Site selection for drinking-water pumping boreholes using a fuzzy spatial decision support system in the Korinthia prefecture,SE Greece

The implementation of a geographic information system (GIS)/fuzzy spatial decision support system in the selection of sites for drinking-water pumping boreholes is described. Groundwater is the main source of domestic supply and irrigation in Korinthia prefecture, south-eastern Greece. Water demand has increased considerably over the last 30 years and is mainly met by groundwater abstracted via numerous wells and boreholes. The definition of the most “suitable” site for the drilling of new boreholes is a major issue in this area. A method of allocating suitable locations has been developed based on multicriteria analysis and fuzzy logic. Twelve parameters were finally involved in the model, prearranged into three categories: borehole yield, groundwater quality, and economic and technical constraints. GIS was used to create a classification map of the research area, based on the suitability of each point for the placement of new borehole fields. The coastal part of the study area is completely unsuitable, whereas high values of suitability are recorded in the south-western part. The study demonstrated that the method of multicriteria analysis in combination with fuzzy logic is a useful tool for selecting the best sites for new borehole drilling on a regional scale. The results could be used by local authorities and decision-makers for integrated groundwater resources management.     

瓦斯抽采钻孔间距优化三维数值模拟量化研究

为了识别钻孔间距对煤层瓦斯抽采的影响及如何实现高效抽采,基于流固耦合模型,建立三维几何模型,使其更接近现场实际,借助COMSOL软件模拟某煤矿钻孔不同间距的瓦斯抽采过程,利用瓦斯压力为0.74 MPa等压面三维立体图使有效抽采区域可视化,通过计算有效抽采区域体积大小,量化分析钻孔间距对抽采效果的影响。结果表明:单一钻孔抽采120 d时,有效抽采半径约为1.5 m;当布置多个钻孔且钻孔间距d为5 m,抽采120 d时,瓦斯压力为0.74 MPa的等压面围绕所有钻孔近似呈圆柱状但向内部凹陷（即出现空白带）;钻孔间距d为2.1、3、4、5、6 m时,有效抽采区域体积V的大小顺序随着时间的增长而改变,抽采120 d时,V_{d=5 m}>V_{d=4 m}>V_{d=3 m}>V_{d=2.1 m}>V_{d=6 m}。综合分析瓦斯压力等压面三维立体图和有效抽采区域体积的大小顺序,确定该矿钻孔的较优间距为4 m。研究提出的以有效抽采半径、叠加效应、三维瓦斯压力等压面的形状及有效抽采区域体积大小为指标的钻孔间距数值计算考察方法,可为煤矿井下钻孔间距优化布置提供参考。      

基于数字地球平台的地质钻孔三维模拟与可视化

研究了地质钻孔信息的管理和可视化技术,提出了一种在数字地球平台中进行城市钻孔信息模拟和可视化的方法。该方法基于一个统一的钻孔数据库标准,首先将钻探点位信息和地层分层信息组织成具有不同细节层次的钻探点位模型、钻孔分层散点模型和钻孔管段模型,然后构建基于细节层次模型的海量钻孔信息多尺度表达机制,最后将这些模型加载到数字地球平台中进行可视化及查询、分析。在上海市的应用实例显示,该方法实现过程简单、自动性高,生成的模型易于在国际互联网上进行分发、集成与共享。该方法的应用将有助于地质工作者向其他科技人员以及社会公众展示、分发自己拥有的钻孔信息,为以钻孔数据为代表的城市地质信息的社会化服务奠定基础。     

融合地震属性和成像测井信息优化的储层缝洞带评价与钻井轨迹

针对新疆某工区强非均质性岩溶缝洞型碳酸盐岩储层,提出了一种基于地震多属性优化与电成像测井信息融合的碳酸盐岩储层缝洞带识别评价与钻井轨迹优化设计方法。首先,利用相干体、蚂蚁体等多种地震属性与张量约束的稀疏脉冲反演结果综合实现缝洞发育带空间分布预测与雕刻,确定可能油气圈闭的分布范围;然后,基于数学形态学滤波方法,由电成像测井资料自动拾取井壁的裂缝和溶蚀孔洞分布,统计井壁裂缝倾向和倾角;再次,用工区内钻孔多臂井径资料计算的井筒崩落信息与电成像资料拾取的诱导缝信息预测工区的最大和最小主应力方向;最后,融合地震属性与电成像测井信息评价的缝洞分布结果,预测工区内走滑断裂带的最大主应力方向以NE—SW为主,局部为NW—SE,且以中高角度为主的裂缝走向与主应力近乎平行。采用预测主应力分布方法实现了沿NW—SE方向的大斜度井与水平井优化设计,钻遇了大规模优质储集体,获得了稳定油流,并以此为基础在周围打井若干口,极大地降低了深层勘探的钻井风险。     

