Uncertainty analysis of flood inundation modelling using GLUE with surrogate models in stochastic sampling

A generalized likelihood uncertainty estimation (GLUE) method incorporating moving least squares (MLS) with entropy for stochastic sampling (denoted as GLUE‐MLS‐E) was proposed for uncertainty analysis of flood inundation modelling. The MLS with entropy (MLS‐E) was established according to the pairs of parameters/likelihoods generated from a limited number of direct model executions. It was then applied to approximate the model evaluation to facilitate the target sample acceptance of GLUE during the Monte‐Carlo‐based stochastic simulation process. The results from a case study showed that the proposed GLUE‐MLS‐E method had a comparable performance as GLUE in terms of posterior parameter estimation and predicted confidence intervals; however, it could significantly reduce the computational cost. A comparison to other surrogate models, including MLS, quadratic response surface and artificial neural networks (ANN), revealed that the MLS‐E outperformed others in light of both the predicted confidence interval and the most likely value of water depths. ANN was shown to be a viable alternative, which performed slightly poorer than MLS‐E. The proposed surrogate method in stochastic sampling is of practical significance in computationally expensive problems like flood risk analysis, real‐time forecasting, and simulation‐based engineering design, and has a general applicability in many other numerical simulation fields that requires extensive efforts in uncertainty assessment. Copyright © 2014 John Wiley & Sons, Ltd.     

Bayesian updating of flood inundation likelihoods conditioned on flood extent data

Previously we have detailed an application of the generalized likelihood uncertainty estimation (GLUE) procedure to estimate spatially distributed uncertainty in models conditioned against binary pattern data contained in flood inundation maps. This method was applied to two sites where a single consistent synoptic image of inundation extent was available to test the simulation performance of the method. In this paper, we extend this to examine the predictive performance of the method for a reach of the River Severn, west‐central England. Uniquely for this reach, consistent inundation images of two major floods have been acquired from spaceborne synthetic aperture radars, as well as a high‐resolution digital elevation model derived using laser altimetry. These data thus allow rigorous split sample testing of the previous GLUE application. To achieve this, Monte Carlo analyses of parameter uncertainty within the GLUE framework are conducted for a typical hydraulic model applied to each flood event. The best 10% of parameter sets identified in each analysis are then used to map uncertainty in flood extent predictions using the method previously proposed for both an independent validation data set and a design flood. Finally, methods for combining the likelihood information derived from each Monte Carlo ensemble are examined to determine whether this has the potential to reduce uncertainty in spatially distributed measures of flood risk for a design flood. The results show that for this reach and these events, the method previously established is able to produce sharply defined flood risk maps that compare well with observed inundation extent. More generally, we show that even single, poor‐quality inundation extent images are useful in constraining hydraulic model calibrations and that values of effective friction parameters are broadly stationary between the two events simulated, most probably reflecting their similar hydraulics. Copyright © 2004 John Wiley & Sons, Ltd.     

Estimating uncertainty associated with water stages from a single SAR image

It is the goal of remote sensing to infer information about objects or a natural process from a remote location. This invokes that uncertainty in measurement should be viewed as central to remote sensing. In this study, the uncertainty associated with water stages derived from a single SAR image for the Alzette (G.D. of Luxembourg) 2003 flood is assessed using a stepped GLUE procedure. Main uncertain input factors to the SAR processing chain for estimating water stages include geolocation accuracy, spatial filter window size, image thresholding value, DEM vertical precision and the number of river cross sections at which water stages are estimated. Initial results show that even with plausible parameter values uncertainty in water stages over the entire river reach is 2.8 m on average. Adding spatially distributed field water stages to the GLUE analysis following a one-at-a-time approach helps to considerably reduce SAR water stage uncertainty (0.6 m on average) thereby identifying appropriate value ranges for each uncertain SAR water stage processing factor. For the GLUE analysis a Nash-like efficiency criterion adapted to spatial data is proposed whereby acceptable SAR model simulations are required to outperform a simpler regression model based on the field-surveyed average river bed gradient. Weighted CDFs for all factors based on the proposed efficiency criterion allow the generation of reliable uncertainty quantile ranges and 2D maps that show the uncertainty associated with SAR-derived water stages. The stepped GLUE procedure demonstrated that not all field data collected are necessary to achieve maximum constraining. A possible efficient way to decide on relevant locations at which to sample in the field is proposed. It is also suggested that the resulting uncertainty ranges and flood extent or depth maps may be used to evaluate 1D or 2D flood inundation models in terms of water stages, depths or extents. For this, the extended GLUE approach, which copes with the presence of uncertainty in the observed data, may be adopted.     

