Localized velocity anomalies in the lower mantle

Summary. Two localized regions of velocity heterogeneity in the lower mantle with scale lengths of 1000–2000 km and 2 per cent velocity contrasts are detected and isolated through comparison of S, ScS, P and PcP travel times and amplitudes from deep earthquakes in Peru, Bolivia, Argentina and the Sea of Okhotsk. Comparison of the relative patterns of ScS-S differential travel times and S travel-time residuals across North American WWSSN and CSN stations for the different source regions provides baselines for interpreting which phases have anomalous times. A region of low S and P velocities is located beneath Northern Brazil and Venezuela at depths of 1700–2700 km. This region produces S -wave delays of up to 4 s for signals from deep Argentine events recorded at eastern North American stations. The localized nature of the anomaly is indicated by the narrow bounds in azimuth (15°) and take-off angle (13°) of the arrivals affected by it. The long period S -waves encountering this anomaly generally show 30–100 per cent amplitude enhancement, while the short-period amplitudes show no obvious effect. The second anomaly is a high-velocity region beneath the Caribbean originally detected by Jordan and Lynn, who used travel times from deep Peruvian events. The data from Argentine and Bolivian events presented here constrain the location of the anomaly quite well, and indicate a possible short- and long-period S -wave amplitude diminution associated with it. When the travel-time data are corrected for the estimated effects of these two anomalies, a systematic regional variation in ScS-S station residuals is apparent between stations east of and west of the Rocky Mountains. One possible explanation of this is a long wavelength lateral variation in the shear velocity structure of the lower mantle at depths greater than 2000 km beneath North America.     

Seismotectonics and analysis of earthquakes from the Hindukush region

Summary. Over 80 earthquakes, exclusively from the Hindukush focal region, which were recorded at the Gauribidanur seismic array (GBA) have been used in this study. These events have similar epicentral distances and a narrow azimuthal range from GBA but varying focal depths from 10 to 240 km. A fault plane dipping steeply (75°) in the north-west direction and striking N 66° E has been investigated on the basis of the spatial distribution of earthquakes in two vertical planes through 68° E and 32° N. Short period P -wave recordings up to 30 s were processed using the adaptive cross-correlation filtering technique. Slowness and azimuthal anomalies were obtained for first arrivals. These anomalies show positive as well as negative bias and are attributed to a steep velocity gradient in the upper mantle between the 400–700 km depth range where the seismic rays have their maximum penetration. Relative time residuals between the stations of GBA owe their origin very near to the surface beneath the array. A search of the signals across the array revealed that most of the events occurring at shallower depths had complex signatures as compared to the deeper events. The structure near the source region, complicated source functions and the scattering confined to the crust—upper mantle near source are mainly responsible for the complexity of the Hindukush earthquakes as the transmission zone of the ray tubes from turning point to the recording station is practically the same.     

P and S beyond 95°

Summary. Data for P and S beyond 85° are used for earthquakes in the four epicentral regions that travel times have been found for (Japan, Europe, Central and South Pacific). They seem to disagree seriously with suggestions of a considerable change in the times and dt/dΔ for S from the Jeffreys—Bullen tables of 1939–40. There are signs of a sharp drop in dt/dΔ for both Pand S in the range 93–95° except for the Southern Pacific.     

Anomalous high-frequency wave propagation from the Tonga–Kermadec seismic zone to New Zealand

