Characterization of complex fluvial systems using remote sensing of spatial and temporal water level variations in the Amazon,Congo, and Brahmaputra Rivers

The Surface Water and Ocean Topography (SWOT) satellite mission will provide global, space‐based estimates of water elevation, its temporal change, and its spatial slope in fluvial environments, as well as across lakes, reservoirs, wetlands, and floodplains. This paper illustrates the utility of existing remote sensing measurements of water temporal changes and spatial slope to characterize two complex fluvial environments. First, repeat‐pass interferometric SAR measurements from the Japanese Earth Resources Satellite are used to compare and contrast floodplain processes in the Amazon and Congo River basins. Measurements of temporal water level changes over the two areas reveal clearly different hydraulic processes at work. The Amazon is highly interconnected by floodplain channels, resulting in complex flow patterns. In contrast, the Congo does not show similar floodplain channels and the flow patterns are not well defined and have diffuse boundaries. During inundation, the Amazon floodplain often shows sharp hydraulic changes across floodplain channels. The Congo, however, does not show similar sharp changes during either infilling or evacuation. Second, Shuttle Radar Topography Mission measurements of water elevation are used to derive water slope over the braided Brahmaputra river system. In combination with in situ bathymetry measurements, water elevation and slope allow one to calculate discharge estimates within 2.3% accuracy. These two studies illustrate the utility of satellite‐based measurements of water elevation for characterizing complex fluvial environments, and highlight the potential of SWOT measurements for fluvial hydrology. Copyright © 2010 John Wiley & Sons, Ltd.     

Improvement of Global Hydrological Models Using GRACE Data

After about 6 years of GRACE (Gravity Recovery and Climate Experiment) satellite mission operation, an unprecedented global data set on the spatio-temporal variations of the Earth’s water storage is available. The data allow for a better understanding of the water cycle at the global scale and for large river basins. This review summarizes the experiences that have been made when comparing GRACE data with simulation results of global hydrological models and it points out the prerequisites and perspectives for model improvements by combination with GRACE data. When evaluated qualitatively at the global scale, water storage variations on the continents from GRACE agreed reasonably well with model predictions in terms of their general seasonal dynamics and continental-scale spatial patterns. Differences in amplitudes and phases of water storage dynamics revealed in more detailed analyses were mainly attributed to deficiencies in the meteorological model forcing data, to missing water storage compartments in the model, but also to limitations and errors of the GRACE data. Studies that transformed previously identified model deficiencies into adequate modifications of the model structure or parameters are still rare. Prerequisites for a comprehensive improvement of large-scale hydrological models are in particular the consistency of GRACE observation and model variables in terms of filtering, reliable error estimates, and a full assessment of the water balance. Using improvements in GRACE processing techniques, complementary observation data, multi-model evaluations and advanced methods of multi-objective calibration and data assimilation, considerable progress in large-scale hydrological modelling by integration of GRACE data can be expected.     

Seasonal water storage change of the Yangtze River basin detected by GRACE

1 Introduction Large-scale mass redistribution, or temporal varia- tion of mass within the Earth system, the driving force of interactions between solid Earth and geophysical fluids envelope (i.e., atmosphere, ocean, and hydro- sphere), is an important geophysical process critical to human life. Most of the interactions between solid Earth and the atmosphere/oceans happen at seasonal and inter-annual time scales. One important contribu- tor of mass redistribution at seasonal and inter-annual …     

Daily discharge estimation at ungauged river sites using remote sensing

A methodology is developed to estimate daily river discharge at an ungauged site using remote sensing data. Use is made of ERS‐2 and ENVISAT satellite altimetry to provide a time series of river channel stage levels and longitudinal channel slope and Landsat satellite imagery to provide a range of channel widths over a 50 km reach of river. The data are substituted into the Bjerklie et al. ( 2003 ) equation, which is based on the Manning's resistance equation and has been developed using a global database of channel hydraulic information and discharge measurements. Our methodology has been applied at three locations on the Mekong and Ob Rivers and validated against daily in situ discharge measurements. The results show Nash–Sutcliffe efficiency values of 0.90 at Nakhon Phanom and 0.86 at Vientiane on the Mekong, and 0.86 at Kalpashevo on the Ob. Copyright © 2012 John Wiley & Sons, Ltd.     

