采用光学指向系统建立天马13m望远镜指向模型

描述了采用光学望远镜辅助天马13m射电望远镜进行指向测量以及建立指向误差修正模型的方法. 对于小口径望远镜, 指向校准目标源比较少, 用射电法建立指向模型难以覆盖全天区. 利用上海天文台天马13m射 电望远镜进行光学望远镜辅助射电望远镜指向测量研究, 在13m天线背架上安装一套光学指向系统, 获得了优 于3''的重复测量误差. 此外, 通过对影响天线指向因素的分析, 建立了包含8个误差项的指向误差修正模型以及 光轴和电轴偏差模型. 将指向模型代入天线伺服控制系统, 对校准目标射电源进行十字扫描, 得到指向样本残差约 为5''. 该研究可以为实现高精度指向建模提供一种参考方法.     

基于数值模拟的大口径高精度射电望远镜台址风障优化设计研究

随着射电望远镜口径增大、观测频率提高, 对其指向精度的要求也越来越高. 然而, 望远镜服役于野外台站, 台址风扰对天线指向精度的影响在高频段观测时已不能忽略. 由于风扰的时变性, 现有的抗风方法无法保障大口径高指向精度望远镜在高频段的有效观测时长. 因此, 提出了一种基于风障精确布置改善台址风环境的方法. 通过数值模拟构建了风障仿真模型, 并将仿真结果与风洞实测数据比较, 两种孔隙率风障的平均误差分别为3.7%和6.1%, 保证了风障模型的可靠性. 以新疆奇台射电望远镜(QiTai radio Telescope, QTT)台址为例, 基于QTT台址斜坡地形构建了计算域模型, 开展单风障不同高度、不同孔隙率的系列风场仿真试验, 得到了风障参量与下游挡风效果的关系. 基于单风障合理高度和最优孔隙率设置南北风障, 仿真结果表明在确定高度下最优孔隙率可以组合, 孔隙率0.1-0.1组合的风障挡风效果最优, 南方向来风在天线区域可以有效降低75%以上的风速.     

Measuring fiber position errors from spectral data

Precise fiber positioning is crucial to a wide field,multi-fiber spectroscopic survey such as the Guoshoujing Telescope(the Large Sky Area Multi-Object Fiber Spectroscopic Telescope,LAMOST).Nowadays,most position error measurements are based on CCD photographic and image processing techniques.These methods only work for measuring errors orthogonal to the telescope optical axis,but there are also errors that lie parallel to the optical axis of the telescope,such as defocusing,and errors caused by the existing deviation angle between the optical axes of a fiber and the telescope.Directly measuring the two latter types of position errors is difficult for an individual fiber,especially during observations.Possible sources of fiber position errors are discussed in brief for LAMOST.By constructing a model of magnitude loss due to the fiber position error for a point source,we propose an indirect method to calculate both the total and systematic position errors for each individual fiber from spectral data.Restrictions and applications of this method are also discussed.     

Interference coupling analysis based on a hybrid method: application to a radio telescope system

Working in a way that passively receives electromagnetic radiation from a celestial body,a radio telescope can be easily disturbed by external radio frequency interference as well as electromagnetic interference generated by electric and electronic components operating at the telescope site.A quantitative analysis of these interferences must be taken into account carefully for further electromagnetic protection of the radio telescope. In this paper, based on electromagnetic topology theory, a hybrid method that combines the Baum-Liu-Tesche(BLT) equation and transfer function is proposed.In this method, the coupling path of the radio telescope is divided into strong coupling and weak coupling sub-paths, and the coupling intensity criterion is proposed by analyzing the conditions in which the BLT equation simplifies to a transfer function. According to the coupling intensity criterion, the topological model of a typical radio telescope system is established. The proposed method is used to solve the interference response of the radio telescope system by analyzing subsystems with different coupling modes separately and then integrating the responses of the subsystems as the response of the entire system. The validity of the proposed method is verified numerically. The results indicate that the proposed method, compared with the direct solving method, reduces the difficulty and improves the efficiency of interference prediction.     

A low frequency radio telescope at mauritius for a southern sky survey

A new, meter-wave radio telescope has been built in the north-east of Mauritius, an island in the Indian Ocean, at a latitude of -20.14‡. The Mauritius Radio Telescope (MRT) is a Fourier Synthesis T-shaped array, consisting of a 2048 m long East-West arm and an 880 m long South arm. In the East-West arm 1024 fixed helices are arranged in 32 groups and in the South arm 16 trolleys, with four helices on each, which move on a rail are used. A 512-channel digital complex correlation receiver is used to measure the visibility function. At least 60 days of observing are required for obtaining the visibilities up to 880 m spacing. The Fourier transform of the calibrated visibilities produces a map of the area of the sky under observation with a synthesized beam width 4′ × 4.6′ sec(δ + 20.14‡) at 151.5 MHz. The primary objective of the telescope is to produce a sky survey in the declination range –70‡ to –10‡ with a point source sensitivity of about 200 mJy (3a level). This will be the southern sky equivalent of the Cambridge 6C survey. In this paper we describe the telescope, discuss the array design and the calibration techniques used, and present a map made using the telescope.     