Summary. Bulletins of the International Seismological Centre (ISC) show very large residuals, up to 15 s early, for arrivals from events in the Tonga–Kermadec subduction zone to the New Zealand network of seismometers. The very early arrivals are confined to events south of about 22°S, and shallower than about 350 km. The waveforms show two distinct phases: an early, emergent, first phase with energy in the high-frequency band 2–10 Hz, and a distinct second phase, containing lower frequency energy, arriving at about the time predicted by JB tables.
The residuals are attributed to propagation through the cold, subducted lithosphere, which has a seismic velocity 5 per cent faster, on average, than normal. Ray tracing shows that the ray paths lie very close to the slab for events south of 22°S, but pass well beneath the slab for events further north, corresponding to the change in residual pattern. This characteristic of the ray paths is due to the curved shape of the seismic zone, and in particular to the bend in the zone where the Louisville ridge intersects the trench at 25°S.
The residuals can only be explained if the high velocity anomaly extends to a depth of 450 km in the region of the gap in deep seismicity from 32 to 36°S. The very high-frequency character of the first phase requires the path from the bottom of the slab to the stations to be of high Q , and to transmit 2–10 Hz energy with little attenuation.
The absence of low-frequency energy in the first phase is due to the narrowness of the high-velocity slab, which transmits only short-wavelength waves. The second phase, which contains low frequencies, is identified as a P -wave travelling beneath the subducted slab in normal mantle. There is no need to invoke any special structures, such as low-velocity waveguides or reflectors, to explain any of the observations. The S -wave arrivals show similar effects.     

S-wave travel times for a spherically averaged earth

Summary. Shear-wave travel times in a spherically averaged earth are estimated using 'differential' S minus P ( S – P ) travel-time measurements and detailed statistical procedures. Fourteen earthquakes and 48 stations are specially selected, yielding 302 S - P times for 6° < Δ < 111°. Analysis of variance techniques are used to estimate simultaneously azimuthally varying source and station adjustments while constructing an S – P travel-time model. A method of weighting the equations of condition based on the distribution of stations and epicentres is developed to reduce the effects of systematic errors due to non-random sampling of the Earth. The resulting S - P travel times are added to the 1939 Jeffreys–Bullen and the 1968 Herrin P travel times as a function of distance to obtain shear-wave travel-time models. Confidence intervals for the models are estimated from the variance of the observed S – P travel times.
The standard error for a single observed S – P travel time (6° < Δ < 111°) is 2.1 s and the residual distribution is not significantly different from a normal distribution at the 95 per cent confidence level. For 30° < Δ < 80° the mean S travel time is 1.3 s later than the corresponding mean for Jeffreys–Bullen tables, which is significant at the 95 per cent confidence level.     

Upper mantle shear structure of North America

Summary. The waveforms and travel times of S and SS phases in the range 10°–60° have been used to derive upper mantle shear velocity structures for two distinct tectonic provinces in North America. Data from earthquakes on the East Pacific Rise recorded at stations in western North America were used to derive a tectonic upper mantle model. Events on the north-west coast of North America and earthquakes off the coast of Greenland provided the data to investigate the upper mantle under the Canadian shield. All branches from the triplications due to velocity jumps near 400 and 660 km were observed in both areas. Using synthetic seismograms to model these observations placed tight constraints on heterogeneity in the upper mantle and on the details of its structure. SS–S travel-time differences of 30 s along with consistent differences in waveforms between the two data sets require substantial heterogeneity to at least 350 km depth. Velocities in the upper 170 km of the shield are about 10 per cent higher than in the tectonic area. At 250 km depth the shield velocities are still greater by about 4.5 per cent and they gradually merge near 400 km. Below 400 km no evidence for heterogeneity was found. The two models both have first-order discontinuities of 4.5 per cent at 405 km and 7.5 per cent at 695 km. Both models also have lids with lower velocities beneath. In the western model the lid is very thin and of relatively low velocity. In the shield the lid is 170 km thick with very high elocity (4.78 km s^-1); below it the velocity decreases to about 4.65 km s^-1. Aside from these features the models are relatively smooth, the major difference between them being a larger gradient in the tectonic region from 200 to 400 km.     

Upper-mantle structure of the Baltic Shield below the Swedish National Seismological Network (SNSN) resolved by teleseismic tomography

Upper-mantle structure under the Baltic Shield is studied using non-linear high resolution teleseismic P -phase tomography. Observed relative arrival-time residuals from 52 teleseismic earthquakes recorded by the Swedish National Seismological Network (SNSN) are inverted to delineate the structure of the upper mantle. The network consists of 47 (currently working) three-component broad-band stations located in an area about 450 km wide and 1450 km long. In order to reduce complications due to possible significant three-dimensionality of Earth structure, events chosen for this study lay close to in-line with the long-axis of the array  (±30°)  . Results indicate P -wave velocity perturbations of ±3 per cent down to at least 470 km below the network. The size of the array allows inversion for structures even at greater depths, and lateral variations of velocity at depths of up to 680 km appear to be resolved. Below the central part of the array (60°–64° N), where ray coverage is best, the data reveals a large region of relatively low velocity at depths of over about 300 km. At depths less than about 250–300 km, the models include a number of features, including an apparent slab-like structure dipping gently towards the north.     