The use of the natural gamma log in engineering geological investigations

The natural gamma log is widely used in both cased and uncased boreholes to identify changes in lithology down the length of a borehole. This is particularly important in the ground investigation process where 100% core recovery is often not achieved in the borehole programme. In this paper the use of the gamma log to provide additional information from the ground investigation boreholes is examined and illustrated by a number of case histories. It is shown that the gamma log can be used to study both the lithological variations within an individual borehole and changes in geological structure across a construction site. It is also demonstrated that a geological formation or sequence can be classified in terms of its natural gamma signature, which enables the geologist to observe its presence over large distances on a regional basis. The importance of the calibration of the gamma sonde and the use of the correct logging speed is emphasised in the paper. The successful calibration of the log against a quarry wall using a known observed geological structure as a reference is also described together with the use of the resulting information to obtain a geological log for boreholes drilled behind the quarry face. Its use in extrapolating between boreholes to detect and trace the presence of a particular geological formation to estimate its vertical and lateral extent for possible extraction is also discussed.     

封闭不良钻孔矿井瞬变电磁法超前精细探测研究

封闭不良钻孔不同程度地连通含水层,形成隐蔽性较强的导水通道,对巷道掘进和工作面回采构成水害威胁。基于全空间瞬变电磁理论,构建掘进工作面前方封闭不良钻孔三维地质-地球物理模型,模拟研究封闭不良钻孔影响区模型的全空间瞬变电磁场响应特征,进而探讨矿井瞬变电磁法用于封闭不良钻孔超前探测的有效性。数值模拟结果表明,封闭不良钻孔附近含水体在感应电动势多测道图上表现为幅值增强,异常特征明显。结合宁夏双马煤矿I0104₁08工作面运输巷掘进工作面前方封闭不良钻孔超前探测工程开展应用研究,探测结果显示,在钻孔位置的煤层顶板出现局部低阻,表明该钻孔具有一定的导水性,引起顶板局部相对富水性增强。研究结果表明,封闭不良钻孔导致的局部富水性增强可以引起典型且易于识别的瞬变电磁场响应。采用矿井瞬变电磁法进行超前探测,并结合精细化处理解释可以有效查明钻孔附近岩层的相对富水特征,进而对封闭不良钻孔的导水性进行评价,为封闭不良钻孔的治理提供依据,保障矿井安全生产。     

基于钻孔摄像技术的岩体完整性评价方法

通过钻孔摄像技术获取岩体的结构特性,提出一种评价岩体完整性的新方法--RMDI法,并应用于开滦煤矿唐山矿区数字钻孔摄像工程地质勘测中的离层孔。结果表明：（1）高精度的钻孔图像能为岩体完整性评价提供可靠的结果;（2）DIDF能反映钻孔壁岩体完整程度的轴向分布状况;（3）RMDI法用于评价岩体完整性是可行的;（4）RMDI法能实现全孔段或局部孔段的岩体完整性评价,完成对岩体不同完整段的位置搜索。     

Improving the groundwater-well siting approach in consolidated rock in Nampula Province,Mozambique

Vertical electrical sounding was used for assessing the suitability of the drill sites in crystalline areas within a water supply project in Nampula Province in Mozambique. Many boreholes have insufficient yield (<600 L/h). Electrical resistivity tomography (ERT) was carried out over seven boreholes with sufficient yield, and five boreholes with insufficient yield, in Rapale District, in an attempt to understand the reason for the failed boreholes. Two significant hydrogeological units were identified: the altered zone (19–220 ohm-m) with disintegrated rock fragments characterized by intermediate porosity and permeability, and the fractured zone (>420 ohm-m) with low porosity and high permeability. In addition to this, there is unfractured nonpermeable intact rock with resistivity of thousands of ohm-m. The unsuccessful boreholes were drilled over a highly resistive zone corresponding to fresh crystalline rock and a narrow altered layer with lower resistivity. Successful boreholes were drilled in places where the upper layers with lower resistivity correspond to a well-developed altered layer or a well-fractured basement. There are a few exceptions with boreholes drilled in seemingly favourable locations but they were nevertheless unsuccessful boreholes for unknown reasons. Furthermore, there were boreholes drilled into very resistive zones that produced successful water wells, which may be due to narrow permeable fracture zones that are not resolved by ERT. Community involvement is proposed, in choosing between alternative borehole locations based on information acquired with a scientifically based approach, including conceptual geological models and ERT. This approach could probably lower the borehole failure rate.     

