Taking the uncertainty in climate-change vulnerability assessment seriously

Climate-change vulnerability assessment has become a frequently employed tool, with the purpose of informing policy-makers attempting to adapt to global change conditions. However, we suggest that there are three reasons to suspect that vulnerability assessment often promises more certainty, and more useful results, than it can deliver. First, the complexity of the system it purports to describe is greater than that described by other types of assessment. Second, it is difficult, if not impossible, to obtain data to test proposed interactions between different vulnerability drivers. Third, the time scale of analysis is too long to be able to make robust projections about future adaptive capacity. We analyze the results from a stakeholder workshop in a European vulnerability assessment, and find evidence to support these arguments. To cite this article: A. Patt et al., C. R. Geoscience 337 (2005).     

Définition de la perméabilité équivalente des massifs fracturés par des méthodes d'homogénéisationDefinition of the permeability of fractured rock masses by homogenisation methods

In the methods used for determination of the hydraulic behaviour at large scale of fractured rock masses, based on the simulation of flow in a fracture network, the mean flux and the mean pressure gradient in the network are not rigorously determined. A method is given for deriving these quantities, in a heterogeneous permeable block, from pressure and flux values on the boundary of the block. A block conductivity tensor is then defined, based on the condition of linear variation of the pressure on the boundary of the block. It is shown that this conductivity tensor is symmetric and positive-definite. An example of application to a model of fractured medium is given. To cite this article: A. Pouya, A. Courtois, C. R. Geoscience 334 (2002) 975–979.     

Effet de la teneur en eau d'un sol sur la réduction bactérienne d'oxydes de fer

Iron-reducing activity of autochthonous bacteria from two temporary hydromorphic soils is evaluated by the study of iron reductive dissolution, as a function of water content. The release of ferrous iron in solution is coupled to the mineralization of soil organic carbon. Water soil saturation is not necessary for iron reductive dissolution, since the highest dissolution is obtained for a wet, but not water-saturated soil (100% of water holding capacity WHC), and dissolution is also very high in a soil at 75% WHC. To cite this article: S.J. Stemmler et al., C. R. Geoscience 336 (2004).     

How reliable are growth strata in interpreting short-term (10 s to 100 s ka) growth structures kinematics?

High-frequency stratigraphic cycles (10 s to 100 s ka) often show, at a specific location, an alternation of ‘dynamic’ (proximal-energetic), and ‘non-dynamic’ (distal-pelagic) processes with time. When sedimentation is syn-deformation, these processes tend respectively to fill-up tectonically-induced topography or to drape it. As a consequence, growth strata are alternatively thickened and isopach across the growth structure. High-resolution kinematic studies of growth structures (folds and faults), which assume that sedimentation always fills up topographies (‘fill-to-the-top’ model), may therefore mistake sedimentary cyclicity for tectonic cyclicity. We address this problem with one example of growth anticline in the Spanish Pyrenees, and we discuss the fill-to-the-top model. To cite this article: S. Castelltort et al., C. R. Geoscience 336 (2004).     

Nature minéralogique et rôle nutritionnel des argiles de sols céréaliers en région subhumide à semi-aride (Tunisie)

The cereal soils of the Northwest of Tunisia derive most of the time, from alluvial deposits or altered remains of carbonated and clayey rocks. Extraction of the clayey fraction permitted to reveal the presence of the following clayey minerals: kaolinite, illite, smectite, chlorite, as well as an illite–smectite interstratified layer, which is present in the deep horizons of the vertisol and in the isohumic soil. The presence of such types of clays shows that the evolution mechanism of soils is weathering of primary minerals inherited from the sedimentary rocks of the Northwest of Tunisia. These clays ensure to soils most of their cationic exchange capacity. Thanks to these clays, which have Ca⁺⁺, Mg⁺⁺ and K⁺ as exchangeable cations, the chemical fertility of these soils is ensured. It may be improved by increasing contents of organic matter, which is naturally few abundant in these soils. To cite this article: H. Ben Hassine, C. R. Geoscience 338 (2006).     

Natural minerals and divided solids: methodology for understanding surface phenomena related to industrial uses and environmental problems

This introductory paper aims at presenting the series of articles in this special issue of Comptes Rendus Geoscience devoted to the study and use of natural minerals. The research methodology that can be applied to the investigation of surface phenomena related to adsorption, exchange and retention onto the surface of natural minerals and divided solids is presented. A special focus is given to the retention of surfactant molecules, in view of their considerable importance in numerous industrial fields, such as, for instance, mineral flotation and enhanced oil recovery. Throughout this introductory paper, the relevance of this research approach to the field of geosciences is stressed by listing various applications where it can provide conclusive answers, especially for environmentally related issues. To cite this article: J.-M. Cases, C. R. Geoscience 334 (2002) 585–596.     

