Fe-Ti deposits in Rogaland anorthosites (South Norway): geochemical characteristics and problems of interpretation

The Rogaland anorthosite province (S. Norway) contains numerous Fe-Ti oxide deposits, including the second most important ilmenite deposit in the world, the Tellnes deposit. The largest deposits are located in the Åna-Sira anorthosite massif. Others occur in the Håland-Helleren anorthosite massif, particularly along the deformed contact with the Egersund-Ogna massif, where they were previously considered formed by metasomatic processes. All deposits are now regarded as magmatic. The structure, mineralogy and geochemistry of 11 selected Fe-Ti deposits (Tellnes, Storgangen, Blåfjell, Laksedal, Kydlandsvatn, Kagnuden, Rødemyr, Hestnes, Eigerøy, Svånes, and Jerneld) are discussed in light of recent models proposed for the origin of Rogaland anorthosites and related rocks. Massif-type anorthosites result from the diapiric uprise of a plagioclase crystal mush which crystallized along a large P–T interval. Except for Tellnes, which is related to a post-deformation dyke, the Fe-Ti deposits in anorthosite massifs have been deformed by this movement during and after their crystallization. The differentiation process of the jotunitic parental magma has built up cumulates in the Bjerkreim-Sokndal layered intrusion and liquids in the Tellnes dyke and other jotunitic intrusions. Ilmenite is a liquidus mineral immediately after plagioclase in the sequence of crystallization of these jotunites, its interstitial character in the rocks resulting from subsolidus recrystallization. Ilmenite can thus accumulate early in the evolution of jotunitic magmas. This feature, together with high contents in Cr, V, Mg and Ni, links the Jerneld, Blåfjell and Svånes deposits (type?1) to the early evolution of a jotunitic magma. In the Bjerkreim-Sokndal intrusion, magnetite can appear with ilmenite at the very beginning of the sequence of crystallization, but normally crystallizes after orthopyroxene and before clinopyroxene and apatite. The early appearance of magnetite is a characteristic feature of type 2 deposits (Tellnes, Storgangen, Kydlandsvatn, Rødemyr I) and suggests conditions similar to the early magnetite cumulates in the Bjerkreim-Sokndal intrusion. Evidence of layering further favours gravity-controlled sorting processes to concentrate the oxides. Large-scale subsolidus segregation of the oxides due to high-temperature deformation can further concentrate these minerals in silicate-absent meter-sized masses. Type 3 deposits (Rødemyr II, Kagnuden, Hestnes and Eigerøy) could be derived from the more evolved stages of differentiation, as indicated by high REE in apatite, high Ti and Zn in magnetite and relatively low Cr, V, Mg, Ni contents in both oxides. The Cr content in both oxide minerals is however higher than in the equivalent cumulates of the Bjerkreim-Sokndal intrusion. Although immiscibility as the mechanism of enrichment leading to silicate-absent oxide-apatite veins, as in Hestnes and Eigerøy, cannot be precluded, there is no direct evidence in the veins, nor has any structural or geochemical evidence of immiscibility ever been found in jotunite dykes and Fe-Ti-P-rich rocks. Further investigations on the influence of subsolidus exchange of elements between the two oxides are needed to improve the use of trace elements as differentiation indexes.     

Emplacement of Proterozoic massif-type anorthosite during regional shortening: evidence from the Bolangir anorthosite complex (Eastern Ghats Province, India)

A study of the 933±32-Ma-old Bolangir massif-type anorthosite complex (Eastern Ghats Province, India) yielded strong evidence for anorthosite emplacement during regional shortening, and thereby new insights in massif-type anorthosite formation. Several lines of evidence strongly suggest synchronism of plutonism and regional deformation. First, structures in the country rocks, which imply N–S-directed shortening accompanied by E–W extension, are mirrored by a E–W trending post-magmatic foliation and N–S trending shear zones in the anorthosite complex. Near the intrusion, the foliation in the country rocks becomes parallel to the contact and an internal marginal foliation, and foliation triple points occur in the country rocks. Second, synshortening dikes inside and outside the anorthosite complex are filled with pluton-related melts. Third, ferrodiorites, which are considered late-stage differentiates of the anorthositic pluton, concentrate in tectonic voids at the pluton margin. Some of these occurrences have been affected by the last increments of the regional deformation, but others transect the same structures. Ascent mechanism and significance of the adjacent terrane boundary of the Eastern Ghats Belt for ascent and emplacement of the Bolangir anorthosite complex are discussed. The results of this study imply that emplacement of Proterozoic massif-type anorthosite is not restricted to extensional settings.     

Syndeformational recrystallization – dynamic or compositionally induced?

