Conical folds and apparent rotations in paleomagnetism (a case study in the Southern Pyrenees)

The so-called apparent rotation was defined as the angular deviation between a local paleomagnetic direction (after the standard bedding correction) and their corresponding paleomagnetic reference [J. Geophys. Res. 85 (1980) 3659]. In this paper, we make a theoretical exploration on this concept and we conclude that (depending on the number, sequence, orientation and magnitude of the deformation axes that have affected to the rock volume) the apparent rotation may be the addition of a vertical-axis rotation plus a spurious rotation. The later is an error whose origin is the inappropriate application of the bedding correction during the restoration (which does not fit the reverse sequence of deformations). Then, Apparent rot. (s.l.) (δ)=Spurious rot. (θ)+Vertical-axis rot. (β).Conical folds are complex geometries that cannot be restored by using the bedding correction. However, appearance of apparent and spurious rotations has not been studied even though the presence of this kind of folds is very common in fold and thrust belts. In this paper, we show a way to restore these structures and its associated paleomagnetic data by means of forward modelling on a stereographic projection. The modelling has to be based on a good characterization of the geometry (fold axis orientation) and understanding of the kinematics of the fold. General modelling has also allowed us to predict the apparent rotation in conical synclines. Its magnitude depends on the semiapical angle and on the degree of development of the fold; the sense of the rotation (clockwise or counter-clockwise) will depend on the sense of rotation the fold axis.The western External Sierras provide an excellent case study of apparent rotations due to the presence of a conical fold in the footwall (Ebro foreland basin) of the South Pyrenean sole thrust. In addition, a vertical-axis clockwise rotation up to 47° (32° in average) has been detected in the hagingwall. An apparent rotation up to 28° (20° in average) is observed in the footwall of the structure when a simple bedding correction is used. This deviation does not fit with the expected Ebro basin direction (reference) and is caused by the effect of the Riglos conical syncline, developed by the flexure of the foot wall ramp of the South Pyrenean sole thrust. The forward modelling carried out considering the geometry and kinematics (non significant rotations in the autochthonous foot wall) of this structure predicts very well the paleomagnetic observations in the field (geographic coordinates) with angular departures of only 5° (in average). The only application of the bedding correction would introduce errors (spurious rotations up to 21°, 12 in average) related to the conical geometry that would not allow the differentiation of these distinct structural units.     

Structures in the banded iron-formation of the southeastern Bababudan Hills, Karnataka, India

The banded iron-formation in the southeastern Bababudan Hills display a macroscopic synformal bend gently plunging towards WNW. The bedding planes in smaller individual sectors show a cylindrical or conical pattern of folding. The dominant set of minor folds has WNW-ESE trending axial planes and the axes plunge towards WNW at gentle to moderate angles, though there is considerable variation in orientation of both axes and axial planes. A later set of sporadically observed folds has N-S trending axial planes. The macroscopic synformal bend within the study area forms the southeastern corner of a horseshoe shaped regional synformal fold closure which encompasses the entire Bababudan range. The minor folds are buckle folds modified to a varying extent by flattening. In some examples the quartzose layers appear to be more competent than the ferruginous layers; in others the reverse is true. The folds are frequently noncylindrical and the axes show curvature with branching and en echelon patterns. Such patterns are interpreted to be the result of complex linking of progressively growing folds whose initiation is controlled by the presence of original perturbations in the layers. Domes and basins have at places developed as a result of shortening along two perpendicular directions in a constrictional type of strain. Development of folds at different stages of progressive deformation has given rise to nonparallelism of fold axes and axial planes. The axes and axial planes of smaller folds developed on the limbs of a larger fold are often oriented oblique to those of the latter. Progressive deformation has caused rotation and bending of axial planes of earlier formed folds by those developed at later stages of the same deformational episode. Coaxial recumbent to nearly reclined fold locally encountered on the N-S limb of the macroscopic fold may belong to an earlier episode of deformation or to the early stage of the main deformation episode. The E-W to ESE-WNW strike of axial plane of the regional fold system in the Bababudan belt contrasts with the N-S to NNW-SSE strike of axial planes of the main fold system in the Chitradurga and other schist belts of Karnataka.     

