological stages in Lake Estanya are in phase with most Western Mediterranean and North Atlantic continental and marine records, but our results also show similarities with other Iberian and northern African reconstructions, emphasizing peculiarities of palaeohydrological evolution of the Iberian Peninsula during the last deglaciation.