Calibrating the Pointing and Optical Parameters of the STEREO Heliospheric Imagers

The Heliospheric Imager (HI) instruments on the Solar TErrestrial RElations Observatory (STEREO) observe solar plasma as it streams out from the Sun and into the heliosphere. The telescopes point off-limb (from about 4° to 90° elongation) and so the Sun is not in the field of view. Hence, the Sun cannot be used to confirm the instrument pointing. Until now, the pointing of the instruments have been calculated using the nominal preflight instrument offsets from the STEREO spacecraft together with the spacecraft attitude data. This paper develops a new method for deriving the instrument pointing solutions, along with other optical parameters, by comparing the locations of stars identified in each HI image with the known star positions predicted from a star catalogue. The pointing and optical parameters are varied in an autonomous manner to minimise the discrepancy between the predicted and observed positions of the stars. This method is applied to all HI observations from the beginning of the mission to the end of April 2008. For the vast majority of images a good attitude solution has been obtained with a mean-squared deviation between the observed and predicted star positions of one image pixel or less. Updated values have been obtained for the instrument offsets relative to the spacecraft, and for the optical parameters of the HI cameras. With this method the HI images can be considered as “self-calibrating,” with the actual instrument offsets calculated as a byproduct. The updated pointing results and their by-products have been implemented in SolarSoft.     

Determination of the Photometric Calibration and Large-Scale Flatfield of the STEREO Heliospheric Imagers: I. HI-1

The aim of this paper is to calculate an accurate large-scale flatfield for the STEREO HI-1 instruments. This is done by analysing the variation in intensity of stars in the background starfield as they pass across the CCD. In order to use the background starfield, a photometric calibration is performed which defines a HI magnitude scale and a conversion between this scale and measured intensity. The photometric calibration uses stellar spectra folded through the instrument response to make initial intensity predictions. However, a secondary prediction method based on the photometric calibration, which blends the R-, V- and B-magnitudes of a star, is derived for stars with no spectral information.     

On the Temporal Variability of the “Strahl” and Its Relationship with Solar Wind Characteristics: STEREO SWEA Observations

The “strahl” is a specific population of the solar wind, constituted by strongly field aligned electrons flowing away from the Sun, with energies >60 eV. Using the Solar Wind Electron Analyzer (SWEA) onboard STEREO, we investigate the short time scale fluctuations of this population. It is shown that its phase space density (PSD) at times presents fluctuations larger than 50% at scales of the order of minutes and less. The fluctuations are particularly strong for periods of a few tens of hours in high-speed streams, following the crossing of the corotating interaction region, when the strahl is also the most collimated in pitch angle. The amplitude of the fluctuations tends to decrease in conjunction with a broadening in pitch angle. Generally, the strongly fluctuating strahl is observed when the magnetic field is also highly perturbed. That SWEA is able to perform a very rapid 3D analysis at a given energy is essential since it can be demonstrated that the observed magnetic turbulence can only marginally perturb the PSD measurements.     

Use of the FITS World Coordinate System by STEREO/SECCHI

The World Coordinate System (WCS) is a standard for embedding coordinate information in a Flexible Image Transport System (FITS) header. Its first extensive use within solar physics is by the Sun Earth Connections Coronal and Heliospheric Investigation (SECCHI) telescope suite onboard the Solar Terrestrial Relations Observatory (STEREO). The WCS formalism assists in SECCHI data analysis in several ways: First of all, the spherical effects associated with the extremely wide fields-of-view of the Heliospheric Imager (HI) telescopes can be handled in a completely unambiguous and standard fashion. Of particular importance is that WCS positional keywords allow spacecraft-ephemeris information to be embedded within the FITS header without depending on mission-specific keywords. Ephemeris data is critical to the three-dimensional analysis that the STEREO mission is designed for. We also show how the WCS software in SolarSoft\textsf{SolarSoft} can be used to relate STEREO data to other missions such as the Solar and Heliospheric Observatory (SOHO). The ability of WCS to support a parallel celestial right ascension (R.A.)/declination (Dec) coordinate system and the use of WCS for COR1 synoptic maps are also discussed. The advantages that STEREO derived from WCS can equally be applied to other solar missions, in particular Solar Orbiter, and should be adopted by all future missions.     

