Crystallization and welding variations in a widespread ignimbrite sheet; the Rattlesnake Tuff,eastern Oregon,USA

The 7.05 Ma Rattlesnake Tuff covers ca. 9000 km², but the reconstructed original coverage was between 30000 and 40000 km². Thicknesses are remarkably uniform, ranging between 15 and 30 m for the most complete sections. Only 13% of the area is covered with tuff thicker than 30 m, to a maximum of 70 m. The present day estimated tuff volume is 130 km³ and the reconstructed magma volume of the outflow is 280 km³ DRE (dense rock equivalent). The source area of the tuff is inferred to be in the western Harney Basin, near the center of the tuff distribution, based mainly on a radial exponential decrease in average pumice size, and is consistent with a general radial decrease in welding and degree of post-emplacement crystallization. Rheomorphic tuff is found to a radius of 40–60 km from the inferred source.Four facies of welding and four of post-emplacement crystallization are distinguishable. They are: non-welded, incipiently welded, partially welded and densely welded zones; and vapor phase, pervasively devitrified, spherulite and lithophysae zones. The vapor phase, pervasively devitrified and lithophysae zones are divided into macroscopically distinguishable subzones. At constant thickness (20±3 m), and over a distance of 1–3 km, nonrheomorphic sections can cary between two extremes: (a) entirely vitric sections grading from nonwelded to incipiently welded; and (b) highly zoned sections. Highly zoned sections have a basal non- to densely welded vitric tuff overlain by a spherulite zone that grades upward through a lithophysae-dominated zone to a zone of pervasive devitrification, which, in turn, is overlain by a zone of vapor-phase crystallization and is capped by partially welded vitric tuff. A three-dimensional welding and crystallization model has been developed based on integrating local and regional variations of 85 measured sections.Strong local variations are interpreted to be the result of threshold-governed welding and crystallization controlled by residence time above a critical temperature, which is achieved through differences in thickness and accumulation rate.     

Threshold for initiation of motion of unimodal and bimodal sediments

Experimental data,obtained from previous studies,on Critical Tractive Stress(CTS) of non-uniform sediments, have been used to verify the adequacy of existing relationships for CTS of non-uniform bimodal sediments.Keeping in view the performance of such relationships,a new relationship for computation of dimensionless CTS of individual size fraction of non-uniform unimodal and bimodal sediments has been proposed in the form of power law.The coefficient and exponent of the proposed power law have been empirically correlated with sediment characteristics for available sediment data.The proposed relationship has been validated with independent flume and field data to assess their applicability for unimodal and bimodal sediments.     

Origin and development of tafoni in Tunnel Spring Tuff,Crystal Peak,Utah, USA

Bedding‐parallel tafoni are well developed over much of the surface of the Tunnel Spring Tuff (Oligocene) exposed in 300‐m‐high Crystal Peak, an inselberg. The Tunnel Spring Tuff is a crudely stratified, non‐welded rhyolite ash‐flow tuff with > 30 per cent porosity. Clasts of Palaeozoic dolomite, limestone and quartzite make up 10 per cent of the tuff. The tafoni are remarkable because of their size (up to 20 m wide but rarely wider than 4 m), shape of the openings (spherical, arch‐like or crescent‐shaped) and abundance (up to 50 per cent of an outcrop face). They are actively forming today. Calcite is abundant (10 to 40 per cent by weight) in tafoni as an efflorescence in spalling flakes of tuff on their roofs and walls. Halite and gypsum generally make up less than 0·01 per cent of the efflorescence. The absence of corroded quartz and feldspar grains in spall fragments indicates that chemical weathering is unimportant in development of the tafoni. Calcite, aragonite, halite and gypsum dust from modern salt pans less than 20 km from Crystal Peak are potential sources of salt in the tuff, but the prevailing winds are in the wrong direction for significant amounts of these evaporite minerals to reach the inselberg. Calcite is the only evaporite mineral present in the tafoni in more than trace amounts, and this mineral is readily available within the tuff itself as a result of rock weathering. We propose that meteoric water containing carbonic acid infiltrates the tuff, dissolves carbonate clasts, and migrates to the steep flanks (>20°) of the peak through abundant megapores and micropores. There it evaporates and precipitates calcite. Crystallization pressure spalls off grains and sheets as the physical manifestation of salt weathering. The quasi‐uniform spacing of tafoni suggests that a self‐organization process is active in the water flow. Copyright © 2000 John Wiley & Sons, Ltd.     

