共查询到20条相似文献,搜索用时 187 毫秒
1.
利用透射电子显微术(TEM)对两个新生代裂谷区的碱性玄武岩(法国中央地块克莱蒙菲朗及中朝板块北部河北万全)中幔源矿物橄榄石的位错亚构造进行研究,通过位错类型、衍射花样、柏格斯矢量及位错滑移系的分析及计算,判断了深源包体从上地幔进入地壳的动力学过程——经历了高温(>1000℃)蠕变、低温(<600℃—800℃)应变及后期局部温度回升阶段,确定了高温滑移系以{OKl}[100]及(001)[100]为主,并存在由(010)[001]及(100)[001)滑移系组成的高温位错网络,计算了低温应变的滑移系为(110)[001]及(010)[001]。 相似文献
2.
通过弗氏台及透射电子显微镜(TEM)手段,对阿拉善地区金川、野芨里、下盐路塘和小松山等超基性岩岩体主要造岩矿物——橄榄石的组构及超微构造进行了研究,两种手段所获得的结果基本一致。它们的位错组态均以位错列及多层结构为主,布氏矢量(?)以c[001]为主,滑移系为(010)[001]。这些特点与橄榄石晶体均以[001]取向,并形成高极密及(010)[001]组构类型相对应。根据有关橄榄石变形实验研究,它们都属于低温(<800℃)、高应变速率的滑移系。由此说明,是下地壳环境的产物。但岩体之间尚存在一定的差异,就其活动性而论,金川岩体成岩演化过程表现相对稳定,其余岩体则处于较为活跃的构造环境中,前者所受的构造应力较弱,而后者较强。这可能就是该区成矿情况有别的原因之一。 相似文献
3.
超高压变质岩提供了研究大陆俯冲隧道中岩石的变形机制和流变差异性的窗口。文章使用电子背散射衍射技术分析了大别山超高压变质带的榴辉岩和长英质片麻岩的显微构造。榴辉岩中的石榴子石基本呈无序分布,绿辉石发育较强烈的晶格优选定向,[001]轴的极密平行或近平行于拉伸线理,(100)面的法线近垂直于面理,退变榴辉岩中角闪石的(100)[001]组构可能继承了绿辉石的晶格优选定向。退变榴辉岩和长英质片麻岩中的石英记录了(0001)低温底面滑移和{1010}中温
柱面滑移,反映了超高压变质岩折返到中地壳的韧性变形;而斜长石的(001)<110>和(010)[100]组构形成于折返到下地壳的角闪岩相变质条件(>600℃)。根据主要矿物的流变律计算了俯冲与折返过程中无水矿物的有效黏度变化。俯冲过程中,钠长石=硬玉+石英的分解反应以及石英-柯石英相变导致长英质片麻岩的有效黏度和密度都显著增高,有利于陆壳深俯冲。但是折返过程中由于温度较高,这两个反应带来的有效黏度变化较小。>80 km深度,石榴子石的流变强度>硬玉>绿辉
石>柯石英,俯冲上地壳的流变由柯石英和硬玉控制,下地壳的流变由绿辉石和石榴子石控制。超高压变质岩流变强度的差异有助于上—下地壳力学解耦,使相对低密度、低黏度的上地壳物质在俯冲隧道内快速折返。 相似文献
4.
甘肃金川二矿区镁铁-超镁铁岩体中橄榄石具有明显的矿物定向排列特征。通过对岩体中二辉橄榄岩、斜长二辉橄榄岩及含二辉石橄榄岩的造岩矿物橄榄石进行组构特征研究,发现均表现出"A"型组构特征,Nm[001]表现为在面理上的点极密,表明其滑移方向为[001]。结合Ng[100]、Np[010]组构特征,其滑移面应为(100)和(010),反映低温组构滑移系为(100)[001]或(010)[001],表明二矿区岩体橄榄石形成于地壳浅部低压、低应力状态下。由于二矿区岩体为金川矿床第二期含矿岩浆上侵产物,结合岩体所受的构造应力场的变化特征,可初步认定二矿区岩体中橄榄石定向排列的现象为成矿期构造的反映,且橄榄石光轴发生了自西向东的旋转,这也与李区域组构特征的研究相一致。 相似文献
5.
