Micro-Tremor Induced Gravity and Seismic Noise Spectra in the Garhwal Himalaya and the Adjoining Regions

The characteristic site response spectra of soft sedimentary rocks in the Garhwal Himalaya and a few localities in the adjoining Ganga plain and Himachal Himalaya have been studied through short period passive seismic source experiment using ambient noise data. Along with this, stand-alone temporal gravity data in the Doon valley was also acquired. It has been observed that there exist two extreme frequency bands in the gravity and seismic response spectra of alluvial soft sediments in the Doon valley and the adjoining regions, when it subjected to micro-seismic and gravity-tidal oscillation. The concept of damped harmonic oscillator was used to study the fundamental long period modes in the density driven diffusive fluid flow in the valley alluvial pore spaces, and observed that the flow was continued from minutes to a few days. In this case, apart from the diurnal component, the observed fundamental modes are in the bands from 0.42 to 1.83 days. The characteristic frequencies of seismic response spectra for the fundamental modes of thick soft sediments were also studied using the spectral ratio (HVSR) method of Nakamura. In the Ganga basin, a moderate resonant frequency of 3 Hz is sufficient for thick soft sediment to cause relatively large vertical amplitude, which suggest possibility for sub-surface secondary seismic effects like liquefaction. However, the hard rock terrains in the lesser Himalaya, where only a veneer of soft sediment is present, show relatively high frequency values of 15 to 18 Hz even to produce an H/V amplitude ratio of 1 and 1.7 and hence could be considered as relatively stable.     

The application of HVSR method in detecting sediment thickness in karst collapse area of Pearl River Delta,China

The microtremor horizontal-to-vertical spectral ratio (HVSR, or H/V spectral ratio) method is an effective tool for detecting sediment thickness. Firstly, single-station microtremor measurements were taken beside 52 boreholes located in Pearl River Delta, China. Sediment thicknesses revealed by those boreholes range from 7.9 to 39.6 m. Then, those microtremor data were analyzed using HVSR method, and peak frequency of each site was extracted. According to those peak frequencies of HVSR and corresponding sediment thicknesses, the frequency-to-thickness fitting (f–Z) equation which is suitable for Pearl River Delta area was established. And this equation was compared with several fitting equations derived from different regions by other researchers. Finally, this fitting equation was applied in a collapse area in Guangzhou city to estimate site sediment thickness. Compared with data from five boreholes in this collapse area, the consistency between estimated sediment thickness and real value was relatively good. Karst sinkholes are generally located in regions where thickness of sediments is shallow. Therefore, the method described in this paper can provide support for delineating potential collapse areas.     

Soft soil mapping using Horizontal to Vertical Spectral Ratio (HVSR) for seismic hazard assessment of Chandigarh city in Himalayan foothills,north India

The populated and expanding city of Chandigarh is located in the foothills of Himalaya, near the potentially active Main Frontal Thrust (MFT). A hazard assessment for this city is consequently of major importance. Thick sediments underlies the city and that can potentially amplify the earthquake shaking and contribute to an earthquake disaster in the city. The present study applies the Horizontal to Vertical Spectral Ratio (HVSR) ambient noise methodology to estimate the resonance frequency of the soft sediments and to obtain a first order estimate of sediment thickness. The study indicates that the soil thickness range from 30 to 270 m and that the resonance frequencies vary from 0.236 to 1.479 Hz. A smooth correlation function between soil thickness and resonance frequency is found, indicating relatively homogeneous soil.     

Site amplification investigation in Dhaka, Bangladesh, using H/V ratio of microtremor

The degree of damage during earthquakes strongly depends on dynamic characteristics of buildings as well as amplification of seismic waves in soils. Among the other approaches, microtremor is, perhaps, the easiest and cheapest way to understand the dynamic characteristics of soil. Non-reference microtremor measurements have been carried out in 45 locations in and around the capital Dhaka city of Bangladesh. Subsoil investigations (Standard Penetration Test and Shear Wave Velocity) have also been executed in those locations. Soil model has been developed for those locations for site response analysis by means of the program SHAKE. Among those 45 locations, predominant frequency of microtremor observation varies from 0.48 to 3.65 Hz. Out of those 45, for 35 locations Transfer function obtained from the program SHAKE have higher frequency compared to microtremor H/V ratio and for one location it has lower predominant frequency. For six locations, frequencies obtained from two methods are identical. For three other locations, there are no similarities between predominant frequency obtained from microtremor and transfer function. The seismic Vulnerability Index (Kg) for 45 sites varies between 0.45 and 31.85. Ten sites have been identified as having moderate vulnerability of soil layers to deform.     

