Principles of Probabilistic Regional Mineral Resource Estimation

Five principal sources of uncertainty in quantitative mineral resource estimation are listed and illustrated by means of a simple example (mosaic model) and a case history study for large copper deposits in the Abitibi area of the Canadian Shield. Abitibi copper potential originally was estimated on the basis of 1968 estimates of production and reserves totalling 3.12 Mt Cu. This prognostication now could be evaluated on the basis of 2008 copper production and reserves totalling 9.50 Mt Cu. An earlier hindsight study performed on the basis of 1977 data (totalling 5.23 Mt Cu) showed seven new discoveries occurring either in the immediate vicinities of known deposits or on broad regional copper anomalies predicted from the 1968 inputs. By 1977, the global geographic distribution pattern of large copper deposits in the Abitibi area had stabilized. During the next 30 years, new copper was essentially found close to existing deposits, much of it deeper down in the Earth's crust. In this paper, uncertainties associated with copper ore tonnage are analyzed by comparison of 2008 data with 1968 data using (a) log-log plots of size versus rank, and (b) lognormal QQ-plots. Straight lines fitted by least squares on these plots show that 1968 slopes provide good estimates of 2008 slopes but 1968 intercepts are much less than 2008 intercepts. In each linear log-weight versus log-rank plot, the slope is related to fractal dimension of a Pareto frequency distribution, and in a lognormal QQ-plot it is determined by logarithmic variance. The difference between 2008 and 1968 intercepts represents the increase in copper ore production and reserves from 1968 to 2008. The Pareto model fits actual copper and massive sulphides increase over the past 40 years better than the lognormal frequency distribution model for 10 km×10 km cells on favorable environments in the Abitibi area.      

Geology and mineralization of the Tiegelongnan supergiant porphyry-epithermal Cu (Au,Ag) deposit (10 Mt) in western Tibet,China: A review

The Tiegelongnan Cu(Au,Ag)deposit in central Tibet contains more than 10 Mt of copper ranking 29 th in the world.It is characterized by typical porphyry-epithermal alteration and mineralization.In order to improve the understanding of porphyry-epithermal copper deposit in Tibet,new zircon U-Pb age and sulfur isotope data along with published data in the Tiegelongnan are presented to investigate the formation and preservation mechanism.Ore-related intrusive rocks in the Tiegelongnan including Early Cretaceous(about 120 Ma)granodiorite porphyry and diorite porphyry are closely related to the northward subduction of Bangongco-Nujiang ocean.Sulfur mainly comes from deep magma,and ore-forming fluid is affected by both magmatic and meteoric water.The metallogenic setting of Tiegelongnan is consistent with those of Andean porphyry copper deposits in South America.The cover of the Meiriqiecuo Formation volcanic rocks,Lhasa-Qiangtang collision and India-Eurasian collision have significance in the preservation and uplift of the deposit.The formation,preservation and discovery of Tiegelongnan play an important role in exploration of ancient porphyry-epithermal deposits in Tibet.     

Carbon cycle variability in tropical Atlantic across two Early Eocene hyperthermals

Early Eocene hyperthermals are geologically short-lived global warming events and represent fundamental perturbations to the global carbon cycle and the Earth’s ecosystem due to massive additions of isotopically light carbon to the ocean-atmosphere system.They serve as ancient analogs for understanding how the oceanic carbonate system and surface-ocean ecosystem would respond to ongoing and future climate change.Here,we present a continuous carbonate record across the Eocene Thermal Maximum 2(ETM2 or H1,ca.54.1 Ma)and H2(ca.54 Ma)events from an expanded section at Ocean Drilling Program Site 1258 in tropical Atlantic.The abundant calcareous nannofossils and moderate carbonate content throughout the studied interval suggest this record was deposited above the calcite compensation depth(CCD),but below the lysocline and under the influence of terrestrial dilution.An Earth system model cGENIE is used to simulate the carbon cycle dynamics across the ETM2 and H2 to offer insights on the mechanism of the rapid warming and subsequent recovery in climate and ecosystem.The model suggests moderate changes in ocean pH(0.1–0.2 unit)for the two scenarios,biogenic methane from a rechargeable methane capacitor and organic matter oxidation from thawing of the permafrost.These pH changes are consistent with a recent independent pH estimate across the ETM2 using boron isotopes.The carbon emission flux during the ETM2 is at least an order of magnitude smaller than that during the Paleocene–Eocene Thermal Maximum(PETM)(0.015–0.05 Pg C yr^-1vs.0.3–1.7 Pg C yr^-1).The comparable pre-and post-event carbonate contents suggest the lysocline did not over deepen following the ETM2 at this tropical Atlantic site,indicating spatial heterogeneity in the carbonate system due to strong dilution influence from terrestrial weathering and riverine discharge at Site 1258.     