Theoretical models and experimental determination methods for equations of state of silicate melts: A review

Silicate melts are very active in the interior of the Earth and other terrestrial planets, and are important carriers for the transport of material and energy. The determination of the equation of state(EOS) for silicate melts and the acquisition of a precise quantitative relationship between molar volume(or density) and temperature, pressure, and composition is essential for simulating the generation, migration, and eruption processes of magmas and the evolution of the magma ocean stage during the early formation of the Earth and other terrestrial planets, for calculating and modeling the phase equilibria involving silicate melts, and for revealing the variation of the microstructure of silicate melts with pressure. However, it is experimentally challenging to determine the volumetric properties of silicate melts and the accumulated density data at high pressure are still very limited due to a series of problems such as: the high liquidus temperature of silicate rocks; proneness for silicate melts to react with sample capsules to change the melt composition; and proneness for melts to flow and leak during the high pressure and high temperature experiments. In recent years, there is rapid progress in the high pressure and high temperature experimental techniques, in terms of not only the extension of temperature and pressure ranges but also the improvement on the accuracy of measurements, and the emergence of new methods for in-situ measurements. Here, we review the widely-used theoretical models of ambient-pressure and high-pressure EOS for silicate melts, and illustrate some problems that need to be solved urgently:(1) the room pressure EOS for iron-and titanium-bearing silicate melts needs to be improved;(2) the partial molar properties of the H2 O and CO2 components in silicate melts containing volatile components may vary markedly with the melt composition, which need to be addressed in high-pressure EOS;(3) how the formulation and applicable range of EOS correspond to changes in melt structure and compression mechanism requires further study. We highlight the basic principle and applicable range of various methods for determining the EOS for silicate melts, and compare the advantages and disadvantages of doublebob Archimedes method, fusion curve analysis, shock compression experiments, sink-float method, X-ray absorption, X-ray diffraction and ultrasonic interferometry. Future trends in this field are to develop experimental techniques for in situ measurements on melt density or sound velocity at high temperature and high pressure and to accumulate more experimental data,and on the other hand, to improve the theoretical models of the EOS for silicate melts by a combination of research on the microstructure and compression mechanisms of silicate melts.     

Magma mingling in the ∼50 ka Rotoiti eruption from Okataina Volcanic Centre: implications for geochemical diversity and chronology of large volume rhyolites

Examination of glass and crystal chemistry in the Rotoiti Pyroclastics (>100 km³ of magma) demonstrates that compositional diversity was produced by mingling of the main rhyolite magma body with small volumes of other magmas that had been crystallizing in separate stagnant magma chambers. Most (>90%) of the Rotoiti deposits were derived from a low-K₂O, cummingtonite-bearing, rhyolitic magma (T1) discharged throughout the eruption sequence. T1 magma is homogeneous in composition (melt SiO₂=77.80±0.28 wt.%), temperature (766±13 °C) and oxygen fugacity (NNO+0.92±0.09). Most T1 phenocrysts formed in a shallow (∼200 MPa), near water-saturated (a_water=0.8) storage chamber shortly before eruption. Basaltic scoria erupted immediately before the rhyolites, and glass-bearing microdiorite inclusions within the rhyolite deposits, suggest that basalt emplaced on the floor of the chamber drove vigorous convection to produce the well-mixed T1 magma. Lithic lag breccias contain melt-bearing biotite granitoid inclusions that are compositionally distinct from T1 magma. The breccias which overlie the voluminous T1 pyroclastic flow deposits resulted from collapse of the syn-Rotoiti caldera. Post-collapse Rotoiti pumices contain T1 magma mingled with another magma (T2) that is characterized by high-K glass and biotite, and was cooler and less oxidised (712±16 °C; NNO−0.16±0.16). The mingled clasts contain bimodal disequilibrium populations of all crystal phases. The granitoid inclusions and the T2 magma are interpreted as derived from high-K magma bodies of varying ages and states of crystallization, which were adjacent to but not part of the large T1 magma body. We demonstrate that these high-K magmas contaminated the erupting T1 magma on a single pumice clast scale. This contamination could explain the reported wide range of zircon U–Th ages in Rotoiti pumices, rather than slow crystallization of a single large magma body.     