Assessing the uncertainty in distributed model predictions using observed binary pattern information within GLUE

In this paper we extend the generalized likelihood uncertainty estimation (GLUE) technique to estimate spatially distributed uncertainty in models conditioned against binary pattern data contained in flood inundation maps. Untransformed binary pattern data already have been used within GLUE to estimate domain‐averaged (zero‐dimensional) likelihoods, yet the pattern information embedded within such sources has not been used to estimate distributed uncertainty. Where pattern information has been used to map distributed uncertainty it has been transformed into a continuous function prior to use, which may introduce additional errors. To solve this problem we use here ‘raw’ binary pattern data to define a zero‐dimensional global performance measure for each simulation in a Monte Carlo ensemble. Thereafter, for each pixel of the distributed model we evaluate the probability that this pixel was inundated. This probability is then weighted by the measure of global model performance, thus taking into account how well a given parameter set performs overall. The result is a distributed uncertainty measure mapped over real space. The advantage of the approach is that it both captures distributed uncertainty and contains information on global likelihood that can be used to condition predictions of further events for which observed data are not available. The technique is applied to the problem of flood inundation prediction at two test sites representing different hydrodynamic conditions. In both cases, the method reveals the spatial structure in simulation uncertainty and simultaneously enables mapping of flood probability predicted by the model. Spatially distributed uncertainty analysis is shown to contain information over and above that available from global performance measures. Overall, the paper highlights the different types of information that may be obtained from mappings of model uncertainty over real and n‐dimensional parameter spaces. Copyright © 2002 John Wiley & Sons, Ltd.     

An event simulation approach to the assessment of flood level frequencies: risk maps for the Warsaw reach of the River Vistula

Flood risk assessment is customarily performed using a design flood. Observed past flows are used to derive a flood frequency curve which forms the basis for a construction of a design flood. The simulation of a distributed model with the 1‐in‐T year design flood as an input gives information on the possible inundation areas, which are used to derive flood risk maps. The procedure is usually performed in a deterministic fashion, and its extension to take into account the design flood‐and flow routing model uncertainties is computer time consuming. In this study we propose a different approach to flood risk assessment which consists of the direct simulation of a distributed flow routing model for an observed series of annual maximum flows and the derivation of maps of probability of inundation of the desired return period directly from the obtained simulations of water levels at the model cross sections through an application of the Flood Level Frequency Analysis. The hydraulic model and water level quantile uncertainties are jointly taken into account in the flood risk uncertainty evaluation using the Generalized Likelihood Uncertainty Estimation (GLUE) approach. An additional advantage of the proposed approach lies in smaller uncertainty of inundation predictions for long return periods compared to the standard approach. The approach is illustrated using a design flood level and a steady‐state solution of a hydraulic model to derive maps of inundation probabilities. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantifying the relative impact of hydrological and hydraulic modelling parameterizations on uncertainty of inundation maps

ABSTRACT

Flood risk management strongly relies on inundation models for river basin zoning in flood-prone and risk-free areas. Floodplain zoning is significantly affected by the diverse and concurrent uncertainties that characterize the modelling chain used for producing inundation maps. In order to quantify the relative impact of the uncertainties linked to a lumped hydrological (rainfall–runoff) model and a FLO-2D hydraulic model, a Monte Carlo procedure is proposed in this work. The hydrological uncertainty is associated with the design rainfall estimation method, while the hydraulic model uncertainty is associated with roughness parameterization. This uncertainty analysis is tested on the case study of the Marta coastal catchment in Italy, by comparing the different frequency, extent and depth of inundation simulations associated with varying rainfall forcing and/or hydraulic model roughness realizations. The results suggest a significant predominance of the hydrological uncertainty with respect to the hydraulic one on the overall uncertainty associated with the simulated inundation maps.     

