拉分盆地形成机制三维数值模拟——以海原断裂带老龙湾盆地为例

拉分盆地是走滑断层系中受拉伸作用形成的断陷盆地.一般在两条平行断层控制下发育.盆地形似菱形,几何形态主要受两条主控走滑断层错距和叠接长度影响.本文以青藏高原东北缘海原断裂带老龙湾拉分盆地第四纪所处的构造环境为基础,参考盆地周围断层几何分布,建立了三维有限元数值模型,模拟该拉分盆地的演化过程;进一步分析了断层力学性质、地壳分层结构等各因素对盆地形成和演化的影响.模拟结果显示,盆地地表沉降伴随有下地壳物质的上涌,此上涌对盆地地表沉降存在阻碍作用.各因素的影响具体表现为:(1)断层力学性质(弹性模量和黏滞系数)越弱,其对构造应力较低的传递效率导致盆地两端差异性运动越明显,从而形成较大的盆地地表沉降和明显的上地壳减薄.(2)平行主控断层的叠接长度反映盆地形成的拉伸作用范围,叠接长度越大,相同的差异性运动在单位面积形成的拉伸应力越小,盆地地表沉降较小.(3)下地壳流变性影响其物质的上涌量,下地壳黏滞系数越小,其对上部拉伸作用的响应越明显,上涌量越大,此上涌对上地壳沉降形成的阻碍作用也越明显.根据老龙湾拉分盆地所处的构造格局,将平行断层的叠接长度取20km,当断层黏滞系数取值为周围基岩的1/10,参考该盆地第四纪构造演化历史,模拟得到的盆地第四纪下沉量与盆地内第四系沉积层厚度在规模上近似,下地壳黏滞系数取值在(2.5~5.0)×1021 Pa·s范围内时,盆地下沉量模拟结果与老龙湾拉分盆地第四系地层厚度吻合较好.     

徐家围子断陷火山机构叠置关系解析及其数字化模型参数建立

随着庆深气田勘探开发工作的不断深入,揭示出火山岩气藏以孤立火山机构控藏的特征,火山岩地层的非均质性特征非常明显,为提高火山岩气藏的综合研究程度,实现认识上的飞跃.在松辽盆地北部徐家围子断陷密井网-三维地震工区,开展了地质先验模型约束下的地震火山机构解剖.识别出层状、穹窿和漏斗形三种火山机构;它们的叠置方式有串珠、上叠和...     

Structural control and origin of volcanism in the Taupo volcanic zone,New Zealand

Taupor volcanic zone (TVZ) is the currently active volcanic arc and back-arc basin of the Taupo-Hikurangi arc-trench system, North Island, New Zealand. The volcanic arc is best developed at the southern (Tongariro volcanic centre) end of the TVZ, while on the eastern side of the TVZ it is represented mainly by dacite volcanoes, and in the Bay of Plenty andesite/dacite volcanoes occur on either side of the Whakatane graben. The back-arc basin is best developed in the central part of the TVZ and comprises bimodal rhyolite and high-alumina basalt volcanism. Widespread ignimbrite eruptions have occurred from this area in the past 0.6 Ma. Normal faults occur in both arc and back-arc basin. They are generally steeply dipping (>40°) and strike between 040° and 080°. In the back-arc basin, fault zones are en echelon and have the same trend as alignments of rhyolite domes and basalt vents. Open fissures have formed during historic earthquakes along some of the faults, and geodetic measurements on the north side of Lake Taupo suggest extension of 14±4 mm/year. In the Bay of Plenty and M_L=6.3 earthquake occurred on 2 March 1987. Modelling of known structure in the area together with data derived from this earthquake suggests block faulting with faults dipping 45°±10° NW and a similar dip is suggested by seismic profiling of faults offshore of the Bay of Plenty where extension is estimated to be 5±2 mm/year. To the east of the TVZ, the North Island shear belt (NISB) is a zone of reverse-dextral, strike-slip faults, the surface expression of which terminates at the eastern end of the TVZ. On the opposite side of the TVZ in the offshore western Bay of Plenty and on line with the NISB is the Mayor Island fault belt. If the two fault belts were once continuous, as seems likely, strike-slip faults probably extend through the basement of the TVZ. When extension associated with the arc and back-arc basin is combined with these strike-slip faults, the resulting transtension provides a suitable tectonic environment for caldera formation and voluminous ignimbrite eruptions in the back-arc basin. The types of volcano in the TVZ are considered to be related to the source of magma and overlying crustal structure. Lavas of the arc are probably formed by a multistage process involving (1) subsolidus slab dehydration, (2) anatexis of the mantle wedge, (3) fractionation and minor crustal assimilation and (4) magma mixing. High-alumina basalts of the back-arc basin may be derived by partial melting of peridotite at the top of the mantle wedge, while rhyolitic magmas are thought to come from partial melting of lavas and subvolcanic reservoirs associated with the southern end of the Coromandel volcanic zone. Extreme thinning associated with transtension in the back-arc basin will favour the eruption of large-volume, gas-rich ignimbrites accompanied by caldera formation.     

