Automatic detection of near surface geological and hydrological features and investigating their influence on groundwater accumulation and salinity in southwest Egypt using remote sensing and GIS

This study employs two automated algorithms, the topographic fabric and the deterministic eight-node (D8), to reveal near surface geological fractures and their associated paleodrainages network from a 90?m DEM of the Shuttle Topographic Radar Mission sensor. The topographic fabric algorithm, which calculates the slope and aspect which define a vector normal to the earth’s surface and then compute direction cosines of normal vector at each point, was used to auto-detect fault zones. The deterministic eight-node (D8) algorithm, which determines in which neighbouring pixel any water in a central pixel will flow naturally, was used to delineate paleodrainages concealed beneath sand sheets. Seven sets of geological structures were recognized. Their major trends were found to be in the S46°W, S58°W, S81°W, N107°W, N–S, E–W and N152°W and share similar trends of the revealed paleodrainages. The results suggest a strong spatial relationship between the features extracted from DEM and groundwater potential.     

Mapping and classification of hydrological parameters from digital terrain data in the Musandam Peninsula,UAE and Oman

Groundwater exploration and modelling requires hydrological parameters and a large volume of hydrologic database. This study integrates remote sensing and geographic information system (GIS) to map and classify hydrological parameters indicates areas of groundwater recharge and discharge. Bivariate quadratic surfaces with moving window size of 5 × 5 were fitted to the digital elevation model and drainage basins, drainage network, topographic wetness index (TWI) and hydroforms were derived. The eight-direction algorithm (D8) that determines in which neighbouring pixel any water in a central pixel will flow naturally was used to delineate drainage basin and drainage network in the study area. The TWI was used to quantify the effect of local topography on hydrological processes and for modelling soil moisture. The results indicate the presence of intensive of stream network (1336 km²), wettest zones and accumulation zones (63.99 km²) within Wadi Bih, the UAE and Wadi Khasb, Oman, suggesting regional recharge.     

Combined use of groundwater modeling and potential zone analysis for management of groundwater

A methodology for groundwater evaluation has been developed by the combined use of numerical model and spatial modeling using GIS. The developed methodology has been applied on the sub-basin of the Banganga River, India. Initially, the groundwater potential zones have been delineated by spatial modeling. Different thematic maps of the basin like geology, geomorphology, soil, drainage, slope factor and landuse/landcover have been used to identify the groundwater potential zones. Further, the groundwater flow model for the study area has been developed in the MODFLOW. The groundwater flow vector map has been developed and superimposed on the potential zone map to validate the results of spatial modeling. Finally, the different scenarios have been conceptualized by varying the discharge of the wells and purposing the location for new rainwater harvesting structures. Results reveal that increasing the discharge of the wells in the potential zones put less stress on the aquifer. The suggested locations of rainwater harvesting structures also help to reduce the overall decline of groundwater in the area. The hydrological and spatial modeling presented in this study is highly useful for the evaluation of groundwater resources and for deciding the location of rainwater harvesting structures in semi-arid regions.     

Regional Groundwater Assessment of Krishna River Basin Using Integrated GIS Approach

The groundwater occurrence and movement within the flow systems are governed by many natural factors like topography, geology, geomorphology, lineament structures, soil, drainage network and land use land cover (LULC). Due to complex natural geological/hydro-geological regime a systematic planning is needed for groundwater exploitation. It is even more important to characterize the aquifer system and delineate groundwater potential zones in different geological terrain. The study employed integration of weighted index overlay analysis (WIOA) and geographical information system (GIS) techniques to assess the groundwater potential zones in Krishna river basin, India and the validation of the result with existing groundwater levels. Different thematic layers such as geology, geomorphology, soil, slope, LULC, drainage density, lineament density and annual rainfall distribution were integrated with WIOA using spatial analyst tools in Arc-GIS 10.1. These thematic layers were prepared using Geological survey of India maps, European Digital Archive of Soil Maps, Bhuvan (Indian-Geo platform of ISRO, NRSC) and 30 m global land cover data. Drainage, watershed delineation and slope were prepared from the Shuttle Radar Topography Mission digital elevation model of 30 m resolution data. WIOA is being carried out for deriving the normalized score for the suitability classification. Weight factor is assigned for every thematic layer and their individual feature classes considering their significant importance in groundwater occurrence. The final map of the study area is categorized into five classes very good, good, moderate, poor and very poor groundwater potential zones. The result describes the groundwater potential zones at regional scale which are in good agreement with observed ground water condition at field level. Thus, the results derived can be very much useful in planning and management of groundwater resources in a regional scale.     

