Provenance, tectonics and palaeoclimate of Proterozoic Chandarpur sandstones, Chattisgarh basin: A petrographic view

Sandstones of early Neoproterozoic Chandarpur Group, Chattisgarh Supergroup, central India display progressive change towards greater textural and mineralogical maturity from base to top of the succession. The clay-silt matrix decreases, sorting of sand grains improves, frequency of rounded grains increases, monocrystalline quartz content increases with concomitant decrease in polycrystalline quartz, feldspar and rock fragments. The trend of variations in different mineralogical and textural attributes, however, exhibits inflections at different stratigraphic levels. The sandstones of the basal Lohardih Formation are alluvial fan deposits, characterized by high matrix and feldspar content, iron-oxide impregnated highly angular grains and poor sorting. Petrographic properties collectively indicate that the sandstones were derived from a weathered granitic crust under a humid climatic condition. Abundance of well rounded grains within the alluvial fan and overlying braided fluvial deposit indicates prolonged wind action during episodes of high aridity. The shallow marine deposit overlying the fluvial deposits in the upper part of the Lohardih Formation exhibits bed-to-bed variation in the frequency of angular grains, feldspar content and overall maturity suggesting environmentally controlled segregation of sediments. The abrupt appearance of coarse-grained immature sandstones with concomitant reappearance of iron-oxide impregnated/altered feldspar grains in the upper part of the shelf deposits of the Chaporadih Formation point to a phase of tectonic uplift that possibly triggered a regression. Continued regression and peneplanation heralded the deposition of supermature medium-grained purple quartzarenite of the upper shoreface Kansapathar Formation in the uppermost part of the Chandarpur succession under a hot desertic climatic condition. The provenance analysis revealed that the Chandarpur clastics were derived from granites and granite-gneisses of a continental block tectonic provenance. Petrographic studies further indicate that high grade metamorphic rocks did not make any perceptible contribution to the Chandarpur system. The Eastern Ghats Granulite Belt apparently did not emerge till the early Neoproterozoic.     

Variscan geodynamic evolution of the Carnic Alps (Austria/Italy)

The South-Alpine Carnic Alps are part of the southern flank of the European Variscides and display a continuous sedimentary record from Late Ordovician to Devonian times followed by Carboniferous S-directed nappe stacking and Late Carboniferous to Early Permian post-collisional collapse. The tectonometamorphic and sedimentary evolution of the Carnic Alps resembles a continuous process where pre- and syn-orogenic volcanism, syn-orogenic flysch sedimentation, deformation including nappe stacking, metamorphism and tectonic collapse shift in age from internal zones in the N towards external zones in the S. New structural, petrological and sedimentological data are presented concerning the tectonometamorphic history of the Carnic Alps. We distinguish three thrust sheets or tectonic nappes differing in their stratigraphic, sedimentological, deformational and metamorphic histories which were thrust over each other in Carboniferous times. Our data lead to a new geodynamic model showing an evolution from rifting or back-arc spreading in the Late Ordovician to the establishment of a mature passive continental margin in the Late Devonian/Early Carboniferous, flysch sedimentation in an active continental margin setting during the Visean/Namurian and finally collision during the Late Carboniferous between the northern margin of Gondwana and a microcontinent to the N.     

Fusulinid biostratigraphy of the Lower Permian Zweikofel Formation (Rattendorf Group; Carnic Alps,Austria) and Lower Permian Tethyan chronostratigraphy