Thrust-breakthrough of asymmetric anticlines: Observational constraints from surveys in the Brooks Range,Alaska

To gain insights into the processes governing the thrust-truncation of anticlines, we conducted a field study of the thrust-truncated folds in the remote Brooks Range of northern Alaska, where there is a transition in fold style from symmetric detachment folds to thrust-truncated asymmetric folds. In order to document the detailed geometry of the km-scale folds exposed in cliff-forming, largely inaccessible outcrops, a new surveying technique was developed that combines data from a theodolite and laser range finder. The field observations, survey profiles, and cross section reconstructions, indicate that late-stage thrust breakthrough of the anticlines within the mechanically competent Lisburne Group carbonates accommodated continued shortening when other mechanisms became unfeasible, including fold tightening, forelimb rotation, and parasitic folding in the anticline forelimbs. These results provide constraints on the processes that govern the transition from buckle folding to thrust truncation in fold-and-thrust belts worldwide.     

Centrifuge modelling of deformation of a multi-layered sequence over a ductile substrate: 1. Style and 4D geometry of active cover folds during layer-parallel shortening

Centrifuge analogue modelling illustrates the progressive development of active folds in multilayers upon a ductile substrate during layer-parallel shortening. Models simulate folding of a mechanically stratified sedimentary sequence upon migmatitic gneisses in a large hot orogen, or upon a thick basal evaporite ± shale sequence in deeper levels of fold belts. The absence of a weak low-viscosity and low-density layer at the interface promotes infolding of the cover sequence and ductile substrate, whereas a planar upper surface to the basal ductile substrate is preserved when it is present. Whilst fold style, wavelength, and deformation of the interface with the ductile substrate differ depending on whether a low-viscosity and low-density layer is present at the base of the cover sequence, there is no marked systematic curvature of fold axes as seen in previous sandbox models for fault-bend or fault propagation folding during bulk shortening. Bulk shortening of a layered sequence with relatively thick individual layers above a ductile substrate promotes a regular and upright train of buckle folds, whereas thinner layers promote a more irregular distribution of buckle folds with variable vergence, style, and amplitude. Buckle folds above a ductile substrate progressively develop during bulk shortening from open and upright, to angular and tight, and may further develop into cuspate structures above relatively weak horizons. Relatively thick weak horizons within the layered sequence during bulk shortening interrupt regular fold patterns up structural section and allow out-of-phase folds to develop above and below the weak horizon.     

低级变质沉积岩区压溶作用在褶皱变形中的意义

拉卡兰褶皱带中,发育于Ballarat-Bandigo冲断带中的低级变质砂、泥岩的宏观构造以间离劈理和人字形褶皱为特征,而且劈理在褶皱中呈扇形发育。劈理和褶皱的几何关系分析显示:劈理和褶皱的形成为压溶作用、压扁作用、弯曲作用和被动旋转共同作用的结果,而褶皱砂、泥岩中变形构造则以与压溶作用和再沉淀过程有关的显微构造为其典型特征。Fry法进行的全岩应变测量显示,褶皱砂岩的内部应变相当低(X/Z=1.40—1.83),褶皱应变格局给出变形机制的信息包括:缩短过程中的压扁作用和压溶作用、褶皱过程中由弯滑导致的层平行剪应变、以及褶皱后期发育阶段内弧区强烈的压溶作用。宏观构造、显散构造以及应变特征多方面信息证明:低级变质的沉积岩在褶皱变形过程中,压溶作用为一重要的变形机制。应变分解显示在30％—50％的总地壳水平缩短量下,弯曲导致的缩短最为14％—36％,压扁导致的缩短量为3％—14％,压溶导致的缩短量为8％—26％,而且压溶作用主要发生在褶皱内弧区。     

