Sediment delivery processes and the spatial distribution of caesium-137 in a small Sicilian basin

The sediment delivery processes occurring in a small Sicilian basin are modelled using the spatially distributed SEDD model recently proposed by Ferro and Minacapilli. The model is applied by using soil data (grain-size distribution, organic matter content, etc.) of 129 samples uniformly distributed over the study area and compiling the available information (topographic map, soil data, etc.) into a Geographical Information System. Finally, the predictive capability of the distributed sediment delivery approach is tested experimentally using the caesium-137 measurement technique. The comparison between calculated sediment yield and the corresponding measured caesium-137 loss is used to validate the SEDD model at the scale of both the single morphological unit and the entire basin. © 1998 John Wiley & Sons, Ltd.     

Applying the bootstrap technique for studying soil redistribution by caesium-137 measurements at basin scale

Abstract

The use of the bootstrap technique to estimate the reference level of¹³⁷ Cs in an uneroded site is tested. The analysis is developed using ¹³⁷Cs measurements made in a small experimental Sicilian basin. In the reference area the ¹³⁷Cs activity is normally distributed with a known sample mean value, m equal to 94.4 mBq cm^?2. The influence of¹³⁷ Cs reference site sampling was determined generating samples having a fixed size, N and six different values of the sample coefficient of variation, CV, by a Monte Carlo technique. Then, for each size N, the probability distribution of the mean μ of the sequences generated by Monte Carlo technique is defined. The soil redistribution is determined, both at morphological unit and basin scale, using the proportional method of Martz & de Jong for calculating the net soil loss. The analysis showed that the spatial distribution of the net soil loss E _i, and the basin value E _b are independent of the sample size, N, and the coefficient of variation, CV, of the samples drawn from the reference area, if the bootstrap technique is applied for estimating the mean μ(μ) to use as reference value. The soil redistribution is also examined using as reference value the quantiles μ2.5, μ25, μ75, μ97.5 corresponding to a frequency F(μ) equal to 2.5, 25, 75 and 97.5%, respectively. In conclusion, the analysis established that a robust estimate of the reference value can be obtained even in fields where a small number of samples was drawn (high CV of the ¹³⁷Cs activity of the field samples), using the bootstrap technique for generating sequences of reference values having known mean value m (the mean value of the ¹³⁷Cs activity of the drawn field samples) and large sample size (N = 50).     

Developing a sediment budget for a small drainage basin in Australia

A sediment budget was developed for the 1.7 km² Maluna Creek drainage basin located in the Hunter Valley, New South Wales, Australia, for the period 1971-86. the impact of viticulture, which commenced at Maluna in 1971, was studied using erosion plots, with caesium-137 as an indicator of both soil erosion and sedimentation. Two methods were used to estimate vineyard soil losses from caesium-137 measurements. Sediment output from the catchment was measured for three years, and extrapolated from readings taken at a nearby long-term stream flow gauging station for the remaining 13 years. Relative amounts of soil loss from forest (60 per cent basin area), grazing land (30 per cent) and vineyards (10 per cent) were calculated. Soil losses by rain splash detachment were ten times greater from bare/cultivated sufaces than from the forest. Erosion plots of area 2 m² showed no significant differences in soil loss between forest and grassland but, under bare soil, losses were 100 times greater. the ¹³⁷Cs method was employed to calculate net soil loss from all vineyard blocks using both a previously established calibration curve and a proportional model. the latter method gave estimates of soil loss which were 3-9 times greater than by the calibration curve, and indicated that average soil losses from the vineyard were equivalent to 62 t ha^?1 y^?1 (1971-86). It was estimated that the forest contributed 1-8 per cent, the grazing land 1.6 per cent, and the vineyard 96.6 per cent of the total soil loss during that period. Sediment storages within the fluvial system adjacent to the vineyard ws 9460 t for the period, whereas sediment output was equivalent to 215 t km^?1 y^?1. Independent measurements of soil erosion, storage, and output showed that 56 per cent of the eroded sediment remained in the catchment, and 34 per cent was transported out by Maluna Creek. the budget was able to be balanced to within 10 per cent.     

