首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到13条相似文献,搜索用时 15 毫秒
1.
自升式钻井船基础刺穿分析方法在渤海石油开发区的应用   总被引:3,自引:0,他引:3  
自升式钻井升船作业时,桩脚基础遇到砂-粘层状地基,即存在潜在刺穿的危险。基础刺穿的发生,会严重影响钻井船的安全作业,本文拟通过分析目前常用刺穿分析方法在渤海石油开发区的应用情况及土质参数的选取问题,找出适合渤海石油开发区土质特性的刺穿分析方法,以避免发生危险。  相似文献   

2.
The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.  相似文献   

3.
对桶形基础平台负压沉贯过程中汲水泵机进行了初步水力分析,讨论了不同水深、不同泵机安装高度情况下,桶腔和泵机进口之间的压头关系.这些结果可作为实际工作中选择泵机类型及其安装高度的参考.  相似文献   

4.
对单片机传送的传感器数据进行处理 ,先实现对传感器运行状态的判断 ,以此为依据选择正常状态的传感器数据 ,对桶基沉贯过程进行智能控制 ,同时通过动态曲线、桶基三维姿态显示屏幕观察桶基沉贯状态。  相似文献   

5.
郑敬宾  胡畔  王栋 《海洋工程》2018,36(3):123-130
由于复杂海洋工程地质条件的普遍性,自升式平台在安装过程中穿刺事故频发,近年来涌现出大量针对自升式平台桩靴基础在复杂土层中穿刺预测方法的研究。为了方便工程设计人员的理解和使用,首先简单介绍这些研究中所采用的技术手段,总结现行规范ISO 19905-1建议的桩靴在复杂土层中贯入阻力的预测方法以及最新文献中提出的新的设计方法,并对规范方法和新方法的优缺点进行了评价。所总结的设计方法针对国内外常见的含穿刺风险的海洋地基形式,包括双层"砂—黏"、三层"硬—软—硬"黏性土、三层"软—硬—软"黏性土、三层"黏—砂—黏"地层以及四层"黏—砂—黏—硬层土"地层。通过对离心机模型试验的预测,对规范方法和新方法的预测精度进行了比较,对比结果显示新方法对桩靴穿刺破坏的预测更为合理精确。  相似文献   

6.
随着碎石土强夯地基的推广应用,解决如何对其进行快速有效地检测,提供其准确的强度及变形参数问题,具有重要的经济及安全意义。提出了一种利用平板静力载荷试验、动力触探、地基动刚度测试三种基本手段,建立相关数学模型,主要应用后两种手段进行联合检测的新思路。并将相关数学模型以经验公式的形式进行了总结,对碎石土强夯地基的检测具有指导意义。  相似文献   

7.
A concept design, named integrated suction foundation, is proposed for a tension leg platform (TLP) in deep ocean. The most important improvement in comparing with the traditional one is that a pressure-resistant storage module is designed. It utilizes the high hydrostatic pressure in deep ocean to drive water into the module to generate negative pressure for bucket suction. This work aims to further approve the feasibility of the concept design in the aspect of penetration installation and the uplift force in-place. Seepage is generated during suction penetration, and can have both positive and negative effects on penetration process. To study the effect of seepage on the penetration process of the integrated suction foundation, finite element analysis (FEA) is carried out in this work. In particular, an improved methodology to calculate the penetration resistance is proposed for the integrated suction foundation with respect to the reduction factor of penetration resistance. The maximum allowable negative pressure during suction penetration is calculated with the critical hydraulic gradient method through FEA. The simulation results of the penetration process show that the integrated suction foundation can be installed safely. Moreover, the uplift resistance of the integrated suction foundation is calculated and the feasibility of the integrated suction foundation working on-site is verified. In all, the analysis in this work further approves the feasibility of the integrated suction foundation for TLPs in deep ocean applications.  相似文献   

