共查询到20条相似文献,搜索用时 46 毫秒
1.
The Bayan Obo Fe-REE-Nb deposit in northern China is the world's largest light REE deposit, and also contains considerable amounts of iron and niobium metals. Although there are numerous studies on the REE mineralization, the origin of the Fe mineralization is not well known. Laser ablation (LA) ICP-MS is used to obtain trace elements of Fe oxides in order to better understand the process involved in the formation of magnetite and hematite associated with the formation of the giant REE deposit. There are banded, disseminated and massive Fe ores with variable amounts of magnetite and hematite at Bayan Obo. Magnetite and hematite from the same ores show similar REE patterns and have similar Mg, Ti, V, Mn, Co, Ni, Zn, Ga, Sn, and Ba contents, indicating a similar origin. Magnetite grains from the banded ores have Al + Mn and Ti + V contents similar to those of banded iron formations (BIF), whereas those from the disseminated and massive ores have Al + Mn and Ti + V contents similar to those of skarn deposits and other types of magmatic-hydrothermal deposits. Magnetite grains from the banded ores with a major gangue mineral of barite have the highest REE contents and show slight moderate REE enrichment, whereas those from other types of ores show light REE enrichment, indicating two stages of REE mineralization associated with Fe mineralization. The Bayan Obo deposit had multiple sources for Fe and REEs. It is likely that sedimentary carbonates provided original REEs and were metasomatized by REE-rich hydrothermal fluids to form the giant REE deposit. 相似文献
2.
The Tianhu Fe deposit (> 104 Mt at 42% TFe) in the Eastern Tianshan (NW China) is hosted in the schist, quartzite, marble, and amphibolite of the Neoproterozoic Tianhu Group. The deposit consists of disseminated, banded and massive ores. Metallic minerals are dominantly magnetite and pyrite, with minor titanite, pyrrhotite, chalcopyrite, and sphalerite. Gangue minerals include dolomite with minor forsterite, diopside, apatite, biotite, chlorite, tourmaline, tremolite, talc, calcite, and magnesite. Pyrite separates from ores have 10.7 to 54.7 ppb Re and 0.033 to 0.175 ppb common Os. Those from the massive ores have a model 1 isochron age of 535 ± 36 Ma (2σ), in agreement with the isochron age (528 ± 18 Ma) of pyrite from the banded ores by regression of seven Re–Os analyses. The Re–Os age of ~ 530 Ma reflects the timing of a hydrothermal event that remobilized the Tianhu deposit. Magnetite has Mg, Al, Ti, V, Mn, Zn, and Ga contents ranging from ~ 5 to 3500 ppm and Cr, Co, Ni, and Sn contents ranging from ~ 1 to 200 ppm. Most magnetite grains have Ca + Al + Mn and Ti + V contents similar to those of the banded iron formation (BIF). Some grains have elevated Ti and V contents, indicating that that magnetite was formed by sedimentary process and overprinted by hydrothermal activity. Pyrite has δ 34S CDT values from − 9.23 to 10.96‰, indicating that the sulfur was reduced from the marine sulfates either by bacterial or thermochemical processes. Pyrite has relatively high Co (~ 346 to 3274 ppm) but low Ni (~ 5.6 to 35.4 ppm) with Co/Ni ratios ranging from ~ 10 to 270, indicating remobilization from a volcanic–hydrothermal fluid. Therefore, the Tianhu Fe deposit was originally a sedimentary type deposit but was overprinted by a hydrothermal event related to volcanic activity. 相似文献
3.
Magnetite is common in many ore deposits and their host rocks, and is useful for petrogenetic studies. In the Khetri copper belt in Rajasthan Province, NW India, there are several Cu-(Au, Fe) deposits associated with extensive Cu ± Fe ± Au ± Ag ± Co ± REE ± U mineralization hosted in phyllites, schists and quartzites of the Paleoproterozoic Delhi Supergroup. Ore bodies of these deposits comprise dominantly disseminated and vein-type Cu-sulfide ores composed of chalcopyrite, pyrite, and pyrrhotite intergrown with minor magnetite. There are also Fe-oxide ores with minor or no Cu-sulfides, which are locally overprinted by the mineral assemblage of the Cu-sulfide ores. In addition to the Fe-oxide and Cu-sulfide ores, the protolith of the Delhi Supergroup includes banded iron formations (BIFs) with original magnetite preserved (i.e. magnetite-quartzites) and their sheared counterparts. In the sheared magnetite-quartzites, their magnetite and quartz are mobilized and redistributed to magnetite and quartz bands. Trace elemental compositions of magnetite from these types of ores/rocks were obtained by LA-ICP-MS. The dataset indicates that different types of magnetite have distinct concentrations of Ti, Al, Mg, Mn, V, Cr, Co, Ni, Zn, Cu, P, Ge and Ga, which are correlated to their forming environments. Magnetite grains in magnetite-quartzites have relatively high Al (800–8000 ppm), Ti (150–900 ppm) and V (300–600 ppm) contents compared to those of BIFs in other regions such as the Yilgarn Craton, Western Australia and Labrador, Canada. The high Al, Ti and V contents can be explained by precipitation of the magnetite from relatively reduced, Al–Ti-rich water possibly involving hotter, seafloor hydrothermal fluids derived from submarine mafic volcanic rocks. Magnetite in sheared magnetite-quartzites is generally irregular and re-crystallized, and has Ni, Mn, Al, Cu and P contents lower than the magnetite from the unsheared counterparts, suggesting that the shearing-related mobilization is able to extract these elements from original magnetite. However, elevated contents of Ti, V, Co, Cr, Ge and Mg of the magnetite in the sheared magnetite-quartzites can be ascribed to involvement