Geochemistry,chronology and stratigraphy of Neogene tuffs of the Central Andean region

Tuff layers are vital stratigraphic tools that allow correlations to be made between widely dispersed exposures. Despite their widespread occurrence in the central Andes, tuffs from both natural exposures and sedimentary cores extracted from the region's extensive salars (salt pans) are relatively unstudied. Here we lay the foundation for a tephrostratigraphic framework in the central Andes (14–28°S) by chemically and morphologically characterizing ash shards, and in some cases dating 36 Neogene distal tuffs. These tuffs occur in lacustrine and alluvial deposits from the southern Bolivian Altiplano and adjacent Atacama Desert. All tuffs are calc-akaline rhyolites, consistent with their setting in the Central Andean Volcanic Zone. Five of the older tuffs were ⁴⁰Ar/³⁹Ar dated and yield an age range of 6.63–0.75 Ma. Organic material associated with tuffs deposited into paleolake sediments, paleowetland deposits, or urine-encrusted rodent middens provide constraints on the age of several Late Pleistocene and Holocene tuffs.These tuffs provide key stratigraphic markers and ages for lake cycles and archeological sites on the Bolivian Altiplano and for assessing rates of surficial processes and archeology in both the Atacama and Altiplano. While modern climate, and consequently questions about geomorphic processes and climate change, differs in the hyperarid Atacama and the semi-arid Altiplano, the most extensive air-fall tuffs covered both regions, placing the Atacama and the Bolivian Altiplano in the same tephrostratigraphic province. For example, the Escara B tuff (～1.85 Ma), can be securely identified in both the Altiplano and Atacama. On the Altiplano, dates from the Escara B and E tuffs securely establish the age of the Escara Formation—representing the oldest expansive lake documented on the Bolivian Altiplano. By contrast, the presence of the Escara B tuff below ～6 m of alluvial sediment at the Blanco Encalado site in the Atacama desert yields information about sedimentation rates in this hyperarid region. Indeed, most tuffs from the Atacama Desert are older than 600,000 years, even though they occur within fluvial terraces immediately adjacent to the alluvial fans that are still active. Most of these geomorphic surfaces in the Atacama also possess well-developed saline soils that, when combined with the radiometric ages of the distal tuffs, suggest slow rates of geomorphic change and exceptional landscape stability for this area during the Quaternary.In contrast, younger tuffs are more abundant in the more recent lake records of the Altiplano. The Chita tuff was deposited at ～15,650 cal yr B.P., during the regressive phase of the region's deepest late Quaternary lake cycle—the “Tauca lake cycle”—which spanned 18.1–14.1 cal yr B.P. Two Holocene tuffs, the Sajsi tuff and the Cruzani Cocha tuff, are widespread. The Sajsi tuff was deposited just before 1700 cal yr B.P., whereas the Cruzani Cocha tuff appears to be mid-Holocene in age and shows some chemical affinities to a Holocene tuff (202B) deposited between 4420 and 5460 cal yr B.P. in a urine-encased rodent midden in the Atacama Desert.     

Geologic age of the lower Josoji Formation,Shimane Peninsula,Southwest Honshu,Japan: Implications for an abrupt change to deep-water during the earlier opening stage of the Japan Sea

The lower part of the Josoji Formation, Shimane Peninsula, contains clues for figuring out changes in deep-water characteristics during the opening of the Japan Sea. The foraminiferal assemblage includes early to middle Miocene biostratigraphic index taxa such as planktonic foraminiferal Globorotalia zealandica and Globorotaloides suteri. The occurrence of these two species, together with the absence of praeorbulinids, suggests that the lower part of the Josoji Formation is assigned to the top of planktonic foraminiferal Zone N7/M4 (16.39 Ma). The benthic foraminiferal assemblage, which is characterized by Cyclammina cancellata and Martinottiella communis, clearly suggests that the lower Josoji Formation was deposited at bathyal depths, and that it developed in association with the abrupt appearance of deep-sea calcareous forms. Such bathyal taxa are the main constituents of the Spirosigmoilinella compressa–Globobulimina auriculata Zone of the Josoji Formation and also of the Gyrodina–Gyroidinoides Zone at Ocean Drilling Program Site 797 in the Japan Sea. The base of these benthic foraminiferal zones can be correlated with the base of the nannofossil Sphenolithus heteromorphus Base Zone (= CNM6/CN3); thus, its estimated age is 17.65 Ma. This biostratigraphic information suggests that the lower Josoji Formation was deposited from shortly before 17.65–16.39 Ma in upper limit age. Evidence that fresh to brackish and shallow-water basins formed in the rifting interval of 20–18 Ma in the Japan Sea borderland suggests that the abrupt appearance of deep-sea calcareous foraminifera occurred about 1 my earlier in this area than in other sedimentary basins and suggests that a significant paleoceanographic change occurred in the proto-Japan Sea at 17.65 Ma.     

