Modelling surface‐water depression storage in a Prairie Pothole Region

In this study, the Precipitation‐Runoff Modelling System (PRMS) was used to simulate changes in surface‐water depression storage in the 1,126‐km² Upper Pipestem Creek basin located within the Prairie Pothole Region of North Dakota, USA. The Prairie Pothole Region is characterized by millions of small water bodies (or surface‐water depressions) that provide numerous ecosystem services and are considered an important contribution to the hydrologic cycle. The Upper Pipestem PRMS model was extracted from the U.S. Geological Survey's (USGS) National Hydrologic Model (NHM), developed to support consistent hydrologic modelling across the conterminous United States. The Geospatial Fabric database, created for the USGS NHM, contains hydrologic model parameter values derived from datasets that characterize the physical features of the entire conterminous United States for 109,951 hydrologic response units. Each hydrologic response unit in the Geospatial Fabric was parameterized using aggregated surface‐water depression area derived from the National Hydrography Dataset Plus, an integrated suite of application‐ready geospatial datasets. This paper presents a calibration strategy for the Upper Pipestem PRMS model that uses normalized lake elevation measurements to calibrate the parameters influencing simulated fractional surface‐water depression storage. Results indicate that inclusion of measurements that give an indication of the change in surface‐water depression storage in the calibration procedure resulted in accurate changes in surface‐water depression storage in the water balance. Regionalized parameterization of the USGS NHM will require a proxy for change in surface‐storage to accurately parameterize surface‐water depression storage within the USGS NHM.     

Development of a SWAT extension module to simulate riparian wetland hydrologic processes at a watershed scale

Using a mass balance algorithm, this study develops an extension module that can be embedded in the commonly used Soil and Water Assessment Tool (SWAT). This module makes it possible to assess effects of riparian wetlands on runoff and sediment yields at a watershed scale, which is very important for aquatic ecosystem management but rarely documented in the literature. In addition to delineating boundaries of a watershed and its subwatersheds, the module groups riparian wetlands within a subwatershed into an equivalent wetland for modelling purposes. Further, the module has functions to compute upland drainage area and other parameters (e.g. maximum volume) for the equivalent wetland based on digital elevation model, stream network, land use, soil and wetland distribution GIS datasets. SWAT is used to estimate and route runoff and sediment generated from upland drainage area. The lateral exchange processes between riparian wetlands and their hydraulically connected streams are simulated by the extension module. The developed module is empirically applied to the 53 km² Upper Canagagigue Creek watershed located in Southern Ontario of Canada. The simulation results indicate that the module can make SWAT more reasonably predict flow and sediment loads at the outlet of the watershed and better represent the hydrologic processes within it. The simulation is sensitive to errors of wetland parameters and channel geometry. The approach of embedding the module into SWAT enables simulation of hydrologic processes in riparian wetlands, evaluation of wetland effects on regulating stream flow and sediment loading and assessment of various wetland restoration scenarios. Copyright © 2008 John Wiley & Sons, Ltd.     

Assessing the performance and uncertainty analysis of the SWAT and RBNN models for simulation of sediment yield in the Nagwa watershed,India

Abstract

The process-based Soil and Water Assessment Tool (SWAT) model and the data-driven radial basis neural network (RBNN) model were evaluated for simulating sediment load for the Nagwa watershed in Jharkhand, India, where soil erosion is a severe problem. The SWAT model calibration and uncertainty analysis were performed with the Sequential Uncertainty Fitting algorithm version 2 and the bootstrap technique was applied on the RBNN model to analyse uncertainty in model output. The percentage of data bracketed by the 95% prediction uncertainty (95PPU) and the r factor were the two measures used to assess the goodness of calibration. Comparison of the results of the two models shows that the value of r factor (r = 0.41) in the RBNN model is less than that of SWAT model (r = 0.79), which means there is a wider prediction interval for the SWAT model results. More values of observed sediment yield were bracketed by the 95PPU in the RBNN model. Thus, the RBNN model estimates the sediment yield values more accurately and with less uncertainty.

Editor D. Koutsoyiannis; Associate editor H. Aksoy

Citation Singh, A., Imtiyaz, M., Isaac, R.K., and Denis, D.M., 2014. Assessing the performance and uncertainty analysis of the SWAT and RBNN models for simulation of sediment yield in the Nagwa watershed, India. Hydrological Sciences Journal, 59 (2), 351–364.     