本文利用野外构造解析、透射电镜、岩组等手段,对大别山地区超高压岩石的变形表象及变形机制进行了详细的观察和研究,从而动态地建立了超高压岩石折返的PTtD轨迹。结果表明:超高压石榴橄榄岩经历了高温和低温两种变形,其中橄榄石中发育高温[001](100)和中低温[010](100)两种滑移系。超高压榴辉岩中绿辉石的位错构造发育,位错密度为4.98×10~7/cm~2。绿辉石亚颗粒的特征显示存在颗粒边界迁移和扩散蠕变。绿辉石的组构测定表明,绿辉石晶内塑性流动形成了[001]极密,该极密平行于线理,属L型收缩组构。组构对称型显示本区榴辉岩以共轴变形为主,由于应变分解,部分地区含非共轴成分。付林图解表明,绿辉石和石榴子石的变形均属于收缩型椭球,拉伸型应变,这与绿辉石组构测定结果一致。石榴子石位错密度为3.54×10~7/cm~2,部分地区的石榴子石发育动态重结晶及核幔构造等,形成榴辉岩相糜棱岩。另外根据不同超高压岩石中石英的位错密度或亚颗粒大小,计算了超高压岩石折返时各个阶段的应力大小。 相似文献
6.
利用透射电子显微术(TEM)对两个新生代裂谷区的碱性玄武岩(法国中央地块克莱蒙菲朗及中朝板块北部河北万全)中漫源矿物橄榄石的位错亚构造进行研究,通过位错类型、衍射花样、柏格斯矢量b^→及位错滑移系的分析及计算,判断了深源包体从上地幔进入地壳的动力学过程-经历了高温(>1000℃)蠕变、低温(<600℃-800℃)应变及后期局部温度回阶段,确定了高温滑移系以{0kl}[100]及(001)[100]为主,并存在由(010)[001]及(100)[001]滑移系组成的高温位错网络,计算了低温应变的滑移系为(11)[001]及(010)[001]。 相似文献
7.
超高压变质矿物的某些显微构造缺陷可能指示了岩石短暂和快速抬升过程。文中报道了中国大别山双河地区超高压硬玉石英岩矿物显微构造缺陷的透射电镜(TEM)和Fourier变换红外光谱(FTIR)的研究结果。用TEM研究方法,在硬玉石英岩中硬玉包裹体内发现了亚微米级天然蒙钠长石(MA,C2/m)、高钠长石(HA,C)和低钠长石(LA,C)三种多形变体。表明岩石在折返过程经历过高温变质作用(>930℃),以及退变质过程的快速冷却;在石英包裹体内发现了纳米级柯石英和石盐子矿物,提供了柯石英转变为石英以及峰期变质条件下高盐流体存在的证据。"名义上无水矿物"(NAMs)的结构水(OH/H2O)是以缺陷形式赋存于矿物结构中。FTIR分析结果显示硬玉、石榴石、金红石和石英中结构水的平均含量分别为1000×10-6、(900~1600)×10-6、>2000×10-6和<4×10-6,硬玉石英岩全岩含水量为(490~600)×10-6,表明在高压-超高压变质作用过程中,地壳或原岩中的水可以通过这些NAMs携带到地球深部。该类显微构造缺陷可能是大陆碰撞造山带在高应变速率下的局部弱化和深部断层作用的结果。 相似文献
8.
本文通过一组c轴与主应力(σ_1)夹角ψ不同的人工合成石英单晶体定向样品的实验变形,研究了主应力取向对石英晶体滑移系开动的影响。研究表明,主应力取向对石英晶体滑移系的可动性有明显影响:在450—650℃温度,300—500MPa围压条件下,当ψ=0°时,石英滑移系不开动;ψ=90°时,(001)[100]、(011)[111]等底面或锥面的滑移系有微小动作;ψ=45°时,石英晶体滑移系可动性最好。在这种温度压力条件下,石英晶体的位错沿开动的滑移系运动是石英产生塑性变形的直接原因。 相似文献
9.
商丹糜棱岩带岩湾、沙沟和商南等3个区段石英C-轴组构和显微构造特征表明,该带自西向东石英C-轴组构形式由单一环带型转为Y-轴方向的点极密型,然后变为Ⅰ型交叉环带型,构造变形环境从低绿片岩相过渡到中-高绿片岩相,然后变为高绿片岩相-低角闪岩相。构造变形环境差异是造成石英组构形式变化的主要因素。随着温压条件的升高,石英滑移系从以底面〈a〉滑移系和柱面〈a〉滑移系的共同作用为主转向以单一柱面〈a〉滑移系为主,进而底面〈a〉滑移系和柱面〈a〉滑移系又重新变得活跃,且菱面滑移系的作用也变得十分重要。 相似文献
10.
