Distinguishing Mountain Front and Mountain Block Recharge in an Intermontane Basin of the Himalayan Region

Intermontane basin aquifers worldwide, particularly in the Himalayan region, are recharged largely by the adjoining mountains. Recharge in these basins can occur either by water infiltrating from streams near mountain fronts (MFs) as mountain front recharge (MFR) or by sub-surface mountain block infiltration as mountain block recharge (MBR). MFR and MBR recharge are challenging to distinguish and are least quantified, considering the lack of extensive understanding of the hydrological processes in the mountains. This study used oxygen and hydrogen isotopes (δ¹⁸O and δ²H), electrical conductivity (EC) data, hydraulic head, and groundwater level data to differentiate MFR and MBR. Groundwater level data provide information about the groundwater-surface water interactions and groundwater flow directions, whereas isotopes and EC data are used to distinguish and quantify different recharge sources. The present methodology is tested in an intermontane basin of the Himalayan region. The results suggest that karst springs (KS) and deep groundwater (DGW) recharge are dominated by snowmelt (47% ± 10% and 46% ± 9%) as MBR from adjacent mountains, insignificantly affected by evaporation. The hydraulic head data and isotopes indicate Quaternary shallow groundwater (SGW) aquifer system recharge as MFR of local meteoric water with significant evaporation. The results indicate several flow paths in the aquifer system, a local flow for KS, intermediate flow for SGW, and regional flow for DGW. The findings will significantly impact water resource management in the area and provide vital baseline knowledge for sustainable groundwater management in other Himalayan intermontane basins.     

Groundwater contributions of flow and nitrogen in a headwater agricultural watershed

Nonpoint sources of nitrogen (N) and other nutrients are a major source of water pollution within the Chesapeake Bay watershed and other basins around the world. Human activities associated with agricultural practices can account for a large percentage of N loadings delivered to streams and rivers. This work aims to improve understanding of N transport from groundwater to surface waters, quantifying the principal hydrological processes driving water and N fluxes into and out of a headwater agricultural stream reach. The study site is a 175-m stream reach in a heavily cultivated 40-ha watershed in east-central Pennsylvania. This subwatershed is underlain by fractured shale bedrock, and receives most of its baseflow from groundwater, either by diffuse matrix discharge through the streambed or by localized discharge through riparian seeps. Samples of stream, seep, and shallow groundwater were collected approximately monthly under steady hydrologic conditions in 2017. Calculated matrix flow from hydraulic head and conductivity measurements paired with differential stream gauging was used to solve for the riparian seep flux using a mass balance approach. Riparian seep fluxes ranged from 45 to 217 m³/d, transporting 0.6–4.2 kg N d⁻¹ of nitrate-N from the fractured bedrock aquifer to the stream. Hydrochemical data suggest that the stream is mainly disconnected from the underlying aquifer and that seeps supply essentially all water and N to the system. Seeps are likely sourced with N in nearby agricultural fields and accelerated through the system with shorter residence times than shallow groundwater. Water isotope data reinforced this notion. This study underscores the importance of agriculture as a source of N to ground and surface waters. Identifying source areas that are causing groundwater enrichment of N and seep areas where N discharges to streams is beneficial for developing N pollution mitigation strategies and implementing management practices that aim to reduce nutrient loads to the Chesapeake Bay.     

Groundwater discharge mechanism in semi‐arid regions and the role of evapotranspiration