Effect of best management practice implementation on sediment and phosphorus load reductions at subwatershed and watershed scale using SWAT model

Identification of areas contributing disproportionately high amount of pollutants (i.e., critical source areas (CSAs)) to streams is important to efficiently and effectively target best management practices (BMPs). Process-based models are commonly used to identify CSAs and evaluate the impact of alternative management practices on pollutant load reductions. The objective of this study was to use the Soil and Watershed Assessment Tool (SWAT) to identify CSAs at the subwatershed level and evaluate the impact of alternative BMPs on sediment and total phosphorus (TP) load reductions in the Pleasant Valley watershed (50 km2) in South Central Wisconsin (USA). The Nash-Sutcliffe efficiency, percent bias, and coefficient of determination ranged from 0.58 to 0.71, ? 12.87 to 38.33, and 0.67 to 0.79, respectively, indicating that SWAT was able to predict stream flow, sediment and TP loadings at a monthly time-step with sufficient accuracy. Based on the SWAT simulation results, annual average (2006–2012) sub-watershed yield for sediment and TP ranged from 0.06 to 3.14 tons ha?1 yr?1 and 0.04 to 1.9 kg ha ? 1 yr ? 1, respectively. The croplands were the major source of sediment and TP in this watershed ( Z 84%). Reduction in sediment and TP loading ranged from 66%to 99%at the subwatershed level after conversion of croplands to Conservation Reserve Program (CRP) grasslands in subwatersheds identified as CSAs. On the other hand, reduction in sediment and TP loading with implementation of no-till practices ranged from only 14%to 25%. At the watershed outlet, sediment and TP loading reduction was r 15% after conversion of croplands to CRP grasslands and implementation of no-till practices because only about 8%of the watershed area was targeted for BMPs and/or resuspension of sediment deposited on the stream bed masked the downstream improvements in water quality.     

Modelling sediment and total phosphorus export from a lowland catchment: comparing sediment routing methods

Bank erosion is the main source of suspended sediment (SS) and diffuse total phosphorus (TP) in many lowland catchments. This study compared a physically based sediment routing method (Physical method), which distinguishes between stream bed and bank erosion, with the original sediment routing method (Original method) within the Soil and Water Assessment Tool (SWAT) version 2009, for simulating SS and TP losses from a lowland catchment. A SWAT model was set up for the lowland River Odense catchment in Denmark and calibrated against observed stream flow and phosphate (PO₄) loads. On the basis of an initial calibration of hydrological and PO₄ parameters, the SWAT model with the Original method (Original model) and the SWAT model with the Physical method (Physical model) were calibrated separately against observed SS and TP loads. The SWAT model simulated daily stream flow well but underestimated PO₄ loads. The Physical model simulated daily SS and TP better than the Original model. The simulated contribution of bank erosion to SS in the Physical model (99%) was close to the estimated contribution from in situ erosion measurements (90–94%). Compared with the Original method, the Physical method is not only more conceptually correct but also improves model performance. Copyright © 2014 John Wiley & Sons, Ltd.     

Predicting phosphorus dynamics in complex terrains using a variable source area hydrology model

Phosphorus (P) loss from agricultural watersheds has long been a critical water quality problem, the control of which has been the focus of considerable research and investment. Preventing P loss depends on accurately representing the hydrological and chemical processes governing P mobilization and transport. The Soil and Water Assessment Tool (SWAT) is a watershed model commonly used to predict run‐off and non‐point source pollution transport. SWAT simulates run‐off employing either the curve number (CN) or the Green and Ampt methods, both assume infiltration‐excess run‐off, although shallow soils underlain by a restricting layer commonly generate saturation‐excess run‐off from variable source areas (VSA). In this study, we compared traditional SWAT with a re‐conceptualized version, SWAT‐VSA, that represents VSA hydrology, in a complex agricultural watershed in east central Pennsylvania. The objectives of this research were to provide further evidence of SWAT‐VSA's integrated and distributed predictive capabilities against measured surface run‐off and stream P loads and to highlight the model's ability to drive sub‐field management of P. Thus, we relied on a detailed field management database to parameterize the models. SWAT and SWAT‐VSA predicted discharge similarly well (daily Nash–Sutcliffe efficiencies of 0.61 and 0.66, respectively), but SWAT‐VSA outperformed SWAT in predicting P export from the watershed. SWAT estimated lower P loss (0.0–0.25 kg ha^?1) from agricultural fields than SWAT‐VSA (0.0–1.0+ kg ha^?1), which also identified critical source areas – those areas generating large run‐off and P losses at the sub‐field level. These results support the use of SWAT‐VSA in predicting watershed‐scale P losses and identifying critical source areas of P loss in landscapes with VSA hydrology. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact of climate change on stream discharge and sediment yield in Northern Viet Nam