Geochronological and geochemical constraints on the petrogenesis of late Mesoproterozoic mafic and granitic rocks in the southwestern Yangtze Block

Late Mesoproterozoic igneous rocks in the SW Yangtze Block are important for understanding the role of it in reconstruction of the Rodinia supercontinent.In the present study,we report new geochronological,geochemical,and Nd-Hf isotopic data for the Cuoke plagioclase amphibolites and granites in the SW Yangtze Block.Geochronological results show that the plagioclase amphibolites and granites have similar late Mesoproterozoic zircon U-Pb ages of 1168-1162 Ma,constituting a bimodal igneous assemblage.The plagioclase amphibolites have high and variable TiO2 contents(1.15-4.30 wt.%)and Mg#(34-66)values,similar to the tholeiitic series.They are characterized by enrichment in LREEs and LILEs,and have OIB-like affinities with positive Nb and Ta anomalies.The plagioclase amphibolites have positive whole-rockεNd(t)(+3.2 to+4.3)and zirconεHf(t)(+4.3 to+10.7)values,indicating that they were derived from an OIB-like asthenospheric mantle source.The granites belong to the reduced peralkaline A-type series and have negativeεNd(t)value of-6.0 andεHf(t)values of-5.8 to-13.8,indicating a derivation from the partial melting of ancient mafic lower crust.In combination with the~1.05-1.02 Ga bimodal igneous assemblage in the SW Yangtze Block,we propose that the Cuoke 1168-1162 Ma igneous rocks were likely formed in a continental rift basin and argue against the existance of Grenvillian Orogen in the SW Yangtze Block during the late Mesoproterozoic.     

Analysis of prospecting polymetallic metallogenic belts by comprehensive geophysical method

This paper is based on the analysis and research on the silver-lead-zinc polymetallic ore in New Ballyhoo Banner in southern Manzhouli of Inner Mongolia.Because metal mineralization brings rock formations,the geophysical features such as low resistivity,high polarization rate and uneven distribution of magnetization,the comprehensive geophysical methods are adopted including high-precision magnetic measurement,high-power induced polarization,IP field middle gradient and controlled source audio-frequency magnetotellurics.In the survey work of multi-metal ore deposits,from surface sweeping to single point measurement,and from single point to section going deeper layer by layer,the resolution of measurement is continuously improved,and various geophysical methods support and complement each other,so explorers can successfully predict the direction,scale and volume of the metallogenic belts in conjunction with geochemical exploration,geological survey and drilling.It has provided a strong basis for completing the exploration task of predicting the reserve volume of ore bodies.The research conclusions of this exploration case have thus a high reference value in the same type of exploration work.     

利用Grapher绘制彩色渐变剖面平面图

在物探扫面工作中,有大量的剖面数据需要绘制成剖面平面图,要求寻找一个高效快速的制图方法.通过对Grapher 自动化功能的分析和实践,编制程序实现了快速绘制彩色渐变剖面平面图的需求,说明利用自动化脚本能够在获得精美图件的同时,可以极大地提高作图效率.     