The change of palaeomagnetic vector orientations induced by Eulerian rotations: applications for the relative rotations of Spain and Europe

Eulerian rotations of continents induce changes of palaeomagnetic vector orientation that cannot easily be deduced from the parameters of the rotation. An algorithm for the calculation of the new palaeomagnetic declination is proposed and simple rules describing the phenomena are drawn. Applications of this algorithm to the relative rotations of Spain and Europe during the Mesozoic allow a comparison of the geological models with the available palaeomagnetic data, indicating: (1) Spain and Europe did not move with respect to one another between Lower Permian and Upper Triassic times; (2) the palaeomagnetic declination difference observed between these two blocks in the Triassic could be due to a multiphase history, the opening of the Bay of Biscay having occurred during the latest phase in Upper Cretaceous.     

Kinematics of fault-related folding in a duplex,lost river range,Idaho, U.S.A.

The Doublespring duplex, located in the Lost River Range of Idaho, is a Sevier age fault-related fold complex in massive limestones of the Upper Mississippian Scott Peak Formation. Folds within the duplex closely resemble fault-bend fold geometrics, with open interlimb angles and low-angle bed cut-offs. Narrow, widely spaced, bedding-parallel shear zones with well-developed pressure solution cleavage alternate with massive, relatively undeformed layers on fold limbs. Shear zones are developed only on the limbs of anticlines, and have similar but unique morphologies in each of three different folds. Incremental strain histories reconstructed from antitaxial fibrous overgrowths and veins within the shear zones constrain the kinematics of folding. Shear zones experienced distributed bedding-parallel simple shear (flexural flow) towards pins near axial surfaces, while adjacent massive layers experienced rotation through an externally fixed extension direction. The absence of footwall synclines and morphological differences in shear zones from adjacent folds suggest that faulting preceded folding. Kinematic histories of folds that have experienced different translational histories are identical, and are not compatible with strain histories predicted from previous kinematic models of fault-bend folding. Shear zone development and fiber growth is instead interpreted to have occurred during low amplitude fixed-hinge buckling in response to initial resistance to translation of the thrust sheet. Fault-bend folding with mobile axial surfaces occurred with translation of the thrust sheets once the initial resistance to translation was overcome and resulted in no penetrative strain.     

Strain,displacement and rotation associated with the formation of curvature in fold belts; the example of the Jura arc

A new simplified genetic classification scheme for arcuate fold–thrust belts is proposed. Based on total strain patterns and displacement vector fields, we distinguish three extreme end-member models: (1) `Oroclines', pure bending of an initially straight belt, (2) `Piedmont glacier' with divergent transport directions and (3) `Primary arcs'. A simple geometric model set-up for the simulation of strain patterns in primary arcs with uniform transport direction demonstrates that divergent strain trajectories and rotations of passive marker lines do not require any divergence in displacement directions. These often quoted arguments are insufficient for the identification of `Oroclinal bending' or `Piedmont glacier' type of arc formation. Only three-dimensional restorations of an arc provide the critical information about displacement directions. In their absence, arc parallel stretches and rotations in comparison with total strains provide the most useful criteria for the distinction of arc formation modes. As an example, the Jura fold–thrust belt of the external Alps is discussed. A large set of strain data includes total shortening estimates based on balanced cross-sections, local strain axes orientations from the inversion of fault populations [Homberg, C., 1996. Unpublished PhD thesis, Université de Paris VI (France)], tectonic stylolites and micro-strains from twinning in sparry calcite. Strain trajectories (maximum shortening direction) computed from these data define a strongly divergent fan with a 90° opening. A complete displacement vector field for the entire Jura has been determined from balanced cross-sections augmented with three-dimensional `block mosaic' restorations [Philippe, Y., 1995. Unpublished PhD thesis, Université de Chambéry (France)]. Displacement vectors diverge by about 40°, markedly less than strain trajectories. The non-parallelism between strain trajectories and transport directions indicates that considerable wrenching deformation did occur in both limbs of the Jura arc. Paleomagnetically determined clockwise rotations of 0–13° from ten sites (Kempf, O., et al., Terra Nova 10, 6–10) behind the right-hand half of the Jura arc and two sites with a combined 23° anticlockwise rotation behind the left-hand half of the arc are and additional argument in favor of such a wrenching deformation. We conclude that the Jura arc formed as a `Primary arc' with a minor component of `Piedmont glacier' type divergence in transport directions.     