of external hydrothermal fluids during the shearing, consistent with occurrence of some hydrothermal minerals in the samples.Compositions of magnetite from the Fe-oxide and Cu-sulfide ores are interpreted to be controlled mainly by fluid compositions and/or oxygen fugacity ( fO 2). Other potential controlling factors such as temperature, fluid–rock interaction and co-precipitating minerals have very limited impacts. Magnetite in the Cu-sulfide ores has higher V but lower Ni contents than that of the Fe-oxide ores, likely indicating its precipitation from relatively reduced, evolved fluids. However, it is also indicated that the two types of magnetite do not show large distinctions in terms of concentrations of most elements, suggesting that they may have precipitated from a common, evolving fluid. We propose a combination of Ge versus Ti/Al and Cr versus Co/Ni co-variation plots to discriminate different types of magnetite from the Khetri copper belt. Our work agrees well with previous studies that compositions of magnetite can be potentially useful for provenance studies, but also highlights that discrimination schemes would be more meaningful for deposits in a certain region if fluid/water chemistry and specific formation conditions reflected in compositions of magnetite are clearly understood. 相似文献
4.
Conventional diamond exploration seldom searches directly for diamonds in rock and soil samples. Instead, it focuses on the search for indicator minerals like chrome spinel, which can be used to evaluate diamond potential. Chrome spinels are preserved as pristine minerals in the early Paleozoic (∼465 Ma), hydrothermally altered, Group I No. 30 pipe kimberlite that intruded the Neoproterozoic Qingbaikou strata in Wafangdian, North China Craton (NCC). The characteristics of the chrome spinels were investigated by petrographic observation (BSE imaging), quantitative chemical analysis (EPMA), and Raman spectral analysis. The results show that the chrome spinels are mostly sub-rounded with extremely few grains being subhedral, and these spinels are macrocrystic, more than 500 µm in size. The chrome spinels also have compositional zones: the cores are classified as magnesiochromite as they have distinctly chromium-rich (Cr 2O 3 up to 66.56 wt%) and titanium-poor (TiO 2 < 1 wt%) compositions; and the rims are classified as magnetite as they have chromium-poor and iron-rich composition. In the cores of chrome spinels, compositional variations are controlled by Al 3+-Cr 3+ isomorphism, which results in a strong Raman spectra peak (A 1g mode) varying from 690 cm −1 to 702.9 cm −1. In the rims of chrome spinel, compositional variations result in the A 1g peak varying from 660 cm −1 to 672 cm −1. The morphology and chemical compositions indicate that the chrome spinels are mantle xenocrysts. The cores of the spinel are remnants of primary mantle xenocrysts that have been resorbed, and the rims were formed during kimberlite magmatism. The compositions of the cores are used to evaluate the diamond potential of this kimberlite through comparison with the compositions of chrome spinels from the Changmazhuang and No. 50 pipe kimberlites in the NCC. In MgO, Al 2O 3 and TiO 2 versus Cr 2O 3 plots, the chrome spinels from the Changmazhuang and No. 50 pipe kimberlites are mostly located in the diamond stability field. However, only a small proportion of chrome spinels from No. 30 pipe kimberlite have same behavior, which indicates that the diamond potential of the former two kimberlites is greater than that of the No. 30 pipe kimberlite. This is also supported by compositional zones in the spinel grains: there is with an increase in Fe 3+ in the rims, which suggests that the chrome spinels experienced highly oxidizing conditions. Oxidizing conditions may have been imparted by fluids/melts that have a great influence on diamond destruction. Here, we suggest that chrome spinel compositions can be a useful tool for identifying the target for diamond potential in the North China Craton. 相似文献
5.
Manganoan ilmenite was identified in Juina, Brazil kimberlitic rocks among other megacrysts. It forms oval, elongated, rimless grains comprising 8–30 wt.% of the heavy fraction. Internally the grains are homogeneous. The chemical composition of Mn-ilmenite is almost stoichiometric for ilmenite except for an unusually high manganese content, with MnO = 0.63–2.49 wt.% (up to 11 wt.% in inclusions in diamond) and an elevated vanadium admixture (V 2O 3 = 0.21–0.43 wt.%). By the composition, Mn-ilmenite megacrysts and inclusions in diamond are almost identical. The concentrations of trace elements in Mn-ilmenite, compared to picroilmenite, are much greater and their variations are very wide. Chondrite-normalized distribution of trace elements in Mn-ilmenite megacrysts is similar to the distribution in Mn-ilmenites included in diamond. This confirms that Mn-ilmenite in kimberlites is genetically related to diamond. The finds of Mn-ilmenite known before in kimberlitic and related rocks are late- or postmagmatic, metasomatic phases. They either form reaction rims on grains of picroilmenite or other ore minerals, or compose laths in groundmass. In contrast to those finds, Mn-ilmenite megacrysts in Juina kimberlites are a primary mineral phase with a homogeneous internal structure obtained under stable conditions of growth within lower mantle and/or transition zone. In addition to pyrope garnet, chromian spinel, picroilmenite, chrome-diopside, and magnesian olivine, manganoan ilmenite may be considered as another kimberlite/diamond indicator mineral. 相似文献
6.