Testing new sources of topographic data for flood propagation modelling under structural,parameter and observation uncertainty

ABSTRACT

This study assessed the utility of EUDEM, a recently released digital elevation model, to support flood inundation modelling. To this end, a comparison with other topographic data sources was performed (i.e. LIDAR, light detection and ranging; SRTM, Shuttle Radar Topographic Mission) on a 98-km reach of the River Po, between Cremona and Borgoforte (Italy). This comparison was implemented using different model structures while explicitly accounting for uncertainty in model parameters and upstream boundary conditions. This approach facilitated a comprehensive assessment of the uncertainty associated with hydraulic modelling of floods. For this test site, our results showed that the flood inundation models built on coarse resolutions data (EUDEM and SRTM) and simple one-dimensional model structure performed well during model evaluation.

Editor Z.W. Kundzewicz; Associate editor S. Weijs     

Joint Monte Carlo and possibilistic simulation for flood damage assessment

A joint Monte Carlo and fuzzy possibilistic simulation (MC-FPS) approach was proposed for flood risk assessment. Monte Carlo simulation was used to evaluate parameter uncertainties associated with inundation modeling, and fuzzy vertex analysis was applied for promulgating human-induced uncertainty in flood damage estimation. A study case was selected to show how to apply the proposed method. The results indicate that the outputs from MC-FPS would present as fuzzy flood damage estimate and probabilistic-possibilistic damage contour maps. The stochastic uncertainty in the flood inundation model and fuzziness in the depth-damage functions derivation would cause similar levels of influence on the final flood damage estimate. Under the worst scenario (i.e. a combined probabilistic and possibilistic uncertainty), the estimated flood damage could be 2.4 times higher than that computed from conventional deterministic approach; considering only the pure stochastic effect, the flood loss would be 1.4 times higher. It was also indicated that uncertainty in the flood inundation modeling has a major influence on the standard deviation of the simulated damage, and that in the damage-depth function has more notable impact on the mean of the fitted distributions. Through applying MC-FPS, rich information could be derived under various α-cut levels and cumulative probabilities, and it forms an important basis for supporting rational decision making for flood risk management under complex uncertainties.     

Comparison of parameter uncertainty analysis techniques for a TOPMODEL application

Parameter uncertainty in hydrologic modeling is crucial to the flood simulation and forecasting. The Bayesian approach allows one to estimate parameters according to prior expert knowledge as well as observational data about model parameter values. This study assesses the performance of two popular uncertainty analysis (UA) techniques, i.e., generalized likelihood uncertainty estimation (GLUE) and Bayesian method implemented with the Markov chain Monte Carlo sampling algorithm, in evaluating model parameter uncertainty in flood simulations. These two methods were applied to the semi-distributed Topographic hydrologic model (TOPMODEL) that includes five parameters. A case study was carried out for a small humid catchment in the southeastern China. The performance assessment of the GLUE and Bayesian methods were conducted with advanced tools suited for probabilistic simulations of continuous variables such as streamflow. Graphical tools and scalar metrics were used to test several attributes of the simulation quality of selected flood events: deterministic accuracy and the accuracy of 95 % prediction probability uncertainty band (95PPU). Sensitivity analysis was conducted to identify sensitive parameters that largely affect the model output results. Subsequently, the GLUE and Bayesian methods were used to analyze the uncertainty of sensitive parameters and further to produce their posterior distributions. Based on their posterior parameter samples, TOPMODEL’s simulations and the corresponding UA results were conducted. Results show that the form of exponential decline in conductivity and the overland flow routing velocity were sensitive parameters in TOPMODEL in our case. Small changes in these two parameters would lead to large differences in flood simulation results. Results also suggest that, for both UA techniques, most of streamflow observations were bracketed by 95PPU with the containing ratio value larger than 80 %. In comparison, GLUE gave narrower prediction uncertainty bands than the Bayesian method. It was found that the mode estimates of parameter posterior distributions are suitable to result in better performance of deterministic outputs than the 50 % percentiles for both the GLUE and Bayesian analyses. In addition, the simulation results calibrated with Rosenbrock optimization algorithm show a better agreement with the observations than the UA’s 50 % percentiles but slightly worse than the hydrographs from the mode estimates. The results clearly emphasize the importance of using model uncertainty diagnostic approaches in flood simulations.     

