共查询到20条相似文献,搜索用时 352 毫秒
1.
A new ray-tracing method called linear traveltime interpolation (LTI) is proposed. This method computes traveltimes and raypaths in a 2D velocity structure more rapidly and accurately than other conventional methods. The LTI method is formulated for a 2D cell model, and calculations of traveltimes and raypaths are carried out only on cell boundaries. Therefore a raypath is considered to be always straight in a cell with uniform velocity. This approach is suitable to tomography analysis. The algorithm of LTI consists of two separate steps: step 1 calculates traveltimes on all cell boundaries; step 2 traces raypaths for all pairs of receivers and the shot. A traveltime at an arbitrary point on a cell boundary is assumed to be linearly interpolated between traveltimes at the adjacent discrete points at which we calculate traveltimes. Fermat's principle is used as the criterion for choosing the correct traveltimes and raypaths from several candidates routinely. The LTI method has been compared numerically with the shooting method and the finite-difference method (FDM) of the eikonal equation. The results show that the LTI method has great advantages of high speed and high accuracy in the calculation of both traveltimes and raypaths. The LTI method can be regarded as an advanced version of the conventional FDM of the eikonal equation because the formulae of FDM are independently derived from LTI. In the process of derivation, it is shown theoretically that LTI is more accurate than FDM. Moreover in the LTI method, we can avoid the numerical instability that occurs in Vidale's method where the velocity changes abruptly. 相似文献
2.
We describe two practicable approaches for an efficient computation of seismic traveltimes and amplitudes. The first approach is based on a combined finite‐difference solution of the eikonal equation and the transport equation (the ‘FD approach’). These equations are formulated as hyperbolic conservation laws; the eikonal equation is solved numerically by a third‐order ENO–Godunov scheme for the traveltimes whereas the transport equation is solved by a first‐order upwind scheme for the amplitudes. The schemes are implemented in 2D using polar coordinates. The results are first‐arrival traveltimes and the corresponding amplitudes. The second approach uses ray tracing (the ‘ray approach’) and employs a wavefront construction (WFC) method to calculate the traveltimes. Geometrical spreading factors are then computed from these traveltimes via the ray propagator without the need for dynamic ray tracing or numerical differentiation. With this procedure it is also possible to obtain multivalued traveltimes and the corresponding geometrical spreading factors. Both methods are compared using the Marmousi model. The results show that the FD eikonal traveltimes are highly accurate and perfectly match the WFC traveltimes. The resulting FD amplitudes are smooth and consistent with the geometrical spreading factors obtained from the ray approach. Hence, both approaches can be used for fast and reliable computation of seismic first‐arrival traveltimes and amplitudes in complex models. In addition, the capabilities of the ray approach for computing traveltimes and spreading factors of later arrivals are demonstrated with the help of the Shell benchmark model. 相似文献
3.
地震射线追踪方法技术在地震学领域有着较为广泛的应用,然而大多数算法建立在直角坐标系或球坐标系下,实际地球并非完美的球体,而是两极略扁的椭球体,因此,球坐标系下计算结果与真实情况存在一定误差.传统的做法一般是在球坐标系下进行计算,而后进行椭球校正.本文提出了一种直接在椭球体模型中采用分区多步最短路径算法进行多震相地震射线追踪的方法技术,实现了椭球坐标系下多震相地震波射线路径追踪和走时计算.与解析解的对比表明:该算法具有较高的计算精度,适用于任意形状的椭球体,且不需要进行额外的走时校正.数值模拟结果表明,计算所得P波和PcP反射波的走时与AK135走时表的误差小于0.1 s.当震中距较大时,使用球对称模型和椭球体模型计算所得的走时差异显著,说明采用椭球坐标系的必要性. 相似文献
4.