Integration of GRACE mass variations into a global hydrological model

Time-variable gravity data of the GRACE (Gravity Recovery And Climate Experiment) satellite mission provide global information on temporal variations of continental water storage. In this study, we incorporate GRACE data for the first time directly into the tuning process of a global hydrological model to improve simulations of the continental water cycle. For the WaterGAP Global Hydrology Model (WGHM), we adopt a multi-objective calibration framework to constrain model predictions by both measured river discharge and water storage variations from GRACE and illustrate it on the example of three large river basins: Amazon, Mississippi and Congo. The approach leads to improved simulation results with regard to both objectives. In case of monthly total water storage variations we obtained a RMSE reduction of about 25 mm for the Amazon, 6 mm for the Mississippi and 1 mm for the Congo river basin. The results highlight the valuable nature of GRACE data when merged into large-scale hydrological modeling. Furthermore, they reveal the utility of the multi-objective calibration framework for the integration of remote sensing data into hydrological models.     

Hydraulic visibility: Using satellite altimetry to parameterize a hydraulic model of an ungauged reach of a braided river

What hydraulic information can be gained from remotely sensed observations of a river's surface? In this study, we analyze the relationship between river bed undulations and water surfaces for an ungauged reach of the Xingu River, a first‐order tributary of the Amazon river. This braided reach is crosscut more than 10 times by a ENVISAT (ENVironmental SATellite) track that extends over 100 km. Rating curves based on a modeled discharge series and altimetric measurements are used, including the zero‐flow depth Z ₀ parameter, which describes river's bathymetry. River widths are determined from JERS (Japanese Earth Ressources Satellite) images. Hydrodynamic laws predict that irregularities in the geometry of a river bed produce spatial and temporal variations in the water level, as well as in its slope. Observation of these changes is a goal of the Surface Water and Ocean Topography satellite mission, which has a final objective of determining river discharge. First, the concept of hydraulic visibility is introduced, and the seasonality of water surface slope is highlighted along with different flow regimes and reach behaviors. Then, we propose a new single‐thread effective hydraulic approach for modeling braided rivers flows, based on the observation scales of current satellite altimetry. The effective hydraulic model is able to reproduce water surface elevations derived by satellite altimetry, and it shows that hydrodynamical signatures are more visible in areas where the river bed morphology varies significantly and for reaches with strong downstream control. The results of this study suggest that longitudinal variations of the slope might be an interesting criteria for the analysis of river segmentation into elementary reaches for the Surface Water Ocean Topography mission that will provide continuous measurements of the water surface elevations, the slopes, and the reach widths.     

Simulating the surface waters of the Amazon River basin: impacts of new river geomorphic and flow parameterizations

This paper describes the impacts of new river geomorphic and flow parameterizations on the simulated surface waters dynamics of the Amazon River basin. Three major improvements to a hydrologic model are presented: (1) the river flow velocity equation is expanded to be dependent on river sinuosity and friction in addition to gradient forces; (2) equations defining the morphological characteristics of the river, such as river height, width and bankfull volume, are derived from 31 622 measurements of river morphology and applied within the model; (3) 1 km resolution topographic data from the Shuttle Radar Topography Mission (SRTM) are used to provide physically based fractional flooding of grid cells from a statistical representation of sub‐grid‐scale floodplain morphology. The discharge and floodplain inundation of the Amazon River is simulated for the period 1968–1998, validated against observations, and compared with results from a previous version of the model. These modifications result in considerable improvement in the simulations of the hydrological features of the Amazon River system. The major impact is that the average wet‐season flooded area on the Amazon mainstem for the period 1983–1988 is now within 5% of satellite‐derived estimates of flooded area, whereas the previous model overestimates the flooded area by about 80%. The improvements are a consequence of the new empirical river geomorphologic functions and the SRTM topography. The new formulation of the flow velocity equation results in increased river velocity on the mainstem and major tributaries and a better correlation between the mean monthly simulated and observed discharge. Copyright © 2007 John Wiley & Sons, Ltd.     

