Evidence for early miocene wrench faulting in the Marlborough fault system,New Zealand: structural implications

In New Zealand, the Marlborough strike-slip faults link the Hikurangi subduction zone to the Alpine fault collision zone. Stratigraphic and structural analysis in the Marlborough region constrain the inception of the current strike-slip tectonics.Six major Neogene basins are investigated. Their infill is composed of marine and freshwater sediments up to 3 km thick; they are characterised by coarse facies derived from the basins bounding relief, high sedimentation rates and asymmetric geometries. Proposed factors that controlled the basins' generation are the initial geometry of the strike-slip faults and the progressive strike-slip motion. Two groups of basins are presented: the early Miocene (23 My) basins were generated under wrench tectonics above releasing-jogs between basement faults. The late Miocene (11 My) basins were initiated by halfgrabens tilted along straighter faults during a transtensive stage. Development of faults during Cretaceous to Oligocene times facilitated the following propagation of wrench tectonics. The Pliocene (5 My) to current increasing convergence has shortened the basins and distorted the Miocene array of faults. This study indicates that the Marlborough Fault System is an old feature that connected part of the Hikurangi margin to the Alpine fault since the subduction and collision initiation.     

Wrench tectonics flip at oblique subduction. A model from New Zealand

In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003).     

Faulting history at the eastern termination of the High Atlas Fault (Western High Atlas,Morocco)

At its eastern termination, the High Atlas Fault in the Western High Atlas in Morocco, consists of a splay of three faults. In the interjacent fault blocks, Neo- and Paleoproterozoic basement, forming the northernmost extremity of the NW-African Craton, is cropping out. The Precambrian basement witnesses a long history of brittle deformation starting at the end of the Pan-African Orogeny. A subsequent episode of normal faulting can be related to the development of a Hercynian basin along the northern passive margin of the cratonic promontory. With regard to the main tectonic activity in the Western High Atlas, basically two models exist: one emphasising block tectonics reflecting Mesozoic rifting followed by Alpine uplift and inversion, the other emphasising Late Paleozoic dextral wrench tectonics. The analysis of the fault activity along the splay faults reveals a predominantly Alpine history, consisting of the Triassic development of the Atlas Rift along the axial zone of the orogen, followed by uplift and inversion. The Late Jurassic to Cenozoic fault activity took place in a sinistral transpressive regime and was partitioned over the three splay faults. Dextral strike-slip fault activity could not be demonstrated in the fault blocks nor along the splay faults. Therefore the faults were probably not involved in Late Paleozoic dextral wrench tectonics.     

论走滑断层作用的几个主要问题

介绍了走滑断层作用研究前缘的若干主要方面。认为普遍使用走滑断层的术语外，在大陆上当断层性质不明时可使用平移断层。强调了单剪机制对大型走滑断层形成的作用，并评论了Ｘ破裂的纯剪理论。基于我国郯庐断裂带等的研究成果，提出走滑断层作用的若干新概念。指出剪曲（牵引）构造不同于雁列褶皱。认为中国地质学家从地质力学研究走滑断层的旋转构造已有卓绝的成就，只要同世界科学接轨，就会获得新的巨大生命力。文中描述了确定位移的方法，提出平移幅度与错距是两个不同的概念。强调了剪切热在大陆构造中的作用，提出走滑剪切带演化中剪切变形－断裂动热变质－重熔岩浆作用旋回。讨论了剪切成矿作用及已成矿体、矿带的走滑错移及变形。划分了三种基本走滑盆地类型及论证了大陆浅源走滑型地震机制。     

中国含油气盆地构造分析主要进展与展望

本文简要总结了中国含油气盆地构造分析的主要进展。中国区域大地构造理论特别是板块构造理论，对于指导盆地构造研究起了重要作用。通过各种地球物理探测方法，揭示了中国含油气盆地的上地幔结构，地壳结构、基底结构与盖层构造的关系。中国含油气盆地在地质历史中的演化过程十分复杂，伸展盆地、前陆盆地、走滑盆地、克拉通盆地和叠合具有各自独特的地球动力学系统。构造样式分析是盆地构造分析的重要方面，直接与寻找油气圈闭有关，可以划分出伸展构造、挤压构造、走滑构造、反转构造和潜山－披覆构造等。断裂和不含油气盆地中的重要构造要素，控制着油气运聚成藏、叠合盆地多期成盆、多期改造造成的复杂构成图像，是中国含油气盆地的重要特色之一。展望21世纪 中国油气盆地构造分析，需要重点关注的是：叠合盆地形成演化和地球动力学过程分析；盆－山耦合过程的深部－浅部耦全过程分析；盆地三维构造精细描述和盆地模拟技术，盐构造和天然气构造分析。     