The Zweikofel Formation of the Rattendorf Group in the Carnic Alps (Austria) is 95–102 m thick and consists of a cyclic succession of thin‐ to thick‐bedded fossiliferous limestone and intercalated thin intervals of siliciclastic sediment. The siliciclastic intervals were deposited in a shallow marine nearshore environment. The variety of carbonate facies indicates deposition in a shallow neritic, normal‐saline, low‐ to high‐energy environment. The Zweikofel Formation is characterized by a paracyclic vertical arrangement of facies and represents sedimentary sequences that are not well understood elsewhere in the Tethys. Fusulinids and conodonts from the upper Grenzland and Zweikofel formations in the Carnic Alps clearly suggest that what has been called ‘Sakmarian’ in the Tethys includes both the Sakmarian and Artinskian stages of the Global Time scale. Fusulinids from the lower part of the Zweikofel Formation at Zweikofel closely resemble those of the Grenzland Formation and approximately correlate with the upper part of the Sakmarian and lower part of the Artinskian of the Global Time scale. The upper part of the Zweikofel Formation correlates approximately with the lower‐middle (?) parts of the Artinskian Stage of the Global Time scale. A new regional Hermagorian Stage of the Tethyan scale is proposed between the Asselian and Yakhtashian. The lower boundary of the Hermagorian Stage is proposed to be located at the base of bed 81 in the 1015 section of Darvaz (Tadzhikistan). The boundary between the Hermagorian and Yakhtashian stages is placed at the base of bed 73 in the Zweikofel section at Zweikofel, Carnic Alps. In the Darvaz region, Tadzhikistan, the type area for the Yakhtashian Stage, this boundary has never been precisely defined. The entire fusulinid assemblage of the upper part of the Grenzland and Zweikofel formations reported herein includes 62 species of 18 genera, of which one subgenus and 12 species and subspecies are new. Copyright © 2012 John Wiley & Sons, Ltd.     

Geophysical investigations of large landslides in the Carnic Region of southern Austria

The area under investigation for the past two decades is in the vicinity of the Gailtal lineament, which is the most dominant tectonic feature of the eastern Alps of southern Austria. An area of about 8 km² is in a state of constant instability, as documented by movement of road tracks of several centimetres per year. Geotechnical and surveying techniques have been used to measure these movements in the past but without solving the problem of the mechanism of these failure processes. Geophysical methods (seismic refraction, geoelectrics, and electromagnetics) were applied in order to determine the validity of one of the discussed movement models. In-situ velocity measurements were used to identify different lithologies beneath surficial talus deposits. The thickness of these talus deposits, of about 4–30 m, found by seismic refraction clearly demonstrates that huge ‘blocks’ (i.e. more or less undisturbed lithologic units) within the talus/debris are in close contact with the basement. This basement, which shows lower seismic velocities in different parts combined with low electric resistivities, is obviously strongly disturbed by different failure surfaces. The different gliding velocity of the blocks and the talus/debris deposits leads to a geological model in which huge rock blocks move slowly in relation to the disintegrating basement, whereas the talus/debris deposits move over the surface of these blocks at a higher velocity. The interpretation of these landslide studies is not a straightforward analysis. It is a complex problem with a complex solution, including all information from geotechnical, geophysical, and surveying investigations.     

Carbonate-hosted siliceous crust type mineralization of Carnic Alps (Italy-Austria)

