Magnesium stable isotope fractionation in marine biogenic calcite and aragonite

This survey of magnesium stable isotope compositions in marine biogenic aragonite and calcite includes samples from corals, sclerosponges, benthic porcelaneous and planktonic perforate foraminifera, coccolith oozes, red algae, and an echinoid and brachiopod test. The analyses were carried out using MC-ICP-MS with an external repeatability of ±0.22‰ (2SD for δ²⁶Mg; n = 37), obtained from a coral reference sample (JCp-1).Magnesium isotope fractionation in calcitic corals and sclerosponges agrees with published data for calcitic speleothems with an average Δ²⁶Mg_{calcite-seawater} = −2.6 ± 0.3‰ that appears to be weakly related to temperature. With one exception (Vaceletia spp.), aragonitic corals and sclerosponges also display uniform Mg isotope fractionations relative to seawater with Δ²⁶Mg_{biogenic aragonite-seawater} = −0.9 ± 0.2.Magnesium isotopes in high-Mg calcites from red algae, echinoids and perhaps some porcelaneous foraminifera as well as in all low-Mg calcites (perforate foraminifera, coccoliths and brachiopods) display significant biological influences. For planktonic foraminifera, the Mg isotope data is consistent with the fixation of Mg by organic material under equilibrium conditions, but appears to be inconsistent with Mg removal from vacuoles. Our preferred model, however, suggests that planktonic foraminifera synthesize biomolecules that increase the energetic barrier for Mg incorporation. In this model, the need to remove large quantities of Mg from vacuole solutions is avoided. For the high-Mg calcites from echinoids, the precipitation of amorphous calcium carbonate may be responsible for their weaker Mg isotope fractionation.Disregarding superimposed biological effects, it appears that cation light isotope enrichments in CaCO₃ principally result from a chemical kinetic isotope effect, related to the incorporation of cations at kink sites. In this model, the systematics of cation isotope fractionations in CaCO₃ relate to the activation energy required for cation incorporation, which probably reflects the dehydration of the cation and the crystal surface and bond formation at the incorporation site. This kinetic incorporation model predicts (i) no intrinsic dependence on growth rate, unless significant back reaction upon slow growth reduces the isotope fractionation towards that characteristic for equilibrium isotope partitioning (this may be observed for Ca isotopes in calcites), (ii) a small decrease of isotope fractionation with increasing temperature that may be amplified if higher temperatures promote back reaction and (iii) a sensitivity to changes in the activation barrier caused by additives such as anions or biomolecules or by the initial formation of amorphous CaCO₃.     

Conditions of meteoric calcite formation along a Variscan fault and their possible relation to climatic evolution during the Jurassic–Cretaceous

Two calcite cements, filling karst cavities and replacing Lower Carboniferous limestones at the Variscan Front Thrust, were precipitated after mid-Jurassic Cimmerian uplift and subsequent erosion but before late Cretaceous strike-slip movement. The first calcite (stage A) is nonferroan and crystals are coated by hematite and/or goethite. These minerals also occur as inclusions along growth zones. The calcite lattice contains < 0·07 mol.% Fe, but Mn concentrations can be as high as 0·72 mol.% in bright yellow luminescent zones. Primary, originally one-phase, all-liquid, aqueous inclusions have a final melting temperature between ?0·2° and +0·2 °C, indicating a meteoric origin of the ambient water. The δ¹³C and δ¹⁸O values of the calcites are between ?7·3‰ and ?6·3‰, ?7·8‰ and ?5·5‰ on the Vienna PeeDee Belemnite (VPDB) scale, respectively. The second calcite (stage B) consists of ferroan (0·13–0·84 mol.% Fe) blocky crystals with Mn concentrations between 0·34 and 0·87 mol.%. Primary, single-phase aqueous fluid inclusions indicate precipitation from a meteoric fluid below 50 °C . The δ¹³C values of stage B calcites vary between ?7·3‰ and ?2·1‰ VPDB and the δ¹⁸O values between ?7·9‰ and ?7·2‰ VPDB. A precipitation temperature below 50 °C for the stage A calcites and the presence of iron oxide/hydroxide inclusions in the crystals indicate near-surface precipitation conditions. Within this setting, the geochemistry of the nonferroan stage A calcites reflects precipitation under oxic to suboxic conditions. The ferroan stage B calcites precipitated in a reducing environment. The evolution from the stage A to stage B calcites and the associated geochemical changes are interpreted to be related to the change from semiarid to humid conditions in western Europe during late Jurassic–Cretaceous times. A change in humidity can explain the evolution of groundwater from oxic/suboxic to reducing conditions during calcite precipitation. The typically higher δ¹³C values of the stage B compared to the stage A calcites can be explained by a smaller contribution of carbon derived from soil-zone processes than from carbonate dissolution in the groundwater under humid conditions. The small shift to lower δ¹⁸O between stage A and B calcites may be caused by a higher precipitation temperature or a decrease in the δ¹⁸O value of the meteoric water. This decrease could have been caused by a change in the source of the air masses or by an increase in the amount of rainfall during the early mid-Cretaceous. Although the latter interpretation is preferred, it cannot be proven.     