Volcano-structural evolution of Piton des Neiges,Reunion Island,Indian Ocean

Four volcano-structural stages have accompanied the building of Piton des Neiges: 1) Emergent growth stage of the island. The major eruptive system is a rift zone trending N 120°, associated with dextral strike-slip faults trending N 30° and en-echelon extensional fissures trending N 70°. Breccias and lava tubes produced by aerial and phreatomagmatic activity are injected with outward-dipping dike-swarms along ring fractures suggesting a mechanism analogous to cauldron subsidence. 2) Shield building stages of growth are related to fissures along the main rift zone and three minor rifts trending N 160°, N 45° and N 10°. The summit of the basaltic shield volcano is stretched and collapsed in a graben-like caldera depression along normal and antithetic faults. 3) Differentiated lavas are erupted during two stages separated by the opening of a new caldera corresponding to an explosive activity, a silicic cone-sheet system and a collapse structure. 4) Younger volcanic activity restricted to the inside caldera, has presumably emptied the underlying magma reservoir, building a central volcano collapsed along ring internal dip fractures. The relationships between magnetic anomalies and transform faults in the Mascarene basin and observed fissure and faults on Piton des Neiges suggest that volcanism would be structurally controlled. Active volcanism occurring possibly as a result of tension at the intersection of an northeast-southwest fracture zone with the paleorift axis (dated by the magnetic anomaly 27). Models illustrating the gradual evolution of Piton des Neiges would explain successive caldera collapses controlled by the size, the shape and the depth of the magma reservoir.     

Subsidence history and forming mechanism of anomalous tectonic subsidence in the Bozhong depression, Bohaiwan basin

The Bozhong depression of the Bohaiwan basin belongs to a family of extensional basins in East China, but is quite different from other parts of the basin. The Cenozoic subsidence of the depression is controlled by a combination of lithospheric thinning and polycyclic strike-slip movements. Three episodic rifts have been identified, i.e. Paleocence-early Eocene, middle-late Eocene and Oligocene age. The depression underwent syn-rift and post-rift stages, but two episodic dextral movement events of the strike-slip faults modify the subsidence of the Bozhong depression since the Oligocene. The early dextral movement of the Tan-Lu fault associated with crustal extension resulted in accelerated subsidence during the time of deposition of the Dongying Formation with a maximum thickness of 4000 m. A late reactivation of dextral movement of the Tan-Lu fault began in late Miocene (about 12 Ma), which resulted in the intense subsidence of Minghuazhen Formation and Quaternary. In addition, dynamic mantle convection-driven topography also accelerated the post-rift anomalous subsidence since the Miocene (24.6 Ma). Our results indicate that the primary control on rapid subsidence both during the rift and post-rift stages in the Bozhong depression originates from a combination of multiple episodic crustal extension and polycyclic dextral movements of strike-slip faults, and dynamic topography.     