Modelling floodplain flows using a two-dimensional finite element model

A prototype two-dimensional finite element flow model for depth-averaged free surface flows was developed for floodplain environments. Limited refinement of the model's physical representation was undertaken and the enhanced scheme applied to an 11 km river channel/floodplain reach in the U.K. Preliminary model results indicate that this modelling approach can be used to identify dynamic variations in the flow field parameters over length scales of the order of 10-100 m. Potentially, such data have the ability to permit detailed analysis of short-term floodplain sedimentary dynamics.     

Development of a flood water level estimation method using satellite images and a digital elevation model for the Mekong floodplain

We have developed a flood water level estimation method that only employs satellite images and a DEM. The method involves three steps: (1) discriminating flood areas and identifying clumps of each flood area, (2) extracting the edges of the identified flood area using a buffering technique, and (3) performing spatial interpolation to transform the extracted elevation to flood water levels. We compared the estimated flood water levels with the observed ones. The RMSE using the RADARSAT was 1.99 and 1.30 m at river and floodplain points, respectively, whereas the RMSE using the MODIS was 4.33 and 1.33 m at the river and floodplain points, respectively. Given that most errors are attributed to the DEM, the method exhibited good performance. Furthermore, the method reproduced the flow directions and flood water level changes during the flooding period. Thus, we demonstrated that the characteristics of flood inundation can be understood even when ground observation data cannot be obtained.     

鄱阳湖洪泛区碟形湖湿地系统地表—地下水交互作用

洪泛系统具有复杂动态的水文环境,在季节性洪水脉冲影响下,地表—地下水交互转化对洪泛区水循环和生态环境保护等方面具有重要意义.本文采用野外试验、统计分析和达西定律等研究方法,开展了鄱阳湖洪泛区碟形湖湿地系统(河流—洲滩湿地—碟形湖)地表—地下水文学特征、相互作用和交换通量研究.数据资料显示,在地形地貌影响下,研究区洲滩地...     

Two‐dimensional hydraulic flood modelling using a finite‐element mesh decomposed according to vegetation and topographic features derived from airborne scanning laser altimetry

Airborne scanning laser altimetry (LiDAR) is an important new data source that can provide two‐dimensional river flood models with spatially distributed floodplain topography for model bathymetry, together with vegetation heights for parameterization of model friction. Methods are described for improving such models by decomposing the model's finite‐element mesh to reflect floodplain vegetation features such as hedges and trees having different frictional properties to their surroundings, and significant floodplain topographic features having high height curvatures. The decomposition is achieved using an image segmentation system that converts the LiDAR height image into separate images of surface topography and vegetation height at each point. The vegetation height map is used to estimate a friction factor at each mesh node. The spatially distributed friction model has the advantage that it is physically based, and removes the need for a model calibration exercise in which free parameters specifying friction in the channel and floodplain are adjusted to achieve best fit between modelled and observed flood extents. The scheme was tested in a modelling study of a flood that occurred on the River Severn, UK, in 1998. A satellite synthetic aperture radar image of flood extent was used to validate the model predictions. The simulated hydraulics using the decomposed mesh gave a better representation of the observed flood extent than the more simplistic but computationally efficient approach of sampling topography and vegetation friction factors on to larger floodplain elements in an undecomposed mesh, as well as the traditional approach using no LiDAR‐derived data but simply using a constant floodplain friction factor. Use of the decomposed mesh also allowed velocity variations to be predicted in the neighbourhood of vegetation features such as hedges. These variations could be of use in predicting localized erosion and deposition patterns that might result in the event of a flood. Copyright © 2003 John Wiley & Sons, Ltd.     