Isotopic and morphological features of fracture calcite from granitic rocks of the Tono area,Japan: a promising palaeohydrogeological tool

This study aimed to develop a methodology for assessing the hydrochemical evolution of a groundwater system, using fracture-filling and fracture-lining calcite. Fracture calcite in deep (to ca. 1000 m) granitic rocks of the Tono area, central Japan, was investigated by optical and electron microscopy, and chemical and isotopic analysis. Coupled with geological evidence, these new data imply 3 main origins for the waters that precipitated calcite: (1) relatively high-temperature hydrothermal solutions, precipitating calcite distinguished by δ¹⁸O_SMOW from −3 to ca. 10‰, and with δ¹³C_PDB from ca. −18 to −7‰; (2) seawater, probably partly of Miocene age, which precipitated calcite distinguished by δ¹³C_PDB of ca. 0‰ and δ¹⁸O_SMOW > ca. 20‰; (3) fresh water, with a variable δ¹³C_PDB composition, but which precipitated calcite distinguished by δ¹³C_PDB that was significantly < 0‰ and as low as ca. −29‰ and δ¹⁸O_SMOW > ca. 17‰. Data for ¹⁴C suggest that at least some of the fresh-water calcite formed within the last 50 ka. The present day hydrogeological regime in the Tono area is also dominated by fresh groundwater. However, the marine calcite of probable Miocene age found at depth has shown no evidence for dissolution and many different calcite crystal forms have been preserved. Studies of other groundwater systems have correlated similar crystallographic variations with variations in the salinity of coexisting groundwaters. When this correlation is applied to the Tono observations, the calcite crystal forms imply a similar range of groundwater salinity to that inferred from the isotopic data. Thus, the present study suggests that even in presently low-salinity groundwater systems, calcite morphological variations may record the changing salinity of coexisting groundwaters. It is suggested that calcite morphological data, coupled with isotopic data, could provide a powerful palaeohydrogeological tool in such circumstances.     

Petrological and isotopic implications of some contrasting Late Precambrian carbonates, NE Spitsbergen

The dominantly shallow-marine Vendian succession of NE Spitsbergen contains distinctive types of carbonate rock. Limestones deposited before Vendian glaciation resemble those described from other Upper Proterozoic successions, being high in Sr and inferred to have been originally aragonitic, including the distinctive 5–10 Jim equant polygonal calcite of cemented shrinkage cracks. In contrast, manganoan stromatolitic limestones within marginal-marine glacial-outwash deposits, and consisting of micrite, microspar and fascicular-optic calcite are interpreted as originally calcitic. The restriction of primary marine calcite to cold seawater is comparable with Recent and Permian carbonates, although the Precambrian example formed in a sea diluted with meltwater. There is good textural preservation of relatively ¹⁸O-rich oolitic dolostones which were cemented in a supratidal environment by artesian fluids. Nevertheless, early diagenetic replacement is inferred, immediately prior to a glacial episode. Post-glacial dolostones are either replacive marine, or evaporative lacustrine, but share rather more negative δ¹⁸O values, closer to the mean of Late Precambrian dolostones. The heaviest oxygen isotope values constrain seawater δ¹⁸O to no more negative than — 2 to — 4_SMOW. The main reason for the pronounced oxygen isotopic depletion of most Late Precambrian carbonates is their initial metastable mineralogy. The possibility of determining palaeolatitudes of the enigmatic widespread Late Proterozoic glaciations by isotopic analysis of freshwater periglacial calcareous precipitates is raised. Significant carbon isotope variations reflect changes in depositional water chemistry: some of these could be global in extent.     

Climatic change recorded by stable isotopes and trace elements in a British Holocene tufa

Combined stable isotope (δ¹⁸O and δ¹³C) and trace element (Mg, Sr) geochemistry from bulk tufa calcite and ostracod shell calcite from an early Holocene British tufa reveal clear records of Holocene palaeoclimatic change. Variation in δ¹⁸O is caused principally by change in the isotopic composition of Holocene rainfall (recharge), itself caused mainly by change in air temperature. The δ¹³C variability through much of the deposit reflects increasing influence of soil‐zone CO₂, owing to progressive woodland soil development. Bulk tufa Mg/Ca and Sr/Ca are controlled by their concentrations in the spring water. Importantly, Mg/Ca ratios are not related to δ¹⁸O values and thus show no temperature dependence. First‐order sympathetic relationships between δ¹³C values and Mg/Ca and Sr/Ca are controlled by aquifer processes (residence times, CO₂ degassing and calcite dissolution/reprecipitation) and probably record intensity of palaeorainfall (recharge) effects. Stable isotope records from ostracod shells show evidence of vital effects relative to bulk tufa data. The ostracod isotopic records are markedly ‘spiky’ because the ostracods record ‘snapshots’ of relatively short duration (years), whereas the bulk tufa samples record averages of longer time periods, probably decades. The δ¹⁸O record appears to show early Holocene warming, a thermal maximum at ca. 8900 cal. yr BP and the global 8200 yr BP cold event. Combined δ¹³C, Mg/Ca and Sr/Ca data suggest that early Holocene warming was accompanied by decreasing rainfall intensity. The Mg/Ca data suggest that the 8200 yr BP cold event was also dry. Warmer and wetter conditions were re‐established after the 8200 yr BP cold event until the top of the preserved tufa sequence at ca. 7100 cal. yr BP. Copyright © 2004 John Wiley & Sons, Ltd.     

