Geology,mineralogy and fluid inclusion data of the Kizilcaören fluorite–barite–REE deposit,Eskisehir, Turkey

The Kizilcaören fluorite–barite–Rare Earth Element (REE) deposit occurs as epithermal veins and breccia fillings in altered Triassic metasandstones and Oligocene–Miocene pyroclastics adjacent to alkaline porphyritic trachyte and phonolite. This deposit is the only commercial source of REE and thorium in Turkey. Most of the fluorite–barite–REE mineralisation at Kizilcaören has been formed by hydrothermal solutions, which are thought to be genetically associated with alkaline volcanism. The occurrence of the ore minerals in vuggy cavities and veins of massive and vuggy silica indicate that the ore stage postdates hydrothermal alteration. The deposit contains evidence of at least three periods of hypogene mineralisation separated by two periods of faulting. The mineral assemblage includes fluorite, barite, quartz, calcite, bastnäsite, phlogopite, pyrolusite and hematite as well as minor amounts of plagioclase feldspar, pyrite, psilomelane, braunite, monazite, fluocerite, brockite, goethite, and rutile. Fluid inclusion microthermometry indicates that the barite formed from low salinity (0.4–9.2 equiv. wt% NaCl) fluids at low temperatures, between 105 and 230 °C, but fluorite formed from slightly higher salinity (<12.4 equiv. wt% NaCl) fluids at low and moderate temperatures, between 135–354 °C. The depositional temperature of bastnäsite is between 143–286 °C. The local coexistence of liquid- and vapour-rich inclusions suggests boiling conditions. Many relatively low-salinity (<10.0 equiv. wt% NaCl), low and moderate temperature (200–300 °C) inclusions might be the result of episodic mixing of deep-saline brines with low-salinity meteoric fluids. The narrow range of δ³⁴S (pyrite and barite) values (2.89–6.92‰ CDT)suggests that the sulphur source of the hydrothermal fluids are the same and compatible with a volcanogenic sulphate field derived from a magmatic sulphur source.     

Mineralogical and fluid characteristics of the fluorite-rich Monakoff and E1 Cu–Au deposits,Cloncurry region,Queensland, Australia: Implications for regional F–Ba-rich IOCG mineralisation