A process‐based conversion model for caesium‐137 derived erosion rates on agricultural land: an integrated spatial approach

There is increasing recognition that ¹³⁷Cs data remain one of the few sources of spatially distributed information concerning soil erosion. However, many of the conversion models that have been used to convert ¹³⁷Cs data into soil redistribution rates failed to account for some of the key factors affecting the redistribution of ¹³⁷Cs in agricultural landscapes. The conversion model presented in this paper aims to overcome some of the limitations associated with existing models and therefore to provide more realistic estimates of soil erosion rates on agricultural land. The conversion model aims at coupling soil redistribution processes directly with ¹³⁷Cs redistribution. Emphasis is placed on the spatial representation of soil redistribution processes and the adequate simulation of tillage processes. The benefits of the presented model arise from the two‐dimensional spatial integration of mass balance models with soil erosion models. No a priori assumptions about the intensity of any soil redistribution process are necessary and the level of agreement between observed and simulated ¹³⁷Cs inventories enables us to evaluate the performance of the model. The spatial implementation and the use of fuzzy parameter sets also allow us to assess the uncertainties associated with soil erosion estimates. It was shown that an adequate simulation of tillage processes is necessary and that simplified tillage models may lead to erroneous estimates of soil redistribution. The model was successfully applied to a study site in the Belgian Loam Belt and the results indicated that tillage is the dominant process. Furthermore, the uncertainties associated with the estimation of water erosion rates were much higher than those associated with tillage, especially for depositional areas. Copyright © 2003 John Wiley & Sons, Ltd.     

Sediment delivery processes and chemical transport in a small forested basin/Processus de production sédimentaire et transport chimique dans un petit bassin versant forestier

Abstract

Because the properties of eroded soil affect the deposition phenomena and transport capacity of chemical materials by eroded particles, recent research is trying to link the grain-size distribution of the eroded sediment to that of the original soil in order to explain the enrichment of chemical content of the sediment with the respect to the parent soil. In this study, the spatial distribution of nitrogen, phosphorus and total organic carbon was firstly deduced using the measurements carried out in 47 soil samples distributed over a forested basin together with a kriging interpolation method. Then the load of each chemical was calculated at morphological unit and basin scales using the above-mentioned spatial distributions and sediment yield values calculated by the SEDD (SEdiment Delivery Distributed) model, which couples the universal soil loss equation with a spatial disaggregation criterion of sediment delivery processes. Finally, at basin scale, a new expression of the enrichment ratio of a given chemical was applied.     

Modelling particle residence times in agricultural river basins using a sediment budget model and fallout radionuclide tracers

Contemporary patterns in river basin sediment dynamics have been widely investigated but the timescales associated with current sediment delivery processes have received much less attention. Furthermore, no studies have quantified the effect of recent land use change on the residence or travel times of sediment transported through river basins. Such information is crucial for understanding contemporary river basin function and responses to natural and anthropogenic disturbances or management interventions. To address this need, we adopt a process‐based modelling approach to quantify changes in spatial patterns and residence times of suspended sediment in response to recent agricultural land cover change. The sediment budget model SedNet was coupled with a mass balance model of particle residence times based on atmospheric and fluvial fluxes of three fallout radionuclide tracers (⁷Be, excess ²¹⁰Pb and ¹³⁷Cs). Mean annual fluxes of suspended sediment were simulated in seven river basins (38–920 km²) in south‐west England for three land cover surveys (1990, 2000 and 2007). Suspended sediment flux increased across the basins from 0.5–15 to 1.4–37 kt y^‐1 in response to increasing arable land area between consecutive surveys. The residence time model divided basins into slow (upper surface soil) and rapid (river channel and connected hillslope sediment source area) transport compartments. Estimated theoretical residence times in the slow compartment decreased from 13–48 to 5.6–14 ky with the increase in basin sediment exports. In contrast, the short residence times for the rapid compartment increased from 185–256 to 260–368 d as the modelled connected source area expanded with increasing sediment supply from more arable land. The increase in sediment residence time was considered to correspond to longer sediment travel distances linked to larger connected source areas. This novel coupled modelling approach provides unique insight into river basin responses to recent environmental change not otherwise available from conventional measurement techniques. © 2014 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Hydrological Sciences Journal Countents 1994

Abstract

Since eroded sediments are produced from different sources distributed throughout a basin, sediment delivery processes at basin scale have to be modelled by a spatially distributed approach. In this paper a new theoretically based relationship is proposed for evaluating the sediment delivery ratio, SDR_i, of each morphological unit, i, into which a basin is divided. Then, using the sediment balance equation written for the basin outlet, a relationship between the basin sediment delivery ratio, SDR_W and the SDR_i is deduced. This relationship is shown to be independent of the soil erosion model used. Finally, a morphological criterion for estimating a coefficient, β, is proposed.     