Sedimentological and Petrographical Aspects of Upper Miocene Evaporites in the Beypazari and Çankiri-Çorum Basins,Central Anatolia,Turkey

The Southeast Anatolian orogen is a part of the eastern Mediterranean-Himalayan orogenic belt. Development of the Southeast Anatolian orogen began with the first ophiolite obduction onto the Arabian platform during the Late Cretaceous, and it continued until the Miocene. Its lingering effects continue to be discernible at present. During the Late Cretaceous-Miocene interval, three major deformational phases occurred, related to Late Cretaceous, Eocene, and Miocene nappe emplacements. The Miocene nappes are composed of ophiolites and metamorphic massifs.

For a decade, field studies in the region have shown that strike-slip tectonics played a role complementary to the major horizontal effects of the nappe movement, as indicated by: (1) fault systems active during the Eocene; (2) different Eocene rock units composed of coeval continental and deep-sea deposits and presently tectonically juxtaposed; and (3) other stratigraphic and structural data obtained across the present strike-slip fault zones.

These strike-slip faults possibly resulted from oblique subduction of the mid-oceanic ridge underneath the northerly situated Yuksekova ensimatic island-arc complex, causing a gradual cessation of the island-arc system. The subduction also led to the development of a back-arc pull-apart basin, i.e., the Maden basin, which opened on the upper plate. The geologic history in Southeast Anatolia resembles the development of the San Andreas fault system and subsequent tectonic evolution.     

Evidence of late oligocene/early miocene backthrusting in the central alpine “root zone”

Abstract

Two groups of stretching lineations can be distinguished in the Central Alpine " root zone " between Ticino and Mera :

1) Steeply plunging lineations formed during retrograde metamor-Phism under amphibolite/greenschist facies conditions indicate an uplift movement of the Central Alps. The lineations can be related to an important back-thrusting event of late Oligocene/early Miocene age.

2) Gently plunging lineations formed under lower greenschist facies conditions display a pattern typical of a dextral strike-slip system. These lineations are of early Miocene age.

This cpmbined movement, achieved by ductile deformation along the lnsubric line was followed by a stage of brittle deformation in a dextral strike-slip system (= Tonale line).

The signification of this interpretation is shown in a new crustal cross section through the Central Alpine/Southern Alpine border zone in the Iicino area.     

Discussion of tectonic models for Cenozoic strike-slip fault-affected continental margins of mainland SE Asia

Understanding the roles of Cenozoic strike-slip faults in SE Asia observed in outcrop onshore, with their offshore continuation has produced a variety of structural models (particularly pull-apart vs. oblique extension, escape tectonics vs. slab-pull-driven extension) to explain their relationships to sedimentary basins. Key problems with interpreting the offshore significance of major strike-slip faults are: (1) reconciling conflicting palaeomagnetic data, (2) discriminating extensional, and oblique-extensional fault geometries from strike-slip geometries on 2D seismic reflection data, and (3) estimating strike-slip displacements from seismic reflection data.Focus on basic strike-slip fault geometries such as restraining vs. releasing bends, and strongly splaying geometries approach the gulfs of Thailand and Tonkin, suggest major strike-slip faults probably do not extend far offshore Splays covering areas 10,000’s km² in extent are characteristic of the southern portions of the Sagaing, Mae Ping, Three Pagodas and Ailao Shan-Red River faults, and are indicative of major faults dying out. The areas of the fault tips associated with faults of potentially 100 km+ displacement, scale appropriately with global examples of strike-slip faults on log–log displacement vs. tip area plots. The fault geometries in the Song Hong-Yinggehai Basin are inappropriate for a sinistral pull-apart geometry, and instead the southern fault strands of the Ailao Shan-Red River fault are interpreted to die out within the NW part of the Song Hong-Yinggehai Basin. Hence the fault zone does not transfer displacement onto the South China Seas spreading centre. The strike-slip faults are replaced by more extensional, oblique-extensional fault systems offshore to the south. The Sagaing Fault is also superimposed on an older Paleogene–Early Miocene oblique-extensional rift system. The Sagaing Fault geometry is complex, and one branch of the offshore fault zone transfers displacement onto the Pliocene-Recent Andaman spreading centre, and links with the West Andaman and related faults to form a very large pull-apart basin.     

