Quantification of LST and CO2 levels using Landsat-8 thermal bands on urban environment

Land surface temperature (LST) is an important aspect in global to regional change studies, for control of climate change and balancing of high temperature. Urbanization is one of the influencing factors increasing land surface and atmospheric temperature, by the emission of greenhouse gases (e.g. CO₂, NO and methane). In the present study, LST was derived from Landsat-8 of multitemporal data sets to analyse the spatial structure of the urban thermal environment in relation to the urban surface characteristics and land use–land cover (LULC). LST is influenced by the greenhouse gases i.e. CO₂ plays an important role in increasing the earth’s surface temperature. In order to provide the evidence of influence of CO₂ on LST, the relationship between LST, air temperature and CO₂ was analysed. Landsat-8 satellite has two thermal bands, 10 and 11. These bands were used to accurately to calculate the temperature over the study area. Results showed that the strength of correlation between ground monitoring data and satellite data was high. Based on correlation values of each month April (R² = 0.994), May (R² = 0.297) and June (R² = 0.934), observed results show that band 10 was significantly correlating with air temperature. Relationship between LST and CO₂ levels were obtained from linear regression analysis. band 11 was correlating significantly with CO₂ values in each of the months April (R² = 0.217), May (R² = 0.914) and June, (R² = 0.934), because band 11 is closer to the 15-micron band of CO₂. From the results, it was observed that band 10 can be used for calculating air temperature and band 11 can be used for estimation of greenhouse gases.     

Quantitative Inversion of Vegetation Biochemical Components Based on HJ1-A HSI in Coal Mining Area

This study investigates the applicability of estimating chlorophyll and water content at canopy level through empirical models and band combinations. The main goal is to evaluate and compare the accuracy of these two approaches for estimating and mapping canopy chlorophyll and water content through canopy reflectance and spaceborne HJ1-A HSI data acquired over Yanzhou coal mining area. An experiment was carried out. Canopy spectral measurements were acquired in the field using an ASD spectroradiometer along with simultaneous in situ measurements of leaf chlorophyll content. We tested seven variables derived from canopy reflectance for detecting canopy chlorophyll and water content: (1) R, (2) Log(1/R), (3) Log(1/R)′, (4) FDR, (5) SDR, (6) CRR, (7) BD. Stepwise multiple linear regressions were used to select wavelengths from HJ1-A HSI image bands. Correlation analysis was also done between different band combinations and biochemistry. A statistically significant relationship between Log(1/R) and chlorophyll was found at canopy level (R² = 0.516). SDR had the highest correlation with canopy water content (R² = 0.490). In addition, relationship between normalized different band combinations and chlorophyll and water content is also significantly obvious (R² = 0.577 and R² = 0.615). Canopy chlorophyll content was estimated with the intermediate accuracy (R² = 0.4144), while water content was estimated with an acceptable accuracy (R² = 0.4592). Canopy chlorophyll and water content spatial distribution were mapped. Chlorophyll and water stress levels were quantified by comparing different environmental stressors.     

Testing utility of Landsat 8 for remote assessment of water quality in two subtropical African reservoirs with contrasting trophic states

Water quality problems continue on a global scale and this creates the need for regular monitoring using cheaper technologies to inform management. The objective of this study was to test for significant relationships between the field-measured and Landsat 8 OLI sensor-retrieved water quality parameters. The study was carried out in two reservoirs with contrasting trophic states in Zimbabwe. Results show that the Blue/Red ratio had strong predictive relationships with Secchi disc transparency (R² > 0.70) and turbidity (R² ≥ 0.65). The Near-infrared/Red ratio was a strong predictor of chlorophyll-a in Mazvikadei (R² > 0.84) whereas in Lake Chivero, which is more polluted, the red band was the most useful predictor (R² = 0.69). Overall, our work demonstrates the utility of using Landsat 8 band ratios for remote assessment of water quality in African reservoirs as a value-addition to the traditional field-based methods, which are expensive resulting in data scarcity.     