U–Pb zircon age from the radiolarian‐bearing Hitoegane Formation in the Hida Gaien Belt,Japan

The dating of radiolarian biostratigraphic zones from the Silurian to Devonian is only partially understood. Dating the zircons in radiolarian‐bearing tuffaceous rocks has enabled us to ascribe practical ages to the radiolarian zones. To extend knowledge in this area, radiometric dating of magmatic zircons within the radiolarian‐bearing Hitoegane Formation, Japan, was undertaken. The Hitoegane Formation is mainly composed of alternating beds of tuffaceous sandstones, tuffaceous mudstones and felsic tuff. The felsic tuff and tuffaceous mudstone yield well‐preserved radiolarian fossils. Zircon grains showing a U–Pb laser ablation–inductively coupled plasma–mass spectrometry age of 426.6 ± 3.7 Ma were collected from four horizons of the Hitoegane Formation, which is the boundary between the Pseudospongoprunum tauversi to Futobari solidus–Zadrappolus tenuis radiolarian assemblage zones. This fact strongly suggests that the boundary of these assemblage zones is around the Ludlowian to Pridolian. The last occurrence of F. solidus is considered to be Pragian based on the reinterpretation of a U–Pb sensitive high mass‐resolution ion microprobe (SHRIMP) zircon age of 408.9 ± 7.6 Ma for a felsic tuff of the Kurosegawa belt, Southwest Japan. Thus the F. solidus–Z. tenuis assemblage can be assigned to the Ludlowian or Pridolian to Pragian. The present data also contribute to establishing overall stratigraphy of the Paleozoic rocks of the Fukuji–Hitoegane area. According to the Ordovician to Carboniferous stratigraphy in this area, Ordovician to Silurian volcanism was gradually reduced to change the sedimentary environment into a tropical lagoon in the early Devonian. And the quiet Carboniferous environment was subsequently interrupted, throwing it once more into the volcanic conditions in the Middle Permian.     

Geology and age model of the Lower Pleistocene Nojima,Ofuna, and Koshiba Formations of the middle Kazusa Group,a forearc basin‐fill sequence on the Miura Peninsula,the Pacific side of central Japan

We present field and core observations, nannofossil biostratigraphy, and stable oxygen isotope fluctuations in foraminiferal tests to describe the geology and to construct an age model of the Lower Pleistocene Nojima, Ofuna, and Koshiba Formations (in ascending order) of the middle Kazusa Group, a forearc basin‐fill succession, exposed on the northern Miura Peninsula on the Pacific side of central Japan. In the study area, the Nojima Formation is composed of sandy mudstone and alternating sandy mudstone and mudstone, the Ofuna Formation of massive mudstone, and the Koshiba Formation of sandy mudstone, muddy sandstone, and sandstone. The Kazusa Group contains many tuff beds that are characteristic of forearc deposits. Thirty‐six of those tuff beds have characteristic lithologies and stratigraphic positions that allow them to be traced over considerable distances. Examination of calcareous nannofossils revealed three nannofossil datum planes in the sequences: datum 10 (first appearance of large Gephyrocapsa), datum 11 (first appearance of Gephyrocapsa oceanica), and datum 12 (first appearance of Gephyrocapsa caribbeanica). Stable oxygen isotope data from the tests of the planktonic foraminifer Globorotalia inflata extracted from cores were measured to identify the stratigraphic fluctuations of oxygen isotope ratios that are controlled by glacial–interglacial cycles. The observed fluctuations were assigned to marine isotope stages (MISs) 49–61 on the basis of correlations of the fluctuations with nannofossil datum planes. Using the age model obtained, we estimated the ages of 24 tuff beds. Among these, the SKT‐11 and SKT‐12 tuff beds have been correlated with the Kd25 and Kd24 tuff beds, respectively, of the Kiwada Formation on the Boso Peninsula. The Kd25 and Kd24 tuff beds are widely recognized in Pleistocene strata in Japan. We used our age model to date SKT‐11 at 1573 ka and SKT‐12 at 1543 ka.     