Superstructures in ankerite and calcite

Two rhombohedral carbonates, ferroan dolomite (ankerite) and magnesian calcite from lower Jurassic ammonites, have been studied by transmission electron microscopy. The samples show small domains with the morphology of platelets parallel to (11 \(\bar 2\) 0) which have exceptionally well ordered superstructures and characteristic c-reflections. Diffraction patterns and contrast analysis of atomic resolution images indicate that the domains observed in ankerite are rich in Ca [Ca_0.75(Mg, Fe)_0.25CO₃] and those in calcite rich in Mg, and there is strong evidence that cation ordering is the cause for the observed superstructures which are proposed mainly on diffraction evidence. Rhombohedral carbonates have a close similarity to NaCl, with CO₃-groups substituting for Cl. Cation ordering patterns can therefore be discussed in analogy to f.c.c. alloys. We make use of ordering waves to describe superstructures and to qualitatively interpret kinetic conditions for their formation.     

Oxygen isotope fractionation in synthetic magnesian calcite

Mg-bearing calcite was precipitated at 25°C in closed system free-drift experiments from solutions containing NaHCO₃, CaCl₂ and MgCl₂. The chemical and isotope composition of the solution and precipitate were investigated during time course experiments of 24-h duration. Monohydrocalcite and calcite precipitated early in the experiments (<8 h), while Mg-calcite was the predominant precipitate (>95%) thereafter. Solid collected at the end of the experiments displayed compositional zoning from pure calcite in crystal cores to up to 23 mol% MgCO₃ in the rims. Smaller excursions in Mg were superimposed on this chemical record, which is characteristic of oscillatory zoning observed in synthetic and natural solid-solution carbonates of differing solubility. Magnesium also altered the predominant morphology of crystals over time from the {104} to {100} and {110} growth forms.The oxygen isotope fractionation factor for the magnesian-calcite-water system (as 10³lnα_Mg-cl-H2O) displayed a strong dependence on the mol% MgCO₃ in the solid phase, but quantification of the relationship was difficult due to the heterogeneous nature of the precipitate. Considering only the Mg-content and δ¹⁸O values for the bulk solid, 10³lnα_Mg-cl-H2O increased at a rate of 0.17 ± 0.02 per mol% MgCO₃; this value is a factor of three higher than the single previous estimate (Tarutani T., Clayton R.N., and Mayeda T. K. (1969) The effect of polymorphims and magnesium substitution on oxygen isotope fractionation between calcium carbonate and water. Geochim. Cosmochim. Acta 33, 987-996). Nevertheless, extrapolation of our relationship to the pure calcite end member yielded a value of 27.9 ± 0.02, which is similar in magnitude to published values for the calcite-water system. Although no kinetic effect was observed on 10³lnα_Mg-cl-H2O for precipitation rates that ranged from 10^3.21 to 10^4.60 μmol · m⁻² · h⁻¹, it was impossible to disentangle the potential effect(s) of precipitation rate and Mg-content on 10³lnα_Mg-cl-H2O due to the heterogeneous nature of the solid.The results of this study suggest that paleotemperatures inferred from the δ¹⁸O values of high magnesian calcite (>10 mol% MgCO₃) may be significantly underestimated. Also, the results underscore the need for additional experiments to accurately characterize the effect of Mg coprecipitation on the isotope systematics of calcite from a chemically homogeneous precipitate or a heterogeneous material that is analyzed at the scale of chemical and isotopic zonation.     