Chromian spinels from a number of localities were analyzed by proton and electron microprobes to examine the variation of trace elements in different geological environments. Chromian spinels studied include those representing ophiolitic complexes, layered intrusions in continental areas, Alaskan-type complexes, komatiitic subvolcanic sills, Ni sulfide ores and metamorphosed mafic and ultramafic rocks. Nickel concentrations range from 30 to 4690 ppm (proton microprobe), with a mean value of 943 ppm. Nickel, favouring the octahedral sites in the spinel structure, displays an overall increase with a decrease in the Cr/(Cr + Al + Fe3+) ratio. Nickel partitioning between chromian spinel and mantle silicates appears to be primarily dependent upon the major element composition of the chromian spinel. Zinc concentrations range from 230 to 9810 ppm (proton microprobe), with a cluster around 500 ppm. Ophiolitic chromian spinels display the lowest overall Zn values. Zinc levels appear to discriminate between chromian spinels in chromitite samples from those occurring as accessory chromian spinel in dunites or other rock types. Chromian spinels that are enclosed in or adjacent to sulfide grains display higher concentrations of Zn. Zinc, strongly favouring the tetrahedral sites, displays a crude negative correlation with the Mg/(Mg + Fe2+) ratio and appears to vary as a function of temperature. All the chromian spinel grains analyzed contain measurable quantities of Ga by proton microprobe, ranging from 10 to 208 ppm. There is a reciprocal relationship between the Ga concentration and the Cr/(Cr +Al + Fe3+) ratio and a crude positive correlation between the Ni and Ga concentrations. Measured Ga concentrations in chromian spinel and whole rock samples are supportive of the experimental mineral-melt partition coefficient of Malvin and Drake (1987). Similar to the peridotite xenoliths, mid-ocean ridge basalts and oceanic-island basalts, Ga correlates well with Al2O3 in the case of the ophiolitic chromian spinels and most of those representing layered complexes. The ophiolitic chromian spinels seem to have crystallized from melts whose compositions are similar to those of partial melts of the upper mantle. 相似文献
7.
The Abdasht complex is a major ultramafic complex in south-east Iran (Esfandagheh area). It is composed mainly of dunite, harzburgite, podiform chromitites, and subordinate lherzolite and wehrlite. The podiform chromitites display massive, disseminated, banded and nodular textures. Chromian spinels in massive chromitites exhibit a uniform and restricted composition and are characterized by Cr# [= Cr / (Cr + Al)] ranging from 0.76 to 0.77, Mg# [= Mg/(Mg + Fe 2 +)] from 0.63 to 0.65 and TiO 2 < 0.2 wt.%. These values may reflect crystallization of the chromian spinels from boninitic magmas. Chromian spinels in peridotites exhibit a wide range of Cr# from 0.48 to 0.86, Mg# from 0.26 to 0.56 and very low TiO 2 contents (averaging 0.07 wt.%). The Fe 3 +# is very low, (< 0.08 wt.%) in the chromian spinel of chromitites and peridotites of the Abdasht complex which reflects crystallization under low oxygen fugacities.The distribution of platinum group elements (PGE) in Abdasht chromitites displays a high (Os + Ir + Ru)/(Rh + Pt + Pd) ratio with strongly fractionated chondrite-normalized PGE patterns typical of ophiolitic chromitites. Moreover, the Pd/Ir value, which is an indicator of PGE fractionation, is very low (< 0.1) in the chromitites.The harzburgite, dunite and lherzolite samples are highly depleted in PGE contents relative to chondrites. The Pd N/Ir N ratios in dunites are unfractionated, averaging 0.72, whereas the harzburgites and lherzolites show slightly positive slopes PGE spidergrams, together with a small positive Ru anomaly, and their Pd N/Ir N ratio averages 2.4 and 2.3 respectively. Moreover, the PGE chondrite and primitive mantle normalized patterns of harzburgite, dunite and lherzolite are relatively flat which are comparable to the highly depleted mantle peridotites.The mineral chemistry data and PGE geochemistry indicate that the Abdasht chromitites and peridotites were generated from a melt with boninitic affinity under low oxygen fugacity in a supra-subduction zone setting. The composition of calculated parental melts of the Abdasht chromitites is consistent with the differentiation of arc-related magmas. 相似文献
8.
