包头市典型工业区表层土壤中重金属污染状况及其潜在生态风险研究

为了解包头市典型工业企业对其所在地土壤中重金属含量的影响及污染现状,利用相关性系数对其表层土壤中7种重金属(Cu、Zn、Pb、Cr、Cd、Mn、Ni)来源进行研究,并采用内梅罗综合污染指数法和潜在生态危害指数对其污染状况进行评价。结果表明,7种重金属含量平均值均高于内蒙古土壤背景值,其中Cd、Mn、Ni超标率已达100%,而Cu、Pb、Zn的超标率分别为97%、93%和93%,只有Cr超标率较低(53%),污染程度依次为CdPbCuNiZnMnCr,其中Pb和Cd为重度污染,Cu、Zn、Ni为中度污染,Cr、Mn为轻度污染;Cu、Zn、Cr、Mn、Ni可能同时来自工业生产和交通运输两个源,而Pb和Cd除上述来源外,燃煤烟气的排放有较大贡献。潜在生态危害依次为CdPbCuNiCrZnMn,其中Cd的潜在生态风险最大,应予以高度重视,其他金属的风险均为轻微。     

固体聚合膜电解浓集法测量天然水中低含量氚的化学淬灭效应研究

固体聚合膜电解浓集法是浓缩氚含量较低(1 Bq/m~3)的天然水样的常用方法,但因水样自身含有杂质离子或电解装置聚合膜带入杂质进入浓集液,使浓集液偏酸性,在测量过程中易产生化学淬灭效应,导致氚的测量值偏低。本文研究了水样自身存在的杂质离子和聚合膜上残留的杂质离子、样品溶液的pH值及其电导率所产生的化学淬灭效应的影响,实验表明,为减少化学淬灭效应,提高测量低含量氚的准确性,需保证水样溶液呈中性,电导率≤1μS/cm,同时避免杂质沉积在聚合膜上。如果水样溶液的pH值偏酸性、电导率大于1μS/cm,可采用酸碱混合型离子交换树脂去除水样中自身的杂质;对于聚合膜引入的杂质,可在电解后的水样中加入微量氨水将其pH值调节至中性。     

Application of multivariate geostatistics in the investigation of heavy metal contamination of roadside dusts from selected highways of the Greater Toronto Area, Canada

A good understanding of roadside soil contamination and the location of pollution sources is important for addressing many environmental problems. The results are reported here of an analysis of the content of metals in roadside dust samples of four major highways in the Greater Toronto area (GTA) in Ontario, Canada. The metals analyzed are Pb, Zn, Cd, Ni, Cr, Cu, Mn, and Fe. Multivariate geostatistical analysis [correlation analysis (CA), principal component analysis (PCA), and hierarchical cluster analysis (HCA)] were used to estimate soil chemical content variability. The correlation coefficient shows a positive correlation between Cr–Cd, Mn–Fe, and Fe–Cu, while negatively between Zn–Cd, Mn–Cd, Zn-Cr, Pb–Zn, and Ni–Zn. PCA shows that the three eigenvalues are less than one, and suggests that the contamination sources are processing industries and traffic. HCA classifies heavy metals in two major groups. The cluster has two larger subgroups: the first contains only the variables Fe, Mn, Cu, Cr, Ni, and Pb, and the second includes Cd and Zn. The geostatistical analysis allows geological and anthropogenic causes of variations in the contents of roadside dust heavy metals to be separated and common pollution sources to be identified. The study shows that the high concentration of traffic flows, the parent material mineralogical and chemical composition, and land use are the main sources for the heavy metal concentration in the analyzed samples.     