The present study examined groundwater recharge/discharge mechanisms in the regional Central Sudan Rift Basins (CSRB). Aquifers in CSRB constitute poorly sorted silisiclastics of sand, clay and gravels deposited in closed hydrologic systems of the Cretaceous–Pleistocene fluviolacustrine environments. CSRB are bounded to the north by the highlands of the Central African Shear Zone (CAZS) that represents the surface and groundwater divides. Sporadic recharge in the peripheries of the basins along the CASZ occurs subsequent to decadal and centennial storm events. Inflow from the Nile into the aquifers represents an additional source of recharge. Thus, groundwater resources cannot be labelled fossil nor can they be readily recharged. Closed hydrologic troughs located adjacent to the influent Nile system mark areas of main groundwater discharge characterized by lower hydraulic heads. This study has examined mechanisms that derive the discharge of the groundwater in these closed basins and concluded that only evapotranspirative discharge can provide a plausible explanation. Groundwater abstraction is mainly through deep‐rooted trees and effective evaporation. The increase of TDS along the flow indicates local recharge at the peripheries of basins and shows the influence of evaporation and rock/water interaction. The decline in groundwater level along a flow path was calculated using Darcy's law to estimate average recharge and evapotranspirative discharge, which are equal under natural equilibrium and make the only fluxes in CSRB. Steady‐state 2D flow modelling has demonstrated that an average recharge of 4–8 mm yr^?1 and evapotranspirative discharge of 1–22 mm yr^?1 will maintain natural equilibrium in CSRB. Sporadic storms provide recharge in the highlands to preserve the current hydraulic gradient and maintain aquifer dynamics. Simulated recharge from the Nile totals about 17·5 mm yr^?1 and is therefore a significant contributor to the water balance. Copyright © 2007 John Wiley & Sons, Ltd.     

Drainage water temperature as a basis for verifying drainage runoff composition on slopes

Tile drainage water temperatures and discharge rates were measured in five highland watersheds of which most are underlain by acid crystalline rock. One of them, Dehtá?e in the Bohemo‐Moravian highland (Czech Republic), was studied in greater detail. The aim was to evaluate water temperature monitoring as a means of determining the source and pathway of drainage runoff during high‐flow events. Rapid increase in drainage discharge was accompanied by rapid change in water temperature. In winter, the rising limb of the hydrograph was accompanied by a decrease in temperature, and the falling limb was associated with a corresponding temperature increase. In summer, the trends were reversed. These data suggest that the water temperature changes are caused by the fastest component of drainage runoff, water from a precipitation event or snowmelt, which can be separated from the remainder of the hydrograph. Measurements of hydraulic conductivity, soil moisture content, soil temperature, and groundwater table level indicate that the major portion of the event water causing this effect infiltrates in the watershed recharge zone where soils are permeable, enters the weathered bedrock, flows preferentially and rapidly down the slope along disjoint fissures in the bedrock, finally emerging as ascending springs, and is, for the most part, intercepted by the tile drainage systems. Copyright © 2011 John Wiley & Sons, Ltd.     

Tritium in ground water of the georgia piedmont: Implications for recharge and flow paths

Environmental tritium was measured in 33 natural water samples representative of precipitation, stream runoff, and groundwater (derived principally from production wells) within the Georgia Piedmont Province. Major ion analyses were used to assist in the interpretation of the tritium results. Tritium concentrations were significantly greater within shallow groundwater derived from the regolith (28–34 TU) and stream runoff (25–30 TU) than within recent rainfall (4–17 TU). Based upon the decay-corrected tritium input function, this probably indicates that at least some of the shallow water is stored within the regolith for a period of approximately 25 years. A ‘post-bomb’ component of recharge was present in all groundwater derived from production wells in the study area. Groundwater sampled from the bedrock aquifers was commonly less tritiated than either stream runoff or shallow water stored in the regolith. the lower tritium concentrations May, have resulted from the mixing of ‘pre-bomb’ water stored within the fractures or the transitional zone directly above the bedrock and modern water stored in the shallow regolith. the preponderance of modern water provides evidence that groundwater flow paths are areally restricted within this setting, probably confined to local surface water drainage basins. the residence time of groundwater in the Piedmont is limited by the lack of deep, gravity-driven regional flow and the localized vertical flow induced by pumping. the results of this study indicate that relatively small tritium concentration variations (10-20 TU) May, have regional hydrological significance in the southeastern Piedmont Province and similar settings.     