U–Pb zircon ages of the Nakanogawa Group in the Hidaka Belt,northern Japan: Implications for its provenance and the protolith of the Hidaka metamorphic rocks

Zircon U–Pb ages of two acidic tuff and two turbidite sandstone samples from the Nakanogawa Group, Hidaka Belt, were measured to estimate its depositional age and the development of the Hokkaido Central Belt, northeast Japan. In the northern unit, homogeneous zircons from pelagic acidic tuff from a basal horizon dated to 58–57 Ma, zircons from sandstone from the upper part of the unit dated to 56–54 Ma, and zircons from acidic tuff from the uppermost part dated to 60–56 Ma and 69–63 Ma. Both of the tuff U–Pb ages are significantly older than the youngest radiolarian fossil age (66–48 Ma). Therefore, the maximum depositional age of the turbidite facies in the northern unit is 58 Ma and the younger age limit, estimated from the fossil age, is 48 Ma. In the southern unit, homogeneous zircons from turbidite sandstone dated to 58–57 Ma. Thus the depositional age of this turbidite facies was interpreted to be 66–56 Ma from the fossil age, probably close to 57 Ma. Most of the zircon U–Pb ages from the Nakanogawa Group are younger than 80 Ma, with a major peak at 60 Ma. This result implies that around Hokkaido volcanic activity occurred mainly after 80 Ma. Older zircon ages (120–80 Ma, 180–140 Ma, 340–220 Ma, 1.9 Ga, 2.2 Ga, and 2.7 Ga) give information about the provenance of other rocks in the Hidaka Belt. It is inferred that the Nakanogawa Group comprises protoliths of the upper sequence of the Hidaka Metamorphic Zone, which therefore has the same depositional age as the Nakanogawa Group (66–48 Ma). The depositional ages of the lower sequence of the Hidaka Metamorphic Zone and the Nakanogawa Group are probably the same.     

Mineralogy and temporal relations of coexisting authigenic minerals in altered silicic tuffs and their utility as potential low-temperature dateable minerals

Coexisting fine-grained (0.1–20 μm) authigenic silicate minerals separated from altered tuffs in Miocene and Plio-Pleistocene lacustrine deposits were characterized petrographically and using X-ray powder diffraction. The authigenic minerals are dominated by clinoptilolite, erionite, phillipsite, K-feldspar, silica, calcite, smectite, and randomly interstratified illite/smectite. Minor accessories of opal-CT, cristobalite, and barite are present with the major alteration minerals. Authigenic minerals from altered tuffs were dated using the K/Ar method to evaluate the utility of these minerals for determining the time of alteration in low-temperature diagenetic environments. The eruption ages of some of these zeolite-rich tuffs were determined using the ⁴⁰Ar/³⁹Ar method on single sanidine and plagioclase minerals. The K/Ar isotopic ages of the fine-grained K-feldspar show minimal variation compared with results from the clinoptilolite separates. The isotopic ages from the authigenic K-feldspar (15-13.8 Ma) and some of the zeolites (16.-6.7 Ma) are similar to the eruption ages of the tuffs and indicate early alteration. Despite their open-framework structure, zeolites apparently can retain part or all of their radiogenic argon under favorable conditions (e.g., saturated environment). How much of the radiogenic argon is retained is estimated from the isotopic ages of other coexisting secondary minerals that are commonly dated by the K/Ar method. Although zeolite isotopic ages should be interpreted with caution, they may be useful to constrain temporal relations of low-temperature diagenetic processes when used in conjunction with other dateable minerals.     

