The effect of heterogeneous stress and strain on metamorphic fluid flow,Mary Kathleen,Australia, and a model for large-scale fluid circulation *

In the Proterozoic Mary Kathleen Fold Belt, northern Australia, infiltration of large volumes of externally derived fluid occurred synchronously with regional amphibolite-facies metamorphism and deformation. This paper develops a model of structurally controlled fluid migration by comparing the distribution of fossil fluid pathways with the inferred stress and strain patterns during the deformation. Intense fluid flow was localized within strong, relatively brittle meta-intrusive bodies, and in discrete, veined, brecciated and altered zones around their margins. In metasediments folded in a ductile manner outside these areas, fluid infiltration was negligible. The direct correlation between structural styles and the magnitude of veining and metasomatism suggests control of permeability enhancement, and hence fluid flow, by deformation. Finite difference modelling of a strong body in a weaker matrix has been used to evaluate the variation of stresses during the deformation, from which it is clear that stress and strain heterogeneities have systematically influenced the development and maintenance of metamorphic fluid pathways. Particular regions in which mean stress may be significantly lower than the average lithostatic pressures include the ‘strain shadow’zones adjacent to the strong bodies, other dilatant zones around the bodies, and the bodies themselves. This geometry is favourable not only for localized brittle deformation under amphilobite facies conditions, but also for focused fluid flow in the low mean stress regions, as evidenced by the abundance of veins. Fluid access through these metamorphic aquifers occurred during tensile failure episodes, with particularly large dilations and decimetre-scale veining in areas of strain incompatibility. It appears likely that fluid circulated many times through the Fold Belt, with flow concentrated in the metamorphic aquifers. A model is developed that explains both the structurally focused fluid flow and the postulated multi-pass recirculation by dilatancy pumping, the ‘pump engines’comprising the low mean stress zones.     

Mary Kathleen metamorphic‐hydrothermal uranium — rare‐earth element deposit: Ore genesis and numerical model of coupled deformation and fluid flow

The Mary Kathleen U‐REE orebody of the Proterozoic Mt Isa Block was the product of chemical and physical interaction between regional metamorphic/hydrothermal fluids and preexisting calcic skarns. The deposit provides excellent examples of mechanical control on ore localisation and of the complexity of ores in rocks with protracted thermal histories. Host skarns were produced by contact metasomatism around the 1740 Ma Burstall Granite, whereas the allanite‐uraninite ore formed under amphibolite‐facies conditions, late during the D₂ phase of the ca 1550–1500 Ma Isan orogeny. Observations of ore geometry are consistent with previous geochronologic data demonstrating a large time gap between skarn formation and ore genesis. Numerical modelling of coupled deformation and fluid flow suggests that veins at the core of ore shoots may have formed as tensile or shear fractures during coupling of the competent skarn host with the late‐D₂ Mary Kathleen Shear Zone, allowing a change of orientation of ore shoots with distance from the shear zone. Mineral chemistry and petrographic observations suggest the possible role of a redox control on chemical localisation of ore by conversion of Fe²⁺‐rich clinopyroxene‐rich skarn host to Fe³⁺‐rich secondary garnet ‘skarn’ and uraninite‐allanite ore. Alternately, fluid pressure drops as a consequence of fracturing of the host skarn may have triggered fluid unmixing, or fluid mixing, leading to ore precipitation. Available data do not allow clear definition of the ultimate source of the U and REE, nor of the specific chemical ore‐forming mechanism. However, regional constraints, previous Sm–Nd modelling, and our numerical models suggest a combination from proximal skarn hosts and from distal sources accessed by flow of metamorphic and/or late tectonic igneous‐derived fluids. The deposit has some similarities with ironstone‐hosted Cu–Au ± U deposits found in the nearby Cloncurry Belt.     