Retrieval of CDOM and DOC Using In Situ Hyperspectral Data: A Case Study for Potable Waters in Northeast China

Chromophoric dissolved organic matter (CDOM), the light absorbing fraction of dissolved organic carbon (DOC), together with phytoplankton and total suspended matter are the main optically active components could be retrieved by remote sensing data. Generally, different composition of DOC and CDOM corresponds to different water surface reflectance. Absorption properties of CDOM and retrieval models for CDOM and DOC were investigated with data from potable reservoirs located in the central of Jilin Province. Water sampling field surveys were conducted on 15, 16 and 19 of September 2012 across the Shitoukoumen, Erlonghu and Xilicheng reservoirs, respectively. Both empirical regression (single band model and band ratio model) and partial least squares coupled with back-propagation artificial neural models (PLSBPNN) were established to estimate CDOM absorption coefficient at 355 nm [a_CDOM(355)] and DOC concentration with in situ measured remote sensing reflectance. It was found that the band ratio models and PLSBPNN model performed well for estimating DOC concentration while the band ratio models yielded the best result in retrieval CDOM. Moreover, all the three models performed better on the DOC concentration estimation than the performance on a_CDOM(355). Band ratio models outperformed (R ² ?=?0.55) other models for estimating CDOM absorption coefficient, while PLSBPNN model outperformed other models with respect to DOC estimation (R ² ?=?0.93). High spectral slope values indicated that CDOM in the potable waters primarily comprised low molecular weight organic substances; while sources of DOC were mainly coming from exogenous input, which was the main reason lead to the difference of model performances on DOC and a_CDOM(355) estimation. The algorithms developed in this study is needed to be tested and refined with more in situ spectral data, also future work is still needed to be undertaken for characterizing the dynamic of the potable water quality with remotely sensed imagery.     

Fractional vegetation cover estimation based on soil and vegetation lines in a corn-dominated area

An automatic fractional vegetation cover (FVC) estimation method based on image characteristics in an agricultural region was proposed in this study to remove the empiricism in determining the key parameters of empirical methods. The proposed method automatically determined the soil and vegetation lines in the two-dimensional space of the red and blue band reflectances, which involved an iterative soil and vegetation pixels selection procedure, and then estimated FVC of a pixel based on its distances from the soil and vegetation lines. The accuracy assessment using field survey data indicated that the performance of the proposed method (R² = 0.69, RMSE = 0.072, Bias = 0.014) was comparable with several commonly used empirical methods. Therefore, it was indicated that the proposed method could effectively estimate FVC in the corn-dominated region.     

Proximal Remote Sensing of Herbicide and Drought Stress in Field Grown Colocasia and Sweet Potato Plants by Sunlight-Induced Chlorophyll Fluorescence Imaging

Chlorophyll fluorescence is an indicator of plant photosynthetic activity and has been used to monitor the health status of vegetation. Several studies have exploited the application of red/far-red chlorophyll fluorescence ratio in detecting the impact of various types of stresses in plants. Recently, sunlight-induced chlorophyll fluorescence imaging has been used to detect and discriminate different stages of mosaic virus infection in potted cassava plants with a multi-spectral imaging system (MSIS). In this study, the MSIS is used to investigate the impact of drought and herbicide stress in field grown crop plants. Towards this control and treatment groups of colocasia and sweet potato plants were grown in laterite soil beds and the reflectance images of these crop plants were recorded up to 14-days of treatment at the Fraunhofer lines of O₂ B at 687 nm and O₂ A at 759.5 nm and the off-lines at 684 and 757.5 nm. The recorded images were analyzed using the Fraunhofer Line Discrimination technique to extract the sunlight-induced chlorophyll fluorescence component from the reflectance images of the plant leaves. As compared to the control group, the chlorophyll fluorescence image ratio (F ₆₈₇/F ₇₆₀) in the treatment groups of both the plant varieties shows an increasing trend with increase in the extent of stress. Further, the F ₆₈₇/F ₇₆₀ ratio was found to correlate with the net photosynthetic rate (Pn) and stomatal conductance (g_s) of leaves. The correlation coefficient (R ²) for the relationship of F ₆₈₇/F ₇₆₀ ratio with Pn were found to be 0.78, 0.79 and 0.78, respectively for the control, herbicide treated and drought treated colocasia plants, while these were 0.77, 0.86 and 0.88, respectively for sweet potato plants. The results presented show the potential of proximal remote sensing and the application F ₆₈₇/F ₇₆₀ fluorescence image ratio for effective monitoring of stress-induced changes in field grown plants.     