Dynamic recrystallization in the strict sense of the term is the reconstitution of crystalline material without a change in chemical composition, driven by strain energy in the form of dislocations. Driving potentials additional to internal strain energy may contribute to the recrystallization of naturally deformed minerals, which form solid solutions such as feldspar, amphiboles and pyroxenes, if they change their composition during recrystallization. To estimate the relative importance of these driving potentials, the chemical composition of porphyroclasts and recrystallized grains of plagioclase, clinopyroxene and hornblende have been investigated in samples from a high grade shear zone of the Ivrea Zone, Italy. The plagioclases show two different recrystallization microstructures: bulging recrystallization at grain boundaries and discrete zones of recrystallized grains across porphyroclasts probably involving fracturing. Deformation took place under amphibolite facies conditions on a retrograde P,T-path. Porphyroclast and recrystallized compositions from bulging recrystallization microstructures differ only in their Or-content and yield a ΔG between mean host grain and mean recrystallized grain composition at fixed P,T-conditions of approximately 5 Joules/10⁻⁴ m³. Extreme compositional variations yield approximately 60 J/10⁻⁴m³. The increase of free energy due to dislocations calculated for common glide systems in plagioclase are on the order of 100 Joules/10⁻⁴m³ for high values of dislocation densities of 10¹⁴m⁻². Thus, the effect of chemically induced driving energies on grain boundary velocity appears small for mean compositions but may be as great as that of deformational energies for larger chemical differences. In the other type of microstructure, porphyroclasts and recrystallized grains in discrete zones differ in their anorthite content. The maximum ΔG induced by the compositional disequilibrium is on the order of 100 J/10⁻⁴m³. This maximum value is of the same magnitude as the ΔG derived from high dislocation densities of 10¹⁴ m⁻². The resulting combined ΔG is approximately twice as high as for deformational ΔG alone, and heterogeneous nucleation may become a feasible recrystallization mechanism which is evident from the microstructures. The recrystallization mechanism depends on the nature of the driving potential. Grain boundary migration (GBM) and heterogeneous nucleation can release Gibbs free energy induced by compositional disequilibrium, whereas this is not likely for subgrain rotation. Therefore, only GBM and heterogeneous nucleation may link metamorphism and deformation, so that syndeformational recrystallization may represent a transitional process ranging from dynamic recrystallization to metamorphic reaction. Received: 8 July 1996 / Accepted: 17 November 1997     

Anorthositic Rocks of the Duluth Complex: Examples of Rocks Formed from Plagioclase Crystal Mush

Anorthositic rocks compose 35–40% of the Middle Proterozoic(Keweenawan; 1?1 Ga) Duluth Complex—a large, compositemafic body in northeastern Minnesota that was intruded beneatha comagmatic volcanic edifice during the formation of the Midcontinentrift system. Anorthositic rocks, of which six general lithologictypes occur in one area of the complex, are common in an earlyseries of intrusions. They are characterized on a local scale(meters to kilometers) by nonstratiform distribution of rocktypes, variably oriented plagioclase lamination, and compositeintrusive relationships. Variably zoned, subhedral plagioclaseof nearly constant average An (60) makes up 82–98% ofthe anorthositic rocks. Other phases include granular to poikiliticolivine (Fo_66–38), poikilitic clinopyrox-ene (En'_73–37),subpoikilitic Fe-Ti oxides, and various late-stage and secondaryminerals. Whole-rock compositions of anorthositic rocks are modelled bymass balance to consist of three components: cumulus plagioclase(70–95 wt.%), minor cumulus olivine (0–5%), anda gabbroic postcumulus assemblage (5–27%) representinga trapped liquid. The postcumulus assemblage has textural andcompositional characteristics which are consistent with crystallizationfrom basaltic magma ranging from moderately evolved olivinetholeiite to highly evolved tholeiite (mg=60–25). Sympatheticvariations of mg in plagioclase and in mafic minerals suggestthat cumulus plagioclase, though constant in An, was in approximateequilibrium with the variety of basaltic magma compositionswhich produced the postcumulus assemblages. Standard models of mafic cumulate formation by fractional crystallizationof basaltic magmas in Duluth Complex chambers, although ableto explain the petrogenesis of younger stratiform troctoliticto gabbroic intrusions, are inadequate to account for the field,petrographic, and geochemical characteristics of the anorthositicrocks. Rather, we suggest an origin by multiple intrusions ofplagioclase crystal mushes—basaltic magmas charged withas much as 60% intratelluric plagioclase. The high concentrationsof cumulus plagioclase (70–95%) estimated to compose theanorthositic rocks may reflect expulsion of some of the transportingmagma during emplacement or early postcumulus crystallizationof only plagioclase from evolved hyperfeldspathic magma. Althoughthe evolved compositions of anorthositic rocks require significantfractionation of mafic minerals, geophysical evidence indicatesthat ultramafic rocks are, as exposure implies, rare in theDuluth Complex and implies that plagioclase crystal mushes werederived from deeper staging chambers. This is consistent withinterpretations of olivine habit and plagioclase zoning. Moreover,plagioclase could have been segregated from coprecipitatingmafic phases in such lower crustal chambers because of the buoyancyof plagioclase in basaltic magmas at high pressure. The geochemicaleffects of plagioclase suspension in basaltic magmas are consistentwith observed compositions of cumulus plagioclase in the anorthositicrocks and with the geochemical characteristics of many comagmaticbasalts. The petrogenesis of the anorthositic rocks and theoverall evolution of Keweenawan magmas can be related to thedynamics of intracontinental rift formation.     