冷生风化作用对边坡稳定性影响

The experiment shows that considerable influence on density rock properties are subjected by nival weathering conditions. The main parameter defining the rock suitability for solution various engineering and geological problems is its firmness limit on single axis pressing. The firmness properties of sandstone being in absolutely dry condition for Kabakta suite at the beginning of investigation was 64.7 MPa, for Nerungri suite sandstones it was 48. 7 MPa. The investigations showed how much the nival conditions of cryohypergenesis of rock sandstones in Kabakta and Nerungri suites have destructive influence in comparison with aquale and more over aerale conditions. In the aerale conditions sedimentary rock firmness of Kabakta suite decreased to 23.2 MPa, in aquale conditions to 16.5, and in the nivale conditions to 8.9 MPa. In Nerungri suite sandstones are according to 17.7 MPa, 11.1 MPa, and 6 MPa after 300 freezing and thawing cycles. The common sandstone firmness decrease of Kabakta suite was 25 %,of Nerungri suite it was 23.8%. Marlstone samples after 400 FTC decrease to 62% in the nivale conditions and to 33 % in the aerale conditions. After 3～5 years of exploitation marlstone will destruct due to structural and textural inhomogenesis up to gruss, i.e. it will not meet the requirements of durability.Judging by the results of carried out experiment it should be concluded that by cryogenic weathering the sedimentary rocks (sandstones) and rocks with schistose lithogenic texture (marlstone) are subjected to disintegration. The primary rock samples firmness considerably influences on the disintegration rate.     

《同一个地质计划》的进展与对策

《同一个地质计划（OneGeology）》最初由英国地质调查局于2006年2月提出,已得到全球地学组织的支持。到2007年底,国际地球科学联合会等10个全球学术团体与国际地学组织、2个跨国公司、2位知名人士和67个国家的地质调查局参加了该计划。《同一个地质计划》是各个国家的地质调查局贡献给国际行星地球年的、约1：100万比例尺的、可在网络上很容易取得最好世界地质图数据的计划。该计划的目标是：使可用的地质图数据能被更多的人使用,使需要的人受益,促进互操作能力的增强。《同一个地质计划》的实施,可以提升全球、大陆、行星、海洋地球科学图的编制和出版的合作能力。深化对一些地区地质问题的研究,并可作为国际地球行星年一个切实可用的成果,提升国家地质调查局的形象;运用管理地学知识的领导能力和经验,通过教育、科学、文化和交流。能够处理全球污染对社会、经济和环境的影响问题。促进全球环境保护公约的执行,减缓自然灾害,使全球经济可持续发展,人们的居住环境更安全、更繁荣。精神生活更丰富、更快乐。因此,实施该计划不仅有现实意义,更有重要而深远的政治意义。     

Cenozoic Sea‐land Transition and its Petroleum Geological Significance in the Northern South China Sea

The process of Cenozoic sea-land changes in the northern South China Sea(SCS)controlled the sedimentary filling pattern and played an important role in the petroleum geological characteristics of the northern marginal sedimentary basins.Under the control of the opening process of the SCS,the northern SCS Cenozoic transgression generally showed the characteristics of early in the east and late in the west,and early in the south and late in the north.The initial transgression occurred in the Eocene in the Taixinan Basin(TXNB)of the eastern SCS,while the transgression occurred until the Pliocene in the Yinggehai Basin(YGHB)of the western SCS.International Ocean Discovery Program(IODP)expeditions(Expeditions 367/368)revealed that the initial transgression of the SCS basin occurred at approximately 34 Ma,which was the initial opening time of the SCS.The period of drastic changes in the sedimentary environment caused by large-scale transgression corresponded to the opening time of the southwestern subbasin(approximately 23 Ma),which also represented the peak of the spreading of the SCS.The sea-land transition process controls the distribution of alternating continent-marine facies,marine facies source rocks and reservoirs in the basins.The marine facies source rocks of the basins in the northern SCS have a trend of gradually becoming younger from east to west,which is consistent with the regional process of gradual transgression from east to west.Regional sea-level changes were comprehensively influenced by SCS opening and global sea-level changes.These processes led to the early development in the east and south and late development in the west and north for the carbonate platform in the SCS.Carbonate platforms form another type of"selfgenerating and self-accumulating"oil-gas reservoir in the northern SCS.The sea-land transition controlled the depositional filling patterns of different basins and laid the foundation of marine deposits for oil and gas resources.The source-reservoircap assemblage in the northern SCS was controlled horizontally by provenance supply and sedimentary environmental changes caused by sea-land transition and vertically by the tectonic evolution of the SCS and regional sea-level changes.     