The Monakoff iron oxide–Cu–Au (IOCG) deposit, located to the north east of Cloncurry within the Eastern Succession of the Mount Isa Inlier, Queensland, Australia, is characterised by high concentrations of F and Ba, with a host of other enriched elements including Co, Ag, Mn, REE, U, Pb, Zn and Sr. This gives the deposit a characteristic gangue assemblage dominated by fluorite, barite and calcite. The nearby E1 deposit, located 25 km to the NNE of Monakoff, and the large Ernest Henry deposit, 3 km to the west of E1, also contain abundant fluorite, barite and calcite in late stage assemblages. The three deposits, therefore, constitute a distinct group of IOCG deposits within the district, based on their F-rich geochemical and mineralogical affinities.The Monakoff ore zone is hosted in dilational openings along a shear zone developed within metasediments and metavolcanic rocks at the boundary between competent hangingwall rocks of the Toole Creek Volcanics and footwall rocks of the Mount Norna Quartzites. Four stages of alteration and mineralisation are recognised: Stage 1 garnet–biotite alteration; Stage 2 biotite–magnetite alteration; Stage 3 main F–Ba-ore mineralisation; and a Stage 4 pyrite–alloclasite Au–Co–As overprint. The E1 deposit has a more complex history, but Stage 5 has veins of fluorite–barite–carbonate that are comparable to Monakoff's main stage. The Stage 3 assemblage at Monakoff comprises a sheared groundmass of fluorite, barite, manganoan calcite, magnetite, chalcopyrite, pyrite, galena and sphalerite, with coarser grained pods of the same mineralogy interpreted to be dilational structures infilled during syn-ore deformation. Accessory minerals include U–Pb-oxides, REE–F-carbonates and Ag–Pb–Bi-sulfosalts, with no discrete Au minerals. The sulfosalts are interpreted to have formed from an immiscible Bi-melt within the mineralising fluid at temperatures higher than the melting point of Bi. The Stage 4 overprint at Monakoff contains pyrite and alloclasite. Laser ablation analyses of the sulphide minerals at Monakoff reveal that Stage 3 sulphides contain only trace amounts of Au (0.04 ppm in pyrite), although galena and chalcopyrite contain significant concentrations of Ag. Stage 4 pyrite and alloclasite, however, contain ~ 1 ppm Au in solid solution and mass balance calculations indicate the majority of bulk rock Au to be present in these minerals, although the majority of bulk Ag is present in Stage 3 sulphides. The Stage 5 veins at E1 have an identical gangue and accessory mineralogy to Stage 3 at Monakoff and differ in the sulphide mineralogy only in the lack of galena and sphalerite.Four fluid inclusion populations are identified within the fluorite at Monakoff: Group 1 is CO₂ rich; Group 2 is complex solid–liquid–vapour inclusions, with two groups based on homogenisation temperature (> 450 °C and 300–375 °C). Laser ablation-ICP-MS analyses indicate that these inclusions contain Cu, Pb, Zn, Fe, Mn, Mg, Ag, REE, U and Ba, but significantly no S, Se or Au; Group 3 are solid–liquid–vapour inclusions with a T_h of 200–275 °C, and contain Ba, Na, Mg, K and Br; and Group 4 are low salinity liquid–vapour inclusions. Group 1, 2 and 4 inclusions are also present in fluorite at E1. The REE geochemistry of fluorite from Monakoff and E1 is comparable and is characterised by a distinct positive Eu anomalies in all analyses, interpreted to indicate oxidising conditions at the time of high temperature ore deposition. The presence of abundant fluorite and barite is indicative of fluid mixing due to the insolubility of barite and fluorite and thus Ba and S, and Ca and F must have been introduced via different fluids. We propose that the oxidised fluid represented by the Group 2 inclusions and containing F, Ba, REE, U and base metals, mixed with a reduced, S-bearing fluid in a zone of dilation in the host shear zone that acted as a conduit for fluid flow during D₃ deformation. The source of the metal and F-rich fluid is likely to be the nearby granitic intrusions of the Williams–Naraku batholith, probably the Malakoff granite. This granite is also likely to be the source of the CO₂ represented by Group 1 fluid inclusions, and the REE, U, base metals and possibly Au, although the high Pb and Zn content of Monakoff and not E1 may suggest a local input of those elements at Monakoff. Stage 4 mineralisation overprints the F–Ba stage and is characterised by a Co–As–Au signature. At present it is unclear if this is a late stage, more reduced, evolution of the main ore fluid, or a separate mineralising event entirely.The presence of this F–Ba-metal-rich fluid has produced a distinctive style of IOCG mineralisation in the area to the north of Cloncurry. The probable link to the Malakoff granite implies that similar deposits may be present within several kilometres of the granite in suitable structural traps. Monakoff illustrates that although structurally controlled, the presence of Na–Ca alteration and ‘red rock’ K-alteration and brecciation are not key exploration criteria for these deposits. In addition, the presence of the overprinting As–Co–Au assemblage may indicate that this is a separate mineralising episode that may be present at other localities in the district. This study has also shown that fluorite can provide a powerful tool for determining ore forming conditions in F-rich IOCG systems.     

Geology,geochronology, geochemistry and ore genesis of the Wangu gold deposit in northeastern Hunan Province,Jiangnan Orogen,South China

The Wangu gold deposit in northeastern Hunan, South China, is one of many structurally controlled gold deposits in the Jiangnan Orogen. The host rocks (slates of the Lengjiaxi Group) are of Neoproterozoic age, but the area is characterized by a number of Late Jurassic–Cretaceous granites and NE-trending faults. The timing of mineralization, tectonic setting and ore genesis of this deposit and many similar deposits in the Jiangnan Orogen are not well understood. The orebodies in the Wangu deposit include quartz veins and altered slates and breccias, and are controlled by WNW-trending faults. The principal ore minerals are arsenopyrite and pyrite, and the major gangue minerals are quartz and calcite. Alteration is developed around the auriferous veins, including silicification, pyritic, arsenopyritic and carbonate alterations. Field work and thin section observations indicate that the hydrothermal processes related to the Wangu gold mineralization can be divided into five stages: 1) quartz, 2) scheelite–quartz, 3) arsenopyrite–pyrite–quartz, 4) poly-sulfides–quartz, and, 5) quartz–calcite. The Lianyunshan S-type granite, which is in an emplacement contact with the NE-trending Changsha-Pingjiang fracture zone, has a zircon LA-ICPMS U–Pb age of 142 ± 2 Ma. The Dayan gold occurrence in the Changsha-Pingjiang fracture zone, which shares similar mineral assemblages with the Wangu deposit, is crosscut by a silicified rock that contains muscovite with a ca. 130 Ma ⁴⁰Ar–³⁹Ar age. The gold mineralization age of the Wangu deposit is thus confined between 142 Ma and 130 Ma. This age of mineralization suggests that the deposit was formed simultaneously with or subsequently to the development of NE-trending extensional faults, the emplacement of Late Jurassic–Cretaceous granites and the formation of Cretaceous basins filled with red-bed clastic rocks in northeastern Hunan, which forms part of the Basin and Range-like province in South China. EMPA analysis shows that the average As content in arsenopyrite is 28.7 atom %, and the mineralization temperature of the arsenopyrite–pyrite–quartz stage is estimated to be 245 ± 20 °C from arsenopyrite thermometry. The high but variable Au/As molar ratios (>0.02) of pyrite suggest that there are nanoparticles of native Au in the sulfides. An integration of S–Pb–H–O–He–Ar isotope systematics suggests that the ore fluids are mainly metamorphic fluids originated from host rocks, possibly driven by hydraulic potential gradient created by reactivation of the WNW-trending faults initially formed in Paleozoic, with possible involvement of magmatic and mantle components channeled through regional fault networks. The Wangu gold deposit shares many geological and geochemical similarities as well as differences with typical orogenic, epithermal and Carlin-type gold deposits, and may be better classified as an “intracontinental reactivation” type as proposed for many other gold deposits in the Jiangnan Orogen.     