Evaluation and Comparison of Multi Resolution DEM Derived Through Cartosat-1 Stereo Pair – A Case Study of Damanganga Basin

The study evaluates and compares Digital Elevation Model (DEM) data of various grid spacing derived using high resolution Cartosat 1 stereo data for hydrologic applications. DEM is essential in modeling different environmental processes which depend on surface elevation. The accuracy of derived DEM varies with grid spacing and source. The CartoDEM is the photogrammetric DEM derived from stereo pairs. Damanganga basin lying in the Western Ghats was analysed using 11 Carto stereo pairs. The process of triangulation resulted in RMSE of 0.42. DEM was extracted at 10 m, 20 m, 30 m, 40 m, 50 m and 90 m grid spacing and compared with ASTER GDEM (30 m) and SRTM DEM (90 m). DEM accuracy was checked with Root Mean Square Error (RMSE) statistic for random points generated in different elevation zones. Extracted stream networks were compared based on Correctness Index and Figure of Merit index, calculated for all the Digital Elevation Models at varying cell sizes. In order to further evaluate the DEM’s, a simple flood simulation with no water movement and no consideration of real time precipitation data was carried out and relationship between heights of flood stage and inundation area for each Digital Elevation Model was also established.     

Urban Built-up Area Assessment of Ranchi Township Using Cartosat-I Stereopairs Satellite Images

In the present study, the Cartosat-I digital elevation model (DEM) was utilized to deduce the vertical characteristics of Ranchi urban area and its relation to long term built-up expansion (1927–2010). The DEM represents moderate variation in terrain relief ranging from 595 m to 754 m with majority of area exhibiting upto 3° of slope and 3° to 6° indicating flat to undulating nature of terrain in Ranchi township. The DEM was used to generate location of sinks within urban area, which are generally delineated along the drainage channels, adjacent to high-rise built-up land and along the elevated road network. The pattern of urban sprawl over the eight decades (1927–2010) were examined with reference to terrain relief zones, which indicated that the built-up growth was mainly taken place over the elevation range of moderate (620–660 m) (67.0%) and high relief (660–680 m) (19.8%) zones. Although earlier preference for built-up development was more in high elevation zones (660–680 m), the low elevation zones (<600–620 m) are now preferred for multistoried built-up land development where better groundwater availability occur. The spatial pattern of vertical growth of built-up land was assessed using contour density obtained from Cartosat-I DEM. The results show that the high density contours predominately correspond to hilly area and high-rise buildings at majority of locations. The urban sprawl pattern and population trend exhibited rapid increase in vertical built-up growth after 1996 indicating beginning of urban densification in Ranchi township.     

Integrated remote sensing and GIS study for hydrogeomorphological mapping and delineation of groundwater potential zones in Khallikote block,Ganjam district,Orissa

The present study attempts to delineate different groundwater potential units using remote sensing and geographic information system (GIS) in Khallikote block of Ganjam disrict, Orissa. Thematic maps of geology, geomorphology, land use and land cover, drainage density, lineament density, slope and DEM (digital elevation model) were prepared using the Landsat Thematic Mapper data in 3 spectral bands, band 7 (mid-infrared light), band 4 (near-infrared light), Band 2 (visible green light). Relationship of each layer to the groundwater regime has been evaluated through detailed analysis of the individual hydrological parameters. The SMCE (Spatial Multi-Criteria Evaluation) module in ILWIS (Integrated Land and Water Information System) supports the decision-making process for evaluating the ground water potential zones in the area. The study shows that more than 70% of the block is covered by medium to excellent category having good ground water potential.     

Comparison of basin morphometry derived from topographic maps,ASTER and SRTM DEMs: an example from Kerala,India

The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform.     