Geochemical variations of major and trace elements in recent sediments,off the Gulf of Mannar,the southeast coast of India

The Gulf of Mannar along the Tuticorin coast is a coral base of the southeast coast of India. To obtain a preliminary view of its environmental conditions, geochemical distribution of major elements (Si, Al, Fe, Ca, Mg, Na, K, P), trace elements (Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) and acid leachable elements (Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd) were analyzed in surface sediment samples from two seasons. Geochemical fractionation confirmed the lithogenic origin of metals, which were mainly associated with the detrital phase. The sediments in the gulf are sandy with abundant calcareous debris, which controls the distribution of total and acid leachable elements. Enrichment factors relative to crust vary by a magnitude of two to three and the presence of trace metals indicates the input of Cr, Pb, Cd, Cu and Zn in both forms through industrial activities. Factor analysis supports the above observation with higher loadings on acid leachable elements and its association with CaCO₃. The increase in concentration of trace metals (Cr, Pb, Cd, Cu, Co, Ni, Zn) along the Gulf of Mannar indicates that the area has been contaminated by the input from riverine sources and the industries nearby. The present study indicates that other sources should be evaluated in the long-term monitoring program.     

Multivariate analysis of heavy metals in surface sediments from lower reaches of the Xiangjiang River, southern China

The concentrations of heavy metals (Cr, Mn, Co, Ni, Cu, Zn, Cd, and Pb) in 16 samples collected from the lower reach (Changsha–Xiangtan–Zhuzhou section) of the Xiangjiang River in southern China were determined by high-resolution inductively coupled plasma mass spectroscopy (HR-ICPMS). Multivariate analysis, such as principal component analysis and cluster analysis, coupled with correlation coefficient analysis, was used to analyze the analytical data and to identify possible pollution sources of heavy metals. The results showed that the eight studied heavy metals accumulated in the sediments from the lower Xiangjiang River, especially Mn, Cu, Zn, Pb and Cd, which were 2.0–2.6, 1.7–2.6, 3.5–3.8, 3.2–3.6 and 189.5–152.8 times the soil trace element background for Hunan Province and UCC background values, respectively. Principal component analysis and cluster analysis, coupled with correlation coefficient analysis, revealed that the sediments from lower Xiangjiang River were mainly influenced by two sources: Cr, Co, Ni, Cu, Zn, Cd and Pb mainly originated from industrial sources, whereas Mn was derived from both industrial and natural sources, but mainly from natural sources due to weathering and erosion.     

Geochemical and statistical analysis of trace metals in atmospheric particulates in Wuhan, central China

The geochemical characteristics of trace metals (As, Cr, Co, Cd, Cu, Mn, Ni, Pb, V and Zn) in PM10 in Wuhan, the biggest metropolitan in central China, as well as their sources and contributions were analyzed. As PM10 has been the principal contaminant of air in Wuhan for years, concentrations of trace metals were measured in PM10 using high-volume samplers at one urban (Hankou) and one industrial (Changqian) site in Wuhan between September 2003 and September 2004. Based on the results, PM10 in Wuhan is characterized by relatively high levels of As, Cd, Mn, Pb and Zn compared with other Asian cities. The time-series of these elements indicated that As, Cu and Zn at both sites have similar trends, whereas Pb levels showed different patterns due to different emission sources. Factor analysis was applied to the datasets focusing on the apportionment of the mass of selected trace metals. Results indicate that Pb, Cd and As have a common source (smelting) at both sites, whereas the sources of Ni vary from coal combustion and steel in Changqian to mineral and traffic in Hankou.     

Spatial distribution, source identification and affecting factors of heavy metals contamination in urban–suburban soils of Lishui city, China

An investigation on spatial distribution, possible pollution sources, and affecting factors of heavy metals in the urban–suburban soils of Lishui city (China) was conducted using geographic information system (GIS) technique and multivariate statistics. The results indicated that the topsoils in urban and suburban areas were enriched with metals, such as Cd, Cu, Pb, and Zn. Spatial distribution maps of heavy metal contents, based on geostatistical analysis and GIS mapping, indicated that Cd, Cr, Cu, Mn, Ni, Pb, and Zn had similar patterns of spatial distribution. Their hot-spot areas were mainly concentrated in the densely populated old urban area of the city. Multivariate statistical analysis (correlation analysis, principal component analysis, and clustering analysis) showed distinctly different associations among the studied metals, suggesting that Cr, Cu, Ni, Pb, Cd, and Zn had anthropogenic sources, whereas Co and V were associated with parent materials and therefore had natural sources. The Cd, Cr, Ni, Pb, and Zn contents were positively correlated with soil organic matter, pH, and sand content (p < 0.01). It is concluded that GIS and multivariate statistical methods can be used to identify hot-spot areas and potential sources of heavy metals, and assess soil environment quality in urban–suburban areas.     