What Is the Nature of EUV Waves? First STEREO 3D Observations and Comparison with Theoretical Models

One of the major discoveries of the Extreme ultraviolet Imaging Telescope (EIT) on SOHO was the intensity enhancements propagating over a large fraction of the solar surface. The physical origin(s) of the so-called EIT waves is still strongly debated with either wave (primarily fast-mode MHD waves) or nonwave (pseudo-wave) interpretations. The difficulty in understanding the nature of EUV waves lies in the limitations of the EIT observations that have been used almost exclusively for their study. They suffer from low cadence and single temperature and viewpoint coverage. These limitations are largely overcome by the SECCHI/EUVI observations onboard the STEREO mission. The EUVI telescopes provide high-cadence, simultaneous multitemperature coverage and two well-separated viewpoints. We present here the first detailed analysis of an EUV wave observed by the EUVI disk imagers on 7 December 2007 when the STEREO spacecraft separation was ≈?45°. Both a small flare and a coronal mass ejection (CME) were associated with the wave. We also offer the first comprehensive comparison of the various wave interpretations against the observations. Our major findings are as follows: (1) High-cadence (2.5-minute) 171 Å? images showed a strong association between expanding loops and the wave onset and significant differences in the wave appearance between the two STEREO viewpoints during its early stages; these differences largely disappeared later; (2) the wave appears at the active region periphery when an abrupt disappearance of the expanding loops occurs within an interval of 2.5 minutes; (3) almost simultaneous images at different temperatures showed that the wave was most visible in the 1?–?2 MK range and almost invisible in chromospheric/transition region temperatures; (4) triangulations of the wave indicate it was rather low lying (≈?90 Mm above the surface); (5) forward-fitting of the corresponding CME as seen by the COR1 coronagraphs showed that the projection of the best-fit model on the solar surface was inconsistent with the location and size of the co-temporal EUV wave; and (6) simulations of a fast-mode wave were found in good agreement with the overall shape and location of the observed wave. Our findings give significant support for a fast-mode interpretation of EUV waves and indicate that they are probably triggered by the rapid expansion of the loops associated with the CME.     

The Solar Electron and Proton Telescope Aboard STEREO – Understanding Proton Spectra

The Solar Electron and Proton Telescope (SEPT) aboard the Solar Terrestrial Relations Observatory (STEREO) is designed to provide the three-dimensional distribution of energetic electrons and protons with good energy and time resolution. Each SEPT instrument consists of two double-ended magnet–foil particle telescopes which cleanly separate and measure electrons in the energy range from 30 keV to 400 keV and protons from 60 keV to 7000 keV. Anisotropy information on a non-spinning spacecraft is provided by two separate but identical instruments: SEPT-E aligned along the Parker spiral magnetic field in the ecliptic plane looking both towards and away from the Sun, and SEPT-NS aligned vertical to the ecliptic plane looking towards North and South. The dual set-up refers to two adjacent sensor apertures for each of the four viewing directions SUN, ANTISUN, NORTH, and SOUTH: one for protons, one for electrons. In this contribution a simulation of SEPT utilizing the GEANT4 toolkit has been set up with an extended instrument model in order to calculate improved response functions of the four different telescopes. Here we applied these response functions to quiet-time periods during the minimum between Solar Cycles 23 and 24 (SC-23 and SC-24) when the flux of ions above 10 MeV is dominated by galactic cosmic rays (GCRs). The corresponding spectra are determined by a force-field approximation and used as input for our calculation, leading to good agreement of the computed ion count rates with measurements of SEPT above 400 keV.     

Assessing the Accuracy of CME Speed and Trajectory Estimates from STEREO Observations Through a Comparison of Independent Methods

We have estimated the speed and direction of propagation of a number of Coronal Mass Ejections (CMEs) using single-spacecraft data from the STEREO Heliospheric Imager (HI) wide-field cameras. In general, these values are in good agreement with those predicted by Thernisien, Vourlidas, and Howard in Solar Phys. 256, 111?–?130 (2009) using a forward modelling method to fit CMEs imaged by the STEREO COR2 coronagraphs. The directions of the CMEs predicted by both techniques are in good agreement despite the fact that many of the CMEs under study travel in directions that cause them to fade rapidly in the HI images. The velocities estimated from both techniques are in general agreement although there are some interesting differences that may provide evidence for the influence of the ambient solar wind on the speed of CMEs. The majority of CMEs with a velocity estimated to be below 400 km?s^?1 in the COR2 field of view have higher estimated velocities in the HI field of view, while, conversely, those with COR2 velocities estimated to be above 400 km?s^?1 have lower estimated HI velocities. We interpret this as evidence for the deceleration of fast CMEs and the acceleration of slower CMEs by interaction with the ambient solar wind beyond the COR2 field of view. We also show that the uncertainties in our derived parameters are influenced by the range of elongations over which each CME can be tracked. In order to reduce the uncertainty in the predicted arrival time of a CME at 1 Astronomical Unit (AU) to within six hours, the CME needs to be tracked out to at least 30 degrees elongation. This is in good agreement with predictions of the accuracy of our technique based on Monte Carlo simulations. Within the set of studied CMEs, there are two clear events that were predicted from the HI data to travel over another spacecraft; in-situ measurements at these other spacecraft confirm the accuracy of these predictions. The ability of the HI cameras to image Corotating Interaction Region (CIR)-entrained transients as well as CMEs can result in some ambiguity when trying to distinguishing individual signatures.     