The purpose of this paper is to apply “Soil and Water Assessment Tool (SWAT)” model to assess the impacts of climate change on stream discharge and sediment yield from Song Cau watershed in Northern Viet Nam. Three climate change scenarios B1, B2, and A2; representing low, medium, and high levels of greenhouse gas emission, respectively, were considered in this study. The highest changes in stream discharge (up to 11.4%) and sediment load (15.3%) can be expected in wet season in 2050s according to the high emission scenario (A2), while for the low emission scenario the corresponding changes equal to 8.8% and 12.6%. The results show that the stream discharge is likely to increase in the future during the wet season with increasing threats of sedimentation.     

SWAT-based runoff and sediment simulation in a small watershed,the loessial hilly-gullied region of China:capabilities and challenges

Model calibration and validation are necessary before applying it for scenario assessment and watershed management.This study presented the methodology of evaluating Soil and Water Assessment Tool(SWAT) and tested the feasibility of SWAT on runoff and sediment load simulation in the Zhifanggou watershed located in hilly-gullied region of China.Daily runoff and sediment event data from 1998-2008 were used in this study;data from 1998-2003 were used for calibration and 2004-2008 for validation.The evaluation statistics for the daily runoff simulation showed that the model results were acceptable,but the model underestimated the runoff for high-flow events.For sediment load simulation,the SWAT performed well in capturing the trend of sediment load,while the model tended to underestimate sediment load during both the calibration and validation periods. The disparity between observed and simulated data most likely resulted from limitations of the existing SCS-CN and MUSLE methods in the model.This study indicated that the modification of SWAT components is needed to take rainfall intensity and its duration into account to enhance the model performance on peak flow and sediment load simulation during heavy rainfall season.     

SWAT-based hydrological modelling of tropical land-use scenarios

Abstract

The Hulu Langat basin, a strategic watershed in Malaysia, has in recent decades been exposed to extensive changes in land-use and consequently hydrological conditions. In this work, the impact of Land Use and Cover Change (LUCC) on hydrological conditions (water discharge and sediment load) of the basin were investigated using the Soil and Water Assessment Tool (SWAT). Four land-use scenarios were defined for land-use change impact analysis, i.e. past, present (baseline), future and water conservation planning. The land-use maps, dated 1984, 1990, 1997 and 2002, were defined as the past scenarios for LUCC impact analysis. The present scenario was defined based on the 2006 land-use map. The 2020 land-use map was simulated using a cellular automata-Markov model and defined as the future scenario. Water conservation scenarios were produced based on guidelines published by Malaysia’s Department of Town and Country Planning and Department of Environment. Model calibration and uncertainty analysis was performed using the Sequential Uncertainty Fitting (SUFI-2) algorithm. The model robustness for water discharge simulation for the period 1997–2008 was good. However, due to uncertainties, mainly resulting from intense urban development in the basin, its robustness for sediment load simulation was only acceptable for the calibration period 1997–2004. The optimized model was run using different land-use maps over the periods 1997–2008 and 1997–2004 for water discharge and sediment load estimation, respectively. In comparison to the baseline scenario, SWAT simulation using the past and conservative scenarios showed significant reduction in monthly direct runoff and monthly sediment load, while SWAT simulation based on the future scenario showed significant increase in monthly direct runoff, monthly sediment load and groundwater recharge.