The Plagioclase-Magma Density Paradox Re-examined and the Crystallization of Proterozoic Anorthosites

Intermediate-composition plagioclase (An_40–60) is typicallyless dense than the relatively evolved basaltic magmas fromwhich it crystallizes and the crystallization of plagioclaseproduces a dense residual liquid, thus plagioclase should havea tendency to float in these magmatic systems. There is, however,little direct evidence for plagioclase flotation cumulates eitherin layered intrusions or in Proterozoic anorthosite complexes.The layered series of the Poe Mountain anorthosite, southeastWyoming, contains numerous anorthosite–leucogabbro blocksthat constrain density relations during differentiation. Allblocks are more mafic than their hosting anorthositic cumulates,their plagioclase compositions are more calcic, and each blockis in strong Sr isotopic disequilibrium with its host cumulate.Associated structures—disrupted and deformed layering—indicatethat (1) a floor was present during crystallization and thatplagioclase was accumulating and/or crystallizing on the floor,(2) compositional layering and plagioclase lamination formeddirectly at the magma–crystal pile interface, and (3)the upper portions of the crystal pile contained significantamounts of interstitial melt. Liquid densities are calculatedfor proposed high-Al olivine gabbroic parental magmas and Fe-enrichedferrodioritic and monzodioritic residual magmas of the anorthositestaking into account pressure, oxygen fugacity, P₂O₅, estimatedvolatile contents, and variable temperatures of crystallization.For all reasonable conditions, calculated block densities aregreater than those of the associated melt. The liquid densities,however, are greater than those for An_40–60 plagioclase,which cannot have settled to the floor. Plagioclase must eitherhave been carried to the floor in relatively dense packets ofcooled liquid plus crystals or have crystallized in situ. Asloping floor, possibly produced by diapiric ascent of relativelylight plagioclase-rich cumulates, is required to allow for drainingand removal of the dense interstitial liquid produced in thecrystal pile and may be a characteristic feature during thecrystallization of many Proterozoic anorthosites and layeredintrusions. KEY WORDS: magma; density; Proterozoic anorthosites; blocks; plagioclase     

Anorthosite formation by plagioclase flotation in ferrobasalt and implications for the lunar crust

The Sept Iles layered intrusion (Quebec, Canada) is dominated by a basal Layered Series made up of troctolites and gabbros, and by anorthosites occurring (1) at the roof of the magma chamber (100-500 m-thick) and (2) as cm- to m-size blocks in gabbros of the Layered Series. Anorthosite rocks are made up of plagioclase, with minor clinopyroxene, olivine and Fe-Ti oxide minerals. Plagioclase displays a very restricted range of compositions for major elements (An₆₈-An₆₀), trace elements (Sr: 1023-1071 ppm; Ba: 132-172 ppm) and Sr isotopic ratios (⁸⁷Sr/⁸⁶Sr_i: 0.70356-0.70379). This compositional range is identical to that observed in troctolites, the most primitive cumulates of the Layered Series, whereas plagioclase in layered gabbros is more evolved (An₆₀-An₃₈). The origin of Sept Iles anorthosites has been investigated by calculating the density of plagioclase and that of the evolving melts. The density of the FeO-rich tholeiitic basalt parent magma first increased from 2.70 to 2.75 g/cm³ during early fractionation of troctolites and then decreased continuously to 2.16 g/cm³ with fractionation of Fe-Ti oxide-bearing gabbros. Plagioclase (An₆₉-An₆₀) was initially positively buoyant and partly accumulated at the top of the magma chamber to form the roof anorthosite. With further differentiation, plagioclase (<An₆₀) became negatively buoyant and anorthosite stopped forming. Blocks of anorthosite (autoliths) even fell downward to the basal cumulate pile. The presence of positively buoyant plagioclase in basal troctolites is explained by the low efficiency of plagioclase flotation due to crystallization at the floor and/or minor plagioclase nucleation within the main magma body. Dense mafic minerals of the roof anorthosite are shown to have crystallized from the interstitial liquid.The processes related to floating and sinking of plagioclase in a large and shallow layered intrusion serve as a proxy to refine the crystallization model of the lunar magma ocean and explain the vertically stratified structure of the lunar crust, with (gabbro-)noritic rocks at the base and anorthositic rocks at the top. We propose that the lunar crust mainly crystallized bottom-up. This basal crystallization formed a mafic lower crust that might have a geochemical signature similar to the magnesian-suite without KREEP contamination, while flotation of some plagioclase grains produced ferroan anorthosites in the upper crust.     