Transverse isotropy with a tilted axis of symmetry (TTI) causes image distortion if isotropic models are assumed during data processing. A simple anisotropic migration approach needs long computational times and is sensitive to the signal-to-noise ratio. This paper presents an efficient, general approach to common-depth-point (CDP) mapping to image the subsurface in TTI media from qP-wave seismic data by adding anisotropic and dip parameters to the velocity model. The method consists of three steps: (i) calculating traveltimes and positions of the CDP points; (ii) determining CDP trajectories; (iii) CDP imaging. A crucial step is the rapid computation of traveltimes and raypaths in the TTI media, which is achieved by the Fermat method, specially adapted for anisotropic layered media. The algorithm can image the subsurface of a given model quickly and accurately, and is suitable for application to a bending reflector. The effectiveness of the method is demonstrated by comparing the raypaths, the traveltimes and the results of CDP mapping, when assuming isotropic media, transversely isotropic media with a vertical axis of symmetry (TIV), and TTI media. 相似文献
5.
The possibilities for reconstructing seismic velocity distributions containing low-velocity anomalies by iterative tomographic methods are examined studying numerical and analogue 2D model data. The geometrical conditions of the model series were designed to generalize the geometrical characteristics of a typical cross-hole tomographic field case. Models with high (30%) and low (8%) velocity contrasts were realized. Traveltimes of 2D ultrasonic P-waves, determined for a dense net of raypaths across each model, form the analogue data set. The numerical data consists of traveltimes calculated along straight raypaths. Additionally, a set of curved-ray traveltimes was calculated for a smoothed version of the high-contrast model. The Simultaneous Iterative Reconstruction Technique (SIRT) was chosen from the various tomographic inversion methods. The abilities of this standard procedure are studied using the low-contrast model data. The investigations concentrate on the resolving power concerning geometry and velocity, and on the effects caused by erroneous data due to noise or a finite time precision. The grid spacing and the source and receiver patterns are modified. Smoothing and slowness constraints were tested. The inversion of high-contrast analogue model data shows that curved raypaths have to be considered. Hence, a ray-tracing algorithm using velocity gradients was developed, based on the grid structure of the tomographic inversion. This algorithm is included in the SIRT-process and the improvements concerning anomaly localization, resolution and velocity reconstruction are demonstrated. Since curved-ray tomography is time-consuming compared with straight-ray SIRT, it is necessary to consider the effects of grid spacing, ray density, slowness constraints and the 相似文献
6.
综述了用网络最短路径算法求解地震射线追踪问题的原理、方法技术以及存在问题和改进措施。特别介绍了作者在最短路径算法基础上,提出的动态网络最短路径地震射线追踪方法。该方法先采集从炮点到整个模型所有节点上的初至旅行时,其中,在一个单元内,对相邻每对已计算出最小旅行时的节点进行线性插值,并利用Fermat原理计算未知节点的最小旅行时;然后,利用同样的方法,从接收点开始,反向追踪炮点到接收点的射线路径、该方法能适于各种复杂的非均匀介质,极大地提高了射线追踪的精度。 相似文献
7.
Based on observations from a dense broadband seismic array located along the northeastern (NE) margin of the Tibetan Plateau in southeastern Gansu Province,we use receiver functions (RFs) to pick the arrival times of P-to-S converted waves and bin the traces in different grids according to the piercing points of the 410 and 660 km discontinuities in the upper mantle.The depths of the two discontinuities are estimated by the ray tracing method with the IASP91 velocity model and a 3-D tomography model.The results indicate the following:(1) The arrival times of the P410s and P660s converted phases are delayed by approximately 1 s than those predicted by the IASP91 model.The mantle transition zone (MTZ) is thicker than that in the global model.(2) The synchronous lags in the P410s and P660s arrival times are consistent with low-velocity anomalies in the upper mantle,which are believed to result mainly from the eastward migration of materials beneath the NE margin of the Tibetan Plateau.(3) Combined with previous tomography results,the depression of the'660'discontinuity and the thickened MTZ are somewhat consistent with the big mantle wedge (BMW) model.However,due to data limitations,more studies are required to explore the BMW in the future. 相似文献
8.
