Geology and genesis of the post-collisional porphyry–skarn deposit at Bangpu,Tibet

Bangpu deposit in Tibet is a large but poorly studied Mo-rich (~ 0.089 wt.%), and Cu-poor (~ 0.32 wt.%) porphyry deposit that formed in a post-collisional tectonic setting. The deposit is located in the Gangdese porphyry copper belt (GPCB), and formed at the same time (~ 15.32 Ma) as other deposits within the belt (12 ~ 18 Ma), although it is located further to the north and has a different ore assemblage (Mo–Pb–Zn–Cu) compared to other porphyry deposits (Cu–Mo) in this belt. Two distinct mineralization events have been identified in the Bangpu deposit which are porphyry Mo–(Cu) and skarn Pb–Zn mineralization. Porphyry Mo–(Cu) mineralization in the deposit is generally associated with a mid-Miocene porphyritic monzogranite rock, whereas skarn Pb–Zn mineralization is hosted by lower Permian limestone–clastic sequences. Coprecipitated pyrite and sphalerite from the Bangpu skarn yield a Rb–Sr isochron age of 13.9 ± 0.9 Ma. In addition, the account of garnet decreases and the account of both calcite and other carbonate minerals increases with distance from the porphyritic monzogranite, suggesting that the two distinct phases of mineralization in this deposit are part of the same metallogenic event.Four main magmatic units are associated with the Bangpu deposit, namely a Paleogene biotite monzogranite, and Miocene porphyritic monzogranite, diabase, and fine-grained diorite units. These units have zircon U–Pb ages of 62.24 ± 0.32, 14.63 ± 0.25, 14.46 ± 0.38, and 13.24 ± 0.04 Ma, respectively. Zircons from porphyritic monzogranite yield ε_Hf(t) values of 2.2–8.7, with an average of 5.4, whereas the associated diabase has a similar ε_Hf(t) value averaging at 4.7. The geochemistry of the Miocene intrusions at Bangpu suggests that they were derived from different sources. The porphyritic monzogranite has relatively higher heavy rare earth element (HREE) concentrations than do other ore-bearing porphyries in the GPCB and plots closer to the amphibolite lithofacies field in Y–Zr/Sm and Y–Sm/Yb diagrams. The Bangpu diabase contains high contents of MgO (> 7.92 wt.%), FeOt (> 8.03 wt.%) but low K₂O (< 0.22 wt.%) contents and with little fractionation of the rare earth elements (REEs), yielding shallow slopes on chondrite-normalized variation diagrams. These data indicate that the mineralized porphyritic monzogranite was generated by partial melting of a thickened ancient lower crust with some mantle components, whereas the diabase intrusion was directly derived from melting of upwelling asthenospheric mantle. An ancient lower crustal source for ore-forming porphyritic monzogranite explains why the Bangpu deposit is Mo-rich and Cu-poor rather than the Cu–Mo association in other porphyry deposits in the GPCB because Mo is dominantly from the ancient crust.The Bangpu deposit has alteration zonation, ranging from an inner zone of biotite alteration through silicified and phyllic alteration zones to an outer propylitic alteration zone, similar to typical porphyry deposits. Some distinct differences are also present, for example, K-feldspar alteration at Bangpu is so dispersed that a distinct zone of K-feldspar alteration has not been identified. Hypogene mineralization at Bangpu is characterized by the early-stage precipitation of chalcopyrite during biotite alteration and the late-stage deposition of molybdenite during silicification. Fluid inclusion microthermometry indicates a change in ore-forming fluids from high-temperature (320 °C–550 °C) and high-salinity (17 wt.%–67.2 wt.%) fluids to low-temperature (213 °C–450 °C) and low-salinity (7.3 wt.%–11.6 wt.%) fluids. The deposit has lower δD_V-SMOW (− 107.1‰ to − 185.8‰) values compared with other porphyry deposits in the GPCB, suggesting that the Bangpu deposit formed in a shallower setting and is associated with a more open system than is the case for other deposits in this belt. Sulfides at Bangpu yield δ³⁴S_V-CDT values of − 2.3‰ to 0.3‰, indicative of mantle-derived S implying that coeval mantle-derived mafic magma (e.g., diabase) simultaneously supplied S and Cu to the porphyry system at Bangpu. In comparison, the Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.79–19.28, ²⁰⁷Pb/²⁰⁴Pb = 15.64–15.93, ²⁰⁸Pb/²⁰⁴Pb = 39.16–40.45) of sulfides show that other metals (e.g., Mo, Pb, Zn) were likely derived mainly from an ancient crustal source. Therefore, the formation of the Bangpu deposit can be explained by a two-stage model involving (1) the partial melting of an ancient lower crust triggered by invasion of asthenospheric mantle-derived mafic melts that provide heat and metal Cu and (2) the formation of the Bangpu porphyry Mo–Cu system, formed by magmatic differentiation in the overriding crust in a post-collisional setting.     

Geology and genesis of Kafang Cu–Sn deposit,Gejiu district,SW China

Kafang is one of the main ore deposits in the world-class Gejiu polymetallic tin district, SW China. There are three main mineralization types in the Kafang deposit, i.e., skarn Cu–Sn ores, stratiform Cu ores hosted by basalt and stratiform Cu–Sn ores hosted by carbonate. The skarn mainly consists of garnet and pyroxene, and retrograde altered rocks. These retrograde altered rocks are superimposed on the skarn and are composed of actinolite, chlorite, epidote and phlogopite. Major ore minerals are chalcopyrite, pyrrhotite, cassiterite, pyrite and scheelite. Sulfur and Pb isotopic components hint that the sources of different types of mineralization are distinctive, and indicate that the skarn ore mainly originated from granitic magma, whereas the basalt-hosted Cu ores mainly derived from basalt. Microthermometry results of fluid inclusions display a gradual change during the ore-forming process. The homogenization temperature of different types of inclusions continuously decreases from early to late mineralization stages. The salinities and freezing temperatures exhibit similar evolutionary tendencies with the T _{homogenization}, while the densities of the different types keep constant, the majority being less than 1. Oxygen and hydrogen isotopic values (δ¹⁸O and δD) of the hydrothermal fluids fall within ranges of 3.1 to 7.7‰ with an average of 6.15‰, calculated at the corresponding homogenization temperature, and − 73 and − 98‰ with an average of − 86.5‰, respectively. Microthermometry data and H–O isotopes indicate that the ore-forming fluid of the Kafang deposit is mainly derived from magma in the early stage and a mixture of meteoric and magmatic water in late stage. Molybdenite Re–Os age of the skarn type mineralization is 83.4 ± 2.1 Ma, and the stratiform ores hosted by basalt is 84.2 ± 7.3 Ma, which are consistent with the LA-ICP-MS zircon age of the Xinshan granite intrusion (83.1 ± 0.4 Ma). The evidence listed above reflects the fact that different ore styles in the Kafang deposit belong to the same mineralization system.     