Editor D. Koutsoyiannis; Associate editor C. Perrin     

Identification of soil erosion and fluvial sediment problems

A computer model has been used to estimate soil loss and sediment yield from irregular field-size units of small watersheds. Input to the model includes spring data (i.e. relating to February through May) for the independent variables of the Universal Soil Loss Equation, and for factors such as surface roughness, an index of overland runoff, and proximity to the stream. Output from the model includes maps of seasonal estimates of potential soil losses, field sediment delivery ratios, and expected sediment yields. On the basis of selected erosion and sediment yield tolerances, the output information has been analysed to identify watershed areas which (1) exhibit both erosion and sediment yield problems; (2) exhibit only erosion problems; (3) exhibit only sediment yield problems; and (4) exhibit neither erosion nor sediment yield problems. The percentage of the watershed area in each category and the percentage of the watershed soil loss and sediment loads contributed by each category are also identified. Application of the procedure for planning remedial control programs for five watersheds is discussed.     

Characterizing and classifying urban watersheds with compositional and structural attributes

Current land-use classifications used to assess urbanization effects on stream water quality date back to the 1980s when limited information was available to characterize watershed attributes that mediate non-point source pollution. With high resolution remote sensing and widely used GIS tools, there has been a vast increase in the availability and precision of geospatial data of built environments. In this study, we leverage geospatial data to expand the characterization of developed landscapes and create a typology that allows us to better understand the impact of complex developed landscapes across the rural to urban gradient. We assess the ability of the developed landscape typology to reveal patterns in stream water chemistry previously undetected by traditional land-cover based classification. We examine the distribution of land-cover, infrastructure, topography and geology across 3876 National Hydrography Dataset Plus catchments in the Piedmont region of North Carolina, USA. From this dataset, we generate metrics to evaluate the abundance, density and position of landscape features relative to streams, catchment outlets and topographic wetness metrics. While impervious surfaces are a key distinguishing feature of the urban landscape, sanitary infrastructure, population density and geology are better predictors of baseflow stream water chemistry. Unsupervised clustering was used to generate a distinct developed landscape typology based on the expanded, high-resolution landscape feature information. Using stream chemistry data from 37 developed headwater catchments, we compared the baseflow water chemistry grouped by traditional land-cover based classes of urbanization (rural, low, medium and high density) to our composition and structure-based classification (a nine-class typology). The typology based on 22 metrics of developed landscape composition and structure explained over 50% of the variation in NO₃⁻-N, TDN, DOC, Cl⁻, and Br⁻ concentration, while the ISC-based classification only significantly explained 23% of the variation in TDN. These results demonstrate the importance of infrastructure, population and geology in defining developed landscapes and improving discrete classes for water management.     

Integration of remotely sensed C factor into SWAT for modelling sediment yield

The C factor, representing the impact of plant and ground cover on soil loss, is one of the important factors of the Modified Universal Soil Loss Equation (MUSLE) in the Soil and Water Assessment Tool (SWAT) to model sediment yield. The daily update of C factors in SWAT was originally determined by land use types and plant growth cycles. This does not reflect the spatial variation of C values that exists within a large land use area. We present a new approach to integrate remotely sensed C factors into SWAT for highlighting the effect of detailed vegetative cover data on soil erosion and sediment yield. First, the C factor was estimated using the abundance of ground components extracted from remote sensing images. Then, the gridding data of the C factor were aggregated to hydrological response units (HRUs), instead of to land use units of SWAT. In the end, the C factor values in HRUs were integrated into SWAT to predict sediment yield by modifying the ysed subroutine. This substitution work not only increases the spatial variation of the C factor in SWAT, but also makes it possible to utilize other sources of C databases rather than those from the United States. The demonstration in the Dage basin shows that the modified SWAT produces reasonable results in water flow simulation and sediment yield prediction using remotely sensed C values. The Nash–Sutcliffe efficiency coefficient (E_NS) and R² for surface runoff range from 0·69 to 0·77 and 0·73 to 0·87, respectively. The coefficients E_NS and R² for sediment yield were generally above 0·70 and 0·60, respectively. The soil erosion risk map based on sediment yield prediction at the HRU level illustrates instructive details on spatial distribution of soil loss. Copyright © 2011 John Wiley & Sons, Ltd.     