中国大陆中西部普遍具有强烈的地形起伏,起伏地形会对地震资料的处理分析产生严重干扰.精细处理起伏地形成为高精度地震成像的必然要求.传统方法通过填充低速介质将不规则模型扩展为规则模型来处理起伏地形.近年来,借助坐标变换将物理空间不规则模型转换为计算空间规则模型的地形平化方法,为解决起伏地形问题提供了新思路.本文基于经典的模型扩展和新发展的地形平化方法分别处理起伏地形,从走时正演、射线追踪和反演成像三个方面,全面细致地评判了两种地形处理方法在起伏地形层析成像中的适用性和有效性.结果表明,模型扩展中阶梯状近似和填充介质速度参与计算,会造成起伏地形走时计算精度损失,出现虚假射线路径和错误出射角,导致反演分辨率降低,成像结果模糊甚至失真;地形平化中采用贴体网格参数化,能够保证离散模型完全匹配起伏地形,并且保持起伏地形在物理空间和计算空间中均为自由表面.在此基础上发展的层析成像技术具有高度的保真性,有效地处理了地形起伏效应,为起伏地形区域精细速度成像提供了有力的技术保障. 相似文献
9.
针对复杂介质的地震反射走时层析成像存在数据拾取困难问题,本文提出了一种新的地震反射层析成像速度模型建立方法,该方法用速度和地震射线走时描述模型,用地震反射波走时、地震波在源点和接收点处的传播方向信息反演模型.为提高反演的稳定性和计算效率,引入了Hamilton函数描述射线,在相空间计算反演所需的射线路径和目标函数对模型参数的导数,对理论模型和实际地震资料进行了试算,试算表明该方法对复杂介质具有较强的适应能力. 相似文献
10.
长期地震观测发现,北京地震台实际地震记录的震相走时与全球地震走时表IASP91之间存在走时偏差。结合北京地震台及周边地下40km精细速度结构的研究成果和AK135模型,构建其地震走时表的计算模型。通过对该地震台2003--2008年NCDSN地震观测实际走时比对,对模型结构进行修正,最终建立北京地震台地震走时表。 相似文献
11.
按照井间地震的观测系统,用改进的突变点加插值射线追踪方法,追踪每炮每道的射线路径,计算几种主要类型的波沿射线路径的波至时间和射线振幅,制作井间地震多炮多道水平分量和垂直分量的合成记录.并将合成记录选排为井间共炮点道集、共接收点道集、共偏移距道集和共中心深度点道集,系统地分析了不同道集内几种主要类型的地震波的传播特征.对野外观测的实际井间地震记录进行了模拟,从复杂的井间地震记录中,识别出井间地震实际观测到的不同类型的波场,为随后的井间地震资料处理和应用提供了依据. 相似文献
12.
A new algorithm for tomographic inversion of traveltimes of reflected and refracted seismic waves is developed. The inversion gives interface configurations and velocity distributions in layers. The important features of the algorithm are: (a) the inclusion of shot time delays in the list of unknown parameters; (b) the regularization is applied in such a way that the most probable model is characterized by the similarity of neighbouring interfaces. As the problem under consideration is non-linear, several iterations are necessary in order to obtain the final model. In the case of a very inexact initial model, a 'layer-by-layer' inversion strategy is recommended as a first inversion step. The inversion program is supplied with a user interface, thanks to which one can: (a) pick interactively and identify seismic traveltimes; (b) build and edit depth/velocity models; and (c) display calculated traveltime curves and compare them with picked traveltimes as well as with the original seismic sections. The efficiency of the inversion software developed is illustrated by a numerical example and a field example in which shallow seismic data are considered. Application to wide-aperture reflection/refraction profiling (WARRP) data is also possible. 相似文献
13.
