考虑一阶系统参与组合的复模态分解反应谱法

对地震作用下结构反应的复模态分解反应谱法进行了研究,指出在复模态分解反应谱法中,具有实特征值的模态不必组成二阶振动系统,可按一阶线性系统参与模态组合,且一阶线性系统只需要一条反应谱。给出了相应的复模态完全平方组合(CCQC)系数计算公式,该公式包括了一阶系统响应的相关函数和一阶系统响应与二阶系统响应之间的相关函数。通过算例验证了方法的可行性。     

Damping‐adjusted combination rule for the response spectrum analysis of base‐isolated buildings

The classical response spectrum method continues to be the most popular approach for designing base‐isolated buildings, therefore avoiding computationally expensive nonlinear time‐history analyses. In this framework, a new method for the seismic analysis and design of building structures with base isolation system (BIS) is formulated and numerically validated, which enables one to overcome the main shortcomings of existing techniques based on the response spectrum method. The main advantages are the following: first, reduced computational effort with respect to an exact complex‐valued modal analysis, which is obtained through a transformation of coordinates in two stages, both involving real‐valued eigenproblems; second, effective representation of the damping, which is pursued by consistently defining different viscous damping ratios for the modes of vibration of the coupled BIS‐superstructure dynamic system; and third, ease of use, because a convenient reinterpretation of the combination coefficients leads to a novel damping‐adjusted combination rule, in which just a single response spectrum is required for the reference value of the viscous damping ratio. The proposed approach is specifically intended for design situations where (i) the dynamic behaviour of seismic isolators can be linearised and (ii) effects of nonproportional damping, as measured by modal coupling indexes, are negligible in the BIS‐superstructure assembly. Copyright © 2012 John Wiley & Sons, Ltd.     

基于复振型分解的多自由度非线性体系动力可靠性研究

提出了基于复模态理论的多自由度非线性体系动力可靠性分析方法。该方法首先采用等效线性化的方法处理体系的非线性问题,然后采用复模态分析处理非经典的等效线性阻尼矩阵,将具有非经典阻尼的等效多自由度线性体系按复振型分解,将多自由度体系的随机反应分解为一系列一阶体系的复模态反应,从而求得体系的随机反应,最后进行体系的动力可靠度计算。通过算例验证,表明该方法概念明确、思路清晰,为一般多自由度非线性体系提供了一个普遍适用的动力可靠性分析方法。     

Interval complete quadratic combination rule for the response spectrum analysis of buildings with accidental eccentricity

The accidental torsion, caused by several sources of structural uncertainties, gets the elastic response of a building different from that computed. To take into account of these uncertainties, building codes impose the introducing in every storey of the buildings an artificial eccentricity, called accidental, as a fraction of the plan dimension. Because, according to building codes, the accidental eccentricity can mathematically be expressed as a modification of the mass matrix, it follows that each mass modifications require new dynamic analyses that could be cumbersome from a numerical point of view. This paper proposes a new combination rule to obtain in closed form the maximum responses of structures with mass modification by the response spectrum analysis (RSA) without solving any further eigenproblem. In particular, the proposed procedure, based on the application to the RSA of the interval perturbation method, leads to an extension of the classical complete quadratic combination rule to the analysis of structural systems with uncertain‐but‐bounded parameter. In particular, for structural systems with accidental eccentricity, the proposed approach allows to directly evaluate the worst condition for the structural elements with a single RSA. This very remarkable result is obtained by adopting a new modal combination rule, here called interval complete quadratic combination. Numerical results evidence a very good accuracy of the interval complete quadratic combination for single‐storey buildings as well as for the analyzed multistorey buildings. Copyright © 2014 John Wiley & Sons, Ltd.     