Contamination levels assessment of potential toxic metals in road dust deposited in different types of urban environment

A total of 42 samples of road dust were collected along ring road, city centre, city side, and freeway in Urumqi, China. Total concentrations of Cd, Cr, Cu, Ni, Pb, Mn, Be, Co, Zn, and U were determined by using the inductively coupled plasma-mass spectrometry in order to assess and to compare road dust contamination levels of metals among the four roads. The results show that, among the four categories of roads, mean concentrations of Co and U vary little. City centre locations show strong enrichments of Cd, Cu, Pb, and Be. Along the ring road, the highest mean concentrations were found for Cr, Ni, Mn, and Co. However, the highest concentrations of Zn and U were found along the freeway. The cluster analysis shows that three main groups can be distinguished. Every group may be associated with different main sources and concentrations of the metals. The results of contamination assessment reveal that, among all of the potential toxic metals, Cd, Cu, and Zn pollution were obviously heavier with moderate or high contamination indices for most road dust samples, while Cr, Ni, and Pb contamination were lower along the four categories of roads. Compared with the city side, Cd, Cu, Pb, Ni, and Zn contamination were heavier along the ring road, the city centre, and the freeway with high traffic density. Low Pb contamination or no contamination in all the road dust samples may be related to the increasing usage of lead-free petrol.     

Temporal variations of heavy metals in coral Porites lutea from Guangdong Province, China： Influences from industrial pollution, climate and economic factors

1 IntroductionCorals are an important proxy for reconstructingpaleo-environment and revealing global changes in thepast. Variations of heavy metals in the growth bands ofcorals can provide important information about the oce-anic environment.Bastidas and …     

Impact of land use types on the concentrations of metals in soils of urban environment in Nigeria

The concentrations of metals (Cd, Pb, Ni, Cr, Cu, Fe, Mn and Zn) were determined in soils under different land use types in an urban environment in order to study the impact of land uses on the concentrations of metals in the soils. The mean concentration range of metals for all land use types were 42.1 to 410, 11.2 to 118.2, 4388.2 to 31891.1, 9.7 to 65.4, 0.1 to 1.8, 4.7 to 35.2, 2.0 to 16.8 and 77.9 to 881.7 mg/kg, for Mn, Pb, Fe, Cu, Cd, Cr, Ni and Zn, respectively. The computed multiple pollution index (MPI) indicated that 67 % of the examined sites had MPI values between 1 and 20 i.e. at the pollution range, while 33 % of sites had MPI values of zero which indicated that these sites were not polluted with the studied metals. Zinc had the highest impact on the multiple pollution index values. Three main principal components were identified from the principal component analysis which include (i) Cu, Zn, Pb, Cr and Ni originating from both industrial and agricultural sources, and as well as automobile exhausts; (ii) Fe and Mn which originated from both natural and anthropogenic sources; (iii) Cd which its anthropogenic origin is different from components I and II. This study provided information on the sources of metals in the urban environment and extent of contamination associated with each land use, which are useful in the ranking of contaminated sites, environmental quality management, environmental forensic studies and guidance for remediation/redevelopment of contaminated land.     

Spatial variation and risk assessment of heavy metals in paddy rice from Hunan Province,Southern China