Progressive deformation and the rotation of contemporary fold axes in the Ballybofey Nappe,north-west Ireland

Internal regions of orogenic belts may be characterized by an alignment of fold axes with mineral elongation lineations. This relationship is commonly interpreted as representing progressive tightening and rotation towards the shear direction of early buckle folds, the hinges of which were initiated orthogonal to this direction. Detailed structural analysis of lower amphibolite facies Dalradian metasediments of the Ballybofey (fold) Nappe, north-west Ireland, shows that an intense S₃ schistosity is developed axial planar to mesoscopic and minor F₃ folds. In areas of low D₃ strain, F₃ fold axes plunge gently towards the north-east, whereas in regions of greater strain plunges are towards the south-east subparallel to the constant mineral lineation. Minor folds which initiated at angles of 70–80° from the mineral lineation subsequently rotated towards the shear direction in a consistent clockwise sense. Progressive and variable non-coaxial deformation oblique to the original mean F₃ orientation has resulted in a unimodal distribution pattern of fold axes. Analysis of the angular rotation of fold axes enables estimates of the bulk shear strain to be evaluated and models of progressive deformation to be assessed.     

Cenozoic wrench tectonics and oroclinal bending in SE Korea

Based on fault geometry, petrography, and geochronology of granitic rocks as well as palaeomagnetic data from the Gyeongsang Basin, two conjugate fault sets are explained as a reflection of NNE-trending right-lateral wrench tectonics. According to this interpretation, the Gaum and Yangsan fault sets correspond to antithetic faulting by R′-shear and synthetic faulting by R-shear, respectively; they have rotated clockwise and counterclockwise, respectively, due to NE–SW compression (shortening), as a result of a NNE-trending wrenching force (simple shear). During progressive deformation, NS- or NNW-trending strike–slip faulting by P-shear occurred in the Yeongyang sub-basin, and finally the Yangsan fault formed as a wrench fault bisecting the P-shear and R-shear directions. Extension of the faults (R-shear, striking ～N22°E) generated by block rotation on the east side of the Yangsan fault (wrench fault, striking ～N13°E) resulted in convex eastward deflections. We suggest that this was caused by oroclinal bending of the existing faults generated by block rotations in opposite directions and is inferred to have been closely related to the East Sea (i.e. Sea of Japan) opening.     

Palaeomagnetic studies of fold development and propagation in the Pembrokeshire old red Sandstone

The geometry of two folds in lower Devonian Old Red Sandstone in Pembrokeshire, deformed in the Hercynian, has been defined at intermediate stages during their evolution by this preliminary palaeomagnetic study. This is possible because remagnetization appears to have occurred in discrete episodes during deformation and the shape can be reconstructed by restoring the fold limbs to an angle at which the remagnetization directions coincide. The plunge of the folds is shown to vary considerably during evolution, one fold having an early easterly plunge which changed to the present westerly plunge, the other fold having an early plunge which was more steeply to the west than its present attitude. Clockwise rotation of the whole of southern Pembrokeshire by 40° towards the end of, or since, the Hercynian deformation, is indicated by the palaeomagnetic data and a structural model for this is proposed.     

Cleavage-fold relationships and their implications for transected folds: an example from southwest Virginia,U.S.A.