规则梁桥单墩-质点隔震体系地震时程响应半解析法

本文基于带集中参数边界条件的分布参数连续梁理论,推导规则隔震梁桥单墩-质点(SCM)地震时程响应的计算步骤.在控制方程边界条件引入等效基础弹簧和墩顶隔震层变形协调条件,解析地获得各阶实模态,用牛顿法搜索各阶频率.为了处理隔震层非比例阻尼产生的耦联效应,由能量法分配各阶实振型的隔震层附加阻尼比,实现体系的实模态近似解耦,应用振型叠加法求解体系的地震时程响应.最后应用该方法对一规则隔震梁桥SCM体系的地震响应进行分析,与有限元时程积分的结果进行比较,表明此方法的有效性.计算结果表明,采用墩顶隔震策略的单墩-质点体系能显著减小结构响应,具有良好的减震效果.     

Critical response of structures to multicomponent earthquake excitation

This paper aims to develop an improved understanding of the critical response of structures to multicomponent seismic motion characterized by three uncorrelated components that are defined along its principal axes: two horizontal and the vertical component. An explicit formula, convenient for code applications, has been derived to calculate the critical value of structural response to the two principal horizontal components acting along any incident angle with respect to the structural axes, and the vertical component of ground motion. The critical response is defined as the largest value of response for all possible incident angles. The ratio r_cr/r_srss between the critical value of response and the SRSS response—corresponding to the principal components of ground acceleration applied along the structure axes—is shown to depend on three dimensionless parameters: the spectrum intensity ratio γ between the two principal components of horizontal ground motion characterized by design spectra A(T_n) and γA(T_n); the correlation coefficient α of responses r_x and r_y due to design spectrum A(T_n) applied in the x‐ and y‐directions, respectively; and β = r_y/r_x. It is demonstrated that the ratio r_cr/r_srss is bounded by 1 and . Thus the largest value of the ratio is , 1.26, 1.13 and 1.08 for γ = 0, 0.5, 0.75 and 0.85, respectively. This implies that the critical response never exceeds times the result of the SRSS analysis, and this ratio is about 1.13 for typical values of γ, say 0.75. The correlation coefficient α depends on the structural properties but is always bounded between −1 and 1. For a fixed value of γ, the ratio r_cr/r_srss is largest if β = 1 and α = ±1. The parametric variations presented for one‐storey buildings indicate that this condition can be satisfied by axial forces in columns of symmetric‐plan buildings or can be approximated by lateral displacements in resisting elements of unsymmetrical‐plan buildings. Copyright © 2000 John Wiley & Sons, Ltd.     

非线性粘滞阻尼器消能结构设计方法探讨

在建立非线形粘滞阻尼器消能结构性能曲线的基础上，建议了依据减震性能目标确定阻尼器参数的概略设计方法。提出了多自由度非线性粘滞阻尼器消能结构的等效阻尼比计算公式。在此基础上建议了适用于多自由度非线性粘滞阻尼器消能结构地震反应预测的模态叠加法，方法与时程分析结果对比吻合良好。为使各层阻尼器参数更好地满足减震性能要求，提出了将概略设计得到的层阻尼器参数依据减振性能目标进行调整的方法。     

多层复形法在结构优化中的程序设计

对结构优化设计中使用得较多的复形法进行了扼要介绍,比较了普通复形法与多层复形法的优劣,并设计了两种方法的具体算法,算例证明,多层菜法减少了调优搜索迭代次数,增加了程序的稳定性。     

基于EMD方法与RBF神经网络的结构损伤检测

针对结构损伤检测中损伤的识别、定位以及程度的标定这三个独立并按一定先后顺序进行的检测过程,提出了一种能将以上三者同时进行的联合检测方法。该方法首先利用经验模态分解(EMD)方法将三层钢筋混凝土剪切型结构在各种损伤工况下的顶层地震作用加速度响应分解为若干固有模态函数(IMF)分量,然后以此IMF分量和未经EMD分解的原始加速度响应数据来构造损伤标识量,作为特征参数依次输入到径向基函数神经网络(RBFNN)中进行损伤检测。给出了应用此方法的具体步骤,通过仿真实验证明了利用该方法进行结构损伤一次检测的可行性和有效性,结果表明,由加速度响应经EMD分解而得到的IMF分量输入到RBFNN中能够更为精确地一次检测出结构所有损伤信息,并且RBFNN在结构损伤损度大时具有更好的检测效果。     