Improvement of a drainage system for flood management with assessment of the potential effects of climate change

Abstract

Runoff discharge in the Tuku lowlands, Taiwan, has increased with land development. Frequent floods caused by extreme weather conditions have resulted in considerable economic and social losses in recent years. Currently, numerous infrastructures have been built in the lowland areas that are prone to inundation; the measures and solutions for flood mitigation focus mainly on engineering aspects. Public participation in the development of principles for future flood management has helped both stakeholders and engineers. An integrated drainage–inundation model, combining a drainage flow model with a two-dimensional overland-flow inundation model is used to evaluate the flood management approaches with damage loss estimation. The proposed approaches include increasing drainage capacity, using fishponds as retention ponds, constructing pumping stations, and building flood diversion culverts. To assess the effects on the drainage system of projected increase of rainfall due to climate change, for each approach simulations were performed to obtain potential inundation extent and depth in terms of damage losses. The results demonstrate the importance of assessing the impacts of climate change for implementing appropriate flood management approaches.

Editor Z.W. Kundzewicz

Citation Chang, H.-K., Tan, Y.-C., Lai, J.-S., Pan, T.-Y., Liu, T.-M., and Tung, C.-P., 2013. Improvement of a drainage system for flood management with assessment of the potential effects of climate change. Hydrological Sciences Journal, 58 (8), 1581–1597.     

Assessment of flood forecasting lead time based on generalized likelihood uncertainty estimation approach

Real time updating of rainfall-runoff (RR) models is traditionally performed by state-space formulation in the context of flood forecasting systems. In this paper, however, we examine applicability of generalized likelihood uncertainty estimation (GLUE) approach in real time modification of forecasts. Real time updating and parameter uncertainty analysis was conducted for Abmark catchment, a part of the great Karkheh basin in south west of Iran. A conceptual-distributed RR model, namely ModClark, was used for basin simulation, such that the basin’s hydrograph was determined by the superposition of runoff generated by individual cells in a raster-based discretization. In real time updating of RR model by GLUE method, prior and posterior likelihoods were computed using forecast errors that were obtained from the results of behavioral models and real time recorded discharges. Then, prior and posterior likelihoods were applied to modify forecast confidence limits in each time step. Calibration of parameters was performed using historical data while distribution of parameters was modified in real time based on new data records. Two scenarios of rainfall forecast including prefect-rainfall-forecast and no-rainfall-forecast were assumed in absence of a robust rainfall forecast model in the study catchment. The results demonstrated that GLUE application could offer an acceptable lead time for peak discharge forecast at the expense of high computational demand.     