Geology,isotope geochemistry and ore genesis of the Shanshulin carbonate-hosted Pb–Zn deposit,southwest China

The Shanshulin Pb–Zn deposit occurs in Upper Carboniferous Huanglong Formation dolomitic limestone and dolostone, and is located in the western Yangtze Block, about 270 km west of Guiyang city in southwest China. Ore bodies occur along high angle thrust faults affiliated to the Weishui regional fault zone and within the northwestern part of the Guanyinshan anticline. Sulfide ores are composed of sphalerite, pyrite, and galena that are accompanied by calcite and subordinate dolomite. Twenty-two ore bodies have been found in the Shanshulin deposit area, with a combined 2.7 million tonnes of sulfide ores grading 0.54 to 8.94 wt.% Pb and 1.09 to 26.64 wt.% Zn. Calcite samples have δ¹³C_PDB and δ¹⁸O_SMOW values ranging from − 3.1 to + 2.5‰ and + 18.8 to + 26.5‰, respectively. These values are higher than mantle and sedimentary organic matter, but are similar to marine carbonate rocks in a δ¹³C_PDB vs. δ¹⁸O_SMOW diagram, suggesting that carbon in the hydrothermal fluid was most likely derived from the carbonate country rocks. The δ³⁴S_CDT values of sphalerite and galena samples range from + 18.9 to + 20.3‰ and + 15.6 to + 17.1‰, respectively. These values suggest that evaporites are the most probable source of sulfur. The δ³⁴S_CDT values of symbiotic sphalerite–galena mineral pairs indicate that deposition of sulfides took place under chemical equilibrium conditions. Calculated temperatures of S isotope thermodynamic equilibrium fractionation based on sphalerite–galena mineral pairs range from 135 to 292 °C, consistent with previous fluid inclusion studies. Temperatures above 100 °C preclude derivation of sulfur through bacterial sulfate reduction (BSR) and suggest that reduced sulfur in the hydrothermal fluid was most likely supplied through thermo-chemical sulfate reduction (TSR). Twelve sphalerite samples have δ⁶⁶Zn values ranging from 0.00 to + 0.55‰ (mean + 0.25‰) relative to the JMC 3-0749L zinc isotope standard. Stages I to III sphalerite samples have δ⁶⁶Zn values ranging from 0.00 to + 0.07‰, + 0.12 to + 0.23‰, and + 0.29 to + 0.55‰, respectively, showing the relatively heavier Zn isotopic compositions in later versus earlier sphalerite. The variations of Zn isotope values are likely due to kinetic Raleigh fractional crystallization. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of the sulfide samples fall in the range of 18.362 to 18.573, 15.505 to 15.769 and 38.302 to 39.223, respectively. The Pb isotopic ratios of the studied deposit plot in the field that covers the upper crust, orogenic belt and mantle Pb evolution curves and overlaps with the age-corrected Proterozoic folded basement rocks, Devonian to Lower Permian sedimentary rocks and Middle Permian Emeishan flood basalts in a ²⁰⁷Pb/²⁰⁴Pb vs. ²⁰⁶Pb/²⁰⁴Pb diagram. This observation points to the derivation of Pb metal from mixed sources. Sphalerite samples have ⁸⁷Sr/⁸⁶Sr_200 Ma ratios ranging from 0.7107 to 0.7115 similar to the age-corrected Devonian to Lower Permian sedimentary rocks (0.7073 to 0.7111), higher than the age-corrected Middle Permian basalts (0.7039 to 0.7078), and lower than the age-corrected Proterozoic folded basement (0.7243 to 0.7288). Therefore, the Sr isotope data support a mixed source. Studies on the geology and isotope geochemistry suggest that the Shanshulin deposit is a carbonate-hosted, thrust fault-controlled, strata-bound, epigenetic, high grade deposit formed by fluids and metals of mixed origin.     

Geology,geochemistry, and geochronology of the Wangjiazhuang porphyry–breccia Cu(–Mo) deposit in the Zouping volcanic basin,eastern North China Block

The Wangjiazhuang porphyry–breccia Cu(–Mo) deposit is located in the Zouping volcanic basin, western Shandong Province. Seven molybdenite samples yield a Re–Os weighted mean age of 127.8 ± 0.7 Ma (2σ), which is identical within error to the zircon weighted mean ²⁰⁶Pb/²³⁸U age of 128.3 ± 1.3 Ma (2σ) determined for quartz monzonite samples. The host rock is characterized by high concentrations of K₂O (4.26–4.53 wt.%), Na₂O (4.97–5.76 wt.%), LILEs and LREEs, and high Mg# (> 40), and low concentrations of HFSEs and HREEs, with K₂O/Na₂O ratios of 0.76–0.88. The quartz monzonite also has high Sr/Y (69.9–112.5) and (La/Yb)_N (22.0–30.0) ratios, similar to adakitic rocks worldwide. Relatively low initial ⁸⁷Sr/⁸⁶Sr ratios (0.70549–0.70556), high ε_Nd(t) values (2.58–3.06), high radiogenic Pb [(²⁰⁶Pb/²⁰⁴Pb)i = 18.3424–18.4606, (²⁰⁷Pb/²⁰⁴Pb)_i = 15.5692–15.5985, (²⁰⁸Pb/²⁰⁴Pb)_i = 38.1714–38.2734] and high zircon ε_Hf(t) values (− 2.1 to + 4.3) indicate that the magma was likely derived from the partial melting of subducted oceanic crust which then reacted with the peridotitic mantle wedge. Both the breccia and porphyry ores have a narrow range of δ³⁴S (− 4.8 to + 2.1‰) and Pb isotopic compositions (²⁰⁶Pb/²⁰⁴Pb = 18.295–18.402, ²⁰⁷Pb/²⁰⁴Pb = 15.551–15.573, and ²⁰⁸Pb/²⁰⁴Pb = 38.215–38.331), suggesting that the ore metals were extracted primarily from the quartz monzonite or similar source. Subduction of the Paleo-Pacific slab during the Early Cretaceous resulted in the formation of the Wangjiazhuang quartz monzonite and associated Cu(–Mo) deposit in western Shandong Province.     