A magnetic polarity time scale for the Early Cretaceous and Late Jurassic

The ages of polarity chrons in previous M-sequence magnetic polarity time scales were interpolated using basal sediment ages in suitably drilled DSDP holes. This method is subject to several sources of error, including often large paleontological age ranges. Magnetostratigraphic results have now tied the Early Cretaceous and Late Jurassic paleontological stage boundaries to the M-sequence of magnetic polarity. The numeric ages of most of these boundaries are inadequately known and some have been determined largely by intuition. An examination of relevant data suggests that 114 Ma, 136 Ma and 146 Ma are optimum estimates for the ages of the Aptian/Barremian, Cretaceous/Jurassic and Kimmeridgian/Oxfordian stage boundaries, respectively. Each of these boundaries has a good correlation to the M-sequence of magnetic reversals. The magnetostratigraphic tie-level ages are linearly related to the spreading distance and have been used to calculate a new magnetic polarity time scale for the Early Cretaceous and Late Jurassic. All stage boundaries in this time interval were correlated by magnetic stratigraphy to the proposed new time scale which was then used to estimate their numeric ages. These are, with the approximate relative errors of placement within the M-sequence:The absolute errors of these interpolated stage boundary ages depend on the accuracy of the tie-level ages.     

Strontium isotopic evidence against magma addition in the Upper Zone of the Bushveld Complex

Sr-isotopic data from the Main and Upper Zones of the Bushveld Complex show that the evolution of the Upper Zone started with a large influx of magma close to the level of the “Pyroxenite Marker”, a distinctive orthopyroxenite layer in otherwise relatively uniform gabbronorites. Whole rock samples, which span the complete stratigraphic succession (ca. 2100 m) above this layer, fall on a single RbSr isochron (2066 ± 58Ma) and hence have a common initial ratio of 0.7073 ± 1. This ratio is significantly lower than those of the Main Zone (ca. 0.7085), below the level of the Pyroxenite Marker.The entire Upper Zone crystallized from a mixed magma which was thoroughly blended before crystallization. This magma had an isotopic ratio intermediate between that of the Main Zone and the added magma which had an initial ratio of ca. 0.7067. Further significant magma additions during crystallization are precluded unless they were of the same isotopic composition as the blended magma, which is considered improbable. Hence the layering and mineralogical diversity of the Upper Zone was produced by internal processes and not produced by magma influxes during crystallization.The lithological, compositional and isotopic changes at the Pyroxenite Marker and the petrological coherence of all rocks above this horizon support the placing of the Upper Zone boundary at this point in the stratigraphy.     

The neotectonics of the Aegean: An alternative view

Flow directions are estimated from the measurement of the magnetic fabric of 106 samples, collected at 18 sites in four welded tuff units in the central San Juan Mountains of southern Colorado. The estimates assume that the tuffs generally flowed directly away from the extrusive vents and that the lineations of magnetic grains within the tuffs represent the flow direction at individual sites. Errors in the estimation may arise from topographic variation, rheomorphism (post-emplacement mass flow) within the tuff, and other factors. Magnetic lineation is defined as the site mean anisotropy of magnetic susceptibility maximum azimuth. A test on the flow directions for individual units is based on the projection of lineation azimuths and their intersection within or near the known source caldera for the tuff. This test is positive for the four units examined. Paleomagnetic results for these tuffs are probably reliable indicators of the geomagnetic field direction in southwest Colorado, during the time (28.2–26.5 Ma) of emplacement.     

