Interaction of Aquifer and River‐Canal Network near Well Field

The article presents semi‐analytical mathematical models to asses (1) enhancements of seepage from a canal and (2) induced flow from a partially penetrating river in an unconfined aquifer consequent to groundwater withdrawal in a well field in the vicinity of the river and canal. The nonlinear exponential relation between seepage from a canal reach and hydraulic head in the aquifer beneath the canal reach is used for quantifying seepage from the canal reach. Hantush's (1967) basic solution for water table rise due to recharge from a rectangular spreading basin in absence of pumping well is used for generating unit pulse response function coefficients for water table rise in the aquifer. Duhamel's convolution theory and method of superposition are applied to obtain water table position due to pumping and recharge from different canal reaches. Hunt's (1999) basic solution for river depletion due to constant pumping from a well in the vicinity of a partially penetrating river is used to generate unit pulse response function coefficients. Applying convolution technique and superposition, treating the recharge from canal reaches as recharge through conceptual injection wells, river depletion consequent to variable pumping and recharge is quantified. The integrated model is applied to a case study in Haridwar (India). The well field consists of 22 pumping wells located in the vicinity of a perennial river and a canal network. The river bank filtrate portion consequent to pumping is quantified.     

Variation of hydrogeochemical characteristics of water in surface flows,shallow wells,and boreholes in the coastal city of Douala (Cameroon)

ABSTRACT

Groundwater is used by 3?million inhabitants in the coastal urban city of Douala, Cameroon, but comprehensive data are too sparse for it to be managed in a sustainable manner. Hence this study aimed to (1) assess the potability of the groundwater; (2) evaluate the spatial variation of groundwater composition; and (3) assess the interaction and recharge mechanisms of different water bodies. Hydrogeochemical tools and methods revealed the following results in the Wouri and Nkappa formations of the Douala basin, which is beneath Douala city: 30% of water samples from hand-dug wells in the shallow Pleistocene alluvium aquifer were saline and highly mineralized. However, water from boreholes in the deeper (49–92 m depth) Palaeocene aquifer was saline-free, less mineralized and potable. Water in the shallow aquifer (0.5–22 m depth) was of Na⁺-K⁺-Cl^?-NO₃^? type and not potable due to point source pollution, whereas Ca⁺-HCO₃^? unpolluted water dominates in the deeper aquifer. Water in the deep and shallow aquifers indicates the results of preferential flow pass and evaporative recharge, respectively. Possible hydrogeochemical processes include point source pollution, reverse ion exchange, remote recharge areas and mixing of waters with different chemical signatures.

EDITOR D. Koutsoyiannis ASSOCIATE EDITOR M.D. Fidelibus     

Monitoring of drawdown pattern during pumping in an unconfined physical aquifer model

In this study, we attempted to analyse a drawdown pattern around a pumping well in an unconfined sandy gravelly aquifer constructed in a laboratory tank by means of both experimental and numerical modelling of groundwater flow. The physical model consisted of recharge, aquifer and discharge zones. Permeability and specific yield of the aquifer material were determined by Dupuit approximation under steady‐state flow and stepwise gravitational drainage of groundwater, respectively. The drawdown of water table in pumping and neighbouring observation wells was monitored to investigate the effect of no‐flow boundary on the drawdown pattern during pumping for three different boundary conditions: (i) no recharge and no discharge with four no‐flow boundaries (Case 1); (ii) no recharge and reservoir with three no‐flow boundaries (Case 2); (iii) recharge and discharge with two no‐flow boundaries (Case 3). Based on the aquifer parameters, numerical modelling was also performed to compare the simulated drawdown with that observed. Results showed that a large difference existed between the simulated drawdown and that observed in wells for all cases. The reason for the difference could be explained by the formation of a curvilinear type water table between wells rather than a linear one due to a delayed response of water table in the capillary fringe. This phenomenon was also investigated from a mass balance study on the pumping volume. The curvilinear type of water table was further evidenced by measurement of water contents at several positions in the aquifer between wells using time domain reflectometry (TDR). This indicates that the existing groundwater flow model applicable to an unconfined aquifer lacks the capacity to describe a slow response of water table in the aquifer and care should be taken in the interpretation of water table formation in the aquifer during pumping. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimal pumping locations of skimming wells