The frictional behavior of lizardite and antigorite serpentinites: Experiments,constitutive models,and implications for natural faults

Laboratory studies of the frictional behavior of rocks can provide important information about the strength and sliding stability of natural faults. We have conducted friction experiments on antigorite and lizardite serpentinites, rocks common to both continental and oceanic crustal faults. We conducted both velocity-step tests and timed-hold tests on bare surfaces and gouge layers of serpentinite at room temperature. We find that the coefficient of friction of lizardite serpentinite is quite low (0.15–0.35) and could explain the apparent low stresses observed on crustal transform faults, while that of antigorite serpentinite is comparable to other crustal rocks (0.50–0.85). The frictional behavior of both types of serpentinite is well described by a two-mechanism model combining state-variable-dominated behavior at high slip velocities and flow-dominated behavior at low velocities. The two-mechanism model is supported by data from velocity-step tests and timed-hold tests. The low velocity behavior of serpentinite is strongly rate strengthening and should result in stable fault creep on natural faults containing either antigorite or lizardite serpentinite.     

Zircon SHRIMP U-Pb age and geological implications of tuff at the bottom of Chang-7 Member of Yanchang Formation in the Ordos Basin

A table tuff interlayer at the bottom of Chang-7 Member of Yanchang Formation,the Ordos Basin,may serve as an indicator for stratigraphic division and correlation.In this study,zircon SHRIMP U-Pb dating was performed on the tuff at the bottom of Chang-7 Member using samples from wells Luo-36 and Zhuang-211 in the southwest of the basin,which yielded weighted average 206Pb/238U ages of 241.3±2.4 and 239.7±1.7 Ma,respectively.The cathodoluminescence images and the U/Th element ratio of tuff indicate that the zircons are magmatogenic and their ages represent that of the sedimentation age of the tuff at the bottom of Chang-7,which is 239.7–241.3 Ma in age.This finding confirms presence of the Middle Triassic strata at the bottom of Yanchang Formation.Taking previous findings into account,we suggest restricing the Late Triassic Yanchang Formation sensu stricto to the interval from Chang-7 to Chang-1 and assigning the interval from Chang-10 to Chang-8 as the Tongchuan Formation.The tuff at the bottom of the Chang-7 Member of Yanchang Formation represents the sedimentary response to the Qinling orogenic event in the early Indosinian.This tectonic event resulted in major changes in paleogeomorphology and the sedimentary environment of the lake basin during deposition of the Yanchang Formation.During this period,extremely favourable conditions were present for subsequent hydrocarbon generation and pooling of lake basin.     

地震波形的分形判别与特征提取

研究地震波的复杂性和它的自相似性以及计算地震道时间序列分数维等一系列特征问题,能得出地震波在复杂构造及断点位置的一系列特征,能轻易地实现地震道异常点的计算机自动拾取。对更深入地研究地震波和更准确地解释地震资料,会有很大的帮助。本文提出了计算地震道分数维的一般方法。实验表明地震道时间序列的分数维在异常点会具有不同的数值,其变化点能够定量指示出异常的准确位置。这对更精确的研究时间剖面上断点及不同地质构造变化有着非常重要的意义。     

Comparison of rhyolites from continental rift,continental arc and oceanic island arc: Implication for the mechanism of silicic magma generation

We discuss the chemical compositions of rhyolites from three distinct tectonic settings: (i) the continental rift from Ethiopia (both Oligocene–Miocene and Quaternary rhyolites); (ii) the early Miocene continental arc of Japan (the Mt Wasso rhyolites related to the rifting of the Japan Sea); and (iii) the oceanic Izu–Bonin Island Arc. The comparison reveals that the oceanic island arc rhyolites have high contents of CaO, Al₂O₃, and Sr, and extremely low abundance of trace elements including K₂O. In contrast, the Ethiopian continental rift rhyolites are characterized by low contents of CaO, Al₂O₃, and Sr, and high contents of K₂O, and are enriched in the whole range of trace elements. The continental arc Mt Wasso rhyolites are apparently low in Nb content, although they display similar chemical trends to those of the Ethiopian rhyolites. This obvious difference in the chemical signatures of the rhyolites from the three tectonic settings is the consequence of their derivation from different sources. The implication of this result is that fractional crystallization processes were dominant in the rift‐related rhyolites both from continental rift and continental arc regardless of the prevailing tectonic setting and the nature of the crust (age, thickness, composition), whereas the oceanic island arc rhyolites may form through partial melting of young, mafic crust.     