Improved simulation of river water and groundwater exchange in an alluvial plain using the SWAT model

Hydrological interaction between surface and subsurface water systems has a significant impact on water quality, ecosystems and biogeochemistry cycling of both systems. Distributed models have been developed to simulate this function, but they require detailed spatial inputs and extensive computation time. The soil and water assessment tool (SWAT) model is a semi‐distributed model that has been successfully applied around the world. However, it has not been able to simulate the two‐way exchanges between surface water and groundwater. In this study, the SWAT‐landscape unit (LU) model – based on a catena method that routes flow across three LUs (the divide, the hillslope and the valley) – was modified and applied in the floodplain of the Garonne River. The modified model was called SWAT‐LUD. Darcy's equation was applied to simulate groundwater flow. The algorithm for surface water‐level simulation during flooding periods was modified, and the influence of flooding on groundwater levels was added to the model. Chloride was chosen as a conservative tracer to test simulated water exchanges. The simulated water exchange quantity from SWAT‐LUD was compared with the output of a two‐dimensional distributed model, surface–subsurface water exchange model. The results showed that simulated groundwater levels in the LU adjoining the river matched the observed data very well. Additionally, SWAT‐LUD model was able to reflect the actual water exchange between the river and the aquifer. It showed that river water discharge has a significant influence on the surface–groundwater exchanges. The main water flow direction in the river/groundwater interface was from groundwater to river; water that flowed in this direction accounted for 65% of the total exchanged water volume. The water mixing occurs mainly during high hydraulic periods. Flooded water was important for the surface–subsurface water exchange process; it accounted for 69% of total water that flowed from the river to the aquifer. The new module also provides the option of simulating pollution transfer occurring at the river/groundwater interface at the catchment scale. Copyright © 2015 John Wiley & Sons, Ltd.     

Modelling hydrological connectivity of tropical floodplain wetlands via a combined natural and artificial stream network

The ecological condition and biodiversity values of floodplain wetlands are highly dependent on the hydrological connectivity of wetlands to adjacent rivers. This paper describes a method for quantifying connectivity between floodplain wetlands and the main rivers in a wet tropical catchment of northern Australia. We used a one‐dimensional hydrodynamic model to simulate time‐varying water depths across the stream network (i.e. rivers, streams and man‐made drains). The timing and duration of connectivity of seven wetlands (four natural and three artificial) with the two main rivers in the catchment were then calculated for different hydrological conditions. Location and areal extent of the wetlands and the stream network were identified using high‐resolution laser altimetry, and these data formed key inputs to the hydrodynamic model. The model was calibrated using measured water depths and discharges across the floodplain. An algorithm was developed to identify contiguous water bodies at daily time steps, and this gave the temporal history of connection and disconnection between wetlands and the rivers. Simulation results show that connectivity of individual wetlands to both rivers varies from 26 to 365 days during an average hydrological condition. Location, especially proximity to a main river, and wetland type (natural stream or artificial drain) were identified as key factors influencing these levels of connectivity. Some natural wetlands maintain connection with the river for most or all of the year, whereas the connectivity of some artificial wetlands varies from 26 to 36 days according to their patterns of network connection to adjacent rivers – a result that has important implications for the accessibility of these types of wetland to aquatic biota. Using readily available river gauge data, we also show how connectivity modelling can be used to identify periods when connectivity has fallen below critical thresholds for fish movement. These connectivity patterns within the floodplain network are central to the setting of river flows that will meet environmental requirements for biota that use floodplain wetlands during their life history. Copyright © 2013 John Wiley & Sons, Ltd.     

Challenges and objectives for geomorphology in U.K. river management

This paper reviews some of the challenges and objectives in the application of fluvial geomorphology to improved river management in the U.K. It describes the mechanisms by which geomorphology can be applied to solve problems, including the development of design guidance, policy, management approaches, procedures and training. While it is true that geomorphology is being used increasingly, there remain a number of challenges, such as the need to promote a more professional image and to develop appropriate standards. The scientific basis on which decisions relating to the water environment are made needs to be developed further. Perhaps some of the most significant challenges for fluvial geomorphology in U.K. river management during the next decade will concern river and floodplain restoration.     