Abstract

A real-life problem involving pumping of groundwater from a series of existing wells along a river flood plain underlain with geologically saline water is examined within a conceptual framework. Unplanned pumping results in upconing of saline water. Therefore, it is necessary to determine optimal locations of fixed capacity pumping wells in space and time from a set of pre-selected candidate wells that minimize total salinity concentration in space and time. The nonlinear, non-convex, combinatorial problem involving zero—one decision variables is solved in a simulation—optimization (S/O) framework. Optimization is accomplished by using simulated annealing (SA)—a search algorithm. The computational burden is primarily managed by replacing the numerical model with a surrogate simulator—artificial neural network (ANN). The computational burden is further reduced through intuitive algorithmic guidance. The model results suggest that the skimming wells must be operated from optimal locations such that they are staggered in space and time to obtain least saline water.     

Modeling Stream-Aquifer Interactions Under Seasonal Groundwater Pumping and Managed Aquifer Recharge

In South Korea, a significant amount of groundwater is used for the heating of water-curtain insulated greenhouses during the winter dry season, which had led to problems of groundwater depletion. A managed aquifer recharge (MAR) project is currently underway with the goal of preventing such groundwater depletion in a typical cultivation area, located on an alluvial aquifer near the Nam River. In the present study, FEFLOW, a three-dimensional finite element model, was used to evaluate different strategies for MAR of the cultivation areas. A conceptual model was developed to simulate the stream-aquifer dynamics under the influence of seasonal groundwater pumping and MAR. The optimal rates and duration of MAR were assessed by analyzing the recovery of the groundwater levels and the change in the groundwater temperature. The simulation results indicate that a MAR rate of 8000 m³/d effectively restores the groundwater level when the injection wells are located inside the groundwater depletion area. It is also demonstrated that starting the MAR before the beginning of the seasonal pumping is more effective. Riverbank filtration is preferable for securing the injection water owing to plentiful source of induced recharge from the river. Locating the pumping wells adjacent to the river where there are thick permeable layers could be a good strategy for minimizing decreases in the groundwater level and temperature.     

Evaluation of the soil water balance in an alluvial flood plain with a shallow groundwater table

Abstract

Many of the hydrological and ecological functions of alluvial flood plains within watersheds depend on the water flow exchanges between the vadoze soil zone and the shallow groundwater. The water balance of the soil in the flood plain is investigated, in order to evaluate the main hydrological processes that underlie the temporal dynamics of soil moisture and groundwater levels. The soil moisture and the groundwater level in the flood plain were monitored continuously for a three-year period. These data were integrated with the results derived from applying a physically-based numerical model which simulated the variably-saturated vertical water flow in the soil. The analysis indicated that the simultaneous processes of lateral groundwater flow and the vertical recharge from the unsaturated zone caused the observed water table fluctuations. The importance of these flows in determining the rises in the water table varied, depending on soil moisture and groundwater depth before precipitation. The monitoring period included two hydrological years (September 2009–September 2011). About 13% of the precipitation vertically recharged the groundwater in the first year and about 50% in the second. The difference in the two recharge coefficients was in part due to the lower groundwater levels in the recharge season of the first hydrological year, compared to those observed in the second. In the latter year, the shallow groundwater increased the soil moisture in the unsaturated zone due to capillary rise, and so the mean hydraulic conductivity of the unsaturated soil was high. This moisture state of soil favoured a more efficient conversion of infiltrated precipitation into vertical groundwater recharge. The results show that groundwater dynamics in the flood plain are an important source of temporal variability in soil moisture and vertical recharge processes, and this variability must be properly taken into account when the water balance is investigated in shallow groundwater environments.

