一种适用于小入射角条件下的白冠海面后向散射模型

本文提出了一种白冠海面的小入射角星载雷达后向散射模型,模型包括海面非波浪破碎部分和波浪破碎部分的后向散射.在风的作用下,海浪破碎形成白冠,对星载雷达的后向散射信号造成影响.文中利用热带降雨测绘任务卫星搭载的降雨雷达(TRMM PR)和欧洲中期天气预报中心(ECMWF)的时空匹配数据集,拟合得出小入射角下星载雷达海面波浪...     

一种分层海底反向散射模型

In order to predict the bottom backscattering strength more accurately, the stratified structure of the seafloor is considered. The seafloor is viewed as an elastic half-space basement covered by a fluid sediment layer with finite thickness. On the basis of calculating acoustic field in the water, the sediment layer, and the basement, four kinds of scattering mechanisms are taken into account, including roughness scattering from the water-sediment interface, volume scattering from the sediment layer, roughness scattering from the sediment-basement interface,and volume scattering from the basement. Then a backscattering model for a stratified seafloor applying to low frequency(0.1–10 kHz) is established. The simulation results show that the roughness scattering from the sediment-basement interface and the volume scattering from the basement are more prominent at relative low frequency(below 1.0 kHz). While with the increase of the frequency, the contribution of them to total bottom scattering gradually becomes weak. And the results ultimately approach to the predictions of the high-frequency(10–100 kHz) bottom scattering model. When the sound speed and attenuation of the shear wave in the basement gradually decrease, the prediction of the model tends to that of the full fluid model, which validates the backscattering model for the stratified seafloor in another aspect.     

海洋二号卫星微波散射计后向散射系数业务化面元匹配算法

本文提出了一种可业务化运行的海洋二号卫星散射计面元匹配方法,该算法主要用于将按时序排列的后向散射系数及相关参数投影到相应风矢量单元。面元匹配方法主要包括地面网格划分和后向散射系数观测结果重采样两个关键步骤。为简化计算,本文采用了以星下点轨迹为中心,以顺轨向及交轨向为坐标轴的地面网格划分方式。在重采样过程中,本文提出了一种“三点标定”重采样方法,利用观测脉冲的地面足印中心,星下点轨迹的起点,以及过地面足印中心做星下点轨迹垂线的交点,三点形成的直角三角形来计算每个后向散射系数观测结果在地面网格中对应的坐标。该直角三角形的两直角边分别对应观测脉冲在顺轨向和交轨向的坐标。同时,为减少由于星下点数据空间分布不连续引起的面元匹配误差,在采用三点标定法进行重采样之前,首先对星下点时空分布不连续的区域对时间插值,然后以时间为坐标,对星下点经度、纬度分别进行内插。对风矢量面元位置分布和风矢量反演精度等分析表明,本文提出的面元匹配算法,可在满足高质量海面风场反演的要求。     

A simplified approach to backscattering from a rough seafloor withsediment inhomogeneities

Current models used to predict the backscattering strength of the ocean floor are either very involved, requiring geoacoustic parameters usually unavailable for the site in practical applications, or overly simplistic, relying mainly on empirical terms such as Lambert's law. In any case, solutions are very approximate and the problem is still far from being solved. In this paper, a model is presented that avoids empirical functional forms yet requires only a few physical parameters to describe the surficial sediments, often tabulated for typical sediments. The aim of this paper is to develop a simple algorithm for operational prediction of bottom reverberation with only one free parameter, i.e., the volume scattering coefficient. The algorithm combines a two scale surface scattering model with scattered contributions originating from inhomogeneities within the sediments, talking into consideration the rough interface. No specific mechanism is assumed for scattering at the volume inhomogeneities; however, the inhomogeneities are assumed to be uniform and isotropic. The volume scattering coefficient, combined with the bottom attenuation and density and referenced to the surface, plays a role similar to the Lambert's constant in empirical models. The model is exercised on a variety of published datasets for low and moderately high frequency. In general, the model performs very well for both fast and slow sediments, showing a definite improvement over Lambert's law     

A highly wave dissipation offshore breakwater

The aim of this paper is to develop an offshore breakwater, for which coefficients of both the wave reflection and transmission have low values. The breakwater is suggested to compose of n layers of porous materials with different porosities. A complex eigen function method is used in the theoretical analysis. Continuities of both mass flux and fluid pressure are assumed at interfaces between every two adjoining porous materials and at the interface between end materials and water region. Following a series of mathematical processes, the coefficients of the wave transmission and reflection along with the wave energy loss are calculated. The porosity of materials is varied in computations; and results are compared among structures composing of different layers of porous materials. A single layer offshore breakwater is shown to reduce simultaneously the coefficients of transmission and reflection only when the structure is very wide in the direction of wave propagation, and the structure material has a high porosity. A multilayer breakwater, however, can function well in reducing both coefficients at a much narrower width; structure having more layers can be more effective at narrower width. Finally, several experiments are conducted; theoretical computations and experimental results agree well.     