海洋地球物理勘探中常使用多道地震数据建立浅部地层模型,结合海底地震仪广角地震数据进行射线追踪和走时反演求取地层速度特征.受采集环境和成本限制,部分海底地震仪测线缺少同步采集的多道地震数据,建立的初始模型其浅层结构有较大不确定性,可能会对正演模拟结果造成严重影响.本研究针对海底地震仪广角地震走时模拟中浅部结构的不确定性因素,使用RayInvr软件构建了理论模型和走时数据体,分析讨论了初始模型沉积层厚度与速度变化对正演模拟结果的影响.之后进行实测数据处理,在MCS2019-3测线数据的约束下建立初始模型,对OBS2011-1测线震相重新进行了走时拟合,将得到的模型结果与先前结果进行对比,得到以下结论:沉积层厚度及速度不确定性对走时模拟结果的浅部结构影响较大,深部结构影响较小;使用错误的速度与基底深度组合来拟合沉积层反射震相PsP,会使台站下方的地壳和地幔折射震相Pg和Pn,以及莫霍面反射震相PmP都出现走时小起伏,走时提前对应沉积层速度与厚度偏大,走时延后对应沉积层速度与厚度偏小;PsP震相缺失时,不同的速度-深度组合都可以很好地拟合震相,但会增加结果的不确定性. 相似文献
14.
最短路径射线追踪算法,用预先设置的网络节点的连线表示地震波传播路径,当网络节点稀疏时,获得的射线路径呈之字形,计算的走时比实际走时系统偏大. 本文在波前扩展和反向确定射线路径的过程中,在每个矩形单元内,通过对某边界上的已知走时节点的走时进行线性插值,并利用Fermat原理即时求出从该边界到达其他边界节点的最小走时及其子震源位置和射线路径,发展了相应的动态网络算法. 从而克服了最短路径射线追踪算法的缺陷,大大提高了最小走时和射线路径的计算精度. 相似文献
15.
Giant earthquakes generate rich signals that can be used to explore the characteristics of the hierarchical structure of the Earth’s interior associated with the eigenfrequencies of the Earth.We employ the spectral element method,incorporated with large-scale parallel computing technology,to investigate the characteristics of global seismic wave propagation excited by the2011 Mw9.0 Tohoku earthquake.The transversely isotropic PREM model is employed as a prototype of our numerical global Earth model.Topographic data and the effect of the oceans are taken into consideration.Wave propagation processes are simulated by solving three-dimensional elastic wave governing equations with the seismic moment tensor obtained from the Global Centroid Moment Tensor Catalog.Three-dimensional visualization of our computing results displays the nature of the global seismic wave propagation.Comparative analysis of our calculations with observations obtained from the Incorporated Research Institutions for Seismology demonstrates the reliability and feasibility of our numerical results.We compare synthetic seismograms with incorporated and unincorporated ocean models.First results show that the oceans have obvious effects on the characteristics of seismic wave propagation.The peak displacement and peak velocity of P waves become relatively small under the effect of the ocean.However,the effect of the ocean on S-waves is complex.The displacement and velocity of S waves decrease rapidly over time using an unincorporated ocean model.Therefore,the effects of the ocean should be incorporated when undertaking quantitative earthquake hazard assessments on coastal areas.In addition,we undertake comparative analysis on the characteristics of the Earth’s oscillation excited by the 2004 Sumatra-Andaman,2008 Wenchuan,and 2011Tohoku earthquakes that incorporate the effect of the Earth’s gravitational potential.A comparison of the amplitude spectra of the numerical records indicates that energy released by the three big earthquakes is different.Our comparative analysis realizes that the computing results can accurately reproduce some eigenfrequencies of the Earth,such as toroidal modes 0T2 to 0T13and spheroidal modes 0S7 to 0S31.These results demonstrate that numerical simulations can be successfully used to investigate the Earth’s oscillations.We propose that numerical simulations can be used as one of the major tools to further reveal how the Earth’s lateral heterogeneities affect the Earth’s oscillations. 相似文献
16.