A non-coaxial deformation involving pre-folding initiation of cleavage perpendicular to bedding is proposed to explain non-axial planar cleavage associated with mesoscopic folds in part of the Appalachian foreland thrust-belt of southwest Virginia. Folds are gently plunging, asymmetric, upright to slightly inclined, sinusoidal forms with non-axial fanning cleavage. They show extreme local variations in type and degree of transection and the consistency of transection direction. These relations are further complicated by hinge migration.Cleavage-fan angles, bedding-cleavage angles and δ transection values appear influenced by fold tightness, and in part by fold flattening strain. Fold flattening increments are considered simultaneous with folding. Axial surface traces, and not cleavage traces, coincide with the principal extension direction in fold profiles. Geometric modelling of cleavage fanning and bedding-cleavage angle variations for various theoretical folding modes suggest that folding in limestone and sandstone layers was by tangential longitudinal strain. Significant shape modification and change in bedding-cleavage relations occurred after limb dips of 40 and 50° were attained in limestone and sandstone respectively. Mud-rock class 1C folds with convergent cleavage fans show features transitional between buckling and flexural flow. Initiation of ‘cleavage’ fabrics during layer-parallel shortening prior to significant folding may be important for cleavage evolution in some deformed rocks.     

3-D geomechanical restoration and paleomagnetic analysis of fault-related folds: An example from the Yanjinggou anticline,southern Sichuan Basin

We examine the development of the Yanjinggou anticline, a fault-propagation-fold in the southern Longmen Shan, through an integrated study of structural geometry, strain, and paleomagnetism. The 3-D structural and strain restoration models generated in our analysis reveal that the NE-trending Yanjinggou fold has a curved map trace that is convex to the southeast. The fold has three distinct regions characterized by different strain patterns: contraction in the core of the fold, extension in the outer arc, and a forelimb with distributed shear. To further understand the kinematics of the Yanjinggou anticline, we performed paleomagnetic analysis on 184 oriented samples collected across the structure. Anisotropy of magnetic susceptibility (AMS) measurements and stepwise thermal demagnetization were conducted. A strike test was applied to the high temperature component (HTC) in order to identify rotation around the arc. The result indicates that the Yanjinggou anticline is a progressive arc, with a minor initial curvature and a dominant secondary curvature related to vertical-axis rotation synchronous with thrusting. The primary curvature and initial development of the structure correlates with the growth of the southern Longmen Shan in Late Miocene. The secondary curvature correlates with displacement extending since Late Pleistocene toward the southeast into the central basin along the detachments that underlie the structure. Lateral gradients in displacement along this underlying detachment provide a mechanism for producing the vertical rotation of the anticline. AMS results and historical earthquake analysis imply that the fault-propagation fold, along with other NE trending structures in the southern Sichuan basin, are tectonically active and accommodate east-west crustal shortening in the basin. By integrating 3-D structural and strain restoration modeling with systematic AMS and paleomagnetic methods using statistical analysis, we closely constrain how the Yanjinggou anticline developed, and provide insights into the formation of fault-related folds with curved shapes in map view, which are common in other fold-and-thrust belts around the world.     

Physical Modeling of Fold-and-Thrust Belt Evolution and Triangle Zone Development:Dabashan Foreland Belt(Northeast Sichuan basin,China) as an Example

Triangle zones,generally found in foreland fold-and-thrust belts,serve as favorable objects of petroleum exploration.Taking the Dabashan foreland belt as an example,we studied the formation and development of triangle zones,and investigated the effect of decollements and the mechanical contrast of lithology by employing the method of physical modeling.Four experimental models were conducted in the work.The results showed that ’sand wedges’ grew episodically,recorded by deformational length,height and slope angle.The height versus shortening rate presented an S-shape curve,and uplifting occurred successively in the direction of the foreland belt.During the formation of the triangle zone,layer-parallel shortening took place at the outset;deformation decoupling then occurred between the upper and lower brittle layers,divided by a middle-embedded silicone polymers layer.The upper brittle layers deformed mainly by folding,while the lower sand layers by thrusting. As shortening continued,the geometry of a triangle zone was altered.We consider that the triangle zone in the Dabashan foreland belt was modified from an early one based on available seismic profiles and the experimental results.In addition,decollements and mechanical contrast impose significant influence on structural development,which can directly give rise to structural discrepancies.More decollements and obvious mechanical contrast between brittle layers can promote the coupling between the upper and lower brittle layers.Basal decollement controls the whole deformation and decreases the slope angle of the wedge,while roof decollement determines whether a triangle zone can be formed.     