Microstructural evidence for the transition from dislocation creep to dislocation-accommodated grain boundary sliding in naturally deformed plagioclase

We use quantitative microstructural analysis including misorientation analysis based on electron backscatter diffraction (EBSD) data to investigate deformation mechanisms of naturally deformed plagioclase in an amphibolite gabbro mylonite. The sample is from lower oceanic crust exposed near the Southwest Indian Ridge, and it has a high ratio of recrystallized matrix grains to porphyroclasts. Microstructures preserved in porphyroclasts suggest that early deformation was achieved principally by dislocation creep with subgrain rotation recrystallization; recrystallized grain (average diameter ∼8 μm) microstructures indicate that subsequent grain boundary sliding (GBS) was active in the continued deformation of the recrystallized matrix. The recrystallized matrix shows four-grain junctions, randomized misorientation axes, and a shift towards higher angles for neighbor-pair misorientations, all indicative of GBS. The matrix grains also exhibit a shape preferred orientation, a weak lattice preferred orientation consistent with slip on multiple slip systems, and intragrain microstructures indicative of dislocation movement. The combination of these microstructures suggest deformation by dislocation-accommodated GBS (DisGBS). Strain localization within the recrystallized matrix was promoted by a transition from grain size insensitive dislocation creep to grain size sensitive GBS, and sustained by the maintenance of a small grain size during superplasticity.     

Microstructure and geochemistry of plagioclase and microcline in naturally deformed granite

Naturally deformed feldspars from foliated granites in a shear zone in Newfoundland exhibit transitional brittle-ductile behaviour. Brittle failure is subordinate to dynamic recrystallization, microcracking, strain enhanced diffusion and reaction enhanced ductility during the deformation. Both plagioclase (An₂₈) and K-feldspar are transformed to albite with increasing strain. Interaction of metamorphic and structural processes at the grain scale is emphasised. This is illustrated with examples of quartz-filled veins (segregation bands) in plagioclase and recrystallized polycrystalline aggregates in plagioclase and K-feldspar. The role of microcracking in plagioclase and of pre-existing internal growth structures in the formation of initially coarse grained recrystallized aggregates from large single crystals is suggested.     

Geochemistry of the shawmere anorthosite complex,kapuskasing structural zone,Ontario

The Archean Shawmere Anorthosite Complex, at the southern end of the Kapuskasing Structural Zone, consists dominantly of anorthosite (An_{65 –85}) with minor gabbroic and ultramafic units, which are completely enclosed and cut by tonalites. Both the anorthosites and the tonalites are themselves cut by narrow dikes of gabbroic anorthosite. All of the rocks have undergone high grade metamorphism and are recrystallized so that few igneous textures remain.The anorthosites, gabbros and ultramafic rocks of this complex are cumulates which contain calcic plagioclase (An_65–95) and have atomic Mg/(Mg + Fe²⁺) ratios (Mg#) greater than 0.6; less than 3 ppm Rb; 150–210 ppm Sr; and less than 60 ppm Ba. REE abundanees range from 0.2 to 10 times chondritic and exhibit both light-enriched and light-depleted REE patterns. The lower Mg^# for the samples having more enriched light REE indicates substantial fractions of ferromagnesian minerals crystallized in addition to plagioclase during fractional crystallization, suggesting that the parent magma was basaltic, and not anorthositic. The ranges in Sr, Ba and REE abundances required for the magmas are typical of those for tholeiitic basalts from Archean greenstone belts. Thus the Shawmere Anorthosite Complex may represent cumulates of a crustal-level magma chamber which could have been the immediate source of basic Archean volcanics.One gabbroic anorthositic dike sample has a steeply fractionalted REE pattern with heavy REE abundances less than chondrites and a large positive Eu anomaly. The proposed interpretations is that this rock formed by partial melting of mafic cumulates, perhaps those of the Shawmere Anorthosite Complex itself.     