平南幔源包体中橄榄石的显微构造研究及其意义 总被引:1,自引:0,他引:1
平南玄武岩中的尖晶石二辉橄榄岩包体的平衡温度为930~980℃, 平衡深度为59~74km, 包体中橄榄石的扭折带滑移系多为(010) [100], 但也有(001) [100]的滑移系类型; 斜方辉石的滑移系为(100) [001], 它们均为高温低应变速率下的滑移系, 说明该区的上地幔主要是在高温低应变速率条件下经历了塑性变形作用.橄榄石位错组态多样, 有自由位错、位错壁、位错弓弯、缠结、{110}滑移带, 反映了上地幔的塑性变形特征.根据位错壁的大小估算, 上地幔差异流动应力为24.5~42.1MPa, 流动速率为2.93×10-17~8.36×10-16s-1, 有效粘度为1.72×1023~2.80×1024 Pa·s, 特征与中国东部新生代上地幔较为一致, 反映同处于拉张环境. 相似文献
11.
ThereisanunanimousunderstandingthattheUHPmetamorphisminDabie-SuluareaswasformedduringtheTri-assiccollisioneventbetweentheYangtzeandNorthChinacratons(Congetal.,l994$Zhouetal-,l996;Liouetal.,l994)-Eclogiteisthemostimportantrocktypeamongtheul-trahigh-pressure(UHP)metamorphicrocks.Accordingtotheiroccurrencethereare3typesofeclogites:typeIisen-clavesinultramaficintrusionsandasmembersinthelayeredmafic-ultramaficcomplex(Jahnl998);typeIispodsorlay-ersinthehighlymetamorphicsupracrustals(mainlying… 相似文献
12.
Quantitative analysis of the structural evolution of jadeite‐quartzite, a rare ultra‐high pressure (UHP) rock type from the Dabie Mountains of eastern China, sheds light on the formation and evolution of UHP orogenic belts worldwide. Geological mapping of the Shuanghe area, where jadeite‐quartzites crop out, was carried out to determine the spatial relationships between different UHP rocks within this orogen. The deformation mechanisms of jadeite‐quartzite, geodynamical parameters (stress, strain, strain rate), and microstructure including lattice preferred orientation (LPO) were determined from six jadeite‐quartzite samples from the Shuanghe area. LPOs of clinopyroxene (jadeite and omphacite), garnet, rutile and quartz from these jadeite‐quartzite samples are compared with those of three eclogites preserving different degrees of deformation from the Shuanghe area. Microstructural LPOs of jadeite, omphacite, garnet, rutile and quartz were determined using electron backscattered diffraction (EBSD) analysis. Quartz fabrics were largely recrystallized during late, low‐grade stages of deformation, whereas garnet shows no strong LPO patterns. Rutile fabrics show a weak LS fabric along [001]. Jadeite and omphacite show the strongest eclogite facies LPO patterns, suggesting that they may provide important information about mantle deformation patterns and control the rheology of deeply subducted continental crust. Microstructural data show that the jadeite LPO patterns are similar to those of omphacite and vary between L‐ and S‐types, which correlate with prolate and oblate grain shape fabrics (SPO); quartz LPOs are monoclinic. Microstructural analysis using TEM shows that the dominant slip systems of jadeite in one sample are (100)[001], (110)[001] and (1 1 0)1/2[110], while in another sample, no dislocations are observed. Abundant dislocations in quartz were accommodated by the dominant slip system (0001)[110], indicating basal glide and represents regional shearing during the exhumation process. This suggests that dislocation creep is the dominant fundamental deformation mechanism in jadeite under UHP conditions. The protoliths of jadeite‐quartzite, metasedimentary rocks from the northern passive continental margin of the Yangtze craton, experienced the same deep subduction and were deformed under similar rheological conditions as other UHP eclogite, marble and paragneiss. Experimental UHP deformation of quartzo‐feldspathic gneiss with a chemical composition similar to the bulk continental crust has shown that the formation of a jadeite–stishovite rock is associated with a density increase of the host rock similar to the eclogite conversion from basaltic protoliths. The resulting rock can be denser than the surrounding mantle pyrolite up to depths of 660 km (24 GPa). Thus, processes of deep continental subduction may be better‐understood through understanding the rheology and mechanical behaviour of jadeite. Jadeite‐quartzites such as those from the Shuanghe may be exhumed remnants of deeply‐subducted slabs of continental crust, other parts of which subducted past the ‘depth of no return’, and remain in the deep mantle. 相似文献
13.