STEREO observations of hybrid stars V775 Tau and V483 Tau

In this study, pulsational and physical characteristics of two \(\delta\) Scuti stars, V775?Tau and V483?Tau, are analysed by using four-year high-precision photometric data of the STEREO satellite. Thus, it is aimed to gain new insights into behaviours of these pulsators and evolution of \(\delta\) Scuti, \(\gamma\) Dor and Am type stars. The data are taken between 2007–2011 and examined with the help of the Lomb–Scargle method. The detection precision in the four-year combined data is around \(10^{-5}\) cd^?1 in frequency and \(10^{-5}\) mag in amplitude. It is revealed that V775?Tau exhibits weak pulsation characteristic which is interpreted as the existence of the interaction between the helium loss in the partial ionization zone and pulsation intensities. It is also considered that the absence of strong pulsations is also related to the evolution status of the star. Further, its periodogram shows low-frequency peaks. If these oscillations are g-modes, V775?Tau can be thought to be one of the rare stars that show all \(\gamma\) Dor, \(\delta\) Scuti and Am type variations. V483?Tau is comparatively more luminous, hotter and has higher rotational velocity. Therefore, although it shares the same region with V775?Tau in the H–R diagram, it is not considered to be an Am star. Yet, it exactly overlaps with the \(\gamma\) Dor stars. These clues as well as g-modes detected in its periodogram indicate that V483?Tau is a hybrid star. Finally, both V775?Tau and V483?Tau display period changes whose rates are between \(10^{-3}\) and \(10^{-4}\) yr^?1. Considering the \(\delta\) Scuti nature, it may be speculated that these changes are non-evolutionary.     

Pre-CME Onset Fuses – Do the STEREO Heliospheric Imagers Hold the Clues to the CME Onset Process?

Understanding the onset of coronal mass ejections (CMEs) is surely one of the holy grails of solar physics today. Inspection of data from the Heliospheric Imagers (HI), which are part of the SECCHI instrument suite aboard the two NASA STEREO spacecraft, appears to have revealed pre-eruption signatures which may provide valuable evidence for identifying the CME onset mechanism. Specifically, an examination of the HI images has revealed narrow rays comprised of a series of outward-propagating plasma blobs apparently forming near the edge of the streamer belt prior to many CME eruptions. In this pilot study, we inspect a limited dataset to explore the significance of this phenomenon, which we have termed a pre-CME ‘fuse’. Although, the enhanced expulsion of blobs may be consistent with an increase in the release of outward-propagating blobs from the streamers themselves, it could also be interpreted as evidence for interchange reconnection in the period leading to a CME onset. Indeed, it is argued that the latter could even have implications for the end-of-life of CMEs. Thus, the presence of these pre-CME fuses provides evidence that the CME onset mechanism is either related to streamer reconnection processes or the reconnection between closed field lines in the streamer belt and adjacent, open field lines. We investigate the nature of these fuses, including their timing and location with respect to CME launch sites, as well as their speed and topology.     

Dust Detection by the Wave Instrument on STEREO: Nanoparticles Picked up by the Solar Wind?

Solar Physics - The STEREO wave instrument (S/WAVES) has detected a very large number of intense voltage pulses. We suggest that these events are produced by impact ionisation of nanoparticles...     