Use of cartographic images by expert and novice field geologists in planning fieldwork routes

Topographic maps and aerial photographs are particularly useful when geoscientists are faced with fieldwork tasks such as selecting paths for observation, establishing sampling schemes, or defining field regions. These types of images are crucial in bedrock geologic mapping, a cognitively complex field-based problem-solving task. Geologic mapping requires the geologist to correctly identify rock types and three-dimensional bedrock structures from often partial or poor-quality outcrop data while navigating through unfamiliar terrain. This paper compares the walked routes of novice to expert geologists working in the field (n = 66) with the results of a route planning and navigation survey of a similar population of geologists (n = 77). Results show clearly that those geologists with previous mapping experience make quick and decisive determinations about field areas from available imagery and maps, regardless of whether they are or not physically present in the field area. Recognition of geologic features enabled experts to form and verbalize a specific plan for travel through a landscape based on those features. Novices were less likely to develop specific travel route plans and were less likely to identify critical landscape cues from aerial photographs.     

Multiple statistical approaches for the discrimination of mangrove species of Rhizophoraceae using transformed field and laboratory hyperspectral data

This study aims at discriminating eight mangrove species of Rhizophoraceae family of Indian east coast using field and laboratory spectra in spectral range (350–2500 nm). Parametric and non-parametric statistical analyses were applied on spectral data in four spectral modes: (i) reflectance (ii) continuum removed, (iii) additive inverse and (iv) continuum removed additive inverse. We introduced continuum removal of inverse spectra to utilize the advantage of continuum removal in reflectance region. Non-parametric test gave better separability than parametric test. Principal component analysis and stepwise discriminant analysis were applied for feature reduction and to identify optimal wavelengths for species discrimination. To quantify the separability, Jeffries–Matusita distance measure was derived. Green (550 nm), red edge (680–720 nm) and water absorption region (1470 and 1850 nm) were found to be optimal wavelengths for species discrimination. The continuum removal of additive inverse spectra gave better separability than the continuum removed spectra.     

Retrieval of chlorophyll and nitrogen in Norway spruce (Picea abies L. Karst.) using imaging spectroscopy

The research evaluated the information content of spectral reflectance (laboratory and airborne data) for the estimation of needle chlorophyll (C_AB) and nitrogen (C_N) concentration in Norway spruce (Picea abies L. Karst.) needles. To identify reliable predictive models different types of spectral transformations were systematically compared regarding the accuracy of prediction. The results of the cross-validated analysis showed that C_AB can be well estimated from laboratory and canopy reflectance data. The best predictive model to estimate C_AB was achieved from laboratory spectra using continuum-removal transformed data (R²cv = 0.83 and a relative RMSEcv of 8.1%, n = 78) and from hyperspectral HyMap data using band-depth normalised spectra (R²cv = 0.90, relative RMSEcv = 2.8%, n = 13). Concerning the nitrogen concentration, we observed somewhat weaker relations, with however still acceptable accuracies (at canopy level: R²cv = 0.57, relative RMSEcv = 4.6%). The wavebands selected in the regression models to estimate C_AB were typically located in the red edge region and near the green reflectance peak. For C_N, additional wavebands related to a known protein absorption feature at 2350 nm were selected. The portion of selected wavebands attributable to known absorption features strongly depends on the type of spectral transformation applied. A method called “water removal” (WR) produced for canopy spectra the largest percentage of wavebands directly or indirectly related to known absorption features. The derived chlorophyll and nitrogen maps may support the detection and the monitoring of environmental stressors and are also important inputs to many bio-geochemical process models.     