The Christmas Mountains caldera complex,Trans-Pecos Texas

The Christmas Mountains caldera complex developed approximately 42 Ma ago over an elliptical (8×5 km) laccolithic dome that formed during emplacement of the caldera magma body. Rocks of the caldera complex consist of tuffs, lavas, and volcaniclastic deposits, divided into five sequences. Three of the sequences contain major ash-flow tuffs whose eruption led to collapse of four calderas, all 1–1.5 km in diameter, over the dome. The oldest caldera-related rocks are sparsely porphyritic, rhyolitic, air-fall and ash-flow tuffs that record formation and collapse of a Plinian-type eruption column. Eruption of these tuffs induced collapse of a wedge along the western margin of the dome. A second, more abundantly porphyritic tuff led to collapse of a second caldera that partly overlapped the first. The last major eruptions were abundantly porphyritic, peralkaline quartz-trachyte ash-flow tuffs that ponded within two calderas over the crest of the dome. The tuffs are interbedded with coarse breccias that resulted from failure of the caldera walls. The Christmas Mountains caldera complex and two similar structures in Trans-Pecos Texas constitute a newly recognized caldera type, here termed a laccocaldera. They differ from more conventional calderas by having developed over thin laccolithic magma chambers rather than more deep-seated bodies, by their extreme precaldera doming and by their small size. However, they are similar to other calderas in having initial Plinian-type air-fall eruption followed by column collapse and ash-flow generation, multiple cycles of eruption, contemporaneous eruption and collapse, apparent pistonlike subsidence of the calderas, and compositional zoning within the magma chamber. Laccocalderas could occur else-where, particularly in alkalic magma belts in areas of undeformed sedimentary rocks.     

K/Ar dates of hydrothermal clays from core hole VC-2B, Valles caldera, New Mexico and their relation to alteration in a large hydrothermal system

Seventeen K/Ar dates were obtained on illitic clays within Valles caldera (1.13 Ma) to investigate the impact of hydrothermal alteration on Quaternary to Precambrian intracaldera and pre-caldera rocks in a large, long-lived hydrothermal system ( 1.0 Ma to present). Clay samples came from scientific core hole VC-2B (295°C at 1762 m) which was spudded in the Sulphur Springs thermal area and drilled into the boundary between the central resurgent dome and the western ring-fracture zone. Six illitic clays within Quaternary caldera-fill debris flow, tuffaceous sediment, and ash-flow tuff (48 to 587 m depth) yield ages from 0.35 to 1.09 Ma. Illite from Miocene pre-caldera sandstone (765 m) gives an age of 6.74 Ma. Two dates on illite from sandstones in Permian red beds (1008 and 1187 m) are 4.33 and 4.07 Ma, respectively. Surprisingly, three dates on illites from altered andesite pebbles within the red beds (1010–1014 m) are 0.95 to 1.06 Ma. Four illite dates on variably altered Precambrian quartz monzonite (1615–1762 m) range from 2.90 to 276 Ma.Post-Valles age illite is not correlated with alteration style (argillic to propylitic). Rather, post-Valles ages are uniformly obtained from illites in highly fractured, intensely altered, caldera-fill rocks and the Permian volcanic clasts. Generally, finer clay fractions from identical samples yield younger ages. Plots of ⁴⁰Ar/³⁶Ar versus ⁴⁰K/³⁶Ar and ⁴⁰Ar* versus ⁴⁰K for the illites in caldera-fill rocks lie close to a 1-Ma isochron. Most illite dates older than Valles caldera are difficult to interpret because they correspond to the ages of pre-Valles volcanic and hydrothermal episodes in the Jemez volcanic field ( 13 Ma). In addition, older dates may be caused by co-mingling of different illites during sample preparation, or by inherited argon or lost argon in illites from rocks with potentially complex hydrothermal histories. However, the range of ages obtained from illites in Permian sands and pebbles and from Precambrian crystalline rocks indicates that Valles hydrothermal activity is overwhelming illite produced by earlier geologic events.     

Subaqueous volcanism in the Paleo-Pacific Ocean based on Jurassic basaltic tuff and pillow basalt in the Raohe Complex,NE China

On-land records of subaqueous explosive volcanic eruptions are rarely reported.To understand this phenomenon and discuss its global significance,we studied the geochronology and geochemistry of basaltic tuff and pillow basalt in the Raohe Complex,NE China.The basaltic tuff consists of well-sorted vitreous,crystal(mostly clinopyroxene),and minor lithic fragments.It is characterized by a high Mg O(15.7–15.9%)content and zero Eu anomalies(Eu/Eu~*=99–102).The tuff erupted at 172±1 Ma based on SHRIMP zircon U-Pb dating,coeval with the previously reported age of the pillow basalt.The pillow basalt has intermediate Mg O content and weakly negative Eu anomalies(Eu/Eu~*=90–99).Based on immobile trace element discrimination,the basaltic tuff and pillow basalt belong to alkali basalt displaying an OIB-type trace element pattern,and consistent Nd isotope signatures ofε_(Nd)(t)=4.4–6.2,indicating an identical mantle source.The pillow basalt has coupled Sr-Nd isotopic values,whereas the basaltic tuff has significantly higher initial~(87)Sr/~(86)Sr values that are similar to synchronous seawater.This indicates that the elemental exchange between the mantle-derived material and seawater most likely occurred in a subaqueous explosive volcanic eruption,rather than in an effusive eruption.Detailed calculations suggest that the high efficiency of the Sr-isotope exchange between seawater and the mantle-derived material triggered by a subaqueous explosive volcanic eruption is likely one of the main reasons for the rapid decrease of the global seawater~(87)Sr/~(86)Sr value.     