Efficiency Analysis of Focal Plane Arrays in Deep Dishes

In this paper we demonstrate the practical analysis of a dense Focal Plane Array (FPA) for a deep dish radio telescope. The analytical model is used to optimize efficiency and bandwidth of deep dish system by varying design parameters such as feed size and FPA aperture field. A prototype FPA was evaluated on the Westerbork Synthesis Radio Telescope (WSRT) and the resulting efficiency is discussed.     

大口径射电望远镜电磁兼容评估技术研究

电磁兼容性是设备或系统的重要性能指标, 也是保障系统的工作效能和提高系统可靠性的重要因素. 大口径射电望远镜运行阶段, 台址周围无线电业务及内部潜在的电磁干扰会降低观测系统灵敏度、影响天文观测的质量. 本论文针对拟建的新疆110 m全向可动射电望远镜(Qi Tai raido Telescope, QTT)开展了系统电磁兼容评估技术及控制方法研究, 具有重要的工程应用价值. 首先, 依据现有电波环境测量方法的不足, 深入分析了仪器设备的关键参数配置方法及测量时间计算方法, 采用Y因子法校准测量数据, 提出一种准实时电波环境测量方法. 面向高重复性宽带频谱, 分析了宽带频谱信号和噪声特征, 结合标准差理论, 提出一种基于邻值比较的信噪分离方法, 并采用邻值统计方法优化关键参数, 提高信噪分离精度. 针对QTT台址, 开发了自动化电波环境监测系统, 该系统6 GHz以下频段系统增益大于40 dB, 系统噪声系数小于2 dB, 测量不确定度小于1.49 dB, 具有极高的系统灵敏度和测量精度; 分析了频谱监测数据流, 设计了基于HDF5 (Hierarchical Data Format version 5)的数据存储格式, 开发了自动化电波环境测量和监控软件及数据处理软件. 依据QTT台址长期监测数据, 评估分析了台址电磁环境、主要干扰源特征及其影响. 其次, 提出大口径射电望远镜馈源口面干扰电平限值量化方法, 建立了基于台址地形的电波传播模型, 分析了现有电波传播模型的优缺点及适应性, 结合QTT台址实际地形及地质特征, 采用Longley-Rice和Two-Ray电波传播模型, 预测分析了QTT台址潜在干扰区域电磁干扰达到射电望远镜的电波路径衰减, 结合大口径射电望远镜天线增益量化方法, 提出设备所在位置干扰电平限值量化方法, 运用该方法对QTT台址潜在干扰区域的干扰电平限值进行量化. 依据设备所在位置干扰电平限值, 调研分析了国内外军用、民用电磁兼容测量标准, 结合电磁干扰对射电天文观测的影响, 提出一种大口径射电望远镜电磁兼容控制方法, 解决了现有电波暗室测量系统无法直接测量评估电子设备电磁兼容的问题, 该电磁兼容控制方法计划应用于QTT建设及运行阶段, 确保系统拥有良好的电磁兼容性. 最后, 依据QTT台址潜在干扰区域干扰电平限值, 结合典型电子设备电磁辐射频谱, 分析了QTT电磁兼容设计需求, 提出电磁兼容设计初步方案. 另外, 针对台址建筑设施内的中低电磁辐射干扰源, 提出一种低成本建筑屏蔽方法, 应用于QTT台址现有建筑.     

Acceleration feedback control(AFC) enhanced by disturbance observation and compensation(DOC) for high precision tracking in telescope systems

In this paper, a cascade acceleration feedback control(AFC) enhanced by a disturbance observation and compensation(DOC) method is proposed to improve the tracking precision of telescope systems.Telescope systems usually suffer some uncertain disturbances, such as wind load, nonlinear friction and other unknown disturbances. To ensure tracking precision, an acceleration feedback loop which can increase the stiffness of such a system is introduced. Moreover, to further improve the tracking precision, we introduce the DOC method which can accurately estimate the disturbance and compensate it. Furthermore,the analysis of tracking accuracy used by this method is proposed. Finally, a few comparative experimental results show that the proposed control method has excellent performance for reducing the tracking error of a telescope system.     