Remote sensing of nutrients in a subtropical African reservoir: testing utility of Landsat 8

Remote sensing is useful for water quality assessments but current remote sensing applications favour parameters that are easy to detect such as chlorophyll-a. An assessment of the utility of Landsat 8 for detecting nutrients was conducted in Mazvikadei reservoir in Zimbabwe. The main objective was to determine whether nutrients often overlooked by remote sensing and yet are the main determinants of water quality can be remotely sensed. Sampling targeted ammonia, nitrates and reactive phosphorus from May to October 2015. In situ nutrient concentrations were regressed against reflectance derived from Landsat 8 imagery. Strong negative relationships were found between ammonia and the near-infrared band in July (R² = 0.80, p < 0.05) as well as between nitrates and the blue band (R² = 0.67, p < 0.05) in June. Overall, the results suggest that the cool dry season is the optimum time to use Landsat 8 for monitoring nutrients in tropical lakes.     

Retrieval of boreal forest LAI using a forest reflectance model and empirical regressions

Spectral invariants provide a novel approach for characterizing canopy structure in forest reflectance models and for mapping biophysical variables using satellite images. We applied a photon recollision probability (p) based forest reflectance model (PARAS) to retrieve leaf area index (LAI) from fine resolution SPOT HRVIR and Landsat ETM+ satellite data. First, PARAS was parameterized using an extensive database of LAI-2000 measurements from five conifer-dominated boreal forest sites in Finland, and mixtures of field-measured forest understory spectra. The selected vegetation indices (e.g. reduced simple ratio, RSR), neural networks and kNN method were used to retrieve effective LAI (L_e) based on reflectance model simulations. For comparison, we established empirical vegetation index-LAI regression models for our study sites. The empirical RSR–L_e regression performed best when applied to an independent test site in southern Finland [RMSE 0.57 (24.2%)]. However, the difference to the best reflectance model based retrievals produced by neural networks was only marginal [RMSE 0.59 (25.1%)]. According to this study, the PARAS model provides a simple and flexible modelling tool for calibrating algorithms for LAI retrieval in conifer-dominated boreal forests. The advantage of PARAS is that it directly uses field measurements to parameterize canopy structure (LAI-2000, hemispherical photographs) and optical properties of foliage and understory.     

Determining oil slick thickness using hyperspectral remote sensing in the Bohai Sea of China

Abstract

Determining oil slick thickness plays an important role in assessing oil spill volume and its environmental impacts on the ocean. In this study, we used a Hyperion image of an oil spill accident area and seawater and fresh crude oil samples collected in the Bohai Sea of China. A well-controlled laboratory experiment was designed to simulate spectral responses to different oil slick thicknesses. Spectral resampling and normalization methods were used to reduce the differences in spectral reflectances between the experimental background seawater sample and real background seawater. Fitting the analysis with laboratory experimental data results showed a linear relationship between normalized oil slick reflectance and normalized oil slick thickness [20th band (R ²=0.92938, n=49, p<0.01), 26th band (R ²=0.93806, n=49, p<0.01), 29th band (R ²=0.93288, n=49, p<0.01)]. By using these statistical models, we successfully determined the normalized oil slick thickness with the Hyperion image. Our results indicate that hyperspectral remote sensing technology is an effective method to monitor oil spills on water. The spectral ranges of visible green and red light were the optimal bands for estimating oil slick thickness in case 2 water. The high, stabilized spectral reflectance of background seawater will be helpful in oil slick thickness inversion.     