Determining the direction of contact metamorphic fluid flow: an assessment of mineralogical and stable isotope criteria

ABSTRACT One-dimensional fluid advection-dispersion models predict differences in the patterns of mineralogical and oxygen isotope resetting during up- and down-temperature metamorphic fluid flow that may, in theory, be used to determine the fluid flow direction with respect to the palaeotemperature gradient. Under equilibrium conditions, down-temperature fluid flow is predicted to produce sharp reaction fronts that separate rocks with isobarically divariant mineral assemblages. In contrast, up-temperature fluid flow may produce extensive zones of isobarically univariant mineral assemblages without sharp reaction fronts. However, during contact metamorphism, mineral reaction rates are probably relatively slow compared with fluid velocities and distended reaction fronts may also form during down-temperature fluid flow. In addition, uncertainties in the timing of fluid flow with respect to the thermal peak of metamorphism and the increase in the variance of mineral assemblages due to solid solutions introduce uncertainties in determining fluid flow directions. Equilibrium down-temperature flow of magmatic fluids in contact aureoles is also predicted to produce sharp δ¹⁸O fronts, whereas up-temperature flow of fluids derived by metamorphic devolatilization may produce gradational δ¹⁸O vs. distance profiles. However, if fluids are channelled, significant kinematic dispersion occurs, or isotopic equilibrium is not maintained, the patterns of isotopic resetting may be difficult to interpret. The one-dimensional models provide a framework in which to study fluid-rock interaction; however, when some of the complexities inherent in fluid flow systems are taken into account, they may not uniquely distinguish between up- and down-temperature fluid flow. It is probably not possible to determine the fluid flow direction using any single criterion and a range of data is required.     

Evidence for pre-regional metamorphic fluid infiltration of the Lower Calcsilicate Unit, Reynolds Range Group (central Australia)

Grandite garnet-rich calcsilicate rocks from the Lower Calcsilicate Unit of the regionally metamorphosed Reynolds Range Group (central Australia) crop out along a strike-parallel section in which a transition zone from M2₂ amphibolite to granulite facies rocks is exposed. Across this transition the grandite-rich layers do not show systematic changes in mineral assemblages, compositions and modes, or stable isotope compositions. These layers are deformed by F2₂ folds that are associated with the peak of regional low-pressure/high-temperature metamorphism. Therefore, the grandite-rich layers appear to pre-date regional metamorphism and to have acted as closed chemical systems during prograde M2₂ metamorphism. Mineral assemblages in the grandite-rich layers are consistent with their formation through the infiltration of oxidized, water-rich fluids (X_co2 < 0.1–0.3; log f_o2 -16 to -14). The stable isotope values of calcite (Δ¹³C=-4.2 to -0.8%₀ PDB; Δ¹⁸O = 10.5–14.0%⁰ V-SMOW) and bulk-silicate fractions (Δ¹⁸O = 6.1 to 10.8%) of the grandite-rich layers are most consistent with the infiltrating fluid being from a magmatic source. It is most likely that fluid infiltration occurred during the pre-M2₂ contact metamorphism (M2₁) that affected much of the Reynolds Range Group. The preservation of these assemblages is probably due to their high variance and little pervasive fluid-rock interaction having occurred during M2₂. The clinopyroxene- and feldspar-rich calcsilicate rocks that host the grandite-rich layers contain poikiloblastic grandite garnet that formed during prograde M2₂ metamorphism. Thin marbles that locally occur with the grandite-rich layers contain a third garnet generation that is post- or late M2₂. This grossular-rich garnet occurs in coronas around calcite, plagioclase, clinopyroxene, wollastonite and scapolite. These coronas are consistent with cooling and/or compression. However, because the marble assemblages are themselves overprinted by M2₁ grandite-rich layers the development of coronal garnet does not reflect a continuous P-T-t path. Rather, it more probably reflects the partial re-equilibration of M2₁ contact metamorphic assemblages to post-M2₂ conditions.     

Oxygen isotope geochemistry of the Omeo Metamorphic Complex,Victoria: Implications for metamorphic fluid flow,mineralisation and anatexis

Metamorphosed turbidites from the Omeo Metamorphic Complex show only minor changes in δ¹⁸O values with increasing metamorphic grade from 13.4 ± 1.7% in the chlorite and biotite zones to 12.3 ± 1.0% in the sillimanite + K‐feldspar zone. Rocks within 5 km of the S‐type granite at Hume Dam have δ¹⁸O values of 6.8–8.1% that probably reflect interaction with heated meteoric‐igneous fluids. Interaction with igneous fluids has also occurred close to other I‐ and S‐type granites in this region. However, pervasive metamorphic fluid‐rock interaction in this terrain did not occur, which limits the region's potential for hydrothermal mineralisation. Anatexis at high grades was probably via dehydration‐melting reactions that consumed muscovite and biotite, which is consistent with there being little fluid present during metamorphism. Small (kilometre scale or less) S‐type granites in the sillimanite + K‐feldspar zone have δ¹⁸O values similar to those of the surrounding metasediments and probably formed by melting of those rocks. By contrast, larger (tens of kilometres scale) Ca‐rich, peraluminous, S‐type granites have lower δ¹⁸O values than the surrounding metasediments, and may represent melts of underlying middle to lower crust.     