A carbonate-hosted stratabound siliceous crust type (SCT) mineralization (base metal sulphides, barite, fluorite) occurs over large areas of Carnic Alps and Karawanken in the Eastern Alps. It concerns a pervasively silicified lithological unit, up to some tens of metres thick, which caps the unconformity landscapes developed on epicontinental Devonian–Dinantian carbonates. The SCT mineralization is directly overlaid by different transgressive siliciclastic sediments, which range from Lower Carboniferous to Lower Permian. The presence of fragments of the SCT mineralization in the transgressive siliciclastic sediment bounds its whole lithological evolution within a short stratigraphic interval of Lower Carboniferous age. Selected features of the regional and lithostratigraphic setting are discussed. The chemical characterisation is based on the statistical evaluation of compositional data of 581 selected samples. Three significant groups of elements have been distinguished: (1) the hydrological and metasomatically active elements (Si, Ba, F), which show a strong negative correlation amongst themselves and characterise the silica-saturated aqueous solutions; (2) the terrigenous elements (Al₂O₃, K₂O, Fe_tot, TiO₂, B, Be, Ce, La, Nb, V, Y, Zr), which suggest a continental margin environment for silica deposition; (3) the sulphide metals (Cu, Pb, Zn, Ni, Sb, As, Hg, Cd), which define the metalliferous signature of the SCT mineralization.Some consistent, but still debatable genetic aspects of the SCT mineralization are as follow: (1) silica may be supplied by illitization of clay-rich basinal sediments during their diagenesis. δ¹⁸O of microcrystalline quartz ranges from +18.5‰ and +24.6‰ and is very similar to δ¹⁸O of authigenic quartz deriving from diagenetic processes of illitization of clay-rich basinal sequences. (2) The diagenetic evolution of these sediments may trigger off the movement of silica-rich marine pore waters. δ³⁴S of barite ranges from +15.5‰ to +19.3‰ with an average of +17.7‰ and are in good agreement with δ³⁴S of sulphate in ocean waters of Upper Devonian–Lower Carboniferous age. (3) A convective hydrological system, connected with sinsedimentary transtensive tectonics, active in the Carnic Alps since the Frasnian, may be the transport mechanism of aqueous solutions. (4) A weak drop in pH in the dominant carbonate environment represents the conditions for silica precipitation.SCT mineralization, showing persistent, independent and distinct characters, occurs over large areas also in other sites of the Alpine belt and outside Italy and Austria. Therefore, it points to important markers for some sedimentary sequences as well as to a worldwide significant cyclic metallogenic event. It represents a new ore deposit-type within the carbonate-hosted mineralization.     

Provenance of late Palaeozoic metasediments of the Patagonian proto-Pacific margin (southernmost Chile and Argentina)

In this provenance study of late Palaeozoic metasediments of the Eastern Andean Metamorphic Complex (EAMC) along the south Patagonian proto-Pacific margin of Gondwana, the palaeogeological setting of the continental margin in Devonian–Carboniferous and Permian times is reconstructed. The study is based on detrital heavy mineral contents, chemical compositions of tourmaline grains, and whole rock element and Nd-Sr isotopic compositions. Element and isotopic compositions reveal that Devonian–Carboniferous metaturbidites deposited before the development of a Late Carboniferous–Permian magmatic arc along the margin were mainly fed from felsic, recycled, old continental rocks. The last recycling phase involved erosion of metasediments that were exposed in Patagonia. Feeder systems to the basin cut either through epidote-rich or garnet-rich metasediments. In Permian time, EAMC metaturbidites were deposited next to the evolving magmatic arc and were derived from felsic, crustal rocks. Two provenance domains are recognised. The metasediments of the northern one are chemically similar to those of the Devonian–Carboniferous metasediments. This domain was fed from the metasedimentary host rocks of the magmatic arc. The southern domain probably was fed from the arc proper, as indicated mainly by the dominance of metaplutonic lithic fragments, abundant detrital biotite, and the major element composition of the metasediments.     

Exhumed fault-bounded Alpine blocks along the Periadriatic lineament: the Eder unit (Carnic Alps, Austria)

The Eder unit in the Carnic Alps, which is situated immediately south of the Periadriatic lineament (PL), represents a fault-bounded block consisting of a low-grade (up to 400?°C, indicated by epizonal illite “crystallinity” values, recrystallized quartz, and non-recrystallized white mica) metamorphic Paleozoic metasedimentary sequence. Until now, it has been assumed to represent a separate Variscan nappe. The rocks of the Eder unit show a strong E- to W-oriented stretching lineation on steep foliation planes (D₁) subparallel to the PL. D₁ structures originated near the temperature peak of metamorphism, and shear sense indicators show dextral ductile shear parallel to the PL. Tight mesoscale D₂ folds formed on the cooling path. K–Ar and Ar–Ar ages from newly formed white mica cluster around 32–28 and 18–13 Ma and suggest a two-stage Tertiary history of the Eder unit. We interpret the Eder unit as a fault-bounded block formed during Oligocene large-scale dextral shearing along the PL (near T_max) and exhumed in mid-Miocene times during another phase of activity along the PL. Its nature as a separate Variscan nappe is questioned.     