Geochemistry of meteoric calcite cements in some Pleistocene limestones

In this study, the stable isotope and trace element geochemistries of meteoric cements in Pleistocene limestones from Enewetak Atoll (western Pacific Ocean), Cat Island (Bahamas), and Yucatan were characterized to help interpret similar cements in ancient rocks. Meteoric calcite cements have a narrow range of δ¹⁸O values and a broad range of δ¹³C values in each geographical province. These Pleistocene cements were precipitated from water with stable oxygen isotopic compositions similar to modern rainwater in each location. Enewetak calcite cements have a mean δ¹⁸O composition of ?6.5%₀ (PDB) and δ¹³C values ranging from ?9.6 to +0.4%0 (PDB). Sparry calcite cements from Cat Island have a mean δ¹⁸O composition of ?4.1%₀ and δ¹³C values ranging from ?6.3 to + 1.1%₀. Sparry cements from Yucatan have a mean δ¹⁸O composition of ?5.7%₀ and δ¹³C values of ?8.0 to ?2.7%₀. The mean δ¹⁸O values of these Pleistocene meteoric calcite cements vary by 2.4%₀ due to climatic variations not related directly to latitude. The δ¹³C compositions of meteoric cements are distinctly lower than those of the depositional sediments. Variations in δ¹³C are not simply a function of distance below an exposure surface. Meteoric phreatic cements often have δ¹³C compositions of less than —4.0%₀, which suggests that soil-derived CO₂ and organic material were washed into the water table penecontemporaneous with precipitation of phreatic cements. Concentrations of strontium and magnesium are quite variable within and between the three geographical provinces. Mean strontium concentrations for sparry calcite cements are, for Enewetak Atoll, 620 ppm (σ= 510 ppm); for Cat Island, 1200 ppm (σ= 980 ppm); and for Yucatan, 700 ppm (σ= 390 ppm). Equant cements, intraskeletal cements, and Bahamian cements have higher mean strontium concentrations than other cements. Equant and intraskeletal cements probably precipitated in more closed or stagnant aqueous environments. Bahamian depositional sediments had higher strontium concentrations which probably caused high strontium concentrations in their cements. Magnesium concentrations in Pleistocene meteoric cements are similar in samples from Enewetak Atoll (mean =1.00 mol% MgCO₃; σ= 0.60 mol% MgCO₃) and Cat Island (mean = 0.84 mol% MgCO₃; σ= 0.52mol% MgCO₃) but Yucatan samples have higher magnesium concentrations (mean = 2.20 mol% MgCO₃: σ= 0.84mol% MgCO₃). Higher magnesium concentrations in some Yucatan cements probably reflect precipitation in environments where sea water mixed with fresh water.     

Diffusion-controlled growth of wollastonite rims between quartz and calcite: comparison between nature and experiment

Growth rates of wollastonite reaction rims between quartz and calcite were experimentally determined at 0.1 and 1 GPa and temperatures from 850 to 1200 °C. Rim growth follows a parabolic rate law indicating that this reaction is diffusion‐controlled. From the rate constants, the D′δ‐values of the rate‐limiting species were derived, i.e. the product of grain boundary diffusion coefficient D′ and the effective grain boundary width, δ. In dry runs at 0.1 GPa, wollastonite grew exclusively on quartz surfaces. From volume considerations it is inferred that (D′_CaOδ)/(D′_SiO2δ)≥1.33, and that SiO₂ diffusion controls rim growth. D′_SiO2δ increases from about 10^?25 to 10^?23 m³ s^?1 as temperature increases from 850 to 1000 °C, yielding an apparent activation energy of 330±36 kJ mol^?1. In runs at 1 GPa, performed in a piston‐cylinder apparatus, there were always small amounts of water present. Here, wollastonite rims always overgrew calcite. Rims around calcite grains in quartz matrix are porous and their growth rates are controlled by a complex diffusion‐advection mechanism. Rim growth on matrix calcite around quartz grains is controlled by grain boundary diffusion, but it is not clear whether CaO or SiO₂ diffusion is rate‐limiting. D′δ increases from about 10^?21 to 10^?20 m³ s^?1 as temperature increases from 1100 to 1200 °C. D′_SiO2δ or D′_CaOδ in rims on calcite is c. 10 times larger than D′_SiO2δ in dry rims at the same temperature. Growth structures of the experimentally produced rims are very similar to contact‐metamorphic wollastonite rims between metachert bands and limestone in the Bufa del Diente aureole, Mexico, whereby noninfiltrated metacherts correspond to dry and brine‐infiltrated metacherts to water‐bearing experiments. However, the observed diffusivities were 4 to 5 orders of magnitude larger during contact‐metamorphism as compared to our experimental results.     

Identification and composition of secondary meniscus calcite in fossil coral and the effect on predicted sea surface temperature

This study uses electron backscatter diffraction (EBSD) and atomic force microscopy (AFM) to identify secondary calcite in coral skeletons. Secondary calcite appears to have nucleated on the original aragonite dissepiments, producing horizontal structures that mimic the morphology of the original coral aragonite, forming dissepiment-like meniscus structures. The Sr/Ca and δ¹⁸O of the pristine aragonite and secondary calcite were analysed by secondary ion mass spectrometry (SIMS). The effect of calcite inclusion on the mean geochemistry of the coral carbonate and subsequent sea surface temperature (SST) calculations were determined for both Sr/Ca and δ¹⁸O. Inclusion of as little as 1% secondary calcite within the primary coral aragonite elevates the Sr/Ca-derived SST by 1.2 °C and could markedly offset estimates of past tropical climate. Conversely, inclusion of 10% secondary calcite has little effect on the SST estimated from δ¹⁸O (+ 0.6 °C) indicating that this proxy is relatively robust to even large amounts of calcite. The different extents to which the two proxies would be influenced by inadvertent inclusion of such meniscus calcite demonstrate the importance of a multi-proxy approach.     