Upper mantle heterogeneities beneath Central Europe

Summary. An inversion of ISC travel-time data from selected earthquakes in the distance range 30°-90° to 53 stations in Central Europe has been used to model velocity down to 600 km depth. The model explains 0.1–0.2s of the residuals, as for other array studies, leaving 0.5 s unexplained as noise. The uppermost 100 km of the mantle and crust contains inhomogeneities that correlate remarkably well with the geology. This may be due to deep-seated thermal anomalies or, in some areas, to delays introduced by passage of the rays through sedimentary cover. The deeper anomalies are smaller and unrelated to those in the lithosphere, which suggests that the asthenosphere is decoupled from the rigid lithosphere. The structure at 600 km depth is again quite inhomogeneous and might be due to undulations of the 650 km discontinuity. The models show some suggestion of a high velocity slab trending from east to west beneath the Alps.     

The S receiver functions: synthetics and data example

Recently, the S receiver function method has been successfully developed to identify upper mantle interfaces. S receiver functions have the advantage of being free of S -wave multiple reflections and can be more suitable than P receiver functions for studying mantle lithosphere. However, because of specific ray geometry and interference of diverse phases, the S receiver function method has some technical difficulties and limitations. We use synthetic seismograms to demonstrate the feasibility and limitations of S receiver functions for studying mantle structures. Full-wavefield seismograms were calculated using the reflectivity method and processed to generate synthetic S receiver functions for S , SKS and ScS waves. Results show that S receiver functions can be obtained from waveforms of S , SKS and ScS waves. The synthetic S receiver functions for these incident waves show S -to- P converted phases at all discontinuities in the crust and upper mantle. Useful ranges of epicentral distances for calculation of S receiver functions are: 55°–85° for S , >85° for SKS and 50°–75° for ScS waves. We apply both the S and P receiver function methods to data recorded at broadband station YKW3 in Northwest Canada. The study shows that there is significant agreement among different receiver function methods, and demonstrates the usefulness of S receiver functions for imaging the mantle lithosphere.     

Travel times for Pacific earthquakes

Summary. Pacific earthquakes studied by Gogna, also three important explosions in the Tuamotu archipelago, are rediscussed. The results are very consistent, but those from Tuamotu are later than Gogna's by about 1 s in the times of P about 60°. Both sets of data give PKP residuals about -5 s about 140° - 142°, indicating that the observations there referred to the neighbourhood of the cusp of the travel-time curve but the ISS had compared them with the DEF branch. The corresponding difference in the 1940 tables is about 2 s.
Analysis at intervals of 1° indicated that the cusp of PKP is about 141° instead of 143° as in the 1940 tables and the difference between it and the DEF branch at these distances is about - 5 s.
Travel times of S under the Pacific were found but need more data, especially at distances under 10°.
Times of PcP reported by Kogan and Carder were compared with those calculated from P in Gogan's explosions, and indicated a radius of the core of 3479.8 ± 1.8 km.     

Distribution of seismic anisotropy in the subduction zone beneath the Wellington region, New Zealand

Shear wave splitting measurements from S arrivals of local earthquakes recorded at the Incorporated Research Institutions for Seismology (IRIS) broadband sensor SNZO are used to determine a basic anisotropic structure for the subduction zone in the Wellington region. With the use of high-frequency filters, fast anisotropic polarization ( φ ) and splitting time ( δt ) measurements typical of crustal anisotropy are evident, but the larger splitting expected from the mantle is often not resolved. The small splitting seen agrees well with the results of previous studies concerning shallow crustal anisotropy. With the use of lower-frequency filters, measurements more consistent with mantle anisotropy are made. Anisotropy of 4.4 ± 0.9 per cent with a fast polarization of 29° ± 38° is calculated for the subducting slab, from 20 to 70  km depth. Using this result in addition to the results of previous studies, a model is proposed. The model requires a frequency-dependent anisotropy of less than 1.4 per cent when measured with a period of ~2  s to be present in the sub-slab mantle.
Separate from this population, a band of events in northern Cook Strait with an 86° ± 10° fast polarization is seen. This is at about 40° from the strike of the Hikurangi margin, and suggests a source of shear strain 40° removed from that found in the majority of the region. The cause of this is probably a deformation in the subducting slab in this region, as it moves towards a greater incline to the south.     

