条形埋置基础固结分析计算图表

基于比奥固结理论,用有限元方法研究了有限饱和土层中条形埋置基础的固结沉降特性。仔细分析了影响固结度的3个参数：基础埋深与土层厚度的比值;土层厚度与基础宽度的比值;土骨架的泊松比。根据分析结果,提出了归一化无量纲时间,并给出了计算条形埋置基础固结度的计算图表。这些图表为基础设计提供了便捷准确的计算方法。运用文中图表计算固结度的最大误差不超过3 %。     

非均质地基承载力及破坏模式的FLAC数值分析

利用基于Lagrangian显式差分的FLAC算法，通过数值计算，对黏结力随深度线性增长的非均质地基上条形基础和圆形基础的极限承载力及地基破坏模式进行了对比计算与系统分析。研究表明：（1）随着地基黏结力沿深度非均匀变化系数的增大，地基的破坏范围逐渐集中在地基表层和基础两侧：（2）即使地基的非均质程度较小，当将非均质地基近似地按均质地基考虑时，由此所估算的承载力可能过于保守；（3）地基承载力系数随黏结力沿深度非均匀变化系数的增大而非线性地增大。与数值解相比，skempton与Peck等近似公式均可能高估了非均质地基承载力。     

Probabilistic analysis of strip footings based on enhanced Kriging metamodeling

Two advanced Kriging metamodeling techniques were used to compute the failure probability of geotechnical structures involving spatially varying soil properties. These methods are based on a Kriging metamodel combined with a global sensitivity analysis that is called in literature Global Sensitivity Analysis-enhanced Surrogate (GSAS) modeling for reliability analysis. The GSAS methodology may be used in combination with either the Monte Carlo simulation (MCS) or importance sampling (IS) method. The resulting Kriging metamodeling techniques are called GSAS-MCS or GSAS-IS. The objective of these techniques is to reduce the number of calls of the mechanical model as compared with the classical Kriging-based metamodeling techniques (called AK-MCS and AK-IS) combining Kriging with MCS or IS. The soil uncertain parameters were assumed as non-Gaussian random fields. EOLE methodology was used to discretize these random fields. The mechanical models were based on numerical simulations. Some probabilistic numerical results are presented and discussed.     

Bearing capacity of ring footings on cohesionless soil under eccentric load

This paper presents a study on the bearing capacity of eccentrically-loaded rough ring footings resting over cohesionless soil. To this aim, a series of 3D numerical simulations were performed using the finite difference method. In order to consider the effect of load eccentricity, reduction factor method is applied. In this method, the ratio of an eccentrically-loaded bearing capacity to the bearing capacity of the same footing under vertical load is defined. Comparison between the results of the numerical simulations with those of analytical solutions and experimental data indicates good agreement. A mathematical expression is also introduced for eccentrically-loaded ring footings.     

Reliability bearing capacity analysis of footings on cohesive soil slopes using RFEM

Reliability analysis of bearing capacity of a strip footing at the crest of a simple slope with cohesive soil was carried out using the random finite element method (RFEM). Analyses showed that the coefficient of variation and the spatial correlation length of soil cohesion can have a large influence on footing bearing capacity, particularly for slopes with large height to footing width ratios. The paper demonstrates cases where a footing satisfies a deterministic design factor of safety of 3 but the probability of design failure is unacceptably high. Isotropic and anisotropic spatial variability of the soil strength was also considered.     

Failure envelopes and plastic potentials for eccentrically loaded surface footings on undrained soil

The failure envelope in V–M space for surface foundations on undrained material under eccentric loading can be determined using an extended version of the scaling (or effective area) concept of Meyerhof. A similar displacement transformation allows production of the plastic potential. The two‐dimensional finite element analyses of fully attached foundations subject to combined vertical (V) and moment (M) loading have been used to calculate appropriate scaling points for deduction of the failure envelope and plastic potential. Failure envelopes and plastic potentials are presented for footings on uniform and non‐uniform undrained material and it is seen that the equivalent ‘critical state’ or ‘parallel point’ lies slightly beneath the peak moment capacity. For accurate prediction of failure envelopes for footings on non‐uniform strength soil, consideration must be made of the apparent reduction of the soil heterogeneity as the area of footing in contact with the soil decreases. Copyright © 2001 John Wiley & Sons, Ltd.     

Ultimate bearing capacity of equally spaced multiple strip footings on cohesionless soils without surcharge

The ultimate bearing capacity of a group of equally spaced multiple rough strip footings was determined due to the contribution of soil unit weight. The analysis was performed by using an upper bound theorem of limit analysis in combination with finite elements and linear programming. Along the interfaces of all the triangular elements, velocity discontinuities were considered. The value of ξ_γ was found to increase continuously with a decrease in S/B, where (i) ξ_γ is the ratio of the failure load of an interfering strip footing of a given width (B) to that of a single isolated strip footing having the same width and (ii) S is the clear spacing between any two adjacent footings. The effect of the variation of spacing on ξ_γ was found to be very extensive for small values of S/B; ξ_γ approaches infinity at S/B=0. In all the cases, the velocity discontinuities were found to exist generally in a zone only around the footing edge. Copyright © 2008 John Wiley & Sons, Ltd.     