Susceptibility analysis for slides and rockfall: an example from the Northern Calcareous Alps (Vorarlberg, Austria)

In this paper a tool for semi-quantitative susceptibility assessment at a regional scale is presented which is applicable at areas with complex geological setting. At a study area within the Northern Calcareous Alps geotechnical mappings were implemented into a Geographical Information System and analysed as grid data with a cell size of 25 m. The susceptibility to sliding and falling processes was considered according to five classes (very low, low, medium, high, very high). Susceptibility to sliding was analysed using an index method. The layers of lithology, bedding conditions, tectonic faults, slope angle, slope aspect, vegetation and erosion were combined iteratively. Dropout zones of rockfall material were determined with help of a Digital Elevation Model. The movement of rolling rock samples was modelled by a cost analysis of all potential rockfall trajectories. These trajectories were also divided into five susceptibility classes. The susceptibility maps are presented in a general way to be used by communities and spatial planners. Conflict areas of susceptibility and landuse were located and can be presented destinctively.     

The Bocchigliero Palaeozoic sequence in the context of the Calabrian–Peloritan Hercynian Range (Italy)

The Calabrian–Peloritan Hercynian Range includes three weakly metamorphosed Palaeozoic sequences cropping out in north-eastern Sila (Bocchigliero sequence), southern Sila, Serre and Aspromonte (Stilo sequence), and in the Peloritan Mountains (Peloritan sequence). The work reported here considers the Bocchigliero sequence and comprises part of a geological, petrological and geochemical research programme on the Palaeozoic evolution of the Calabrian–Peloritan Arc. The Bocchigliero sequence constitutes the lower tectonic unit of the Hercynian Caiabrian–Peloritan Range and is overthrusted by the metamorphic Mandatoriccio Unit. The Bocchigliero sequence is a terrigenous–carbonate–volcanic association, is affected byclow grade metamorphism, contains Cambro-Ordovician fossils and extends in age from the Cambrian to the Devonian. The terrigenous material is represented by meta-arenites and metapelites (Cambrian–Devonian); the volcanics include metatuffites (Cambrian and Ordovician), metabasalts (Cambro-Ordovician), metaandesites and metarhyolites (Ordovician and Siluro-Devonian); limestone beds are present in the Devonian. It is believed that the Palaeozoic Bocchigliero basin formed in the Cambrian on a continental crust in which the rocks constituting today's Mandatoriccio Unit were located at 3–8 km depth. The crustal thinning in the Cambro-Ordovician led to fracturing and upwelling of alkaline within-plate basaltic magmas, whereas in the Ordovician the thinning took place under conditions of higher plasticity. In this latter period an increase in temperature resulting from mantle upwelling produced crustal partial melts of andesite and rhyolite composition. In addition, this thermal uprise was responsible for regional metamorphism characterized by low pressures and by the absence of penetrative deformation. The effects of this metamorphism are well developed in the rocks of the Mandatoriccio Unit. In the Silurian and Devonian, progressive closing of the basin took place. The Palaeozoic sequence was then subjected to Variscan low pressure–low temperature metamorphism and Alpine deformation.     

Contrasting thermomechanical evolutions in the Southalpine metamorphic basement of the Orobic Alps (Central Alps, Italy)

In the Southern Alps a progressive metamorphic zonation, with an increase in the geothermal gradient from NE to SW, has been widely proposed. However, recent investigations have shown that the greenschist metamorphic imprint of the low-grade zone corresponds to a metamorphic retrogression following amphibolite facies conditions. On the other hand, in the medium-grade zone, a later low-pressure, high-temperature (LPHT) metamorphic event has also been proposed. In an attempt to resolve these different interpretations, new petrological and partly new structural data have been obtained for two sectors of the Orobic Alps, traditionally attributed to different metamorphic zones. Thermobarometric determinations, supported by microstructural analysis, indicate the following different pressure-retrograde paths in each sector: (1) in the Val Vedello basement (VVB) rocks, a first metamorphic imprint characterized by P = 7–9 kbar and T = 570–610°C was followed by a greenschist retrogression ( P ≤ 4 kbar and T ≤ 500° C); (2) in the Lario basement (LB) rocks, the first detectable metamorphic stage, characterized by mineral assemblages indicating P = 7–9 kbar and T = 550–630° C, was followed by a LPHT event, synkinematic with F2 extensional deformation. A greenschist retrogression marks the final uplift of these rocks.
Reinterpretation of the available geochronological data indicates a diachronism for the two thermomechanical evolutions. In the light of these data, we interpret the retrograde P–T–t path of the VVB rocks as a pre-Permian post-thickening uplift and the retrograde P–T–t evolution of the LB rocks as a Permo-Mesozoic uplift related to the extensional tectonic regime of the Tethyan rifting.     