Evaluation of NDWI and MNDWI for assessment of waterlogging by integrating digital elevation model and groundwater level

Accurate information on the extent of waterlogging is required for flood prediction, monitoring, relief and preventive measures. The rule-based classification algorithms were used for differentiating waterlogged areas from other ground features using Resourcesat-2 AWiFS satellite imagery (Indian Remote Sensing Satellite with spatial resolution of 56 m). Two spectral indices normalized difference water index (NDWI) and modified normalized difference water index (MNDWI) were used for extracting waterlogged areas in Sri Muktsar Sahib district of Punjab, India. These indices extracted the waterlogged areas (cropped areas inundated with water) but the water features were less enhanced in the NDWI-derived image (when compared with MNDWI-derived image) due to negative values of NDWI and, mixing of water with built up features. The water features were more enhanced with MNDWI and the values of MNDWI were positive for water features mixed with vegetation. The overall accuracy of waterlogged areas extracted from the MNDWI image was 96.9% with the Kappa coefficient of 0.89. The digital elevation model (DEM) was extracted from ASTER-GDEM. The relationships among depth to the water table recorded before the incessant rain in the region, DEM and classified MNDWI images explained the differences in the extent of waterlogging in various directions of the study area. These results suggest that MNDWI can be used to better delineate water features mixed with vegetation compared to NDWI.     

A Web-based system enabling the integration,analysis, and 3D sub-surface visualization of groundwater monitoring data and geological models

The 3D Water Chemistry Atlas is an intuitive, open source, Web-based system that enables the three-dimensional (3D) sub-surface visualization of ground water monitoring data, overlaid on the local geological model (formation and aquifer strata). This paper firstly describes the results of evaluating existing virtual globe technologies, which led to the decision to use the Cesium open source WebGL Virtual Globe and Map Engine as the underlying platform. Next it describes the backend database and search, filtering, browse and analysis tools that were developed to enable users to interactively explore the groundwater monitoring data and interpret it spatially and temporally relative to the local geological formations and aquifers via the Cesium interface. The result is an integrated 3D visualization system that enables environmental managers and regulators to assess groundwater conditions, identify inconsistencies in the data, manage impacts and risks and make more informed decisions about coal seam gas extraction, waste water extraction, and water reuse.     

Delineation of groundwater potential zones using remote sensing and GIS-based data-driven models

The rapid increase in human population has increased the groundwater resources demand for drinking, agricultural and industrial purposes. The main purpose of this study is to produce groundwater potential map (GPM) using weights-of-evidence (WOE) and evidential belief function (EBF) models based on geographic information system in the Azna Plain, Lorestan Province, Iran. A total number of 370 groundwater wells with discharge more than 10 m³s^?1were considered and out of them, 256 (70%) were randomly selected for training purpose, while the remaining114 (30%) were used for validating the model. In next step, the effective factors on the groundwater potential such as altitude, slope aspect, slope angle, curvature, distance from rivers, drainage density, topographic wetness index, fault distance, fault density, lithology and land use were derived from the spatial geodatabases. Subsequently, the GPM was produced using WOE and EBF models. Finally, the validation of the GPMs was carried out using areas under the ROC curve (AUC). Results showed that the GPM prepared using WOE model has the success rate of 73.62%. Similarly, the AUC plot showed 76.21% prediction accuracy for the EBF model which means both the models performed fairly good predication accuracy. The GPMs are useful sources for planners and engineers in water resource management, land use planning and hazard mitigation purpose.     

Remote Sensing and GIS Approach for Delineation of Groundwater Potential and Groundwater Quality Zones of Western Doon Valley, Uttarakhand, India

Groundwater exploration in the Western Doon valley has been carried out to delineate the groundwater potential and groundwater quality zones suitable for domestic purposes based on the integrated use of Remote Sensing and Geographical Information Systems (GIS). The Western Doon Valley, occupying broad synclinal troughs in the evolving fold-thrust system of sub-Himalaya, which is filled by post-Siwalik fluvial and debris flow deposits in the late Quaternary-Holocene. The Western Doon Valley area is bounded by the Mussoorie range in the north with 1800–2800 m elevation and in the south by young topographic relief of the frontal Siwalik range with ~800 m average elevation. Groundwater quality of Western Doon valley through pictorially representation in the GIS environment, it is inferred that calcium, magnesium, total hardness and nitrate at some locations above the desirable limit. The groundwater prospects map has been prepared by integrating the hydrogeomorphologic, land use/land cover from satellite data (IRS-ID, LISS-III data) slope, soil, drainage density, depth to water table of pre-monsoon and post-monsoon periods (unconfined aquifer), water table fluctuation, static water level (confined to semi-confined aquifers), specific capacity, discharge and drawdown maps using index overlay method in the GIS environment. The groundwater prospects are depicted in five categories Very high, high, moderate, low and very low (runoff zone) integrated with the groundwater quality zones which have been prepared from hydrochemical data. The results indicated that 16.82 % of the area is under Very high potential zone category with 16.11 % and 0.71 % of desirable and undesirable quality of groundwater and 18.65 %, 42.06 %, 6.96 % and 15.46 % classified as high, moderate, low and very low potential zones with desirable and undesirable quality of groundwater for domestic purposes. This study be useful for designing the groundwater prospects and management plan for the sustainable development of study area.     