Citation Pirastru, M. and Niedda, M., 2013. Evaluation of the soil water balance in an alluvial flood plain with a shallow groundwater table. Hydrological Sciences Journal, 58 (4), 898–911.     

Aquifer modelling of the Ganga–Mahawa sub‐basin,a part of the Central Ganga Plain,Uttar Pradesh,India

The Ganga–Mahawa sub‐basin, which has an area of 1280 km² forms the western part of the Central Ganga Plain in the Moradabad and Badaun districts of western Uttar Pradesh, India. The Bundelkhand granite forms the basement complex, overlain unconformably by the upper Vindhyan sequence, which is further overlain by the Neogene (Middle and Upper) Siwaliks and finally by Quaternary alluvium. Four geomorphological units, the Varanasi older alluvial plain, Aligarh older alluvial plain, terrace zones and the Ganga recent floodplain, abandoned channels, channel scars and meander scars represent various landforms. The hydrogeological cross‐sections indicate the occurrence of a single aquifer down to 120 m. Some influent seepage from the River Ganga could be seen around Gangeswari, but the rest of the River Ganga is effluent. Groundwater‐flow modelling was carried out to assess the degree of Ganga river and aquifer interaction. The River Ganga marks the western boundary; boundaries to the northeast and southeast are set as fixed heads to simulate lateral inflow into and outflow from the sub‐basin respectively. The eastern boundary is simulated as a no‐flow condition. The Mahawa and Badmar rivers are considered to be effluent. The area modelled is covered by a grid of 34 rows×46 columns with three layers, viz., an unconfined aquifer, an aquitard which is underlain by a semi‐confined to confined aquifer. The permeability distribution was inferred from morphometric analysis and pumping tests. Natural recharge due to monsoon rainfall forms the main input. The River Ganga stage data at Ahar, Naora and Ramghat has been used for assigning surface water levels and river bed elevations in the model. Abstraction from all existing deep and shallow tube wells has been assigned as output at various cells. A steady state flow simulation was carried out and calibrated against the June 1986 water level; subsequent transient conditions were calibrated up to May 1995. The computed groundwater balance was comparable to that estimated from field investigations. The aquifer modelling study has attempted to integrate all available information and provided a tool that could be used for predictive simulation. Copyright © 2000 John Wiley & Sons, Ltd.     

Patterns and dynamics of river–aquifer exchange with variably-saturated flow using a fully-coupled model

The parallel physically-based surface–subsurface model PARFLOW was used to investigate the spatial patterns and temporal dynamics of river–aquifer exchange in a heterogeneous alluvial river–aquifer system with deep water table. Aquifer heterogeneity at two scales was incorporated into the model. The architecture of the alluvial hydrofacies was represented based on conditioned geostatistical indicator simulations. Subscale variability of hydraulic conductivities (K) within hydrofacies bodies was created with a parallel Gaussian simulation. The effects of subscale heterogeneity were investigated in a Monte Carlo framework. Dynamics and patterns of river–aquifer exchange were simulated for a 30-day flow event. Simulation results show the rapid formation of saturated connections between the river channel and the deep water table at preferential flow zones that are characterized by high conductivity hydrofacies. Where the river intersects low conductivity hydrofacies shallow perched saturated zones immediately below the river form, but seepage to the deep water table remains unsaturated and seepage rates are low. Preferential flow zones, although only taking up around 50% of the river channel, account for more than 98% of total seepage. Groundwater recharge is most efficiently realized through these zones. Subscale variability of K_sat slightly increased seepage volumes, but did not change the general seepage patterns (preferential flow zones versus perched zones). Overall it is concluded that typical alluvial heterogeneity (hydrofacies architecture) is an important control of river–aquifer exchange in rivers overlying deep water tables. Simulated patterns and dynamics are in line with field observations and results from previous modeling studies using simpler models. Alluvial heterogeneity results in distinct patterns and dynamics of river–aquifer exchange with implications for groundwater recharge and the management of riparian zones (e.g. river channel-floodplain connectivity via saturated zones).     