Comparing 2D capabilities of HEC-RAS and LISFLOOD-FP on complex topography

ABSTRACT

This study evaluates and compares two-dimensional (2D) numerical models of different complexities by testing them on a floodplain inundation event that occurred on the Secchia River (Italy). We test 2D capabilities of LISFLOOD-FP and HEC-RAS (5.0.3), implemented using various grid sizes (25–100 m) based on 1-m DEM resolution. As expected, the best results were shown by the higher-resolution grids (25 m) for both models, which is justified by the complex terrain of the area. However, the coarser resolution simulations (50 and 100 m) performed virtually identically compared to the high-resolution simulations. Nevertheless, the spatial distribution of flood characteristics varies: the 50 and 100 m results of LISFLOOD-FP and HEC-RAS misestimated flood extent and water depth in selected control areas (built-up zones). We suggest that the specific terrain of the area can cause ambiguities in large-scale modelling, while providing plausible results in terms of the overall model performance.     

Numerical investigation of the impact of uncertainties in satellite rainfall estimation and land surface model parameters on simulation of soil moisture

This study aims at evaluating the uncertainty in the prediction of soil moisture (1D, vertical column) from an offline land surface model (LSM) forced by hydro-meteorological and radiation data. We focus on two types of uncertainty: an input error due to satellite rainfall retrieval uncertainty, and, LSM soil-parametric error. The study is facilitated by in situ and remotely sensed data-driven (precipitation, radiation, soil moisture) simulation experiments comprising a LSM and stochastic models for error characterization. The parametric uncertainty is represented by the generalized likelihood uncertainty estimation (GLUE) technique, which models the parameter non-uniqueness against direct observations. Half-hourly infra-red (IR) sensor retrievals were used as satellite rainfall estimates. The IR rain retrieval uncertainty is characterized on the basis of a satellite rainfall error model (SREM). The combined uncertainty (i.e., SREM + GLUE) is compared with the partial assessment of uncertainty. It is found that precipitation (IR) error alone may explain moderate to low proportion of the soil moisture simulation uncertainty, depending on the level of model accuracy—50–60% for high model accuracy, and 20–30% for low model accuracy. Comparisons on the basis of two different sites also yielded an increase (50–100%) in soil moisture prediction uncertainty for the more vegetated site. This study exemplified the need for detailed investigations of the rainfall retrieval-modeling parameter error interaction within a comprehensive space-time stochastic framework for achieving optimal integration of satellite rain retrievals in land data assimilation systems.     

Estimation of flood inundation probabilities using global hazard indexes based on hydrodynamic variables

In this paper a new procedure to derive flood hazard maps incorporating uncertainty concepts is presented. The layout of the procedure can be resumed as follows: (1) stochastic input of flood hydrograph modelled through a direct Monte-Carlo simulation based on flood recorded data. Generation of flood peaks and flow volumes has been obtained via copulas, which describe and model the correlation between these two variables independently of the marginal laws involved. The shape of hydrograph has been generated on the basis of a historical significant flood events, via cluster analysis; (2) modelling of flood propagation using a hyperbolic finite element model based on the DSV equations; (3) definition of global hazard indexes based on hydro-dynamic variables (i.e., water depth and flow velocities). The GLUE methodology has been applied in order to account for parameter uncertainty. The procedure has been tested on a flood prone area located in the southern part of Sicily, Italy. Three hazard maps have been obtained and then compared.     

Generalized likelihood uncertainty estimation (GLUE) using adaptive Markov Chain Monte Carlo sampling

In the last few decades hydrologists have made tremendous progress in using dynamic simulation models for the analysis and understanding of hydrologic systems. However, predictions with these models are often deterministic and as such they focus on the most probable forecast, without an explicit estimate of the associated uncertainty. This uncertainty arises from incomplete process representation, uncertainty in initial conditions, input, output and parameter error. The generalized likelihood uncertainty estimation (GLUE) framework was one of the first attempts to represent prediction uncertainty within the context of Monte Carlo (MC) analysis coupled with Bayesian estimation and propagation of uncertainty. Because of its flexibility, ease of implementation and its suitability for parallel implementation on distributed computer systems, the GLUE method has been used in a wide variety of applications. However, the MC based sampling strategy of the prior parameter space typically utilized in GLUE is not particularly efficient in finding behavioral simulations. This becomes especially problematic for high-dimensional parameter estimation problems, and in the case of complex simulation models that require significant computational time to run and produce the desired output. In this paper we improve the computational efficiency of GLUE by sampling the prior parameter space using an adaptive Markov Chain Monte Carlo scheme (the Shuffled Complex Evolution Metropolis (SCEM-UA) algorithm). Moreover, we propose an alternative strategy to determine the value of the cutoff threshold based on the appropriate coverage of the resulting uncertainty bounds. We demonstrate the superiority of this revised GLUE method with three different conceptual watershed models of increasing complexity, using both synthetic and real-world streamflow data from two catchments with different hydrologic regimes.     