In situ anaerobic degradation of petroleum alkanes in marine sediments: preliminary results

The degradation of acyclic petroleum hydrocarbons was studied during a 24-month experiment in Mediterranean coastal sediments (Gulf of Fos). Sediment cores entirely contaminated with oil (Arabian Light Crude Oil) were incubated in situ. The use of conservative tracers of sediment's particles reworking (luminophores) allowed the distinction of the reworked layer from the anoxic deeper sediments. Using the 17α,21βC₃₀ hopane (C₃₀H) as an inert internal reference, we could demonstrate that, after 24 months of experiment, acyclic petroleum hydrocarbons can be degraded under natural anaerobic conditions. The reactivity of individual alkanes appeared to depend on their chemical structure. To cite this article: D. Massias et al., C. R. Geoscience 335 (2003).To cite this article: D. Massias et al., C. R. Geoscience 335 (2003).     

Premières mesures françaises de gravimétrie absolue dans les régions polaires Antarctique (terre Adélie) et Arctique (Spitzberg)First French measurements of absolute gravity in the Antarctic (Terre Adélie) and Arctic (Spitsbergen) polar regions

This study is devoted to the first French determinations of absolute gravity in the Antarctic (Dumont-d'Urville, Terre Adélie) and Arctic (Ny-Alesund, Spitsbergen) polar regions. The measurements in Dumont-d'Urville were performed in 2000 with the help of the FG5#206 absolute gravimeter belonging to the French geodetic community since beginning 1997; they show a strong noise that causes an uncertainty close to 11 μGal in the determination of the mean gravity value, which will be compared, to a new determination planned for 2005. The Ny-Alesund measurements show on the contrary a noise that, although very variable in time, leads to a gravity determination of better than 5 μGal. The comparison of our value with a previous one two years before suggests a gravity decrease of about 4 μGal which is related to the vertical uplift measured by Very Large Baseline Interferometry (VLBI) at the same site. However, the uncertainty does not allow discriminating between height-to-gravity conversion factors originating from different models. To cite this article: J. Hinderer et al., C. R. Geoscience 334 (2002) 819–826.     

Les sondages électromagnétiques temporels comme outil de reconnaissance du gisement phosphaté de Sidi Chennane (Maroc) : apport à la résolution d'un problème d'exploitation

Exploitation of the phosphatic layers in Sidi Chennane deposit (Morocco) collides frequently with problems bound to the existence, in the phosphatic series, of sterile bodies qualified as derangements. Our study shows that these bodies, masked by the Quaternary cover can be mapped using the Time-Domain ElectroMagnetic Soundings method (TDEM). It is based on the acquisition and the interpretation of a series of tests carried out above a visible derangement in an old trench of exploitation and on 2500 TDEM soundings carried out in a virgin area of the deposit. The article concerns to the analysis of the results and of the proceeding for a possible large geophysics survey. To cite this article: A. Kchikach et al., C. R. Geoscience 338 (2006).     

Stratigraphic architecture of the Pyreneo-Languedocian submarine fan,Gulf of Lions,western Mediterranean Sea

The Pyreneo-Languedocian submarine sediment body, located in the western sector of the Gulf of Lions, is an example of a fan-like depositional system essentially controlled by salt tectonics. The area was subjected to a combined effect of overburden subsidence into the evacuated salt layer and a significant distal salt thickening, due to preferential basinward salt migration. This mode of salt migration impacted the Quaternary sea-bottom morphology by creating a large midslope topographic low, providing space accommodation for the Pyreneo-Languedocian fan. At gulf scale, the fan is a unique feature because unchannelized sedimentary environment in the area occurs at slope level, thus in minor water depth in relation to all other deep-water sedimentary systems offshore Gulf of Lions. To cite this article: A.T. dos Reis et al., C. R. Geoscience 336 (2004).     