A method for remote detection of oil spills using laser-excited Raman backscattering and backscattered fluorescence

A laser method for the remote detection of oil present as a pollutant in the sea water using Raman backscattering and backscattered fluorescence is discussed. The scattering spectra of oils obtained by using a laser Raman spectrometer that employs a CW Ar laser are described. The backscattering spectra of oils obtained by a laser radar technique in the laboratory and the field are also described. Furthermore, theoretical performance of a laser radar with a CW laser or a pulsed laser for the detection of Raman backscattering of kerosene is discussed.     

Remote sensing of particle backscattering in Chesapeake Bay: A 6-year SeaWiFS retrospective view

Traditional field techniques to monitor water quality in large estuaries, such as boat-based surveys and autonomous moored sensors, generally provide limited spatial coverage. Satellite imagery potentially can be used to address both of these limitations. Here, we show that satellite-based observations are useful for inferring total-suspended-solids (TSS) concentrations in estuarine areas. A spectra-matching optimization algorithm was used to estimate the particle backscattering coefficient at 400 nm, b_bp(400), in Chesapeake Bay from Sea-viewing Wide-Field-of-view Sensor (SeaWiFS) satellite imagery. These estimated values of b_bp(400) were compared to in situ measurements of TSS for the study period of September 1997–December 2003. Contemporaneous SeaWiFS b_bp(400) values and TSS concentrations were positively correlated (N = 340, r² = 0.4, P < 0.0005), and the satellite-derived b_bp(400) values served as a reasonable first-order approximation for synoptically mapping TSS. Overall, large-scale patterns of SeaWiFS b_bp(400) appeared to be consistent with expectations based on field observations and historical reports of TSS. Monthly averages indicated that SeaWiFS b_bp(400) was typically largest in winter (>0.049 m⁻¹, November–February) and smallest in summer (<0.031 m⁻¹, June–August), regardless of the amount of riverine discharge to the bay. The study period also included Hurricanes Floyd and Isabel, which caused large-scale turbidity events and changes in the water quality of the bay. These results demonstrate that this technique can provide frequent synoptic assessments of suspended solids concentrations in Chesapeake Bay and other coastal regions.     

A closed-form solution to bearings-only target motion analysis

Bearings-only target motion analysis is a nonlinear state estimation problem in which the noise corrupted angle of arrival measurements of an emitted signal are used to obtain estimates of the source's range, bearing, course, and speed. The estimation process is complicated by unusual observability properties that render the quality of the estimate highly dependent on both the measurement noise levels and the source-observer geometry. Solutions that use recursive Kalman filtering approach or batch-style algorithms have been reported. The nonlinear batch style estimators for this process require iterative solution methods and under certain scenarios can be sensitive to initial conditions. Pseudolinear solutions that alleviate some of the difficulties with the iterative batch algorithms have been proposed. Although early versions of the pseudolinear filter suffered from biased estimates, subsequent improvements appear to have reduced the bias problem. This paper discusses a new pseudolinear solution based on the observable parameters from individual data segments defined by periods of constant observer velocity (termed “legs”). This solution is a true closed-form solution to the bearings-only target motion analysis problem. Although theoretically interesting, the technique does suffer under conditions of poor observability. A practical pseudolinear estimate, that does not suffer from the same observability problems, is developed and related to the first solution. Algorithm performance results, obtained from computer simulation, are presented. For the scenarios examined, the technique provides good state estimates under conditions of high observability. As observability conditions deteriorate, the solution does develop biases. However, it may still be useful for initializing an iterative nonlinear batch-style estimation algorithm     

基于等相位体概念的水下激光背向散射强度的估算方法

详细讨论了海水作为激光传输信道的基本特点,在此基础上提出了等相位体的概念,分析了等相位体的形状,并且研究了等相位体背向散射强度的估算方法,为利用伪随机序列进行水下测量或通讯获得的资料估算散射强度提供一种方法.     

