利用Rayleigh波反演浅土层的剪切波速度结构

根据均匀半空间Rayleigh波相速度与介质剪切波速度之间的关系,对某一频率面波的影响深度内各层介质进行"均匀"化,使其等效于均匀半空间．并利用模型进行正演,以确定在这种均匀化的前提下,面波勘探深度与波长的关系．应用相匹配滤波技术从实测面波信号中分离出基阶Rayleigh波信号,对它进行多重滤波和叠加处理,精确地计算出5．0-30．0Hz之间的基阶面波相、群速度频散．使用"均匀"化的方法,从相速度频散曲线中获得反演的初始模型,利用群速度频散反演得到35m以上各土层的剪切波速度结构．结果表明,反演结果与钻孔资料较为吻合     

煤层厚度变化时地震槽波理论频散曲线计算方法及频散特征分析

槽波地震勘探利用槽波的频散特性反演煤层的结构特征,故理论频散曲线的计算是一个重要方面.使用水平层状模型假设下的面波频散曲线计算方法能够计算煤层厚度恒定模型地震槽波频散曲线;但当煤层厚度变化时该方法不再适用.基于前人水平层状均匀介质模型的面波理论频散曲线计算方法,对于含煤三层模型,本文发展了煤层厚度变化情况下的地震槽波理论频散曲线计算方法,并使用该方法计算分析了不同厚度函数模型的频散曲线形态特征.研究表明：与稳定厚度煤层相比,煤层厚度变化使得地震槽波群速度成为与频率及传播射线在水平面投影路径相关的二元函数;射线路径上煤层厚度的变化使得频散曲线在群速度方向上压缩,群速度变化范围变小,且使处于最小值位置的埃里相群速度增大;而煤层厚度的线性变化模型频散曲线只与射线首、尾处的煤层厚度有关,与煤层厚度恒定模型相比,曲线形态不发生改变;煤层厚度呈非线性变化时,频散曲线形态上可能发生改变.     

瑞利波勘探中"之"字形频散曲线研究

研究了弹性层状半空间中导波的多模性问题,说明了关于瑞利波勘探中"之"字形频散曲线的形成机理.证明由单个的导波模式不可能得到"之"字形频散曲线,并从能量的角度出发,研究了各模式的实际强度与地层参数的关系,克服了从相速度的角度解释"之"字形频散曲线的困难.还深入研究了地表下低速层介质的位置、厚度及其他参数对"之"字形频散曲线的相互影响.与实际资料进行了对比分析,理论结果和实际情况基本相符.     

面波频散曲线快速追踪算法

层状地球模型面波频散理论传播矩阵法采用传统的Knopff's root-bracketing算法求频散函数的根即相速度,并广泛应用至今。本文提出了一个自动追踪求根算法,使频散曲线的计算变得更为有效,方便和快速。     

HTI煤层介质槽波波场与频散特征初步研究

煤层内裂隙较为发育,具有明显的各向异性.目前槽波理论研究以各向同性介质为主,对HTI介质中槽波及其频散性质研究很少.本文以弱各向异性、含垂直裂隙HTI煤层介质为研究对象,研究了HTI煤层介质中的三维槽波波场,采用交错网格高阶有限差分法模拟槽波,推导了三层水平层状HTI煤层介质的Love型槽波理论频散公式和振幅深度分布,分析了HTI各弹性参数对频散曲线的影响.HTI介质和各向同性介质基阶Love槽波频散曲线差异较小,高阶较大;煤厚主要影响Airy相频率,而Airy相速度不变;煤层vs对Airy相速度影响很大;煤层γ对基阶Love槽波影响很小,高阶稍大.各波偏振方向不再与波的传播方向平行或垂直,而是呈一定夹角.利用基阶Love槽波频散曲线推测裂隙发育较为困难,可利用高阶频散曲线.     