两广交界地区花岗岩中包体的类型，特征与成因

据包体岩相学及矿物学研究，包体岩石为角闪岩相到麻粒岩相的副变质岩，岩石类型有麻粒岩，变粒岩，片麻岩和富云包体，角闪岩相包体形成的温度为633度，压力为460Mpa-550MPa，麻粒岩包体形成的温度为781－883度，压力为530MPa-710MPa，包体为部分熔融形成寄主花岗岩岩浆的源区岩石列余，其中大容－十万大山地区角闪岩相－ 麻粒岩相包体岩石为区域动热变质成因；云开大山地区麻粒岩包体岩石为热穹隆变质成因。     

Reaction textures and fluid behaviour in very high pressure calc-silicate rocks of the Münchberg gneiss complex, Bavaria, Germany

Calc-silicate rocks occur as elliptical bands and boudins intimately interlayered with eclogites and high-pressure gneisses in the Münchberg gneiss complex of NE Bavaria. Core assemblages of the boudins consist of grossular-rich garnet, diopside, quartz, zoisite, clinozoisite, calcite, rutile and titanite. The polygonal granoblastic texture commonly displays mineral relics and reaction textures such as post kinematic grossular-rich garnet coronas. Reactions between these mineral phases have been modelled in the CaO-Al₂O₃-SiO₂-CO₂-H₂O system with an internally consistent thermodynamic data base. High-pressure metamorphism in the calc-silicate rocks has been estimated at a minimum pressure of 31 kbar at a temperature of 630d? C with X_H2, O ≥ 0.03. Small volumes of a CO₂-N₂-rich fluid whose composition was buffered on a local scale were present at peak-metamorphic conditions. The P-T conditions for the onset of the amphibolite facies overprint are about 10 kbar at the same temperature. X_Co2 of the H₂O-rich fluid phase is regarded to have been <0.03 during amphibolite facies conditions. These P-T estimates are interpreted as representing different stages of recrystallization during isothermal decompression. The presence of multiple generations of mineral phases and the preservation of very high-pressure relics in single thin sections preclude pervasive post-peak metamorphic fluid flow as a cause of a re-equilibration within the calc-silicates. The preservation of eclogite facies, very high-pressure relics as well as amphibolite facies reactions textures in the presence of a fluid phase is in agreement with fast, tectonically driven unroofing of these rocks.     

Silica mobility and fluid movement during metamorphism of the Connemara schists, Ireland

Quartz veins are developed in a wide range of metasediment types in the upper amphibolite facies rocks of Connemara, and attest to considerable migration of silica. Contrary to common assumptions, there is clear evidence that these veins do not primarily result from movement of fluid to regions of lower P–T down the regional geothermal gradient. Under amphibolite facies conditions, a dilute chloride fluid moving down temperature has the potential to alter 60g of plagioclase to muscovite for each gram of vein quartz precipitated, while cooling over the temperature interval from 650 to 500° C. The absence of significant metasomatic effects in the vein walls effectively precludes a simple origin from such through-flowing, externally derived fluids. The oxygen isotopic composition of matrix quartz shows considerable differences between different rock types (quartzite, pelite and marble), with a range of δ¹⁸O_SMOW from c.+ 11.5% (quartzite) to + 18.5% (marble). In each rock type, vein quartz compositions closely match those of the matrix quartz. These results demonstrate the importance of local segregation processes in the formation of veins, and suggest that fluid convection cells were not developed during metamorphism on a scale larger than the individual sedimentary formations, if at all. Both oxygen isotope data and the absence of metasomatism indicate that veins form primarily by segregation of quartz from the host lithologies, with only a relatively minor component of through flow of externally derived fluid. Veins are clearly not the major pathways of metamorphic dewatering. It is proposed that abundant veins in the predominantly pelitic Ballynakill Formation formed during peak metamorphic D3 folding because the formation was embrittled by high fluid pressures but was capped by impermeable marble. Hence the pelitic formation fractured repeatedly and the pore fluid drained through the fractures to form veins, while irreversible loss through the rest of the succession was a much less important process. In the central mountains of Connemara, rather pure, unreactive quartzites are cut by widely spaced, laterally extensive quartz veins that are axial planar to D3 folds. These veins may mark pathways whereby metamorphic fluid made its way through the massive impermeable quartzite from lower parts of the nappe pile, but here too, oxygen isotope data indicate considerable segregation of locally derived quartz, reflecting the importance of pumping of fluid between wail rocks and fractures relative to the component of through flow.     

