Lancelot—a seabed piezometric probe for geotechnical studies

A seabed instrument called Lancelot has been developed to measure pore pressure characteristics within potentially unstable marine sediment deposits, in any water depth. An estimate of the coefficient of consolidation can be obtained from the sediment pore pressure dissipation response that occurs following penetration into the seabed. This data can be used to calculate the coefficient of hydraulic conductivity, which is useful in analyzing the seepage velocity of pore fluids moving within the sediment mass. Pore-water pressures in excess of the normal hydrostatic profile are detected and used in static and dynamic liquefaction analyses, with a view toward understanding the origin of unusual seabed features such as pockmarks, as well as short-term instability caused by wave loading. An example of static liquefaction due to seepage stress is given for sites in and adjacent to the well-known 1929 Grand Banks debris flow, along with an example of incomplete liquefaction caused by dynamic wave loading within Miramichi Inner Harbor, New Brunswick. The adoption of in situ measurement techniques is shown to produce data of a quality not normally obtainable from recovered core samples, due to pressure relief and sampling disturbance effects.     

Physical properties of the shallow sediments in late Pleistocene formations,Ursa Basin,Gulf of Mexico,and their implications for generation and preservation of shallow overpressures

Understanding the evolution of abnormally high fluid pressures within sedimentary formations is critical for analysing hydrogeological processes and assessing drilling risks. We have constructed a two-dimensional basin model and have performed numerical simulations to increase the understanding of the history of fluid flow and shallow overpressures in the Pleistocene and Holocene formations in the Ursa basin, deepwater Gulf of Mexico. We measured physical properties of sediments, such as porosity and permeability, in the laboratory and estimated in situ pore pressures from preconsolidation pressures. We obtained porosity–effective stress relationships from measurements of bulk density, grain density and preconsolidation pressures in the laboratory. Porosity–effective stress relationships were also obtained from downhole density logs and measured pore pressures. The porosity–effective stress and porosity–permeability relationships obtained were applied in two-dimensional basin simulations. Results showed that high pore pressures developed shortly after sediment deposition. Peaks in pore pressure ratios were related to high sedimentation rates of mass transport deposits and the incision of the Ursa channel. Lateral flows from the area where the overburden is thick towards the area where it is thin have occurred at least since 30 ka. Present pore pressure and temperature distributions suggest that lateral flows play a role in re-distributing heat in the basin.     

High pressure-high temperature laboratory apparatus for the measurement of deep sea sediment physical properties

Laboratory equipment has been built which will measure the permeability and thermal conductivity of deep-sea sediments at their in-situ conditions of hydrostatic pressure, temperature, and void ratio. The apparatus has the capability of uniaxially consolidating a sediment sample to simulate compaction within the sediment column, while exposing the specimen to hydrostatic pressures ranging from atmospheric to 62 MPa and to temperatures from 22 to 220°C. The equipment includes a hypodermic needle mounted vertically through the base of the pressure vessel from which thermal conductivity is determined by the needle probe method. The system also features a combination of dead-weight testers which produces a small hydraulic gradient across the sample and permits the measurement of sediment permeability at large hydrostatic pressures.The physical property data generated from this apparatus will be important in understanding the mechanisms of heat transfer through the ocean floor and in analysing the coupled flow of heat and pore fluid in the vicinity of a heat source, such as a radioactive waste canister, buried in the seabed.     

Advective pore water input of nutrients to the Satilla River Estuary,Georgia, USA

In situ benthic flux measurements, pore water nutrient profiles, water column nutrient distributions, sediment grain size distributions and side-scan sonar observations suggest that advective transport of pore waters may be a major input pathway of nutrients into the Satilla River Estuary (coastal Georgia, USA). In situ benthic chamber incubations demonstrate the occurrence of highly variable, but occasionally very large sea floor fluxes of silicate, phosphate, and ammonium. Locally occurring benthic microbial mineralization of organic matter, as estimated by S³⁵-sulphate reduction rate measurements, is insufficient to support these large fluxes. We hypothesize that the observed interlayering of permeable, sandy sediments with fine-grained, organic-rich sediments in the estuary provides conduits for advective transport of pore water constituents out of the sediments. Because permeable layers may extend significant distances beneath the salt marsh, the large fluxes observed may be supported by remineralization occurring over large areas adjacent to the estuary. Advective transport may be induced by pressure gradients generated by a variety of processes, including landward recharge by meteoric or rain waters if sand layers extend far enough into the maritime coastal lands. Alternatively, tidal variations across the salt marsh sediment surface may hydraulically pump water through the sediment system. Because these fluxes appear to be concentrated into small layers, this source may be a significant input of nutrients to the estuary even if permeable, sandy layers comprise a very small proportion of the seabed.     