Heavy metal contamination in polished rice grains collected from Hunan Province, Southern China, has been investigated in this study. The concentrations of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn in rice were determined by microwave-assisted digestion and inductively coupled plasma-mass spectrometry method. In order to evaluate the correlations among heavy metals, statistical analyses including Pearson’s correlation analysis, principal component analysis and hierarchical cluster analysis were performed. Three distinct clusters were classified by the hierarchical cluster analysis approach. In the principal component analysis, three principle components were extracted with the eigenvalue >1.0. The spatial distribution of heavy metals was predicted by the ordinary kriging interpolation. Cu and Ni with similar distribution patterns could be primarily originated from geogenic source. The hot-spot areas in the distribution patterns of Mn, Pb and Zn could be mainly related to mining and smelting activities. Cd and Co might be derived from the combination of natural existence and anthropogenic sources. The chronic non-carcinogenic effect on local rice consumers from exposure to heavy metals was estimated by the target hazard quotient. The average target hazard quotient values of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn were 1.754, 0.367, 0.003, 0.544, 0.165, 0.775, 0.228, 0.049 and 0.481, respectively. The target hazard quotient value of Cd exceeded the threshold value suggesting high potential health risk to residents in Hunan Province through rice consumption.     

A statistical approach for determining the environment impact of surface sediments from the Dongting Lake area,central China

The Dongting Lake, the second biggest freshwater lake in China, consists of three wetlands of national importance, namely the East Dongting Lake, the South Dongting Lake, and the West Dongting Lake. Surface sedi-ments were sampled from 57 locations across the lake. Nutrient concentrations [total organic carbon (TOC), total N (TN) and total P (TP)] and 16 element concentrations (Al, As, B, Ca, Cd, Cr, Cu, K, Fe, Hg, Mn, Ni, Pb, Si, Ti and Zn) in the sediments were measured to investigate the impact of industrialization along the lake's coastline and sev-eral tributaries on the profiles of nutrients and heavy metals in the lake's surface sediments. R-mode cluster analysis (CA) was used to integrate geochemical data. The result showed that euthophication of the Dongting Lake resulted mainly from TN and TOC. The main polluting trace metals are Hg, As, Cd, Zn, Pb and Mn, which are largely ad-sorbed on clay minerals or Fe/Mn oxides, or deposited as carbonates. Principal component analysis (PCA) revealed the source of micropollutants. The worst affected district by heavy metals is the East Dongting Lake, the pollution sources may originate mainly from the Xiangjiang drainage area. The results demonstrated that multivariate methods are the potentially great tools for the interpretation of the environmental data on lake sediments.     

Geochemistry of trace metals and Pb isotopes of sediments from the lowermost Xiangjiang River, Hunan Province (P. R. China): implications on sources of trace metals

This paper reports a geochemical study of trace metals and Pb isotopes of sediments from the lowermost Xiangjiang River, Hunan province (P. R. China). Trace metals Ba, Bi, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, Mo, Cd, Sn, Sb, Pb, Tl, Th, U, Zr, Hf, Nb and Ta were analyzed using ICP-MS, and Pb isotopes of the bulk sediments were measured by MC-ICP-MS. The results show that trace metals Cd, Bi, Sn, Sc, Cr, Mn, Co, Ni, Cu, Zn, Sb, Pb and Tl are enriched in the sediments. Among these metals, Cd, Bi and Sn are extremely highly enriched (EF values >40), metals Zn, Sn, Sb and Pb significantly highly (5 < EF < 20), and metals Sc, Cr, Mn, Co, Ni, Cu and Tl moderately highly (2 < EF < 5) enriched in the river sediments. All these metals, however, are moderately enriched in the lake sediments. Geochemical results of trace metals Th, Sc, Co, Cr, Zr, Hf and La, and Pb isotopes suggest that metals in the river sediments are of multi-sources, including both natural and anthropogenic sources. Metals of the natural sources might be contributed mostly from weathering of the Indosinian granites (GR) and Palaeozoic sandstones (PL), and metals of anthropogenic sources were contributed from Pb–Zn ore deposits distributed in upper river areas. Metals in the lake sediments consist of the anthropogenic proportions, which were contributed from automobile exhausts and coal dusts. Thus, heavy-metal contamination for the river sediments is attributed to the exploitation and utilization (e.g., mining, smelting, and refining) of Pb–Zn ore mineral resources in the upper river areas, and this for the lake sediments was caused by automobile exhausts and coal combustion. Metals Bi, Cd, Pb, Sn and Sb have anthropogenic proportion of higher than 90%, with natural contribution less than 10%. Metals Mn and Zn consist of anthropogenic proportion of 60–85%, with natural proportion higher than 15%. Metals Sc, Cr, Co, Cu, Tl, Th, U and Ta have anthropogenic proportion of 30–70%, with natural contribution higher than 30%. Metals Ba, V and Mo might be contributed mostly from natural process.     