天马望远镜连续谱观测系统

天马望远镜是目前亚洲最大的全方位可转动的射电望远镜。连续谱观测对于天马望远镜具有重要意义。主要介绍天马望远镜连续谱观测系统的相关信息及其实现情况,包括:天马望远镜连续谱观测的过程、天马望远镜连续谱观测系统的硬件和软件系统的组成,以及连续谱观测系统的测试观测结果。在C波段6.5 GHz的观测结果表明:连续谱观测系统可实现单点观测和成图观测。修正后指向误差的平均值为2.2″,均方根误差为4.3″。目前该系统已用于天马望远镜的连续谱观测,取得了较好的结果,验证了系统的有效性。     

大口径射电望远镜主面误差分析与修正

建立了40 m口径射电望远镜天线结构有限元模型,依据模型分析结果,对40 m口径射电望远镜天线主面误差进行了分析和数值计算;从误差修正的角度,分别对主面误差的最佳拟合修正、安装角预调的工作仰角综合修正进行了分析与数值计算．误差修正后的计算结果表明,主面精度得到了大幅度的提高．分析结果为该望远镜天线的实际建造提供了参考．     

A Research on the Gravity Deformation of Delingha 13.7m Telescope

Based on digital photogrammetric measurements, the antenna panels of the Delingha 13.7m radio telescope are adjusted to make the main dish have an optimal paraboloidal surface at the elevation of 52°, thus the overall antenna efficiency is optimized for different observing elevations. Observations indicate that the aperture efficiency of the telescope has been improved approximately twice in comparison with the antenna panels adjusted on the basis of theodolite measurements. According to the results of the measurements at different elevations, the models of antenna gravity deformation are built, including the displacement and tilt angle of the subreflector, as well as the focal length and surface error of the main reflector, as functions of elevation angle. In the process of modeling the gravity deformation of the main dish, instead of the direct calculation method, the least square fitting on the measured surface errors at different elevation angles is adopted, in order to reduce the effect of measurement errors on the accuracy of the model.     

An RTML transport implementation on the Liverpool Telescope

The Liverpool Telescope is a 2.0m fully robotic telescope based on the Canary island of LaPalma. In this paper I describe the Java(TM) implementation of a method to transport RTML (Remote Telescope Markup Language) between a Node Agent (Web Services endpoint) embedded at the telescope and a remote Agent. The advantages and disadvantages of the method are discussed, along with the suitability of the protocol for HTN standardisation. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A new calibration model for pointing a radio telescope that considers nonlinear errors in the azimuth axis

A new calibration model of a radio telescope that includes pointing error is presented, which considers nonlinear errors in the azimuth axis. For a large radio telescope, in particular for a telescope with a turntable, it is difficult to correct pointing errors using a traditional linear calibration model, because errors produced by the wheel-on-rail or center bearing structures are generally nonlinear. Fourier expansion is made for the oblique error and parameters describing the inclination direction along the azimuth axis based on the linear calibration model, and a new calibration model for pointing is derived. The new pointing model is applied to the 40 m radio telescope administered by Yunnan Observatories, which is a telescope that uses a turntable. The results show that this model can significantly reduce the residual systematic errors due to nonlinearity in the azimuth axis compared with the linear model.     

基于自回归滑动平均模型的大口径天线风速预测方法

针对大口径、高性能射电望远镜天线受到的随机及时变风扰的问题, 利用自回归滑动平均模型预测望远镜周围风速, 提前计算风致结构变形量, 同时为望远镜伺服控制系统提供足够执行时间来降低风扰影响. 基于新疆奇台110m口径全向可动射电望远镜(QiTai Telescope, QTT)台址风场数据特征, 通过赤池信息准则和贝叶斯信息准则辨识模型阶次, 利用最大似然法估计模型参数, 分析模型残差特性以检验自回归滑动平均模型的有效性. 通过计算不同季度预测数据与测试数据偏差得到预测模型的精度, 夏季平均绝对误差为0.133mcdots^-1, 秋季平均绝对误差为0.162mcdots^-1, 冬季平均绝对误差为0.287mcdots^-1. 整体来看, 基于QTT台址不同季度风速数据建立的自回归滑动平均模型预测误差较小, 满足射电望远镜风扰控制系统的需求, 能为大口径射电望远镜风扰控制提供必要数据支撑.     

Rapid mapping of the sky at 240 MHz using the antennas of the Giant Metrewave Radio Telescope

In this paper we describe a method for measuring the effective receiver temperature T _erc and its variation for the entire receiver chain of a radio telescope, and use it to make a radio-continuum map of the sky at 240 MHz using the Giant Metrewave Radio Telescope (GMRT). We also show that in the case of GMRT, T _erc varies mainly with elevation and ambient temperature. The calibration techniques evolved here are applicable to similar interferometers with a large number of antennas, several frequency bands and a number of receiver systems at room temperature (where conventional methods are time-consuming). This method ideally requires just one complete day of observations in a frequency band.     