Discussion of “formation mechanism of large pockmarks in the subaqueous Yellow River Delta”

Abstract

The excess pore pressure accumulation is a key factor when estimating the formation mechanism of large pockmarks, as it determines the liquefaction potential of marine sediments due to water waves. The governing equations for excess pore pressure may have different forms for various types of sediments and then shall reflect the cyclic plasticity of the soil. For water waves propagating over a porous seabed, the liquefaction area induced by waves is generally progressive, which indicates that the liquefaction area will move forward following the wave train. Therefore, the excess pore pressure accumulation can be used to explain the occurrence of the large pockmarks, but the dimension of the pockmark may be related to the heterogeneity of sediment or the wave properties affected by the topography in the subaqueous Yellow River Delta.     

电阻率法监测黄河口海床沉积物固结过程现场试验研究

为了研究黄河口海床沉积物固结过程中电阻率同工程力学性质指标的对应关系,探索海床土体固结过程的新型原位监测技术,本文在黄河刁口流路三角洲叶瓣潮坪上,现场取土配置黄河口快速沉积形成的流体状沉积物和观测研究粉质土海床的固结过程。利用静力触探、十字板剪切试验、孔隙水压力监测等原位土工测试手段,实时测定固结过程中海床土强度变化和孔隙水压力消散过程;同时通过埋置自行研制的环形电极探杆,实时测定海床土固结过程中的电阻率变化。通过对比分析海床土电阻率与工程力学性质指标的同步测定数据发现:黄河口饱和粉土的电阻率与微型贯入试验测得的土体贯入强度,静力触探试验测得的比贯入阻力,十字板剪切试验测得的不排水抗剪强度(峰值强度、残余强度)均呈乘幂关系,且相关性良好;海床沉积物在固结过程中的电阻率与孔隙水压力呈负线性相关性。     

人工岛建设对海口湾沉积特征与泥沙运移的影响

近年来,人工岛被广泛应用于沿海地区的填海造陆工程以快速获得优质土地,但大面积的人工岛建设会对近岸海底沉积物的分布模式及输运过程产生重要影响.为认识人工岛建设后沉积物变化与运移特征,本文以南海明珠人工岛对海口湾的影响为例,根据人工岛建设前后分别在海口湾近岸采集的底质表层沉积物分析了沉积物特征变化,结合沉积动力分析及粒径趋...     

内孤立波浅化破碎过程斜坡沉积物孔压响应特征实验分析

观测资料显示内孤立波沿斜坡浅化过程对海底沉积物的作用犹如一台水中吸尘器,在破碎转换阶段达到最强,甚至会触发一系列地质活动,引发地质灾害。为界定此过程中沉积物的动力响应特征和影响因素,在大型重力式分层流水槽中模拟不同振幅内孤立波和不同类型沉积物斜坡连续作用过程,利用孔隙水压力采集系统实时记录孔隙水压力变化,对比分析不同水动力、坡度、沉积物类型情况下沉积物中超孔压变化特征。分析结果表明,内孤立波破碎过程,破波位置海床表层波压力和不同深度超孔隙水压力都存在相似的"U"型负压力变化过程;破碎波经过位置沉积物表现为和表面波压力正相关的孔压响应特征。破碎点沉积物中超孔压幅值随深度减小,约在6%波长深度位置减少到坡面压力的50%。超孔压幅值和内孤立波振幅、沉积物类型和斜坡度密切相关,坡度由0.071变化到0.160时,波压力幅值可增大至1.6倍。内孤立波振幅变化不影响不同类型海床土动力响应规律,只与超孔隙水压力值大小有关,内孤立波对海床的动力作用可认为弹性作用。     

Experimental Studies of Sound Attenuation in Seabed Sediments on Column Sample Length Scale

Seabed sediment microstructure has an influence on its acousto-physical properties, and the properties in a length of the sediment column reflect an aspect of the macroscopic behavior of the microstructure. An original measurement method of the sound attenuation within small distance cross sections in a sediment column, and the corresponding approach in data processing to attain an attenuation factor are detailed in the paper. This method was used to measure the compressional wave in series of points with a small distance in the sediment column, and it is shown that exponential attenuation is a type of compressional wave attenuation model for a sediment column in its full length. It indicates that there are various models of compressional wave attenuation in seabed sediments in the South China Sea after comparison of data from other literature. The method of measuring sound attenuation satisfies the sampling space interval in the acoustical forward and inverse problems in seabed sediments, and the original method provides a new approach for finding out sound attenuation mechanism in seabed sediments on small length scale.     