Origin of some bedded welded tuffs

Well defined, laterally continuous welded tuff beds from <1 cm to 2 m thick are more common than has previously been recognized. Examples ranging in composition from rhyolitic to basaltic are described from Ordovician volcanic areas in Britain and Norway, and from the Miocene of the Canary Islands. Bedded welded tuffs are most common in areas of alkaline and peralkaline acidic pyroclastics. They generally occur within successions of massive, welded ash-flow tuff, or within non-welded air-fall tuff successions. Sequences consisting entirely of bedded welded tuff range from <1 m up to 75 m thick. Bedded welded tuffs are thought to originate in three ways. Poorly sorted, thick-bedded welded tuffs are interpreted as the deposits of pyroclastic flows, in which case the beds represent either individual flows units or the layers within flow units. Better sorted, thin-bedded welded tuffs are thought to be of air-fall origin. Thirdly, welding may be produced by the effects of an external heat source on non-welded bedded tuffs.     

全球变化的地球物理测井研究

地球物理测井可以直接服务于全球变化的方面有;地球物理测井矿物分析（粘土矿物分析计算,碳酸盐含量分析计算,反射光谱计算分析）,地球物理测井岩性分析（粗细成分含量分析计算,平均粒度,层里一纹理类型,岩石孔隙度,渗透率）磁性地层测井分析（磁测试对比或计算后为全球变化问题间接斩有：同位素地层分析,旋回与层序地层划分,地层水化学成分分析;     

Chronological and paleoceanographic constraints of Miocene to Pliocene ‘mud sea’ in the Ryukyu Islands (southwestern Japan) based on calcareous nannofossil assemblages

The Cenozoic sedimentary succession in Okinawa‐jima, including the upper Miocene to Pleistocene siliciclastic deposits (Shimajiri Group) and the Pleistocene reef to shelf deposits (Ryukyu Group), suggests a drastic paleoceanographic change from a ‘mud sea’ to a ‘coral sea.’ To delineate the paleoceanographic evolution of the mud sea, we quantified the stratigraphic distribution of the calcareous nannofossil assemblages from the Shimajiri Group in a 2119.49 m‐deep well (Nanjo R1 Exploratory Well) drilled in southern Okinawa‐jima (Ryukyu Islands, southwestern Japan). Four late Miocene and Pliocene datum planes were found in the studied interval: the first occurrence of Amaurolithus spp. (7.42 Ma), the last occurrence of Discoaster quinqueramus (5.59 Ma), the first occurrence of Ceratolithus rugosus (5.12 Ma), and the last occurrence of Reticulofenestra pseudoumbilicus (3.70 Ma). The calcareous nannofossil assemblages from the Tomigusuku Formation and the lower part of the Yonabaru Formation are characterized by a lower total number of coccoliths and abundant Sphenolithus abies that is associated, at times, with common Discoaster spp. Overall, these suggest the existence of oligotrophic conditions between 5.3 and >8.3 Ma. The total number of coccoliths increased and small Reticulofenestra spp. became more common in the middle part of the Yonabaru Formation, suggesting that eutrophic conditions were present between 3.5 and 5.3 Ma. The rare occurrence of calcareous nannofossils in the upper part of the Yonabaru Formation indicates a return to oligotrophic conditions at 3.5 Ma. Micropaleontological evidence suggests that these oceanographic changes were likely caused by local tectonic movement (shallowing of the sedimentary basin in which the Shimajiri Group was deposited).     