Geochemical Characterizations of Source and Depositional Environment of Hydrocarbons in the Lake Albert Rift Basin

Despite the upsurge in hydrocarbon exploration in the Lake Albert Rift Basin(LARB)over the past three decades,systematic characterization of hydrocarbon compositions remains lacking,leading to uncertainties in source rock and oil generation determination.We characterized crude oil compositions and oil sand samples in the northern and southern subbasins of LARB.The relative abundance of normal and branched linear alkanes,hopanes,steranes,and aromatic hydrocarbon suggest that northern and southern hydrocarbons were deposited in anoxic to suboxic lacustrine environments and share similar biological source compositions(i.e.,a mixture of plants and aquatic algae and bacteria).Relative to southern samples,northern samples show more negative δ¹³C values for oils,saturates and aromatics,indicating longer migration paths,and exhibit higher MPI-1,DNR-1 and 4-/1-MDBT ratios,indicating higher maturity.Between the two possible sets of source rocks(upper Miocene and Jurassic strata),the positive δ¹³C values of saturated hydrocarbons(average=-20.5‰)suggest that the upper Miocene lacustrine shale is the most likely candidate.Oleanane index(<5% in our samples)does not exclude either source rock possibility,and C₂₈/C₂₉ regular sterane(average=0.63)may be biased by high terrestrial inputs in a lacustrine setting.Together,our data show that northern and southern oils originate from the same source rocks but different oil kitchens.Given the similar geochemical characteristics of southern and northern oils,previous exploration successes in the northern subbasin likely suggest similar potential in the southern sector,while other elements influencing exploration success must be also evaluated.     

Statistical considerations for grain-size analyses of tills

Relative percentages of sand, silt, and clay from samples of the same till unit are not identical because of different lithologies in the source areas, sorting in transport, random variation, and experimental error. Random variation and experimental error can be isolated from the other two as follows. For each particle-size class of each till unit, a standard population is determined by using a normally distributed, representative group of data. New measurements are compared with the standard population and, if they compare satisfactorily, the experimental error is not significant and random variation is within the expected range for the population. The outcome of the comparison depends on numerical criteria derived from a graphical method rather than on a more commonly used one-way analysis of variance with two treatments. If the number of samples and the standard deviation of the standard population are substituted in at-test equation, a family of hyperbolas is generated, each of which corresponds to a specific number of subsamples taken from each new sample. The axes of the graphs of the hyperbolas are the standard deviation of new measurements (horizontal axis) and the difference between the means of the new measurements and the standard population (vertical axis). The area between the two branches of each hyperbola corresponds to a satisfactory comparison between the new measurements and the standard population. Measurements from a new sample can be tested by plotting their standard deviation vs. difference in means on axes containing a hyperbola corresponding to the specific number of subsamples used. If the point lies between the branches of the hyperbola, the measurements are considered reliable. But if the point lies outside this region, the measurements are repeated. Because the critical segment of the hyperbola is approximately a straight line parallel to the horizontal axis, the test is simplified to a comparison between the means of the standard population and the means of the subsample. The minimum number of subsamples required to prove significant variation between samples caused by different lithologies in the source areas and sorting in transport can be determined directly from the graphical method. The minimum number of subsamples required is the maximum number to be run for economy of effort.     