Seismic vulnerability assessment in the new urban area of Diriyah Governorate,Riyadh, Saudi Arabia

Nine seismic refraction profiles were conducted and processed to study the near-surface sediments in the new urban area of Diriyah. The 2D geoseismic models illustrate two layers: a surface layer of soft sediments and weathered to hard limestone bedrock. Moreover, microtremor measurements were performed at 38 sites for 40 min using three-component seismographs and processed to assess the peak spectral amplitude and the corresponding fundamental resonance frequency. The seismic vulnerability index at each measurement site was estimated. These results correlate well with the geotechnical borehole data. The north-western zone is highly vulnerable due to the great thickness of the soft sediments.     

Efficiency of horizontal-to-vertical spectral ratio (HVSR) in defining the fundamental frequency in Muscat Region,Sultanate of Oman: a comparative study

Muscat region is the most important political, economic, and densely populated region in the Sultanate of Oman. The proximity of Muscat region to the Oman Mountains and Makran subduction zones controls the earthquake hazard for Muscat. Evidences indicate the occurrence of a nearby historical earthquake with moderate magnitude M _S?=?5.5 in 1883. This event led to the damage of some villages near Nizwa City. The main objective of the current study is to compare the site characteristics of the region of interest in terms of the fundamental frequency using microtremors measurements with the numerical analysis results using one-dimensional (1-D) shear wave profiles. The microtremor measurements were performed at 99 sites distributed over the study region in order to calculate the horizontal-to-vertical spectral ratio (HVSR). The numerical modeling of horizontal shear (SH) waves in soil at the selected 99 sites are assessed by carrying out 1-D ground response analysis using the program SHAKE91. The required shear wave velocity profiles for the numerical modeling of SH-waves were derived using multichannel analysis of surface waves profiles. The amplification spectra have been evaluated for the soil column at each site location and the fundamental frequency obtained using SHAKE91 and HVSR are compared. Results were found to be compatible with the general surface geology of the region of interest and in most cases the HVSR is proved to be suitable for calculating the fundamental frequency in Muscat region.     

Equivalent-linear site response analysis on the site of the historical Trakošćan Castle,Croatia, using HVSR method

This paper presents a major extension of seismic vulnerability research project on the site of Trako??an Castle based on the initial horizontal-to-vertical-spectral-ratio (HVSR) results from Stanko et al. (2016). The estimated HVSR site frequencies and HV amplification at Trako??an Castle can only be used as an indication of the initial soil site frequency and amplification, so-called natural soil model, corresponding to the subsoil profile without the influence of an earthquake. The equivalent-linear (EQL) site response analysis has been carried out for different earthquake scenarios for a maximum input rock peak ground acceleration (PGA_ROCK) that corresponds to return periods of 95 (0.08 g), 475 (0.18 g) and 1000 years (0.31 g). The aim of the research is to evaluate structural seismic design responses and to determine type and degree of damage caused by local site effect, which is the result of an alluvial basin and topographic influences. The main objective of this research is the formation of local microseismic zones based on an EQL analysis: surface spectral acceleration and amplification maps at the predominant frequency. Based on the HVSR frequency response of the core structure of Trako??an Castle and the Tower itself (fundamental and higher frequency modes), maps of surface spectral acceleration and soil amplification at different frequencies (3, 5 and 10 Hz) are developed for different input PGA_ROCK levels (0.08, 0.18 and 0.31 g) to evaluate seismic response of the Castle. Observed amplifications are correlated with ground motion polarization and directionality of the ground motion from the alluvial basin to the hilltop. Shortening of predominant frequencies (lengthening of the period), particularly in the alluvial basin, has been observed with higher input PGA_ROCK in the EQL analysis. This effect is not manifested in the Trako??an hill, and predominant frequencies match HVSR frequencies. The use of certain geophysical survey methods at historical sites is a big problem, because terrain features (e.g. steep hills, mountains, ridges, slopes, cliffs) create lack of space and make it impossible to carry out geophysical investigation. Microtremor measurements at historical sites can overcome this limitation and provide local seismic response and vulnerability behaviour of historical monuments without destroying their authenticity. Also, computational modelling can greatly improve the results. The EQL site response analysis on the site of Trako??an Castle has confirmed and improved the results of seismic response and vulnerability based on HVSR method.     