射电望远镜远场区域强干扰源规避方法研究

随着频率使用率的提高, 射电天文台址地面或空间存在强电磁干扰致使望远镜接收机系统处于非线性状态. 为减少强电磁干扰的影响、提高天文观测效率, 提出了一种基于望远镜远场区域的强干扰源规避方法. 首先, 通过仿真分析确定的射电望远镜远场方向图, 结合望远镜与干扰源之间的位置关系, 分析了强电磁干扰到达射电望远镜焦点处的功率响应, 并依据接收机第2阶中频放大器性能参数, 确定射电望远镜处于非饱和状态的规避角度计算方法. 其次, 采用该方法计算分析了民航飞机对射电望远镜的影响, 若民航飞机上有主动发射的干扰源, 且不经过反射等传播现象, 当射电望远镜主波束轴偏开一定方向后, 可有效降低对射电望远镜的干扰强度.     

The potential of FAST in detecting celestial hydroxyl masers and related science topics

The Five-hundred-meter Aperture Spherical radio Telescope(FAST) will make contributions to studies of Galactic and extragalactic masers. This telescope, with construction finished and now undergoing commissioning, has an innovative design that leads to the highest sensitivity of any single dish radio telescope in the world. FAST's potential for OH megamaser research is discussed, including the sky density of masers detectable in surveys. The scientific impact expected from FAST maser studies is also discussed.     

明安图射电频谱日像仪图像的强度定标方法

明安图射电频谱日像仪(Mingantu Spectral Radioheliograph, MUSER)能够在0.4--15GHz超宽频带内实现高时间、高空间、高频率分辨率的太阳射电成像. 而射电亮温度是描述太阳物理过程的一个重要的参数, 在研究不同射电辐射机制、太阳磁场以及太阳爆发过程中非热粒子加速等问题上有着非常重要的作用, 因此必须对MUSER观测的图像进行亮温度定标. 将介绍一种适用于射电日像仪图像强度定标的方法. 太阳射电图像中包含着太阳圆盘的结构信息, 利用射电日像仪短基线的可视度函数拟合第一类贝塞尔函数, 可以得到图像中宁静太阳圆盘的射电半径和强度, 再利用瑞利-金斯定律和每天的太阳射电流量可以计算得到每天图像的定标因子$G_c$, 从而实现对MUSER图像强度的定标. 将该方法应用到MUSER的实际观测数据中, 包括宁静太阳和有太阳射电爆发等不同的情况, $G_c$的误差基本不超过10%, 得到的宁静太阳亮温度与其他宁静太阳的结果具有较高的相关性, 表明了此方法的可行性和有效性.     

A novel method for telescope polarization modeling based on an artificial neural network

The polarization characteristics of an astronomical telescope is an important factor that affects polarimetry accuracy. Polarization modeling is an essential means to achieve high precision and efficient polarization measurement of the telescope, especially for the alt-azimuth mount telescope. At present, the polarization model for the telescope(i.e., the physical parametric model) is mainly constructed using the polarization parameters of each optical element. In this paper, an artificial neural network(ANN) is used to model the polarization characteristics of the telescope. The ANN model between the physical parametric model residual and the pointing direction of the telescope is obtained, which reduces the model deviation caused by the incompleteness of the physical parametric model. Compared with the physical parametric model, the model fitting and predictive accuracy of the New Vacuum Solar Telescope(NVST) is improved after adopting the ANN model. After using the ANN model, the polarization cross-talk from I to Q, U, and V can be reduced from 0.011 to 0.007, and the crosstalk among Q, U, and V can be reduced from 0.047 to 0.020, which effectively improves the polarization measurement accuracy of the telescope.     

A preliminary study on photogrammetry for the FAST main reflector measurement

The Five-hundred-meter Aperture Spherical radio Telescope(FAST) is the largest single-dish radio telescope in the world. In this paper, we apply photogrammetry to measure local area surface accuracy of the FAST main reflector. Contrast with the existing photogrammetric methods that need to stick the cooperation target on the panel. In this paper, we directly detect nodes according to their natural feature. Analyzing the FAST reflector composition, we propose a two-step Hough transform method for node detection. Due to the high similarity of the neighboring area around nodes, it is hard to match two images by the feature matching method. Therefore, we apply the nodes combination approach to obtain the homography matrix between two photos for nodes matching. After nodes detection and matching,triangulation and bundle adjustment algorithms are adopted for 3 D reconstruction. During the experiment,the adjusted node position deform a local area of the FAST main reflector into a spherical cap with a radius of 300 m. The experimental result shows that the measurement accuracy of the sphere with a radius of 300 m is 12.299 mm, indicating that it is feasible to apply photogrammetry for the FAST main reflector measurement.