Neotectonics of East Anatolian Plateau (Turkey) and Lesser Caucasus: implication for transition from thrusting to strike-slip faulting

Abstract

The east Anatolian plateau and the Lesser Caucasus are characterised and shaped by three major structures: (1) NW- and NE-trending dextral to sinistral active strike-slip faults, (2) N-S to NNW-trending fissures and /or Plio-Quatemary volcanoes, and (3) a 5-km thick, undeformed Plio-Quatemary continental volcanosedimentary sequence accumulated in various strike-slip basins. In contrast to the situation in the east Anatolian plateau and the Lesser Caucasus, the Transcaucasus and the Great Caucasus are characterised by WNW-trending active thrust to reverse faults, folds, and 6-km thick, undeformed (except for the fault-bounded basin margins) continuous Oligocene-Quaternary molassic sequence accumulated in actively developing ramp basins. Hence, the neotectonic regime in the Great Caucasus and the Transcaucasus is compressional-contractional, and Oligocene-Quaternary in age; whereas it is compressional-extensional, and Plio-Quatemary in age in the east Anatolian plateau and the Lesser Caucasus.

Middle and Upper Miocene volcano-sedimentary sequences are folded and thrust-to-reverse-faulted as a result of compressional- contractional tectonic regime accompanied by mostly calc-alkaline volcanic activity, whereas Middle Pliocene-Quaternary sequences, which rest with angular unconformity on the pre-Middle Pliocene rocks, are nearly flat-lying and dominated by strike-slip faulting accompanied by mostly alkali volcanic activity implying an inversion in tectonic regime. The strike-slip faults cut and displace dykes, reverse to thrust faults and fold axes of Late Miocene age up to maximum 7 km: hence these faults are younger than Late Miocene, i.e., these formed after Late Miocene. Therefore, the time period between late Serravalian (~ 12 Ma) continent-continent collision of Arabian and Eurasian plates and the late Early Pliocene inversion in both the tectonic regime, basin type and deformation pattern (from folding and thrusting to strike-slip faulting) is here termed as the Transitional period.

Orientation patterns of various neotectonic structures and focal mechanism solutions of recent earthquakes that occurred in the east Anatolian plateau and the Caucasus fit well with the N-S directed intracontinental convergence between the Arabian plate in the south and the Eurasian plate in the north lasting since Late Miocene or Early Pliocene in places. © 2001 Éditions scientifiques et médicales Elsevier SAS     

The lithospheric geodynamics of plate boundary transpression in New Zealand: Initiating and emplacing subduction along the Hikurangi margin, and the tectonic evolution of the Alpine Fault system

In contrast to the normal ‘Wilson cycle’ sequence of subduction leading to continental collision and associated mountain building, the evolution of the New Zealand plate boundary in the Neogene reflects the converse—initially a period of continental convergence that is followed by the emplacement of subduction. Plate reconstructions allow us to place limits on the location and timing of the continental convergence and subduction zones and the migration of the transition between the two plate boundary regimes. Relative plate motions and reconstructions since the Early to Mid-Miocene require significant continental convergence in advance of the emplacement of the southward migrating Hikurangi subduction—a sequence of tectonism seen in the present plate boundary geography of Hikurangi subduction beneath North Island and convergence in the Southern Alps along the Alpine Fault. In contrast to a transition from subduction to continental convergence where the leading edge of the upper plate is relatively thin and deformable, the transition from a continental convergent regime, with its associated crustal and lithospheric thickening, to subduction of oceanic lithosphere requires substantial thinning (removal) of upper plate continental lithosphere to make room for the slab. The simple structure of the Wadati–Benioff zone seen in the present-day geometry of the subducting Pacific plate beneath North Island indicates that this lithospheric adjustment occurs quickly. Associated with this rapid lithospheric thinning is the development of a series of ephemeral basins, younging to the south, that straddle the migrating slab edge. Based on this association between localized vertical tectonics and slab emplacement, the tectonic history of these basins records the effects of lithospheric delamination driven by the southward migrating leading edge of the subducting Pacific slab. Although the New Zealand plate boundary is often described as simply two subduction zones linked by the transpressive Alpine Fault, in actuality the present is merely a snapshot view of an ongoing and complex evolution from convergence to subduction.     