New seismological constraints on differential rotation of the inner core from Novaya Zemlya events recorded at DRV, Antarctica

Novaya Zemlya nuclear test records at the seismic station DRV, Antarctica, are analysed in order to obtain further constraints on a possible differential rotation of the inner core with respect to the mantle. These data allow the sampling of the inner core along a nearly polar path in very stable conditions over more than two decades, from 1966 to 1990. The PKP (BC)– PKP (DF) traveltime residuals, which reflect the inner-core anisotropy and/or heterogeneities sampled along the path, exhibit a great stability through time. A computation of the residuals that are expected for various differential rotation rates and the same rotation axis as the mantle has been performed using the worldwide residual catalogue of Engdahl et al . (1997) for summary rays that include the time as an additional parameter in data stacking. Comparison of data and predictions shows that an eastward differential rotation with a rate as large as 3°  yr⁻¹, as suggested by some authors, is not possible, but an eastward rotation at 1°  yr⁻¹ or lower cannot be rejected.     

Three-dimensional seismic structure beneath the Australasian region from refracted wave observations

The earthquakes in the seismicity belt extending through Indonesia, New Guinea, Vanuatu and Fiji to the Tonga–Kermadec subduction zone recorded at the 65 portable broad-band stations deployed during the Skippy experiment from 1993–1996 provide good coverage of the lithosphere and mantle under the Australian continent, Coral Sea and Tasman Sea.
The variation in structure in the upper part of the mantle is characterized by deter-mining a suite of 1-D structures from stacked record sections utilizing clear P and S arrivals, prepared for all propagation paths lying within a 10° azimuth band. The azimuth of these bands is rotated by 20° steps with four parallel corridors for each azimuth. This gives 26 separate azimuthal corridors for which 15 independent 1-D seismic velocity structures have been derived, which show significant variation in P and S structure.
The set of 1-D structures is combined to produce a 3-D representation by projecting the velocity values along the ray path using a turning point approximation and stacking into 3-D cells (5° by 50 km in depth). Even though this procedure will tend to underestimate wave-speed perturbations, S -velocity deviations from the ak135 reference model exceed 6 per cent in the lithosphere.
In the uppermost mantle the results display complex features and very high S -wave speeds beneath the Precambrian shields with a significant low-velocity zone beneath. High velocities are also found towards the base of the transition zone, with high S -wave speeds beneath the continent and high P -wave speeds beneath the ocean. The wave-speed patterns agree well with independent surface wave studies and delay time tomography studies in the zones of common coverage.     

Three-dimensional image of the anisotropic bodies beneath central Honshu, Japan

Shear-wave splitting from local deep earthquakes is investigated to clarify the volume and the location of two anisotropic bodies in the mantle wedge beneath central Honshu, Japan. We observe a spatial variation in splitting parameters depending on the combination of sources and receivers, nearly N–S fast in the northern region, nearly E–W fast in the southern region and small time delays in the eastern region. Using forward modelling, two models with 30 and 10 per cent anisotropy are tested by means of a global search for the locations of anisotropic bodies with various volumes. The optimum model is obtained for 30 per cent anisotropy, which means a 5 per cent velocity difference between fast and slow polarized waves. The northern anisotropic body has a volume of 1.00° (longitude) × 0.5° (latitude) × 75 km (depth), with the orientation of the symmetry axis being N20°E. The southern anisotropic body has a volume of 1.25° × 1.25° × 100 km with the symmetry axis along N95°E. Our results show that the anisotropic bodies are located in low-velocity and low- Q regions of the mantle. This, together with petrological data and the location of volcanoes in the arc, suggests that the possible cause of the anisotropy is the preferred alignment of cracks filled with melt.     