STEREO卫星的CME观测研究进展

简要回顾利用"日地关系天文台"(Solar Terrestrial Relations Observatory,STEREO)卫星的立体观测资料在日冕物质抛射(Coronal Mass Ejection,CME)研究方面已取得的一些重要进展,主要包括(1)通过极紫外成像仪观测到的日冕极紫外暗化来更准确地估计CME质量,研究CME演化的结构特征;(2)利用STEREO卫星日冕仪的双角度观测,在CME立体传播特征方面取得的新进展;(3)STEREO卫星日球成像仪具有广阔的视场范围,可以跟踪研究CME从太阳表面爆发到形成行星际日冕物质抛射(Interplanetary CME,ICME),及其在内日球层和近地空间的演化特征以及运动特征等。同时,也介绍了利用三角测量技术测定CME特征物理量的新方法。     

CME Projection Effects Studied with STEREO/COR and SOHO/LASCO

Based on a set of 11 CME events we study the impact of projection effects by tracking CME leading edge features in the plane of sky (traditional CME tracking) from combined STEREO-SECCHI and SOHO-LASCO observations up to 20R _⊙. By using CME observations from two vantage points and applying triangulation techniques, the source region location of the CME on the solar surface was determined (heliospheric longitude and latitude) to correct for projection effects. With this information, the directivity and “true” speed of a CME can be estimated in a simple way. The comparison of the results obtained from the spacecraft pairs SOHO-LASCO/STEREO-A and SOHO-LASCO/STEREO-B allows us to study the reliability of the method. The determined CME source region is generally coincident within ?10°.     

Study of CME Propagation in the Inner Heliosphere: SOHO LASCO, SMEI and STEREO HI Observations of the January 2007 Events

We are investigating the geometric and kinematic characteristics of interplanetary coronal mass ejections (ICMEs) using data obtained by the LASCO coronagraphs, the Solar Mass Ejection Imager (SMEI), and the SECCHI imaging experiments on the STEREO spacecraft. The early evolution of CMEs can be tracked by the LASCO C2 and C3 and SECCHI COR1 and COR2 coronagraphs, and the HI and SMEI instruments can track their ICME counterparts through the inner heliosphere. The HI fields of view (4?–?90°) overlap with the SMEI field of view (>?20° to all sky) and, thus, both instrument sets can observe the same ICME. In this paper we present results for ICMEs observed on 24?–?29 January 2007, when the STEREO spacecraft were still near Earth so that both the SMEI and STEREO views of large ICMEs in the inner heliosphere coincided. These results include measurements of the structural and kinematic evolution of two ICMEs and comparisons with drive/drag kinematic, 3D tomographic reconstruction, the HAFv2 kinematic, and the ENLIL MHD models. We find it encouraging that the four model runs generally were in agreement on both the kinematic evolution and appearance of the events. Because it is essential to understand the effects of projection across large distances, that are not generally crucial for events observed closer to the Sun, we discuss our analysis procedure in some detail.     

Observations of ICMEs and ICME-like Solar Wind Structures from 2007 – 2010 Using Near-Earth and STEREO Observations

Solar Physics - The generally low interplanetary magnetic field magnitude around the minimum between Solar Cycles 23 and 24 (SC 23/24 minimum) allows us to identify weak and small solar wind...     

Transient Structures and Stream Interaction Regions in the Solar Wind: Results from EISCAT Interplanetary Scintillation, STEREO HI and Venus Express ASPERA-4 Measurements

We discuss the detection and evolution of a complex series of transient and quasi-static solar-wind structures in the days following the well-known comet 2P/Encke tail disconnection event in April 2007. The evolution of transient solar-wind structures ranging in size from <10⁵ km to >10⁶ km was characterised using one-minute time resolution observation of Interplanetary Scintillation (IPS) made using the European Incoherent SCATter (EISCAT) radar system. Simultaneously, the global structure and evolution of these features was characterised by the Heliospheric Imagers (HI) on the Solar TERrestrial RElations Observatory (STEREO) spacecraft, placing the IPS observations in context. Of particular interest was the observation of one transient in the slow wind, apparently being swept up and entrained by a Stream Interaction Region (SIR). The SIR itself was later detected in-situ at Venus by the Analyser of Space Plasma and Energetic Atoms (ASPERA-4) instrument on the Venus Express (VEX) spacecraft. The availability of such diverse data sources over a range of different time resolutions enables us to develop a global picture of these complex events that would not have been possible if these instruments were used in isolation. We suggest that the range of solar-wind transients discussed here may be the interplanetary counterparts of transient structures previously reported from coronagraph observations and are likely to correspond to transient magnetic structures reported in in-situ measurements in interplanetary space. The results reported here also provide the first indication of heliocentric distances at which transients become entrained.     