利用多重滤波方法提取面波频散曲线

多重滤波方法已被证明在分析面波的频散特性时是一种有效而快速的方法。本文用单个台站的单次地震事件记录,应用MFT(Multiple Filter Technique)方法提取了内华达地区的面波频散曲线并分析了其特征,认为其具有大陆基振型瑞利波频散曲线的典型特征。还利用广义反透射系数法快速计算了瑞利面波频散曲线,尤其是基阶瑞利波相速度及群速度频散曲线;并且在由振型叠加方法合成的理论地震图的基础上,通过比较理论频散曲线和MFT方法得到的频散曲线,研究了多重滤波的可靠性。     

利用地脉动台阵观测推算Love波频散曲线

土层剪切波速结构是工程场地条件的重要的基本参数，许多研究者关注利用从地脉动台阵中推得的Rayleigh波或Love波的相速度频散曲线反演实际工程场地剪切波速度结构。探讨从地脉动台阵观测的记录中提取Love波相速度的频散曲线的方法，从厦门某工程场地的地脉动台阵观测三分量记录中提取了Love波相速度的频散曲线，将提取的结果与根据实际场地资料构成的水平成层介质模型计算的Love波相速度的频散曲线进行了对比，为下一步的反演奠定了基础。     

基于面波频散曲线聚类分析的近地表横波速度反演

获取准确的近地表横波速度对复杂地表条件下弹性波地震数据处理和成像非常重要.在浅层面波工程勘探中通过反演提取的频散曲线可以获得近地表横波速度结构.在多道面波频散曲线分析中,频散关系拾取的精度直接影响速度反演结果的可靠性.本文在多道面波叠加及自动拾取频散曲线基础上,提出了基于面波频散曲线聚类分析的近地表横波速度反演方法.该方法充分考虑了低信噪比条件下面波频散曲线的不确定性,通过在频散曲线拾取中引入曼哈顿距离K-Means聚类算法提高频散曲线拾取的准确性.采用多道多窗口叠加技术提高了面波反演对横向速度变化的适应性,通过聚类算法和多窗口叠加提高反演的可靠性,聚类算法获得较准确的频散曲线更利于后续横波速度反演过程.模拟数据算例对比表明本文提出的方法比常规算法效果更好,精度更高.将提出的方法应用于工程勘探和油气勘探的面波数据反演中,结果也验证了该方法的有效性.     

横向非均匀介质多道瑞雷波频散曲线正演

作为近地表横波速度结构成像的主要手段之一,面波多道分析法的正问题研究对现场观测系统设计及后续反演计算具有重要意义.目前面波频散曲线的正演主要分为两类:一是对水平层状介质中面波的本征值问题进行求解,该类方法计算效率高但较难考虑地下介质在横向上的不均匀性;二是基于波动方程的全波场模拟,该类方法在理论上可考虑任意复杂的地质模型但计算成本相对较高.本文基于振幅归一化加权的聚束分析,提出了一种适用于横向非均匀介质模型的多道瑞雷波频散曲线正演方法.首先,基于聚束分析的计算公式推导得到了经振幅归一化加权后输出功率谱中相速度与局部相速度之间的关系,然后通过黄金分割极值搜索算法计算得到了多道瑞雷波数据的理论频散曲线.数值分析结果表明,该算法能够快速地实现横向非均匀介质中多道瑞雷波频散曲线的正演计算,所求取的频散曲线与采用二维弹性波时间域有限差分模拟分析得到的结果误差较小,这在一定程度上说明了该计算方法的可靠性,从而可为面波多道分析法中的观测系统快速优化设计以及横向非均匀介质中频散曲线的反演解释提供理论支撑.     

井孔压力与地层应力集中诱导的偶极弯曲波的分裂

利用在大形变基础上叠加小扰动的非线性波动理论——声弹性理论，数值考察了井外均匀各向同性固体介质同时受井孔静压力和井外单轴水平压力作用时，Stoneley波和两种偏振的偶极弯曲波的相速度频散曲线，并研究了计算中用到的灵敏系数随频率的变化. 数值结果表明，模式波相速度频散曲线的变化主要受灵敏系数中对应的3个三阶弹性常数的项控制；由井孔周围应力集中引起的沿单轴压力方向和垂直于该方向偏振的弯曲波发生分裂，同时随频率的增大，两条频散曲线产生交叉；井孔静压力的作用使两条频散曲线交叉点的位置发生变化，交叉点相速度值随井孔压力的增加而增大，但对应的频率值不变.     