ESTIMATION OF SOIL EROSION IN A RESERVOIR WATERSHED USING ^137CS FALLOUT RADIONUCLIDE

Sedimentation from soil erosion is a critical reservoir watershed management issue. Due to the difficulty of field investigations, empirical formulas are commonly used to estimate the soil erosion rate. However, these estimations are often far from accurate. An effective alternative to estimating soil erosion is to analyze the spatial variation of 137Cs inventory in the soil. 137Cs can be adsorbed by the soil and is widely assumed to change its distribution only when disturbed by rainfall and human activities. Thus, 137Cs distributed in soils can be a useful environmental tracer to estimate soil erosion. In this study, the net soil loss estimate is 108,346 t/yr and the gross erosion and net erosion rates are 10.1 and 9 t/ha yr respectively. The sediment delivery ratio is therefore estimated to be 0.9 based on the two erosion rates. Because of the steep hillsides in the watershed, only 10% of the sediment yield stayed in the deposition sites and 90% was transported to the river as the sediment output. Soil erosion estimates from spatial variations of the 137Cs activity in the Baishi river watershed showed satisfactory accuracy when compared to sediment yield data. Using soil 137Cs concentrations is therefore a feasible method for estimating soil loss or deposition in Taiwan. Data sampling, analysis and result of this approach are given in this paper.     

Estimation of suspended sediment sources using 137Cs and 210Pbex in unmanaged Japanese cypress plantation watersheds in southern Japan

To analyse suspended sediment sources in unmanaged Japanese cypress plantation watersheds, field measurements and fingerprinting of the suspended sediment was conducted in the Shimanto River basin in southern Japan. For sediment fingerprinting, ¹³⁷Cs and ²¹⁰Pb_ex were detected by means of gamma‐ray spectrometry in the surface soil of the forest floor, stream bank and truck trail and mobilized sediment by interrill erosion. The ¹³⁷Cs and ²¹⁰Pb_ex activities associated with the forest floor materials were considerably higher than those of the stream bank and truck trail. The ¹³⁷Cs and ²¹⁰Pb_ex activities associated with the suspended sediment were found to vary with the sampling period. Evidently, the suspended sediment can comprise materials generated from the forest floor by interrill erosion and those from the truck trail and/or stream bank. The multivariate sediment‐mixing model using ¹³⁷Cs and ²¹⁰Pb_ex showed that the contribution of the forest floor varied periodically, ranging from 23–56% in the Hinoki 156 subwatershed and from 18–85% in the Hinoki 155 subwatershed. The difference in the average contribution of the forest floor between Hinoki 156 (46%) and Hinoki 155 (69%) may relate to the presence of truck trail networks in the watershed. The truck trail network can play roles of sediment source and pathway for sediment from forest floor to stream channel due to the concentrated overland flow on the truck trail during heavy rainfall events. These results indicate that the forest floor should be recognized as a major source of suspended sediment in unmanaged Japanese cypress plantation watersheds. Copyright © 2008 John Wiley & Sons, Ltd.     

The use of caesium‐137 to estimate agricultural erosion on steep slopes in a tropical watershed