Late Cretaceous to Early Tertiary palaeogeography of the Western Carpathians (Slovakia) and the Eastern Alps (Austria): implications from heavy mineral data

The Late Cretaceous Brezová and Myjava Groups of the Western Carpathians in Slovakia and formations of the Gosau Group of the Northern Calcareous Alps in Lower Austria comprise similar successions of alluvial/shallow marine deposits overlain by deep water hemipelagic sediments and turbidites. In both areas the heavy mineral spectra of Late Cretaceous sediments contain significant amounts of detrital chrome spinel. In the Early Tertiary the amount of garnet increases. Cluster analysis and correspondence analysis of Coniacian/Santonian and Campanian/Early Maastrichtian heavy mineral data indicate strong similarities between the Gosau deposits of the Lunz Nappe of the north-eastern part of the Northern Calcareous Alps and the Brezova Group of the Western Carpathians. Similar source areas and a similar palaeogeographical position at the northern active margin of the Adriatic/Austroalpine plate are therefore suggested for the two tectonic units.Basin subsidence mechanisms within the Late Cretaceous of the Northern Calcareous Alps are correlated with the Western Carpathians. Subsidence during the Campanian-Maastrichtian is interpreted as a consequence of subduction tectonic erosion along the active northern margin of the Adriatic/Austroalpine plate. Analogous facies and heavy mineral associations from deep water sandstones of the Manin Unit and the Klape Unit indicate accretion of parts of the Pieniny Klippen Belt during the Late Cretaceous along the Adriatic/Austroalpine margin.     

Provenance of Oligocene synorogenic sediments of the Ligurian Alps (NW Italy): inferences on belt age and cooling history

Mineral chemistry, ⁴⁰Ar/³⁹Ar geochronology on white micas and Apatite Fission Track Thermochronology (AFTT), are applied here to study the provenance of the synorogenic Molare Formation (lowermost unit of the Tertiary Piedmont Basin clastic sequence). The Molare Formation was deposited during transgression onto the Ligurian Alps nappe stack in the Early Oligocene. Depositional facies show that clastic distribution remained transversal, with local sources located just landward from the coastline. Phengite mineral chemistry together with ⁴⁰Ar/³⁹Ar data clearly shows two distinctive source areas, each one mirroring the composition of the basement directly beneath the clastic sequence. Amphibole mineral chemistry allows second order provenance distinctions within each sector, reflecting heterogeneous metamorphic evolution of the bedrock complexes. Integrated ⁴⁰Ar/³⁹Ar dating and AFTT suggest that, following a fast cooling/exhumation episode of the Ligurian Alps during the Oligocene, very little net uplift has since occurred. This is due to a period of general subsidence from the Oligocene–Late Miocene followed by comparable uplift from Late Miocene–Pliocene to the present. In general our data provide an image of the Ligurian Alps during the Oligocene, which is very similar to the present-day one.This revised version was published online in September 2003.     