Quartz c-axis fabric development and large-scale post-nappe folding (Wandfluhhorn Fold,Penninic nappes)

Quartz c-axis fabrics have been investigated within a suite of quartz veins and monomineralic layers around a major post-nappe fold hinge (the Wandfluhhorn Fold) in the Bosco area (Swiss-Italian border) within the lower Penninic nappes.Two kinematic domains which are separated by the axial plane trace of the Wandfluhhorn Fold are recognized; on the lower limb the measured quartz c-axis fabric asymmetry indicates a sense of shear in which the overlying layers move to the southwest (i.e. top-to-SW) whereas on the upper limb the shear sense is reversed with the top moving to northeast. The shear direction (N60°E–N80°E), however, is constant in both areas and oblique to an older stretching lineation as well as to the D₃ fold hinge. Such a distribution of asymmetric quartz c-axis fabrics and the constant orientation of their interpreted shear direction, which is apparent only from the fabric data and not from field evidence, indicates fabric development pre- or early syn-Wandfluhhorn folding, with subsequent folding and modification of the existing textures and possibly rotation of the initial fold axis.An overall westward-directed shear has been suggested for the whole of the Lepontine Alps. However, this study demonstrates that this simple general pattern has been modified locally by later folding. It also demonstrates that the dominant lineation may be a finite stretching lineation due to more than one phase of deformation and is not necessarily related to any particular transport direction.     

南天山山前冲断带的构造样式及成因探讨

塔里木盆地南天山山前冲断带东西分段、南北分带.受走滑断裂控制,自西向东分为喀什北缘、西克尔区段、柯坪断隆主体、温宿凸起和库车坳陷.受南天山逆掩推覆作用影响,发育多排NE向构造带,喀什北缘主要发育乌恰、阿图什、喀什3排构造带,柯坪断隆主体发育3排古生界逆冲褶皱带,库车坳陷主要由北部单斜带、克拉苏—依奇克里克、秋里塔格构造带组成.由于山前带基底结构和构造运动的差异,造成了各区段地层分布的不均衡,普遍发育的逆冲断裂和走滑断裂,使得地质结构和构造样式更为复杂,多套塑性地层对区带展布和构造变形起到了重要作用.     

Re‐orientation of the extension direction and pure extensional faulting at oblique rift margins: comparison between the Main Ethiopian Rift and laboratory experiments

In this study, we draw on a unique combination of well‐resolved fault‐slip data and earthquake focal mechanisms to constrain spatial variations in style of faulting in the obliquely extending Main Ethiopian Rift, East Africa. These data show that both boundary and internal faults – oblique and orthogonal to the plate divergence (PD) respectively – exhibit almost pure dip‐slip motion, and indicate significant local deflection in orientation of the extension direction at rift margins. Scaled analogue models closely replicate the multidisciplinary observations from the rift and suggest that the process is controlled by the presence of a deep‐seated, pre‐existing weakness – oblique to the direction of PD – that is able to cause a local rotation in the orientation of the extension direction at rift margins. Minor counterclockwise block rotations are required to accommodate the difference in slip direction along the different fault systems, as supported by existing and new palaeomagnetic data from the rift.     