A new CFAR ship target detection method in SAR imagery

Many ship target detection methods have been developed since it was verified that ship could be imaged with the space-based SAR systems. Most developed detection methods mostly emphasized ship detection rate but not computation time. By making use of the advantages of the K-distribution CFAR method and two-parameter CFAR method, a new CFAR ship target detection algorithm was proposed. In that new method, we use the K-distribution CFAR method to calculate a global threshold with a certain false-alarm rate. Then the threshold is applied to the whole SAR imagery to determine the possible ship target pixels, and a binary image is given as the preliminary result. Mathematical morphological filter are used to filter the binary image. After that step, we use the two-parameter CFAR method to detect the ship targets. In the step, the local sliding window only works in the possible ship target pixels of the SAR imagery. That step avoids the statistical calculation of the background pixels, so the method proposed can much improve the processing speed. In order to test the new method, two SAR imagery with different background were used, and the detection result shows that that method can work well in different background circumstances with high detection rate. Moreover, a synchronous ship detection experiment was carried out in Qingdao port in October 28, 2005 to verify the new method and one ENVISAT ASAR imagery was acquired to detect ship targets. It can be concluded from the experiment that the new method not only has high detection rate, but also is time-consuming, and is suitable for the operational ship detection system.     

A study of effects of sonar bandwidth for underwater target classification

The problem of classifying underwater targets is addressed in this paper. The proposed classification system consists of several subsystems including preprocessing, subband decomposition using wavelet packets, linear predictive coding, feature selection and neural network classifier. A multi-aspect fusion system is introduced to further improve the classification accuracy. The classification performance of the overall system is demonstrated and benchmarked on two different acoustic backscattered data sets with 40- and 80-kHz bandwidth. A comprehensive study is then carried out to compare the classification performance using these data sets in terms of the receiver operating curves, error locations, and generalization and robustness on a large set of noisy data. Additionally, the importance of different frequency bands for the wideband 80-kHz data is also investigated. For the wideband data, a subband fusion mechanism is introduced which offers very promising results.     

A low level supplementary heating system for free divers

A simple and effective method of heating divers in extreme cold water has been developed. The local heating concept utilizes a uniformly distributed granular mixture of magnesium and iron particles packed in small sachets. Upon activation by sea water, the two metal mixture behaves as a multitude of short-circuited electrolytic cells, producing thermal energy rather than electrical energy. The 45 mm-square sachets may be placed where heating is required on the diver's body, thus giving rise to the term “local heating”, obviously, the heating system requires no pumping device, or distribution network. Heating rate and duration of output of the sachets are controlled by particle size, and mixture ratio of the constituent Mg and Fe particles.This paper described the development, testing and performance of the heating sachets. Results of live tests in different dive situations are also presented and discussed.     

A highly concentrated region of cold hydrocarbon seeps in the southeastern Mediterranean Sea

In July 1999, we conducted a side-scan sonar survey in the southeastern Mediterranean Sea, between 300- and 800-m water depths approximately 30 nautical miles from the Sinai Peninsula and Gaza Strip. Examination of the sonar imagery revealed numerous acoustic targets, each on the order of a few meters and surrounded by small depressions. Subsequent visual inspection of two of these targets by a remotely operated vehicle (ROV) revealed they were cold hydrocarbon seeps through which small bubbles of gas and shimmering fluids were emitted. Surrounding each cold seep were benthic communities of organisms. The ROV was used to gather video and still-camera imagery, map the surrounding microbathymetry, and collect samples of the seep structure and associated organisms. A sub-bottom profiler, which was attached to the ROV, was used to image the submerged structure of the second seep site. Further examination and analysis revealed that the seeps comprise hard deposits of calcium carbonate, and that the organisms are clams and polychaetes which are probably chemosymbiotic. The origin of the seep gas is hypothesized to be the natural decay of organic matter in the sapropel sediment, leading to the production of methane. Circulating fluids, which carry the dissolved gas through preferential pathways along small faults or bedding planes, percolate through the seafloor, precipitate calcium carbonate, release gas, and support the benthic organisms.     

A classification approach of cost effective management measures for the improvement of watershed quality

The purpose of this paper is to provide a classification of the literature concerning the application of the cost-effectiveness analysis (CEA) to evaluate management measures for the improvement of watershed quality. This literature focuses on eutrophication from agricultural runoff and industrial activities. The knowledge of the cost-environmental effectiveness of a management practice/technique or of a market-based instrument (economic instruments, environmental agreements) as well as an understanding of which quantitative and qualitative data are needed for the application of CEA could be used as a tool, in the management processes, for the identification of the appropriate policy measures for each case study-watershed. From this classification effort results that according to the environmental target and the considered assumptions for the leaching of nutrients different management measures and different mix of these measures provide a cost-effective diminution of watershed pollution. The decrease of agricultural run-off water pollution is a priority and organic farming, new tillage practices, and catch crops are recommended. Moreover, wetlands restoration is described as a low-cost option. Tradable permits and environmental agreements under an appropriate management design are proposed for the decrease of pollutants caused by industrial activities. However, the positive interaction of these measures with stakeholders is the decisive factor for their application and effectiveness and also the least costly way.