Bimodal volcanism at the Katla subglacial caldera,Iceland: insight into the geochemistry and petrogenesis of rhyolitic magmas

The Katla subglacial caldera is one of the most active and hazardous volcanic centres in Iceland as revealed by its historical volcanic activity and recent seismic unrest and magma accumulation. A petrologic and geochemical study was carried out on a suite of mid-Pleistocene to Recent lavas and pyroclastic rocks originated from the caldera. The whole series is characterised by a bimodal composition, including Fe-Ti transitional alkali basalts and mildly alkalic rhyolites. Variations in trace-element composition amongst the basalts and rhyolites show that their chemical differentiation was mainly controlled by fractional crystallisation and possible assimilation. The petrology and chemistry of the few intermediate extrusive rocks show that they were derived from magma mingling or hybridisation. The absence of extrusive rocks of true intermediate magmatic composition and the occurrence of amphibole-bearing felsic xenoliths support the hypothesis of partial melting of the hydrated basalt crust as the main process leading to the generation of rhyolites. The ¹⁴³Nd/¹⁴⁴Nd and ⁸⁷Sr/⁸⁶Sr values of Katla volcanic rocks fit the general isotopic array defined by late Quaternary to Recent lavas from Iceland. A few rock specimens are distinguished by low ¹⁴³Nd/¹⁴⁴Nd values suggesting assimilation and mixing of much older crustal material. Despite their similar whole-rock chemical compositions, the postglacial rhyolitic extrusives differ from the felsic xenoliths by their glass composition and the absence of amphibole. This, together with the general chemical trend of volcanic glasses, indicates that the postglacial rhyolitic extrusives were probably derived by a process involving late reheating and partial melting of crustal material by intrusion of basaltic magmas.     

Combining machine learning techniques,microanalyses and large geochemical datasets for tephrochronological studies in complex volcanic areas: New age constraints for the Pleistocene magmatism of central Italy

Characterization, correlation and provenance determination of tephra samples in sedimentary sections (tephrochronological studies) are powerful tools for establishing ages of depositional events, volcanic eruptions, and tephra dispersion. Despite the large literature and the advancements in this research field, the univocal attribution of tephra deposits to specific volcanic sources remains too often elusive. In this contribution, we test the application of a machine learning technique named Support Vector Machine to attempt shedding new light upon tephra deposits related to one of the most complex and debated volcanic regions on Earth: the Pliocene-Pleistocene magmatism in Italy. The machine learning algorithm was trained using one of the most comprehensive global petrological databases (GEOROC); 17 chemical elements including major (SiO₂, TiO₂, Al₂O₃, Fe₂O_3T, CaO, MgO, MnO, Na₂O, K₂O, P₂O₅) and selected trace (Sr, Ba, Rb, Zr, Nb, La, Ce) elements were chosen as input parameters. We first show the ability of support vector machines in discriminating among different Pliocene-Pleistocene volcanic provinces in Italy and then apply the same methodology to determine the volcanic source of tephra samples occurring in the Caio outcrop, an Early Pleistocene sedimentary section located in Central Italy. Our results show that: 1) support vector machines can successfully resolve high-dimensional tephrochronological problems overcoming the intrinsic limitation of two- and three-dimensional discrimination diagrams; 2) support vector machines can discriminate among different volcanic provinces in complex magmatic regions; 3) in the specific case study, support vector machines indicate that the most probable source for the investigated tephra samples is the so-called Roman Magmatic Province. These results have strong geochronological and geodynamical implications suggesting new age constraints (1.4 Ma instead of 0.8 Ma) for the starting of the volcanic activity in the Roman Magmatic Province.     

Origin and stratigraphy of phreatomagmatic deposits at the Pleistocene Sinker Butte Volcano, Western Snake River Plain, Idaho