Ordovician low- to intermediate-Mg calcite marine cements from Sweden: marine alteration and implications for oxygen isotopes in Ordovician seawater

Petrography demonstrates the presence of three types of fibrous calcite cement in buildup deposits of the Kullsberg Limestone (middle Caradoc), central Sweden. Translucent fibrous calcite has intrinsic blue luminescence (CL) indicative of pure calcite. This cement has 2–5 mol% MgCO₃, low Mn and Fe (≤ 100 p.p.m.), and is considered to be slightly altered to unaltered, primary low- to intermediate-Mg calcite. Grey turbid fibrous calcite has variable but generally low MgCO₃ content (most analyses <2 mol%) and variable CL response, with Mn and Fe concentrations up to 1200 and 500 p.p.m., respectively. The heterogeneous characteristics of this variety of fibrous calcite are caused by diagenetic alteration of a translucent fibrous calcite precursor. Light-brown turbid fibrous calcite has low MgCO₃ (near 1 mol%) and variable Mn (up to 800 p.p.m.) and Fe (up to 500 p.p.m.) concentrations, with an abundance of bright luminescent patches, which formed during alteration caused by reducing diagenetic fluids. The δ¹³C and δ¹⁸O values of all fibrous calcite form a tight field (δ¹³C=1·7 to 3·1‰ PDB, δ¹⁸O= ? 2·6 to ? 4·1‰ PDB) compared with fibrous calcite isotope values from other units. Fibrous calcite δ¹⁸O values are larger than adjacent meteoric or burial cements, which have δ¹⁸O δ ? 8‰ PDB. Consequently, most diagenetic alteration of Kullsberg fibrous calcite is interpreted to have occurred in the marine diagenetic realm. First-generation equant and bladed calcite cements, which pre-date fibrous calcite, are interpreted as unaltered, low-Mg calcite marine cements based on δ¹³C and δ¹⁸O data (δ¹³C = 2·3 to 2·7‰ PDB, δ¹⁸O= ? 2·8 to ? 3·5‰ PDB). Unlike fibrous cement, which reflects global sea water chemistry, first-generation equant and bladed calcite are indicators of localized modification of seawater chemistry in restricted settings. Kullsberg abiotic marine cements have larger δ¹⁸O values than most Caradoc marine precipitates from equatorial Laurentia. Positive Kullsberg δ¹⁸O values are attributed to lower seawater temperatures and/or slightly elevated salinity on the Baltic platform relative to seawater from which other marine precipitates formed.     

Low-Mg calcite marine cement in Cretaceous turbidites: origin, spatial distribution and relationship to seawater chemistry

Lower Cretaceous (Hauterivian) bioclastic sandstone turbidites in the Scapa Member (North Sea Basin) were extensively cemented by low-Mg calcite spars, initially as rim cements and subsequently as concretions. Five petrographically distinct cement stages form a consistent paragenetic sequence across the Scapa Field. The dominant and pervasive second cement stage accounts for the majority of concretions, and is the focus of this study. Stable-isotope characterization of the cement is hampered by the presence of calcitic bioclasts and of later cements in sponge spicule moulds throughout the concretions. Nevertheless, trends from whole-rock data, augmented by cement separates from synlithification fractures, indicate an early calcite δ¹⁸O value of+0·5 to -1·5‰ PDB. As such, the calcite probably precipitated from marine pore fluids shortly after turbidite deposition. Carbon isotopes (δ¹³C=0 to -2‰ PDB) and petrographic data indicate that calcite formed as a consequence of bioclastic aragonite dissolution. Textural integrity of calcitic nannoplankton in the sandstones demonstrates that pore fluids remained at or above calcite saturation, as expected for a mineral-controlled transformation. Electron probe microanalyses demonstrate that early calcite cement contains <2 mol% MgCO₃, despite its marine parentage. Production of this cement is ascribed to a combination of an elevated aragonite saturation depth and a lowered marine Mg²⁺/Ca²⁺ ratio in early Cretaceous ‘calcite seas’, relative to modern oceans. Scapa cement compositions concur with published models in suggesting that Hauterivian ocean water had a Mg²⁺/Ca²⁺ ratio of ≤1. This is also supported by consideration of the spatial distribution of early calcite cement in terms of concretion growth kinetics. In contrast to the dominant early cement, late-stage ferroan, ¹⁸O-depleted calcites were sourced outwith the Scapa Member and precipitated after 1–2 km of burial. Our results emphasize that bioclast dissolution and low-Mg calcite cementation in sandstone reservoirs should not automatically be regarded as evidence for uplift and meteoric diagenesis.     