结合地震岩石物理技术,研究了叠前频变AVO反演在四川盆地龙马溪组页岩储层含气性识别中的应用.首先,应用Backus平均理论将测井数据粗化为地震尺度储层模型,应用传播矩阵理论进行高精度地震正演及井震标定,分析页岩气储层地震响应特征.其次,基于岩心观测结果,应用Chapman多尺度裂缝理论设计页岩气储层理论模型,研究储层衰减、频散以及对应的地震反射特征.应用该理论模型测试频变AVO反演方法,计算结果表明:对于研究区地层结构和地震数据,区分流体类型的优势频率不是地震子波的主频,还受层间调谐干涉等储层结构因素控制,也进一步说明理论模型测试和标定的重要性.最后,将频变AVO反演技术应用到四川盆地龙马溪组页岩地层,计算得到的频散属性为页岩气储层含气性识别提供依据. 相似文献
17.
A first-order Eikonal solver is applied to modelling and inversion in refraction seismics. The method calculates the traveltime of the fastest wave at any point of a regular grid, including head waves as used in refraction. The efficiency, robustness and flexibility of the method give a very powerful modelling tool to find both traveltimes and raypaths. Comparisons with finite-difference data show the validity of the results. Any arbitrarily complex model can be studied, including the exact topography of the surface, thus avoiding static corrections. Later arrivals are also obtained by applying high-slowness masks over the high-velocity zones. Such an efficient modelling tool may be used interactively to invert for the model, but a better method is to apply the refractor-imaging principle of Hagedoorn to obtain the refractors from the picked traveltime curves. The application of this principle has already been tried successfully by previous authors, but they used a less well-adapted Eikonal solver. Some of their traveltimes were not correct in the presence of strong velocity variations, and the refractor-imaging principle was restricted to receiver lines along a plane surface. With the first-order Eikonal solver chosen, any topography of the receiving surface can be considered and there is no restriction on the velocity contrast. Based on synthetic examples, the Hagedoorn principle appears to be robust even in the case of first arrivals associated with waves diving under the refractor. The velocities below the refractor can also be easily estimated, parallel to the imaging process. In this way, the model can be built up successively layer by layer, the refractor-imaging and velocity-mapping processes being performed for each identified refractor at a time. The inverted model could then be used in tomographic inversions because the calculated traveltimes are very close to the observed traveltimes and the raypaths are available. 相似文献
18.
选取江苏测震台网震中距2°以内18个地震台站记录清晰的波形资料,使用单纯形、LocSAT、HypoSAT地震定位方法,分别采用华南速度模型、郯庐断裂带中南段速度模型以及IASP91全球速度模型,重新测定江苏大丰海域M S5.0地震震源深度,对获取的深度值进行对比分析。结果表明:3种地震定位方法测定的震源深度结果接近,约为11 ± 2 km;HypoSAT定位方法计算结果较为稳定,IASP91、郯庐断裂带中南段模型均适用于该区域震源深度计算。 相似文献
19.
All recent available data sets containing traveltimes of Pg and Sg phases for the Moravo-Silesian region were collected. These
data come from several experiments designed mostly in 2D (in-line) configurations. Simultaneous processing of all data is
possible only considering the true 3D measurement geometry. The goal of this work is to establish the representative 3D seismic
model by means of seismic tomography. The resulting minimum-structure model is presented in a simple and easy to use form
on the Internet. The amount of processed data is relatively low but repeating the computations with new experimental data
included would be very easy. Important material related to this paper is placed on web pages. 相似文献
20.
利用矢量射线追踪正演模拟技术 ,计算地震波传播的路径及走时 ,进而利用射线走时及路径的内插 ,发展了弯曲射线迭代反演技术 .该方法可用来重建井间地层的速度图像 .基于所发展的方法 ,我们对两种较为复杂的典型地质模型进行了井间速度重建 .结果表明该方法是一项快速、高精度的跨孔数据速度重建技术 相似文献
|