Crystallization of spinel minerals in transitional and alkali basalts from Iceland can be related to the FeO, MgO, TiO 2 and Cr contents of the coexisting melt. Chromian spinel occurs in glasses in which TiO 2 is less than 2.8 wt.% and the weight ratio FeO/MgO is less than 2.0, whereas titanomagnetite occurs when the same parameters are greater than 4 wt.% and 2.7, respectively. In addition, chromian spinel only occurs in basalts with Cr greater than 200 ppm. It is suggested that chromian spinel crystallizes, together with olivine, from liquids with olivine liquidus temperatures ranging from above 1,200° C to approximately 1,150° C. A discontinuity in spinel crystallization follows until below 1,100° C, where titanomagnetite starts to crystallize. Compositional variations in chromian spinel attached to, or included, in homogeneous olivine phenocrysts, however, cannot be related to equilibrium relations. Textural relations suggest homogeneous nucleation for titanomagnetite, whereas chromian spinel nucleates heterogeneously, dependent on growth of olivine phenocrysts. The composition of chromian spinels cannot in detail be related to physical and compositional parameters of the average melt, but may be related to local compositional relations in the melt adjacent to growing crystals. Such compositional variation around growing olivine crystals may be the prime reason for the non-equilibrium precipitation of included chromian spinels. 相似文献
9.
The podiform chromite deposit of the Soghan mafic–ultramafic complex is one of the largest chromite deposits in south-east Iran (Esfandagheh area). The Soghan complex is composed mainly of dunite, harzburgite, lherzolite, pyroxenite, chromitite, wehrlite and gabbro. Olivine, orthopyroxene, and to a lesser extent clinopyroxene with highly refractory nature, are the primary silicates found in the harzburgites and dunites. The forsterite content of olivine is slightly higher in dunites (Fo 94) than those in harzburgites (Fo 92) and lherzolites (Fo 89). Chromian spinel mainly occurs as massive chromitite pods and as thin massive chromitite bands together with minor disseminations in dunites and harzburgites. Chromian spinels in massive chromitites show very high Cr-numbers (80–83.6), Mg-numbers (62–69) and very low TiO 2 content (averaging 0.17 wt.%) for which may reflect the crystallization of chromite from a boninitic magma. The Fe 3 +-number is very low, down to < 0.04 wt.%, in the chromian spinel of chromitites and associated peridotites of the Soghan complex.PGE contents are variable and range from 80 to 153 pbb. Chromitites have strongly fractionated chondrite-normalized PGE patterns, which are characterized by enrichments in Os, Ir and Rh relative to Pt and Pd. Moreover, the Pd/Ir value which is an indicator of PGE fractionation ranges from < 0.08 to 0.24 in chromitite of the Soghan complex. These patterns and the low PGE abundances are typical of ophiolitic chromitites and indicating a high degree of partial melting (about 20–24%) of the mantle source. Moreover, the Pd N/Ir N ratios in dunites are unfractionated, averaging 1.2, whereas the harzburgites and lherzolites show slightly positive slopes PGE spidergrams, together with a small positive Ru and Pd anomaly, and their Pd N/Ir N ratio averages 1.98 and 2.15 respectively.The mineral chemistry data and PGE geochemistry, along with the calculated parental melts in equilibrium with chromian spinel of the Soghan chromitites indicate that the Soghan complex was generated from an arc-related magma with boninitic affinity above a supra-subduction zone setting. 相似文献
10.
The Shergol ophiolitic peridotites along ISZ, Ladakh Himalaya are serpentinized to various degrees and are harzburgite in composition. Electron microprobe analyses of spinels from Shergol Serpentinized Peridotites (SSPs) were carried out in order to evaluate their compositional variation with alteration. Chemical discontinuity was observed from core to rim in analyzed spinel grains with Cr-rich cores rimmed by Cr-poor compositions. From unaltered cores to rims it was observed that Cr 3+# and Fe 3+# increases while Mg 2+# decreases due to Mg 2+ − Fe 2+ and Al 3+ (Cr 3+) − Fe 3+ exchange with surrounding silicates during alteration. These peridotites contain Al-rich spinels forming subhedral to anhedral grains with lobate and corroded grain boundaries; altered to ferritchromite or magnetite along cracks and boundaries by later metamorphism episode. The unaltered Cr-spinel cores are identified as Al-rich and are characterized by lower values of Cr 3+# (0.34–0.40), high Al 3+# (0.58–0.68) and Mg 2+# (0.52–0.70). Mineral chemistry of these Al-rich Cr-spinels suggest that host peridotites have an affinity to abyssal and alpine-type peridotites. High TiO 2 concentration of magmatic Cr-spinel cores are in agreement with MORB melt-residual peridotite interaction. Presence of unaltered magmatic Cr-spinel cores suggest that they do not have re-equilibrated completely with metamorphic spinel rims and surrounding silicates. Cr-spinel core compositions of SSPs suggest an ophiolitic origin derivation by low degrees of melting of a less-moderate depleted peridotite in a mid-ocean ridge tectonic setting. Based on textural and chemical observations the alteration conditions of studied spinel-group minerals match those of transitional greenschist-amphibolite facies metamorphism consistent with estimated metamorphic equilibration temperature of ∼ 500–600 °C. 相似文献
11.