Factors Governing Sustainable Groundwater Pumping near a River

The objective of this paper was to provide new insights into processes affecting riverbank filtration (RBF). We consider a system with an inflatable dam installed for enhancing water production from downstream collector wells. Using a numerical model, we investigate the impact of groundwater pumping and dam operation on the hydrodynamics in the aquifer and water production. We focus our study on two processes that potentially limit water production of an RBF system: the development of an unsaturated zone and riverbed clogging. We quantify river clogging by calibrating a time‐dependent riverbed permeability function based on knowledge of pumping rate, river stage, and temperature. The dynamics of the estimated riverbed permeability reflects clogging and scouring mechanisms. Our results indicate that (1) riverbed permeability is the dominant factor affecting infiltration needed for sustainable RBF production; (2) dam operation can influence pumping efficiency and prevent the development of an unsaturated zone beneath the riverbed only under conditions of sufficient riverbed permeability; (3) slow river velocity, caused by dam raising during summer months, may lead to sedimentation and deposition of fine‐grained material within the riverbed, which may clog the riverbed, limiting recharge to the collector wells and contributing to the development of an unsaturated zone beneath the riverbed; and (4) higher river flow velocities, caused by dam lowering during winter storms, scour the riverbed and thus increase its permeability. These insights can be used as the basis for developing sustainable water management of a RBF system.     

Impacts on groundwater recharge areas of megacity pumping: analysis of potential contamination of Kolkata,India, water supply

Abstract

Water supply to the world’s megacities is a problem of quantity and quality that will be a priority in the coming decades. Heavy pumping of groundwater beneath these urban centres, particularly in regions with low natural topographic gradients, such as deltas and floodplains, can fundamentally alter the hydrological system. These changes affect recharge area locations, which may shift closer to the city centre than before development, thereby increasing the potential for contamination. Hydrogeological simulation analysis allows evaluation of the impact on past, present and future pumping for the region of Kolkata, India, on recharge area locations in an aquifer that supplies water to over 13 million people. Relocated recharge areas are compared with known surface contamination sources, with a focus on sustainable management of this urban groundwater resource. The study highlights the impacts of pumping on water sources for long-term development of stressed city aquifers and for future water supply in deltaic and floodplain regions of the world.

Editor D. Koutsoyiannis

Citation Sahu, P., Michael, H.A., Voss, C.I., and Sikdar, P.K., 2013. Impacts on groundwater recharge areas of megacity pumping: analysis of potential contamination of Kolkata, India, water supply. Hydrological Sciences Journal, 58 (6), 1340–1360.     

USE OF TRITIUM IN HYDROLOGY

SUMMARY

The Coastal Plain aquifer of Israel, of Plio-Pleistocene Age, stretches from Binyamina in the North to the Gaza Strip in the South-a distance of about 112 km and has an average width of about 15 Km. The allowed withdrawal is estimated at about 200 MCM/year.

As a result of an average yearly withdrawal of 426 MCM/year during the last 10 years the water levels dropped to a dangerously low position (-2)-(-4) m below sea level at distances of 3–5 Km from the coast, causing sea water intrusion which, in Tel Aviv and Emek Hefer, endangered water supply wells.

As a counter-measure, artificial groundwater recharge through wells was practiced in Emek Hefer since 1959. Recharge was practiced in 7 wells at a rate of 6 MCM/year, the water coming from adjacent Cretaceous limestone aquifers.

In Tel Aviv a fresh water barrier was established in 1964 by injecting Lake Kinereth water into 17 wells during winter at a rate of 6 MCM/winter. In the rest of the Coastal Plain water was injected to the aquifer through about 40–45 wells at a total yearly rate of about 10–12 MCM.

Recharge by spreading is practiced in Yavneh at a rate of about 10–13 MCM per winter, also recharge by spreading is practiced with flood water of Nahal Shikma at a rate of up to 8 MCM/winter.     