Sinker Butte is the erosional remnant of a very large basaltic tuff cone of middle Pleistocene age located at the southern edge of the western Snake River Plain. Phreatomagmatic tephras are exposed in complete sections up to 100 m thick in the walls of the Snake River Canyon, creating an unusual opportunity to study the deposits produced by this volcano through its entire sequence of explosive eruptions. The main objectives of the study were to determine the overall evolution of the Sinker Butte volcano while focusing particularly on the tephras produced by its phreatomagmatic eruptions. Toward this end, twenty-three detailed stratigraphic sections ranging from 20 to 100 m thick were examined and measured in canyon walls exposing tephras deposited around 180° of the circumference of the volcano.Three main rock units are recognized in canyon walls at Sinker Butte: a lower sequence composed of numerous thin basaltic lava flows, an intermediate sequence of phreatomagmatic tephras, and a capping sequence of welded basaltic spatter and more lava flows. We subdivide the phreatomagmatic deposits into two main parts, a series of reworked, mostly subaqueously deposited tephras and a more voluminous sequence of overlying subaerial surge and fall deposits. Most of the reworked deposits are gray in color and exhibit features such as channel scour and fill, planar-stratification, high and low angle cross-stratification, trough cross-stratification, and Bouma-turbidite sequences consistent with their being deposited in shallow standing water or in braided streams. The overlying subaerial deposits are commonly brown or orange in color due to palagonitization. They display a wide variety of bedding types and sedimentary structures consistent with deposition by base surges, wet to dry pyroclastic fall events, and water saturated debris flows.Proximal sections through the subaerial tephras exhibit large regressive cross-strata, planar bedding, and bomb sags suggesting deposition by wet base surges and tephra fallout. Medial and distal deposits consist of a thick sequence of well-bedded tephras; however, the cross-stratified base-surge deposits are thinner and interbedded within the fallout deposits. The average wavelength and amplitude of the cross strata continue to decrease with distance from the vent. These bedded surge and fall deposits grade upward into dominantly fall deposits containing 75–95% juvenile vesiculated clasts and localized layers of welded spatter, indicating a greatly reduced water-melt ratio. Overlying these “dryer” deposits are massive tuff breccias that were probably deposited as water saturated debris flows (lahars). The first appearance of rounded river gravels in these massive tuff breccias indicates downward coring of the diatreme and entrainment of country rock from lower in the stratigraphic section. The “wetter” nature of these deposits suggests a renewed source of external water. The massive deposits grade upward into wet fallout tephras and the phreatomagmatic sequence ends with a dry scoria fall deposit overlain by welded spatter and lava flows.Field observations and two new ⁴⁰Ar–³⁹Ar incremental heating dates suggest the succession of lavas and tephra deposits exposed in this part of the Snake River canyon may all have been erupted from a closely related complex of vents at Sinker Butte. We propose that initial eruptions of lava flows built a small shield edifice that dammed or disrupted the flow of the ancestral Snake River. The shift from effusive to explosive eruptions occurred when the surface water or rising ground water gained access to the vent. As the river cut a new channel around the lava dam, water levels dropped and the volcano returned to an effusive style of eruption.     

Hydrothermal alteration of green tuff belt, Japan: Implications for the influence of seawater/volcanic rock interaction on the seawater chemistry at a back-arc basin

Abstract Chemical data on hydrothermally altered volcanic rocks from a green tuff belt in Japan indicate that the average rate of Mg removal from seawater due to seawater cycling through back-arc basins in the circum-Pacific region during the early to middle Miocene (25–15 Ma) is estimated to be 2.6±1 × 10¹³ g/year. This is similar to that through present-day mid-ocean ridges (2.4 × 10¹³ g/year). Hydrothermal fluxes of K, Ca and Si are calculated to be 4.2±1.6 × 10¹³ g/year, 4.3±1.7×10¹³ g/year and 1.0±0.4 × 10¹⁴ g/year, respectively. These calculated results indicate that the seawater/volcanic rocks interaction at subduction-related tectonic settings have to be taken into account in considering the geochemical mass balance of seawater over geologic time.     

Mechanical intrusion models and their implications for the possibility of magma-driven swarms in NW Bohemia Region

Earthquake swarms are often assumed to be caused by magmatic or fluid intrusions, where the stress changes in the vicinity of the intrusion control the position, strength and rate of seismicity. Fracture mechanical models of natural intrusions or man-made hydrofractures pose constraints on orientation, magnitude, shape and growing rate of fractures and can be used to estimate stress changes in the vicinity of the intrusions. Although the idea of intrusion-induced seismicity is widely accepted, specific comparisons of seismicity patterns with fracture models of stress changes are rarely done. The goal of the study is to review patterns of intrusion-induced earthquake swarms in comparison to the observations of the swarm in NW Bohemia in 2000. We analyse and discuss the theoretical 3D shape of intrusions under mixed mode loading and apparent buoyancy. The aspect ratio and form of the intrusion is used to constrain parameters of the fluid, the surrounding rock and stress. We conclude that the 2000 NW Bohemia swarm could have been driven by a magmatic intrusion. The intrusion was, however, inclined to the maximal principal stress and caused shear displacement additional to opening. We estimate that the density diference between magma and rock was small. The feeding reservoir was possibly much larger than the area affected from earthquakes and may be a vertical dike beneath the swarm region.     