Early formed regional antiforms and synforms that fold younger matrix schistosities: their effect on sites of mineral growth

In the metamorphic cores of many orogenic belts, large macroscopic folds in compositional layering also appear to fold one or more pervasive matrix foliations. The latter geometry suggests the folds formed relatively late in the tectonic history, after foliation development. However, microstructural analysis of four examples of such folds suggests this is not the case. The folds formed relatively early in the orogenic history and are the end product of multiple, near orthogonal, overprinting bulk shortening events. Once large macroscopic folds initiate, they may tighten further during successive periods of sub-parallel shortening, folding or reactivation of foliations that develop during intervening periods of near orthogonal shortening. Reactivation of the compositional layering defining the fold limbs causes foliation to be rotated into parallelism with the limbs.Multiple periods of porphyroblast growth accompanied the multiple phases of deformation that postdated the initial development of these folds. Some of these phases of deformation were attended by the development of large numbers of same asymmetry spiral-shaped inclusion trails in porphyroblasts on one limb of the fold and not the other, or larger numbers of opposite asymmetry spirals on the other limb, or similar numbers of the same asymmetry spirals on both limbs. Significantly, the largest disparity in numbers from limb to limb occurred for the first of these cases. For all four regional folds examined, the structural relationships that accompanied these large disparities were identical. In each case the shear sense operating on steeply dipping foliations was opposite to that required to originally develop the fold. Reactivation of the folded compositional layering was not possible for this shear sense. This favoured the development of sites of approximately coaxial shortening early during the deformation history, enhancing microfracture and promoting the growth of porphyroblasts on this limb in comparision to the other. These distributions of inclusion trail geometries from limb to limb cannot be explained by porphyroblast rotation, or folding of pre-existing rotated porphyroblasts within a shear zone, but can be explained by development of the inclusion trails synchronous with successive sub-vertical and sub-horizontal foliations.     

New Early Permian paleomagnetic results from the Brive basin (French Massif Central) and their implications for Late Variscan tectonics

In order to assess the structural evolution of the Brive basin and the Paleozoic activity of surrounding major faults in the French Massif Central, we carried out a paleomagnetic study on Early Permian rocks from this basin. Positive-fold tests and solely reversed polarities indicate that the characteristic remanent magnetization is likely to be primary. Early Permian tilt-corrected site mean declinations vary from 207°–167° indicating that the Brive basin experienced internal vertical-axis rotations. On the contrary, Late Permian paleomagnetic site means exhibit a circular Fisherian distribution showing no relative rotations. Detailed analyses of Permian paleomagnetic data from five contemporaneous basins of the French Massif Central reveal that these basins share the same equatorial paleolatitude with stable Europe throughout the Permian. However, in Early Permian, three of the five basins experienced differential rotations. The Saint-Affrique basin not only suffered internal deformation during the Early Permian, but the basin as a whole underwent a full-scale counterclockwise vertical-axis block rotation with respect to stable Europe. As a consequence, paleomagnetic data from similar late orogenic basins have to be thus carefully considered for establishment of Apparent Polar Wander paths.     

A unified kinematic model for the evolution of detachment folds

Detachment folds represent a major structural element in a number of fold belts. They are common in the Jura Mountains, the Zagros fold belt, the Central Appalachian fold belt, the Wyoming fold-belt, the Brooks Range, the Parry Islands fold belt, and parts of the SubAndean belt. These structures form in stratigraphic packages with high competency contrasts among units. The competent upper units exhibit parallel fold geometries, whereas the weak lower unit displays disharmonic folding and significant penetrative deformation. Two distinct geometric types, disharmonic detachment folds, and lift-off folds have been recognized. However, these structures commonly represent different stages in the progressive evolution of detachment folds. The structures first form by symmetric or asymmetric folding, with the fold wavelength controlled by the thickness of the dominant units. Volumetric constraints require sinking of units in the synclines, and movement of the ductile unit from the synclines to the anticlines. Continuing deformation results in increasing fold amplitudes and tighter geometries resulting from both limb segment rotation and hinge migration. Initially, limb rotation occurs primarily by flexural slip folding, but in the late stages of deformation, the rotation may involve significant internal deformation of units between locked hinges. The folds eventually assume tight isoclinal geometries resembling lift-off folds. Variations in the geometry of detachment fold geometry, such as fold asymmetry, significant faulting, and fold associated with multiple detachments, are related to variations in the mechanical stratigraphy and pre-existing structure.