Heterogeneous stretching, simple shear and basin development

The models of basin development which involve either homogeneous stretching of the whole lithosphere or displacement on a lithospheric-scale shear zone, are but two end members of a range of possible extensional models. The homogeneous extension model thins the lower lithosphere beneath the thinned upper crust and superimposes a thermal subsidence basin on the earlier fault bounded basin. The shear zone model offsets the zone of lower lithospheric stretching and thermal subsidence. It is more likely that the zones of upper and lower lithospheric stretching will be heterogeneous and patchy, but will often overlap in plan view. This will produce localised uplift and subsequent thermal subsidence within the faulted basin and may explain many of the anomalies between the various stretching estimates made using different structural, stratigraphic and geophysical techniques. The model which combines heterogeneous lithospheric stretching and associated simple shear may explain: (1) variations in dip of the major detachment zones in the large basins, (2) variations in types of strain on or beneath the detachment zones, (3) regional uplift of part of a basin, to erode the earlier fault blocks, and (4) the development of volcanism in basins with only low values of upper crustal extension. The zone of stretched lower crust and lithospheric mantle may lie beneath the centre of the zone of upper crustal stretching, or to one side. It may be linked to the upper crustal zone by faults which dip consistently in one direction, or by extensional systems which change their dominant dip direction with depth, pulling out the mid-crust as one or more wedges. Possible examples are discussed from the Basin and Range province and northwest European continental shelf.     

海原断裂干盐池拉分盆地中央断层的形成机制探讨

拉分盆地内部的"对角线式中央断层",不仅在拉分盆地的消亡过程中发挥着重要作用,还对大地震的发生具有重要控制作用,研究其形成演化具有重要的意义.然而,与拉分盆地相比,专门针对中央断层的研究较少,制约了人们对拉分盆地乃至走滑断裂带构造演化过程的理解.文中以海原断裂带中段的干盐池拉分盆地为例,对盆地内的中央断层开展了地质地貌...     

Subsurface structure across the axis of the Tongariro Volcanic Centre,New Zealand

The relationship between structure and volcanism in the Tongariro Volcanic Centre, New Zealand, is largely masked by a mantle of young volcanic deposits. Here we report the results of an integrated geophysical investigation (using gravity, multi-level aeromagnetic and magnetotelluric methods) of subsurface deposits and structures in the upper 1–2 km across the axis of the Tongariro Volcanic Centre. Modelling of these data across the Tama Lakes saddle shows that the outcropping volcanic deposits are up to 800 m thick, underlain by Tertiary sediments (of a few 10's to a few 100 m in thickness) and in turn lying above a basement of probable Mesozoic greywacke. Basement faulting is shown to be concentrated in the centre of the rift, which is 18 km wide at this location, but no vertical offset is resolved at the rift axis. Vertical displacements on basement faults of 250–300 m are modelled giving a minimum total basement subsidence of 650 m. A 5 km-wide, deep low resistivity zone occurs at the axis of the rift which is interpreted as either resulting from extensive fracturing and/or hydrothermal alteration within the basement. Steep-sided volcanic bodies with a high proportion of lavas/dykes coincide with the Waihi fault and the rift axis. Coincidence with the Waihi Fault suggests that this fault system may have provided magma pathways to the surface and a focus for dyke emplacement, which could have contributed to rift extension. The lack of offset at the rift axis may reflect the juvenile nature of faulting at this location, which is consistent with the notion of a migration of faulting towards the centre of the graben, alternatively, rifting may have been entirely accommodated by dyke emplacement.     

辽河盆地东部凹陷新生代伸展-走滑构造作用及断裂构造特征

基于最新的三维地震资料处理与地震剖面解释、地震相干切片分析和平衡剖面恢复等方法,对辽河盆地东部凹陷所发育的断裂几何形态、盆地演化过程和走滑构造平面特征进行研究,并结合区域板块构造活动背景,分析其对郯庐断裂带新生代时期活动的响应.结果表明:辽河盆地东部凹陷为伸展和走滑两期构造变形叠加的产物,是具有"下断上坳"双层结构的裂谷型盆地.盆地演化过程经历了强烈断陷期(Es3)、区域隆升期(Es2)、断坳转化期(初始走滑期)(Es1)、坳陷沉降期(强烈走滑期)(Ed)和构造反转期(Ng-现今)5个演化阶段.研究区主要发育正断层、逆断层、走滑正断层和走滑逆断层4种断层类型,经伸展间歇期和后期区域挤压作用,发育两期正反转构造.盆地经历的走滑运动过程可细化为初始走滑(Es1),强烈走滑(Ed)和衰减走滑(Ng)3个阶段.     