Influence of aquifer properties and the spatial and temporal distribution of recharge and abstraction on sustainable yields in semi‐arid regions

This paper aims to contribute to understanding the importance of four factors on the determination of sustainable yields: (i) aquifer properties; (ii) temporal distribution of recharge; (iii) temporal distribution of groundwater pumping; and (iv) spatial distribution of pumping wells. It is important to comprehend how the present‐day and future vulnerability of groundwater systems to pumping activities depend on these critical factors and what the risks are of considering sustainable yield as a fixed percentage of mean annual recharge (MAR). A numerical model of the Querença–Silves aquifer in Portugal is used to develop hypothetical scenarios with which these factors are studied. Results demonstrate the aquifer properties, particularly the storage coefficient, have an important role in determining the resilience of an aquifer and therefore to which degree it is dependent on the spatial and temporal distribution of abstraction and recharge, as well as the occurrence of extreme events. Sustainable yields are determined for the developed scenarios based on specific criteria rather than a fraction of MAR. Under simplified current recharge and abstraction conditions, the sustainable yield was determined at approximately 73% of MAR or 76 million m³. When considering a concentration of rainfall in time, as predicted by climate scenarios for the region, sustainable yield could drop to ca 70% of MAR. However, a more even distribution of pumping volumes throughout the year could increase this value. The location of the pumping wells is seen to affect the distribution of hydraulic heads in the aquifer, albeit without significant changes in sustainable yield. Copyright © 2011 John Wiley & Sons, Ltd.     

Geometry and dynamics of the freshwater—seawater interface in a coastal aquifer in southeastern Spain

Abstract

The contact between freshwater and seawater in coastal aquifers is studied using a relatively simple model for homogeneous aquifers. However, for real aquifers it is not so simple. The desalination plant built to supply water to the city of Almería is situated over the aquifer in the southern part of the River Andarax Delta. Its design capacity is 1100 L s^?1, and it is supplied from boreholes pumping water from beneath the freshwater—seawater contact in this aquifer. Well logs kept over a period of two years have allowed us to accurately define the interface geometry of the freshwater—seawater contact. Lithological data collected from 31 boreholes have also indicated the existence of strata with low hydraulic conductivity, within others of high conductivity. During a simultaneous pumping test of six wells with 690 L s^?1 total discharge, electrical conductivity measurements showed the influx of seawater 6–10 m below sea level and a drawdown of the interface in the piezometers closest to the pumping wells.     

Capture Versus Capture Zones: Clarifying Terminology Related to Sources of Water to Wells

The term capture, related to the source of water derived from wells, has been used in two distinct yet related contexts by the hydrologic community. The first is a water‐budget context, in which capture refers to decreases in the rates of groundwater outflow and (or) increases in the rates of recharge along head‐dependent boundaries of an aquifer in response to pumping. The second is a transport context, in which capture zone refers to the specific flowpaths that define the three‐dimensional, volumetric portion of a groundwater flow field that discharges to a well. A closely related issue that has become associated with the source of water to wells is streamflow depletion, which refers to the reduction in streamflow caused by pumping, and is a type of capture. Rates of capture and streamflow depletion are calculated by use of water‐budget analyses, most often with groundwater‐flow models. Transport models, particularly particle‐tracking methods, are used to determine capture zones to wells. In general, however, transport methods are not useful for quantifying actual or potential streamflow depletion or other types of capture along aquifer boundaries. To clarify the sometimes subtle differences among these terms, we describe the processes and relations among capture, capture zones, and streamflow depletion, and provide proposed terminology to distinguish among them.     