The estimation of erosion and sediment delivery rates in tropical mountain watersheds is difficult and most of the methods widely used for estimating soil erosion over large areas have serious limitations. The ¹³⁷Cs approach has potential for quantifying soil erosion because it can provide retrospective estimates of long‐term (since 1963) net sediment redistribution relatively quickly. Despite its great potential, ¹³⁷Cs has not yet been used in an extensive, reconnaissance level survey of erosion in complex tropical mountain environments. The objective of this study was to examine the applicability of the ¹³⁷Cs method to estimate erosion on steep tropical agricultural lands (23 to 80% slopes) in the Nizao watershed, a humid, tropical mountain area of the Dominican Republic. In this study we (i) examine the variation of ¹³⁷Cs in ten reference sites—eight coffee groves and two forested sites—and (ii) estimate erosion from 14 cultivated fields. The soil pool of ¹³⁷Cs ranged from to 150 to 192 mBq cm⁻² on reference sites with minimal erosion. Variability among reference sites was less than expected for such complex mountain terrain. The variability within coffee and forested reference (average CV=28%) sites was similar to the variability found on grassland and forested reference sites in the temperate zone. The estimated annual soil loss from 14 sampled fields ranged from 6 to 61 t ha⁻¹ year⁻¹ with an overall mean of 26 t ha⁻¹ year⁻¹. Overall, the soil erosion estimates found using the ¹³⁷Cs method were much lower than those often assumed for such steep tropical hillsides. These erosion estimates account for soil loss since 1963 only and it seems likely that soil losses may have been much higher in earlier decades immediately after initial forest clearing earlier in the 20th century. Copyright © 2000 John Wiley & Sons, Ltd.     

Landscape‐scale controls on the spatial distribution of caesium 137: A study based on an airborne geophysical survey across Northern Ireland

The spatial distribution of ¹³⁷Cs across the landscape and the processes controlling its redistribution are of interest because (i) ¹³⁷Cs has been widely used to quantify the movement of soil and sediments and (ii) substantial fallout of ¹³⁷Cs after the Chernobyl accident has led to contamination of foodstuffs in some places. A high‐resolution airborne geophysical radiometric survey of Northern Ireland has provided an opportunity to study the distribution and possible redistribution of ¹³⁷Cs. The ¹³⁷Cs activity (recorded at 1·2 million points) is distributed in a series of bands oriented approximately 160° and 115° clockwise from north. Geostatistical analysis of the data shows a strong, short‐range structure (correlation ranges between 0·6 and 8 km) in ¹³⁷Cs activity across the vast majority of the region; the spatial distribution shows association with a published, coarse‐scale depositional pattern of ¹³⁷Cs from Chernobyl. Two indices of land form derived from a digital elevation model, namely compound topographic index and the length–slope factor of the Revised Universal Soil Loss Equation, account for only 3% of the variance in ¹³⁷Cs activity. In contrast, soil type and land cover in combination (including their interaction) account for 20% of the variance. In areas that received moderate fallout from Chernobyl, soil type alone accounts for a substantial proportion of the spatially correlated ¹³⁷Cs activity. We attribute this to each soil type having a fairly uniform radiocaesium interception potential that differs from those of other soil types and that this potential controls the vertical migration of ¹³⁷Cs. Over the granitic Mourne Mountains there is a strong spatial cross‐correlation between ¹³⁷Cs activity and airborne estimates of soil potassium, suggesting that the latter provides a measure of the soil's radiocaesium interception potential; this is probably dominated by the quantity of the mineral illite. Copyright © 2010 John Wiley & Sons, Ltd. and British Geological Survey     

Estimation of soil erosion in the Xihanshui River Basin by using 137Cs technique

The Cesium-137 technique was used to estimate soil erosion in the Xihanshui River Basin.More than 100 samples were taken from 10 sites and 20 hillslopes with a 10cm diameter hand-operated core driller.Each sample was 60 cm long.The ¹³⁷Cs activity was analyzed by gamma spectrometry.The simplified mass balance model and the profile distribution model were used to calculate soil erosion and deposition rate.The local ¹³⁷Cs reference ranged from 1,600 to 2,402 Bq m^-2.The data shows an exponential decrease of mass concentration and amount with depth in an undisturbed soil profile.Soil erosion in the river basin is moderate or severe on cultivated land with annual erosion rates of 2,000-6,000 t km^-2yr^-1.In general,very severe or severe soil erosion occurred at the upper slope sections,moderate or severe soil erosion at the middle section,and moderate or slight soil erosion at the lower slope sections.On the slopes with natural vegetation,consisting of herbaceous and wood species,the erosion rate is much lower or not detectable.On the lower section of slopes with well-developed vegetation however,there was no soil loss,instead deposition occurred at a rate of more than 300 t km^-2 yr^-1.The slope gradient and vegetation cover affected soil erosion and deposition rates.In general,the rate of soil erosion was proportional to the slope gradient and inversely proportional to the degree of vegetative cover.     