Formation of the Vysoká–Zlatno Cu–Au skarn–porphyry deposit, Slovakia

The central zone of the Miocene Štiavnica stratovolcano hosts several occurrences of Cu–Au skarn–porphyry mineralisation, related to granodiorite/quartz–diorite porphyry dyke clusters and stocks. Vysoká–Zlatno is the largest deposit (13.4 Mt at 0.52% Cu), with mineralised Mg–Ca exo- and endoskarns, developed at the prevolcanic basement level. The alteration pattern includes an internal K- and Na–Ca silicate zone, surrounded by phyllic and argillic zones, laterally grading into a propylitic zone. Fluid inclusions in quartz veinlets in the internal zone contain mostly saline brines with 31–70 wt.% NaCl eq. and temperatures of liquid–vapour homogenization (Th) of 186–575°C, indicating fluid heterogenisation. Garnet contains inclusions of variable salinity with 1–31 wt.% NaCl eq. and Th of 320–360°C. Quartz–chalcopyrite veinlets host mostly low-salinity fluid inclusions with 0–3 wt.% NaCl eq. and Th of 323–364°C. Data from sphalerite from the margin of the system indicate mixing with dilute and cooler fluids. The isotopic composition of fluids in equilibrium with K-alteration and most skarn minerals (both prograde and retrograde) indicates predominantly a magmatic origin (δ¹⁸O_fluid 2.5–12.3‰) with a minor meteoric component. Corresponding low δD_fluid values are probably related to isotopic fractionation during exsolution of the fluid from crystallising magma in an open system. The data suggest the general pattern of a distant source of magmatic fluids that ascended above a zone of hydraulic fracturing below the temperature of ductile–brittle transition. The magma chamber at ∼5–6 km depth exsolved single-phase fluids, whose properties were controlled by changing PT conditions along their fluid paths. During early stages, ascending fluids display liquid–vapour immiscibility, followed by physical separation of both phases. Low-salinity liquid associated with ore veinlets probably represents a single-phase magmatic fluid/magmatic vapour which contracted into liquid upon its ascent.     

Geology,fluid inclusion and isotope constraints on ore genesis of the post-collisional Dabu porphyry Cu–Mo deposit,southern Tibet

The Dabu Cu-Mo porphyry deposit is situated in the southern part of the Lhasa terrane within the post-collisional Gangdese porphyry copper belt (GPCB). It is one of several deposits that include the Qulong and Zhunuo porphyry deposits. The processes responsible for ore formation in the Dabu deposit can be divided into three stages of veining: stage I, quartz–K-feldspar (biotite) ± chalcopyrite ± pyrite, stage II, quartz–molybdenite ± pyrite ± chalcopyrite, and stage III, quartz–pyrite ± molybdenite. Three types of fluid inclusions (FIs) are present: liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), and solid bearing multi-phase (S-type) inclusions. The homogenization temperatures for the FIs from stages I to III are in the ranges of 272–475 °C, 244–486 °C, and 299–399 °C, and their salinities vary from 2.1 to 49.1, 1.1 to 55.8, and 2.9 to 18.0 wt% NaCl equiv., respectively. The coexistence of S-type, V-type and L-type FIs in quartz of stage I and II with similar homogenization temperatures but contrasting salinities, indicate that fluid boiling is the major factor controlling metal precipitation in the Dabu deposit. The ore-forming fluids of this deposit are characterized by high temperature and high salinity, and they belong to a H₂O–NaCl magmatic–hydrothermal system. The H–O–S–Pb isotopic compositions indicate that the ore metals and fluids came primarily from a magmatic source linked to Miocene intrusions characterized by high Sr/Y ratios, similar to other porphyry deposits in the GPCB. The fluids forming the Dabu deposit were rich in Na and Cl, derived from metamorphic dehydration of subducted oceanic slab through which NaCl-brine or seawater had percolated. The inheritance of ancient subduction-associated arc chemistry, without shallow level crustal assimilation and/or input of the meteoric water, was responsible for the generation of fertile magma, as well as CO₂-poor and halite-bearing FIs associated with post-collisional porphyry deposits. The estimated mineralization depths of Qulong, Dabu and Zhunuo deposits are 1.6–4.3 km, 0.5–3.4 km and 0.2–3.0 km, respectively, displaying a gradual decrease from eastern to western Gangdese. Deep ore-forming processes accounted for the generation of giant-sized Qulong deposit, because the exsolution of aqueous fluids with large fraction of water and chlorine in deep or high pressure systems can extract more copper from melts than those formed in shallow systems. However, the formation of small-sized Dabu deposit can be explained by a single magmatic event without additional replenishment of S, metal, or thermal energy. In addition, the ore-forming conditions of porphyry Cu–Mo deposits in GPCB are comparable to those of porphyry Cu ± Au ± Mo deposits formed in oceanic subduction-related continental or island arcs, but differ from those of porphyry Mo deposit formed in the Dabie-Qinling collisional orogens. The depth of formation of the mineralization and features of primary magma source are two major controls on the metal types and ore-fluid compositions of these porphyry deposits.     