On Methods for In‐Well Nitrate Monitoring Using Optical Sensors

Optical sensors are promising for collecting high resolution in‐well groundwater nitrate monitoring data. Traditional well purging methods are labor intensive, can disturb ambient conditions and yield an unknown blend of groundwater in the samples collected, and obtain samples at a limited temporal resolution (i.e., monthly or seasonally). This study evaluated the Submersible Ultraviolet Nitrate Analyzer (SUNA) for in‐well nitrate monitoring through new applications in shallow overburden and fractured bedrock environments. Results indicated that SUNA nitrate‐N concentration measurements during flow cell testing were strongly correlated (R ² = 0.99) to purged sample concentrations. Vertical profiling of the water column identified distinct zones having different nitrate‐N concentrations in conventional long‐screened overburden wells and open bedrock boreholes. Real‐time remote monitoring revealed dynamic responses in nitrate‐N concentrations following recharge events. The monitoring platform significantly reduced labor requirements for the large amount of data produced. Practitioners should consider using optical sensors for real‐time monitoring if nitrate concentrations are expected to change rapidly, or if a site's physical constraints make traditional sampling programs challenging. This study demonstrates the feasibility of applying the SUNA in shallow overburden and fractured bedrock environments to obtain reliable data, identifies operational challenges encountered, and discusses the range of insights available to groundwater professionals so they will seek to gather high resolution in‐well monitoring data wherever possible.     

Characterization of seasonal local recharge using electrical resistivity tomography and magnetic resonance sounding

A groundwater recharge process of heterogeneous hard rock aquifer in the Moole Hole experimental watershed, south India, is being studied to understand the groundwater flow behaviour. Significant seasonal variations in groundwater level are observed in boreholes located at the outlet area indicating that the recharge process is probably taking place below intermittent streams. In order to localize groundwater recharge zones and to optimize implementation of boreholes, a geophysical survey was carried out during and after the 2004 monsoon across the outlet zone. Magnetic resonance soundings (MRS) have been performed to characterize the aquifer and measure groundwater level depletion. The results of MRS are consistent with the observation in boreholes, but it suffers from degraded lateral resolution. A better resolution of the regolith/bedrock interface is achieved using electrical resistivity tomography (ERT). ERT results are confirmed by resistivity logging in the boreholes. ERT surveys have been carried out twice—before and during the monsoon—across the stream area. The major feature of recharge is revealed below the stream with a decrease by 80% of the calculated resistivity. The time‐lapse ERT also shows unexpected variations at a depth of 20 m below the slopes that could have been interpreted as a consequence of a deep seasonal water flow. However, in this area time‐lapse ERT does not match with borehole data. Numerical modelling shows that in the presence of a shallow water infiltration, an inversion artefact may take place thus limiting the reliability of time‐lapse ERT. A combination of ERT with MRS provides valuable information on structure and aquifer properties respectively, giving a clue for a conceptual model of the recharge process: infiltration takes place in the conductive fractured‐fissured part of the bedrock underlying the stream and clayey material present on both sides slows down its lateral dissipation. Copyright © 2007 John Wiley & Sons, Ltd.     

Natural Buffering of Groundwater Contaminants Related to Development in Fractured Rock

In rural areas of New England groundwater from fractured crystalline and sedimentary bedrock is a critical water resource. Increasingly, studies have shown that development occurring in rural areas is resulting in the impairment of water quality in fractured rock aquifers. The objective of this study was to evaluate the spatial and temporal variations in groundwater quality associated with development and evaluate the extent to which common groundwater contaminants associated with rural development may be naturally buffered. The study entailed a compilation and synthesis of over 2500 reports on domestic water quality that spanned a 30 year period. Focus was placed on the spatial distribution and temporal variations in sodium, chloride, iron, manganese, nitrate, and nitrite. Results indicate that despite significant levels of development, the amount of contamination to the bedrock has been minimal. Of the constituents examined, only the chloride concentration exhibits a systematic increase over time, but the level of chloride remained relatively low. The flux of chloride to the bedrock from deicing appears minimal despite the significant amounts of road salt used in the study area. Sodium concentrations in the bedrock remained relatively constant and appear to be buffered by ion exchange with calcium as suggested by the increase in hardness with time. Iron and manganese were present at relatively low levels but did not show any systematic trends over time. Nitrate and nitrite concentrations were very low and found to be inversely correlated with manganese and iron concentrations. This suggests that the presence of iron and manganese contribute to denitrification. This study indicated that both geochemical and biogeochemical processes are active buffering mechanisms that help shield the bedrock from contaminants associated with development.     