基于主成分变换模型的DEM格网聚合及其误差分析

利用主成分分析揭示变量之间关系的特性,进而提出一种既能保证较高精度又能较好地保持地形形态特征的DEM格网聚合方法。首先根据主成分变换模型推导DEM格网聚合数学公式,构建主成分聚合模型;然后以30m分辨率DEM转换为90m分辨率DEM为例,根据格网点属性间的权重关系聚合重构DEM。在此基础上,以均值聚合和双线性重采样聚合方法为比较对象,从聚合前后的检查点高程偏差的统计描述、空间分布与自相关性、地形形态保持程度方面分析3种聚合策略下重构DEM的误差特性。最后运用描述统计、半变异分析和等高线套合方法,定量评价主成分聚合重构DEM的质量效果。试验分析结果表明,同均值聚合和重采样聚合相比较,该方法重构的DEM既能保持较高精度,又能很好地保持地形形态特征。     

Validation of Indian National DEM from Cartosat-1 Data

CartoDEM is an Indian National DEM generated from Cartosat-1 stereo data. Cartosat-1, launched in May, 2005, is an along track (aft ?5°, Fore +26°) stereo with 2.5 m GSD, give base-height ratio of 0.63 with 27 km swath. The operational procedure of DEM generation comprises stereo strip triangulation of 500?×?27 km segment with 10 m posting along with 2.5 m resolution ortho image and free—access posting of 30 m has been made available (bhuvan.nrsc.gov.in). A multi approach evaluation of CartoDEM comprising (a) absolute accuracy with respect to ground control points for two sites namely Jagatsinghpur -flat and Dharamshala- hilly; second site i.e. Alwar-plain and hilly with high resolution aerial DEM, (b) relative difference between SRTM and ASTERDEM (c) absolute accuracy with ICESat GLAS for two sites namely Jagatsinghpur-plain and Netravathi river, Western Ghats-hilly (d) relative comparison of drainage delineation with respect to ASTERDEM is reported here. The absolute height accuracy in flat terrain was 4.7 m with horizontal accuracy of 7.3 m, while in hilly terrain it was 7 m height with a horizontal accuracy of 14 m. While comparison with ICESat GLAS data absolute height difference of plain and hilly was 5.2 m and 7.9 m respectively. When compared to SRTM over Indian landmass, 90 % of pixels reported were within ±8 m difference. The drainage delineation shows better accuracy and clear demarcation of catchment ridgeline and more reliable flow-path prediction in comparison with ASTER. The results qualify Indian DEM for using it operationally which is equivalent and better than the other publicly available DEMs like SRTM and ASTERDEM.     

Qualitative and quantitative assessment of TanDEM-X DEM over western Himalayan glaciated terrain

Glaciers have a high impact in the socio-economic sectors including water supply, energy production, flood and avalanches. A high precision digital elevation model (DEM) is required to monitor glaciers and to study various glacier processes. The present study deals with the qualitative and quantitative evaluation of the DEM generated from the bistatic TanDEM-X data by comparing it with GPS, Ice, Cloud, and land Elevation Satellite (ICESat) data and standard global DEMs such as Shuttle Radar Topography Mission (SRTM) and Advanced Space-borne Thermal Emission and Reflection Radiometer Global DEM (ASTER GDEM). The study area consists of highly undulating glaciated terrain in western Himalaya, India. The results reveal that TanDEM-X is slightly better than SRTM both qualitatively and quantitatively, whereas ASTER GDEM showing maximum discrepancy among the three DEMs. The Root Mean Square Error (RMSE) of the TanDEM-X DEM with respect to GPS is 3.5 m at lower relief and 11.9 m at glaciated terrain, against 6.7 and 12.5 m for SRTM and 9.3 and 19.8 m for ASTER GDEM, respectively, for the same sites. On an average, for the whole study area, the RMSE of TanDEM-X is 7.9 m, SRTM is 9.3 m and ASTER GDM is 14.2 m. The RMSE of TanDEM-X, SRTM and ASTER GDEM with respect to ICESat are 16.3, 19.9 and 101.1 m, respectively. It is evident from the analysis that though SRTM is closer to TanDEM-X in terms of accuracy in the mountainous terrain, however, TanDEM-X will be more useful for studying glacier dynamics and topography.     