Late Jurassic/Early Cretaceous magnetic stratigraphy from the sümeg section,Hungary

The pelagic limestones exposed at Sümeg appear to represent continuous deposition from Kimmeridgian through Berriasian. Detrital magnetite and haematite pigment are the carriers of remanence in the red and non-red limestones in the lower part, while magnetite becomes predominant in the upper half of the section. Thermal demagnetization has succesfully removed overprint magnetizations, and a well-defined magnetic stratigraphy has been obtained. The Late Jurassic/Early Cretaceous mixed polarity interval is correlated with the sequence of geomagnetic reversals derived from oceanic magnetic anomalies.     

Evidence for isotopic equilibration of SmNd whole-rock systems in early Archaean crust of Enderby Land, Antarctica

SmNd isotopic data indicate that differential REE mobility occurred on a whole-rock scale during transitional amphibolite- to granulite-facies regional metamorphism ( 700°C, 7 kbar) in early Archaean rocks ( 3930 Ma) of the Napier Complex of Enderby Land, Antarctica. The degree of mobility is independent of metamorphic grade but correlates directly with development of tectonic fabric. Whole-rock samples with D₃-M₃ internal fabrics lie along an array corresponding to an age of 2410 ± 100Ma, whereas samples preserving only earlier fabrics preserve an older, albeit imprecisely defined isochron age. In contrast to a widely held belief, such changes did not require the presence of a large hydrous fluid flux. If the mechanism responsible for SmNd resetting at this locality (where T_CHUR ages range from 1990 Ma to 6090 Ma) is more widespread than is currently recognised, isolated SmNd model ages, particularly in complex terrains should be treated with caution.     

The geology of the angareb ring dike complex,northwestern ethiopia

The Angareb Ring Dike Complex is located in Begemder Province in northwestern Ethiopia, 55 kilometers NNW of the provincial capital Gondar. The structure was first identified in 1973 from Landsat 1 satellite imagery analysis of the East African Rift System. The complex is exposed on the floor of the Tana Graben, a feature bearing structural affinity to the East African Rift. A post-early Miocene age is ascribed to the complex. Association with other as yet univestigated circular features may define a volcanic province of early continental rifting in Ethiopia. Contained within the ring structure is a heterogenous tuff breccia of over 100 cubic kilometers in volume, composed of massive agglomorates, ash flows, welded tuffs, and subaqueous tuffs. The tuff is interpreted as filling a subsiding caldron above an eviscerating magma chamber. Mineralogy and chemical analyses depict a fractionating basaltic magma of transitional-mildly alkaline composition. Partial melting of the Precambrian basement is envisioned to explain the subalkaline granites. Comparison of chemical data with regional petrochemical interpretations suggests that the complex represents the beginning of central vent activity in the waning stages of Tertiary volcanism in Ethiopia.     

Magnetic fabrics of the Bloodgood Canyon and Shelley Peak Tuffs,southwestern New Mexico: implications for emplacement and alteration processes