Field evidence for flank instability,basal spreading and volcano-tectonic interactions at Mt Cameroon,West Africa

The Mt Cameroon volcano is the highest and most active volcano of the Cameroon Volcanic Line. Little geological information is available for improving the understanding of the structure of this large volcanic system and its relationship to regional tectonics. After reviewing the tectonic evolution of the region, the analysis of a Digital Elevation Model and results from a field campaign dedicated to mapping geological structures in the summit area and at the SE base of Mt Cameroon are presented. Mt Cameroon is a lava-dominated volcano with long steep (over 30°) flanks. It is elongate parallel to its well defined rift zone. The summit plateau is bordered by 10 m high cliffs formed by summit subsidence along normal faults. Geological profiles were measured along rivers cutting through a topographic step at the SE base of Mt Cameroon. This step is associated with deformed Miocene sediments from the Douala basin that are overlain by volcanic products. Weak sediments of this area are deformed by 050°–060° and 020°–030° trending asymmetrical folds verging toward the SE, and thrusts faults related to the spreading of the volcano over its mechanically weak substratum. Combined remote sensing and field observations suggest that spreading is accommodated by summit subsidence and flanks sliding. Both slow spreading movements and catastrophic collapses of the steep flanks are interpreted to result from complex interactions between the growing edifice, repeated dyke intrusions, the weak sedimentary substratum and tectonic structures.     

红河断裂带第四纪右旋走滑与尾端拉张转换关系研究

红河断裂带早第四纪以来发生的大规模右旋走滑运动，导致断裂北段尾端的质量亏损，形成了拉张区。右旋走滑量为７．１ｋｍ左右，拉张区右旋方向上的扩张量为５．３５ｋｍ左右，二者相互转换的量级是基本一致的，从而定量地证实了它们之间的成因联系     

Late Cenozoic sedimentary process and its response to the slip history of the central Altyn Tagh fault,NW China

The ENE-striking Altyn Tagh fault (ATF), extending along the northern edge of the Ti-betan Plateau, is one of the major important strike-slip faults, and has been known as one of the key areas to debate the eastward extrusion and crustral shortening models of the Tibetan Plateau during and after India-Asia collision. This paper mainly presents new evidence of Late Cenozoic sedimentary process to reconstruct the slip history of the ATF during the Late Cenozoic. Field measurements and laboratory analyses of the sedimentary characteristics in the Late Cenozoic basins in the central Altyn Tagh fault suggest that Late Cenozoic sedimentary sequence should be divided into three units according to facies changes. The paleo-topography reconstruction shows that the sedimentarion in these basins was tightly related with the fault, indicating that the ATF has experienced at least three stages of strike slipping in the Late Cenozoic. New geological data from the Late Cenozoic sedimentary basins and the formation of the present Suo’erkuli basin provide evidence for the displacement of the fault. The result shows that the 80–100 km left-lateral strike-slip displacement of the fault has been accumulated in the Late Cenozoic.

     

History of faulting and magmatism in the Galilee (Israel) and across the Levant continental margin inferred from potential field data

The Galilee study area, northern Israel, is at present an uplifted, steep continental margin that formed mainly during the Jurassic and has a large positive isostatic anomaly. Since the Jurassic, it was modified by several tectonomagmatic events, which this study attempts to define and classify by updating, reprocessing and reinterpreting gravity, aeromagnetic and geological data. The prominent Rehovot-Carmel N–S positive reduced-to-pole (RTP) magnetic anomaly caused by the Gevim Volcanics, as well as the coexisting Helez-Gaash high Bouguer gravity and the Pleshet low Bouguer gravity, represent the deep (>5 km) Permo-Triassic dominant horst and graben structure of Israel. The Jonah Ridge and Beirut high SW–NE RTP magnetic anomalies in the Levant basin delineate the Levant continental edge that is marked by a deeply buried horst covered by a Late Cretaceous volcanic complex. The Asher and Devora Jurassic volcanics appear to be responcible for the Atlit and Galilee negative magnetic anomalies and for significant negative gravity anomalies which became clear after removing gravity effect of the upper (post-Turonian) light density sediments from the observed gravity. The volcanics extend along a SW–NE belt parallel to the strike of the Moho. It is suggested here that the Carmel-Gilboa fault propagated during the Late Cretaceous from the Levant basin across the Galilee area southeastward to form the Azraq-Sirhan graben in Jordan. As such, it forms a right-step, en echelon, dextral strike-slip fault with associated tectonic basins of various shapes. During the Oligocene and before formation of the Dead Sea transform (DST), the reactivation of the Azraq-Sirhan graben was accompanied by tectonic driven rift propagation in the opposite direction, from Azraq-Sirhan to northwest. It dispersed into many faults and terminated ∼10 km west of the present DST. During the Miocene it propagated in the same direction and includes internal volcanic activity. The numerous Miocene-Pliocene volcanic centers on the margins of the DST indicate that the preferred pathway for magmas at that time was not within the deep basins of the DST.     