Cold seeps in Monterey Bay, California: Geochemistry of pore waters and relationship to benthic foraminiferal calcite

An extensive geochemical and biogeochemical examination of CH₄ seeps in the Clam Flats area of Monterey Bay provides insight into the character of relationships between seep geochemistry and benthic foraminiferal geochemistry. The area is characterized by sulfide-rich fluids. Sulfide increases are associated with large increases in alkalinity, as well as small decreases in dissolved Ca and Mg. In addition, only small increases in NH₄ are observed, but values of δ¹³C of dissolved inorganic C are as low as −60‰ at shallow depths (<3 cm). These observations indicate that all these processes are related to the bacterial oxidation of CH₄, which is transported upward by slow seepage of pore fluids. The geochemistry of the pore fluids should be relevant to the geochemistry of the carbonate tests of living and dead foraminifera. However, a profound disequilibrium of approximately an order of magnitude occurs between the δ¹³C values of stained (cytoplasm-containing) foraminiferal carbonate and the C isotope values of ambient pore water dissolved inorganic C. Reasons are unclear for this isotopic disequilibrium, but have important implications for interpretations of foraminiferal carbonate as a paleoenvironmental proxy. Much fine scale work is needed to fully understand the relationships between the biogeochemistry of benthic foraminifera and the geochemistry of the pore waters where they live.     

Biogenic processes in crystalline bedrock fractures indicated by carbon isotope signatures of secondary calcite

Variation in ¹³C/¹²C-isotope ratios of fracture filling calcite was analyzed in situ to investigate carbon sources and cycling in fractured bedrock. The study was conducted by separating sections of fracture fillings, and analyzing the ¹³C/¹²C-ratios with secondary ion mass spectrometry (SIMS). Specifically, the study was aimed at fillings where previously published sulfur isotope data indicated the occurrence of bacterial sulfate reduction. The results showed that the δ¹³C values of calcite were highly variable, ranging from −53.8‰ to +31.6‰ (VPDB). The analysis also showed high variations within single fillings of up to 39‰. The analyzed calcite fillings were mostly associated with two calcite groups, of which Group 3 represents possible Paleozoic fluid circulation, based on comparison with similar dated coatings within the Baltic Shield and the succeeding Group 1–2 fillings represent late-stage, low temperature mineralization and are possibly late Paleozoic to Quaternary in age. Both generations were associated with pyrite with δ³⁴S values indicative of bacterial sulfate reduction. The δ¹³C values of calcite, however, were indicative of geochemical environments which were distinct for these generations. The δ¹³C values of Group 3 calcite varied from −22.1‰ to +11‰, with a distinct peak at −16‰ to −12‰. Furthermore, there were no observable depth dependent trends in the δ¹³C values of Group 3 calcite. The δ¹³C values of Group 3 calcite were indicative of organic matter degradation and methanogenesis. In contrast to the Group 3 fillings, the δ¹³C values of Group 1–2 calcite were highly variable, ranging from −53.8‰ to +31.6‰ and they showed systematic variation with depth. The near surface environment of <30 m (bsl) was characterized by δ¹³C values indicative of degradation of surface derived organic matter, with δ¹³C values ranging from −30.3‰ to −5.5‰. The intermediate depth of 34–54 m showed evidence of localized methanotrophic activity seen as anomalously ¹³C depleted calcite, having δ¹³C values as low as −53.8‰. At depths of ∼60–400 m, positive δ¹³C values of up to +31.6‰ in late-stage calcite of Group 1–2 indicated methanogenesis. In comparison, high CH₄ concentrations in present day groundwaters are found at depths of >300 m. One sample at a depth of 111 m showed a transition from methanogenetic conditions (calcite bearing methanogenetic signature) to sulfate reducing (precipitation of pyrite on calcite surface), however, the timing of this transition is so far unclear. The results from this study gives indications of the complex nature of sulfur and carbon cycling in fractured crystalline environments and highlights the usefulness of in situ stable isotope analysis.     

A study of oxygen isotopic fractionation during bio-induced calcite precipitation in eutrophic Baldeggersee,Switzerland

In order to better understand environmental factors controlling oxygen isotope shifts in autochthonous lacustrine carbonate sequences, we undertook an extensive one-year study (March, 1995 to February, 1996) of water-column chemistry and daily sediment trap material from a small lake in Central Switzerland. Comparisons between calculated equilibrium isotope values, using the fractionation equation of Friedman and O’Neil, (1977) and measured oxygen isotope ratios of calcite in the sediment-traps reveal that oxygen isotopic values of autochthonous calcite (δ¹⁸O) are in isotopic equilibrium with ambient water during most of the spring and summer, when the majority of the calcite precipitates. In contrast, small amounts of calcite precipitated in early-spring and again in late-autumn are isotopically depleted in ¹⁸O relative to the calculated equilibrium values, by as much as 0.8‰. This seasonally occurring apparent isotopic nonequilibrium is associated with times of high phosphorous concentrations, elevated pH (∼8.6) and increased [CO₃²⁻] (∼50 μmol/l) in the surface waters. The resulting weighted average δ¹⁸O value for the studied period is −9.6‰, compared with a calculated equilibrium δ¹⁸O value of −9.4‰. These data convincingly demonstrate that δ¹⁸O of calcite are, for the most part, a very reliable proxy for temperature and δ¹⁸O of the water.     