Stress-strain analysis of geogrid-supported liners over subsurface cavities

Summary Finite element analyses were conducted to investigate the magnitude of tensile strains imposed on landfill liners due to the formation of subsurface cavities. The study incorporated the significance of using geogrids to reduce the magnitude of strains and possibly the potential for collapse of landfill liners. Variations of key parameters included depth of overburden (D) and diameter of the cavity (B). Estimated stress distributions were compared to theoretical values obtained from a model reported in the literature. Results indicated that, contrary to conventional wisdom, the critical area based on the mechanics of arching was above the edge of the cavity where stress concentration occurred. Incorporation of geogrid reinforcement reduced the magnitude of tensile strains. The tensile force in the geogrid was dependent upon the size of the cavity, the depth of the overburden, and the applied pressure.     

Viscous effects on penetrating shafts in clays

The penetration of rigid objects such as piles and penetrometers into soils creates a zone of soil disturbance around them. The extent of this disturbed zone influences the resistance of the moving rigid body. This paper presents a theoretical framework to analyze the resistance in the disturbed zone created by a shaft penetrating a clay soil. The soil is modeled as a viscous material after it reaches failure [critical state (CS)]. The results of this analysis show that the viscous drag stress component on the shaft surface is influenced by the size of disturbed zone that has reached CS around the shaft, the shear viscosity of the soil and the velocity profile (or strain rate) in the CS zone around the shaft. The size of CS zone, the velocity profile and the viscosity of soil are interdependent. Large variation in viscous drag occurs when the size of the CS soil zone is less than four times the shaft’s radius. Limiting drag occurs when the size of the CS soil zone exceeds six times the shaft’s radius. The theoretical velocity distribution of the movement of soil in the CS zone shows that the soil is dragged along with shaft in the near field (close to the shaft surface) and moves upwards in the far field.     

具彩色斑纹颅形贝在广西桂林下石炭统黄金组中的发现:兼论颅形贝属的地质地理分布

文中描述了产自广西桂林地区下石炭统黄金组下部的颅形贝属一新种,桂林颅形贝(Cranaena guilinensis)。新种以平直的前结合缘和背壳上发育中槽为特征。在4枚标本上发现保存有放射状的彩色条带,表明该种当时生活在温暖海域的浅水环境。对该属70个种的地质地理分布和生物多样性变化的初步分析表明,该属可能起源于早泥盆世欧美大陆西北缘的老世界区,之后的地理分布和生物多样性发展以北美地区为中心,经历了中泥盆世—晚泥盆世早期和早石炭世2次比较明显的辐射演化、迁移扩散高峰和晚泥盆世晚期的1次严重衰退。第1次高峰是中泥盆世—晚泥盆世早期,该属的生物多样性达到巅峰,生物地理分布范围扩大到欧美大陆之外的西伯利亚板块、哈萨克斯坦板块和华南板块等;第2次高峰是早石炭世,该属的生物多样性虽不及前一次,但获得了最广泛的地理分布,不仅在北方大陆有分布,而且已进入到冈瓦纳大陆边缘。晚泥盆世晚期该属的1次严重衰退显然与F/F灭绝事件有关。早石炭世之后,该属进入衰退阶段,最终在二叠纪初灭绝。     

Lower Carboniferous (Dinantian) stratigraphy and structure of the Walterstown-Kentstown area,Co. Meath,Ireland