The influence of local hydrogeologic forcings on near‐stream event water recharge and retention (Upper San Pedro River,Arizona)

The rise in stream stage during high flow events (floods) can induce losing stream conditions, even along stream reaches that are gaining during baseflow conditions. The aquifer response to flood events can affect the geochemical composition of both near‐stream groundwater and post‐event streamflow, but the amount and persistence of recharged floodwater may differ as a function of local hydrogeologic forcings. As a result, this study focuses on how vertical flood recharge varies under different hydrogeologic forcings and the significance that recharge processes can have on groundwater and streamflow composition after floods. River and shallow groundwater samples were collected along three reaches of the Upper San Pedro River (Arizona, USA) before, during and after the 2009 and 2010 summer monsoon seasons. Tracer data from these samples indicate that subsurface floodwater propagation and residence times are strongly controlled by the direction and magnitude of the dominant stream–aquifer gradient. A reach that is typically strongly gaining shows minimal floodwater retention shortly after large events, whereas the moderately gaining and losing reaches can retain recharged floodwater from smaller events for longer periods. The moderately gaining reach likely returned flood recharge to the river as flow declined. These results indicate that reach‐scale differences in hydrogeologic forcing can control (i) the amount of local flood recharge during events and (ii) the duration of its subsurface retention and possible return to the stream during low‐flow periods. Our observations also suggest that the presence of floodwater in year‐round baseflow is not due to long‐term storage beneath the streambed along predominantly gaining reaches, so three alternative mechanisms are suggested: (i) repeated flooding that drives lateral redistribution of previously recharged floodwater, (ii) vertical recharge on the floodplain during overbank flow events and (iii) temporal variability in the stream–aquifer gradient due to seasonally varying water demands of riparian vegetation. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydraulic modeling of riverbank filtration systems with curved boundaries using analytic elements and series solutions

A new analytic solution approach is presented for the modeling of steady flow to pumping wells near rivers in strip aquifers; all boundaries of the river and strip aquifer may be curved. The river penetrates the aquifer only partially and has a leaky stream bed. The water level in the river may vary spatially. Flow in the aquifer below the river is semi-confined while flow in the aquifer adjacent to the river is confined or unconfined and may be subject to areal recharge. Analytic solutions are obtained through superposition of analytic elements and Fourier series. Boundary conditions are specified at collocation points along the boundaries. The number of collocation points is larger than the number of coefficients in the Fourier series and a solution is obtained in the least squares sense. The solution is analytic while boundary conditions are met approximately. Very accurate solutions are obtained when enough terms are used in the series. Several examples are presented for domains with straight and curved boundaries, including a well pumping near a meandering river with a varying water level. The area of the river bottom where water infiltrates into the aquifer is delineated and the fraction of river water in the well water is computed for several cases.     

Atrazine in a Stream-Aquifer System: Estimation of Aquifer Properties from Atrazine Concentration Profiles

Lincolns municipal wellfield consists of 44 wells developed in an alluvial aquifer adjacent to the Platte River near Ashland, Nebraska Induced recharge from the river is the primary source of water for the wellfield. Wafer samples were collected on a periodic basis from the Platte River arid two transects of monitoring wells. These samples were analyzed for the herbicide atrazine, which was used as a tracer of induced recharge in this stream-aquifer system. Atrazine concentrations in the river and aquifer were much less than 1.0 ppb during late fall and winter, but increased to as high as 18.9 ppb during spring and summer, associated with runoff from upgradient agricultural lands. There was approximately a 21-day lag time from the first detection of increasing atrazine concentration in the river to the first detection in monitoring wells immediately adjacent to the river. This lag time was relatively constant throughout the year and from one year to the next, even with major fluctuations of river stage and wellfield production. This consistency of lag time indicated that the travel times from the river to the first set of monitoring wells immediately adjacent to the river were fairly constant.
Paths of preferential flow were identified in the aquifer at a depth of 25 to 35 feet below land surface. This aquifer zone appeared to play a significant role in movement of water from beneath the river into the wellfield.
Aquifer dispersivity was calculated using a method described by Hoehn and Santschi (1987). Macrodispersivity (A_L) was shown to increase linearly over the scale of the wellfield. Calculated values of A_L were within limits of other reported values for this type of aquifer material and agreed well with values reported by Hoehn and Santschi (1987); These findings will be extremely beneficial for planning and management of the municipal wellfield.     