Kanfenggou UHP Metamorphic Fragment in Eastern Qinling Orogen and Its Relationship to Dabie-Sulu UHP and HP Metamorphic Belts, Central China 总被引:3,自引:0,他引:3
SuoShutian ZhongZengqiu ZhouHanwen YouZhendong 《中国地质大学学报(英文版)》2003,14(2):95-102
In the Central Orogenic Belt, China, two UHP metamorphic belts are discriminated mainly based on a detailed structural analysis of the Kanfenggou UHP metamorphic fragment exposed in the eastern Qinling orogen, and together with previous regional structural, petrological and geochronological data at the scale of the orogenic domain. The first one corresponds to the South Altun-North QaidamNorth Qinling UHP metarnorphic belt. The other is the Dabie-Sulu UHP and HP metamorphic belts. The two UHP metamorphic belts are separated by a series of tectonic slices composed by the Qiniing rock group, Danfeng rock group and Liuling or Foziling rock group etc. respectively, and are different in age of the peak UHP metamorphism and geodynamic implications for continental deep subduction and collision. Regional field and petrological relationships suggest that the Kanfenggou UHP metamorphic fragment that contains a large volume of the coesite- and microdiamond-bearing eclogite lenses is compatible with the structures recognized in the South Altun and North Qaidam UHP metamorphic fragments exposed in the western part of China, thereby forming a large UHP metamorphic belt up to 1000 km long along the orogen strike. This UHP metamorphic belt represents an intercontinental deep subduction and collision belt between the Yangtze and Sino-Korean cratons, occurred during the Paleozoic. On the other hand, the well-constrained Dabie-Sulu UHP and HP metamorphic belts occurred mainly during Triassic time (250-220 Ma), and were produced by the intracontinental deep subduction and collision within the Yangtze craton. The Kanfenggou UHP metamorphic fragment does not appear to link with the DabieSulu UHP and HP metamorphic belts along the orogen. There is no reason to assume the two UHP metamorphic belts as a single giant deep subduction and collision zone in the Central Orogenic Belt situated between the Yangtze and Sino-Korean cratons. Therefore, any dynamic model for the orogen must ac-count for the development of UHP metarnorphic rocks belonging to the separate two tectonic belts of different age and tectono-metamorphic history. 相似文献
14.
从Pb同位素组成看东秦岭官坡超高压变质岩片的走势 总被引:1,自引:0,他引:1
通过研究表明,东秦岭官坡超高压变质岩片具有较高的放射性成因铅同位素组成:^206Pb/^204Pb=18.089~18.772,^207Pb/^204Pb=15.571~15.631,^208Pb/^204Pb=38.299~38.829。其铅同位素组成与秦岭岩群及二郎岩坪群一致,而与大别超高压变质带有明显的区别。结合构造分析可以判断,东秦岭超高压变质带与大别超高压变质带是两个不同的构造带,中央造山带内可能至少发育有两条超高压变质带。 相似文献
15.
Fluid Evolution during HP and UHP Metamorphism in Dabie Shan, China: Constraints from Mineral Chemistry, Fluid Inclusions and Stable Isotopes 总被引:23,自引:1,他引:23
XIAO YILIN; HOEFS JOCHEN; VAN DEN KERKHOF ALFONS M.; SIMON KLAUS; FIEBIG JENS; ZHENG YONG-FEI 《Journal of Petrology》2002,43(8):1505-1527
The Dabie Shan ultrahigh-pressure (UHP) metamorphic terraneis located in the eastern part of the eastwest-strikingQinlingDabie orogenic belt in China. A major mylonitizedcontact zone of 200300 m width divides Dabie Shan intothe South Dabie Terrane (SDT) and the North Dabie Complex (NDC).Combined investigation of major and trace element geochemistry,fluid inclusions, and oxygen and hydrogen isotopes constrainsthe fluid history during the metamorphic evolution of the twometamorphic belts, which differ in their fluid and metamorphicevolution. Fluid inclusions in rocks from the SDT are mainlyaqueous with varying salinities, whereas those from the NDCare dominated by CO2. Low 相似文献
16.
INTRODUCTION Anew ultrahigh pressure ( UHP) metamorphicbelt ,the South Altun-North Qaidam-North QinlingUHP metamorphic belt ,has been recently discoveredand widely discussed by different workers (Yang J Set al .,2003 ,2002 ,2001 ,2000 ,1998 ;Zhang J Xetal .,2002 ,1999 ; Zhang G et al .,2001 ; Hu et al .,1996 ,1995 ,1994) . Detailed studies have also beencarried out onthe Dabie-Sulu UHP/ HP metamorphicbelt inthe central orogenic belt (COB) of China (Gaoet al .,2002 ;Sun et al … 相似文献
17.