Stratigraphic units are defined and described for the Lower Carboniferous succession in the Walterstown-Kentstown area of Co. Meath, Ireland. A complete (unexposed) Courceyan succession from the terrestrial red bed facies of the Baronstown Formation to the Moathill Formation of the Navan Group has been penetrated in several boreholes. Although the lower part of the sequence is comparable with the Courceyan succession at Navan and Slane, the middle part of the sequence differs markedly in the Walterstown-Kentstown area and two new members, the Proudstown and Walterstown Members, are defined in the upper part of the Meath Formation. Syndepositional faulting was initiated during the Courceyan, probably in latest Pseudopolygnathus multistriatus or early Polygnathus mehli latus time. Movement on the ENE trending St. Patrick's Well Fault influenced the deposition of the Walterstown Member and the overlying Moathill Formation and was probably associated with the development of the East Midlands depocentre to the south of the area. A second episode of tectonism in the latest Courceyan or early Chadian resulted in uplift and erosion and the development of ‘block and basin’ sedimentation. Subsequent transgression of the uplifted block led to the establishment of the Kentstown Platform, bounded to the north, west and south by rocks of basinal facies. The Milverton Group (Chadian-Asbian), confined to this platform, unconformably overlies Courceyan or Lower Palaeozoic strata and is subdivided into three formations: Crufty Formation (late Chadian), Holmpatrick Formation (late Chadian-Arundian) and Mullaghfin Formation (late Arundian-Asbian). The Walterstown Fault controlled the western margin of the Kentstown Platform at this time. Contemporaneous basinal sediments of the Fingal Group (Lucan and Naul Formations) accumulated to the west of the Walterstown Fault and are much thicker than age-equivalent platform facies. Platform sedimentation ceased in latest Asbian to early Brigantian time with tectonically induced collapse and drowning of the platform; platform carbonates of the Mullaghfin Formation are onlapped northwards by coarse proximal basinal facies of the Loughshinny Formation. A distinct gravity anomaly in the Kentstown area suggests the presence of a granitoid body within the basement. The Kentstown Platform is therefore considered to have formed on a buoyant, granite-cored, footwall high analogous to the Askrigg and Alston Blocks of northern England.     

Controls on the evolution and demise of Lower Carboniferous carbonate platforms,northern margin of the Dublin Basin,Ireland

Shallow water platform limestones of the Chadian–Asbian Milverton Group are restricted to the north-eastern part of the Lower Carboniferous (Dinantian) Dublin Basin. Here, they are confined to two granite-cored fault blocks, the Kentstown and Balbriggan Blocks, known to have been active during the late Dinantian. Three areas of platform sedimentation are delimited (the Kentstown, Drogheda and Milverton areas), although in reality they probably formed part of a single carbonate platform. Resedimented submarine breccias and calciturbidites (Fingal Group) composed of shallow water allochems and intraclasts sourced from the platform accumulated, along with terrigenous muds, in the surrounding basinal areas. Sedimentological evidence suggests that the Kentstown and Balbriggan Blocks possessed tilt-block geometries and developed during an episode of basin-wide extensional faulting in late Chadian time. Rotation of the blocks during extension resulted in the erosion of previously deposited sequences in footwall areas and concomitant drowning of distal hangingwall sequences. Antithetic faults on the northern part of the Balbriggan Block aided the preferential subsidence of the Drogheda area and accounts for the anomously thick sequence of late Chadian platform sediments present there. Continued subsidence and/or sea-level rise in the late Chadian–early Arundian resulted in transgression of the Kentstown and Balbriggan Blocks; carbonate ramps developed on the hangingwall dip slopes and transgressed southward with time. Subsequent progradation and aggradation of shallow water sediments throughout the Arundian to Asbian led to the development of carbonate shelves. Several coarse conglomeratic intervals within the contemporaneous basinal sequences of the Fingal Group attest to periodic increases of sediment influx associated with the development of the shelves. Sedimentological processes controlled the development of the carbonate platforms on the hangingwall dip slopes of the Kentstown and Balbriggan Blocks, though periodic increases of sediment flux into the basinal areas may have been triggered by eustatic falls in sea level. In contrast, differential subsidence along the bounding faults of these blocks exerted a strong control on the margins of the late Dinantian shelves, maintaining relatively steep slopes and inhibiting the progradation of the shelves into the adjacent basins. Tectonically induced collapse and retreat of the platform margins occurred in the late Asbian–early Brigantian. Platform sediments are overlain by coarse-grained proximal basinal facies which fine upwards before passing into a thick shale sequence, indicating that by the late Brigantian carbonate production had almost stopped as the platforms were drowned.     