Origin of the Tongshankou porphyry–skarn Cu–Mo deposit,eastern Yangtze craton,Eastern China: geochronological,geochemical, and Sr–Nd–Hf isotopic constraints

The Tongshankou Cu–Mo deposit, located in the westernmost Daye district of the Late Mesozoic Metallogenic Belt along the Middle-Lower reaches of the Yangtze River, eastern China, consists mainly of porphyry and skarn ores hosted in the Tongshankou granodiorite and along the contact with the Lower Triassic marine carbonates, respectively. Sensitive high-resolution ion microprobe zircon U–Pb dating constrains the crystallization of the granodiorite at 140.6 ± 2.4 Ma (1σ). Six molybdenite samples from the porphyry ores yield Re–Os isochron age of 143.8 ± 2.6 Ma (2σ), while a phlogopite sample from the skarn ores yields an ⁴⁰Ar/³⁹Ar plateau age of 143.0 ± 0.3 Ma and an isochron age of 143.8 ± 0.8 Ma (2σ), indicating an earliest Cretaceous mineralization event. The Tongshankou granodiorite has geochemical features resembling slab-derived adakites, such as high Sr (740–1,300 ppm) and enrichment in light rare earth elements (REE), low Sc (<10 ppm), Y (<13.3 ppm), and depletion in heavy REE (<1.2 ppm Yb), and resultant high Sr/Y (60–92) and La/Yb (26–75) ratios. However, they differ from typical subduction-related adakites by high K, low MgO and Mg#, and radiogenic Sr–Nd–Hf isotopic compositions, with (⁸⁷Sr/⁸⁶Sr) _t  = 0.7062–0.7067, ɛ _Nd(t) = −4.37 to −4.63, (¹⁷⁶Hf/¹⁷⁷Hf) _t  = 0.282469–0.282590, and ɛ _Hf(t) = −3.3 to −7.6. The geochemical and isotopic data, coupled with geological analysis, indicate that the Tongshankou granodiorite was most likely generated by partial melting of enriched lithospheric mantle that was previously metasomitized by slab melts related to an ancient subduction system. Magmas derived from such a source could have acquired a high oxidation state, as indicated by the assemblage of quartz–magnetite–titanite–amphibole–Mg-rich biotite in the Tongshankou granodiorite and the compositions of magmatic biotite that fall in the field between the NiNiO and magnetite–hematite buffers in the Fe³⁺–Fe²⁺–Mg diagram. Sulfur would have been present as sulfates in such highly oxidized magmas, so that chalcophile elements Cu and Mo were retained as incompatible elements in the melt, contributing to subsequent mineralization. A compilation of existing data reveals that porphyry and porphyry-related Cu–Fe–Au–Mo mineralization from Daye and other districts of the Metallogenic Belt along the Middle-Lower reaches of the Yangtze River took place coevally in the Early Cretaceous and was related to an intracontinental extensional environment, distinctly different from the arc-compressive setting of the Cenozoic age that has been responsible for the emplacement of most porphyry Cu deposits of the Pacific Rim.     

Metallogeny of the Handagai skarn Fe–Cu deposit,northern Great Xing'an Range,NE China: Constraints on fluid inclusions and skarn genesis

The newly discovered Handagai skarn Fe–Cu deposit is located in the northern Great Xing'an Range of NE China and is hosted by the Ordovician Luohe Formation. The orebodies that form the deposit are generally concordant with the bedding within these sediments, and are spatially related to areas of skarn development. The Fe–Cu mineralization in this area records four stages of paragenesis, namely prograde skarn, retrograde skarn, quartz–sulfide, and quartz–carbonate stages. The Handagai deposit is a calcic skarn that is dominated by an andradite–diopside–epidote–actinolite assemblage. The mineralogy and geochemistry of the skarn indicate that it formed from a hydrothermal fluid that altered the carbonate units in this area to a garnet (And_42–95Grs_4–53) and pyroxene (Di_71–78Hd_22–29Jo_0–2) bearing skarn. The epidote within the skarn has an epidote end-member composition, with the chlorite in the skarn dominantly Fe-rich, indicating that these minerals formed in an Fe-rich environment. The petrographic, microthermometric, and Raman spectroscopic analysis of fluid inclusions within garnet, epidote, actinolite, quartz, and calcite precipitated at different stages of formation of the Handagai deposit indicate that mineralization-related fluid inclusions are either liquid-rich two-phase H₂O–NaCl (type I), gas-rich two-phase H₂O–NaCl (type II), three-phase (liquid + vapor + solid) H₂O–NaCl (type III), or CO₂–H₂O–NaCl inclusions (type IV). The early stages of mineralization are associated with all four types of inclusion, whereas the later stages of mineralization are only associated with type I and II inclusions. Inclusion homogenization temperatures vary between the four stages of mineralization (370 °C–530 °C and > 600 °C, 210 °C–290 °C, 190 °C–270 °C, and 150 °C–230 °C, from early to late, respectively), with salinities also varying between the earlier and later stages of mineralization (11–18 and > 45, 7–15, 6–9, and 3–7 wt.% NaCl equivalent (equiv.), respectively). The majority of the inclusions within the Handagai deposit have homogenization temperatures and salinities of 200 °C–350 °C and 4–14 wt.% NaCl equiv., respectively, indicating that this is a medium–high temperature and medium–low salinity type deposit. The fluid inclusions were trapped at pressures of 11 to 72 MPa, corresponding to depths of 0.4 to 2.9 km. The geology, mineralogy, geochemistry, and fluid inclusions microthermometry indicate that the Handagai deposit formed as a result of contact infiltration metasomatism, with the deposition of ore minerals resulting from a combination of factors that include boiling as a result of reduced pressure, cooling, and fluid mixing.     