攀西地区新街层状岩体粒间不混熔作用:来自斜长石环带结构的记录

位于攀西地区的新街层状岩体赋含大量钒钛磁铁矿,是峨眉山大火成岩省的一部分。岩体下部带和中部带以单斜辉石岩为主,并伴生浸染状钒钛磁铁矿矿化;上部带以辉长岩为主,赋存厚层的钒钛磁铁矿矿体。之前研究认为厚层的钒钛磁铁矿矿体的形成与粒间不混熔的富Fe熔体有关,但对富Fe熔体的演化过程缺乏细致研究。本文通过对新街岩体上部带的富矿辉长岩层和上覆浅色辉长岩中斜长石环带结构和成分的研究,揭示了富Fe熔体的演化过程。在浅色辉长岩中保存的岩浆不混熔的直接证据表现为矿物粒间共轭的富Si交生体和富钛铁矿交生体代表的非反应结构。本次研究发现,与粒间富Si交生体接触的斜长石边部的FeO和TiO_2含量随斜长石牌号(An)值的降低而降低,而与粒间富钛铁矿交生体接触的斜长石边部的FeO和TiO_2含量随An值的降低而升高,说明斜长石的边部成分变化记录了粒间共轭的富Si和富Fe熔体的成分特征。在富矿辉长岩中,斜长石可分为初生和新生两种,初生斜长石的An值介于57~62,FeO含量为0.34%~0.50%,TiO_2含量为0.06%~0.13%,新生斜长石具有相对较高的An值(61~81)和FeO、TiO_2含量,二者的内部和边部还发育增生斜长石,其An值(~50)相对较低;在初生斜长石边部可见不连续的新生斜长石环带和增生斜长石边,造成其内部成分显著不均一,并发育复杂的环带结构。本文认为,初生斜长石是岩浆正常分离结晶作用的产物。在粒间熔体发生不混熔后,不混熔的富Fe熔体逐渐向岩浆房下方迁移并结晶出了一些相对高An值的新生斜长石,或沿一些初生斜长石边部生长形成不连续的高An环带。当富Fe熔体演化至晚期,由于矿物生长空间受限,仅在初生和新生斜长石局部形成了相对低An值的增生边、或沿颗粒裂隙进入斜长石内部形成增生斜长石核。     

Interaction of chemical and physical processes during deformation at fluid-present conditions: a case study from an anorthosite–leucogabbro deformed at amphibolite facies conditions

We present microstructural and chemical analyses of chemically zoned and recrystallized plagioclase grains in variably strained samples of a naturally deformed anorthosite–leucogabbro, southern West Greenland. The recorded microstructures formed in the presence of fluids at mid-crustal conditions (620–640 °C, 7.4–8.6 kbar). Recrystallized plagioclase grains (average grain size 342 μm) with a random crystallographic orientation are volumetrically dominant in high-strain areas. They are characterized by asymmetric chemical zoning (An₈₀ cores and An₆₄ rims) that are directly associated with areas exhibiting high amphibole content and phase mixing. Analyses of zoning indicate anisotropic behaviour of bytownite plagioclase with a preferred replacement in the $ \left\langle {0 10} \right\rangle $ direction and along the (001) plane. In areas of high finite strain, recrystallization of plagioclase dominantly occurred by bulging recrystallization and is intimately linked to the chemical zoning. The lack of CPO as well as the developed asymmetric zoning can be explained by the activity of grain boundary sliding accommodated by dissolution and precipitation creep (DPC). In low-strain domains, grain size is on average larger and the rim distribution is not related to the inferred stress axes indicating chemically induced grain replacement instead of stress-related DPC. We suggest that during deformation, in high-strain areas, pre-existing phase mixture and stress induced DPC-caused grain rotations that allowed a deformation-enhanced heterogeneous fluid influx. This resulted in local plagioclase replacement through interface-coupled dissolution and precipitation and chemically induced grain boundary migration, accompanied by bulging recrystallization, along with neocrystallization of other phases. This study illustrates a strong interaction and feedback between physical and chemical processes where the amount of stress and fluids dictates the dominant active process. The interaction is a cause of deformation and external fluid infiltration with a result of strain localization and chemical re-equilibration at amphibolite facies conditions.     

Evolution of the skærgaard magma: evidence from crystallized melt inclusions

Polymineralic aggregates composed of clinopyroxene, Fe-Ti oxide minerals, apatite and accessory K-feldspar, biotite, and amphibole are enclosed in cumulus plagioclase grains in the Middle Zone of the Skærgaard intrusion. The chemistry of the minerals in the aggregates, and the textural relations between the aggregates and the host plagioclase grains indicate that they represent inclusions of the contemporaneous melt of the Skærgaard intrusion. Through mass balance calculations a quantitative estimate of the melt composition for this level in the intrusion can be obtained, and this estimate confirms that the silica content in the Middle Zone melt was similar to, or possibly even lower than, the silica content in the initial Skærgaard melt, and relatively enriched in iron.     

Local disequilibrium of plagioclase in high-temperature shear zones of the Ivrea Zone, Italy

Abstract Microstructural and chemical analysis of plagioclase in 20 superficially similar amphibolite facies ductile shear zones in metagabbors and amphibolites of the Ivrea Zone in Italy reveals significant differences in An and Ba contents. Plagioclase, which was deformed at P-T conditions lower than those of the wall rocks, occurs in the following four different microstructural situations with different chemical compositions: (i) relatively undeformed porphyroclasts, (ii) dynamically recrystallized grains and subgrains rimming the porphyroclasts, (iii) infill of microcracks cross-cutting the porphyroclasts and (iv) fine-grained recrystallized grains in the matrix of the shear zones. The differences in the An and Ba contents are caused by partial chemical equilibration of plagioclase in the shear zones during and partly after deformation. Changes in An and Ba contents were caused by fluid-assisted grain-boundary migration recrystallization, as well as by solid-state diffusion, while fluid activity was high. The relation between the composition and microstructures of the plagioclase in the shear zones indicates that in the different shear zones, fluids ceased to be active during different stages in the late shear zone deformation history.
The interpretation of the variations in composition and microstructures reveals that only grains that developed by grain-boundary migration recrystallization and that are not adjacent to porphyroclasts reflect P-T conditions during the dominant shear-zone deformation.     