基于有向窗的自适应SIGMA中值滤波算法

提出了一种能够有效消除InSAR DEM噪声的自适应中值滤波算法:基于有向窗的自适应SIGMA中值滤波。分别采用中值滤波、基于高程的自适应SIGMA中值滤波和基于有向窗的自适应SIGMA中值滤波算法,对InSAR Tandem DEM和模拟DEM进行了滤波处理。结果表明,基于有向窗的自适应SIGMA中值滤波算法不仅能够更有效地消除噪声,而且能够更好地保留图像的边界特征。     

Application of DEM,Remote Sensing and Geomorphic Studies in Identifying a Recent [or perhaps Neogene?] Upwarp in the Dibru River Basin,Assam, India

The Dibru river basin of Assam is investigated to examine the influence of active structure by applying an integrated study on geomorphology, morphotectonics, subsurface structure, Digital Elevation Model (DEM) using topographic map, IRS 1D LISS III, IRS P6 LISS III, SRTM, seismic and subsurface data. Seismic data reveals existence of an upwarp and an important fault in the basement around the central and eastern parts of the Dibru basin, respectively. The influence of these structures is well observed on all the younger formations inferring their active nature possibly till the Recent Period. Existence of fluvial anomalies, viz. annular drainage pattern, lineaments, abrupt changes in the direction of river course, beheaded stream and valley incision infer role of structural control on the fluvial features of this basin. Most commonly used indices for morphotectonic analysis, viz. basin elongation ratio (Re), transverse topographic symmetry (T), asymmetric factor (AF), valley floor width to valley height ratio (Vf) have been used to identify the evidences of active structures in the area. The values of Re indicated tectonically active, T indicated an asymmetric nature, AF indicated tilting and Vf indicated active incision in the Dibru basin. The DEM, profiles across the valley and superimposed longitudinal profiles of incised channel bed and valley shoulder of the Dibru clearly reveal valley incision by the river. Three large paleochannels located in different parts of the basin had their headwaters towards east at the common source, i.e. the Diyun river. These paleochannels had been resulted when their headwaters avulsed to create new rivers due to affect of the subsurface structures during Recent (or perhaps Neogene?) Period.     

Spatial analysis of groundwater potential using remote sensing and GIS in the Kanyakumari and Nambiyar basins,India

Remotely sensed data can provide useful information in understanding the distribution of groundwater, an important source of water supply throughout the world. In the present study, the modern geomatic technologies, namely remote sensing and GIS were used in the identification of groundwater potential zones in the Kanyakumari and Nambiyar basins of Tamil Nadu in India. The multivariate statistical technique was used to find out the relationship between rainfall and groundwater resource characteristics. It has been found out that groundwater not only depends upon rainfall, but various other factors also influence its occurrence. Eight such parameters were considered and multi criterion analysis has been carried out in order to find out the potential zones. Accordingly, it had been concluded that the Kanyakumari river basin has more ground water potential, whereas the Nambiyar basin has less potential. Thus surface investigation of groundwater has proved to be easier, time consistent and cheaper using the geomatic technologies.     

Groundwater potential modelling using remote sensing and GIS: a case study of the Al Dhaid area,United Arab Emirates

The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) DEM and LANDSAT images of spatial resolution 30?m were used to construct groundwater potential zones (GPZ) map by integrating geological fractures, drainage network, slope and relief, and convergence index maps of the study area. Weight and score of each map were developed according to their level of contribution toward groundwater accumulation and spatial distribution of groundwater wells. The area that has very high potential for groundwater is located at the foot of Oman Mountains and Al Dhaid Depression covering an area of about 59.33?km², which is 4.40% of the study area. Further hydrological map and data on hydraulic properties of shallow aquifer, as recorded from observation wells in the regions, have been used to validate the produced GPZ map. The validation result showed sufficient agreement between the produced GPZ map.