Role of bedrock groundwater in the rainfall–runoff process in a small headwater catchment underlain by volcanic rock

The role of bedrock groundwater in rainfall–runoff processes is poorly understood. Hydrometric, tracer and subsurface water potential observations were conducted to study the role of bedrock groundwater and subsurface flow in the rainfall–runoff process in a small headwater catchment in Shiranui, Kumamoto prefecture, south‐west Japan. The catchment bedrock consists of a strongly weathered, fractured andesite layer and a relatively fresh continuous layer. Major chemical constituents and stable isotopic ratios of δ¹⁸O and δD were analysed for spring water, rainwater, soil water and bedrock groundwater. Temporal and spatial variation in SiO₂ showed that stream flow under the base flow condition was maintained by bedrock groundwater. Time series of three components of the rainstorm hydrograph (rainwater, soil water and bedrock groundwater) separated by end member mixing analysis showed that each component fluctuated during rainstorm, and their patterns and magnitudes differed between events. During a typical mid‐magnitude storm event, a delayed secondary runoff peak with 1·0 l s⁻¹ was caused by increase in the bedrock groundwater component, whereas during a large rainstorm event the bedrock groundwater component increased to ≈ 2·5 l s⁻¹. This research shows that the contribution of bedrock groundwater and soil water depends strongly on the location of the groundwater table, i.e. whether or not it rises above the soil–bedrock interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of bedrock flow on catchment rainfall‐runoff characteristics and the water balance in forested catchments in Tanzawa Mountains,Japan

In this paper, we examined the role of bedrock groundwater discharge and recharge on the water balance and runoff characteristics in forested headwater catchments. Using rigorous observations of catchment precipitation, discharge and streamwater chemistry, we quantified net bedrock flow rates and contributions to streamwater runoff and the water balance in three forested catchments (second‐order to third‐order catchments) underlain by uniform bedrock in Japan. We found that annual rainfall in 2010 was 3130 mm. In the same period, annual discharge in the three catchments varied from 1800 to 3900 mm/year. Annual net bedrock flow rates estimated by the chloride mass balance method at each catchment ranged from ?1600 to 700 mm/year. The net bedrock flow rates were substantially different in the second‐order and third‐order catchments. During baseflow, discharge from the three catchments was significantly different; conversely, peak flows during large storm events and direct runoff ratios were not significantly different. These results suggest that differences in baseflow discharge rates, which are affected by bedrock flow and intercatchment groundwater transfer, result in the differences in water balance among the catchments. This study also suggests that in these second‐order to third‐order catchments, the drainage area during baseflow varies because of differences between the bedrock drainage area and surface drainage area, but that the effective drainage area during storm flow approaches the surface drainage area. Copyright © 2012 John Wiley & Sons, Ltd.     

Isotopic and hydrochemical insights into the groundwater characteristics along an arid to semi-humid climate gradient in China

In arid to semi-arid regions, groundwater is a critical water resource heavily relied upon, with the recharge sources and patterns being predominantly shaped by climate change and regional disparities. To compare the characteristics of groundwater in the endorheic and exorheic river basins with the climate transition zone of Gansu Province, this study uses isotopic hydrochemical analyses. This study summarizes the differences in regional groundwater recharge and evolutionary patterns. The results shows that the distribution patterns of precipitation isotopes in endorheic and exorheic river basins are opposite to those of groundwater isotopes. Specifically, the precipitation in the endorheic areas is more depleted in heavy isotopes, whereas the groundwater is more enriched. Both endorheic areas and exorheic areas exhibit similar characteristics of groundwater hydrochemical evolution, evolving from low-mineralization Mg²⁺ HC ${\mathrm{O}}_3^{-}$ recharge water to Na⁺ Cl⁻ type water with saline characteristics. The former is primarily replenished by surface water, whereas the latter is primarily replenished by precipitation. Variations in recharge patterns along with the differences in climatic conditions lead to distinct groundwater conditions in the two regions.     