An overview on geochemistry of Proterozoic massif-type anorthosites and associated rocks

A critical study of 311 published WR chemical analyses, isotopic and mineral chemistry of anorthosites and associated rocks from eight Proterozoic massif anorthosite complexes of India, North America and Norway indicates marked similarities in mineralogy and chemistry among similar rock types. The anorthosite and mafic-leucomafic rocks (e.g., leuconorite, leucogabbro, leucotroctolite, anorthositic gabbro, gabbroic anorthosite, etc.) constituting the major part of the massifs are characterized by higher Na₂O + K₂O, Al₂O₃, SiO₂, Mg# and Sr contents, low in plagioclase incompatible elements and REE with positive Eu anomalies. Their δ ¹⁸O‰ (5.7–7.5), initial ⁸⁷Sr/⁸⁶Sr (0.7034–0.7066) and ɛ _Nd values (+1.14 to +5.5) suggest a depleted mantle origin. The Fe-rich dioritic rocks occurring at the margin of massifs have isotopic, chemical and mineral composition more close to anorthosite-mafic-leucomafic rocks. However, there is a gradual decrease in plagioclase content, An content of plagioclase and X_Mg of orthopyroxene, and an increase in mafic silicates, oxide minerals content, plagioclase incompatible elements and REE from anorthosite-mafic-leucomafic rocks to Fe-rich dioritic rocks. The Fe-rich dioritic rocks are interpreted as residual melt from mantle derived high-Al gabbro melt, which produced the anorthosite and mafic-leucomafic rocks. Mineralogically and chemically, the K-rich felsic rocks are distinct from anorthosite-mafic-leucomafic-Fe-rich dioritic suite. They have higher δ ¹⁸O values (6.8–10.8‰) and initial ⁸⁷Sr/⁸⁶Sr (0.7067–0.7104). By contrast, the K-rich felsic suites are products of melting of crustal precursors.     

Petrogenesis of massif-type anorthosite complex, Gruber, Central Dronning Maud Land, East Antarctica： Implications for magma source and evolution

The origin of anorthosite and associated igneous gabbronorite and ferrodiorite was investigated through detailed study of a typical massif-type anorthosite complex from Gruber, Central Dronning Maud Land, East Antarctica. Field observations showed that the Gruber Complex is made up of gabbronorite-anorthosite pluton which was intruded by ferrodiorite dykes. Systematic samples collected from the Gruber Complex revealed significant geochemical variations within the region. Four rock types have been identified, based on modal proportions of mineral phases and their geochemistry data. Clinopyroxene-gabbronorite and plagioclase-gabbronorite are the two types of gabbronorite with the dominance of clinopyroxene and plagioclase, respectively. Anorthosite is represented by rocks having predominance of plagioclase with minor clinopyroxene. Ferrodiorite is characterized by modal abundance of orthopyroxene and Fe-Ti oxide. Major and trace element systematics showed that all the four rock types are co-magmatic and are related through fractional crystallization. Based on this study, it is reported that clinopyroxene was the first phase to crystallize followed by plagioclase and then Fe-Ti oxides. Furthermore, trace element composition of the parental melt was calculated using LA-ICPMS analysis of the most primitive, pure clinopyroxene found in the clinopyroxene gabbronorite. Our analyses suggested that the parental melt was similar to that of continental arc basalt and showed signatures of subduction-related metasomatism. Based on mineral chemical and geochemical data, it is interpreted that the parent melt went through changing sequence of crystallization which led to the formation of massive anorthosite.     

Oxygen isotope constraints on the petrogenesis of the Sybille intrusion of the Proterozoic Laramie Anorthosite Complex