Stable isotopic evidence for fluid infiltration during contact metamorphism in a multiply-metamorphosed terrane: the Reynolds Range, Arunta Block, central Australia

The Lander Rock Beds form the local basement of the Reynolds Range in the Arunta Inlier of central Australia. These dominantly quartzose and pelitic lithologies underwent low-grade ( c.   400  °C) regional metamorphism prior to contact metamorphism ( c.   2.5  kbar) around S-type megacrystic granitoids at 1820–1800  Ma. The Lander Rock Beds are overlain by metasediments of the Reynolds Range Group, which were subsequently intruded by granitoids at c. 1780  Ma. Regional metamorphism at 1590–1580  Ma produced grades varying from greenschist (400  °C at 4–5  kbar) to granulite (750–800  °C at 4–5  kbar) from north-west to south-east along the length of the Reynolds Range. Oxygen isotope ratios of the Lander Rock Beds were reset from 13.4±0.8 to as low as 6.7 adjacent to the contacts of the larger plutons, and to 10.3±1.1 around the smaller plutons. Biotite in all the major rock types found in the aureoles has δD values between −52 and −69, probably reflecting resetting by a cooling igneous+metamorphic fluid near the plutons. Sapphirine-bearing and other Mg- and Al-rich rock types have low δ¹⁸O values (4.0±0.7). The precursors to these rocks were probably low-temperature ( c. 200  °C) diagenetic–hydrothermal deposits of Mg-rich chlorite, analogous to those in Proterozoic stratiform precious metal and uranium deposits that form by the infiltration of basin brines or seawater. As in the overlying Reynolds Range Group, regional metamorphism involved little fluid–rock interaction and isotopic resetting.     

Accretion and post-accretion metamorphism in subduction complex terranes of the New England Fold Belt, eastern Australia

Abstract Regional metamorphic rocks that form Late Palaeozoic subduction complexes in central Queensland, Australia, are products of two metamorphic episodes. Synaccretion metamorphism (M1) gave rise to prehnite-pumpellyite and greenschist facies rocks, whereas a subsequent episode (M2) at about 250 Ma formed upper greenschist to upper amphibolite facies rocks of both intermediate- and low-pressure type, probably in a compressive arc or back-arc setting. A similar pattern can be recognized for 1000 km along the New England Fold Belt, although at several localities, where higher grade rocks are exposed, metamorphism was essentially continuous over the M1-M2 interval, with a rapid rise in geothermal gradient at the end of accretion. Where out-stepping of tectonic elements has occurred at long-lived convergent margins elsewhere, similar overprinting of high- by lower-pressure facies series is anticipated, complicating the tectonic interpretation of metamorphism. The discrete character of metamorphic events may be blurred where conditions giving rise to a major episode of accretion and out-stepping are followed by the subduction of a major heat source.     

Distinct zircon U–Pb and O–Hf–Nd–Sr isotopic behaviour during fluid flow in UHP metamorphic rocks: evidence from metamorphic veins and their host eclogite in the Sulu Orogen,China