Fractionation and risk assessment of heavy metals in soil samples collected along Zerqa River,Jordan

The objectives of the current study were to determine the chemical partitioning of Pb, Ni, Zn, Co, Cr, Mn, Fe and Cd using sequential extraction procedure and to assess the environmental risk associated with these metals in the farming soils along Zerqa River. Metal concentrations were measured by atomic absorption spectrophotometer. The study area demonstrated a wide range for pH, organic matter, carbonate contents, and cation exchange capacity, and is polluted with Pb, Cd, Mn, and Cu. The extensive use of fertilizers and pesticides in the agricultural activities, and discharge of treated and untreated wastewater are the major sources of pollution in the study area. Principal component analysis coupled with Pearson’s correlation analysis between the heavy metals revealed strong and positive correlation between these metals in the study area. According to the Risk Assessment Code (RAC), major portions of Cd and Mn are contained in exchangeable and carbonates fractions and therefore can easily enter the food chain. These metals pose a high to very high risk to the environment. Cu, Ni, Pb, and Zn pose medium risk, while Cr poses a low environment risk.     

Multivariate analysis of heavy metal pollution in street dusts of Xianyang city, NW China

Urban street dust is one of important indicators of the status of urban environmental pollution. There are many studies in capital cities, but little attention has been paid to this kind of study in medium cities, especially in China. The dust samples were collected in the district of traffic crossroads in Xianyang city, Shaanxi Province. Pb, Cd, Cu, Ni, Zn, Cr and Mn concentrations were determined by using atomic absorption spectrometry. The results indicate that street dusts in Xianyang city have elevated metal concentrations as a whole in comparison with Shaanxi Province soil, except for Mn. The content of heavy metals was comparable to those in capital cities. Correlation coefficient analysis, principal component analysis and cluster analysis were used and three main sources were identified; Mn comes mainly from soil sources; Cu, Zn and Ni are mainly derived from industrial sources combined with traffic sources; Pb, Cr and Cd have traffic sources. Heavy metal enrichment factors were calculated, which can reflect human influence degree of street dusts.     

Metal contamination of soils at Scott Base,Antarctica

Soil samples taken from excavated pits on traverses across New Zealand’s Scott Base, Antarctica, were leached with water and 0.01 M HNO₃ and the leachates analysed for Ag, Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The soils had high conductivity and pH values generally increasing with depth and in the range 8.3–10.1. The water leachate generally contained most of the extractable metals except Mn and Cd, and As. Linear relationships were observed between some metals leached into alkaline solution and the Fe in those solutions. The ratios to Fe were comparable to those of the host basanite, and this observation is interpreted as showing that these metals are incorporated in fine mineral particulates derived directly from the rock mass. Outliers in leachable metal concentrations in the soils indicated appreciable contamination of the soil from anthropogenic sources with Ag, Cd, Cu, Pb and Zn as well as As. In some locations high concentrations of Ag and Cd correspond to specific sources and drainage channels. High concentrations of Pb were widely spread and in the top soil layers whereas the elevated concentrations of Zn were distributed throughout the soil profiles indicating atmospheric sources and different mobilities within the soils. Transport within the soils is evident for some metals, as is lateral movement over and through the soils.     