Spherical harmonic representation of the magnetic field in the presence of a current density

Summary. We present the results of a systematic study of events with M _s > 6 in northern Chile (20–33°S), for the period between 1963 and 1971. Medium to large earthquakes near the coast of this region are of three types: (1) Interplate events at the interface between the downgoing slab and the overriding South American plate. These events can be very large reaching magnitudes greater than 8. (2) Intra-plate earthquakes 20–30 km inside the downgoing slab. They have fault mechanisms indicating extension along the dip of the slab and may have magnitudes up to 7.5. (3) Less frequent, M _s∼ 6 events that occur near the top of the downgoing slab and have thrust mechanisms with an almost horizontal E-W compressional axis. This type of mechanism is very different from that of the events of type 1 which are due to shallow dipping reverse faulting. There is a rotation of about 30° of the compressional axis in the vertical plane between events of types (1) and (3). Three groups of events near 32.5°, 25.5° and 21°s were studied in detail. Depth and mechanisms were redetermined by P -wave modelling and relative locations were obtained by a master event technique. Near 32.5°S, only events of types 1 and 2 were found in the time period of this study. At the two other sites, the three types of events were identified. This shows clearly that there are compressive stresses at the top of the slab and extension at the centre, a situation which is usually found in the areas where a double Benioff-zone has been identified in the seismicity.     

Seismic anisotropy in the core–mantle transition zone

Split S waves observed at Hockley, Texas from events in the Tonga–Fiji region of the southwest Pacific show predominantly vertically polarized shear-wave ( SV  ) energy arriving earlier than horizontally polarized ( SH ) energy for rays propagating horizontally through D" . After corrections are made for the effects of upper-mantle anisotropy beneath Hockley, a time lag of 1.5 to 2.0  s remains for the furthest events (93.9°–100.6° ), while the time lags of the nearer observations (90.5°–92.9° ) nearly disappear. At closer distances, the S waves from these same events do not penetrate as deeply into the lower mantle, and are not split. These observations suggest that a patch of D" beneath the central Pacific is anisotropic, while the mantle immediately above the patch is isotropic. The thickness of the anisotropic zone appears to be of the order of 100–200  km.
  Observations of shear-wave splitting have previously been made for paths that traverse D" under the Caribbean and under Alaska. SH leads SV , the reverse of the Hockley observations, but in these areas the fact that SV  leads SH in the HKT data shown here suggests a different sort of anisotropy under the central Pacific from that under Alaska and the Caribbean. The case of SH travelling faster than SV  is consistent with transverse isotropy with a vertical axis of symmetry (VTI) and does not require variations with azimuth. The case of SV  leading SH is consistent with transverse isotropy with a horizontal axis of symmetry (HTI), an azimuthally anisotropic medium, and with a VTI medium formed by a hexagonal crystal. Given that (Mg,Fe)SiO₃ perovskite appears unlikely to form anisotropic fabrics on a large scale, the presence of anisotropy may point to chemical heterogeneity in the lowermost mantle, possibly due to mantle–core interactions.     

Geometry and brittle deformation of the subducting Nazca Plate, Central Chile and Argentina

We use data from the Chile Argentina Geophysical Experiment (CHARGE) broad-band seismic deployment to refine past observations of the geometry and deformation within the subducting slab in the South American subduction zone between 30°S and 36°S. This region contains a zone of flat slab subduction where the subducting Nazca Plate flattens at a depth of ∼100 km and extends ∼300 km eastward before continuing its descent into the mantle. We use a grid-search multiple-event earthquake relocation technique to relocate 1098 events within the subducting slab and generate contours of the Wadati-Benioff zone. These contours reflect slab geometries from previous studies of intermediate-depth seismicity in this region with some small but important deviations. Our hypocentres indicate that the shallowest portion of the flat slab is associated with the inferred location of the subducting Juan Fernández Ridge at 31°S and that the slab deepens both to the south and the north of this region. We have also determined first motion focal mechanisms for ∼180 of the slab earthquakes. The subhorizontal T -axis solutions for these events are almost entirely consistent with a slab pull interpretation, especially when compared to our newly inferred slab geometry. Deviations of T -axes from the direction of slab dip may be explained with a gap within the subducting slab below 150 km in the vicinity of the transition from flat to normal subducting geometry around 33°S.     