Fluid plays a key role in metamorphism and magmatism in subduction zones. Veins in high‐pressure (HP) to ultrahigh‐pressure (UHP) rocks are the products of fluid‐rock interaction, and can thus provide important constraints on fluid processes in subduction zones. This contribution is an integrated study of zircon U–Pb and O–Hf, as well as whole‐rock Nd–Sr isotopic compositions for a quartz vein, a complex vein, and their host eclogite in the Sulu UHP terrane to decipher the timing and source of fluid flow under HP‐UHP metamorphic conditions. The inherited magmatic zircon cores from the host eclogite constrain the protolith age at c. 750 Ma. Their variable ε_Hf(t) values from ?1.11 to 2.54 and low δ¹⁸O values of 0.32–3.40‰ reflect a protolith that formed in a rift setting due to the breakup of the supercontinent Rodinia. The hydrothermal zircon from the quartz and the complex veins shows euhedral shapes, relatively flat HREE pattern, slight or no negative Eu anomaly, low ¹⁷⁶Lu/¹⁷⁷Hf ratios, and low formation temperatures of 660–690 °C, indicating they precipitated from fluids under HP eclogite facies conditions. This zircon yielded similar U–Pb ages of 217 ± 2 and 213 ± 3 Ma within analytical uncertainty, recording the timing of fluid flow during the exhumation of the UHP rock. It is inferred that the fluids might be of internal origin based on the homogeneity of δ¹⁸O values of the hydrothermal zircon from the quartz (?2.41 ± 0.13‰) and complex veins (?2.35 ± 0.12‰), and the metamorphic grown zircon of the host eclogite (?2.23 ± 0.16‰). The similar ε_Nd(t) values of the whole rocks also support such a point. Zircon O and whole‐rock Nd isotopic compositions are therefore useful to identify the source of fluid, for they are major and trace components in minerals involved in metamorphic reactions during HP‐UHP conditions. On the other hand, the hydrothermal zircon from the veins and the metamorphic zircon from the host eclogite exhibit variable ε_Hf(t) values. Model calculation suggests that the Hf was derived from the breakdown of major rock‐forming minerals and recycling of the inherited magmatic zircon. The variable whole‐rock initial ⁸⁷Sr/⁸⁶Sr ratios might be caused by subsequent retrograde metamorphism after the formation of the veins.     

Internal control of fluid compositions in amphibolite-facies scapolitic calc-silicates,Mary Kathleen,Australia

Unaltered metasediments of the Mary Kathleen Fold Belt are composed predominantly of layered amphibolite-facies scapolitic calc-silicate rocks in which minimal infiltration of externally derived fluids occurred during regional metamorphism. There were substantial differences in volatile activities between different layers in the layered sequences, in particular: a _CO2/a _{H 2 O} inferred from reaction progress estimates and analysis of biotite-clinopyroxene-fluid phase relations; a _NaCl/a _{H 2 O} inferred from scapolite compositions; and a _HCl/a _{H 2 O} inferred from biotite compositions. In one outcrop in which a clinopyroxene-producing reaction dominated, differences in approximate X _{CO 2}of up to 0.25 occurred between several samples collected over 50 metres. Variations in a _{H 2 O}/a _HCl of up to one order of magnitude are inferred at 1 to 50 m scales from biotite-Cl contents, and variations in NaCl contents of scapolite from 0.0 to up to 0.6 Cl atoms in the Cl–CO₃–SO₄ site reflect a large variation of a _NaCl in the coexisting fluid at similar scales. Most calcsilicate layers internally buffered fluid compositions in the H₂O–CO₂–NaCl–HCl system. Local occurrences of NaCl-rich scapolite suggest that some layers may have been in equilibrium with halite during early prograde metamorphism. At peak metamorphic temperatures, disolution of halite was complete but layers containing high-NaCl scapolite continued to buffer fluid at high values of a _NaCl. Fluid immiscibility does not appear to have affected the progress of the devolatilization reactions. Although fluid was predominantly internally buffered, moderate quantities of fluid were released by prograde mineral reactions in many layers, up to 30 cm³ fluid per 100 cm³ rock. Numerous episodes of fluid escape were required, probably via microfractures, such that the released fluid did not obviously influence reaction progress in the layers through which it passed. The anomaly of beautifully preserved internal buffering signatures and the requirement for produced fluid locally to pass across layers in a deforming rock sequence suggest that the escaping fluid did not leave any readily observable tracks. This is explained by rapid rates of fracture propogation and fluid migration therein. This internally buffered system contrasts strongly with adjacent calc-silicate rocks that show evidence for infiltration of externally derived fluids at high fluid/rock ratios, and highlights the broad range of fluid behaviour that can be expected in deforming, heterogeneous rock sequences.     