The impact of salinity on the Mg/Ca and Sr/Ca ratio in the benthic foraminifera Ammonia tepida: Results from culture experiments

Over the last decade, sea surface temperature (SST) reconstructed from the Mg/Ca ratio of foraminiferal calcite has increasingly been used, in combination with the δ¹⁸O signal measured on the same material, to calculate the δ¹⁸O_w, a proxy for sea surface salinity (SSS). A number of studies, however, have shown that the Mg/Ca ratio is also sensitive to other parameters, such as pH or , and salinity. To increase the reliability of foraminiferal Mg/Ca ratios as temperature proxies, these effects should be quantified in isolation. Individuals of the benthic foraminifera Ammonia tepida were cultured at three different salinities (20, 33 and 40 psu) and two temperatures (10-15 °C). The Mg/Ca and Sr/Ca ratios of newly formed calcite were analyzed by Laser Ablation ICP-MS and demonstrate that the Mg concentration in A. tepida is overall relatively low (mean value per experimental condition between 0.5 and 1.3 mmol/mol) when compared to other foraminiferal species, Sr being similar to other foraminiferal species. The Mg and Sr incorporation are both enhanced with increasing temperatures. However, the temperature dependency for Sr disappears when the distribution factor D_Sr is plotted as a function of calcite saturation state (Ω). This suggests that a kinetic process related to Ω is responsible for the observed dependency of Sr incorporation on sea water temperature. The inferred relative increase in D_Mg per unit salinity is 2.8% at 10 °C and 3.3% at 15 °C, for the salinity interval 20-40 psu. This implies that a salinity increase of 2 psu results in enhanced Mg incorporation equivalent to 1 °C temperature increase. The D_Sr increase per unit salinity is 0.8% at 10 °C and 1.3% at 15 °C, for the salinity interval 20-40 psu.     

The biogenic origin of needle fibre calcite

Needle fibre calcite is one of the most ubiquitous habits of calcite in vadose environments (caves deposits, soil pores, etc.). Its origin, either through inorganic, indirect or direct biological processes, has long been debated. In this study, investigations at 11 sites in Europe, Africa and Central America support arguments for its biogenic origin. The wide range of needle morphologies is the result of a gradual evolution of the simplest type, a rod. This rod is the elementary brick which, by aggregation and welding, builds more complex needles. The absence of cross‐welded needles implies that they are welded in a mould, or under a longitudinal and unidirectional constraint, before being released inside the soil pores. The difference between the lengthening of the needles and the c axis can be explained by the existence of needles observed under a scanning electron microscope in organic sleeves, which can act as a mould during rod growth. Complex morphologies with epitaxial outgrowths on straight rods cannot have grown entirely inside organic microtubes; they must result from soil diagenesis after the release of straight rods in a soil‐free medium. Whisker crystals are interpreted as the result of growth and coalescence of euhedral crystals on a rod. Rhomb chains are considered to be the consequence of successive epitaxial growth steps on a needle during variations in growth conditions. Isotopic signatures for needle fibre calcite vary from ?16·63‰ to +1·10‰ and from ?8·63‰ to ?2·25‰ for δ¹³C and δ¹⁸O, respectively. The absence of high δ¹⁸O values for needle fibre calcite precludes a purely physicochemical origin (evaporative) for this particular habit of calcite. As epitaxial growth cannot precipitate in the same conditions as initial needles, needle fibre calcite stable isotopic signatures should be used with caution as a proxy for palaeoenvironmental reconstructions. In addition, it is suggested that the term needle fibre calcite should be kept for the original biogenic form. The other habit should be referred to as epitaxial forms of needle fibre calcite.     

Diagenetic alteration of early marine cements of Upper Silurian stromatactis

Stromatactis is a spar network whose elements in cross section have flat to undulose lower surfaces and digitate upper surfaces. The network is composed principally of isopachous crusts of centripetal cement and commonly occurs embedded in finely crystalline limestone. It is the cement filling of interconnected cavities. Stromatactis of Upper Silurian red stromatactis limestone from Gaspé Peninsula, Québec Appalachians, exhibits two types of cements: (1) an isopachous cement that lined the walls of the conduits and is interpreted as early marine; and (2) a later blocky cement that occupies the centres of cavities. The first cement is composed exclusively of non-ferroan calcite, whereas the second cement is mixed non-ferroan and ferroan calcite. The early isopachous cement is white on polished slabs and has a turbid aspect under transmitted light. In a few samples, the relative homogeneity of this early cement is broken by the presence of distinctive grey clear calcite. Under cathodoluminscence, the grey clear calcite is non-luminescent and exhibits well defined bladed crystal shapes, whereas the white turbid cement has a dull orange luminescence and indistinct crystal shapes. The relationships between the two cements indicate that the dull luminescent cement is a secondary form of the non-luminescent cement, and it is concluded that the dull cement is the product of alteration of the non-luminescent cement by burial or meteoric fluids. The later blocky cement has the same dull luminescence as the white turbid cement and is thought to have been precipitated from the same fluids as those responsible for the alteration of the early marine cements. Oxygen isotopic values of the dull cement of the early isopachous crusts (mean δ¹⁸O= -6.8%_o are intermediate between those of the non-luminescent early marine cement (mean δ¹⁸O= -5.3%_o) and the dull luminescent blocky cement (mean δ¹⁸O= -11.8%_o), while carbon isotopic values do not differ significantly (δ¹³C=+2.9, +2.4 and +2.6%_o, respectively). The alteration also has affected the distribution of some trace elements, particularly Mg. Both unaltered and altered cements contain less than 1% microdolomite inclusions, but the Mg content of the background calcite of unaltered cement is three times that of altered cement (14171 vs. 5502 ppm). Precursor early marine cement is thought to have been low-Mg calcite. The mean δ¹⁸O value (− 5.3%_o) of unaltered early marine cement is higher than values for the oxygen isotopic signature of Silurian oceans provided by brachiopod shells.     