Radiocarbon and δ13C Values Related to Ground-Water Recharge and Mixing

Ground-water levels in the Upper Floridan aquifer beneath the southeastern coast of South Carolina have undergone pumpage-induced declines approaching 20 ft below sea level at the southern end of Hilton Head Island. This scenario suggests the potential exists for the inducement of recharge to the Upper Floridan aquifer across the island, which could affect the quality of water being pumped by wells. However, low radiocarbon concentrations in ground-water samples (0.5 to 1.4 ± 0.1 PMC) indicate that most of the water is relict ground water reflecting prepumpage ground-water flow conditions in the Upper Floridan aquifer. The isotopic data indicate long residence times and water-chemistry evolution more characteristic of ground-water recharge occurring farther inland prior to the commencement of pumpage in the late 1800s. Radiocarbon concentrations (as Percent Modern Carbon) and stable carbon isotope ratios (as δ¹³C in dissolved inorganic carbon) determined during this study and reported in other studies on and around Hilton Head Island varied in a systematic manner. Heavier δ¹³C values (–2.8 to –1.6 per mil) in ground water beneath southern Hilton Head Island reflect ground-water discharge from prepumpage flowpaths originating over 100 miles away, hence a depletion in radiocarbon concentration with corrected ground-water ages no younger than 16,000 yrs BP. In contrast, lighter δ¹³C values (–13.9 to –8.67 per mil) beneath the northern part of the island indicate recent recharge as a result of water-level declines, and recharge in areas off the island that have not changed as a result of pumpage (evidenced by enrichment in radiocarbon with corrected ground-water ages no older than 4,000 yrs BP). This suggests that the δ¹³C composition of ground water in the Upper Floridan aquifer is a useful indicator of mixing between ground waters from different sources, and can be used to delineate recharge-discharge patterns. This approach may be applicable to other aquifers of highly evolved ground-water chemistry in regional carbonate aquifer systems that may be receiving recent recharge. Moreover, this approach could prove useful in delineating the contribution of recent water being captured by pumped wells as part of wellhead protection programs designed to assess aquifer vulnerability from surficial contaminant sources.     

The response of idealized aquifer/river systems to climate change

Abstract

A study of the effect of changes in climate on aquifer storage and river recharge using a simple model of an idealized aquifer/river system shows the combined influence of aquifer properties and climate change scenario on the system response. The study shows that changes in the seasonal distribution of recharge may have a critical effect on low flows in rivers supported by baseflow. However, rivers supported by slowly responding aquifers may show a considerable delay in response to climate change allowing an opportunity for water resources planning over an extended period.     

Strategies for offsetting seasonal impacts of pumping on a nearby stream

Ground water pumping from aquifer systems that are hydraulically connected to streams depletes streamflow. The amplitude and timing of stream depletion depend on the stream depletion factor (SDF(i)) of the pumping wells, which is a function of aquifer hydraulic characteristics and the distance from the wells to the stream. Wells located at different locations, but having the same SDF and the same rate and schedule of pumping, will deplete streamflow equally. Wells with small SDF(i) deplete streamflow approximately synchronously with pumping. Wells with large SDF(i) deplete streamflow at approximately a constant rate throughout the year, regardless of the pumping schedule. For large values of SDF(i), artificial recharge that occurs on a different schedule from pumping can offset streamflow depletion effectively. The requirements are (1) that the pumping and recharge wells both have the same SDF(i) and (2) that the annual total quantities of recharge and pumping be equal. At larger SDF(i) values, it takes longer for pumping to impact streamflow in a wide aquifer than it does in a narrow aquifer. In basins that are closed to further withdrawals because streamflow is fully allocated, water-use changes replace new allocations as the source of water for new developments. Ground water recharge can be managed to offset the impacts of new ground water developments, allowing for changes in the timing and source of withdrawals from a basin without injuring existing users or instream flows.