下地幔布里奇曼石与毛钙硅石混溶对大型剪切波低速省长期演化的动力学影响: 二维数值模拟

布里奇曼石（bridgmanite）和毛钙硅石（davemaoite）是下地幔主要的端元矿物,是构成下地幔的重要基石.矿物物理学新的研究发现,在高温高压条件下这两种矿物可以发生混溶,因而可能改变下地幔的物理化学状态.本研究我们在二维地幔对流数值模型中以相变的方式模拟布里奇曼石和毛钙硅石混溶现象,讨论其对地幔热-化学结构（尤其是下地幔大型剪切波低速省）的长期动力学影响.模拟结果显示,布里奇曼石和毛钙硅石混溶更有利于下地幔大型剪切波低速省长期保存,并且这种稳定作用随大型剪切波低速省与周围地幔密度差减小而更加显著,而相变边界的克拉伯龙斜率则在长期演化过程中起次级作用.

     

A study of melt inclusions at Vulcano (Aeolian Islands, Italy): insights on the primitive magmas and on the volcanic feeding system

 This work presents the results of a microthermometric and EPMA-SIMS study of melt inclusions in phenocrysts of rocks of the shoshonitic eruptive complex of Vulcano (Aeolian Islands, Italy). Different primitive magmas related to two different evolutionary series, an older one (50–25 ka) and a younger one (15 ka to 1890 A.D.), were identified as melt inclusions in olivine Fo_88–91 crystals. Both are characterized by high Ca/Al ratio and present very similar Rb/Sr, B/Be and patterns of trace elements, with Nb and Ti anomalies typical of a subduction zone. The two basalts present the same temperature of crystallization (1180±20  °C) and similar volatile abundances. The H₂O, S and Cl contents are relatively high, whereas magmatic CO₂ concentrations are very low, probably due to CO₂ loss before low-pressure crystallization and entrapment of melt inclusions. The mineral chemistry of the basaltic assemblages and the high Ca/Al ratio of melt inclusions indicate an origin from a depleted, metasomatized clinopyroxene-rich peridotitic mantle. The younger primitive melt is characterized with respect to the older one by higher K₂O and incompatible element abundances, by lower Zr/Nb and La/Nb, and by higher Ba/Rb and LREE enrichment. A different degree of partial melting of the same source can explain the chemical differences between the two magmas. However, some anomalies in Sr, Rb and K contents suggest either a slightly different source for the two magmas or differing extents of crustal contamination. Low-pressure degassing and cooling of the basaltic magmas produce shoshonitic liquids. The melt inclusions indicate evolutionary paths via fractional crystallization, leading to trachytic compositions during the older activity and to rhyolitic compositions during the recent one. The bulk-rock compositions record a more complex history than do the melt inclusions, due to the syneruptive mixing processes commonly affecting the magmas erupted at Vulcano. The composition and temperature data on melt inclusions suggest that in the older period of activity several shallow magmatic reservoirs existed; in the younger one a relatively homogeneous feeding system is active. The shallow magmatic reservoir feeding the recent eruptive activity probably has a vertical configuration, with basaltic magma in the deeper zones and differentiated magmas in shallower, low-volume, dike-like reservoirs. Received: 11 March 1998 / Accepted: 14 July 1998     

离散型湖泊水体提取方法精度对比分析

基于卫星遥感的陆地水体提取方法多种多样,并且应用广泛.对于水体分布支离破碎的枯水期湖泊,准确的水体提取方法尚不明晰,直接影响湖泊水域面积的提取精度.以鄱阳湖湖区为研究对象,利用ALOS遥感影像,以2.5 m高分辨率全色波段融合影像非监督分类(ISODATA)得到的水体面积为参考值,分别使用归一化水体指数(NDWI)法、NDWIISODATA法和基于近红外(NIR)的ISODATA法提取了10 m分辨率的水体分布,分析了不同方法提取结果之间的差异性及产生原因.结果表明:3种方法均可以较好地提取出水体,但利用ISODATA法提取的水体细部信息更为明显,面积值较NDWI法更大;相对于近红外单波段而言,基于NDWI图像的ISODATA法提取水体的精度更高.纵观3种方法,基于NDWI图像的ISODATA法提取的水体精度最高,基于近红外波段的ISODATA法提取结果次之,NDWI阈值法的提取效果最差.研究结果对于离散型湖泊水体提取方法及数据源的选择等具有重要的借鉴和参考意义.