福建沿海地区场地土对地脉动动力响应的研究

以福建省泉州市区和福州市区场地土的动力特性和地脉动频谱结构为研究对象,通过对这两个地区的地脉动信号的频谱分析获得频谱结构特征,由此来深入研究该地区岩土的动力特性及场地土层的地脉动动力响应。通过场地脉动的测试,利用快速傅立叶变换(FFT)方法对观测到的地脉动信号进行频谱分析。根据实际观测资料研究了地脉动频谱结构特征及场地土对地脉动的频率响应的特性。研究不同地基土层构造与地脉动的频率依赖以及频率选择作用。结果表明,地脉动的频谱特性与场地覆盖层厚度和地基土刚度的变化密切相关;覆盖层厚度是影响地脉动卓越周期的重要原因,其中软土层对地脉动的卓越周期有一定的放大作用。     

Characterization of site effects in Montreal,Canada

Recent destructive earthquakes have clearly shown that near-surface geological conditions play a major role in the level of ground shaking in urban areas. In Canada, Montreal is ranked second for seismic risk after Vancouver considering its population and regional seismic hazard. The city is largely built on recent unconsolidated marine and river deposits and most of its infrastructure is old and deteriorated. A seismic risk project that includes a combined methodology for site effects zoning in large cities, using microtremor measurements (H/V method) coupled with 1D numerical modelling (SHAKE91), has been initiated. The experimental approach gives good estimates of the fundamental frequency of soft deposits, while the numerical approach provides good estimates of the soil response in terms of amplification factor related to frequency. Main mechanical properties of soft soils were compiled from various data available, and a sample of input rock motions from real and synthetic earthquakes was used to compute soil response. The influence of marine clays on soil response is significant and is well correlated with thickness of these deposits. PGA amplification factors range from 2 to 4 at frequencies from 2 to 7 Hz, with some occasional larger values. The results demonstrate that the methodology used for our study is both fast and efficient to determine the influence of soft soils in urban environments. Such studies are essential for the effective deployment of seismic instrumentation, land-use planning and seismic mitigation.     

微动HVSR法在岩溶区探测地下河管道和溶洞的有效性研究

微动HVSR（Horizontal-to-Vertical Spectral Ratio）法是一种简单有效的被动源地震勘探方法,当测点下方介质存在明显的速度变化时,HVSR曲线会呈现相应的异常形态。为探索该方法在岩溶区探测地下河管道和溶洞的有效性,选择桂林毛村地下河流域内的大岩前村作为研究区,并在此开展野外试验。研究区发育有一条地下河管道,通过精准的洞穴测量,获得了此地下河管道的平面位置和洞高等信息。在研究区的地下河管道上方地面布设3条物探测线,均进行微动HVSR法测量,并用探地雷达法测量作对比。结果表明,两种物探方法的异常位置与测线下方地下河管道的实际平面位置基本一致,证明微动HVSR法可作为一种有效的地下河管道和溶洞探测方法。     

Liquefaction-induced settlement,site effects and damage in the vicinity of Yalova City during the 1999 Izmit earthquake,Turkey

Yalova City (Turkey) is in a tectonically active location that is particularly affected by the northern branch of the North Anatolian Fault Zone. Magnitudes 7.4 and 7.2 earthquakes in 1999 caused great destruction in Yalova. The heavy damage to buildings and other civil engineering structures was mainly due to liquefaction-induced settlement and site effects such as resonance and amplification. In the first phase of this study, the soil liquefaction potential index (PL) and the induced soil settlement were estimated. In the second phase, the effects on sites in Yalova soil were investigated using microtremor and earthquake data. The fundamental periods and amplification in soft soil were compared with microtremor data and strong ground motion records obtained by a local array of eight accelerograph stations deployed in Yalova. Thirty-seven ‘single site’ ambient noise measurements were taken in a dense grid of points covering the centre of the city. A comparison between fundamental periods obtained from strong ground motion records and from microtremor measurements showed similarities, in the 0.1–5 Hz range. Finally, soil liquefaction and amplification (or resonance) were divided into regions according to the extent of damage and the geotechnical/geophysical results.     