Modelling the impacts of subsurface drainage on surface runoff and sediment yield in the Le Sueur Watershed,Minnesota, USA

Abstract

Tile drainage influences infiltration and surface runoff and is thus an important factor in the erosion process. Tile drainage reduces surface runoff, but questions abound on its influence on sediment transport through its dense network and into the stream network. The impact of subsurface tiling on upland erosion rates in the Le Sueur River watershed, USA, was assessed using the Water Erosion Prediction Project (WEPP) model. Six different scenarios of tile drainage with varying drainage coefficient and management type (no till and autumn mulch-till) were evaluated. The mean annual surface runoff depth, soil loss rate and sediment delivery ratio (SDR) for croplands, based on a 30-year simulation for the watershed with untiled autumn mulch-till (Scenario 1), were estimated to be 83.5 mm, 0.27 kg/m² and 86.7%, respectively; on no-till management systems (Scenario 4), the respective results were 72.3 mm, 0.06 kg/m² and 88.2%. Tile drains reduced surface runoff, soil loss and SDR estimates for Scenario 1 by, on average, 14.5, 8.1 and 7.9%, respectively; and for Scenario 4 by an estimated 31.5, 22.1 and 20.2%, respectively. The impact of tile drains on surface runoff, soil loss and SDR was greater under the no-till management system than under the autumn mulch-till management system. Comparison of WEPP outputs with those of the Soil Water Assessment Tool (SWAT) showed differences between the two methods.

Editor Z.W. Kundzewicz

Citation Maalim, F.K. and Melesse. A.M., 2013. Modelling impacts of subsurface drainage on surface runoff and sediment yield in the Le Sueur Watershed in Minnesota, USA. Hydrological Sciences Journal, 58 (3), 570–586.     

Hydrologic comparison between a forested and a wetland/lake dominated watershed using SWAT

The Soil and Water Assessment Tool (SWAT) is a physically‐based hydrologic model developed for agricultural watersheds, which has been infrequently validated for forested watersheds, particularly those with deep overwinter snow accumulation and abundant lakes and wetlands. The goal of this study was to determine the applicability of SWAT for modelling streamflow in two watersheds of the Ontonagon River basin of northern Michigan which differ in proportion of wetland and lake area. The forest‐dominated East Branch watershed contains 17% wetland and lake area, whereas the wetland/lake‐dominated Middle Branch watershed contains 26% wetland and lake area. The specific objectives were to: (1) calibrate and validate SWAT models for the East Branch and Middle Branch watersheds to simulate monthly stream flow, and (2) compare the effects of wetland and lake abundance on the magnitude and timing of streamflow. Model calibration and validation was satisfactory, as determined by deviation of discharge D and Nash and Sutcliffe coefficient values E that compared simulated monthly mean discharge versus measured monthly mean discharge. Streamflow simulation discrepancies occurred during summer and fall months and dry years. Several snow melting parameters were found to be critical for the SWAT simulation: TIMP (snow temperature lag factor) and SMFMX and SMFMN (melting factors). Snow melting parameters were not transferable between adjacent watersheds. Differences in seasonal pattern of long‐term monthly streamflow were found, with the forest‐dominated watershed having a higher peak flow during April but a lower flow during the remainder of the year in comparison to the wetland and lake‐dominated watershed. The results suggested that a greater proportion of wetland and lake area increases the capacity of a watershed to impound surface runoff and to delay storm and snow melting events. Representation of wetlands and lakes in a watershed model is required to simulate monthly stream flow in a wetland/lake‐dominated watershed. Copyright © 2007 John Wiley & Sons, Ltd.     

Hydrological modelling of a small watershed using generated rainfall in the soil and water assessment tool model

An adequately tested soil and water assessment tool (SWAT) model was applied to the runoff and sediment yield of a small agricultural watershed in eastern India using generated rainfall. The capability of the model for generating rainfall was evaluated for a period of 18 years (1981–1998). The watershed and subwatershed boundaries, drainage networks, slope, soil series and texture maps were generated using a geographical information system (GIS). A supervised classification method was used for land‐use/cover classification from satellite imageries. Model simulated monthly rainfall for the period of 18 years was compared with observations. Simulated monthly rainfall, runoff and sediment yield values for the monsoon season of 8 years (1991–1998) were also compared with their observed values. In general monthly average rainfall predicted by the model was in close agreement with the observed monthly average values. Also, simulated monthly average values of surface runoff and sediment yield using generated rainfall compared well with observed values during the monsoon season of the years 1991–1998. Results of this study revealed that the SWAT model can generate monthly average rainfall satisfactorily and thereby can produce monthly average values of surface runoff and sediment yield close to the observed values. Therefore, it can be concluded that the SWAT model could be used for developing a multiple year management plan for the critical erosion prone areas of a small watershed. Copyright © 2004 John Wiley & Sons, Ltd.     