Groundwater recharge sources in semiarid irrigated mountain fronts

High-elevation mountains often constitute for basins important groundwater recharge sources through mountain-front recharge processes. These processes include streamflow losses and subsurface inflow from the mountain block. However, another key recharge process is from irrigation practices, where mountain streamflow is distributed across the irrigated piedmont. In this study, coupled groundwater fluctuation measurements and environmental tracers (¹⁸O, ²H, and major ions) were used to identify and compare the natural mountain-front recharge to the anthropogenically induced irrigation recharge. Within the High Atlas mountain front of the Ourika Basin, Central Morocco, the groundwater fluctuation mapping from the dry to wet season showed that recharge beneath the irrigated area was higher than the recharge along the streambed. Irrigation practices in the region divert more than 65% of the stream water, thereby reducing the potential for in-stream groundwater recharge. In addition, the irrigation areas close to the mountain front had greater water table increases (up to 3.5 m) compared with the downstream irrigation areas (<1 m increase). Upstream crops have priority to irrigation with stream water over downstream areas. The latter are only irrigated via stream water during large flood events and are otherwise supplemented by groundwater resources. These changes in water resources used for irrigation practices between upstream and downstream areas are reflected in the spatiotemporal evolution of the stable isotopes of groundwater. In the upstream irrigation area, the groundwater stable isotope values (δ¹⁸O: −8.4‰ to −7.4‰) reflect recharge by the diverted stream water. In the downstream irrigation area, the groundwater isotope values are lower (δ¹⁸O: −8.1‰ to −8.4‰) due to recharge via the flood water. In the nonirrigation area, the groundwater has the highest stable isotope values (δ¹⁸O: −6.8‰ to −4.8‰). This might be due to recharge via subsurface inflow from the mountain block to the mountain front and/or recharge via local low altitude rainfall. These findings highlight that irrigation practices can result in the dominant mountain-front recharge process for groundwater.     

Environmental isotopes and hydrochemical study applied to surface water and groundwater interaction in the Awash River basin

An environmental isotope and hydrochemical study was carried out to conceptualize the surface water and groundwater interaction and to explore the groundwater flow pattern in relation to the geological setting. More emphasis is given to the Afar Depression where groundwater is a vital source of water supply. Conventional field hydrogeological study and river discharge records support the isotope and hydrochemical analysis. The region is tectonically active, comprising rift volcanic terrain bordered by highlands. The result revealed that recent meteoric water is the major source of recharge. Three distinct groundwater zones were identified associated with the highlands, transitional escarpment and the rift. Towards the rift, the ionic concentration and isotopic enrichment (δ²H and δ^18degO) increases following the groundwater flow paths, which is strongly controlled by axial rift faults. The groundwater flow converges to the seismically active volcano–tectonic depressions with internal drainage and to the Awash River. Within the Afar Depression, at least four groundwater regimen are identified: (1) fresh and shallow groundwater associated with alluvial deposits ultimately recharged by isotopically depleted recent highland rainfall and the evaporated Awash River; (2) cold and relatively younger groundwater within localized fractured volcanics showing mixed origin in axial fault zones; (3) old groundwater with very high ionic concentration and low isotopic signature localized in deep volcanic aquifers; and (4) old and hot saline groundwaters connected to geothermal systems. The study demonstrated that dependable groundwater can only be obtained from the first two aquifer types in aerially restricted zones in flat plains following river courses, local wadis and volcano–tectonic depressions. The conventional hydrogeological survey and discharge records indicate substantial channel losses from the Awash River, which becomes a more dominant source of recharge in central and lower Awash valleys. Copyright © 2007 John Wiley & Sons, Ltd.     