Numerical and analytical observations on long and infinite slopes

Interest in the mechanics of landslides has led to renewed evaluation of the infinite slope equations, and the need for a more general framework for estimating the factor of safety of long and infinite slopes involving non‐homogeneous soil profiles. The paper describes finite element methods that demonstrate the potential for predicting failure in long slope profiles where the critical mechanism is not necessarily at the base of the soil layer. The influence of slope angle is also examined in long slopes, leading to some counter‐intuitive conclusions about the impact of slope steepness on the factor of safety. Copyright © 2010 John Wiley & Sons, Ltd.     

各向异性和非均质黏土粗糙地基承载力上限计算

通过构建一种网格状多刚性块破坏机制,利用上限法研究了黏土地基各向异性和非均质对粗糙条形基础地基承载力的影响。该破坏机制允许滑动面和速度矢量沿破坏区域过渡区的径向和切向发生变化,形成了更为精确的破坏机制和塑性流动速度场。根据上限定理得到各向异性和非均质性黏土上条形基础极限承载力的目标函数,将其转化为非线性规划问题,并通过编程对该计算模型进行求解。与已有研究成果对比分析表明,两者具有较好一致性,且优于现有同类方法。文中亦探讨了黏土地基非均质、各向异性以及其他相关参数对地基承载力的影响。     

Limit state analysis of earthen slopes using dual continuum/FEM approaches

A framework alternative to that of classical slope stability analysis is developed, wherein the soil mass is treated as a continuum and in-situ soil stresses and strengths are computed accurately using inelastic finite element methods with general constitutive models. Within this framework, two alternative methods of stability analysis are presented. In the first, the strength characteristics of the soil mass are held constant, and the gravitational loading on the slope system is increased until failure is initiated by well-defined mechanisms. In the second approach, the gravity loading on the slope system is held constant, while the strength parameters of the soil mass are gradually decreased until well-defined failure mechanisms develop. Details on applying both of the proposed methods, and comparisons of their characteristics on a number of solved example problems are presented. Copyright © 1999 John Wiley & Sons, Ltd.     

The influence of load inclination on the undrained bearing capacity of strip footings on slopes

The effect of inclined loading on the bearing capacity of foundations on horizontal ground surface is well established and both the exact solution and simpler empirical equations are available for the calculation of the failure loads. However, for footings on or near slopes complete solutions are available only for vertical loading. This paper investigates the influence of inclined loading on the horizontal and vertical failure loads. The finite element, upper bound plasticity and stress field methods are used to examine a wide range of geometries and soil properties. The methods are first validated against known solutions for two special cases and are subsequently employed to investigate the effect of the geometrical and material properties on the failure loads and the bearing capacity load interaction diagram. Based on this investigation an empirical equation is proposed for the load interaction diagram for undrained inclined loading of footings on or near slopes.     

基于离散元法的节理岩体边坡稳定性分析

节理岩体边坡的稳定性在很大程度上取决于节理的强度及其分布形式。由于节理岩体边坡的失稳破坏具有大变形和非连续的特点,因此,离散单元法成为研究节理岩体边坡破坏机制的最有效方法之一。通过采用离散元软件PFC2D进行数值模拟,对完整岩石及节理的力学性能进行研究,并建立含密集节理的岩体边坡模型,讨论了节理连通率对边坡破坏形式的影响。结果表明,节理岩体边坡的失稳破坏是一个渐进的过程;在多组节理密集分布的岩体边坡中,连通率越大,其稳定性越差;随着连通率的减小,边坡的破坏形式由大范围的滑坡转变为局部崩塌的形式     

复合加载情况下非均质地基上条形基础的极限承载力研究

复合加载情况下精确求解非均质地基上条形基础的极限承载力以及评价影响极限承载力的相关因素,具有很强的工程实用与理论参考价值。基于极限平衡原理,在Mohr-Coulomb破坏准则的基础上,将非均质地基上条形基础极限承载力问题等价为一个边界待定的泛函极值问题。利用变分原理得到与平衡方程相等价的积分约束条件以及相应的欧拉方程与横截条件。引入问题边界条件,利用VC++6.0编制了数值计算程序,求得了复合加载情况下非均质地基破坏时的滑裂面函数与破坏包络曲线。从理论上研究了土体内摩擦角、土体黏聚力、土层强度比与地下水位变化等因素对地基破坏包络曲线的影响。研究结果表明,其解答是地基极限承载力真实解的某一最小上限。     

Two- and three-dimensional bearing-capacity solutions for footings on two-layered clays

In this paper, finite element analysis is used to predict the undrained bearing capacity of strip, square and circular footings resting on layered clays. The soil profile consists of two clay layers with different thicknesses and properties. The results are compared with previous solutions for strip footings on layered clays. The bearing-capacity behaviour is discussed and the bearing-capacity factors are given for various cases involving a range of layer thicknesses and properties of the two clay soil layers.     