喜马拉雅西部雅鲁藏布江缝合带地壳尺度的构造叠置

陆陆碰撞过程是板块构造缺失的链条。印度板块与亚洲板块的碰撞造就了喜马拉雅造山带和青藏高原的主体。然而,人们对印度板块在大陆碰撞过程中的行为尚不了解。如大陆碰撞及其碰撞后的大陆俯冲是如何进行的、印度板块是俯冲在青藏高原之下还是回转至板块上部(喜马拉雅造山带内)以及两者比例如何,这些仍是亟待解决的问题。印度板块低角度沿喜马拉雅主逆冲断裂(MHT)俯冲在低喜马拉雅和高喜马拉雅之下已经被反射地震图像很好地揭示。然而,关于MHT如何向北延伸,前人的研究仅获得了分辨率较低的接收函数图像。因而,MHT和雅鲁藏布江缝合带之间印度板块的俯冲行为仍是一个谜。喜马拉雅造山楔增生机制,也就是印度地壳前缘的变形机制,反映出物质被临界锥形逆冲断层作用转移到板块上部,或是以韧性管道流的样式向南溢出。在本次研究中,我们给出在喜马拉雅造山带西部地区横过雅鲁藏布江缝合带的沿东经81.5°展布的高分辨率深地震反射剖面,精细揭示了地壳尺度结构构造。剖面显示,MHT以大约20°的倾斜角度延伸至大约60 km深度,接近埋深为70~75 km的Moho面。越过雅鲁藏布江缝合带运移到北面的印度地壳厚度已经不足15 km。深地震反射剖面还显示中地壳逆冲构造反射发育。我们认为,伴随着印度板块俯冲,地壳尺度的多重构造叠置作用使物质自MHT下部的板块向其上部板块转移,这一过程使印度地壳厚度减薄了,同时加厚了喜马拉雅地壳。     

Site amplification at Avcılar, Istanbul

Avcılar is the suburb of Istanbul that was most heavily damaged during the August 17, 1999 M_w 7.4 Izmit earthquake. Strong ground motion caused fatalities and damage in Avcılar despite being 90 km from the epicenter. We deployed five portable seismograph stations equipped with Reftek 24-bit recorders and L4C-3D seismometers for 2 months, in order to understand why the local site response was different from elsewhere in Istanbul. A reference station was placed on a hard rock site, and the remaining four stations were placed on other geological units, in areas that had experienced varying levels of damage. We calculated frequency-dependent ground amplification curves by taking the ratios of the spectra at soft and hard rock sites. We obtained similar site response curves for most earthquakes at each site in the frequency range of 0.3–1.6 Hz, and observed no significant site amplification beyond 2.0 Hz at any site. The overall characteristics of the recorded S-waveforms and our modeling of the calculated site amplification curves are consistent with amplification as a result of trapping of seismic energy within a 100–150 m thick, low-velocity subsurface layer. We also review the applicability of microtremor measurements to estimate local site effects at Avcılar. For these data, we used ratios of spectra of horizontal to vertical components to obtain each site response. These results are compared with standard spectral ratios. These microtremor measurements provide consistent estimates of the amplification at most sites at the higher end of the frequency band, namely above 1 Hz. The results from both methods indeed agree well in this part of the frequency band. However, the microtremor method fails to detect amplification at lower frequencies, namely <1.0 Hz.     

Morphotectonic evolution of Parduni Basin: An intradun piggyback basin in western Doon valley,NW Outer Himalaya