Distinct effects of temperature change on discharge and non-point pollution in subtropical southern China by SWAT simulation

Abstract

Climate change impacts on the availability of water resources. Projection of hydrological response to temperature change is valuable for water management. Such response may be complex and uncertain at the watershed scale and differences may exist between low and high latitudes. A simulation experiment was achieved by using SWAT modelling in the upstream watershed of Dongjiang River, South China. After calibration, the model was found appropriate for hydrological simulation in the study area and was run from 1995 to 2004 under a series of temperature change scenarios to reveal the response of streamflow and loads of sediment and nutrients. For a temperature increase of 3°C, streamflow, sediment and total phosphorus decreased by 5.2, 7.7 and 2.2%, respectively. Linear temperature change seemed to have a linear hydrological response. Nutrient deficiency was still the primary vegetation stress compared with water availability and temperature stress under rising temperatures. Comparison with previous research showed that two southern subtropical watersheds (one upstream and one downstream) gave different hydrological responses. Sediment and inorganic nitrogen loads decreased in the upstream watershed, but increased in the downstream one, when temperature increased. Under the warming scenarios, streamflow and sediment loads decreased throughout the year, especially during the wet season, which is different from results at high latitudes. Nutrient export decreased in April–June, but increased in the remaining months. Simulation results should be applied with caution in water resources management, as simulated climate change had variable hydrological influence in different regions and seasons.

Citation Xu, H. and Peng, S.L., 2013. Distinct effects of temperature change on discharge and non-point pollution in subtropical southern China by SWAT simulation. Hydrological Sciences Journal, 58 (5), 1032–1046.

Editor Z.W. Kundzewicz; Associate editor C.-Y. Xu     

Impacts of land-use and climate changes on surface runoff in a tropical forest watershed (Brazil)

ABSTRACT

Surface runoff generation capacity can be modified by land-use and climate changes. Annual runoff volumes have been evaluated in a small watershed of tropical forest (Brazil), using the Soil and Water Assessment Tool (SWAT) model. Firstly, the accuracy of SWAT in runoff predictions has been assessed by default input parameters and improved by automatic calibration, using 20-year observations. Then, the hydrological response under land uses (cropland, pasture and deforested soil) alternative to tropical forest and climate change scenarios has been simulated. SWAT application has showed that, if forest was replaced by crops or pasture, the watershed’s hydrological response would not significantly be affected. Conversely, a complete deforestation would slightly increase its runoff generation capacity. Under forecasted climate scenarios, the runoff generation capacity of the watershed will tend to decrease and will not be noticeably different among the representative concentration pathways. Pasture and bare soil will give the lowest and highest runoff coefficients, respectively.     

Assessing SWAT's performance in the Kaskaskia River watershed as influenced by the number of calibration stations used

The Future Midwestern Landscapes (FML) project is part of the U.S. Environmental Protection Agency's Ecosystem Services Research Program. The goal of the FML project is to quantify changes in ecosystem services across the Midwestern region as a result of the growing demand for biofuels. Watershed models are an efficient way to quantify ecosystem services of water quality and quantity. By calibrating models, we can better capture watershed characteristics before they are applied to make predictions. The Kaskaskia River watershed in Illinois was selected to investigate the effectiveness of different calibration strategies (single‐site and multi‐site calibrations) for streamflow, total suspended sediment (TSS) and total nitrogen (TN) loadings using the Soil and Water Assessment Tool. Four USGS gauges were evaluated in this study. Single‐site calibration was performed from a downstream site to an upstream site, and multi‐site calibration was performed and fine‐tuned based on the single‐site calibration results. Generally, simulated streamflow and TSS were not much affected by different calibration strategies. However, when single‐site calibration was performed at the most downstream site, the Nash–Sutcliffe efficiency (NSE) values for TN ranged between ?0.09 and 0.53 at the other sites; and when single‐site calibration was performed at the most upstream site, the NSE values ranged between ?8.38 and ?0.07 for the other sites. The NSE values for TN were improved to 0.5 – 0.59 for all four sites when multi‐site calibration was performed. The results of the multi‐site calibration and validation showed an improvement on model performance on TN and highlighted that multi‐site calibrations are needed to assess the hydrological and water quality processes at various spatial scales. Copyright © 2012 John Wiley & Sons, Ltd.     