Diagenesis of an Upper Triassic reef complex, Wilde Kirche, Northern Calcareous Alps, Austria

The Wilde Kirche reef complex (Early-Late Rhaetian) grew as an isolated carbonate structure within the shallow Kössen Basin. At the Triassic/Jurassic boundary a single brief (c. 10–50 ka) period of subaerial exposure occurred. The preserved karst profile (70 m thick) displays a vadose zone, enhanced dissolution at a possible palaeo-watertable (5–15 m below the exposure surface), and a freshwater phreatic zone. Karst porosity was predominantly biomouldic. Primary cavities and biomoulds were enlarged and interconnected in the freshwater phreatic zone; cavity networks developed preferentially in patch reef facies. Resubmergence of the reef complex allowed minor modification of the palaeokarst surface by sea floor dissolution and Fe-Mn crust deposition on a sediment-starved passive margin. Fibrous calcite (FC). radiaxial fibrous calcite (RFC) and fascicular optic calcite (FOC) cements preserved as low Mg calcite (LMC) are abundant in primary and karst dissolution cavities. FC cement is restricted to primary porosity, particularly as a synsedimentary cement at the windward reef margin. FC, RFC and FOC contain microdolomite inclusions and show patchy non-/bright cathodoluminescence. δ¹⁸O values of non-luminescent portions (interpreted as near original) are − 1.16 to − 1.82%0 (close to the inferred δ¹⁸O of calcite precipitated from Late Triassic sea water). δ¹³C values are constant (+3 to + 2.2%0). These observations suggest FC, RFC and FOC were originally marine high Mg calcite (HMC) precipitates, and that the bulk of porosity occlusion occurred not in the karst environment but in the marine environment during and after marine transgression. The HMC to LMC transition may have occurred in contact with meteoric water only in the case of FC cement. The most altered (brightly luminescent) portions of RFC/FOC cements yield δ¹⁸O=−2.44 to − 5.8%0, suggesting HMC to LMC alteration at up to 34°C. in the shallow burial environment at depths of 180–250 m. Abundant equant cements with δ¹⁸O =−4·1 to −7.1%0 show crisp, uniform or zoned dull luminescence. They are interpreted as unaltered cements precipitated at 33–36°C at 200–290 m burial depth, from marine-derived fluids under a slightly enhanced geothermal gradient. Fluids carrying the equant cements may have induced the HMC to LMC transition in the fibrous cements.     

Pressure effect on magnesian calcite coating calcite and synthetic magnesian calcite seeds added to seawater in a closed system

When pure crystalline calcite seeds are added to supersaturated seawater, precipitation results in a coating which with time equilibrates at atmospheric pressure with seawater and corresponds to a calcite containing probably only 2 or 3% of MgCO₃ (mole fraction).If synthetic crystalline magnesian calcite is added, the surface layer equilibrates not only with respect to seawater but also in relation with the crystalline sites initiating precipitation. Adding Mg_0.03Ca_0.97CO₃ results in a coating with a solubility close to that of calcite. This confirms that the surface coating on pure calcite seeds contains about 2 or 3% MgCO₃ (K'_sp = 10?6.30).The surface layer precipitated on a synthetic Mg_0.08Ca_0.92CO₃ equilibrates finally with a carbonate more soluble than calcite (K'_sp = 10?5.94) corresponding to the seeds composition.Experiments at 1000 kg cm t-2 imply that when magnesian calcites are precipitated at the surface of calcite or magnesian calcite seeds, the precipitate must be hydrated, otherwise pressure accelerated recrystallization or rearrangement with loss of Mg would thermodynamically be impossible.By changing the pressure of a seawater sample originally saturated with a solid carbonate phase, changes in pH result from the effect of pressure on the dissociation constants of carbonic acid and boric acid causing either undersaturation or supersaturation with respect to the solid. By changing pressure we can show whether precipitation, dissolution and recrystallization are reversible processes if pH is taken as criteria of reversibility.