Dispersion function of Rayleigh waves in porous layered half-space system

Rayleigh wave exploration is based on an elastic layered half-space model. If practical formations contain porous layers, these layers need to be simplified as an elastic medium. We studied the effects of this simplification on the results of Rayleigh wave exploration. Using a half-space model with coexisting porous and elastic layers, we derived the dispersion functions of Rayleigh waves in a porous layered half-space system with porous layers at different depths, and the problem of transferring variables to matrices of different orders is solved. To solve the significant digit overflow in the multiplication of transfer matrices, we propose a simple, effective method. Results suggest that dispersion curves differ in a lowfrequency region when a porous layer is at the surface; otherwise, the difference is small.     

Analytical partial derivatives of the phase- and group velocities for Rayleigh waves propagating in a layer on a half-space

The dispersion relation for Rayleigh waves in a layer on a half-space is modified by introducing the quadratic wave number instead of the phase velocity. The implicit function theorem is then used to derive analytical formulae for the group velocity and for the phase- and group velocity partial derivatives with respect to the parameters of the medium. As two examples, the method is applied to the interpretation of dispersion curves for short-period Rayleigh waves observed in a sedimentary basin of the West Carpathians, and in the Moravo-Silesian region, Czech Republic.     

黏弹性介质瑞雷波有限差分模拟与特性分析

本文通过数值模拟研究了介质黏弹性对瑞雷波传播的影响.模拟采用结合了交错Adams-Bashforth时间积分法、应力镜像法和多轴完美匹配层的标准交错网格高阶有限差分方案.通过模拟结果和理论结果对比,测试了方法的精度,验证了结果的正确性.在均匀半空间模型中,分别从波场快照、波形曲线及频散能量图三个角度,对黏弹性介质瑞雷波衰减和频散特性进行了详细分析.两层速度递增模型被用于进一步分析瑞雷波在黏弹性层状介质中的特性.结果表明：由于介质的黏弹性,瑞雷波振幅发生衰减,高频成分比低频成分衰减更剧烈,衰减程度随偏移距增大而增强;瑞雷波相速度发生频散,且随频率增大而增大,频散能量的分辨率有所降低;黏弹性波动方程中的参考频率,不会影响瑞雷波振幅衰减和相速度频散的程度,但决定了黏弹性和弹性介质瑞雷波相速度相等的频率位置.本研究有助于人们更好地理解地球介质中瑞雷波的行为,并为瑞雷波勘探的应用和研究提供了科学和有价值的参考.     

Surface Wave Group Velocity Tomography Imaging from Ambient Noise for Fujian Province and Its Adjacent Areas

Two-month continuous waveforms of 108 broadband seismic stations in Fujian Province and its adjacent areas are used to compute noise cross-correlation function (NCF). The signal quality of NCF is improved via the application of time-frequency phase weighted stacking. The Rayleigh and Love waves group velocities between 1s-20s are measured on the symmetrical component of the NCF with the multiple filter method. More than 5,000 Rayleigh wave dispersion curves and about 4,000 Love wave dispersion curves are obtained and used to invert for group velocity maps. This data set provides about 50km resolution that is demonstrated with checkerboard tests. Considering the off great circle effect in inhomogeneous medium, the ray path is traced based on the travel time field computed with a finite difference method. The inverted group velocity maps show good correlation with the geological features in the upper and middle crust. The Fuzhou basin and Zhangzhou basin showed low velocity on the short period group velocity maps. On the long period group velocity maps, the low velocity anomaly in the high heat flow region near Zhangzhou and clear velocity contrast across the Zhenghe-Dapu faults, which suggests that the Zhenghe-Dapu fault might be a deep fault.     