新生代阿尔金断裂带的演化:来自沿线盆地沉积记录的启示SCIEI北大核心CSCD

阿尔金断裂带是青藏高原自印度与欧亚大陆碰撞后向北扩展的前缘断裂,其新生代活动性对于研究青藏高原隆升与扩展过程和机制具有重要意义。近些年,运用热年代学、断裂几何学和运动学、沉积学、磁性地层学和地震学等方法对阿尔金断裂带的性质、组成结构、断裂活动时代、走滑断裂运动特征、走滑位移量和走滑速率等进行了细致的研究,而对阿尔金断裂带沿线受其控制的新生代沉积盆地的地层年代、沉积演化特征虽然也有一定研究,但往往仅限于单个盆地,缺乏对沿线盆地整体的对比认识,造成对阿尔金断裂带走滑起始时间及阿尔金山的隆升历史存在不同的认识。本文对近二十年来阿尔金断裂带沿线新生代沉积盆地的磁性地层年代与沉积相演化的研究进展进行综述,建立阿尔金断裂带沿线盆地新生代沉积序列和年代框架;辅助热年代学等资料,提出阿尔金断裂带的三阶段演化模型:始新世-中中新世,阿尔金断裂带以大幅度的走滑运动为主,同时伴随着阿尔金山小范围的隆升;中中新世开始,阿尔金山开始大规模的隆升,伴随着较少量的走滑运动;晚中新世以来,阿尔金断裂带构造活动加强。     

A tectonic model for the Tertiary evolution of strike–slip faults and rift basins in SE Asia

Models for the Tertiary evolution of SE Asia fall into two main types: a pure escape tectonics model with no proto-South China Sea, and subduction of proto-South China Sea oceanic crust beneath Borneo. A related problem is which, if any, of the main strike–slip faults (Mae Ping, Three Pagodas and Aliao Shan–Red River (ASRR)) cross Sundaland to the NW Borneo margin to facilitate continental extrusion? Recent results investigating strike–slip faults, rift basins, and metamorphic core complexes are reviewed and a revised tectonic model for SE Asia proposed. Key points of the new model include: (1) The ASRR shear zone was mainly active in the Eocene–Oligocene in order to link with extension in the South China Sea. The ASRR was less active during the Miocene (tens of kilometres of sinistral displacement), with minor amounts of South China Sea spreading centre extension transferred to the ASRR shear zone. (2) At least three important regions of metamorphic core complex development affected Indochina from the Oligocene–Miocene (Mogok gneiss belt; Doi Inthanon and Doi Suthep; around the ASRR shear zone). Hence, Paleogene crustal thickening, buoyancy-driven crustal collapse, and lower crustal flow are important elements of the Tertiary evolution of Indochina. (3) Subduction of a proto-South China Sea oceanic crust during the Eocene–Early Miocene is necessary to explain the geological evolution of NW Borneo and must be built into any model for the region. (4) The Eocene–Oligocene collision of NE India with Burma activated extrusion tectonics along the Three Pagodas, Mae Ping, Ranong and Klong Marui faults and right lateral motion along the Sumatran subduction zone. (5) The only strike–slip fault link to the NW Borneo margin occurred along the trend of the ASRR fault system, which passes along strike into a right lateral transform system including the Baram line.     

Crustal-scale extension in a convergent orogen : the Sterzing-Steinach mylomte zone in the Eastern Alps

Abstract

The western margin of the Tauera Window (Eastern Alps) is defined by a low angle westward dipping fault zone of potently We disp lacement. Ductile deformation of the fault rocks results in a carpet of mylonites up to 400 metres thick. Evidence from shear criteria and the excision of part of the Cretaceous-Tertiary metamorphic edifice both indicate normal displacements, and relative movement of Austroalpine nappe complex towards the west. The Sterzing-Steinach mylonite zone overprints the Alpine nappe edifice. Movements occurred on the cooling path of the Tauern metamorphism, and may be as recent as Middle Miocene.

The Kinematics and geometry of the mylonite zone constrain two likely t ectonic explanations that are both compatible with secondary thining of a thick orogenic wedge. (1) Ute the Austroalpine nappe pile due to tectonic unroofing of the Tauern window. (2) Continental escape by east-west stretching of the Alpine orogenic wedge in response to continental collision.     