The Neoproterozoic (∼ 820 Ma) Aries micaceous kimberlite intrudes the central Kimberley Basin, northern Western Australia, and has yielded a suite of 27 serpentinised ultramafic xenoliths, including spinel-bearing and rare, metasomatised, phlogopite–biotite and rutile-bearing types, along with minor granite xenoliths. Proton-microprobe trace-element analysis of pyrope and chromian spinel grains derived from heavy mineral concentrates from the kimberlite has been used to define a ∼ 35–40 mW/m 2 Proterozoic geotherm for the central Kimberley Craton. Lherzolitic chromian pyrope highly depleted in Zr and Y, and Cr-rich magnesiochromite xenocrysts (class 1), probably were derived from depleted garnet peridotite mantle at ∼ 150 km depth. Sampling of shallower levels of the lithospheric mantle by kimberlite magmas in the north and north-extension lobes entrained high-Fe chromite xenocrysts (class 2), and aluminous spinel-bearing xenoliths, where both spinel compositions are anomalously Fe-rich for spinels from mantle xenoliths. This Fe-enrichment may have resulted from Fe–Mg exchange with olivine during slow cooling of the peridotite host rocks. Fine exsolution rods of aluminous spinel in diopside and zircon in rutile grains in spinel- and rutile-bearing serpentinised ultramafic xenoliths, respectively, suggest nearly isobaric cooling of host rocks in the lithospheric mantle, and indicate that at least some aluminous spinel in spinel-facies peridotites formed through exsolution from chromian diopside. Fe–Ti-rich metasomatism in the spinel-facies Kimberley mantle probably produced high-Ti phlogopite–biotite + rutile and Ti, V, Zn, Ni-enriched aluminous spinel ± ilmenite associations in several ultramafic xenoliths. U–Pb SHRIMP 207Pb/ 206Pb zircon ages for one granite (1851 ± 10 Ma) and two serpentinised ultramafic xenoliths (1845 ± 30 Ma; 1861 ± 31 Ma) indicate that the granitic basement and lower crust beneath the central Kimberley Basin are at least Palaeoproterozoic in age. However, Hf-isotope analyses of the zircons in the ultramafic xenoliths suggest that the underlying lithospheric mantle is at least late Archean in age. 相似文献
12.
Metamorphosed serpentinites of the Tidding Suture Zone (TSZ), eastern Himalaya, contain variably altered Cr‐spinels that are concentrically zoned from high‐Cr, low‐Fe 3+ spinel at the core to Cr‐magnetite at the rim. Two types of Cr‐spinel have been recognized, based on back‐scattered electron imaging in conjunction with microprobe analytical profiles. Cr‐spinel type‐I is present in the least metamorphosed serpentinite (Cr# = 0.78–0.85, Mg# = 0.38–0.45) and Cr‐spinel type‐II is present in the most highly metamorphosed serpentinite (Cr# = 0.86–0.94, Mg# = 0.10–0.34). Primary igneous compositions are preserved in the type‐I chromites whereas these compositions have been partly or completely obscured by metamorphism and alteration in type‐II grains. The enrichment of Mn and Zn increases from the type‐I (MnO = 1.86–2.42 wt.%, ZnO = 0.77–1.67 wt.%) to type‐II (MnO = 2.72–4.04 wt.%, ZnO = 1.33–3.22 wt.%) and the strong similarity in their distribution patterns implies that these elements were introduced during low‐grade metamorphism and serpentinization. The abundance of Mg‐rich chlorite and serpentine minerals suggest that olivine was the predominant silicate phase before serpentinization. Zn and Mn enrichment in the core zone of the Cr‐spinel is due to the substitution of Mg 2+ and in part of Fe 2+, by Zn and Mn. These elements were probably supplied from olivine upon serpentinization during and after obduction of the ophiolitic mélange along the Tidding Suture Zone in the eastern Himalaya, NE India. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
13.
Total organic carbon content (TOC), trace element and platinum-group element (PGE) concentrations were determined in the black shales of the Lower Cambrian Niutitang Formation in the Nayong area, Guizhou Province, South China, in order to study the polymetallic Ni–Mo–PGE mineralization. The results demonstrate that numerous elements are enriched in the polymetallic ores compared to those of the nearby black shale, particularly Ni, Mo, Zn, TOC and total PGE, which can reach up to 7.03 wt.%, 8.49 wt.%, 11.7 wt.%, 11.5 wt.% and 943 ppb, respectively. The elemental enrichment distribution patterns are similar to those in the Zunyi and Zhangjiajie areas except that the Nayong location is exceptionally enriched in Zn. Whereas positive correlations are observed between the ore elements of the polymetallic ores, no such correlations are observed in the black shale. These positively correlated metallic elements are classified into three groups: Co–Ni–Cu–PGE, Zn–Cd–Pb and Mo–Tl–TOC. The geological and geochemical features of these elements suggest that Proterozoic and Early Palaeozoic mafic and ultramafic rocks, dolomites and/or Pb–Zn deposits of the Neoproterozoic Dengying Formation and seawater could be the principal sources for Co–Ni–Cu–PGE, Zn–Cd–Pb, and Mo–Tl–TOC, respectively. Furthermore, the chondrite-normalized patterns of PGEs with Pd/Pt, Pd/Ir and Pt/Ir indicate that PGE enrichment of the polymetallic ores is most likely related to hydrothermal processes associated with the mafic rocks. In contrast, PGE enrichment in the black shale resembles that of the marine oil shale with terrigenous and seawater contributions. Our investigations of TOC, trace elements and PGE geochemistry suggest that multiple sources along with submarine hydrothermal and biological contributions might be responsible for the formation of the polymetallic Ni–Mo–PGE mineralization in the black shales of the Lower Cambrian Niutitang Formation across southern China. 相似文献
14.