Geology,C–H–O–S–Pb isotope systematics and geochronology of the Yindongpo gold deposit,Tongbai Mountains,central China: Implication for ore genesis

The Yindongpo gold deposit is located in the Weishancheng Au–Ag-dominated polymetallic ore belt in Tongbai Mountains, central China. The ore bodies are stratabound within carbonaceous quartz–sericite schists of the Neoproterozoic Waitoushan Group. The ore-forming process can be divided into three stages, represented by early barren quartz veins, middle polymetallic sulfide veinlets and late quartz–carbonate stockworks, with most ore minerals, such as pyrite, galena, native gold and electrum being formed in the middle stage. The average δ¹⁸O_water values changed from 9.7‰ in the early stage, through 4.9‰ in the middle stage, to − 5.9‰ in the late stage, with the δD values ranging between − 65‰ and − 84‰. The δ¹³C_CO2 values of ore fluids are between − 3.7‰ and + 6.7‰, with an average of 1.1‰. The H–O–C isotope systematics indicate that the ore fluids forming the Yindongpo gold deposit were probably initially sourced from a process of metamorphic devolatilization, and with time gradually mixed with meteoric water. The δ³⁴S values range from − 0.3‰ to + 5.2‰, with peaks ranging from + 1‰ to + 4‰. Fourteen sulfide samples yield ²⁰⁶Pb/²⁰⁴Pb values of 16.990–17.216, ²⁰⁷Pb/²⁰⁴Pb of 15.419–15.612 and²⁰⁸Pb/²⁰⁴Pb of 38.251–38.861. Both S and Pb isotope ratios are similar to those of the main lithologies of the Waitoushan Group, but differ from other lithologic units and granitic batholiths in the Tongbai area, which suggest that the ore metals and fluids originated from the Waitoushan Group. The available K–Ar and ⁴⁰Ar/³⁹Ar ages indicate that the ore-forming process mainly took place in the period of 176–140 Ma, during the transition from collisional compression to extension and after the closure of the oceanic seaway in the Qinling Orogen. The Yindongpo gold deposit is interpreted as a stratabound orogenic-style gold system formed during the transition phase from collisional compression to extension.The ore metals in the Waitoushan Group were extracted, transported and then accumulated in the carbonaceous sericite schist layer. The carbonaceous sericite schist layer, especially at the junction of collapsed anticline axis and fault structures, became the most favorable locus for the ore bodies.     

Geochronology and fluid inclusion study of the Yinjiagou porphyry–skarn Mo–Cu–pyrite deposit in the East Qinling orogenic belt,China

The Yinjiagou Mo–Cu–pyrite deposit of Henan Province is located in the Huaxiong block on the southern margin of the North China craton. It differs from other Mo deposits in the East Qingling area because of its large pyrite resource and complex associated elements. The deposit’s mineralization process can be divided into skarn, sulfide, and supergene episodes with five stages, marking formation of magnetite in the skarn episode, quartz–molybdenite, quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite, and calcite–galena–sphalerite in the sulfide episode, and chalcedony–limonite in the supergene episode. Re–Os and ⁴⁰Ar–³⁹Ar dating indicates that both the skarn-type and porphyry-type orebodies of the Yinjiagou deposit formed approximately 143 Ma ago during the Early Cretaceous. Four types of fluid inclusions (FIs) have been distinguished in quartz phenocryst, various quartz veins, and calcite vein. Based on petrographic observations and microthermometric criteria the FIs include liquid-rich, gas-rich, H₂O–CO₂, and daughter mineral-bearing inclusions. The homogenization temperature of FIs in quartz phenocrysts of K-feldspar granite porphyry ranges from 341 °C to >550 °C, and the salinity is 0.4–44.0 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite veins is 382–416 °C, and the salinity is 3.6–40.8 wt% NaCl eqv. The homogenization temperature of FIs in quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite ranges from 318 °C to 436 °C, and the salinity is 5.6–42.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite stockworks is in a range of 321–411 °C, and the salinity is 6.3–16.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–sericite–pyrite is in a range of 326–419 °C, and the salinity is 4.7–49.4 wt% NaCl eqv. The ore-forming fluids of the Yinjiagou deposit are mainly high-temperature, high-salinity fluids, generally with affinities to an H₂O–NaCl–KCl ± CO₂ system. The δ¹⁸O_H2O values of ore-forming hydrothermal fluids are 4.0–8.6‰, and the δD_V-SMOW values are between −64‰ and −52‰, indicating that the ore-forming fluids were primarily magmatic. The δ³⁴S_V-CDT values of sulfides range between −0.2‰ and 6.3‰ with a mean of 1.6‰, sharing similar features with deeply sourced sulfur, implying that the sulfur mainly came from the lower crust composed of poorly differentiated igneous materials, but part of the heavy sulfur came from the Guandaokou Group dolostone. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb values of sulfides are in the range of 17.331–18.043, 15.444–15.575, and 37.783–38.236, respectively, which is generally consistent with the Pb isotopic signature of the Yinjiagou intrusion, suggesting that the Pb chiefly originated from the felsic–intermediate intrusive rocks in the mine area, with a small amount of lead from strata. The Yinjiagou deposit is a porphyry–skarn deposit formed during the Mesozoic transition of a tectonic regime that is EW-trending to NNE-trending, and the multiepisode boiling of ore-forming fluids was the primary mechanism for mineral deposition.     