Re–Os dating of chalcopyrite from selected mineral deposits in the Kalatag district in the eastern Tianshan Orogen,China

The Kalatag Cu–Zn–Au district contains a number of economically important Cu deposits in eastern Tianshan in Xinjiang, NW China. Due to the lack of precise mineralization ages, the metallogenesis of this area has long been a matter of debate. In this study, chalcopyrite Re–Os isotope methods are used to date the South Meiling Cu–Zn and Hongshi Cu deposits in the eastern part of Kalatag area.The South Meiling Cu–Zn deposit is hosted in volcanic-sedimentary rocks of the Late Ordovician to Early Silurian Daliugou Formation. The deposit consists of two parts: a concordant massive sulfide ores and discordant vein-type ores located in the footwall strata. The principal ore minerals are pyrite, chalcopyrite, sphalerite, minor tetrahedrite, galena and pyrrhotite. Gangue minerals include quartz, sericite and barite, and minor chlorite, plagioclase and carbonate minerals. The Hongshi Cu deposit represents a hydrothermal vein system hosted in the mafic volcanic rocks of Daliugou Formation. The orebodies are associated with quartz veins and controlled by subsidiary faults of the Kalatag fault. The ore-forming process can be divided into the early, middle and late stages and is characterized by quartz–pyrite, quartz–chalcopyrite–pyrite and quartz–carbonate–gypsum veins, respectively.Re–Os analyses of chalcopyrite from the South Meiling Cu–Zn deposit yield an isochron age of 434.2 ± 3.9 Ma and initial ¹⁸⁷Os/¹⁸⁸Os ratio of 0.647 ± 0.098 (MSWD = 0.59). Re–Os analyses of chalcopyrite from the Hongshi Cu deposit yield an isochron age of 431.8 ± 2.7 Ma and initial ¹⁸⁷Os/¹⁸⁸Os ratio of − 0.165 ± 0.075 (MSWD = 0.77). Since chalcopyrite is the primary copper mineral, we interpret these isochron ages as the timing of Cu mineralization, based on field geology and petrographic evidence. These results suggest that the Re–Os ages presented here provide, for the first time, a direct constraint on an early Paleozoic Cu mineralization event of the eastern Tianshan Orogen. The high initial ¹⁸⁷Os/¹⁸⁸Os ratios (0.647 ± 0.098) ratio of ~ 434 Ma chalcopyrite from the South Meiling deposit suggest that the metal was sourced from a two end-member mixing of crust and mantle materials. Moreover, we propose that the VMS mineral system and hydrothermal vein system of the Kalatag district were related to the south-dipping subduction of the Kalamaili oceanic plate during the Late Ordovician–Silurian.     