The metamorphic signature of contemporaneous extension and shortening in the central Himalayan orogen: data from the Nyalam transect, southern Tibet

Abstract Geological relationships and geochronological data suggest that in Miocene time the metamorphic core of the central Himalayan orogen was a wedge-shaped body bounded below by the N-dipping Main Central thrust system and above the N-dipping South Tibetan detachment system. We infer that synchronous movement on these fault systems expelled the metamorphic core southward toward the Indian foreland, thereby moderating the extreme topographic gradient at the southern margin of the Tibetan Plateau. Reaction textures, thermobarometric data and thermodynamic modelling of pelitic schists and gneisses from the Nyalam transect in southern Tibet (28°N, 86°E) imply that gravitational collapse of the orogen produced a complex thermal structure in the metamorphic core. Amphibolite facies metamorphism and anatexis at temperatures of 950 K and depths of at least 30 km accompanied the early stages of displacement on the Main Central thrust system. Our findings suggest that the late metamorphic history of these rocks was characterized by high- T decompression associated with roughly 15 km of unroofing by movement on the South Tibetan detachment system. In the middle of the metamorphic core, roughly 7–8 km below the basal detachment of the South Tibetan system, the decompression was essentially isothermal. Near the base of the metamorphic core, roughly 4–6 km above the Main Central thrust, the decompression was accompanied by about 150 K of cooling. We attribute the disparity between the P–T paths of these two structural levels to cooling of the lower part of the metamorphic core as a consequence of continued (and probably accelerated) underthrusting of cooler rocks in the footwall of the Main Central thrust at the same time as movement on the South Tibetan detachment system.     

Review and classification of structural controls on fluid flow during regional metamorphism

Mechanisms for kilometre-scale, open-system fluid flow during regional metamorphism remain problematic. Debate also continues over the degree of fluid flow channellization during regional metamorphism, and the mechanisms for pervasive fluid flow at depth. The requirements for pervasive long-distance fluid flow are an interconnected porosity and a large regional gradient in fluid pressure and hydraulic head (thermally or structurally controlled) that dominates over local perturbations in hydraulic head due to deformation. In contrast, dynamic or transient porosity interconnection and fluid flow accompanying deformation of heterogeneous rock suites should result in moderately to strongly channellized flow at a range of scales, of which there are many examples in the literature. Classification of fluid flow types based on scale and degree of equilibration between fluid and rock, wallrock permeability, and mode of fluid transport contributes to an understanding of key factors that control fluid flow. Closed-system fluid behaviour, with restricted fluid flow in microcracks or cracks and limited fluid–rock interaction, occurs over a range of strains and crustal depths, but requires low permeabilities and/or small fluid fluxes. Long-distance, open-system fluid flow in channels is favoured in heterogeneous rocks at high strains, moderate (but variable) permeabilities, and moderate to high fluid fluxes. Long-distance, broad, pervasive fluid flow during regional metamorphism requires that the rocks are not accumulating high strains and have high permeabilities, low permeability contrasts, and high fluid fluxes. The ideal situation for such fluid flow is in situations where the rocks are undergoing stress relaxation immediately after a major deformation phase. In the mid-crust, fairly specific conditions are thus required for pervasive fluid flow. During active orogenesis, structurally controlled fluid flow (with focused open systems surrounding regions of closed-system behaviour) predominates in most, but not all, regional metamorphic situations, at a range of scales.     

Ductile-brittle transition in pre-Alpine amphibolite facies mylonites during evolution from water-present to water-deficient conditions (Mont Mary nappe, Italian Western Alps)

In the Austroalpine Mont Mary nappe (Italian Western Alps) discrete zones of mylonites–ultramylonites developed from coarse-grained, upper amphibolite facies metapelites of pre-Alpine age. The syn–mylonitic mineral assemblage is quartz–biotite–muscovite–plagioclase–garnet–sillimanite–ilmenite–graphite, and formed via the model hydration reaction: Grt₁+Kfs+H₂O=Bt₂+Ilm₂+Qtz+Ms± Sil .Grain-size reduction of about three orders of magnitude was accompanied by extensive recrystallization of all minerals except sillimanite, and by compositional changes of garnet and biotite. Deformation took place at temperatures of 510–580  °C under low-pressure conditions (0.25–0.45 GPa) and corresponds to the latest stages of pre-Alpine metamorphic evolution. The pre-Alpine mylonitization conditions were close to the brittle-ductile transition, as indicated by syn–mylonitic generation of pseudotachylytes and high differential stress inferred from quartz grain-size piezometry. The brittle-ductile behaviour at a relatively high temperature, and the absence of annealing textures in quartz aggregates, are suggestive of water-deficient conditions during mylonitization. These were accomplished through progressive consumption of water by syn–kinematic hydration reaction and by adsorption onto the greatly increased grain boundary area resulting from dynamic recrystallization.     