Experimental investigation on the wave-induced pore pressure around shallowly embedded pipelines

A series of regular wave experiments have been done in a large-scale wave flume to investigate the wave-induced pore pressure around the submarine shallowly embedded pipelines.The model pipelines are buried in three kinds of soils,including gravel,sand and silt with different burial depth.The input waves change with height and period.The results show that the amplitudes of wave-induced pore pressure increase as the wave period increase,and decay from the surface to the bottom of seabed.Higher pore pressures are recorded at the pipeline top and the lower pore pressures at the bottom,especially in the sand seabed.The normalized pressure around pipeline decreases as the relative water depth,burial depth or scattering parameters increase.For the silt seabed,the wavelet transform has been successfully used to analyze the signals of wave-induced pore pressure,and the oscillatory and residual pore pressure can be extracted by wavelet analysis.Higher oscillatory pressures are recorded at the bottom and the lower pressures at the top of the pipeline.However,higher residual pressures are recorded at the top and the lower pressures at the bottom of the pipeline.     

波浪作用下海床孔压累积过程离散元数值模拟

海床土层在波浪的循环荷载作用下会逐渐累积孔压,降低土层的稳定性,并威胁海上工程。为了研究孔隙水压力的累积机制,本文提出离散元孔隙密度流方法,并改进研发离散元分析软件MatDEM,实现了海床沉积物孔压的累积过程模拟。基于现场试验装置及土体力学参数建立离散元模型,通过对比试验和数值模拟结果发现:对海床沉积物施加波浪荷载后,表层土体中产生较高孔压,并逐渐向深层传递;在循环波浪荷载作用下,土颗粒间孔压累积范围逐渐增加;当孔压累积时间足够长时,土层中孔压收敛于所施加最大荷载与最小荷载的平均值,此时若孔压达到初始有效应力,土体将发生液化,内部土颗粒成为再悬浮沉积物;在周期性波浪荷载作用下,土颗粒液化悬浮后发生移动,浅层颗粒位移量大,土体整体表现为圆弧形移动。     

Wave‐induced instability of seabed: Mechanism and conditions

Abstract

The instability of the seabed constitutes an important consideration in the planning and design of various offshore facilities. The stresses and the pore water pressure in the sediments, induced by the action of waves during a storm, may cause them to fail, leading to seabed instability. In this article the possible mechanism of such failures are discussed and the conditions necessary for them are formulated through simplified analyses. These provide the combinations of wave, site, and sediment parameters likely to cause instability, which may be used to identify potentially unstable sediments in a given offshore region during a storm. The numerical results are presented in convenient graphical form. Some illustrative field studies are also presented.     

Formation mechanism of large pockmarks in the subaqueous Yellow River Delta

Abstract

We have identified large pockmarks in an area of approximately 0.3?km² in the subaqueous Yellow River Delta in the Chengdao Sea. Gas eruption channels not been identified in the sediment layers in this area, and the formation mechanism of these large pockmarks remains unknown. To study the formation mechanism of these large pockmarks, we constructed a layered silty sediment model composed of appropriate geological materials. Then, we calculated the stress, displacement, and excess pore pressure in the layered silty sediment from the surface to a depth of 10?m using the Biot theory. A comparative analysis of the calculated results and the data measured in the field was then performed. Based on these results, we established a new formation mechanism for the large pockmarks. With the occurrence of storm waves, two extreme areas of displacement and excess pore pressure appeared in the layered silty sediment. These extreme values increased quickly in the seabed during the continuous action of storm waves. When the excess pore pressure surpassed the effective stress, the top silty layer instantly liquefied and then reconsolidated. Then, when the pore pressure of the interface position exceeded the effective stress produced by the overlying sediment, the sediments experienced “sand boil” damage. With the repeated action of strong waves, the boundary of the pockmark continued to expand, forming a large and stable pockmark. This work is of great value for further understanding and mitigating marine geologic hazards, such as coastal erosion, silt deposition, and unstable sediment, in the subaqueous Yellow River Delta.     

探头尺寸对FFP确定海底沉积物性质影响的原位试验研究

自落式贯入仪(Free-Falling Penetrometer, FFP)是一种新型海底沉积物原位测量设备,用于海底沉积物工程性质原位调查。本文基于自主研发的FFP设备在黄海海域开展现场贯入试验,分析探头尺寸对判断沉积物性质的影响。研究表明,在不同沉积物中探头尺寸对贯入深度、贯入阻力和沉积物类型判断有不同影响。在细粒沉积物中探头尺寸对贯入深度、贯入阻力影响较小;在根据贯入阻力变化划定分层时,小直径探头能反应贯入阻力更为细小的变化。在粗粒沉积物中探头尺寸影响更明显,大尺寸探头使贯入阻力变大,贯入深度减小。根据标准化深度和硬度因子可区分粗粒沉积物和细粒沉积物,在粗粒沉积物中探头尺寸增大,硬度因子减小,有利于细化沉积物类型。     

Hydrodynamic forces on concrete sea wall and breakwater during earthquakes: effects of bottom sediment layers and back-fill soil