The Neogene Fohnsdorf Basin: basin formation and basin inversion during lateral extrusion in the Eastern Alps (Austria)

The evolution of the early/middle Miocene Fohnsdorf Basin has been studied using borehole data, reflection seismic lines, and vitrinite reflectance. The basin is located along the sinistral Mur-Mürz fault system and probably formed as an asymmetric pull-apart basin, which was subsequently modified by halfgraben tectonics, as a consequence of eastward lateral extrusion. Sedimentation started with the deposition of fluvio-deltaic sediments. Thick coal accumulated in the northwestern basin. Thereafter subsidence rates increased dramatically with the formation of a lake several hundred meters deep. The lake was filled mainly from the north with more than 1500?m of sediments showing a coarsening-upward trend due to southward prograding deltaic lobes. A sequence of more than 1000?m of boulder gravels (Blockschotter) in the southeastern part of the basin are interpreted as the upper part of a coarse-grained fan delta succession, which accumulated along a normal fault along the southern basin margin. Fan deltas reached the central basin only during the early stages of sedimentation and during the late stages of basin formation. Miocene heat flow was approximately 65–70?mW/m², which is significantly lower than in other basins along the Mur-Mürz fault system. The present-day southwestern basin margin is a recent feature, which is related to transpression along the dextral Pöls-Lavanttal fault system. It is formed by reverse faults constituting the northeastern part of a flower structure. Miocene sediments in the Feeberg valley are preserved along its southwestern part. Uplift of the central part of the flower structure was at least 2.4?km. North–south compression resulted in the deformation of the basin fill, uplift of the E/W-trending basement ridge separating the Fohnsdorf and Seckau basins, and in the erosion of 1750?m of sediments along the northern basin margin.     

Understanding the pre-Variscan and Variscan basement components of the central Tauern Window, Eastern Alps (Austria): constraints from single zircon U-Pb geochronology

New single-grain and within-grain U-Pb zircon ages from the central Tauern Window help sorting out the time dimension among the various Variscan and pre-Variscan basement components that were strongly overprinted by Alpine orogeny. Single-grain isotope dilution (ID-TIMS) U-Pb zircon geochronology of three Basisamphibolit samples yield protolith formation ages of 351±2, 349±1 and 343±1 Ma. Laser ablation ICP-MS and ID-TIMS U-Pb detrital zircon dating of the Biotitporphyroblastenschiefer constrained the maximum time of sedimentation to between 362±6 Ma and 368±17 Ma. Paragneisses from the Zwölferzug yield maximum sedimentation ages from 345±5 Ma (ion microprobe data) to 358±10 Ma. Zircons from gabbroic clasts and detrital zircons from a meta-agglomerate from the Habach Phyllite give an upper intercept age of 536±8 Ma and a near-concordant age of 506±9 Ma, respectively. Hence, apart from the Habach Phyllite, the maximum sedimentation ages of the metasediments investigated range from Upper Devonian to Lower Carboniferous. Consequently, the Basisamphibolit, the Biotitporphyroblastenschiefer, and the paragneisses of the Zwölferzug form parts of the Variscan basement series. The Basisamphibolit (351-343 Ma) is distinct both in space and time of formation from the Zwölferzug garnet amphibolite (c. 486 Ma), which forms part of the pre-Variscan basement.     

Late Neogene–Quaternary evolution of the intermontane Clusone Basin (Southern Alps,Italy): integration of seismic and geological data

In the Clusone Basin (a large intermontane basin filled by thick late Neogene–Quaternary sediments in the Middle Val Seriana, Southern Alps), two high‐resolution seismic profiles have been acquired in order to reconstruct the geometries of the sediments that fill the depression, with a maximum thickness of more than 200 m as documented by available well data, and to define their relationships with the bedrock, consisting of Late Triassic carbonates. In addition to standard seismic reflection processing, a seismic refraction inversion technique has been applied. The integration of geological (both surface and well data) and seismic data indicates a complex history of the drainage patterns of the Clusone Basin, documenting a shift of the Serio River from a palaeodrainage toward the southeast (Val Borlezza) to the present situation, toward the south (Val Seriana): between the older and the present‐day drainages an important depositional stage occurred, as documented by the thick sediments that fill the Clusone Basin, controlling the capture of the Serio River along the Val Seriana. Copyright © 2004 John Wiley & Sons, Ltd.     