Metamorphism in the New England Orogen,eastern Australia: a review

Abstract

This paper summarises current knowledge on metamorphism within the entire New England Orogen (NEO) of eastern Australia. Rocks recording metamorphic assemblages characteristic of each of the three metamorphic facies series (high, medium and low P/T) have been identified within the orogen. These include high P/T blueschists and eclogites, mid P/T orogenic metamorphism and low P/T contact aureoles and sub-regional high-temperature–low-pressure (HTLP) metamorphism (regional aureoles). Metamorphism is described as it relates to six tectonic phases of development of the NEO that together comprise two major cycles of compression–extension. Medium–high-grade contact metamorphism spans all six tectonic phases while low-grade burial and/or orogenic metamorphism has been identified for four of the six phases. In contrast, exposure of high P/T eclogites and blueschists, and generation of sub-regional low P/T metamorphism is restricted to extensional phases of the orogen. Hallmarks of the orogen are two newly identified zones of HTLP metamorphism, the older of which extends for almost the entire length of the orogen.

1. KEY POINTS

2. The orogen is dominated by low-temperature rocks while high-temperature amphibolite to granulite facies rocks are restricted to small exposures in HTLP complexes and contact aureoles.

3. Blueschist metamorphism falls into two categories; that associated with subduction during the Currabubula-Connors continental arc phase occurring at depths of ～13–30?km; and the other of Cambrian–Ordovician age, exposed within a serpentinite melange and associated with blocks of eclogite. The eclogite, initially from depths of ～75–90?km, appears to have been entrained in the deep crust for an extended period of geological time.

4. A comprehensive review of contact metamorphism in the orogen is lacking and as studies on low-grade metamorphism are more extensive in the southern part of the orogen than the north, this highlights a second research gap.

     

辽宁红透山块状硫化物矿床高级变质下盘蚀变带研究

辽宁红透山块状硫化物矿床(MSD)位于华北地台东北部的浑北花岗岩-绿岩地体内,矿区岩石受到了高级角闪岩相变质.我们的研究表明,广泛分布于红透山层状矿体下盘数百米处的和直接产于矿体下盘的堇青-直闪片麻岩(COG),分别代表了经历过变质的MSD成矿系统的半整合状和筒状海底热液蚀变带.元素地球特征显示,层状COG并非同一种岩石,而是由五种不同岩性的岩石组成,筒状COG的原岩主要由流纹质岩石组成,而在走向上与COG过渡的角闪片麻岩和黑云片麻岩则代表了各种岩性蚀变岩变质后的未蚀变原岩.相对于未蚀变原岩而言,层状COG具富Fe、Mg,贫Na、K、Ca、Rb、Sr和Ba的特征;筒状COG则富Fe、Mg、Si,贫K、Rb、Sr和Ba.蚀变带内Fe、Mg的增加,K的强烈丢失表明,蚀变带在变质前应以绿泥石化为特征.     

P-T-X conditions of calc-silicate formation: evidence from fluid inclusions and phase equilibria; Llano Uplift, central Texas, USA