Structural characteristics of the Tan-Lu fault zone in Cenozoic basins offshore the Bohai Sea

The Tan-Lu fault zone across the eastern margin of the Cenozoic basins offshore the Bohai Sea is a NNE-trending right-lateral strike-slip fault system developed in the Cenozoic basin cover. It cuts through NE-to NNE-striking major extensional faults that controlled the formation of Paleogene basins. Recent petroleum exploration indicates that Cenozoic structural activities of the Tan-Lu fault system have directly or indirectly affected oil and gas distribution offshore the Bohai Sea. As part of a deep fault zone the Tan-Lu fault zone has been activated since the Oligocene,and obviously affected the tectonic evolution of offshore Bohai basins since then. The formation of Paleogene rift basins offshore the Bohai Sea has utilized the pre-existing structural elements of the Tan-Lu fault zone that developed in the late Mesozoic.     

阿尔金走滑断裂带昌马段的电性结构样式及构造意义

阿尔金断裂带东段走滑速率沿断裂走向方向存在明显的流失现象,有关阿尔金断裂带的影响范围及走滑速率变化的机制需要有更多的深部结构证据来提供支撑.本文以阿尔金断裂带昌马段为窗口,获取了4条横穿阿尔金断裂带及相邻地区的大地电磁测深剖面.二维电性剖面显示在阿尔金断裂带北侧中上地壳以连续的高阻体为主,而南侧祁连山内部的深部电性结构在横向上有较为复杂的变化.这一点与区域构造背景相对应,即北侧的塔里木盆地东缘依然具有较好的整体性,南侧的祁连山是青藏高原北缘生长的最前端,变形强烈.在断裂带的结构特征上,阿尔金断裂带沿走向方向的切割深度在昌马盆地西侧发生了显著的降低,与阿尔金断裂带相对应的电性边界在这里向南偏移了约15 km,对应F18断裂,并与昌马盆地相接.祁连山北部的断裂带,包括昌马断裂、旱峡—大黄沟断裂总体呈现出低角度南倾的样式,切过高阻异常体的顶部.虽然昌马盆地可以起到连接断裂带的阶区的作用,将部分阿尔金断裂的走滑分量转移到盆地南侧的昌马断裂上,但是昌马断裂的走滑速率从西向东是增加的,东侧的走滑速率甚至大于阿尔金断裂沿走向方向的流失分量.我们认为在青藏高原北部主要断裂带的活动还是受印度—欧亚板块碰撞引起的远程挤压效应的影响,包括阿尔金断裂以及祁连山内部系列断层都处于斜向挤压应力环境.在这种基本构造模式下,阿尔金断裂、断裂F18、昌马盆地、昌马断裂构成了一个局部的走滑速率分解-转换-吸收体系,对局部应力状态产生影响.     

Southeastern extension of the Red River fault zone (RRFZ) and its tectonic evolution significance in western South China Sea

The tectonic evolution features in the western South China Sea (SCS) are directly related to the Tethys tectonic province. The Red River fault zone (RRFZ) comprises a large part of the Tethys tectonic province and is the boundary between the Europe Block and the India-Asia Block[1]. It serves as the contact between the uplift of the Qinghai-Tibet Plateau and the SCSopening. The RRFZ, which is an important dividing line in the geology of the SE Asia, is about 1000 km long in the co…     

Cenozoic structural deformation and expression of the “Tan-Lu Fault Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province, China