During the course of mapping of active faults in the northwestern Outer Himalaya (using CORONA photographs, multispectral satellite data of Indian Remote Sensing satellite (IRS) and aerial photographs) we have identified an isolated basin of Quaternary and Holocene sediments resting unconformably on Siwaliks, around Parduni, in the northwestern Dehra Dun (Doon) valley. The region around Parduni is tectonically very complex and is traversed by active thrust faults to its north and south and strike slip faults to its east and west. The uplift and southward shift along the strike slip faults on both sides and the Markanda thrust edging to its south, the Parduni has developed as an intradun basin and now remains isolated from the main Doon valley. Based on the OSL age data widespread deposition of Quaternary alluvial fan sediments, the dun gravels, is inferred to have initiated around 34 ka BP in the western part of the Doon valley, while the sedimentation in the Parduni Basin started only around 27 ka BP, which more or less ceased around 20 ka. The southward movement of the Parduni Basin as a piggyback basin is ongoing with recent alluvial deposits covering the dun gravels tectonically overlain by the Siwalik sandstone and mudstones in the hanging wall of the Markanda thrust. The present communication discusses the development and evolution of the Parduni Basin vis-à-vis the configuration of the Doon valley in the northwestern Outer Himalaya and the prevalence of tectonics expressed or demonstrated in the active Himalayan Front.     

Characterizing site response in the Attock Basin,Pakistan, using microtremor measurement analysis

The Attock Basin is situated close to the northwest of Pakistan. Recent seismic event of October 2015 (7.5M_w) near the Pakistan Afghanistan border has proved that the area of interest is seismically active and triggered a series of aftershocks of magnitude even greater than 6.5M_w. This seismic activity has posed danger to the future of the people and infrastructure especially to the northwestern part of the country. Therefore, site response analysis is essential for estimating local site conditions in response to seismic events. Ambient noise recordings were made at 50 sites within urban and semi-urban settlements in the Attock Basin to analyze the site response of the small but densely populated basin. At each of these sites, the fundamental frequency of the soft sediments (f ₀), the amplitude (A ₀) of corresponding H/V spectral ratios, the thickness of soft sediment (H) lying over competent lithology, and the soil vulnerability index (K _g) were studied. Results were correlated with sparsely available borehole data to enhance the credibility of the study conducted for microzonation and predicting the site response to earthquake seismicity in the Attock Basin. The soil vulnerability index was found to range from moderate to high. Results clearly showed that the study area exhibits low to moderate fundamental frequency with greater soft sediment thicknesses distributed throughout the study area. Moreover, higher impedance contrasts were found at most of the sites within the central part of the Attock Basin, thus reflecting a moderate to high susceptibility of damage in those regions in response to seismic events.     

Seismic microzonation of Bangalore,India

In the present study, an attempt has been made to evaluate the seismic hazard considering local site effects by carrying out detailed geotechnical and geophysical site characterization in Bangalore, India to develop microzonation maps. An area of 220 km², encompassing Bangalore Mahanagara Palike (BMP) has been chosen as the study area. Seismic hazard analysis and microzonation of Bangalore are addressed in three parts: in the first part, estimation of seismic hazard is done using seismotectonic and geological information. Second part deals with site characterization using geotechnical and shallow geophysical techniques. In the last part, local site effects are assessed by carrying out one-dimensional (1-D) ground response analysis (using the program SHAKE2000) using both standard penetration test (SPT) data and shear wave velocity data from multichannel analysis of surface wave (MASW) survey. Further, field experiments using microtremor studies have also been carried out for evaluation of predominant frequency of the soil columns. The same has been assessed using 1-D ground response analysis and compared with microtremor results. Further, the Seed and Idriss simplified approach has been adopted to evaluate the soil liquefaction susceptibility and liquefaction resistance assessment. Microzonation maps have been prepared with a scale of 1:20,000. The detailed methodology, along with experimental details, collated data, results and maps are presented in this paper.     

Dangerous ice phenomena on the lowland rivers of European Russia

The site amplification functions at 48 sites of NCR have been estimated in this study using the waveforms of locally recorded 23 earthquakes. Due to the absence of a suitable reference site in the region, the widely used horizontal-to-vertical spectral ratio (HVSR) technique has been used for this purpose. The maps showing the spatial distribution of predominant frequencies and the site amplifications at different frequencies corresponding to the natural frequencies of the different-storey buildings have been presented. The predominant frequencies in general are found to be in the range 2.5–7.5 Hz with an average of 4.4 Hz for the region having older alluvium sediments and in the range 1.1–6.4 Hz with an average of 3.3 Hz for the region with the younger alluvium deposits. The average value of the site amplifications for the frequency band 3.0–10.0 Hz is in the range 2.0–5.3 for the sites with significant soil cover, while the spectral amplification corresponding to the predominant frequency varies from 2.5 to 7.5 at most of the sites. The spectral amplification level lies in the range 2.0–3.0 for the sites with less or no sediment cover. The spectral amplification levels presented for the different-storey buildings may be used for the mitigation of seismic hazard in the region. The estimated site amplification functions may be used in the simulation of the site-specific strong ground motions and therefore useful for the evaluation of seismic hazard of a region.     