基于钻孔雷达的透明工作面构建方法

煤岩界面的高精度探测是构建智能开采三维地质模型的关键难点。提出利用煤矿井下顺层孔实施单孔反射雷达,联合多孔探测结果构建区域煤岩界面地质模型实现透明工作面的方法。对单孔雷达数据,利用巷道波同相轴斜率计算煤层雷达波速度,采用空间约束偏移成像实现煤层顶/底板反射界面精准归位。形成3种匹配实际开采的透明工作面构建模式:回采前长钻孔模式、回采中短钻孔模式和联合模式。在山西某矿31004工作面对回采中短钻孔模式进行试验性应用,基于钻孔雷达构建的工作面地质模型与原始地质模型相比,局部信息刻画更精细,顶、底界面及煤厚与实际数据误差分别小于0.57、0.54、0.30 m。结果表明:钻孔雷达能高精度探测煤厚与顶、底界面,可实现透明工作面的构建。      

新疆准噶尔盆地东缘五彩湾地区煤田钻孔数据集

新疆准噶尔盆地是中国油气、煤炭等能源矿产的重要储集场所。本次研究对搜集到的准噶尔盆地东缘五彩湾地区20个煤田钻孔资料进行二次开发利用,通过提取钻孔坐标、高程、地层分层厚度、颜色、测井曲线解译数据等重要信息,重新建立了钻孔数据集。数据集共包含20个钻孔资料的Excel数据库型数据,每个Excel数据库由“钻孔基本信息”、“测井解释岩性分层”、“地质编录柱状分层”、“综合柱状信息”、“钻孔岩性分层”、“地层名称及代号表”、“地层颜色”、“测井曲线配置”、“测井曲线数据”、“数据字典”等10个工作表组成。利用石文软件可读取数据集信息,绘制地层沉积三维立体图,该成果能够对准噶尔盆地东缘五彩湾地区砂体的空间展布、三维地质结构等提供更加直观的认识,对研究准噶尔盆地东缘五彩湾地区的沉积环境具有重要意义。     

Optimal experimental design for reservoir property estimates in geothermal exploration

During geothermal reservoir development, drilling deep boreholes turns out to be extremely expensive and risky. Thus, it is of great importance to work out the details of suitable borehole locations in advance. Here, given a set of existing boreholes, we demonstrate how a sophisticated numerical technique called optimal experimental design helps to find a location of an additional exploratory borehole that reduces risk and, ultimately, saves cost. More precisely, the approach minimizes the uncertainty when deducing the effective permeability of a buried reservoir layer from a temperature profile measured in this exploratory borehole. In this paper, we (1) outline the mathematical formulation in terms of an optimization problem, (2) describe the numerical implementation involving various software components, and (3) apply the method to a 3D numerical simulation model representing a real geothermal reservoir in northern Italy. Our results show that optimal experimental design is conceptually and computationally feasible for industrial-scale applications. For the particular reservoir and the estimation of permeability from temperature, the optimal location of the additional borehole coincides with regions of high flow rates and large deviations from the mean temperature of the reservoir layer in question. Finally, the presentation shows that, methodologically, the optimization method can be generalized from estimating permeability to finding any other reservoir properties.     

地—井TEM典型特征分析与异常解释——以新疆白石泉铜镍矿zk506孔为例

地-井TEM法（瞬变电磁法）是一种寻找深部隐伏良导体的有效方法。以新疆白石泉铜镍矿区zk506孔三分量井中瞬变电磁测量为例,结合钻孔已知信息,通过分析曲线特征,从上至下共划定了3个异常,并推测第2个异常为主要异常,确定其方位为东南,同时根据z分量响应在晚期还有较强的幅值,判断异常在东南方向上具有相对长的延展,最后通过与zk506孔以及后期施工的zk507、zk508孔的地质编录对比,验证了地-井TEM解译推断,修正了之前zk506孔单孔编录的地质认识,证明了井中瞬变电磁法在良导硫化物矿勘探中的有效性和重要性。      