Use of fallout tracers 7Be, 210Pb and 137Cs to distinguish the form of sub‐surface soil erosion delivering sediment to rivers in large catchments

Fallout radionuclides (FRNs) ¹³⁷Cs and ²¹⁰Pb are well established as tracers of surface and sub‐surface soil erosion contributing sediment to river systems. However, without additional information, it has not been possible to distinguish sub‐surface soil erosion sources. Here, we use the FRN ⁷Be (half‐life 53 days) in combination with ¹³⁷Cs and excess ²¹⁰Pb to trace the form of erosion contributing sediment in three large river catchments in eastern Australia; the Logan River (area 3700 km²), Bowen River (9400 km²) and Mitchell River (4700 km²). We show that the combination of ¹³⁷Cs, excess ²¹⁰Pb and ⁷Be can discriminate horizontally aligned sub‐surface erosion sources (rilled and scalded hillslopes and the floors of incised drainage lines and gully ‘badland’ areas) from vertical erosion sources (channel banks and gully walls). Specifically, sub‐surface sources of sediment eroded during high rainfall and high river flow events have been distinguished by the ability of rainfall‐derived ⁷Be to label horizontal soil surfaces, but not vertical. Our results indicate that in the two northern catchments, erosion of horizontal sub‐surface soil sources contributed almost as much fine river sediment as vertical channel banks, and several times the contribution of hillslope topsoils. This result improves on source discrimination provided previously and indicates that in some areas erosion of hillslope soils may contribute significantly to sediment yield, but not as topsoil loss. We find that in north‐eastern Australia, scalded areas on hillslopes and incising drainage lines may be sediment sources of comparable importance to vertical channel banks. Previous studies have used the combination of ¹³⁷Cs, excess ²¹⁰Pb and ⁷Be to estimate soils losses at the hillslope scale. Here, we show that with timely and judicious sampling of soil and sediment during and immediately after high flow events ⁷Be measurements can augment fallout ¹³⁷Cs and ²¹⁰Pb to provide important erosion source information over large catchments. Copyright © 2013 John Wiley & Sons, Ltd.     

Quantifying sheet wash erosion rates in a mountainous semi‐arid basin using environmental radionuclides and a stream power model

Erosion rates and processes define how mountainous landscapes evolve. This study determines the range of erosion rates in a semi‐arid landscape over decadal time spans and defines the dominant processes controlling variability in erosion rates. The varying topography and climatic regimes of the Xiying Basin (Qilian Shan Mountains, China) enables us to examine the relative roles of sheet wash versus rainsplash and the influence of vegetation on soil erosion and deposition. Soil erosion rates since 1954 were determined using ¹³⁷Cs along 21 transects at four sites with varying gradient, rainfall, and vegetation cover. The mean ¹³⁷Cs derived soil erosion rate ~0.42 mm/a was consistent with the catchment level erosion rate derived from total sediment yield for a 44 year record. However, there is considerable variability in ¹³⁷Cs erosion rates both between transects and along transects, perhaps reflecting variation not only in the effectiveness of individual processes but also in their relative roles. We compare the ¹³⁷Cs‐derived erosion rates with 1‐D models for sediment flux that incorporate sheet wash and rainsplash processes, testing them over a previously untested 60 year timescale. The variability in ¹³⁷Cs erosion rates along transects is best replicated by sheet wash dominated simulations, suggesting that this is the dominant erosion process in this semi‐arid landscape. The functional form of the sheetwash model can also explain our observations that ¹³⁷Cs erosion rates decrease with upslope length (i.e. distance down slope) while its variability increases. However, sparsely vegetated sites, located in slightly drier locations, have higher erosion rates, and are not as accurately modeled as densely vegetated sites, suggesting that patchiness of vegetation introduces fine scale variability in erosion rates on these slopes. Copyright © 2015 John Wiley & Sons, Ltd.     