A method to reduce the computational requirement while assessing uncertainty of complex hydrological models

The quantification of uncertainty in the simulations from complex physically based distributed hydrologic models is important for developing reliable applications. The generalized likelihood uncertainty estimation method (GLUE) is one of the most commonly used methods in the field of hydrology. The GLUE helps reduce the parametric uncertainty by deriving the probability distribution function of parameters, and help analyze the uncertainty in model output. In the GLUE, the uncertainty of model output is analyzed through Monte Carlo simulations, which require large number of model runs. This induces high computational demand for the GLUE to characterize multi-dimensional parameter space, especially in the case of complex hydrologic models with large number of parameters. While there are a lot of variants of GLUE that derive the probability distribution of parameters, none of them have addressed the computational requirement in the analysis. A method to reduce such computational requirement for GLUE is proposed in this study. It is envisaged that conditional sampling, while generating ensembles for the GLUE, can help reduce the number of model simulations. The mutual relationship between the parameters was used for conditional sampling in this study. The method is illustrated using a case study of Soil and Water Assessment Tool (SWAT) model on a watershed in the USA. The number of simulations required for the uncertainty analysis was reduced by 90 % in the proposed method compared to existing methods. The proposed method also resulted in an uncertainty reduction in terms of reduced average band width and high containing ratio.     

The potential application of finite element modelling of flood plain inundation to predict patterns of overbank deposition

Abstract

Mathematical modelling of overbank inundation and flows faces many problems and is still in its infancy. Work to date has generally been restricted to small reaches. Large-scale models based on longer reaches of river channel are likely to be of greater value for engineering and flood plain management purposes, but the problems associated with the transition from small to large scales need to be assessed. A large-scale finite element model, RMA-2, has been applied to the flood plain of the lower reaches of the River Culm in southeast Devon, UK. Patterns of radiocaesium accumulation by overbank accretion during flood water inundation were used to assess the potential of using such models for explaining sedimentation rates and patterns. A strong correlation was found between values of the ¹³⁷Cs inventory and surface concentration and the predicted flood water patterns derived using the RMA-2 model. Except where recession pondage occurs, an inverse relationship existed between ¹³⁷Cs deposition and water depth. However, the discretization model developed cannot presently cope with large-scale compartmentalization of flows by barriers to flow and small-scale local features, such as ditches crossing the flood plain and the microtopography of the flood plain. This study appraises the potential for using the RMA-2 model to predict patterns of overbank deposition and represents an initial stage in the development of an integrated model of hydraulic and sediment dynamics.     

Urban fluvial flood modelling using a two‐dimensional diffusion‐wave treatment,part 1: mesh resolution effects