Ionic surfactants adsorption on heterogeneous surfacesAdsorption de tensioactifs ioniques sur les surfaces hétérogènes

The adsorption of surfactants from aqueous solution is a phenomenon of major importance in applications ranging from ore flotation and paint technology to enhanced oil recovery. As this paper will illustrate, the process is very complex and of high scientific interest; its results can be extended to the retention of organic compounds (humic and fulvic acids, pollutants...) on solids in the biosphere. For a good understanding of the mechanisms involved in surfactants adsorption at the hydrophilic solid–aqueous solution interface, thermodynamic models have to take into account: (i) the physical chemistry of the surfactant in aqueous solution for choosing the appropriate reference phase, (ii) the surface heterogeneity of the adsorbing solid, (iii) the intensity of normal adsorbate–adsorbent bonds responsible for adsorption, (iv) the intensity of lateral bonds that favour the formation of surface aggregates through cooperative process and finally, (v) suitable theoretical models to describe adsorption phenomena. Once this has been achieved, two systems can be discussed: systems characterised by strong normal adsorbate–adsorbent bonds, currently used in ore flotation, which lead, in the case of heterogeneous surfaces, to the formation of lamellar aggregates at monolayer concentration and bilayer formation for higher concentrations. Systems characterised by weak normal adsorbate–adsorbent bonds, currently used in enhanced oil recovery and hydrocarbon (bio)remediation, which correspond to: (i) formation of globular micelles at the solid surface near the CMC when the temperature is higher than the Krafft point, (ii) formation of bilayered lamellar aggregates in the opposite case, (iii) three-dimensional condensation on substrate (T<T_Krafft) if the ionic surfactant interacts with cations in the bulk. To cite this article: J.-M. Cases et al., C. R. Geoscience 334 (2002) 675–688.     

Manifestations tectono-diapiriques synsédimentaires et polyphasées d'âge Crétacé supérieur–Quaternaire dans la région de Zag Et Tir (Tunisie centre-nord)

The geodynamic evolution of the diapir of Zag Et Tir is the result of the coexistence of the diapiric and tectonic activity from the Upper Cretaceous until the Quaternary. The interference of the tectonic and diapiric phenomena is at the origin of the basin individualization with differential sedimentation during the Miocene. This explains the current distribution of the Neogene deposits on both sides of Zag Et Tir Triassic structure. The submeridian faults that subdivide our sector played a significant role during the Atlasic compression, inducing an unequal distribution of the folds on both sides of these accidents, as well in kind as in number, showing the anteriority of the faults compared to the folds. To cite this article: R.A. Gharbi et al., C. R. Geoscience 337 (2005).     

Preuves de la discordance de l'Ordovicien supérieur dans la zone axiale des Pyrénées : exemple du dôme de la Garonne (Espagne,France)

The geological mapping of the Garonne Dome had already shown an angular unconformity between the Upper Ordovician and the underlying series. This paper presents data from a nearby location, Planelh deth Pas Estret, southeast of the Garonne Dome, where the unconformity can be seen at outcrop scale. The unconformity angles amount to up to 20°. This unconformity is interpreted as a result of an extensional event of pre-Upper Ordovician age. To cite this article: J. Garc??a-Sansegundo et al., C. R. Geoscience 336 (2004).     

Discovery of the Paleo-Tethys residual peridotites along the Anyemaqen–KunLun suture zone (North Tibet)

The spinel peridotite from the Anyemaqen suture contains ?5% residual clinopyroxene and is characterized by a high abundance of the magmaphile elements Fe, Al and Ti in the primary mineral phases. Our data demonstrate that this rock represents residual mantle material, which has been affected by less than 10% partial melting prior to its emplacement. Its textural features indicate that the rock has been plastically deformed in a non-coaxial regime under lithospheric physical conditions at a relatively cool thermal regime below solidus temperature. We suggest that the peridotites from the Anyemaqen suture represent mantle material, which was either emplaced during incipient rifting on the Palaeozoic passive margin of Asia, or uplifted at slow spreading ridge setting in Paleo-Tethyan Ocean. Further researches are needed to make a definite choice between these two alternatives. To cite this article: E.A. Konstantinovskaia et al., C. R. Geoscience 335 (2003).     