Anisotropy of magnetic susceptibility (AMS) of the middle Tertiary Bloodgood Canyon and Shelley Peak Tuffs of the Mogollon-Datil volcanic field has been used to (1) evaluate the ability of AMS to constrain flow lineations in low-susceptibility ash-flow tuffs; (2) establish a correlation between magnetic fabric, magnetic mineralogy, tuff facies, and characteristics of the depositional setting; and (3) constrain source locations of the tuffs. The tuffs are associated with the overlapping Bursum caldera and Gila Cliff Dwellings basin. The high-silica Bloodgood Canyon Tuff fills the Gila Cliff Dwellings basin and occurs as thin outcrops outside of the basin. The older Shelley Peak Tuff occurs as thin outcrops both along the boundary between the two structures, and outside of the complex. AMS data were collected from 16 sites of Bloodgood Canyon Tuff basin fill, 19 sites of Bloodgood Canyon Tuff outflow, and 11 sites of Shelley Peak Tuff. Sites were classified on the basis of within-site clustering of orientations of principal susceptibility axes, based on the categories of Knight et al. (1986). Most microscopically visible oxide minerals in the Bloodgood Canyon Tuff outflow and basin fill, and in the Shelley Peak Tuff are members of the hematite-ilmenite solid solution series. However, IRM acquisition data indicate that Bloodgood Canyon Tuff basin fill and Shelley Peak Tuff have magnetic mineralogy dominated by single- or pseudo-single-domain magnetite, and that the magnetic mineralogy of the Bloodgood Canyon Tuff outflow is dominated by hematite. Hematite in Bloodgood Canyon Tuff outflow is likely to be the result of deuteric and/or low-temperature alteration of magnetite and iron silicate minerals. Bulk magnetic susceptibility is higher in magnetite-dominated ash-flow tuff (Bloodgood Canyon Tuff basin fill and Shelley Peak Tuff) than it is in hematite-dominated ash-flow tuff (Bloodgood Canyon Tuff outflow). Bloodgood Canyon Tuff outflow has the highest total anisotropy (H) of the three units, followed by Shelley Peak Tuff and Bloodgood Canyon Tuff basin fill. All three ash-flow tuffs are genearlly characterized by oblate susceptibility ellipsoids, with those of the Bloodgood Canyon Tuff basin fill nearest to spherical. At high values of total anisotropy, Shelley Peak Tuff susceptibility ellipsoids attain a prolate shape; those of Bloodgood Canyon Tuff outflow attain an increasingly oblate shape. Three factors may influence differences in total anisotropy and susceptibility ellipsoid shape: (1) ash which travelled the greatest distance before deposition may show the best development of magnetic fabric, particularly of magnetic lineation; (2) deposition of ash in a closed basin may inhibit laminar flow throughout the sheet and the resulting development of flow textures; and (3) replacement of magnetite and iron silicates preferentially oriented within the foliation plane by hematite with strong crystalline anisotropy may enhance the magnetic susceptibility within that plane. Scatter in AMS axis orientation within sites may result from: (1) greater orientation inaccuracy in block-sampled than in fielddrilled samples; (2) rheomorphism; and (3) low accuracy of AMS measurement in low-susceptibility ashflow tuffs. Evaluation of flow lineation based on AMS of sites with well-clustered K ₁ axes indicates that (1) Bloodgood Canyon Tuff basin fill flowed along a generally northwest-southeast azimuth; (2) Shelley Peak Tuff located on the boundary of the Bursum caldera and the Gila Cliff Dwellings basin flowed along a nearly east-west azimuth; and (3) Bloodgood Canyon Tuff outflow sites have K ₁ susceptibility axes generally radial to the Bursum-Gila Cliff Dwellings complex, but within-site scatter of K ₁ orientations is generally too large to draw conclusions about flow lineation orientation. Limited petrographic work on pilot thin sections adds flow direction information to AMS-derived flow lineation information.     

Anisotropy of magnetic susceptibility in welded tuffs: application to a welded-tuff dyke in the tertiary Trans-Pecos Texas volcanic province,USA

Consideration of published anisotropy of magnetic susceptibility (AMS) studies on welded ignimbrites suggests that AMS fabrics are controlled by groundmass microlites distributed within the existing tuff fabric, the sum result of directional fabrics imposed by primary flow lineation, welding, and (if relevant) rheomorphism. AMS is a more sensitive indicator of fabric elements within welded tuffs than conventional methods, and usually yields primary flow azimuth estimates. Detailed study of a single densely welded tuff sample demonstrates that the overall AMS fabric is insensitive to the relative abundances of fiamme, matrix and lithics within individual drilled cores. AMS determinations on a welded-tuff dyke occurring in a choked vent in the Trans-Pecos Texas volcanic field reveals a consistent fabric with a prolate element imbricated with respect to one wall of the dyke, while total magnetic susceptibility and density exhibit axially symmetric variations across the dyke width. The dyke is interpreted to have formed as a result of agglutination of the erupting mixture on a portion of the conduit wall as it failed and slid into the conduit, followed by residual squeezing between the failed block and in situ wallrock. Irrespective of the precise mechanism, widespread occurrence of both welded-tuff dykes and point-welded, aggregate pumices in pyroclastic deposits may imply that lining of conduit walls by agglutionation during explosive volcanic eruptions is a common process.