High‐resolution data obtained from airborne remote sensing is increasing opportunities for representation of small‐scale structural elements (e.g. walls, buildings) in complex floodplain systems using two‐dimensional (2D) models of flood inundation. At the same time, 2D inundation models have been developed and shown to provide good predictions of flood inundation extent, with respect to both full solution of the depth‐averaged Navier–Stokes equations and simplified diffusion‐wave models. However, these models have yet to be applied extensively to urban areas. This paper applies a 2D raster‐based diffusion‐wave model to determine patterns of fluvial flood inundation in urban areas using high‐resolution topographic data and explores the effects of spatial resolution upon estimated inundation extent and flow routing process. Model response shows that even relatively small changes in model resolution have considerable effects on the predicted inundation extent and the timing of flood inundation. Timing sensitivity would be expected, given the relatively poor representation of inertial processes in a diffusion‐wave model. Sensitivity to inundation extent is more surprising, but is associated with: (1) the smoothing effect of mesh coarsening upon input topographical data; (2) poorer representation of both cell blockage and surface routing processes as the mesh is coarsened, where the flow routing is especially complex; and (3) the effects of (1) and (2) upon water levels and velocities, which in turn determine which parts of the floodplain the flow can actually travel to. It is shown that the combined effects of wetting and roughness parameters can compensate in part for a coarser mesh resolution. However, the coarser the resolution, the poorer the ability to control the inundation process, as these parameters not only affect the speed, but also the direction of wetting. Thus, high‐resolution data will need to be coupled to a more sophisticated representation of the inundation process in order to obtain effective predictions of flood inundation extent. This is explored in a companion paper. Copyright © 2005 John Wiley & Sons, Ltd.     

Uncertainty in floodplain delineation: expression of flood hazard and risk in a Gulf Coast watershed

This paper investigates the development of flood hazard and flood risk delineations that account for uncertainty as improvements to standard floodplain maps for coastal watersheds. Current regulatory floodplain maps for the Gulf Coastal United States present 1% flood hazards as polygon features developed using deterministic, steady‐state models that do not consider data uncertainty or natural variability of input parameters. Using the techniques presented here, a standard binary deterministic floodplain delineation is replaced with a flood inundation map showing the underlying flood hazard structure. Additionally, the hazard uncertainty is further transformed to show flood risk as a spatially distributed probable flood depth using concepts familiar to practicing engineers and software tools accepted and understood by regulators. A case study of the proposed hazard and risk assessment methodology is presented for a Gulf Coast watershed, which suggests that storm duration and stage boundary conditions are important variable parameters, whereas rainfall distribution, storm movement, and roughness coefficients contribute less variability. The floodplain with uncertainty for this coastal watershed showed the highest variability in the tidally influenced reaches and showed little variability in the inland riverine reaches. Additionally, comparison of flood hazard maps to flood risk maps shows that they are not directly correlated, as areas of high hazard do not always represent high risk. Copyright © 2012 John Wiley & Sons, Ltd.     

A hydro‐economic modelling framework for flood damage estimation and the role of riparian vegetation

A modelling framework for the quick estimate of flood inundation and the resultant damages is developed in this paper. The model, called the flood economic impact analysis system (FEIAS), can be applied to a river reach of any hydrogeological river basin. For the development of the integrated modelling framework, three models were employed: (1) a modelling scheme based on the Hydrological Simulation Program FORTRAN model that was developed for any geomorphological river basin, (2) a river flow/floodplain model, and (3) a flood loss estimation model. The first sub‐model of the flood economic impact analysis system simulates the hydrological processes for extended periods of time, and its output is used as input to a second component, the river/floodplain model. The hydraulic model MIKE 11 (quasi‐2D) is the river/floodplain model employed in this study. The simulated flood parameters from the hydraulic model MIKE 11 (quasi‐2D) are passed, at the end of each time step, to a third component, the flood loss model for the estimation of flood damage. In the present work, emphasis was given to the seasonal variation of Manning's coefficient (n), which is an important parameter for the determination of the flood inundation in hydraulic modelling. High values of Manning's coefficient for a channel indicate high flow resistance. The riparian vegetation can have a large impact on channel resistance. The modelling framework developed in this paper was used to investigate the role of riparian vegetation in reducing flood damage. Moreover, it was used to investigate the influence of cutting riparian vegetation scenarios on the flow characteristics. The proposed framework was applied to the downstream part of the Koiliaris River basin in Crete, Greece, and was tested and validated with historical data. Copyright © 2012 John Wiley & Sons, Ltd.