Intercomparison across scales between remotely-sensed land surface temperature and representative equilibrium temperature from a distributed energy water balance model

Abstract

Quantifying the reliability of distributed hydrological models is an important task in hydrology to understand their ability to estimate energy and water fluxes at the agricultural district scale as well the basin scale for water resources management in drought monitoring and flood forecasting. In this context, the paper presents an intercomparison of simulated representative equilibrium temperature (RET) derived from a distributed energy water balance model and remotely-sensed land surface temperature (LST) at spatial scales from the agricultural field to the river basin. The main objective of the study is to evaluate the use of LST retrieved from operational remote sensing data at different spatial and temporal resolutions for the internal validation of a distributed hydrological model to control its mass balance accuracy as a complementary method to traditional calibration with discharge measurements at control river cross-sections. Modelled and observed LST from different radiometric sensors located on the ground surface, on an aeroplane and a satellite are compared for a maize field in Landriano (Italy), the agricultural district of Barrax (Spain) and the Upper Po River basin (Italy). A good ability of the model in reproducing the observed LST values in terms of mean bias error, root mean square error, relative error and Nash-Sutcliffe index is shown.

Editor Z.W. Kundzewicz; Associate editor D. Gerten     

Modelling spatio-temporal patterns of sediment yield and connectivity in a semi-arid catchment with the WASA-SED model

Abstract

Rainfall–runoff induced soil erosion causes important environmental degradation by reducing soil fertility and impacting on water availability as a consequence of sediment deposition in surface reservoirs used for water supply, particularly in semi-arid areas. However, erosion models developed on experimental plots cannot be directly applied to estimate sediment yield at the catchment scale, since sediment redistribution is also controlled by the transport conditions along the landscape. In particular, representation of landscape connectivity relating to sediment transfer from upslope areas to the river network is required. In this study, the WASA-SED model is used to assess the spatial and temporal patterns of water and sediment connectivity for a semi-arid meso-scale catchment (933 km²) in Brazil. It is shown how spatial and temporal patterns of sediment connectivity within the catchment change as a function of landscape and event characteristics. This explains the nonlinear catchment response in terms of sediment yield at the outlet.

Citation Medeiros, P. H. A., Güntner, A., Francke, T., Mamede, G. L. & de Araújo, J. C. (2010) Modelling spatio-temporal patterns of sediment yield and connectivity in a semi-arid catchment with the WASA-SED model. Hydrol. Sci. J. 55(4), 636–648.     

THE RELATIVE CONTRIBUTION OF SOIL TILLAGE AND OVERLAND FLOW EROSION TO SOIL REDISTRIBUTION ON AGRICULTURAL LAND

This study uses evidence for the long-term (35 years) pattern of soil redistribution within two agricultural fields in the UK to identify the relative importance of tillage and overland flow erosion. Spatially distributed long-term total soil redistribution data for the fields (Dalicott Farm and Rufford Forest Farm) were obtained using the caesium-137 (¹³⁷Cs) technique. These data were compared with predicted patterns of soil redistribution. Recent studies have demonstrated that the redistribution of soil by tillage may be described as a diffusive process. A two-component model was, therefore, developed which accounts for soil redistribution by both overland flow and diffusive processes. Comparison of the predicted patterns of overland flow erosion alone with the observed (¹³⁷Cs-derived) data indicated a poor agreement (r² = 0.17 and 0.11). In contrast, a good agreement exists between the predicted pattern of diffusive redistribution and the observed data (r² = 0.43 and 0.41). These results give a clear indication that diffusive processes are dominant in soil redistribution within these fields. Possible diffusive processes include splash erosion, soil creep and tillage. However, the magnitude of the diffusion coefficients for the optimum predicted pattern (c. 350–400 kg m⁻¹ a⁻¹) demonstrates that tillage is the only process capable of explaining the very significant soil redistribution which is indicated by the ¹³⁷Cs data. Consideration is given to the implications of these results for both soil erosion prediction and landscape interpretation.     