Abstract The Llano Uplift in central Texas is a Grenville aged (c. 1.1 Ga) metamorphic terrane consisting predominantly of amphibolite facies mineral assemblages. The formation of these assemblages has been attributed to the emplacement of relatively late granite plutons throughout the area. Two types of granitic intrusion have previously been recognized: (1) Town Mountain Granites, which occur as relatively large, circular-shaped bodies of coarse-grained granite, and (2) Younger Granites which are present as smaller and more irregular bodies of finer-grained granite. In the central part of the uplift, wollastonite-bearing calc-silicate rocks occur within the Valley Spring Gneiss. The development of these calc-silicate rocks has been linked to infiltrating fluids presumably derived from spatially associated Younger Granites. The stability of coexisting quartz, calcite, wollastonite, grossular and anorthite and coexisting quartz, calcite, wollastonite, andradite and hedenbergite shows that the calc-silicate rocks equilibrated under H₂O-rich conditions with χCO₂ <0.10. Fluid inclusions present within the calc-silicate minerals are H₂O-rich with salinities of <17 wt% equivalent NaCl. The absence of any detectable CO₂ in the fluid inclusions may indicate entrapment of the inclusions at lower pressures and more H₂O-rich conditions compared to the stability of the peak metamorphic mineral assemblage. Homogenization temperatures, measured for texturally primary inclusions, range from 360 to 368° C corresponding to a density range from 0.53 to 0.82 g/cm³. Isochores for these fluid inclusions, when combined with the stability of the solid-solid equilibria Grs + Qtz = Wo + An, yield formation conditions of 500–550° C at 1–2 kbar. This indicates that the granitic intrusions involved in the formation of the Blount Mountain calc-silicates were emplaced at a pressure of at least 1–2 kbar.     

青藏高原东南缘点苍山-哀牢山杂岩带中片麻岩的变质演化及深熔作用特征

片麻岩是点苍山-哀牢山变质杂岩带最常见的岩石类型,主要由夕线石榴黑云二长片麻岩、石榴黑云斜长片麻岩以及含十字石蓝晶夕线石榴片麻岩所组成,其原岩的化学成分与华北克拉通典型孔兹岩系十分相似.岩相学、成因矿物学和变质反应性质研究以及温压条件估算结果表明,研究区片麻岩类岩石变质峰期的温压条件为T=700～770℃,P=0.5～0.8GPa,已达到或接近麻粒岩相变质,晚期退变质阶段的温压条件为T=600～650℃,P=0.35～0.45GPa.片麻岩变质演化的P-T轨迹具有顺时针型式.在麻粒岩相变质阶段,片麻岩类岩石普遍发生深熔作用,主要表现为含水矿物黑云母的脱水熔融和长英质矿物的部分熔融.该项研究对于进一步揭示青藏高原东南缘点苍山-哀牢山造山带的变质演化深熔作用机理及动力学过程具有重要的科学意义.     

Controls on the mechanisms of fluid infiltration and front advection during regional metamorphism: a stable isotope and textural study of retrograde Dalradian rocks of the SW Scottish Highlands

Vein-controlled retrograde infiltration of H₂O-CO₂ fluids into Dalradian epidote amphibolite facies rocks of the SW Scottish Highlands under greenschist facies conditions resulted in alteration of calcite-rich marble bands to dolomite and spatially associated ¹⁸O enrichment of about 10%. on a scale of metres. Fluid inclusion data indicate that the retrograde fluid was an H₂O-salt mixture with a low CO₂ content, and that the temperature of the fluid was about 400d? C. Detailed petrographic and textural (backscattered electron imaging) studies at one garnet-grade locality show that advection of fluid into marbles proceeded by a calcite-calcite grain edge flow mechanism, while alteration of non-carbonate wall-rock is associated with veinlets and microcracks. Stable isotopic analysis of carbonates from marble bands provides evidence for advection of isotopic fronts through carbonate wall-rocks perpendicular to dolomite veins, and fluid fluxes in the range 2.4–28.6 m³/m² have been computed from measured advection distances. Coincidence of isotope and reaction fronts is considered to result from reaction-enhanced kinetics of isotope exchange at the reaction front. Front advection distances are related to the proportion of calcite to quartz in each marble band, with the largest advection distance occurring in nearly pure calcite matrix. This relationship indicates that fluid flow in carbonates is only possible along fluid-calcite-calcite grain edges. However, experimental constraints on dihedral angles in calcite-fluid systems require that pervasive infiltration occurred in response to calcite dissolution initiated at calcite-calcite grain junctions rather than to an open calcite pore geometry. The regional extent of the retrograde infiltration event has been documented from the high δ¹⁸O of dolomite-ankerite carbonates from veins and host-rocks over an area of least 50 × 50 km in the SW Scottish Highlands. Isotopically exotic ¹⁸O-rich retrograde fluids have moved rapidly upwards through the crust, inducing isotopic exchange and mineral reaction in wall-rocks only where lithology, pore geometry or mineral solubilities, pressure and temperature have been appropriate for pervasive infiltration to occur.