In-situ LA–ICP–MS U–Pb geochronology and trace elements analysis of polygenetic titanite from the giant Beiya gold–polymetallic deposit in Yunnan Province,Southwest China

The Beiya gold–polymetallic deposit, located in the middle of the Jinshajiang–Ailaoshan alkaline porphyry metallogenic belt, is one of the largest gold deposits in China. The mineralization mainly occurs in skarn along the intrusive contacts between the alkaline porphyries and Middle Triassic limestone. In this paper, we present U–Pb age as well as major and trace element geochemistry of titanite from the Beiya deposit, and distinguish the titanite into a magmatic- and a hydrothermal suite. Our study indicates that the titanite from the ore-related porphyry and from the mineralized skarn is texturally and geochemically very different. The euhedral, envelope-shaped titanite from the ore-related porphyry has lower FeO, F, HFSEs, Nb/Ta and Lu/Hf, together with higher TiO₂ and Th/U than the subhedral titanite from the mineralized skarn. The titanite from the porphyry also displays higher LREE/HREE and more subtle negative Eu anomaly than its mineralized skarn counterpart. This suggests a magmatic- and a hydrothermal origin for, respectively, the titanite from the ore-related porphyry and from the mineralized skarn. In-situ magmatic titanite U–Pb dating has yielded an Eocene age of 36.0 ± 5.9 Ma, consistent with the porphyry zircon U–Pb age (36.07 ± 0.43 Ma) obtained in previous studies. Hydrothermal titanite has yielded a weighted average ²⁰⁶Pb/²³⁸U age of 33.1 ± 1.0 Ma (MSWD = 2.0), which represents the age of the retrograde skarn alteration and the maximum age for the gold mineralization. Together with the previous molybdenite Re–Os age, we have further constrained the Beiya gold–polymetallic metallogeny to 33.1–34.1 Ma. The mineralization age is slightly younger than the porphyry emplacement, indicating that the Beiya metallogeny was likely to be a post-magmatic hydrothermal product of the Himalayan orogenic event. The REE characteristics of hydrothermal titanite also reveal that the ore forming fluids may have been derived from a highly oxidized magma.     

Fluid inclusions and H–O–S–Pb isotope systematics of the Chalukou giant porphyry Mo deposit,Heilongjiang Province,China

The Chalukou giant porphyry Mo deposit, located in the northern Great Xing'an Range, is the largest Mo deposit in the Xing'an–Mongolia orogenic belt. This deposit's ore bodies are mainly hosted in an intermediate–felsic complex and Jurassic volcanic sedimentary rocks, of which Late Jurassic granite porphyry, quartz porphyry and fine grained granite are closely associated with the Mo mineralization. Three types of fluid inclusions (FIs) are present in the quartz associated with oxide and sulphide minerals, i.e., liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs. The FIs in the quartz phenocrysts of the granite porphyry contain liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs. The homogenization temperatures vary from 230 °C to 440 °C and 470 °C to 510 °C, and their salinities vary from 0.7% to 53.7% NaCl eq. and 6.2% to 61.3% NaCl eq., respectively. The FIs of K-feldspar–quartz–magnetite veins of the early stage are composed of liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs with homogenization temperatures and salinities of 320 °C to 440 °C and 4.2% to 52.3% NaCl eq., respectively. The FIs of quartz–molybdenite veins and breccia of the middle stage are composed of liquid-rich two-phase, gas-rich two-phase and daughter mineral-bearing multiphase FIs with homogenization temperatures and salinities of 260 °C to 410 °C and 0.4% to 52.3% NaCl eq., respectively. FIs of quartz–fluorite–galena–sphalerite veins of the late stage are liquid-rich two-phase FIs with homogenization temperatures and salinities of 170 °C to 320 °C and 0.5% to 11.1% NaCl eq., respectively. The ore-forming fluids of the Chalukou deposit are characterised by high temperature, high salinity and high oxygen fugacity, belonging to an F-rich H₂O–NaCl ± CO₂ system. The δ¹⁸O_W values vary from − 4.5‰ to 3.2‰, and the δD_W values vary from − 138‰ to − 122‰, indicating that the ore-forming fluids were a mixture of magmatic and meteoric water. The δ³⁴S values range from − 1.9‰ to + 3.6‰ with an average of + 1.6‰. The ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb values of the metallic minerals are in the ranges of 18.269–18.501, 15.524–15.567 and 38.079–38.264, respectively. Both the S and Pb isotopic systems indicate that the ore metals and fluids came primarily from a deep-seated magma source from the juvenile lower crust. The Mo mineralization in the Chalukou deposit occurred at a depth of 0.5 to 1.3 km, and multiple stages of phase separation or immiscibility of ore-forming fluid was critical for the formation of the Chalukou deposit.     

Geochemistry and geochronology of porphyries from the Beiya gold–polymetallic orefield,western Yunnan,China

The Beiya gold–polymetallic orefield, with gold reserves of 305 t, is one of the most representative porphyry-skarn orefields in the Jinshajiang–Ailaoshan Cu–Au ore belt within the Sanjiang region of southwest China. The orefield contains seven deposits: the Wandongshan, Hongnitang, Dashadi, Bijiashan, Weiganpo, Matouwan, and Bailiancun deposits. In this paper we report on the geochemistry and geochronology of porphyries associated with mineralization from the seven deposits. The results show that all the porphyries have similar geochemistry, with high alkalinity, high contents of SiO₂, Al₂O₃, K₂O, and Sr, high K₂O/Na₂O ratios, low MgO, Y, and Yb contents, enrichments in Ba, K, and Pb, depletions in P, Ti, Nb, and Ta, and non-evident to weak Eu depletions (δEu = 0.42–0.99). In the SiO₂ vs. Th/Ce diagram, the porphyry samples are distributed in the area of thickened lower crust, and in the Sr/Y vs. Y and La/Yb vs. Yb diagrams, the porphyries broadly followed the batch-melting trend of amphibolite containing up to 10% garnet. LA-MC-ICP-MS zircon U–Pb dating analysis suggests that the porphyries were emplaced between 34.62 ± 0.25 and 36.72 ± 0.25 Ma. They were coeval with lamprophyres (34 to 36 Ma) in the Beiya area and with potassic–ultrapotassic intrusive rocks (40 to 35 Ma) within the Jinshajiang–Ailaoshan magmatic belt, indicating possible genetic relation between these rock types. We suggest that the porphyries in the Beiya gold–polymetallic orefield were derived from the partial melting of a K-rich mafic source in the thickened lower crust, with the melting triggered by asthenospheric upwelling following the removal of lower lithospheric mantle.     