微动信号的数据处理与岩土频谱特性分析

频谱是微动信号的一个重要动力学参数,微动信号的频谱特性与场地覆盖层厚度和地基土刚度的变化密切相关,既可反映岩土层的类型特征,又能反映工程场地的动力特性。详细探讨了目前较为常用的利用微动信号进行场地动力特性分析的方法,并对这些方法进行了研究和比较。简要介绍了功率谱估计方法,同时,通过实例分析了微动信号的变化规律和场地微动信号的频率响应特性。     

Mapping sediment thickness of Islamabad city using empirical relationships: Implications for seismic hazard assessment

Soft sediments make an important component of the subsurface lithology, especially in areas underlain by river/stream basins. Occupying a position directly above the bedrock up to the land surface, these soft sediments can range in thickness from few centimeters to hundreds of meters. They carry a special nuisance in seismic hazards, as they serve as a source of seismic amplification that may enhance the seismic shaking of many folds. Determination of the thickness of the soft sediments is therefore crucial in seismic hazard analysis. A number of studies in recent years have demonstrated that frequency and amplitude spectrum obtained from the noise measurements during the recording of natural seismicity can be used to obtain thickness of soft sediments covering the bedrock. Nakamura (1989) presented a technique to determine such spectrum using ratio of horizontal to vertical components of the Rayleigh waves. The present study is based on an extensive set of microtremor measurements carried out in the Islamabad city, Pakistan. Fundamental frequencies were obtained from weak motion sensors and Tromino Engy Plus instruments to show that the correlation is clearly valid for a wide range of sediment thickness. A simple formula was derived for the investigated area to determine directly the thickness of sediments from the main peaks in the H/V spectrum for seismometer and Tromino data separately. A comparison is made between sediment thicknesses derived from empirical relations developed in this study with those given in literature to demonstrate a positive correlation. The correlation of instrumental resonant frequencies with calculated resonant frequencies (theoretical) suggests that the relation derived from the noise measurements mostly depends on the velocity depth function of the shear wave. The fundamental frequency of the main peak of spectral ratio of H/V using the both instruments correlates well with the thickness of sediments at the site obtained from the borehole data. It is found out that there is a wide variation in soft-sediment thickness in the Islamabad area, but as a general rule, soft sediments are thicker adjacent to stream courses compared to the areas intervening the streams. The distribution of sediments in the studied area is illustrated by means of cross sections constructed from results of the microtremor analyses and available borehole data, which provides a visual distribution of the soft sediments underlying the Islamabad city.     

Evaluating the effects of ground motion parameters on response spectra in Uttarakhand Himalayas,India

Uttarakhand, a state of India, is located in seismically active Himalayan region and in the proximity of plate boundaries. The effects of important ground motion parameters like magnitude, distance, and local geology and site conditions on acceleration response spectra are examined in Uttarakhand Himalayas in this work. A total of 447 strong ground motion histories (horizontal and vertical) from 42 earthquakes were selected. The results show that the shape of the acceleration response spectra is influenced by the local site conditions and regional geology. The studies are carried out for two categories of sites, i.e., rock sites and soft soil sites. The maximum average horizontal spectral amplification for rock sites is 2.7 at 0.1 s, while for soft soil sites, it is found to be 3.2 at 0.2 s. In the same way, the maximum average vertical spectral amplification for rock is found to be 2.7 at 0.1 s, while for soft soil, it is found to be 2.95 at 0.1 s. The average spectral amplification in vertical component also shifts from low period (rock) to high period (soft soil). The level of spectra increases with decrease in distance for rock sites as well as soft soil sites. When comparing different magnitude earthquakes in different geological conditions, the response spectra are found to follow each other up to 0.04 s, while for period greater than 0.04 s, the spectra of higher magnitude earthquake is observed on the higher side. For soft soil sites, spectra from different magnitude earthquakes are observed to follow each other up to 0.1 s, beyond which they get separated.