Leaf to canopy upscaling approach affects the estimation of canopy traits

In remote sensing applications, leaf traits are often upscaled to canopy level using sunlit leaf samples collected from the upper canopy. The implicit assumption is that the top of canopy foliage material dominates canopy reflectance and the variability in leaf traits across the canopy is very small. However, the effect of different approaches of upscaling leaf traits to canopy level on model performance and estimation accuracy remains poorly understood. This is especially important in short or sparse canopies where foliage material from the lower canopy potentially contributes to the canopy reflectance. The principal aim of this study is to examine the effect of different approaches when upscaling leaf traits to canopy level on model performance and estimation accuracy using spectral measurements (in-situ canopy hyperspectral and simulated Sentinel-2 data) in short woody vegetation. To achieve this, we measured foliar nitrogen (N), leaf mass per area (LMA), foliar chlorophyll and carbon together with leaf area index (LAI) at three vertical canopy layers (lower, middle and upper) along the plant stem in a controlled laboratory environment. We then upscaled the leaf traits to canopy level by multiplying leaf traits by LAI based on different combinations of the three canopy layers. Concurrently, in-situ canopy reflectance was measured using an ASD FieldSpec-3 Pro FR spectrometer, and the canopy traits were related to in-situ spectral measurements using partial least square regression (PLSR). The PLSR models were cross-validated based on repeated k-fold, and the normalized root mean square errors (nRMSE_cv) obtained from each upscaling approach were compared using one-way analysis of variance (ANOVA) followed by Tukey’s post hoc test. Results of the study showed that leaf-to-canopy upscaling approaches that consider the contribution of leaf traits from the exposed upper canopy layer together with the shaded middle canopy layer yield significantly (p < 0.05) lower error (nRMSE_cv < 0.2 for canopy N, LMA and carbon) as well as high explained variance (R² > 0.71) for both in-situ hyperspectral and simulated Sentinel-2 data. The widely-used upscaling approach that considers only leaf traits from the upper illuminated canopy layer yielded a relatively high error (nRMSE_cv>0.2) and lower explained variance (R² < 0.71) for canopy N, LMA and carbon. In contrast, canopy chlorophyll upscaled based on leaf samples collected from the upper canopy and total canopy LAI exhibited a more accurate relationship with spectral measurements compared with other upscaling approaches. Results of this study demonstrate that leaf to canopy upscaling approaches have a profound effect on canopy traits estimation for both in-situ hyperspectral measurements and simulated Sentinel-2 data in short woody vegetation. These findings have implications for field sampling protocols of leaf traits measurement as well as upscaling leaf traits to canopy level especially in short and less foliated vegetation where leaves from the lower canopy contribute to the canopy reflectance.     

Application of Aqua MODIS sensor data for estimating chlorophyll a in the turbid Case 2 waters of Lake Erie using bio-optical models

There is considerable interest in accurately estimating water quality parameters in turbid (Case 2) and eutrophic waters such as the Western Basin of Lake Erie (WBLE). Lake Erie is a large, open freshwater body that supports diverse ecosystem, and over 12 million people in the mid-western part of the United States depend on it for drinking water, fisheries, navigational, and recreational purposes. The increasing utilization of the freshwater has deteriorated the water severely and currently the lake is experiencing recurring harmful algal blooms (HABs). Improving the water quality of Lake Erie requires the use of robust monitoring tools that help water quality managers understand sources and pathways of influxes that trigger HABs. Satellite-based remote sensing sensor such as the moderate resolution imaging spectroradiometer (MODIS) may provide frequent and synoptic view of the water quality indices. In this study, data set from field measurements was used to evaluate the performance of 14 existing ocean color algorithms. Results indicated that MODIS data consistently underestimated the chlorophyll a concentrations in the WBLE, with the largest source of errors from dissolved organic matter and xanthophyll accessory pigments in this data set. Most of the global algorithms, including OC4v4 and the Baltic model, generated near-identical statistical parameters with an average R² of ~0.57 and RMSE ~2.9 μg/l. MODIS performed poorly (R² ~0.18) when its NIR/red bands were used. A slightly improved model was developed using similar band ratio approach generating R² of ~0.62 and RMSE ~1.8 μg/l.     