Focal mechanism inversion in the Giudicarie–Lessini seismotectonic region (Southern Alps, Italy): Insights on tectonic stress and strain

A set of 41 focal mechanisms (1989–2006) from P-wave first polarities is computed from relocated seismic events in the Giudicarie–Lessini region (Southern Alps). Estimated hypocentral depths vary from 3.1 to 20.8 km, for duration magnitudes (M_D) in the range 2.7–5.1. Stress and strain inversions are performed for two seismotectonic zones, namely G (Giudicarie) and L (Lessini). This subdivision is supported by geological evidence, seismicity distribution, and focal mechanism types. The available number of data (16 in G, 22 in L) does not make possible any further subdivisions. Seismotectonic zones G and L are undergoing different kinematic regimes: thrust with strike-slip component in G, and strike-slip in L. Principal stress and strain axes in each sub-region show similar orientations. The direction of maximum horizontal compressive stress is roughly perpendicular to the thrust fronts along the Giudicarie Belt in zone G, and compatible with right-lateral strike-slip reactivation of the faults belonging to the Schio-Vicenza system in zone L. On the whole, kinematic regimes and horizontal stress orientations show a good fit with other stress data from focal mechanisms and breakouts and with geodetic strain rate axes.     

The Central Southern Alps (N. Italy) paleoseismic zone: a comparison between field observations and predictions of fault mechanics

The internal sectors of the Orobic Alps (Northern Italy) are characterised by Alpine age regional shortening showing a transition, through time, from plastic to brittle deformation. Thrust faults cut Alpine ductile folds and are marked by cataclasites and, locally, by pseudotachylytes, suggesting that motion was accommodated by seismic frictional slip. In the Eastern Orobic Alps the thrusting initiated at depths deeper than 10 km (the emplacement depth of the Adamello pluton) and possibly continued at shallower depths. This demonstrates that thrust motion occurred between 10 km depth and the brittle-ductile transition, i.e., at mid-crustal depths. The Orobic Alps exhumed paleoseismic zone shows different geometries along strike. In the central sectors of the Orobic Alps, thrust faults, associated with pseudotachylytes, have average dips around 40° and show no pervasive veining. Much steeper thrusts (dips up to about 85°) occur in the eastern Orobic Alps. In this area, faults are not associated with pervasive veining, i.e., fluid circulation was relatively scarce. This suggests that faulting did not occur with supralithostatic fluid pressure conditions. These reverse faults are severely misoriented (far too steep) for fault reactivation in a sublithostatic fluid pressure regime. We suggest that thrust motion likely started when the faults were less steep and that the faults were progressively rotated up to the present day dips. Domino tilting is probably responsible for this subsequent fault steepening, as suggested by a decrease of the steepness of thrust faults from north to south and by systematic rotations of previous structures consistently with tilting of thrust blocks. When the faults became inclined beyond the fault lock-up angle, no further thrusting was accommodated along them. At later stages regional shortening was accommodated by newly formed lower angle shear planes (dipping around 30–40°), consistently with predictions from fault mechanics.     

Multistage dolomitization and distribution of dolomitized bodies in Early Jurassic carbonate platforms (Southern Alps,Italy)