Can channel banks be the dominant source of fine sediment in a UK river?: an example using 137Cs to interpret sediment yield and sediment source

Cultivated fields have been shown to be the dominant sources of sediment in almost all investigated UK catchments, typically contributing 85 to 95% of sediment inputs. As a result, most catchment management strategies are directed towards mitigating these sediment inputs. However, in many regions of the UK such as the Nene basin there is a paucity of sediment provenance data. This study used the caesium‐137 (¹³⁷Cs) inventories of lake and floodplain cores as well as the ¹³⁷Cs activities of present day sediment to determine sediment provenance. Sediment yields were also reconstructed in a small lake catchment. Low ¹³⁷Cs inventories were present in the lake and floodplain cores in comparison to the reference inventory and inventories in cores from other UK catchments. Caesium‐137 activities in the present day sediments were low; falling close to those found in the channel bank catchment samples. It was estimated that 60 to 100% of the sediment in the Nene originated from channel banks. Pre‐1963 sediment yields were approximately 11.2 t km^?2 yr^?1 and post‐1963 was approximately 11.9 t km^?2 yr^?1. The lack of increased sediment yield post‐1963 and low sediment yield is unusual for a UK catchment (where a yield of 28 to 51 t km^?2 yr^?1 is typical for a lowland agricultural catchment), but is explained by the low predicted contribution of sediment from agricultural topsoils. The high channel bank contribution is likely caused by the river being starved of sediment from topsoils, increasing its capacity to entrain bank material. The good agreement between the results derived using cores and recently transported sediments, highlight the reliability of ¹³⁷Cs when tracing sediment sources. However, care should be taken to assess the potential impacts of sediment particle size, sediment focusing in lakes and the possible remobilization of ¹³⁷Cs from sedimentary deposits. Copyright © 2016 John Wiley & Sons, Ltd.     

Assessment of sediment yield in a small karst catchment by using 137Cs tracer technique

There is very thin soil layer in karst rocky desertification areas in Southwest China,sediment deposition and sediment yield in the karst area affects the development of vegetation greatly.In the present study,the ¹³⁷Cs technique was used to assess the rate of sediment deposition and sediment yield in a small karst catchment.The ¹³⁷Cs inventory within the depression varied between 800 m^-2 and 2,200 Bq m^-2,with the mean value of 1,500.1 Bq m^-2.The ¹³⁷Cs reference inventory at a nearby reference site was 805.9 Bq m^-2.It could be inferred to that sediment deposition had occurred in the catchment.The mean depth of sediments deposition in the depression was 6 cm and the deposition rate was approximately 0.13 cm yr^-1.The analysis of the topographic characteristics of the catchment revealed that the sediment deposition occurred mainly at the lower part of the small catchment.Although,there was a sinkhole in the depression,little sediment had drained out with runoff through the sinkhole,because the local people built ridges around the sinkholes for storing water.According to this,sediment yield rate in the small catchment was estimated to be approximately 19.25 to 27.5 t km^-2 yr^-1,and the extremely low sediment yield was maybe the main obstacle to vegetation restoration in karst rocky desertification areas.     

Evaluation of the SEDD model for predicting sediment yield at the Sicilian experimental SPA2 basin

In this paper a spatially distributed model of the hillslope sediment delivery processes, named the sediment delivery distributed (SEDD) model, is initially reviewed; the model takes into account the sediment delivery processes due to both the hillslope sediment transport and the effects of slope curvature. Then the rainfall and sediment yield events measured at the experimental SPA2 basin, in Sicily, are used both to calibrate the SEDD model and to verify the predictive capability of the distributed sediment delivery approach at event scale. For the SPA2 basin discretized into morphological units and stream tubes, the SEDD model is calibrated at event scale using the measurements carried out at the outlet of the experimental basin in the period December 2000–January 2001. The model calibration is used to determine a relationship useful for estimating the unique coefficient β_e of the model by rainfall erosivity factor R_e at event scale. To test the predictive capability of the β_e = f(R_e) relationship, 20 events measured in the period September 2002–December 2005 are used; the comparison between measured sediment yield values and calculated ones for all monitored events shows that the sediment delivery distributed approach has a good predictive ability at event scale. The analysis also shows that estimating β_e by the relationship β_e = f(R_e) gives a better agreement between measured and calculated sediment yields than obtained with the median value β_e,m of all 27 calculated β_e values. Finally the analysis at annual scale, for the period 2000–2005, allows the estimation of the median value β_a,m representative of the annual behaviour. This analysis shows that the sediment delivery distributed approach also has a good predictive ability at annual scale. Copyright © 2006 John Wiley & Sons, Ltd.