三维P波速度解析研究结果表明,苏鲁-大别超高压变质带岩石圈地壳速度结构均具有上地壳明显高速且上凸、中地壳增厚、下地壳埋藏较深且莫霍面下凹等基本特征。与大别地区相比较,苏鲁超高压变质带存在着上地壳波速更高,且地表高速区面积与上地壳高速体体积大于大别;而莫霍面下凹程度不如大别地区,地壳山根已逐步趋向消失等独特的区域特征。显示了苏鲁地区曾发生过更激烈的俯冲与折返构造运动,与大别地区相比,有更多高速、高密度的超高压变质岩折返到上地壳与地表;然而在造山运动过程中比大别更早进入了造山运动后期等特征。对比研究结果表明,苏鲁-大别地段的造山、演化过程中,在构造运动基本相似的背景下,存在着区域性特征。苏鲁地区的造山运动以及超高压变质作用,有起始略晚、发生时期较短但相对激烈、结束早、比大别更早进入了造山运动的后期等特征。笔者分析了苏鲁区域性特征形成的主要构造原因是,郯庐断裂带的大规模左旋走滑运动以及通过中国华北区域的大范围NXV—SE向扩张应力场的影响。其中,中生代以来大华北地区的大区域扩张应力场的影响可能是该区俯冲到地幔内的超高压变质岩能够大量折返回地表或上地壳的重要构造原因。 相似文献
18.
大别山北部榴辉岩和英云闪长质片麻岩锆石U-Pb年龄及多期变质增生 总被引:50,自引:3,他引:47
大别山北部榴辉岩及英云闪长质片麻岩的锆石U-Pb年龄分析表明:北部榴辉岩相峰期变质时代为226~230Ma左右;北部塔儿河一带英云闪长质片麻岩经历过印支期变质事件;大别山北部与南部超高压岩石中一致的(226~230Ma)高压或超高压变质年龄表明,北部镁铁-超镁铁质岩带中部分岩石也曾作为扬子俯冲陆壳的一部分,在印支期发生过高压或超高压变质作用;本区锆石发生过两期变质增生事件,一是印支期高压或超高压变质,另一期是燕山期热变质事件;榴辉岩及英云闪长质片麻岩的原岩形成时代为晚元古代;锆石U-Pb年龄可用多期变质增生模型来解释。 相似文献
19.
硬玉石英岩是一种稀少且与流体作用相关的变质岩,同时出露于高压或超高压洋壳和陆壳俯冲带中.通过对中国东部大别造山带中出露达50 km2的含柯石英的超高压硬玉石英岩进行研究,综合全岩主微量元素、矿物Mg-O同位素和锆石学研究.结果表明,硬玉石英岩的原岩为古元古代TTG岩石,经历过弱化学风化和强物理风化作用,然后在三叠纪时期受到围岩富黑云母片麻岩分解脱水而产生的大量重Mg同位素流体交代,从而形成硬玉石英岩.考虑到这种受流体交代成因的硬玉石英岩在大别山广泛出露,表明其在三叠纪大陆深俯冲过程中存在着大规模的变质流体活动,这项研究首次报道了大陆俯冲带有大规模的流体活动存在,同时也挑战了传统观点认为的大陆俯冲带缺乏岛弧岩浆作用主要原因是缺乏足够量的流体活动. 相似文献
20.
大别造山带地壳泊松比结构与超高压变质带—来自宽角反射与近垂直反射剖面的启示 总被引:3,自引:0,他引:3
综合宽角反射、近垂直反射的探测结果和有关地质资料,对大别造山带地壳结构和超高压变质带研究显示:大别造山带地壳具有层块结构特征。沿安义-庄墓剖面,上地壳有7个弹性块体,中地壳有5个,下地壳有4个。扬子与华北地块的主缝合带是超高压变质带,扬子地块与大别造山带的现今分界线是与郯庐断裂相交的太湖-马庙断裂,磨子潭-晓天断裂是大别造山带的北界,北淮阳构造带呈楔状向下插入,它与华北地块的分界是肥中断裂。郯庐断裂在中、上地壳近于直立,下地壳向西倾斜。超高压变质带的厚度为5-7km,产状向北插入到北大别块体之下,折返过程是构造就位,不是大别山的均匀抬升,折返的主运动面是水吼-五河高温剪切带。 相似文献