Determining iron content in Mediterranean soils in partly vegetated areas,using spectral reflectance and imaging spectroscopy

The possibility of quantifying iron content in the topsoil of the slopes of the El Hacho Mountain complex in Southern Spain using imaging spectroscopy is investigated. Laboratory, field and airborne spectrometer (ROSIS) data are acquired, in combination with soil samples, which are analysed for dithionite extractable iron (Fe_d) content. Analysis of the properties of two iron related absorption features present in laboratory spectra demonstrates good relations, especially between the standard deviation (S.D.) of the values in an absorption feature and the Fe_d content (R² = 0.67) as well as the ratio based Redness Index (R² = 0.51). Such derived relations are less strong for the ROSIS data (R² for S.D. = 0.26 and R² for Redness Index = 0.22). The spatial distribution of iron in vegetated areas shows a strong sensitivity of these relations with the presence of vegetation. A combination of both methods shows that the overestimation of the Fe_d content with the one method is (partly) compensated by the underestimation with the other method.     

Estimating forest standing biomass in savanna woodlands as an indicator of forest productivity using the new generation WorldView-2 sensor

Accurate and up-to-date information on forest dendrometric traits, such as above ground biomass is important in understanding the contribution of terrestrial ecosystems to the regulation of atmsopheric carbon, especially in the face of global environmental change. Besides, dendrometric traits information is critical in assessing the healthy and the spatial planning of fragile ecosystems, such as the savanna dry forests. The aim of this work was to test whether red-edge spectral data derived from WorldView-2 multispectral imagery improve biomass estimation in savanna dry forests. The results of this study have shown that biomass estimation using all Worldview-2 raw spectral bands without the red-edge band yielded low estimation accuracies (R² of 0.67 and a RMSE-CV of 2.2 t ha^?1) when compared to when the red-edge band was included as a co-variate (R² of 0.73 and a RMSE-CV of 2.04 t ha^?1). Also, similar results were obseved when all WorldView-2 vegetation indices (without the red-edge computed ones), producing slightly low accuracies (R² of about 0.67 and a RMSE-CV of 2.20 t ha^?1), when compared to those obtained using all indices and RE-computed indices(R² of 0.76 and a RMSE-CV of 1.88 t ha^?1). Overall, the findings of this work have demontrated the potential and importance of strategically positioned bands, such as the red-edge band in the optimal estimation of indigeonus forest biomass. These results underscores the need to shift towards embracing sensors with unique and strategeically positioned bands, such as the forthcoming Sentinel 2 MSI and HysPIRI which have a global footprint.     

An assessment of gully erosion along major armoured roads in south-eastern region of South Africa: a remote sensing and GIS approach

An assessment of gully erosion along road drainage-release sites is critical for understanding the contribution of roads to soil loss and for informed land management practices. Considering that road-related gully erosion has traditionally been measured using field methods that are expensive, tedious and limited spatially as well as temporally, it is important to identify affordable, timely and robust methods that can be used to effectively map and estimate the volume of gullies along the road networks. In this study, gullies along major roads were identified from remotely sensed data sets and their volumes were estimated in a Geographic Information Systems environment. Also, the biophysical and climatic factors such as vegetation cover, the road contributing surface area, the gradient of the discharge hillslope and rainfall were derived from remotely sensed data sets using Geographic Information Systems techniques to find out whether they could explain the morphology of gullies that existed in this area. The results of this study indicate that hillslope gradient (R²?=?0.69, α = 0.00) and road contributing surface area (R²?=?0.63, α = 0.00) have a strong influence on the volume of gullies along the major roads in the south-eastern region of South Africa, as might have been expected. However, other factors such as vegetation cover (R² = 0.52, α = 0.00) and rainfall (R² = 0.41 and α = 0.58) have a moderately weaker influence on the overall volume of gullies. Overall, the findings of this study highlight the importance of using remote sensing and Geographic Information Systems technologies in investigating gully erosion occurrence along major roads where detailed field work remains a challenge.     