Groundwater recharge estimation in arid hardrock‐alluvium aquifers using combined water‐table fluctuation and groundwater balance approaches

This paper proposes an approach to estimate groundwater recharge using an optimization‐based water‐table fluctuation method combined with a groundwater balance model in an arid hardrock‐alluvium region, located at the Oman–United Arab Emirates border. We introduce an “effective hardrock thickness” term to identify the percentage of the considered hardrock thickness in which effective groundwater flow takes place. The proposed method is based upon a Thiessen polygon zoning approach. The method includes subpolygons to represent specific geologic units and to enhance the confidence of the estimated groundwater recharge. Two linear and 1 nonlinear submodels were developed to evaluate the model components for the calibration (October 1996 to September 2008) and validation (October 2008 to September 2013) periods. Long‐term annual groundwater recharge from rainfall and return flow over the model domain are estimated as 24.62 and 5.71 Mm³, respectively, while the effective groundwater flow circulation is found to occur in the upper 7% of the known hardrock thickness (42 m), confirming conclusions of previous field studies. Considering a total difference in groundwater levels between eastern and western points of the study area of the order of 220 m and a 12‐year monthly calibration period, a weighted root mean squared error in predicted groundwater elevation of 2.75 m is considered quite reasonable for the study area characterized by remarkable geological and hydrogeological diversity. The proposed approach provides an efficient and robust method to estimate groundwater recharge in regions with a complex geological setting in which interaction between fractured and porous media cannot be easily assessed.     

Contributing Areas to Domestic Wells in Dipping Sedimentary Rocks under Extreme Recharge Events

We use particle tracking to determine contributing areas (CAs) to wells for transient flow models that simulate cyclic domestic pumping and extreme recharge events in a small synthetic watershed underlain by dipping sedimentary rocks. The CAs consist of strike-oriented bands at locations where the water table intersects high-hydraulic conductivity beds, and from which groundwater flows to the pumping well. Factors that affect the size and location of the CAs include topographic flow directions, rock dip direction, cross-bed fracture density, and position of the well relative to streams. For an effective fracture porosity (n_e) of 10⁻⁴, the fastest advective travel times from CAs to wells are only a few hours. These results indicate that wells in this type of geologic setting can be highly vulnerable to contaminants or pathogens flushed into the subsurface during extreme recharge events. Increasing n_e to 10⁻³ results in modestly smaller CAs and delayed well vulnerability due to slower travel times. CAs determined for steady-state models of the same setting, but with long-term average recharge and pumping rates, are smaller than CAs in the models with extreme recharge. Also, the earliest-arriving particles arrive at the wells later in the steady-state models than in the extreme-recharge models. The results highlight the importance of characterizing geologic structure, simulating plausible effective porosities, and simulating pumping and recharge transience when determining CAs in fractured rock aquifers to assess well vulnerability under extreme precipitation events.     

A groundwater recharge field study: site characterization and initial results

A field study site was installed in east‐central Pennsylvania to examine processes controlling groundwater recharge. It was instrumented to monitor climatic inputs, soil water dynamics and groundwater response. Characterization of the layered fractured bedrock underlying the site by rock coring, seismic surveys and interval packer testing showed consistencies between layer depths, fracture frequencies, seismic velocities and hydraulic conductivities. Monthly summaries of rainfall and percolate over two years showed that percolate rates were generally high and closely related to precipitation during the dormant season. During the growing season, however, the relationship became erratic with large variabilities occurring between individual lysimeter measurements. Eight dormant season rainfall events were examined in detail. Smaller events produced similar responses from 1 m deep percolate lysimeters. Approximately 10–15 mm of rain was required to initiate percolate, with the time delay in response dependent on how long it took this depth to accumulate; 5 to 6 mm of the rain was retained in storage, with the remainder becoming percolate. Larger rains, from 30–110 mm, caused correspondingly larger depths of percolate and larger water table responses, but generally similar patterns of site response. Groundwater at the site was typically about 6 m below the land surface during the dormant season. It responded 1–2 hours after the onset of percolate, and reached its maximum elevation anywhere from 4 to 16 hours after that, even though percolate was still occurring. Based on causative depth of recharge and amount of water level rise in wells, the specific yield of the aquifer was found to be of the order of 0·01. This value is characteristic of fracture geometry rather than matrix properties of the bedrock. Copyright © 1999 John Wiley & Sons, Ltd.     