A combined fluid inclusion and S–Pb isotope study of the Neoproterozoic Pingshui volcanogenic massive sulfide Cu–Zn deposit,Southeast China

The Pingshui Cu–Zn deposit is located in the Jiangshan–Shaoxing fault zone, which marks the Neoproterozoic suture zone between the Yangtze block and Cathaysia block in South China. It contains 0.45 million tons of proven ore reserves with grades of 1.03 wt.% Cu and 1.83 wt.% Zn. This deposit is composed of stratiform, massive sulfide ore bodies, which contain more than 60 vol.% sulfide minerals. These ore bodies are hosted in altered mafic and felsic rocks (spilites and keratophyres) of the bimodal volcanic suite that makes up the Neoproterozoic Pingshui Formation. Metallic minerals include pyrite, chalcopyrite, sphalerite, tennantite, tetrahedrite and magnetite, with minor galena. Gangue minerals are quartz, sericite, chlorite, calcite, gypsum, barite and jasper. Three distinct mineralogical zones are recognized in these massive sulfide ore bodies: a distal zone composed of sphalerite + pyrite + barite (zone I); an intermediate zone characterized by a pyrite + sphalerite + chalcopyrite assemblages (zone II); and a proximal zone containing chalcopyrite + pyrite + magnetite (zone III). A thin, layer of exhalative jaspilite overlies the sulfide ore bodies except in the proximal zone. The volcanic rocks of the Pingshui Formation are all highly altered spilites and keratophyres, but their trace element geochemistry suggests that they were generated by partial melting of the depleted mantle in an island arc setting. Homogenization temperatures of the primary fluid inclusions in quartz from massive sulfide ores are between 217 and 328 °C, and their salinities range from 3.2 to 5.7 wt.% NaCl equivalent. Raman spectroscopy of the fluid inclusions showed that water is the dominant component, with no other volatile components. Fluid inclusion data suggest that the ore-forming fluids were derived from circulating seawater. The δ³⁴S values of pyrite from the massive sulfide ores range from − 3.6‰ to + 3.4‰, indicating that the sulfur was primarily leached from the arc volcanic rocks of the Pingshui Formation. Both pyrite from the massive sulfide ores and plagioclase from the spilites have similar lead isotope compositions, implying that the lead was also derived from the Pingshui Formation. The low lead contents of the massive sulfide ores and the geochemistry of their host rocks are similar to many VMS Cu–Zn deposits in Canada (e.g., Noranda) and thus can be classified as belonging to the bimodal-mafic subtype. The presence of magnetite and the absence of jaspilite and barite at the − 505 m level in the Pingshui deposit suggest that this level is most likely the central zone of the original lateral massive sulfide ore bodies. If this interpretation is correct, the deep part of the Pingshui Cu–Zn deposit may have significant exploration potential.     

The Mesoproterozoic Abra polymetallic sedimentary rock-hosted mineral deposit,Edmund Basin,Western Australia

Abra is a blind, sedimentary rock-hosted polymetallic Fe–Pb–Zn–Ba–Cu ± Au ± Ag ± Bi ± W deposit, discovered in 1981, located within the easterly trending Jillawarra rift sub-basin of the Mesoproterozoic Edmund Basin, Capricorn Orogen, Western Australia. The Edmund Basin contains a 4–10 km thick succession of siltstone, sandstone, dolomitic siltstone, and stromatolitic dolomite. The age of the Edmund Group is between 1.66 and 1.46 Ga. The Abra polymetallic deposit is hosted in siltstone, dolostone, sandstone and conglomerate of the Irregully and Kiangi Creek Formations, but the mineralised zones do not extend above an erosion surface marking the change from fluvial to marine facies in the lower part of the Kiangi Creek Formation. The Abra deposit is characterised by a funnel-shaped brecciated zone, interpreted as a feeder pipe, overlain by stratiform–stratabound mineralisation. The stratiform–stratabound mineralisation includes a Red Zone and an underlying Black Zone. The Red Zone is characterised by banded jaspilite, hematite, galena, pyrite, quartz, barite, and siderite. The jaspilite and hematite cause the predominant red colouration. The Black Zone consists of veins and rhythmically banded sulphides, laminated and/or brecciated hematite, magnetite, Fe-rich carbonate and scheelite. In both zones, laminations and bands of sulphide minerals, Fe oxides, barite and quartz commonly exhibit colloform textures. The feeder pipe (Stringer Zone) merges with Black Zone and consists of a stockwork of Fe-carbonate-quartz, barite, pyrite, magnetite and chalcopyrite, exhibiting fluidised and/or jigsaw textures.The Abra mineral system is characterised by several overprinting phases of hydrothermal activity, from several stages of brecciation and fluidisation, barite and sulphide veining to barren low-temperature chalcedonic (epithermal regime) veining. Hydrothermal alteration minerals include multi-stage quartz, chlorite, prehnite, Fe-rich carbonate and albite. Albite (Na metasomatism) is an early alteration phase, whereas Fe-rich carbonate is a late phase. Fluid inclusion studies indicate that the ore fluids had temperatures ranging from 162 to 250 °C, with salinities ranging from 5.8 to about 20 wt.% NaCl. In the course of our studies, microthermometric and Raman microprobe analyses were performed on fluid inclusions in carbonate, quartz and barite grains. Fluid inclusions in quartz show homogenisation temperatures ranging from 150 to 170 °C with calculated salinities of between 3.7 and 13.8 wt.% NaCl.The sulphur isotopic system shows δ³⁴S values ranging from 19.4 to 26.6‰ for sulphides and from 37.4 to 41.9‰ for barite (Vogt and Stumpfl, 1987, Austen, 2007). Sulphur isotope thermometry between sulphides and sulphide–barite pairs yields values ranging from 219 to 336 °C (Austen, 2007).Galena samples were analysed for Pb isotope ratios, which have been compared with previous Pb isotopic data. The new Pb isotope systematics show model ages of 1650–1628 Ma, consistent with the formation of the host Edmund Basin.Re–Os dating of euhedral pyrite from the Black Zone yielded an age of ~ 1255 Ma. This age corresponds to the 1320–1170 Ma Mutherbukin tectonic event in the Gascoyne Complex. This event is manifested primarily along a WNW-trending structural corridor of amphibolite facies rocks, about 250 km to the northwest of the Abra area. It is possible that the Re–Os age represents a younger re-activation event of an earlier SEDEX style system with a possible age range of 1640–1590 Ma.A genetic model for Abra is proposed based on the above data. The model involves two end-members ore-forming stages: the first is the formation of the SEDEX style mineral systems, followed by a second multi-phase stage during which there was repeated re-working of the mineral system, guided by seismic activity along major regional faults.     