Fluorite-leucophane-melinophane-eudidymite ores of zone XVIII of the Ermakovka F-Be deposit were studied by geological, mineralogical, and thermobarogeochemical methods. Contents of Be and impurity elements (Li, Na, Mg, Al, Si, Cl, K, Mn, Fe, Cu, Zn, Nb, Mo, Ag, Sn, W, and Pb) in fluid inclusions in fluorite of this zone have been first determined by LA-ICP-MS. It is shown that fluorite-leucophane-melinophane-eudidymite ores were formed by alkaline high-F low-salt (6.0-12.5 wt.% NaCl equiv) solutions with a relatively low content of Be (0.0002-1.04 g/kg of solution). Fluorite and beryllium minerals were deposited in ores in a wide range of P-T conditions. The early fluorite-phenakite paragenesis formed at high temperatures (480-650 °C) and high pressures (> 3 kbar). At the late low-temperature stage, phenakite was replaced by Na-Be silicates (eudidymite and melinophane-leucophane) at < 220 °C and < 770 bars. The Be-ore deposition was due to the destruction of a predominant beryllium fluoride-carbonate complex as a result of the crystallization of fluorite during the metasomatic replacement of limestones. Eudidymite and melinophane-leucophane formed at low temperatures under high activity of Na and Ca and low activity of Be and F in highly alkaline solutions. 相似文献
15.
The chrome ores of the abandoned Eretria mine of the East Othris ophiolite occur within a pervasively serpentinized and sheared harzburgite body. They consist of massive chromitites with mylonitic fabric in imbricate shaped pods. Modal analyses of these ores average at about 90–95% chromian spinel (Cr-spinel) and 5–10% secondary silicates. Chromian spinel compositions vary in Cr# [Cr/(Cr + Al) × 100] and Mg# [Mg/(Mg + Fe 2+) × 100] from 44 to 62 and from 59 to 81, respectively. Trace element (Ti, Ni, V, Mn, Zn, Sc, Co and Ga) contents in Cr-spinel do not show significant variations from grain cores to grain boundaries. However, Cr-spinel compositions show depletions in Ti, Zn and Sc when compared to the composition of accessory Cr-spinel from typical mid-ocean ridge basalts (MORB). Mineral inclusions hosted in Cr-spinel comprise a range of (hydrous and anhydrous) silicate and base metal (BM) minerals occasionally intergrown with phosphate minerals and rare intermetallic compounds. A number of these inclusions have Cr-spinel rims with higher Cr# (63–68) than those of the enclosing Cr-spinel grains.The absence of dunite sheaths around chromitites is interpreted as an artifact of dunite structural obliteration during prolonged ductile shearing within harzburgite. The microtextural characteristics of a number of inclusions in Cr-spinel imply that they were initially fully molten. Furthermore, primary hydrosilicate (amphibole, phlogopite) inclusions in Cr-spinel indicate that chromitites crystallized from a water-bearing melt. Chromian spinel rims around silicate inclusions probably represent early crystals generated from a primitive magma produced by melting of a depleted mantle source.Geochemical calculations demonstrate that the parental melts of chromitites had intermediate affinity between MORB and arc-related magmas. Our preferred hypothesis for the genesis of the Eretria chromitites is that they were formed from a melt originated within the hydrated mantle wedge beneath a nascent forearc basin during subduction initiation. 相似文献
16.
The fresh and weathered garnet amphibolites, from the Akom II area in the Archaean Congo Craton, were investigated to determine the S, Cu, Ni, Cr, and Au-PGE values. The garnet amphibolites are composed of amphibole, plagioclase, garnet, quartz, and accessory apatite, spinel, sericite, pyrite, chalcopyrite and non-identified opaque minerals. The presence of apatite, sericite, and two generations of opaque minerals suggests that they might be affected by hydrothermal alteration. They are characterized by moderate Al 2O 3, Fe 2O 3, CaO, V, Zn, and Co contents with negative Eu- and Ce-anomalies. The sulfur concentrations are variable (380–1710 ppm). According to the sulfur contents, amphibolites can be grouped into two: amphibolites with low contents, ranging between 380 and 520 ppm (av. = 457 ppm); and amphibolites with elevated contents, varying from 1140 to 1710 ppm (av. = 1370 ppm). Amphibolites contain contrast amounts of Cu (∼ 1800 to 5350 ppm) while nickel contents attain 121 ppm. Chromium contents vary from 43 to 194 ppm. Sulfur correlates positively with Cu and Cr, but negatively with Ni and Ni/Cr ratio. The total Au-PGE contents attain 59 ppb.The presence of amphibole and feldspars confirms the low degree of amphibolite weathering. The secondary minerals are constituted of kaolinite, gibbsite, goethite and hematite. Despite the accumulation of some elements, the major and trace element distribution is quite similar to that of fresh amphibolites. Nevertheless, the weathering processes lead to the depletion of several elements such as S (239–902 ppm), Cu (520–2082 ppm), and Ni (20–114 ppm). Chromium and Au-PGE show an opposite trend marked by a slight enrichment in the weathered amphibolites. Amidst the Au-PGE, Pd (60 ppb) and Pt (23 ppb) have elevated contents in the fresh rocks as well as in the weathered materials. The PPGE contents are much higher than IPGE contents in both types of materials. The Pd/Pt, Pd/Rh, Pd/Ru, Pd/Ir, Pd/Os, and Pd/Au values indicate that Pt, Rh, Ru, Ir, Os and Au are more mobile than Pd. Chondrite-normalized base metal patterns confirm the abundance of Pd and the slight enrichment of Au-PGE in weathered rocks. Palladium, Rh and Ir are positively correlated with S. Conversely Pt and Ru are negatively correlated with S and Au is not correlated with S. Despite the high and variable S and Cu contents, the garnet amphibolites possess low Au-PGE and other base metals contents. 相似文献
17.