水上钻探作业平台的制作及应用

针对岳城水库库区水下煤炭资源勘探难题，介绍了水上勘探作业平台的制作运输、安装程序和方法，指出了钻探施工应注意的问题。该区共施工了5个地质钻孔和1个水文孔，特、甲级率达到100％，完成了库区水上勘探任务，为解决库区内勘探难题提供了例证。     

底板梳状长钻孔替代穿层钻孔瓦斯抽采技术可行性

底板岩巷穿层钻孔抽采技术和本煤层定向长钻孔抽采技术是目前高瓦斯和突出矿井回采工作面最为主要的瓦斯治理措施。晋城矿区赵庄矿煤层具松软低透气性特点,主要采用岩巷穿层钻孔消突为主,本煤层顺层钻孔消突为辅的瓦斯治理方法。但底板岩巷穿层钻孔存在工程量大、施工周期长及成本高等缺点,本煤层钻孔存在钻孔抽采不均匀、钻孔覆盖密度不足等技术缺陷。为对比考察底板梳状长钻孔与底板岩巷穿层钻孔的抽采效果,在赵庄矿1307采面开展了2种瓦斯治理方法。结果表明:抽采条件和抽采范围相同条件下,5个底板梳状长钻孔的瓦斯抽采总量占到底板岩巷穿层钻孔瓦斯抽采总量的75.4%,而底板梳状长钻孔的经济投入仅占底板岩巷穿层钻孔经济投入的29.2%。由此得出,研究区梳状长钻孔替代穿层钻孔的瓦斯抽采技术是可行的。该研究为底板梳状长钻孔替代底板岩巷的技术可行性提供了实践参考,为松软低透的高瓦斯和突出矿井的瓦斯治理提供了更为经济可行的治理方案。      

Electromagnetic sounding of the Earth’s crust in the vicinities of the SG-6 and SG-7 superdeep boreholes in the fields of natural and powerful controlled sources

The results of electromagnetic sounding of the Earth??s crust in the vicinities of the SG-6 and SG-7 superdeep boreholes (Yamal-Nenets Autonomous Okrug) are presented. The studies were conducted in the fields of natural sources (AMT-MTS) and in the field of the Zevs ULF antenna located at a distance of more than 2000 km from the receiver points. In the vicinity of the SG-7 superdeep borehole, where the small industrial noise was observed, the results of inverse problem solution are completely consistent with the electric logging data. The conducting layers have been identified at the depths of 150 m and 1.1 km. The roof of rocks having small electrical conductivity and belonging to the Permian-Triassic trappean complex has been found at the depth of about 7 km. The response of the Zevs signal (the frequency range of 44?C182 Hz) has indicated the properties of the upper part of the geoelectrical section better than audiomagnetotelluric sounding for both boreholes. Based on the sounding in the vicinity of the SG-6 superdeep borehole, with the data of the Novosobirsk observatory taken into account, the distribution of resistivity down to about 800 km depth has been obtained. This distribution can serve as additional information in calculation of the temperature and rheological regime of the lithosphere and the upper mantle in the region of Western Siberia.     

咸阳地热田钻孔温度测量及水动力系统

地热田温度场分析, 不仅为地热田类型划分和热源机理研究提供科学根据, 而且可以为确定地热田有利开采区域和深度提供直接依据。本文报道了咸阳地热田13口钻孔的系统(准)稳态测温数据, 对研究区温度的垂向分布特征做了初步分析, 并据此划分了地热田水动力系统。结果表明, 咸阳地热田属于以传导为主的沉积盆地型地热田, 地温梯度为26.2~40.1 ℃/km, 平均为32.4 ℃/km。然而, 与典型的传导型地热田相比, 咸阳地热田的地温场特征又存在特殊性, 表现为钻孔温度-深度曲线分段性明显: 浅部受地表水流动对温度场的影响, 地温曲线呈现出锯齿形波动; 钻孔中上部受地表水和深部水热活动影响较小, 温度曲线为传导性地热特征; 井孔中下部测温曲线明显"下凹", 揭示了地下水沿渭河断裂侧向补给的同时使地层温度降低; 井孔下部温度随深度异常增大, 表明存在异常压力流体封存箱。测温资料揭示了咸阳地热田水动力系统在垂向上存在多层结构: 浅部为垂向重力驱动型, 中上部为正常压实型, 中下部为侧向重力驱动型, 下部为封闭型。基于咸阳地热田水动力系统的多层结构, 建议将各系统赋存的地热资源分别进行规划和开发。     