Example of Neogene tectonic indentation in the Eastern Betic Cordilleras: the Arc of Aguilas (Southeastern Spain)

Abstract

Neogene deformations have deeply disturbed the initial architecture of the pile of nappes within the Eastern Betic zone. The Arc of Aguilas, displaying a southeast-facing concavity, is a spectacular example of such a post-nappe structuration. Miocene deposits involved in the torsion of the Arc provide a chronology of the deformation. The Arc of Aguilas is one element within a system of rigid-plastic indentation including the following units, from the inner (SE) to the outer (NW) zones : — A rigid block, little deformed, located in the present day abyssal plain, play the part of the indenter.

— A structural pad corresponding to the Aguilas Arc itself. It was severely folded during Miocene times.

— A large peripheral zone mainly subjected to faulting during the Neogene (essentially strike-slip faults). These faults control the evolution of different types of sedimentary basins during the Late Neogene (Tortonian to Pliocene).

Two large shear zones: N020 sinistral (Palomares and Terreros faults), N100 dextral (Las Moreras faults) guided the deformation of the Aguilas Arc within a compressive stressfield of which major tensor axis oscillated between NW-SE and N-S.     

郯庐断裂带山东段的中新生代构造演化特征

本文在总结郯庐断裂带的最新研究成果的基础上,对郯庐断裂带山东段深部构造特征、运动学特征和内部结构特征进行了分析,并对郯庐断裂带山东段的中新生代构造演化过程进行了研究。在华南华北碰撞造山时期,郯庐断裂带山东段发生了显著的左旋走滑剪切变形。郯庐断裂带山东段在晚侏罗至早始新世(50Ma前)的左旋走滑直接受控于古太平洋板块向东亚大陆的俯冲,板块俯冲边界的应力直接传递到郯庐断裂带导致其发生走滑运动;早白垩世中期至古近纪,郯庐断裂带山东段内部及两侧盆地的伸展则受控于深部岩石圈减薄、地幔底辟导致的裂陷作用。     

郯庐断裂带的平移运动与成因

在华北、华南板块碰撞期间，郯庐断裂带究竟是何种边界仍是没有解决的重大地学问题，许多学者对此提出了不同的构造解释模式。关于郯庐断裂的平移距离仍存在着较大的分歧与有待深入研究之处。在华北、华南板块拼合之后，郯庐断裂带发生了一次大规模的左行平移，其糜棱岩的^40Ar／^39Ar年龄为132～119Ma，指示为早白垩世的平移活动，平移活动中伴生了强烈的岩浆活动。这期左行平移标志着中国东部构造的重大转折，是滨太平洋构造对前期古特提斯构造的叠加，其动力学机制为太平洋区伊侨奈岐板块突然出现的高速斜向俯冲。     

Neotectonic evolution of the northwestward arched segment of the Central Anatolian Fault Zone,Central Anatolia,Turkey

Abstract

Central Anatolia has undergone complex Neotectonic deformation since Late Miocene-Pliocene times. Many faults and intracontinental basins in this region were either formed, or have been reactivated, during this period. The eastern part of central Anatolia is dominated by a NE-SW-trending, left lateral transcurrent structure named the Central Anatolian fault zone located between Sivas in the northeast and west of Mersin in the southwest. Around the central part, it is characterized by transtensional depressions formed by left stepping and southward bending of the fault zone. Pre-Upper Miocene basement rocks of the region consist of the central Anatolian crystalline complex and a sedimentary cover of Tertiary age. These rock units were strongly deformed by N-S con- vergence. The entire area emerged to become the site of erosion and formed a vast plateau before the Late Miocene. A NE-SW- trending extensional basin developed on this plateau in Late Miocene-Early Pliocene times. Rock units of this basin are characterized by a thick succession of pyroclastic rocks intercalated with calcalkaline-alkaline volcanics. The volcanic sequence is uncon- formably overlain by Pliocene lacustrine-fluviatile deposits interrelated with ignimbrites and tuffs. Thick, coarse grained alluvial/colluvial fan deposits of marginal facies and fine grained elastics and carbonates of central facies display characteristic synsedimentary structures with volcanic intercalations. These are the main lines of evidence for development of a new transtensional H?rka— k?zd?rmak basin in Pliocene times. Reactivation of the main segment of the Central Anatolian fault zone has triggered development of depressions around the left stepping and southward bending of the central part of this sinistral fault zone in the ignimbritic plateau during Late Pliocene-Quaternary time. These transtensional basins are named the Tuzla Gölü and Sultansazl??? pull-apart basins. The Sultansazl??? basin has a lazy S to rhomboidal shape and displays characteristic morphologic features including a steep and stepped western margin, large alluvial and colluvial fans, and a huge composite volcano (the Erciyes Da??).