Geology,geochemistry and sulphur isotopes of the Hat Han gold–antimony deposit,NE Vietnam

The Song Hien Rift basin is considered as one of the important regions for gold deposits in North East Vietnam. Host rocks of a number gold deposits in the Song Hien Rift basin are mainly in Lower Triassic sedimentary formations. However, there is the Hat Han gold deposit hosted in fined-grained mafic magmatic rocks with similar characteristics as gold deposit hosted in the Triassic sediments. Sulphur isotopic compositions of sulphide are similar to those in carbonaceous shale, suggesting that the sulphur was ‘borrowed’ from sedimentary rocks in filling the rift basin. Gold-bearing sulphides (pyrite and arsenopyrite) are the main form of Au presence in the ore. Gold in pyrite is present as Au^+ 1, and a minor amount of as nanoparticles of native Au (Au⁰); whereas in arsenopyrite, gold is chemically bound as the octahedral complex AuAs₂. Analysis of geology, as well as geochemical and isotopic studies show that the genesis of the Hat Han gold deposit is not related to the Cao Bang mafic magmatism; instead the latter only serves as (ore) host rock. The geochemical results presented above suggest that the gabbro host rock only supplies iron needed for sulphide formation. With regard to ore genesis, the Hat Han gold deposit in the Song Hien rift basin was generated in the similar way as sediment-hosted gold deposit. There are many similar typomorphic features between the Hat Han deposit and Carlin-like deposits in the Nanpanjang sedimentary basin in China.     

Geology of the Jiama porphyry copper–polymetallic system,Lhasa Region,China

The Jiama deposit, located in the eastern part of the well-known Gangdese Metallogenic Belt on the Tibetan Plateau, is the largest porphyry Cu–polymetallic system in the region, with the largest exploration budget, and is economically viable in the Gangdese Belt to undergo large-scale development. The deposit is well preserved and has experienced little erosion. The proven resources of the deposit are 7.4 Mt Cu, 0.6 Mt Mo, 1.8 Mt Pb + Zn, 6.65 Moz Au, and 360.32 Moz Ag. The results presented in this paper are based on geological and tectonic mapping, geological logging, and other exploration work performed by members of the Jiama Exploration Project Team over a period of 6 years. We propose that the Jiama porphyry Cu–polymetallic system is composed of skarn Cu–polymetallic, hornfels Cu–Mo, porphyry Mo ± Cu, and distal Au mineralization. The development of skarn Cu–polymetallic orebodies at the Jiama deposit was controlled mainly by the contact zone between porphyries and marbles, an interlayer detachment zone, and the front zone of a gliding nappe structure. The hornfels Cu–Mo and porphyry Mo ± Cu orebodies were controlled mainly by a fracture system related to intrusions, and the distal Au mineralization resulted from late-stage hydrothermal alteration.On the basis of field geological logging, optical microscopy, and chemical analysis, we verify that the alteration zones in the Jiama deposit include potassic, phyllic, propylitic, and argillic alteration, with a local lithocap, as well as endoskarn and exoskarn zones. The endoskarn occurs mainly as epidote alteration in quartz diorite porphyry and granite porphyry, and is cut by massive andradite veins. The exoskarn includes garnet–pyroxene and wollastonite skarn, in which the mineralogy and mineral chemical compositions display an outward zonation with respect to the source porphyry. From the proximal skarn to the intermediate skarn to the distal skarn, the garnet/pyroxene ratio varies from > 20:1 to ~ 10:1 to ~ 5:1, the garnet color varies from red-brown to brown-green to green-yellow, and the average composition of garnet varies from Ad_80.1Gr_18.9(Sp + Py)_1.0 to Ad_76.3Gr₂₃(Sp + Py)_0.7 to Ad_59.5Gr_39.5(Sp + Py)_1.0, respectively. The pyroxene is not as variable in composition as the garnet, and is primarily light green to white diopside with a maximum hedenbergite content of ~ 20% and an average composition of Di_88.6Hd_8.9Jo_2.5. From the proximal skarn to the intermediate skarn to the distal skarn, the mineralization changes from Cu–Mo to Cu ± Mo to Pb–Zn ± Cu ± Au ores, respectively. The wollastonite skarn displays no zonation and hosts mainly bornite mineralization. The Cu and Mo mineralization is closely related to the potassic and phyllic zones in the porphyry–hornfels.Zircons from four mineralized porphyries yield U–Pb ages of 15.96 ± 0.5 Ma, 15.72 ± 0.14 Ma, 15.59 ± 0.09 Ma, and 15.48 ± 0.08 Ma. The Re–Os ages of molybdenite from the skarn, hornfels, and porphyry are 15.37 ± 0.15 Ma, 14.67 ± 0.37 Ma, and 14.66 ± 0.27 Ma, respectively. The present results are consistent with the findings of previous research on fluid inclusions, isotopes, and other such aspects. On the basis of the combined evidence, we propose a porphyry Cu–polymetallic system model for the Jiama deposit and suggest a regional exploration strategy that can be applied to prospecting for porphyry-skarn mineralization in the Lhasa area.     

Geology,geochronology, and Hf isotope geochemistry of the Longtougang skarn and hydrothermal vein Cu–Zn deposit,North Wuyi area,southeastern China