High-Cr podiform chromitites hosted by upper mantle depleted harzburgite were investigated for PGM and other solid inclusions from Faryab ophiolitic complex, southern Iran. Chemical composition of the chromian spinels, Cr#[100*Cr/(Cr+Al) = 77–85], Mg# [100*Mg/(Mg+Fe 2+) = 56–73], TiO 2≤0.25wt%, and the presence of abundant primary hydrosilicates included in the chromian spinels indicate that the deposits were formed from aqueous melt generated by high degree of partial melting in a suprasubduction zone setting. Solid phases hosted by chromian spinel grains from the Faryab ophiolitic chromitites can be divided into three categories: PGM, base-metal minerals and silicates. Most of the studied PGM occurred as very small (generally less than 20 μm in size) primary single or composite inclusions of IPGE-bearing phases with or without silicates and base metal minerals. The PGM were divided into the three subgroups: sulfides, alloys and sulfarsenides. Spinel-olivine geothermometry gives the temperatures 1,131–1,177 °C for the formation of the studied chromitites. At those temperatures, fS 2 values ranged from 10 ?3 to 10 ?1 and provided a suitable condition for Ru-rich laurite formation in equilibrium with Os-Ir alloys. Progressive crystallization of chromian spinel was accompanied by increase of fS 2 in the melt. The formation of Os-rich laurite, erlichmanite and then sulfarsenides occurred by increase of fS 2 and slight decrease in temperature of the milieu. The compositional and mineralogical determinations of PGM inclusions respect to their spatial distribution in chromian spinels show that the minerals regularly distributed within the chromitites, reflecting cryptic variation consistent with magmatic evolution during host chromian spinel crystallization. 相似文献
18.
The Coniacian-Santonian high-phosphorus oolitic iron ore at Aswan area is one of the major iron ore deposits in Egypt. However, there are no reports on its geochemistry, which includes trace and rare earth elements evaluation. Texture, mineralogy and origin of phosphorus that represents the main impurity in these ore deposits have not been discussed in previous studies. In this investigation, iron ores from three localities were subjected to petrographic, mineralogical and geochemical analyses. The Aswan oolitic iron ores consist of uniform size ooids with snowball-like texture and tangentially arranged laminae of hematite and chamosite. The ores also possess detrital quartz, apatite and fine-grained ferruginous chamosite groundmass. In addition to Fe 2O 3, the studied iron ores show relatively high contents of SiO 2 and Al 2O 3 due to the abundance of quartz and chamosite. P 2O 5 ranges from 0.3 to 3.4 wt.% showing strong positive correlation with CaO and suggesting the occurrence of P mainly as apatite. X-ray diffraction analysis confirmed the occurrence of this apatite as hydroxyapatite. Under the optical microscope and scanning electron microscope, hydroxyapatite occurred as massive and structureless grains of undefined outlines and variable size (5–150 μm) inside the ooids and/or in the ferruginous groundmass. Among trace elements, V, Ba, Sr, Co, Zr, Y, Ni, Zn, and Cu occurred in relatively high concentrations (62–240 ppm) in comparison to other trace elements. Most of these trace elements exhibit positive correlations with SiO 2, Al 2O 3, and TiO 2 suggesting their occurrence in the detrital fraction which includes the clay minerals. ΣREE ranges between 129.5 and 617 ppm with strong positive correlations with P 2O 5 indicating the occurrence of REE in the apatite. Chondrite-normalized REE patterns showed LREE enrichment over HREE ((La/Yb) N = 2.3–5.4) and negative Eu anomalies (Eu/Eu* = 0.75–0.89). The oolitic texture of the studied ores forms as direct precipitation of iron-rich minerals from sea water in open space near the sediment-water interface by accretion of FeO, SiO 2, and Al 2O 3 around suspended solid particles such as quartz and parts of broken ooliths. The fairly uniform size of the ooids reflects sorting due to the current action. The geochemistry of major and trace elements in the ores reflects their hydrogenous origin. The oolitic iron ores of the Timsha Formation represent a transgressive phase of the Tethys into southern Egypt during the Coniacian-Santonian between the non-marine Turonian Abu Agag and Santonian-Campanian Um Barmil formations. The abundance of detrital quartz, positive correlations between trace elements and TiO 2 and Al 2O 3, and the abundance mudstone intervals within the iron ores supports the detrital source of Fe. This prediction is due to the weathering of adjacent land masses from Cambrian to late Cretaceous. The texture of the apatite and the REE patterns, which occurs entirely in the apatite, exhibits a pattern similar to those in the granite, thus suggesting a detrital origin of the hydroxyapatite that was probably derived from the Precambrian igneous rocks. Determining the mode of occurrence and grain size of hydroxyapatite assists in the maximum utilization of both physical and biological separation of apatite from the Aswan iron ores, and hence encourages the use of these ores as raw materials in the iron making industry. 相似文献
19.