利用孔斜成像技术解译结晶岩体裂隙发育几何特征

钻孔电视成像技术由于其高精度数字记录成像的特点,克服了工程钻探过程中岩芯不连续、裂隙几何要素信息丢失等问题,在国内外工程勘察中得到了广泛的应用。但目前钻孔成像解译大都以竖直孔为主,倾斜孔成像解译应用较少。结合某地区地下水封洞库项目中的斜孔电视成像工作,介绍了斜孔成像裂隙的解译方法,通过空间坐标转换将结构面的视产状转换成真产状,并在此基础上针对该地区地下水幕系统和洞室所在位置深度范围内的裂隙发育情况分三部分对深部花岗岩结晶岩体裂隙几何要素进行了统计分析,揭示了相应的裂隙发育产状变化特征和垂向变化特征,结果表明该地区主要发育NE 20°~40°和NW 20°~40°优势构造成因裂隙,裂隙发育数量呈现先减小后逐渐增大并维持较稳定数量的变化趋势。以此可为评价洞库围岩稳定性、水幕系统水封效果等提供了可靠的数据支持。     

压磁套芯三维原地应力测量研究

压磁套芯解除法是20世纪50年代开始发展起来的原地应力测试技术。为了实现在单一钻孔中进行三维地应力测量研制了单孔全应力计。在简单介绍压磁全应力计结构和计算原理的基础上,通过现场测试,对在锦屏二级水电站地下厂房洞群区压磁套心解除3孔交汇法三维地应力测量和单孔三维地应力测量及水压致裂地应力测量进行了比较分析研究。测量结果表明,在探洞浅部,受局部地形影响,测点的应力分布主要受自重和地形地貌控制,形成特有的“V”型河谷岸坡内的局部应力状态,最大主应力为11 MPa左右,作用方向NNW基本近水平;在探洞深部地应力应力值较高,最大主应力为40 MPa左右,作用方向近直立;随水平埋深的增大最大主应力由近水平状态转变为近直立状态,说明在洞深部自重应力起主导作用。通过三种方法测量结果的对比分析,说明压磁套心解除单孔三维地应力测试技术与压磁套心解除3孔交汇法和水压致裂地应力测试技术具有相同测试精度。     

基于超声波合成孔径技术的钻孔成像方法

随着地下空间开发的深入,钻孔岩壁上特殊区域的重视程度越来越高,为了克服传统超声波钻孔成像技术分辨率低的不足,提出一种基于超声波合成孔径技术的钻孔成像方法,提高钻孔图像的分辨率和图像质量。采用高分辨率的合成孔径SAFT成像技术综合处理大量的断面扫描回波信号,达到增强反射信号和抑制干扰信号的目的,使对应的岩壁特征区域回波更加突显,在该基础上提取出扫描断面回波信号的声幅和声时参数。综合声幅和声速参数的特征,提出了基于相关性的超声波钻孔图像重建原则,选择合适的成像数据点,在叠加不同深度的探测数据后形成了关注区域更加明显的钻孔重建图像。将该方法应用到了实际工程中,验证了该方法的可行性和准确性。     

Upscaling equivalent hydrofacies simulation based on borehole data generalization and transition probability geostatistics

The heterogeneity of hydrofacies is represented as spatial variability on different scales, and it has a significant impact on the behavior of groundwater flow and pollutant transport. However, effectively characterizing hydrofacies heterogeneity on different scales remains one of the most challenging problems in hydrogeology. In this study, an upscaling hydrofacies simulation (UHS) framework is proposed by integrating the upscaling borehole generalization (UBG) approach and transition probability geostatistics (TPG). A new UBG approach for generating virtual boreholes with equivalent hydrofacies information based on relatively high-density borehole lithological data is proposed, and the TPG is used to delineate the multiscale facies distribution. The results show that the UBG approach can significantly reduce borehole data volume while retaining the key equivalent hydrofacies information on a coarser scale. The UHS method can well characterize the overall distribution of equivalent hydrofacies on coarser scales, with the minor-component hydrofacies underestimated and the major-component hydrofacies overestimated to a lesser extent, and more equivalent facies appearing in strong heterogeneous areas. These results demonstrate that the UHS method can provide valuable capacity insights and advantages in characterizing hydrofacies heterogeneity on different scales using such high-density borehole lithological data.