The geometry of faulting and formation of pull-apart basins can be explained within the framework of tectonic escape of the wedgelike Anatolian block, bounded by sinistral East Anatolian fault zone and dextral North Anatolian transform fault zone. This escape may have been accomplished as lateral continental extrusion of the Anatolian Plate caused by final collision of the Arabian Plate with the Eurasian Plate. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

Gondwana breakup via double-saloon-door rifting and seafloor spreading in a backarc basin during subduction rollback

A model has been developed where two arc-parallel rifts propagate in opposite directions from an initial central location during backarc seafloor spreading and subduction rollback. The resultant geometry causes pairs of terranes to simultaneously rotate clockwise and counterclockwise like the motion of double-saloon-doors about their hinges. As movement proceeds and the two terranes rotate, a gap begins to extend between them, where a third rift initiates and propagates in the opposite direction to subduction rollback. Observations from the Oligocene to Recent Western Mediterranean, the Miocene to Recent Carpathians, the Miocene to Recent Aegean and the Oligocene to Recent Caribbean point to a two-stage process. Initially, pairs of terranes comprising a pre-existing retro-arc fold thrust belt and magmatic arc rotate about poles and accrete to adjacent continents. Terrane docking reduces the width of the subduction zone, leading to a second phase during which subduction to strike-slip transitions initiate. The clockwise rotated terrane is caught up in a dextral strike-slip zone, whereas the counterclockwise rotated terrane is entrained in a sinistral strike-slip fault system. The likely driving force is a pair of rotational torques caused by slab sinking and rollback of a curved subduction hingeline.By analogy with the above model, a revised five-stage Early Jurassic to Early Cretaceous Gondwana dispersal model is proposed in which three plates always separate about a single triple rift or triple junction in the Weddell Sea area. Seven features are considered diagnostic of double-saloon-door rifting and seafloor spreading:

i) earliest movement involves clockwise and counterclockwise rotations of the Falkland Islands Block and the Ellsworth Whitmore Terrane respectively;

ii) terranes comprise areas of a pre-existing retro-arc fold thrust belt (the Permo-Triassic Gondwanide Orogeny) attached to an accretionary wedge/magmatic arc; the Falklands Islands Block is initially attached to Southern Patagonia/West Antarctic Peninsula, while the Ellsworth Whitmore Terrane is combined with the Thurston Island Block;

iii) paleogeographies demonstrate rifting and extension in a backarc environment relative to a Pacific margin subduction zone/accretionary wedge where simultaneous crustal shortening occurs;

iv) a ridge jump towards the subduction zone from east of the Falkland Islands to the Rocas Verdes Basin evinces subduction rollback;

v) this ridge jump combined with backarc extension isolated an area of thicker continental crust — The Falkland Islands Block;

vi) well-documented EW oriented seafloor spreading anomalies in the Weddell Sea are perpendicular to the subduction zone and propagate in the opposite direction to rollback;

vii) the dextral strike-slip Gastre and sub-parallel faults form one boundary of the Gondwana subduction rollback, whereas the other boundary may be formed by inferred sinistral strike-slip motion between a combined Thurston Island/Ellsworth Whitmore Terrane and Marie Byrd Land/East Antarctica.

郯庐断裂带早白垩世走滑运动中的构造、岩浆、沉积事件

郯庐断裂带内一系列走滑糜棱岩类的^40Ar/^39Ar测年表明，郯庐断裂早白垩世发生了左旋走滑运动。这一大规模的走滑运动，造成了两类走滑构造，一类为变质岩中低绿片岩相左旋韧性剪切带，另一类为中生代火成岩、沉积岩中的脆性、脆-韧性左行平移断层。这反映断裂带的走滑运动从早白垩世初期持续到早白垩世后期。断裂带的走滑运动诱发大规模的、以富钾、中酸性为主的岩浆活动。地球化学分析显示，这些岩浆岩既有壳源的信息，也有幔源的贡献，反映是断裂减压、壳-幔相互作用下形成的岩浆活动，也暗示断裂带在走滑期切入壳-幔边界。该断裂带走滑运动中，除了在莱阳盆地形成了拉分盆地外，还在合肥盆地东部造成了走滑挠曲盆地，控制下白垩统朱巷组的沉积，郯庐断裂带早白垩世走滑运动中的构造、岩浆、沉积事件，是西太平洋伊泽纳崎板块高速斜向俯冲的结果，属于滨太平洋构造。