Nouvelle interprétation tectonique de la montagne Sainte-Victoire (Provence,France)

The explanation normally given for the tectonics of Sainte-Victoire Mountain, a dozen kilometres east of Aix-en-Provence, to the north of the limestone Provence, is incorrect. To the east, the morphology of the Sainte-Victoire is subdued, whereas to the west, before the mountain breaks savagely, the morphology is that of a young mountain as appears in Alpine landscapes. This unusual aspect in the region and the large subvertical faults with vertically striated surfaces that mark the massif to the south and to the west, induce the idea of strong vertical uplifts and caste doubt on the tectonic interpretation given in 1962 by Corroy et al. According to those authors, the Sainte-Victoire is a unit of Jurassic and Cretaceous formations overthrusting 1800 m to the south conglomerates of the Late Cretaceous or Palaeocene. New observations about the conglomerate transgression over the Jurassic and Cretaceous beds, and about the faults around and on the massif do not give evidence of an overthrusting but, on the contrary, induce the idea of a uplift, perhaps still active, in the form of a ‘piano key’ inclined to the northeast. To cite this article: J. Ricour et al., C. R. Geoscience 337 (2005).     

Evolution of the European Cenozoic Rift System: interaction of the Alpine and Pyrenean orogens with their foreland lithosphere

The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation.     

青藏高原风火山流域坡面尺度活动层土壤水热时空变化特征

以风火山流域某阴坡坡顶、 坡底和阳坡坡底活动层土壤水热及气象资料为基础, 对青藏高原多年冻土区不同地形条件下的土壤水热时空变化特征进行了分析。结果表明： 在融化阶段, 除表层5 cm外, 阴坡坡底各深度土壤开始融化日期均比坡顶早, 比阳坡坡底晚; 阴坡坡脚各深度土壤含水量均大于坡顶和阳坡坡底。在冻结阶段, 开始冻结日期在阴坡坡底均比坡顶早, 但比阳坡坡底晚; 阴坡坡底各深度土壤含水量均高于坡顶相应土层的含水量, 在20 cm、 100 cm、 160 cm深处高于阳坡相应土层的含水量, 但在5 cm、 50 cm深处, 稳定冻结后两者的含水量差异较小。在整个冻融过程中, 阴坡坡底土壤温度对气温变化的响应弱于坡顶及阳坡坡底, 但其土壤水分对降水的响应强于坡顶及阳坡坡底。植被生长发育受水分和热量条件的制约, 不同地形条件下水热时空变化差异将影响植被空间分布特征。在未来气候变暖情况下, 上坡位植被可能因为水分胁迫而退化, 出现荒漠化现象, 而下坡位由于受侧向流的影响, 土壤水分对降水的响应强烈, 植被不会发生显著退化; 在不同坡向之间, 同一坡位阳坡植被退化程度可能大于阴坡。     

渭河中游宝鸡-扶风北岸斜坡结构及其对大型滑坡形成机理的指示意义

渭河中游宝鸡-扶风段北岸塬边集中发育大型黄土滑坡,体积超过1 000×10⁴ m³的滑坡达58处。在区域活动断裂调查、地球物理勘察、典型斜坡结构与构造调查基础上,研究了大型滑坡结构及其形成机理。研究表明：渭河北缘活动断裂以地堑式结构控制北坡塬边斜坡的地貌,主断裂面倾向南,倾角平均为68°,而次级断面结构组合控制斜坡结构,影响塬边大型黄土滑坡结构;塬边主断裂面与多个大型黄土滑坡后缘滑壁一致,断裂最大下挫距离7.1 m,影响大型滑坡的形态及发生过程;活动断裂呈地堑式结构,局部次级断面控制塬边多级滑动面的结构及其演化过程,如杨家村滑坡,局部滑坡剪出受断裂结构控制,剪出口角度可达72°,大部分剪出口未受到断裂面影响,角度平均为23°;三门组黏土岩黏粒体积分数超过35%,塑限平均值为23,是滑坡的层间剪切带;降雨诱发老滑坡复活是目前新滑坡发育的主要形式,大量的老滑坡形成于0.009 Ma BP二级阶地侵蚀期,而古滑坡形成于0.13 Ma BP三级阶地侵蚀期。