The Early Jurassic dolomitized carbonates are a hydrocarbon exploration target in Northern Italy. Of these carbonates, the Liassic Albenza Formation platform and the overlying Sedrina Formation shelf were studied to define a pervasive dolomitization model and to shed light on dolomite distribution in the sub‐surface. Field work, as well as analyses of well cores, stable isotopes, trace elements and fluid inclusions, was carried out on the outcropping thrust belt and sub‐surface deformed foreland of the Southern Alps. Petrographic analyses showed a first, pervasive, replacement dolomitization phase (D1) followed by volumetrically less important dolomite cement precipitation phases (D2, D3 and D4). The δ¹⁸O values fall between ?8·2‰ and 0·1‰ Vienna‐Pee Dee Belemnite with the more depleted samples belonging to dolomite cement‐rich dolostones; the δ¹³C ranges from 2·6‰ to 3·7‰ Vienna‐Pee Dee Belemnite. Analysis of trace elements showed different Fe and Mn contents in the sub‐surface and outcropping dolostones, and a higher Fe in the younger dolomite cements. An increase in the precipitation temperature (up to 130 °C from fluid inclusion data) and a decrease in diagenetic fluid salinity (from sea water to brackish) are observed from the first pervasive replacement dolomite to the dolomite cement phases. Field observations indicate that, in the Albenza Formation, dolomitization was limited to palaeohighs or faulted platform margins in the Early Jurassic carbonates. The pervasive replacement phase is interpreted based on a ‘compaction model’; the formation fluids expelled from compacting basinal carbonates could have funnelled along faults into permeable palaeohighs. The high homogenization temperature of the dolomite cements and decreased salinities indicate precipitation at great depth with an influx of meteoric water. These data, along with the thermal history, suggest that the dolomite cements precipitated according to the ‘tectonic squeegee’ dolomitization model. The dolomite precipitation temperature was set against the thermal history of the carbonate platform to interpret the timing of dolomite precipitation. The dolomite precipitation temperatures (90 to 100 °C) were reached in the studied formations first in the thrust fold belt (Early Tertiary, 60 Ma), and then in the foreland succession during the Late Tertiary (10 Ma). This observation suggests that the dolomite precipitation fronts moved southwards over time, recording a ‘diagenetic wave’ linked to the migration of the orogenic system. Observations suggest that the porosity increased during the first phase of replacement dolomitization while the dolomite cementation phases partially occluded the pores. The distribution of porous dolomitized bodies is therefore linked to the ‘compaction dolomitization’ model.     

From source terrains of the Eastern Alps to the Molasse Basin: Detrital record of non-steady-state exhumation

Fission-track cooling ages of detrital apatite (AFT) in the East Alpine Molasse Basin display age groups corresponding to geodynamic events in the orogen since Jurassic times. These age groups are typical of certain thermotectonic units, which formed a patchwork in the Swiss and Eastern Alps. By a combination of petrographic and thermochronologic data, progressive erosion of source terrains is monitored in different catchments since the Oligocene. The AFT cooling ages show a decrease in lag time until when rapidly cooled debris derived from tectonically exhumed core complexes became exposed. After termination of tectonic exhumation, lag times of debris derived from the core complexes increased. Neither on the scale of the entire Eastern Alps, or on the scale of individual catchments, steady-state exhumation is observed, due to the highly dynamic changes of exhumation rates since Late Eocene collision.     

Planktonic foraminiferal turnover across the Cretaceous-Tertiary boundary in the Vajont valley (Southern Alps, northern Italy)

Planktonic foraminiferal analysis of the Erto section in the Vajont valley (Southern Alps, northern Italy) reveals a relatively complete succession across the Cretaceous–Tertiary (K–T) boundary. The turnover of planktonic foraminiferal fauna was studied for a stratigraphic interval spanning theAbathomphalus mayaroensisZonep.p., Pseudotextularia deformisZone,Guembelitria cretaceaZone,Parvularugoglobigerina eugubinaZone,Eglobigerina eobullioidesSubzone, andParasubbotina pseudobulloidesZonep. p.The extinction of most large, ornate, late Maastrichtian species occurs below a black ‘boundary clay’ (2–4 cm thick); however, part of the Late Cretaceous species, mainly heterohelicidids and hedbergellids, were found over an interval of more than 100 cm above the boundary. Although a relatively high number of species occur for the last time in the main extinction phase, the abundance of these outgoing species is less than 20% of the total population; unkeeled or weakly keeled, simple-shaped forms (heterohelicids, globotruncanellids, hedbergellids) constitute the bulk of the planktonic foraminiferal population both in uppermost Maastrichtian and lowermost Danian beds. The first Tertiary species (‘Globigerina’minutulaand ‘Globigerina’fringa) appear just above the ‘boundary clay’;Parvularuglobigerina eugubinaoccurs a few centimeters above. A marked increase in abundance and diversity in the Tertiary planktonic foraminiferal population occurs at the base of theEoglobigerina eobulloidesSubzone.