8.
自升式平台桩脚在含硬壳层地基中的插深分析   总被引:1,自引:0,他引:1  
存在硬壳层的层状地基承载能力分析是自升式钻井平台桩脚插深分析的关键,但是目前对硬壳层承载能力的确定还没有成熟可行的理论计算方法。一般的针对非均质层状地基的承载力计算方法,因参数较多,计算步骤繁琐,很难广泛应用于实际的平台桩脚入泥深度分析中。文中主要介绍了存在硬壳层的层状地基承载力的分析方法与过程,根据应力扩散原理推导并做适当的简化得到硬壳层承载力修正方法。简化后的修正方法能满足一般硬壳层承载力分析的需要,并使平台插桩深度分析计算过程变得简便。通过在实际工程的应用,得到的实测结果与理论计算值也较为一致,说明了用此方法分析硬壳层地基的平台插桩是合理、实用的。  相似文献   

9.
—The offshore platform with bucket foundations is a new type of offshore platform that distin-guishes from traditional template platforms by replacing driven piles with bucket foundations.The suctionpenentration of bucket foundation is a complicated hydro-dynamic process.The key of this process is theseepage field caused by the difference of pressure applied on purpose inside and outside the bucket.The ap-pearance and developement of seepage field has a decisive influence on the suction penetration process.Inthis study,the finite element analysis method is applied to the dynamic simulation of the seepage field ofsuction penetration of bucket foundation.A criterion is suggested to distinguish the hydro-dynamic stabili-ty of the soil inside the bucket according to the critical hydraulic gradient method.The reliability of themodel and its applicability to engineering practice have been proved through comparison between the re-sults of model test and finite element calculation.  相似文献   

10.
承受水平荷载作用的桩基,规范中常采用m法进行桩基水平承载力的计算,地基土水平地基抗力系数的比例系数m值在规范中根据地基土的状态、类别以表格给出。在地基勘察中,现在广泛采用静力触探试验。直接利用静力触探数据给出比例系数m值。将使桩基设计所用参数更加直接准确。本文利用天津地区地层大量静力触探资料与地基土状态数据,利用统计分析回归方法,总结出地基土的液性指数IL与静力触探参数锥尖阻力qc及摩阻比Rf间的关系式,针对天津的地层土体,给出利用静力触探资料查用m值的表格,为桩基的设计计算提供资料。  相似文献   

11.
某港口堆场地基上部5.0m系吹填而成,地表下18m范围均属软土,经真空预压初级加固后地基承载力仅在80—90kPa,局部区域上部淤泥土层土性指标较差,含水量大于50%,地基承载力不足60kPa。为了使地基达到230kPa的承载要求,设计采用深层搅拌法加固超软弱地基。通过现场成桩工艺试验和检测表明,桩身水泥土强度在90d龄期时大于1.80MPa,单桩承载力标准值大于150kN,以φ600桩径、桩长13.5m、置换率为0.308和φ500桩径、桩长13.5m、置换率为0.267两种方案布置的复合地基承载力标准值均超过了230kPa的设计要求。试验结果表明,深层搅拌法在港口超软弱地基土应用只要施工工艺适当,完全可以使地基承载力提高2—3.5倍以土,从而节省大量的工程投资。  相似文献   

12.
在阅读、分析以往的有关资料的基础上 ,结合实际的试验条件 ,对桶形基础及其作用下的粉质土海床失稳机制研究的试验作出了专门设计。该设计通过配土、设计模型桶基和负压沉贯的操作过程、设置孔压传感器等实验手段 ,努力从土体破坏的角度 ,寻求负压沉贯过程中沉贯负压、沉贯阻力及孔隙水压力之间的变化关系和确定桶基的上拔力。并且指出了数据处理的基本思路 ,以利于课题的深入研究。  相似文献   

13.
筒型基础沉放施工中,随着入土深度的增加,筒体所受的侧摩阻力越大,当达到一定程度时,将导致基础无法继续下沉.为了避免这种情况的发生,在实际的施工中可以在锚体上设置剪土环以减小侧摩阻力的影响.论文针对海上吸力锚基础这一新型海洋平台基础形式研究中面临的吸力锚负压沉贯下沉中设置剪土环及剪土环对其渗流场的影响这一问题,通过对吸力锚渗流场的有限元分析,运用有限元软件ANSYS对锚体周围土体渗流场进行建模分析,利用有限元计算的结果来分析剪土环对渗流场的影响.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号