临近边坡的条形基础地基极限承载力数值分析

建筑物或构筑物基础临近边坡置放的情况在实际工程中十分普遍,但目前对于临近边坡基础的地基承载力及破坏模式尚缺乏深入研究。采用不连续布局优化（DLO）极限分析法建立数值模型,分析边坡几何尺寸、土体参数和基础位置对临坡条形基础的极限承载力和边坡破坏模式的影响,并对国内外现行规范推荐的计算方法进行评价。结果表明：极限承载力随边坡高度和边坡倾斜角的增大而减小,当坡高超过临界高度后,极限承载力将不受其影响;极限承载力随土体黏聚力和内摩擦角的增大而提高,滑动面随黏聚力的增大而变浅,随内摩擦角的增大而变深;极限承载力随基础与坡肩相对距离的增大而提高,当基础置放位置超过某临界距离后极限承载力不受边坡影响。在土体强度高、坡角较大时,《建筑地基基础设计规范》规定的临坡基础最小置放距离偏于危险,设计时仍需考虑边坡对承载力的减损作用;在土体强度较低、坡角较小时,规范规定值偏于保守。美国AASHTO规范对边坡地基极限承载力的取值在砂土边坡时较为可靠,但其仅适用于坡面破坏模式的情况;饱和黏土边坡的承载力曲线有悖于理论解,对临界距离的规定同样存在低估。     

非饱和土边坡稳定分析方法探讨

在对非饱和土边坡进行稳定分析时,应该全面地考虑基质吸力对边坡稳定的贡献。首先,分别探讨了基于Fredlund非饱和土强度表达式和Bishop非饱和土有效应力强度公式将强度折减有限元法推广到非饱和土边坡稳定分析中的具体方法;然后,开发了可以考虑基质吸力两种处理方法的强度折减有限元计算程序;最后,给出了一个非饱和土边坡稳定分析的对比算例,说明了二者的不同特点。     

Importance of footing–soil separation on dynamic stiffness of piled embedded footings

Different phenomena such as soil consolidation, erosion, and scour beneath an embedded footing supported on piles may lead to loss of contact between soil and the pile cap underside. The importance of this separation on the dynamic stiffness and damping of the foundation is assessed in this work. To this end, a numerical parametric analysis in the frequency domain is performed using a rigorous three‐dimensional elastodynamic boundary element–finite element coupling scheme. Dimensionless plots relating dynamic stiffness functions computed with and without separation effects are presented for different pile–soil configurations. Vertical, horizontal and rocking modes of oscillation are analyzed for a wide range of dimensionless frequencies. It is shown that the importance of separation is negligible for frequencies below those for which dynamic pile group effects start to become apparent. Redistribution of stiffness contributions between piles and footing is also addressed. Copyright © 2009 John Wiley & Sons, Ltd.     

简单边坡的稳定性分析

提出了一种新方法用于分析边坡的稳定性,对土条间作用力作了如下假定：认为土条侧面作用力平行于条底,但其大小并不相等。依据平衡条件,结合强度破坏准则,求出边坡的安全系数。算例表明,该方法不失为一种合理、有效的边坡稳定分析方法。     

考虑张剪破坏的边坡下限原理有限元法

在工程中发生的很多边坡破坏模式不仅表现为剪切破坏,还表现为在边坡后缘产生一定深度的张拉破坏。这种既考虑剪切破坏又考虑张拉破坏的屈服准则,是经典的Mohr-Coulomb（简称M-C）屈服准则难以模拟的。从空间方位离散的角度出发,对经典的M-C屈服面线性化的方式进行改造,建立了基于方位离散的线性化屈服准则,同时在屈服准则中考虑了张拉破坏准则,并引入伪黏聚力,保证在每一个离散方位平面上既不违背屈服准则,又不违背张拉破坏准则,建立了同时考虑张拉及剪切破坏的下限原理有限元法。算例表明了该方法的有效性,同时也证明了仅考虑剪切破坏时,会过高地估计边坡的安全系数。     

交变载荷作用下边坡的安定性分析

边坡稳定的极限分析方法只适用于比例加载的情况。当其上所受到的全部或部分载荷发生往复变化时,应该采用安定分析来评价边坡的安全性。通常边坡除了受到恒定的重力作用以外,地下水的作用也是一个不能忽视的因素。而由于降雨等原因,地下水位往往会在一定范围内往复变化,使得在稳定的地下水位以上的部分岩土体经常处于干湿循环的状态。根据率形式的Koiter机动安定定理,提出了考虑地下水位往复变化情况的边坡安定上限分析方法。利用抗剪强度参数折减定义的安全系数,定量地计算载荷变化对边坡稳定性的影响。最后通过一个直立边坡的简单算例证明了提出的分析方法的有效性。