The origin of monzonitic intrusions that are associated with Proterozoic massif-type anorthosite complexes is controversial. A detailed oxygen isotope study of the Sybille intrusion, a monzonitic intrusion of the Laramie Anorthosite Complex (Wyoming), indicates that either derivation from a basaltic magma of mantle origin with a metasedimentary component (∼20%) incorporated early in its magmatic history, or a partial melt of lower crustal rocks is consistent with the data. The oxygen isotope compositions of plagioclase, pyroxene and zircon from the Sybille monzosyenite, the dominant rock type in the Sybille intrusion, were analyzed in order to establish the isotopic composition of the source of the magma. Plagioclase δ¹⁸O values range from 6.77 to 9.17‰. We interpret the higher plagioclase δ¹⁸O values (average 8.69 ± 0.30‰, n = 19) to be magmatic in origin, lower plagioclase δ¹⁸O values (average 7.51 ± 0.44‰, n = 22) to be the result of variable subsolidus alteration, and pyroxene δ¹⁸O values (average 6.34 ± 0.38‰, n = 19) to be the result of closed-system diffusional exchange during cooling. Low magnetic zircons, which have been shown to retain magmatic oxygen isotope values despite high grade metamorphism and extensive subsolidus hydrothermal alteration, have δ¹⁸O values (7.40 ± 0.24‰, n = 11) which are consistent with our interpretation of the plagioclase and pyroxene results. Oxygen isotope data from all three minerals indicate that the magmatic oxygen isotope composition of the Sybille intrusion is enriched in ¹⁸O relative to the composition of average or “normal” mantle-derived magmas. This enrichment is approximately twice the oxygen isotope enrichment that could result from closed-system fractionation, rendering a closed-system, comag- matic petrogenetic model between the Sybille intrusion and the mantle-derived anorthositic lithologies of the Laramie Anorthosite Complex improbable. Received: 7 April 1998 / Accepted: 19 January 1999     

Origin of Archean anorthosites: Evidence from the Bad Vermilion Lake anorthosite complex,Ontario

The Bad Vermilion Lake anorthosite complex (2,700 m.y.) is exposed over an area of about 100 km² near Rainy Lake, Ontario. As is typical of other Archean anorthosites, it is composed of coarse (1–30 cm across), equidimensional, euhedral to subhedral, calcic (An₈₀) plagioclase, in a finer grained mafic matrix. The amount of mafic matrix in individual samples ranges from none to about 70% by volume. The complex has been variably metamorphosed to greenschist facies. Zoisite, chlorite, and hornblende are abundant, but primary plagioclase is preserved in many places. The anorthosite complex is associated with gabbro and with mafic to felsic metavolcanic rocks, and is cut by tonalite plutons and by mafic dikes. Some gabbros contain local concentrations of Fe-Ti oxides and/or apatite, but no chromite. The mafic groundmass of the anorthositic rocks is similar in major and trace element chemistry, including rare earth elements, to the associated basaltic metavolcanics, suggesting that the anorthositic complex may have accumulated from a subvolcanic magma chamber which fed mafic lavas to the surface during its crystallization. Mafic flows and dikes chemically similar to the mafic metavolcanics contain plagioclase megacrysts akin to those of the anorthositic rocks, and thus may represent a link between the anorthosite complex and associated mafic lavas. Elongate pretectonic tonalite intrusions were comagmatic with the felsic metavolcanics, but not with the anorthosites or metabasalts. These silicic rocks may represent low-pressure partial melts of the mafic rocks. There is no direct or indirect evidence for significant volumes of ultramafic material at the present exposure level of the complex. An estimate of the bulk composition of all rocks presumed to be comagmatic with the anorthosites, including gabbros and mafic metavolcanics, is an aluminous basalt with about 20 wt.% Al₂O₃. This composition has REE abundances unlike those of typical Archean high-Al basalts and probably does not represent that of a primary or evolved melt. The possibility must be considered, therefore, that a substantial fraction of material comagmatic with the anorthosites has been separated from the complex, either by magmatic or tectonic processes.     

Schlieren formation in diatexite migmatite: examples from the St Malo migmatite terrane, France

Schlieren are trains of platy or blocky minerals, typically the ferromagnesian minerals and accessory phases, that occur in granites and melt‐rich migmatites, such as diatexites. They have been considered as: (1) unmelted residue from xenoliths or the source region; (2) mineral accumulations formed during magma flow; (3) compositional layering; and (4) sites of melt loss. In order to help identify schlieren‐forming processes in the diatexites at St Malo, differences in the size, shape, orientation, distribution and composition of the biotite from schlieren and from their hosts have been investigated. Small biotite grains are much less abundant in the schlieren than in their hosts. Schlieren biotite grains are generally larger, have greater aspect ratios and have, except in hosts with low (< 10%) biotite contents, a much stronger shape preferred orientation than host biotite. The compositional ranges of host and schlieren biotite are similar, but schlieren biotite defines tighter, sharper peaks on composition‐frequency plots. Hosts show magmatic textures such as imbricated (tiled), unstrained plagioclase. Some schlieren show only magmatic textures (tiled biotite, no crystal‐plastic strain features), but many have textures indicating submagmatic and subsolidus deformation (e.g. kinked grains) and these schlieren show the most extensive evidence for recrystallization. Magmas at St Malo initially contained a significant fraction of residual biotite and plagioclase crystals; smaller biotite grains were separated from the larger plagioclase crystals during magma flow. Since plagioclase was also the major, early crystallizing phase, the plagioclase‐rich domains developed rapidly and reached the rigid percolation threshold first, forcing further magma flow to be concentrated into narrowing melt‐rich zones where the biotite had accumulated, hence increasing shear strain and the degree of shape preferred orientation in these domains. Schlieren formed in these domains as a result of grain contacts and tiling in the grain inertia‐regime. Final amalgamation of the biotite aggregates into schlieren involved volume loss as melt trapped between grains was expelled after the rigid percolation threshold was reached in the biotite‐rich layers.     