Caractérisation de la structure interne et de l'état hydrique de glissements argilo-marneux par tomographie géophysique : l'exemple du glissement-coulée de Super-Sauze (Alpes du Sud,France)

Geophysical methods such as seismic surveying and electrical resistivity imaging appear to be well-adapted to investigate and understand landslide mechanisms. They allow direct and non-intrusive measurement of acoustic velocity and electrical resistivity, two fundamental parameters used to define the physical properties of the reworked moving materials. Both methods were applied at the Super-Sauze site in the French South Alps, where a typical example of an intra-material earthflow-mudslide can be observed. Measurements were taken simultaneously along two orthogonal profiles: one 325 m in length is perpendicular to the axis of the earthflow; the other 235 m in length is located along the axis of the earthflow. The results show a correlation between the seismic and electrical resistivity data, confirming that the simultaneous use of both methods gives complementary information about landslide mechanisms. The seismic data provide information on fracture density variations, whereas the electrical resistivity data provide information on water content variations. To cite this article: G. Grandjean et al., C. R. Geoscience 338 (2006).     

Atténuation de l'intensité macrosismique pour la France métropolitaine : importance de l'intensité épicentrale

The main result of this work is to show that macroseismic intensity decay with distance strongly depends on the epicentral intensity. An attenuation law that takes this parameter into account is proposed for Metropolitan France, from the analysis of SISFRANCE macroseismic database. Such a model significantly reduces the difference between observed and theoretical intensities. A map of the attenuation variations is also set up for Metropolitan France. No major site effects are observed, but at a broad scale, young Alpine regions display a stronger attenuation than old Hercynian regions. To cite this article: P. Arroucau et al., C. R. Geoscience 338 (2006).     

Electrochemical properties of solids at the aqueous–solid interface and heterogeneity of surfacePropriétés électrochimiques des solides à l'interface solide–eau et hétérogénéité de surface

In aqueous medium, solid surfaces are in general electrically charged. The induced electrical and chemical properties govern numerous phenomena, such as colloidal stability or transport of pollutants. Numerous industrial processes make use of these properties. The understanding of the underlying mechanisms at molecular level is of high importance in order to predict and master the behaviour of dispersed matter in the environment and in industrial processes. The present paper shows the evolution of theories and experimental methods, their recent developments and applications. To cite this article: F. Thomas et al., C. R. Geoscience 334 (2002) 633–648.     

Émergence de la complexité dans un modèle simple de comportement mécanique des roches

We propose a mechanical model for the behaviour of rocks based on progressive damage at the elementary scale and elastic interaction. It allows us to simulate several experimental observations: mechanical behaviour ranging from brittle to ductile, fractal structure of the damage, power-law distribution of the damage avalanches. These macroscopic properties are not incorporated at the elementary scale, but are the results of the interaction between elements. This emerging complexity permits us to consider the strain rock process as a complex system characterized by non-linear dynamics. To cite this article: D. Amitrano, C. R. Geoscience 336 (2004).     

Apport d'informations qualitatives pour l'estimation des teneurs en milieux hétérogènes : cas d'une pollution de sols par des hydrocarbures aromatiques polycycliques (HAP)

Grade estimates are often of weak precision in the case of heterogeneous media, due to their high variability, even at small scale. Qualitative information is then useful to improve the quality of the estimates, without prohibitive additional costs. How can we sample such variables, and detect the ones that are of interest for the estimation of grades? The general methodology is presented and then illustrated for the estimation of the benzo(a)pyren (a polycyclic aromatic hydrocarbon, PAH) concentration in soils, sampled on a former coking plant. To cite this article: N. Jeannée, C. de Fouquet, C. R. Geoscience 335 (2003).To cite this article: N. Jeannée, C. de Fouquet, C. R. Geoscience 335 (2003).     

Thermal effects of massive CO2 emissions associated with subduction volcanism

Large volumes of CO₂ are emitted during volcanic activity at convergent plate boundaries, not only from volcanic centres. Their C isotopic signature indicates that this CO₂ is mainly derived from the decarbonation of subducted limestones or carbonated metabasalts, not as often admitted from magma degassing. On the example of Milos (Aegean Sea) it is argued that these fluids originate from intermediate depth in the mantle and carry sufficient heat to account for the generation of subduction-related magmas, as well as for the geothermal manifestations at the surface. The heat that is required for the decarbonation reactions is drawn by conduction from a wide zone surrounding the subducting slab and then rapidly transported upward by convection of the mixed CO₂–H₂O fluids that originate from the sediments in the slab. The transport takes place in a focused way through ‘chimneys’ in the upper mantle, where magmas are generated by the introduced heat and water. In the crust, the hot fluids cause thermal-dome-type metamorphism. In volcanic areas, magmas are commonly held responsible for the major part of heat transfer from the mantle to the surface. Here it is argued that most of the heat transfer is by hot gases. To cite this article: R.D. Schuiling, C. R. Geoscience 336 (2004).