Travel-time anomalies in the mantle under the North Atlantic

Summary. Lateral heterogeneity exists in the Earth's mantle, and may result in seismic velocity anomalies up to several per cent. If convection cells and plumes extend down to the core, then these features may be associated with local inhomogeneities observed in the lower mantle.
Published data for direct and core-reflected P -wave residuals are used to delineate velocity anomalies in the middle—lower mantle under the North Atlantic. Differential ( PcP — P ) residuals indicate travel-time anomalies near the core—mantle transition, and may be due to core topography or lateral variations in velocity. It is assumed that the anomalies occur near the midpoints of the ray paths. The main source of error in the data set may arise from phases which have been identified incorrectly. Hence trend-surfaces are fitted to the residual data to show only the large-scale trends in anomaly values, with wavelengths of the order of 1000 km.
The Azores and Colorado hot spots occur in a region covered by the data. A possible interpretation of the trend maps is that an anomalous zone extends from a relatively fast region at the core boundary at 35° N, 50° W up to these hot spots, at about 30 degrees from the vertical. This may agree with the suggestion of Anderson that plumes are chemical rather than thermal in origin. If inclⁱned plumes do exist, the deviation from the ideal vertical plume or convection cell boundary may imply that lateral shear or other distortion effects exist in the mantle.     

New seismogenic source and deep structures revealed by the 1999 Chia-yi earthquake sequence in southwestern Taiwan

In a tectonically active setting large earthquakes are always threats; however, they may also be useful in elucidating the subsurface geology. Instrumentally recorded seismicity is, therefore, widely utilized to extend our knowledge into the deeper crust, especially where basement is involved. It is because the earthquakes are triggered by underground stress changes that usually corresponding to the framework of geological structures. Hidden faults, therefore, can be recognized and their extension as well as orientation can be estimated. Both above are of relevance for assessment on seismic hazard of a region, since the active faults are supposed to be re-activated and cause large earthquakes. In this study, we analysed the 1999 October 22 earthquake sequence that occurred in southwestern Taiwan. Two major seismicity clusters were identified with spatial distribution between depths of 10 and 16 km. One cluster is nearly vertical and striking 032°, corresponding to the strike-slip Meishan fault (MSF) that generated the 1906 surface rupture. Another cluster strikes 190° and dips 64° to the west, which is interpreted as west-vergent reverse fault, in contrast to previous expectation of east vergence. Our analysis of the focal solutions of all the larger earthquakes in the 1999 sequence with the 3-D distribution of all the earthquakes over the period 1990–2004 allows us reinterpret the structural framework and suggest previously unreognized seismogenic sources in this area. We accordingly suggest: (1) multiple detachment faults are present in southwestern Taiwan coastal plain and (2) additional seismogenic sources consist of tear faults and backthrust faults in addition to sources associated with west-vergent fold-and-thrust belt.     

An earthquake swarm on the Chagos—Laccadive Ridge and its tectonic implications

Summary. An unusual, isolated swarm of earthquakes occurred on the Chagos-Laccadive Ridge in the Central Indian Ocean between 1965 and 1970. Sixteen earthquakes were "located at approximately 6.0° S, 71.3°E on the steep west facing scarp of the Chagos Bank. This swarm forms the only major seismic activity in the period 1963–76 on the otherwise aseismic ridge. The mechanisms of the three largest earthquakes were studied using body- and surface-wave data. All are extremely similar shallow normal fault events on an east—west fault plane. Such faulting is difficult to reconcile with that expected from either the trend of the Chagos-Laccadive Ridge or the spreading direction at the nearby Central Indian Ridge. The swarm may have occurred at depth on a cross fracture remaining from the breakup of the Chagos Bank and the Mascarene Plateau and the formation of the present Central Indian Ridge.