Predicting forest carbon stocks from high resolution satellite data in dry forests of Zimbabwe: exploring the effect of the red-edge band in forest carbon stocks estimation

In this study, we tested whether the inclusion of the red-edge band as a covariate to vegetation indices improves the predictive accuracy in forest carbon estimation and mapping in savanna dry forests of Zimbabwe. Initially, we tested whether and to what extent vegetation indices (simple ratio SR, soil-adjusted vegetation index and normalized difference vegetation index) derived from high spatial resolution satellite imagery (WorldView-2) predict forest carbon stocks. Next, we tested whether inclusion of reflectance in the red-edge band as a covariate to vegetation indices improve the model's accuracy in forest carbon prediction. We used simple regression analysis to determine the nature and the strength of the relationship between forest carbon stocks and remotely sensed vegetation indices. We then used multiple regression analysis to determine whether integrating vegetation indices and reflection in the red-edge band improve forest carbon prediction. Next, we mapped the spatial variation in forest carbon stocks using the best regression model relating forest carbon stocks to remotely sensed vegetation indices and reflection in the red-edge band. Our results showed that vegetation indices alone as an explanatory variable significantly (p < 0.05) predicted forest carbon stocks with R² ranging between 45 and 63% and RMSE ranging from 10.3 to 12.9%. However, when the reflectance in the red-edge band was included in the regression models the explained variance increased to between 68 and 70% with the RMSE ranging between 9.56 and 10.1%. A combination of SR and reflectance in the red edge produced the best predictor of forest carbon stocks. We concluded that integrating vegetation indices and reflectance in the red-edge band derived from high spatial resolution can be successfully used to estimate forest carbon in dry forests with minimal error.     

Estimating spatial variations of total evaporation using multispectral sensors within the uMngeni catchment,South Africa

Total evaporation is of importance in assessing and managing long-term water use, especially in water-limited environments. Therefore, there is need to account for water utilisation by different land uses for well-informed water resources management and future planning. This study investigated the feasibility of using multispectral Landsat 8 and moderate resolution imaging spectroradiometer (MODIS) remote sensing data to estimate total evaporation within the uMngeni catchment in South Africa, using surface energy balance system. The results indicated that Landsat 8 at 30 m resolution has a better spatial representation of total evaporation, when compared to the 1000 m MODIS. Specifically, Landsat 8 yielded significantly different mean total evaporation estimates for all land cover types (one-way ANOVA; F_4.964?=?87.011, p < 0.05), whereas MODIS failed to differentiate (one-way ANOVA; F_2.853?=?0.125, p = 0.998) mean total evaporation estimates for the different land cover types across the catchment. The findings of this study underscore the utility of the Landsat 8 spatial resolution and land cover characteristics in deriving accurate and reliable spatial variations of total evaporation at a catchment scale.     

Relationship of Hyperspectral Reflectance Indices with Leaf N and P Concentration,Dry Matter Accumulation and Grain Yield of Wheat

A field experiment was conducted on wheat during rabi season of year 2010–2011 and 2011–2012 at IARI, New Delhi to study the reflectance response of wheat to the nutrient omissions and identify the appropriate indices for assessing the nutrient deficiencies. Treatments comprised omission of N, P, K, S and Zn, 50% omission of N, P, and K, absolute control and optimum dose of nutrition (150–26.4–50–15–3 kg/ha N–P–K–S–Zn). The R² were significant and higher for the hyperspectral indices than the broad band vegetation indices. GMI-I, RI-2 dB and RI-3d, GNDVI, VOGa, VOGb, VOGc, ND₇₀₅, PRI, PSNDc and REIP had higher R² (>0.61) for the leaf N concentration. The hyperspectral indices having highly significant correlation with leaf P concentration were PSSRc, GMI-1, ZM, RI-half, VOGa, VOGb, VOGc, mSR and REIP. Among the indices analysed PSSRc, GMI-I, VOGa, RI-2 dB, RI-3 dB, GNDVI, VOGb, VOGc and ND₇₀₅ had almost a similar degree of relationship with DM accumulation with R² values ranging from 0.70 to 0.73. However, REIP displayed a higher degree of relationship with leaf N concentration, drymatter accumulation and grain yield as indicated by R² of 0.85, 0.81 and 0.95 (P = ≤0.01), respectively. It can be concluded from the study that among the hyperspectral indices REIP had a highly significant relationship with leaf N concentration, DM accumulation and grain yield. However, for leaf P concentration several hyperspectral indices viz PSSRc, GMI-1, ZM, RI-half, VOGa, VOGb, VOGc, mSR had though significant but almost similar R² values.