非经典振型分解法求混凝土房屋及其上钢塔的地震响应

钢结构与混凝土结构阻尼比不同,混凝土房屋与其顶上钢塔组成了非比例阻尼结构系统。本文用非经典振型分解法求解该类结构系统的线弹性地震响应,发现只用前几阶振型响应迭加的结果即可逼近直接积分法的精确度。     

A hybrid analysis method for linear dynamic soil-structure interaction in time and frequency domain

IntroductionThe analysis of dynamic soil-structure interaction for important engineering project is still based on linear model (including equivalent linear model) with complex damping, and traditional frequency domain method (Lysmer, et al, 1975, 1981; DING, et al, 1999). Namely, first calculating frequency domain solution by Fourier transform, and then calculating time domain solution by Fourier inverse transform. The motion equation of a system in frequency domain is usually written as (…     

Evaluation of combination rules for maximum response calculation in multicomponent seismic analysis

The existing rules for combining peak response to individual components of ground motion are evaluated. The response values r_e to two horizontal components of ground motion estimated by four multicomponent combination rules—SRSS‐, 30%‐, 40%‐ and simplified‐SRSS‐rules—are compared with the critical response, r_cr, obtained by the CQC3‐rule, which takes into account the direction of the principal ground components with respect to the structural axes and provides the largest response over all possible seismic incident angles. The following results are obtained in the first part of the paper and are valid for any elastic structure and any earthquake design response spectrum: For realistic values of the ratio γ of the design spectra for the two principal components of ground motion the SRSS‐rule estimate lies between 0.79r_cr and 1.00r_cr, the Simplified‐SRSS‐rule estimate lies between 1.00r_cr and 1.26r_cr, the 40%‐rule estimate lies between 0.99r_cr and 1.25r_cr, and the 30%‐rule estimate lies between 0.92r_cr and 1.16r_cr. None of the multicomponent combination rules account for the increase in response of systems if the vibration periods of the two modes that contribute most to the response to the x‐ and y‐components of ground motion are close to each other. Evaluated in the second part of the paper is the accuracy of the multicomponent combination rules in estimating the response of a range of one‐storey systems with (a) symmetrical plan and (b) unsymmetrical plan, and of two multistorey buildings. The SRSS‐rule underestimates the response by up to 16% and the other three rules overestimate it by up to 18%. Although these errors appear to be smaller than the many approximations inherent in structural design, they can be eliminated with very little additional computation by using an explicit formula for the critical response based on the CQC3 rule. Copyright © 2001 John Wiley & Sons, Ltd.     

消能减震结构设计的阻尼比研究

阻尼比是消能减震结构设计的重要参数,对消能减震结构设计具有决定性影响。消能减震结构设汁巾阻尼是时变参数,消能减震结构是非经典阻尼结构。采用复模态设计方法、强解耦振型分解法、基于变形能的等效阻尼法三种方法分别对不同情况的消能减震结构阻尼比进行研究,得到选择消能减震设计疗法和不同方法计算精度的规律,对消能减震结构设计具有参考价值。     

弹性能量半径演化谱及其在多自由度体系地震反应计算中的应用

目前用于结构抗震设计的反应谱仅能反映峰值反应,无法体现反应值随时间的变化。文中提出一种弹性能量半径演化谱,可反映线性单自由度体系弹性能量(即动能与弹性势能之和)随地震持时的变化,且其峰值近似等于结构峰值位移。文中给出了利用地震动演化功率谱得到该演化谱的方法并进一步发展了一种计算线性多自由度体系地震位移反应的新方法。通过两座框架结构的地震反应计算,将新方法与传统振型组合法及时程分析法的计算结果进行对比,发现对于振型稀疏结构,新方法计算结果与SRSS法接近;而对于振型密集结构,新方法计算结果较CQC法更精确,且避免了CQC法相关系数的复杂计算。     

变阻尼共轭梯度算法及其性能分析

为了提高反演的分辨率和计算效率,本文在传统阻尼共轭梯度法的基础上,提出了变阻尼共轭梯度算法.由于在最小二乘线性反演过程中,多数情况下都要计算偏导数矩阵,而偏导数矩阵列向量的长度大小决定了解向量在对应分量方向上前进的快慢,变阻尼共轭梯度算法的提出正是利用了偏导数矩阵的这一特点.从理论上讲,它要优于传统的固定阻尼共轭梯度法.最后通过计算实例证明了该算法计算精度高,稳定性好,收敛速度快.因此采用变阻尼共轭梯度算法进行地球物理反演是切实可行的.     