Determination of multispectral specular reflectance is an important tool for ore identification in reflected light microscopy, and may be used for automated characterization of ores. However, reflectance values can be affected by compositional variations in a way that is seldom understood. The aim of the present work is to investigate this problem in chromite, an ore whose composition may show typically large natural variations as member of the spinel family, and whose relatively high reflectance variations are apparently unpredictable. For this research, eighteen samples of chromian spinel covering a large range of compositions in the base of the Hagerthy prism were selected for microprobe analysis and reflectance measure on polished sections. The samples belong to a variety of deposits and types (ultramafic massif, ophiolitic, and metamorphosed types: Ojén and Ronda Massifs, Spain; Mayarí, Moa-Baracoa, Camagüey and Sagua de Tánamo, Cuba; Golyamo Kemenyane, Avren and Yakovitsa, Bulgaria). The specular reflectances are characterized as multispectral values, measured at thirteen intervals (50 nm each) in the VNIR region (Visible and Near-Infrared: 400–1000 nm), using the automated CAMEVA System.The relationship between compositional and reflectance values is studied by multivariate analysis and subsequently tested on independent samples. For this purpose, the samples have been grouped in two sets: a larger population of fifteen samples constitutes the initial data set for mathematical processing, while a selection of three samples of widely differing compositions is used to test the resulting functions, so as to gain a critical appraisal of their validity.The results obtained show that the specular reflectance of chromite depends on composition and can be used to estimate compositional parameters, as #Cr = Cr/(Cr + Al) or #Mg = Mg/(Mg + Fe 2+), but this relationship is complex and does not allow simple direct determinations, due to the multiplicity of possible changes and coupled substitutions (e.g. Al–Cr–Fe 3+, or Mg-Fe 2+, Ni, Zn, Ti …) in the chromian spinel family. On the other hand, the relationship of chromite composition with deposit type is also detectable through the reflectance values, but with a higher uncertainty. Reflectance increases with increasing Cr and Fe 3+ contents in all cases, but the relationship of reflectance with Mg seems to be specific of the deposit type: while reflectance increases with increasing #Mg in the Ojén chromites, it shows the opposite behaviour in podiform chromites. Although these results should be regarded as preliminary until further studies on larger sample populations can be achieved, they are suggestive of possible practical applications for exploration, e. g. to approach Cr-spinel compositions or chromite deposit typology, early in an exploration campaign, by inexpensive reflected light determination of specular reflectance in a few samples. 相似文献
20.
Cu-rich massive sulfide deposits associated with mafic–ultramafic rocks in the southern portion of the Main Urals Fault (MUF) are characterized by variable enrichments in Ni (up to 0.45 wt.%), Co (up to 10 wt.%) and Au (up to 16 ppm in individual hand-specimens). The Cu (Ni–Co)-rich composition of MUF deposits, as opposed to the Cu (Zn)-rich composition of more eastward massive sulfide deposits of broadly similar age along the western flank of the Magnitogorsk arc, reflects the abundance of seafloor-exposed, Ni–Co-rich ultramafic rocks in the most external portion of the Early-Devonian Magnitogorsk forearc. Morphological, textural, and compositional differences between individual deposits are interpreted to be the result of the sulfide deposition style and, in part, of the original subseafloor lithology. One deposit produced by dominantly on-seafloor hydrothermal processes is characterized by pyrite–marcasite ≫ pyrrhotite, not so low Zn grades (occasionally up to 2 wt.%), abundant clastic facies and periodical superficial oxidation. Deposits produced by dominantly subseafloor hydrothermal processes are characterized by pyrrhotite > pyrite, very low Zn (generally < to ≪ 0.1 wt.%), volumetrically minor clastic facies, and multi-layer deposit morphology. Very low Ni/Co ratios in the on-seafloor deposit may indicate a dominant metal contribution from a mafic rather than ultramafic source. The sulfide mineralization was associated with extensive hydrothermal alteration of the host ultramafic and mafic rocks, leading to formation of abundant talc, talc–carbonate and chlorite rocks. Occurrence of large volumes of such altered lithotypes in ophiolitic belts may be considered as a potential searching criteria for MUF-type (Cu, Co, Ni)-deposits. In spite of the contrasting geodynamic environment, geological, geochemical, textural and mineralogical peculiarities of the MUF deposits in many respects are similar to those of ultramafic-hosted massive sulfide deposits along the Mid-Atlantic Ridge. In geological time, supra subduction-zone settings appear to have been more effective than mid-ocean ridge settings for preservation of ultramafic-hosted massive sulfide deposits. 相似文献
|