The recently discovered Longtougang skarn and hydrothermal vein Cu–Zn deposit is located in the North Wuyi area, southeastern China. The intrusions in the ore district comprise several small porphyritic biotite monzonite, porphyritic monzonite, and porphyritic granite plutons and dikes. The mineralization is zoned from a lower zone of Cu-rich veins and Cu–Zn skarns to an upper zone of banded Zn–Pb mineralization in massive epidote altered rocks. The deposit is associated with skarn, potassic, epidote, greisen, siliceous, and carbonate alteration. Molybdenite from the Cu-rich veins yielded a Re–Os isochron age of 153.6 ± 3.9 Ma, which is consistent with U–Pb zircon ages of 154.0 ± 1.3 Ma for porphyritic monzonite, 154.0 ± 0.8 Ma for porphyritic biotite monzonite, and 152.0 ± 0.8 Ma for porphyritic granite. Geological observations suggest that the Cu mineralization is genetically related to the porphyritic biotite monzonite and porphyritic monzonite. All the zircons from intrusive rocks in the ore district are characterized by ε_Hf(t) values between − 13.41 and − 4.38 and Hf model ages (T_DM2) between 2054 and 1482 Ma, reflecting magmas derived mainly from a Proterozoic crustal source. Molybdenite grains from the deposit have Re values of 14.6–27.7 ppm, indicative of a mixed mantle–crust source. The porphyry–skarn abundant Cu and hydrothermal vein type Pb–Zn–Ag deposits in the North Wuyi area are related to the Late Jurassic porphyritic granites and Early Cretaceous volcanism, respectively. The Late Jurassic mineralization-related granites were derived from the crustal anatexis with some mantle input, which was triggered by asthenospheric upwelling induced by slab tearing during oblique subduction of the paleo-Pacific plate beneath the South China block, and the Early Cretaceous mineralization-related granitoids mainly from crust material formed within a series of NNE-trending basins during margin-parallel movement of the plate.     

Geology and ore genesis of the late Paleozoic Heijianshan Fe oxide–Cu (–Au) deposit in the Eastern Tianshan,NW China

The Heijianshan Fe–Cu (–Au) deposit, located in the Aqishan-Yamansu belt of the Eastern Tianshan (NW China), is hosted in the mafic–intermediate volcanic and mafic–felsic volcaniclastic rocks of the Upper Carboniferous Matoutan Formation. Based on the pervasive alteration, mineral assemblages and crosscutting relationships of veins, six magmatic–hydrothermal stages have been established, including epidote alteration (Stage I), magnetite mineralization (Stage II), pyrite alteration (Stage III), Cu (–Au) mineralization (Stage IV), late veins (Stage V) and supergene alteration (Stage VI). The Stage I epidote–calcite–tourmaline–sericite alteration assemblage indicates a pre-mineralization Ca–Mg alteration event. Stage II Fe and Stage IV Cu (–Au) mineralization stages at Heijianshan can be clearly distinguished from alteration, mineral assemblages, and nature and sources of ore-forming fluids.Homogenization temperatures of primary fluid inclusions in quartz and calcite from Stage I (189–370 °C), II (301–536 °C), III (119–262 °C) and V (46–198 °C) suggest that fluid incursion and mixing probably occurred during Stage I to II and Stage V, respectively. The Stage II magmatic–hydrothermal-derived Fe mineralization fluids were characterized by high temperature (>300 °C), medium–high salinity (21.2–56.0 wt% NaCl equiv.) and being Na–Ca–Mg–Fe-dominated. These fluids were overprinted by the external low temperature (<300 °C), medium–high salinity (19.0–34.7 wt% NaCl equiv.) and Ca–Mg-dominated basinal brines that were responsible for the subsequent pyrite alteration and Cu (–Au) mineralization, as supported by quartz CL images and H–O isotopes. Furthermore, in-situ sulfur isotopes also indicate that the sulfur sources vary in different stages, viz., Stage II (magmatic–hydrothermal), III (basinal brine-related) and IV (magmatic–hydrothermal). Stage II disseminated pyrite has δ³⁴S_fluid values of 1.7–4.3‰, comparable with sulfur from magmatic reservoirs. δ³⁴S_fluid values (24.3–29.3‰) of Stage III Type A pyrite (coexists with hematite) probably indicate external basinal brine involvement, consistent with the analytical results of fluid inclusions. With the basinal brines further interacting with volcanic/volcaniclastic rocks of the Carboniferous Matoutan Formation, Stage III Type B pyrite–chalcopyrite–pyrrhotite assemblage (with low δ³⁴S_fluid values of 4.6–10.0‰) may have formed at low fO₂ and temperature (119–262 °C). The continuous basinal brine–volcanic/volcaniclastic rock interactions during the basin inversion (∼325–300 Ma) may have leached sulfur and copper from the rocks, yielding magmatic-like δ³⁴S_fluid values (1.5–4.1‰). Such fluids may have altered pyrite and precipitated chalcopyrite with minor Au in Stage IV. Eventually, the Stage V low temperature (∼160 °C) and low salinity meteoric water may have percolated into the ore-forming fluid system and formed late-hydrothermal veins.The similar alteration and mineralization paragenetic sequences, ore-forming fluid sources and evolution, and tectonic settings of the Heijianshan deposit to the Mesozoic Central Andean IOCG deposits indicate that the former is probably the first identified Paleozoic IOCG-like deposit in the Central Asian Orogenic Belt.     

Geology, mineralization, stable isotope geochemistry, and fluid inclusion characteristics of the Novogodnee–Monto oxidized Au–(Cu) skarn and porphyry deposit, Polar Ural, Russia

The Novogodnee–Monto oxidized Au–(Cu) skarn and porphyry deposit is situated in the large metallogenic belt of magnetite skarn and Cu–Au porphyry deposits formed along the Devonian–Carboniferous Urals orogen. The deposit area incorporates nearly contemporaneous Middle–Late Devonian to Late Devonian–Early Carboniferous calc-alkaline (gabbro to diorite) and potassic (monzogabbro, monzodiorite- to monzonite-porphyry, also lamprophyres) intrusive suites. The deposit is represented by magnetite skarn overprinted by amphibole–chlorite–epidote–quartz–albite and then sericite–quartz–carbonate assemblages bearing Au-sulfide mineralization. This mineralization includes early high-fineness (900–990?‰) native Au associated mostly with cobaltite as well as with chalcopyrite and Co-pyrite, intermediate-stage native Au (fineness 830–860?‰) associated mostly with galena, and late native Au (760–830?‰) associated with Te minerals. Fluid inclusion and stable isotope data indicate an involvement of magmatic–hydrothermal high-salinity (>20 wt.% NaCl-equiv.) chloride fluids. The potassic igneous suite may have directly sourced fluids, metals, and/or sulfur. The abundance of Au mineralization is consistent with the oxidized character of the system, and its association with Co-sulfides suggests elevated sulfur fugacity.