一种动静结合的框架结构损伤识别方法

为了改进对框架结构损伤的识别效果,在动态和静态损伤识别指标的基础之上,提出了将动态一阶应变差与静态单元相关系数相乘的动静相结合的损伤识别新指标。新指标具有动态法和静态法的优点,一定程度上对动态识别效果与静态识别效果进行叠加,较单独使用动态指标和静态指标更准确、更具优势。对一个4层框架结构的单处损伤和多处损伤进行了数值模拟,并分别使用动态、静态和动静结合的3种指标进行了损伤识别效果的比较,验证了新指标更具优越性。     

改进的基础隔震结构地震作用简化计算方法

在《建筑抗震设计规范》(GB50011-2001)关于隔震结构的简化计算方法中,水平向减震系数的表达式和定义有些不符,假定的隔震结构地震作用分布规律也与实际情况略有出入。本文基于水平向减震系数的定义和实际隔震结构的地震作用分布规律提出了一种改进的隔震结构水平向减震系数、隔震结构总地震作用、隔震结构上部地震作用分布的计算方法,并提出了总水平地震作用减震系数的新概念。本文提出的改进方法具有表达准确、物理意义明确的特点。将本文提出的改进算法计算结果与时程分析计算结果比较,结果显示,改进方法的计算结果与时程分析结果接近,且分布规律一致。     

用模式匹配算法研究层状各向异性倾斜

利用数值模式匹配技术,研究并建立层状各向异性倾斜地层中多分量感应测井响应的快速数值模拟算法.首先将位于井轴上的三个相互正交磁偶极子转化成关于极角θ的三个谐变分量的叠加,以便将三个正交磁偶极子电磁场的正演问题完全简化成三个谐变分量电磁场的轴对称定解问题,并给出电磁场各个谐变分量在井轴上满足的边界条件,保证电磁场在井轴附近仍然可解.然后利用数值模式匹配技术建立电磁场各个谐变分量的正演过程,得到层状各向异性地层中磁流源并矢Green函数的半解析表达式,给出计算层状各向异性倾斜地层中多分量感应测井响应的具体方法,最后通过数值计算结果证明该算法的有效性并考察几种不同情况下多分量感应测井响应特征.     

用模式匹配算法研究层状各向异性倾斜地层中多分量感应测井响应

利用数值模式匹配技术,研究并建立层状各向异性倾斜地层中多分量感应测井响应的快速数值模拟算法.首先将位于井轴上的三个相互正交磁偶极子转化成关于极角θ的三个谐变分量的叠加,以便将三个正交磁偶极子电磁场的正演问题完全简化成三个谐变分量电磁场的轴对称定解问题,并给出电磁场各个谐变分量在井轴上满足的边界条件,保证电磁场在井轴附近仍然可解.然后利用数值模式匹配技术建立电磁场各个谐变分量的正演过程,得到层状各向异性地层中磁流源并矢Green函数的半解析表达式,给出计算层状各向异性倾斜地层中多分量感应测井响应的具体方法,最后通过数值计算结果证明该算法的有效性并考察几种不同情况下多分量感应测井响应特征.     

昆明高(超高)层建筑环境振动特性实测与统计分析

对昆明16栋典型钢筋混凝土高层建筑物的振动特征(包括建筑物的固有频率、振型和阻尼比)进行观测与分析,对地震响应数值模拟研究,获取实测高层建筑物第一至第三振型及结构,计算第一至第二振型自振周期结果,采用数学线性回归方法,模拟得到昆明高(超高)层建筑结构实测第一至三振型和计算第一至第二振型周期公式,为类似建筑结构的设计提供经验和依据。