Dispersion splitting of Rayleigh waves in layered azimuthally anisotropic media

Rayleigh wave dispersion can be induced in an anisotropic medium or a layered isotropic medium. For a layered azimuthally anisotropic structure, traditional wave equation of layered structure can be modified to describe the dispersion behavior of Rayleigh waves. Numerical stimulation results show that for layered azimuthal anisotropy both the dispersion velocities and anisotropic parameters depend principally on anisotropic S-wave velocities. The splitting S-wave velocities may produce dispersion splitting of Rayleigh waves. Such dispersion splitting appears noticeable at azimuthal angle 45°. This feature was confirmed by the measured results of a field test. The fundamental mode splits into two branches at azimuthal angle 45° to the symmetry axis for some frequencies, and along the same direction the difference of splitting-phase velocities of the fundamental model reaches the maximum. Dispersion splitting of Rayleigh waves was firstly displayed for anisotropy study in dispersion image by means of multichannel analysis of surface waves, the image of which provides a new window for studying the anisotropic property of media.     

Apparent phase velocities and fundamental-mode phase velocities of Rayleigh waves

Rayleigh wave dispersion data usually appear in the form of multimodal spectra for a layered model structure. The number of dispersion modal curves depends on the number of layers in the model. The measured dispersion velocities from the frequency–wavenumber (F–K) space, however, may not represent the true phase velocities of the fundamental-mode dispersion curve, but apparent phase velocities. The present study discusses how multimode curves are generated in the multichannel analysis of surface waves (MASW) method and the cause of the apparent velocity produced by the F–K method. Results from a field trial demonstrate that apparent phase velocities fail to reveal thin layers with low velocities. A better agreement of the inverted model with the geotechnical record is obtained by using the data points extracted from the fundamental-mode curve of the MASW spectral image.     

Dispersion Energy Analysis of Rayleigh and Love Waves in the Presence of Low-Velocity Layers in Near-Surface Seismic Surveys

High-frequency surface-wave analysis methods have been effectively and widely used to determine near-surface shear (S) wave velocity. To image the dispersion energy and identify different dispersive modes of surface waves accurately is one of key steps of using surface-wave methods. We analyzed the dispersion energy characteristics of Rayleigh and Love waves in near-surface layered models based on numerical simulations. It has been found that if there is a low-velocity layer (LVL) in the half-space, the dispersion energy of Rayleigh or Love waves is discontinuous and ‘‘jumping’’ appears from the fundamental mode to higher modes on dispersive images. We introduce the guided waves generated in an LVL (LVL-guided waves, a trapped wave mode) to clarify the complexity of the dispersion energy. We confirm the LVL-guided waves by analyzing the snapshots of SH and P–SV wavefield and comparing the dispersive energy with theoretical values of phase velocities. Results demonstrate that LVL-guided waves possess energy on dispersive images, which can interfere with the normal dispersion energy of Rayleigh or Love waves. Each mode of LVL-guided waves having lack of energy at the free surface in some high frequency range causes the discontinuity of dispersive energy on dispersive images, which is because shorter wavelengths (generally with lower phase velocities and higher frequencies) of LVL-guided waves cannot penetrate to the free surface. If the S wave velocity of the LVL is higher than that of the surface layer, the energy of LVL-guided waves only contaminates higher mode energy of surface waves and there is no interlacement with the fundamental mode of surface waves, while if the S wave velocity of the LVL is lower than that of the surface layer, the energy of LVL-guided waves may interlace with the fundamental mode of surface waves. Both of the interlacements with the fundamental mode or higher mode energy may cause misidentification for the dispersion curves of surface waves.     

水平层状介质中基阶瑞利面波椭圆极化特征数值分析与研究

近年来的工程实践表明,以速度频散特性为理论基础的传统瑞利面波法的实际应用存在场地限制的瓶颈问题.为克服该困难,本文从面波的基础理论着手,在前人建立的水平层状介质中瑞利面波速度频散方程的基础上,推导了水平层状介质中瑞利面波质点位移的解析解公式.以工程中常见的几种典型的水平层状地层模型为例,结合地脉动单点谱比法(HVSR,Horizontal to Vertical Spectral Ratio),对基阶瑞利面波的椭圆极化特征进行了数值模拟研究.研究结果表明:与瑞利面波的速度频散特性类似,其椭圆极化同样具有频散特性,且椭圆极化时的质点位移水平分量与垂直分量的频谱比与地层泊松比结构有关.瑞利面波的这种椭圆极化特性展示了利用单点瑞利面波的多分量评价地层泊松比结构的理论可行性.