Based on the interpretation of 3D seismic data and structural mapping we analyzed the geometry and kinematics of the fault system and validated the expression of the “Tan-Lu Fracture Zone” in the West Sag of Liaohe Depression, Bohaiwan basin province. The Cenozoic structural deformation within the West Sag of Liaohe Depression can be divided into extensional structure system and dextral structure system. The extensional system is constituted by numerous NNE-NE trending Paleogene normal faults, where the Taian-Dawa fault (F1) is the master boundary fault (MBF) dominating the deposition during Paleogene so that the sag shows a complex half-graben with “boundary fault in the east and overlap in the west”. The dextral system is constituted by 2–3 dextral basement faults in NNE-NE trending (F2, F3, F4) and associated structure, and the time of structural action started in Oligocene and continued to Quarternary so that some associated secondary faults of the dextral system cut off the Neogene and Quaternary. Under the influence of the position and attitude of NNE-NE trending basement strike-slip faults, the central north part and the south part of the West Sag show obviously different structural features. The former appears to be a complex “graben” structure limited by the reversed strike-slip fault in the west and bounded by the inverted normal fault in the east, the latter remains the complex half-graben structure with “boundary fault in the east and overlap in the west”, and the graben was mildly reconstructed by one or two normal strike-slip faults. The dextral system within the West Sag is the element of the west branch fault of the Tan-Lu Fracture Zone, which is a deep fracture zone extending along the east of the Liaodongwan Gulf. The deep fracture zone branches off into two separate faults within the Liaohe Depression. The east branch goes through from northern part of the Liaodongwan Gulf to the East Sag of Liaohe Depression and links with the Denghua-Mishan Fault near Shenyang, and the west branch passes from northern part of the Liaodongwan Gulf to the West Sag and Damintun Sag of Liaohe Depression and links with the Yilan-Yitong Fault. The principal displacement zone of the west branch of the Tan-Lu Fracture Zone cuts off the master extensional fault (F1) within the West Sag of Liaohe Depression and induces many cover faults in EW trending within the Neogene and Quaternary.     

华南上地壳速度分布与基底、盖层构造研究

对华南地区有代表性的几条宽角地震剖面进行了研究,利用初动到时资料拟合剖面地带地壳上部详细的速度分布,结合其他地球物理资料与地质资料对地壳基底和沉积盖层的构造进行了综合解释. 结果表明,浙-闽-粤东部地区在地壳基底上分布一系列中生代火山岩断陷盆地,火山岩盖层厚度变化为1000-4000m. 浙西-皖南以及湘-赣地区地壳基底起伏较大,盖层主要为古生界,并发育许多受基底形态与边界断裂控制的小型中生代白垩纪盆地. 华南西部的楚雄盆地为一构造复杂的深坳陷,其中侏罗-白垩系的厚度超过10km,并被分割为东部斜坡和西部坳陷两个单元,而西部坳陷又被一中央隆起分割为东、西两个更次级的凹陷. 区内一些主要的断裂构造在速度等值线图上均有明显的反映,如东部的江绍断裂、莲花山断裂和吴川-四会断裂以及西部的程海断裂和绿汁江断裂都是重要的构造分界,此外众多的基底断裂多是盆地与隆起的边界.     

Evolution of fault geometry and development of strike-slip basins: Comparative studies on the transform zones in Turkey and Japan

Abstract Although the origins of pull-apart basins and push-up bulges have been discussed by numerous geologists, no discussion has been held on the development process of the basins based on recent active traces and Quaternary chronology. The author has investigated recent fault-active traces and fault topography in the Havza-Ladik, Erbaa-Niksar, Susehri-Golova and Erzincan sedimentary basins along the North Anatolian fault in northern Turkey and the Suwa basin along the Itoigawa-Shizuoka tectonic line (fault system) in central Japan. As a result of this investigation, the locations and sense of deformation of recent active traces seldom coincide with topographic scarps along basin margins in the studied basins. The fault traces have migrated from the basin margins to the center of the basins and become straight. Because of this migration, jogs are extinguished and basins stop subsiding as time passes. Fault topography formed by a strike-slip fault has a certain life span, and the life span is in proportion to the size of the topography. Fault topography formed by various sizes of jogs of a strike-slip fault is formed and extinguished in the corresponding time range, and this extinction is repeated in the course of migration of fault traces.