Soil contamination by metals with high ecological risk in urban and rural areas

Industrial development, intensive agriculture and fast urbanization have caused the metal contents of soils to increase to many times the allowable limits. To assess this impact on urban and rural soils, we quantified the Cd, Cr, Cu, Pb, Ni and Zn contents of 258 soil samples from the Recife metropolitan region (RMR). The objectives of the study were to estimate the probability of ecological risk, to determine the spatial pattern of the metals’ accumulation in the soil and to identify potential sources for the metals using a multivariate geostatistical approach. Mean concentrations of Zn, Cr, Pb, Cu, Ni and Cd in soils were 65.2, 17.9, 16.5, 12.8, 6.3 and 1.5 mg kg^?1, respectively. The results demonstrated that the Cd was anthropogenic in origin, the Cr and Ni were lithogenic (natural) in origin and the Cu, Pb and Zn were mixed in origin. Cd contaminated 91% of the samples; the median content of Cd (1.4 mg kg^?1) was three times the quality reference value for soil. The Cd contents of sugarcane fields exceeded the allowable limit (3.0 mg kg^?1) for agricultural areas. The spatial variability of the metals in the RMR showed that metallurgy, cement production, vehicle exhaust and vehicular traffic were the main sources of metals in urban areas, while phosphate-based fertilizers were the main sources in rural areas. More than 80% of the metropolitan region surveyed in the study was at moderate to high ecological risk.     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

The environmental impact of Aguilar mine on the heavy metal concentrations of the Yacoraite River,Jujuy Province,NW Argentina

The Yacoraite River and its tributaries run down the eastern slope of the Aguilar Range. It is one of the tributaries of the Rio Grande, located in Quebrada de Humahuaca, a UNESCO World Heritage site. The Aguilar underground mine (Pb–Ag–Zn) is located in the upper reaches of the Yacoraite River drainage basin. The aim of this work is to characterize the presence of heavy metals in water and sediments of the Yacoraite River and to identify their sources. The analysis shows the seasonal variation of heavy metals concentration in water and their relation with the World Health Organization (WHO) limits established for human consumption. The Yacoraite basin is naturally anomalous in some metals and some elements, such as As which is controlled by the chemical composition of regional lithology. During the wet season, Al, Co, Mo and Pb concentrations in water samples are higher than during the dry season; in addition, these metals are also higher than WHO limit values. High enrichment factors for Ba, Mo, Pb, Zn and Cd were found in Casa Grande stream, indicating the direct influence of the mining activities. Cd, Pb and Zn are present in the Aguilar ore minerals, such as sphalerite and galena. Sediments collected during the dry season show a drastic increase in the concentration of As, Pb, Ba, Zn, Cd and Mn. The Müller geo-accumulation index in Casa Grande indicates that it is a highly polluted stream. The concentrations of As, Pb, Ba, Zn, Cd are also high in Yacoraite River: Security Quality Guidelines indicates toxicity. A decrease in enrichment factors and geo-accumulation indices observed in sediments indicates the occurrence of precipitation/adsorption processes in the river to restore the equilibrium composition. Strict environmental controls in Aguilar Mine are necessary to avoid the uncontrolled input of toxic metals in Casa Grande stream and Yacoraite River.     

Release of heavy metals during weathering of the Lower Cambrian Black Shales in western Hunan,China

Weathering of heavy metal enriched black shales may be one of the most important sources of environmental contamination in areas where black shales are distributed. Heavy metal release during weathering of the Lower Cambrian Black Shales (LCBS) in western Hunan, China, was investigated using traditional geochemical methods and the ICP-MS analytical technique. Concentrations of 16 heavy metals, 8 trace elements and P were measured for samples from selected weathering profiles at the Taiping vanadium ore mine (TP), the Matian phosphorous ore mine (MT), and Taojiang stone-coal mine (TJ). The results show that the bedrock at these three profiles is enriched with Sc, V, Cr, Co, Ni, Cu, Zn, Pb, Th, U, Mo, Cd, Sb, Tl, and P. Based on mass-balance calculation, the percentages of heavy metals released (in % loss) relative to immobile element Nb were estimated. The results show significant rates of release during weathering of: V, Cr, Co, Ni, Cu, Zn, U, Mo, Cd, Sn, Sb, and Tl for the TP profile; Sc, Cr, Mn, Co, Ni, Cu, Zn, Pb, Th, Cd, and Sn for the MT profile; and Sc, Mn, Co, Ni, Zn, Th, Cd, Sn, and Tl for the TJ profile. Among these heavy metals, Co, Ni, Zn, Cd, and Sn show very similar features of release from each of the three weathering profiles. The heavy metals released during weathering may affect the environment (especially topsoil and surface waters) and are possibly related to an observed high incidence of endemic diseases in the area.