STAGES OF KIMBERLITE DEVELOPMENT AND EVOLVING CONDITIONS OF DIAMOND FORMATION

Ultramafic/mafic complexes hosting Fe-Ni-Cu mineralization occur as small, lensoidal bodies within the Svecofennian, molasse-like metasedimentary rocks of the Vammala Nickel Belt (VNB) in southwestern Finland. One of them, the Sääksjärvi metaperidotitemetagabbro complex, has been studied to gain a better understanding of their petrogenesis and timing of emplacement. These ultramafic rocks were emplaced before the regional upper-amphibolite-facies metamorphism of the Svecofennian orogeny. They recrystallized to amphibole-dominated assemblages comprising: (1) in metaperidotiteolivine + magnesian hornblende ± chromite ± enstatite ± augite ± phlogopite; (2) in hornblendite-actinolitic hornblende ± augite ± plagioclase ± Fe-Ti oxides; and (3) in metagabbro-actinolitic hornblende + plagioclase ± Fe-Ti oxides ± biotite. The recrystallization was accompanied by changes that involved the formation of a lattice-preferred orientation in olivine and porphyroclastic, poikiloblastic, and equigranular textures.

Geochemical modeling indicates that the ultramafic rocks were derived from a tholeiitic magma (Mg/Mg + Fe = 0.58 to 0.62; Ni = 90 to 120 ppm; low Ti content) by olivine (Fo_78-84) accumulation and, in the case of the gabbro differentiates, accumulation of olivine with subordinate clinopyroxene and plagioclase. The geochemical character is that of island-arc low-Ti tholeiites and, like other VNB intrusions, involves enrichment of light-ion-lithophile elements and rare-earth elements relative to high-field-strength elements compared with normalized mid-oceanic-ridge basalts; this is particularly evident in the Nd/Nb, Zr/Nb, and Th/ Nb ratios. In the studied cumulate body, the sheared margins and the contact-parallel foliation indicate that the ultramafic bodies underwent plastic deformation and possibly were displaced along the evolving foliation in the more ductile migmatitic country rocks. This is contrary to previous interpretations of the VNB ultramafic bodies, which have been treated essentially as unmodified in situ magmatic intrusions.     

Microstructural and metamorphic evolution of a high‐pressure granitic orthogneiss during continental subduction (Orlica–Śnieżnik dome,Bohemian Massif)

A microstructural and metamorphic study of a naturally deformed medium‐ to high‐pressure granitic orthogneiss (Orlica–?nie?nik dome, Bohemian Massif) provides evidence of behaviour of the felsic crust during progressive burial along a subduction‐type apparent thermal gradient (～10 °C km^?1). The granitic orthogneisses develops three distinct microstructural types, as follows: type I – augen orthogneiss, type II – banded orthogneiss and type III – mylonitic orthogneiss, each representing an evolutionary stage of a progressively deformed granite. Type I orthogneiss is composed of partially recrystallized K‐feldspar porphyroclasts surrounded by wide fronts of myrmekite, fully recrystallized quartz aggregates and interconnected monomineralic layers of recrystallized plagioclase. Compositional layering in the type II orthogneiss is defined by plagioclase‐ and K‐feldspar‐rich layers, both of which show an increasing proportion of interstitial minerals, as well as the deformation of recrystallized myrmekite fronts. Type III orthogneiss shows relicts of quartz and K‐feldspar ribbons preserved in a fine‐grained polymineralic matrix. All three types have the same assemblage (quartz + plagioclase + K‐feldspar + muscovite + biotite + garnet + sphene ± ilmenite), but show systematic variations in the composition of muscovite and garnet from types I to III. This is consistent with the equilibration of the three types at different positions along a prograde P?T path ranging from <15 kbar and <700 °C (type I orthogneiss) to 19–20 kbar and >700 °C (types II and III orthogneisses). The deformation types thus do not represent evolutionary stages of a highly partitioned deformation at constant P?T conditions, but reflect progressive formation during the burial of the continental crust. The microstructures of the type I and type II orthogneisses result from the dislocation creep of quartz and K‐feldspar whereas a grain boundary sliding‐dominated diffusion creep regime is the characteristic of the type III orthogneiss. Strain weakening related to the transition from type I to type II microstructures was enhanced by the recrystallization of wide myrmekite fronts, and plagioclase and quartz, and further weakening and strain localization in type III orthogneiss occurred via grain boundary sliding‐enhanced diffusion creep. The potential role of incipient melting in strain localization is discussed.