Temperature Response of the 171 Å Passband of the SWAP Imager on PROBA2, with a Comparison to TRACE, SOHO, STEREO, and SDO

We calculated the temperature response of the 171 Å passbands of the Sun Watcher using APS detectors and image Processing (SWAP) instrument onboard the PRoject for OnBoard Autonomy 2 (PROBA2) satellite. These results were compared to the temperature responses of the Extreme Ultraviolet Imaging Telescope (EIT) onboard the Solar and Heliospheric Observatory (SOHO), the Transition Region and Coronal Explorer (TRACE), the twin Extreme Ultraviolet Imagers (EUVI) onboard the Solar TErrestrial RElations Observatory (STEREO) A and B spacecraft, and the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO). Multiplying the wavelength-response functions for each instrument by a series of isothermal synthetic spectra and integrating over the range 165?–?195 Å produced temperature-response functions for the six instruments. Each temperature response was then multiplied by sample differential emission-measure functions for four different solar conditions. For any given plasma condition (e.g. quiet Sun, active region), it was found that the overall variation with temperature agreed remarkably well across the six instruments, although the wavelength responses for each instrument have some distinctly different features. Deviations were observed, however, when we compared the response of any one instrument to different solar conditions, particularly for the case of solar flares.     

Low-Resolution STELab IPS 3D Reconstructions of the Whole Heliosphere Interval and Comparison with in-Ecliptic Solar Wind Measurements from STEREO and Wind Instrumentation

We present initial 3D tomographic reconstructions of the inner heliosphere during the Whole Heliosphere Interval (WHI) – Carrington Rotation 2068 (CR2068) – using Solar-Terrestrial Environment Laboratory (STELab) Interplanetary Scintillation (IPS) observations. Such observations have been used for over a decade to visualise and investigate the structure of the solar wind and to study in detail its various features. These features include co-rotating structures as well as transient structures moving out from the Sun. We present global reconstructions of the structure of the inner heliosphere during this time, and compare density and radial velocity with multi-point in situ spacecraft measurements in the ecliptic; namely STEREO and Wind data, as the interplanetary medium passes over the spacecraft locations.     

STEREO搜寻地球附近古老行星的遗迹

很多人都很熟悉SOHO——“太阳和太阳风层探测器”对太阳研究的贡献真不小。作为副产品,还发现了数百颗“SOHO彗星”,其中包括我们中国的天文爱好者不小的贡献! 可是,要说起STEREO,知道的人可能就不多了。     

STEREO/SECCHI Observations on 8 December 2007: Evidence Against the Wave Hypothesis of the EIT Wave Origin

Three-dimensional (3D) tomographic analysis of extreme ultraviolet (EUV) images is used to place empirical constraints on the corona’s temperature and density structure. The input data are images taken by the EUVI instrument on STEREO A and B spacecraft for Carrington Rotation 2069 (16 April to 13 May 2008). While the reconstructions are global, we demonstrate the capabilities of this method by examining specific structures in detail. Of particular importance are the results for coronal cavities and the surrounding helmet streamers, which our method allows to be analyzed without projection effects for the first time. During this rotation, both the northern and southern hemispheres exhibited stable polar crown filaments with overlying EUV cavities. These filaments and cavities were too low-lying to be well observed in white-light coronagraphs. Furthermore, due to projection effects, these cavities were not clearly discernible above the limb in EUV images, thus tomography offers the only option to study their plasma properties quantitatively. It is shown that, when compared to the surrounding helmet material, these cavities have lower densities (about 30%, on average) and broader local differential emission measures that are shifted to higher temperatures than the surrounding streamer plasma.     

Solar – Terrestrial Simulation in the STEREO Era: The 24 – 25 January 2007 Eruptions

The SECCHI instruments aboard the recently launched STEREO spacecraft enable for the first time the continuous tracking of coronal mass ejections (CMEs) from the Sun to 1 AU. We analyze line-of-sight observations of the 24?–?25 January 2007 CMEs and fill the 20-hour gap in SECCHI coverage in 25 January by performing a numerical simulation using a three-dimensional magneto-hydrodynamic (MHD) code, the Space Weather Modeling Framework (SWMF). We show how the observations reflect the interaction of the two successive CMEs with each other and with the structured solar wind. We make a detailed comparison between the observations and synthetic images from our model, including time-elongation maps for several position angles. Having numerical simulations to disentangle observational from physical effects, we are able to study the three-dimensional nature of the ejections and their evolution in the inner heliosphere. This study reflects the start of a new era where, on one hand, models of CME propagation and interaction can be fully tested by using heliospheric observations and, on the other hand, observations can be better interpreted by using global numerical models.