Groundwater recharge in the Victoria Nile basin of east Africa: support for the soil moisture balance approach using stable isotope tracers and flow modelling

Across equatorial Africa, increasing demand for groundwater has raised concerns about resource sustainability and has highlighted the need for reliable estimates of groundwater recharge. Recharge investigations in this environment are typically inhibited by a shortage of good quality meteorological and hydrogeological records. Moreover, when recharge studies are attempted they tend to rely on a single technique and frequently lack corroborating evidence to substantiate recharge predictions. In recent studies undertaken in the Aroca catchment of the Victoria Nile basin in central Uganda, the timing and magnitude of recharge determined by a soil moisture balance approach are supported by stable isotope data and groundwater flow modelling. The soil moisture balance study reveals that recharge averages in the order of 200 mm year⁻¹ and is more dependent on the number of heavy (more than 10 turn day⁻¹) rainfall events than the total annual volume of rainfall. Stable isotope data suggest independently that recharge occurs during the heaviest rains of the monsoons, and further establish that recharge stems entirely from the direct infiltration of rainfall, an assumption implicit in the soil moisture balance approach. Deforestation over the last 30 years is shown to have more than doubled the recharge estimate. Aquifer flow modelling supports the recharge estimates but demonstrates that the vast majority (over 99%) of recharging waters must be transmitted by the aquifer in the regolith rather the underlying bedrock fractures which have traditionally been developed for rural water supplies.     

Analytical and Numerical Modeling of Solute Intrusion,Recovery, and Rebound in Fractured Bedrock

Contaminated groundwater in fractured bedrock can expose ecosystems to undesired levels of risk for extended periods due to prolonged back-diffusion from rock matrix to permeable fractures. Therefore, it is key to characterize the diffusive mass loading (intrusion) of contaminants into the rock matrix for successful management of contaminated bedrock sites. Even the most detailed site characterization techniques often fail to delineate contamination in rock matrix. This study presents a set of analytical solutions to estimate diffusive mass intrusion into matrix blocks, it is recovered by pumping and concentration rebound when pumping ceases. The analytical models were validated by comparing the results with (1) numerical model results using the same model parameters and (2) observed chloride mass recovery, rebound concentration, and concentration in pumped groundwater at a highly fractured bedrock site in Alberta, Canada. It is also demonstrated that the analytical solutions can be used to estimate the total mass stored in the fractured bedrock prior to any remediation thereby providing insights into site contamination history. The predictive results of the analytical models clearly show that successful remediation by pumping depends largely on diffusive intrusion period. The results of initial mass from the analytical model was used to successfully calibrate a three-dimensional discrete fracture network numerical model further highlighting the utility of the simple analytical solutions in supplementing the more detailed site numerical modeling. Overall, the study shows the utility of simple analytical methods to support long-term management of a contaminated fractured bedrock site including site investigations and complex numerical modeling.     

Aquifer interactions with a polluted mountain river of Nicaragua

The interactions between a stream and nearby shallow aquifers were investigated in a mountain basin being polluted by mercury released during mining in central Nicaragua. Hourly data series of water levels and temperatures were analysed using cross‐correlation. Resistivity imaging was used to map the subsurface and to complement the hydrological data interpretation. The results show the complex hydrogeological conditions that characterize the region, with weathering and fractured rock as main contributors to groundwater transport. The resistivity images suggest the presence of two vertical dykes perpendicular to the stream, and zones rich in clay. The data series indicate a rapid response from the aquifers to recharge events, followed by immediate discharge on a yearly basis. Furthermore, alternating periods of stream infiltration and aquifer discharge were identified. This work demonstrates that surface water pollution is a threat to groundwater quality in the area. Copyright © 2007 John Wiley & Sons, Ltd.