Watershed modelling of hydrology and water quality in the Sacramento River watershed,California

Agricultural pollutant runoff is a major source of water contamination in California's Sacramento River watershed where 8500 km² of agricultural land influences water quality. The Soil and Water Assessment Tool (SWAT) hydrology, sediment, nitrate and pesticide transport components were assessed for the Sacramento River watershed. To represent flood conveyance in the area, the model was improved by implementing a flood routing algorithm. Sensitivity/uncertainty analyses and multi‐objective calibration were incorporated into the model application for predicting streamflow, sediment, nitrate and pesticides (chlorpyrifos and diazinon) at multiple watershed sites from 1992 to 2008. Most of the observed data were within the 95% uncertainty interval, indicating that the SWAT simulations were capturing the uncertainties that existed, such as model simplification, observed data errors and lack of agricultural management data. The monthly Nash–Sutcliffe coefficients at the watershed outlet ranged from 0.48 to 0.82, indicating that the model was able to successfully predict streamflow and agricultural pollutant transport after calibration. Predicted sediment loads were highly correlated to streamflow, whereas nitrate, chlorpyrifos and diazinon were moderately correlated to streamflow. This indicates that timing of agricultural management operations plays a role in agricultural pollutant runoff. Best management practices, such as pesticide use limits during wet seasons, could improve water quality in the Sacramento River watershed. The calibrated model establishes a modelling framework for further studies of hydrology, water quality and ecosystem protection in the study area. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparison of AnnAGNPS and SWAT model simulation results in USDA‐CEAP agricultural watersheds in south‐central Kansas

This study was conducted under the USDA‐Conservation Effects Assessment Project (CEAP) in the Cheney Lake watershed in south‐central Kansas. The Cheney Lake watershed has been identified as ‘impaired waters’ under Section 303(d) of the Federal Clean Water Act for sediments and total phosphorus. The USDA‐CEAP seeks to quantify environmental benefits of conservation programmes on water quality by monitoring and modelling. Two of the most widely used USDA watershed‐scale models are Annualized AGricultural Non‐Point Source (AnnAGNPS) and Soil and Water Assessment Tool (SWAT). The objectives of this study were to compare hydrology, sediment, and total phosphorus simulation results from AnnAGNPS and SWAT in separate calibration and validation watersheds. Models were calibrated in Red Rock Creek watershed and validated in Goose Creek watershed, both sub‐watersheds of the Cheney Lake watershed. Forty‐five months (January 1997 to September 2000) of monthly measured flow and water quality data were used to evaluate the two models. Both models generally provided from fair to very good correlation and model efficiency for simulating surface runoff and sediment yield during calibration and validation (correlation coefficient; R², from 0·50 to 0·89, Nash Sutcliffe efficiency index, E, from 0·47 to 0·73, root mean square error, RMSE, from 0·25 to 0·45 m³ s^?1 for flow, from 158 to 312 Mg for sediment yield). Total phosphorus predictions from calibration and validation of SWAT indicated good correlation and model efficiency (R² from 0·60 to 0·70, E from 0·63 to 0·68) while total phosphorus predictions from validation of AnnAGNPS were from unsatisfactory to very good (R² from 0·60 to 0·77, E from ? 2·38 to 0·32). The root mean square error–observations standard deviation ratio (RSR) was estimated as excellent (from 0·08 to 0·25) for the all model simulated parameters during the calibration and validation study. The percentage bias (PBIAS) of the model simulated parameters varied from unsatisfactory to excellent (from 128 to 3). This study determined SWAT to be the most appropriate model for this watershed based on calibration and validation results. Copyright © 2008 John Wiley & Sons, Ltd.