The objective of this paper is to present the effect of sediment characteristics on the dynamic response of sea walls and breakwaters during earthquakes. A finite-difference method is used to calculate the earthquake-induced hydrodynamic pressures of seawater and the pore water in seabed sediment. The water-filled soil mixture is used to model sediment and back-fill soil. The dynamic response of a rigid coastal structure induced by constant ground acceleration is studied, using variable sediment depths and porosity. The dynamic characteristics of the water–embankment–sediment system are investigated, applying four earthquake-records as exciting forces. The result of a quay-walled caisson demonstrates the significance of the seismic-induced dynamic force and the seismic effects should be considered for the design of coastal structures in seismic zone. The damaged wharves of Taichung Port during Chi-Chi earthquake, 21 September 1999 is also reported in the paper.     

小尺度海底沉积物的声衰减特性研究

为研究小尺度海底沉积物样品的声衰减特性,作者提出了用声学探针测量海底沉积物声波幅值的新方法,对沉积物样品扰动小,两个测量点的距离可小于波长,为海底沉积物微观声衰减测量提供了新手段。作者用小于波长的间隔逐点测量了沉积物的压缩波幅值,数据分析表明沿沉积物柱状样全长的声衰减满足指数衰减模型。目前主要用同轴差距衰减测量法获得海底沉积物声衰减数据,但该方法不能辨识声衰减模型,因此不同海区的测量结果难以建立联系。对此作者又提出用声吸收系数反演的幅值比与声衰减系数反演的R值(两种幅值比的比值)作评价依据,分析了垂直轴差距衰减测量法获得的南海海底沉积物声衰减测量数据,发现部分沉积物样品声衰减的R值远大于1,其声衰减不满足指数衰减模型。在声衰减满足指数衰减模型的条件下,用Hamilton的声衰减和频率经验公式预报的南海沉积物声衰减比与作者用声学探针测量海底沉积物所得的声衰减比对比,通过对R值分析得出Hamilton的声衰减和频率经验公式可以预报南海沉积物声衰减比的范围。作者提出的声学探针测量海底沉积物声衰减的方法的优点是既能获得声衰减数据又能辨识声衰减模型,不同海区测量的沉积物声衰减比可用R值建立联系。     

Fundamental response of pore-water pressure to microfabric and permeability characteristics: Eckernförde Bay

Ambient and dynamic in situ pore pressures were measured, and microfabric was examined in finegrained, shallow-water sediment in Eckernförde Bay, Germany. In situ permeabilities were calculated from piezometer data. Pore-water pressure decay times in sediments 0.5–1.0 m subbottom are indicative of clayey materials. Shallower sediments, although of similar classical grain size as the deeper sediments, have quicker decay times typical of silty marine sediment. Pore pressure response is a function of the microfabric, porometry, and sediment permeability. Aggregates (composed of fine-grained material, biota, and extracellular polymers) produce large pores and complex microstructure, resulting in effective permeabilities characteristic of silts.     

In situ geotechnical characterization of sediments on the Nova Scotian Slope, eastern Canadian continental margin

A seabed 2-m-long cone penetrometer and coring system (Geotechnical Module) has been used at 17 stations in four transects on the Scotian Slope to characterise in situ shear strength and induced pore pressure on several different types of late Pleistocene and early Holocene failure. Study sites were selected using the SAR high-resolution deep-towed acoustic system equipped with a digital 160–190 kHz sidescan sonar and a 3.5 kHz subbottom profiler.

Several distinctive types of “geotechnical signature” were recognised from plots of cone resistance and induced pore pressure with depth in the sediment. Normally consolidated sediments show a progressive increase in cone resistance with depth (to about 75 kPa at 2 m subbottom). Holocene surficial muds show spectacular apparent overconsolidation, reaching a peak of 250 kPa at about 50 cm subbottom and then decreasing down to 1.5 m. This overconsolidation is associated with Zoophycos burrows. Late Pleistocene sediments exhumed by bedding plane slides show strong true overconsolidation consistent with the original depth of burial inferred from high-resolution seismic stratigraphy. Debris flows show only a slight shear stress gradient with depth (40–45 kPa over 0.5–1 m subbottom) with under-consolidation due to remoulding of sediment.     

Initial results and progress of the Mississippi delta sediment pore water pressure experiment

Abstract

This report describes the instrumentation, initial results, and progress of an experiment designed to measure and monitor submarine sediment pore water and hydrostatic pressures in a selected area of the Mississippi Delta. The experiment also is intended to monitor significant pressure perturbations during active storm periods. Initial analysis of the data revealed excess pore water pressures in the silty clay sediment at selected depths below the mudline. Continuous monitoring of the pore water and hydrostatic pressures was expected to reveal important information regarding sediment pore water pressure variations as a function of the geological processes active in the Mississippi Delta.