Review of snow water equivalent microwave remote sensing

Accurate quantitative global scale snow water equivalent information is crucial for meteorology, hydrology, water cycle and global change studies, and is of great importance for snow melt-runoff forecast, water resources management and flood control. With land surface process model and snow process model, the snow water equivalent can be simulated with certain accuracy, with the forcing data as input. However, the snow water equivalent simulated using the snow process models has large uncertainties spatially and temporally, and it may be far from the needs of practical applications. Thus, the large scale snow water equivalent information is mainly from remote sensing. Beginning with the launch of Nimbus-7 satellite, the research on microwave snow water equivalent remote sensing has developed for more than 30 years, researchers have made progress in many aspects, including the electromagnetic scattering and emission modeling, ground and airborne experiments, and inversion algorithms for future global high resolution snow water equivalent remote sensing program. In this paper, the research and progress in the aspects of electromagnetic scattering/emission modeling over snow covered terrain and snow water equivalent inversion algorithm will be summarized.     

The interdisciplinary role of space geodesy—Revisited

In 1988 the interdisciplinary role of space geodesy has been discussed by a prominent group of leaders in the fields of geodesy and geophysics at an international workshop in Erice (Mueller and Zerbini, 1989). The workshop may be viewed as the starting point of a new era of geodesy as a discipline of Earth sciences. Since then enormous progress has been made in geodesy in terms of satellite and sensor systems, observation techniques, data processing, modelling and interpretation. The establishment of a Global Geodetic Observing System (GGOS) which is currently underway is a milestone in this respect. Wegener served as an important role model for the definition of GGOS. In turn, Wegener will benefit from becoming a regional entity of GGOS.What are the great challenges of the realisation of a 10^?9 global integrated observing system? Geodesy is potentially able to provide – in the narrow sense of the words – “metric and weight” to global studies of geo-processes. It certainly can meet this expectation if a number of fundamental challenges, related to issues such as the international embedding of GGOS, the realisation of further satellite missions and some open scientific questions can be solved. Geodesy is measurement driven. This is an important asset when trying to study the Earth as a system. However its guideline must be: “What are the right and most important observables to deal with the open scientific questions?”.     

Estimation of river discharge from non-trapezoidal open channel using QuickBird-2 satellite imagery/Utilisation des images satellites de Quickbird-2 pour le calcul des débits fluviaux en chenaux ouverts non-trapézoïdaux

Abstract

Abstract River discharge is traditionally acquired by measuring water stage and then converting the water stage to discharge by using a stage–discharge rating curve. The possibility of monitoring river discharge by satellite has not been adequately studied hitherto, because of the difficulty in making sufficiently precise measurements of the water surface. Since the successful launch of commercial satellites with very-high-resolution sensors, it has become possible to derive ground information from satellite data. To determine river discharge in a non-trapezoidal open channel, an efficient approach has been developed that uses mainly satellite data. The method, which focuses on the measurement of surface water width coupled with river width–stage and ?remote? stage–discharge rating curves, was applied to the Yangtze River (Changjiang) and an accurate estimate of river discharge was obtained. The method can be regarded as ancillary to traditional field measurement methods or other remote sensing methods.     

Reducing the Uncertainties in Direct Aerosol Radiative Forcing

Direct aerosol radiative forcing (DARF) remains a leading contributor to climate prediction uncertainty. To monitor the spatially and temporally varying global atmospheric aerosol load, satellite remote sensing is required. Despite major advances in observing aerosol amount, type, and distribution from space, satellite data alone cannot provide enough quantitative detail, especially about aerosol microphysical properties, to effect the required improvement in estimates of DARF and the anthropogenic component of DARF. However, the combination of space-based and targeted suborbital measurements, when used to constrain climate models, represents an achievable next step likely to provide the needed advancement.