Geochemical and mineralogical characteristics of weathered ore in the Dalucao REE deposit,Mianning–Dechang REE Belt,western Sichuan Province,southwestern China

The Dalucao deposit in western Sichuan Province, southwest China, is one of the largest and most extensive rare earth element (REE) deposits in the Himalayan Mianning–Dechang REE Belt. Moreover, this is the only deposit identified in the southern part of the belt. The deposit contains the No. 1, 2, and 3 orebodies. The No. 1 and 3 orebodies are hosted in two breccia pipes within syenite–carbonatite rocks that intrude a Proterozoic quartz–diorite pluton. Both breccia pipes have elliptical horizontal cross-sections at the surface, being 200–400 m long, 180–200 m wide, and extending to > 450 m depth. The No. 1 and No. 3 orebodies have total thicknesses of 55–175 m and 14–58 m, respectively. REE mineralization is associated with four brecciation events that are recorded in both pipes. The ore grades in the No. 1 and 3 orebodies are similar, with the rocks containing 1.0–4.5% rare earth oxides (REOs). The No. 1 orebody is characterized by a mineral assemblage comprising fluorite + barite + celestite + bastnäsite (i.e., Type I), whereas the No. 3 orebody is characterized by an assemblage comprising fluorite + celestite + pyrite + muscovite + bastnäsite + strontianite (i.e., Type II). Significant amounts of weathered high-grade REE ore (up to 60 wt.% of the rock mass) is mainly present in the No. 1 orebody. This is the main ore-type targeted for exploration within the Dalucao deposit, but is rarely present in other deposits in the Mianning–Dechang REE Belt.Faulting and cryptoexplosive breccia events, possibly linked to movement on the Panxi Fault, were more common in the No. 1 orebody than in the No. 3 orebody. This facilitated the introduction of ore-forming hydrothermal fluids and provided space for the precipitation of REE minerals. Based on the present results, we infer that the Dalucao deposit was the product of multiple stages of ore formation. REE minerals formed in envelopes around, or fractures within, quartz, fluorite, calcite, barite, and celestite in the brecciated ores. The main REE minerals were deposited from hydrothermal fluids within cryptoexplosive breccia, followed by weathering that increased the ore grade. Petrographic studies and X-ray powder diffraction (XRD) analyses indicate that the weathered ore contains 5–60% REE minerals (including bastnäsite, parisite, and monazite), together with gangue (quartz, barite, celestite, and fluorite), large amount of clay minerals (smectite, illite, kaolinite, and sepiolite), and relict igneous minerals (quartz, albite, and K-feldspar). The weathered samples are strongly enriched in La (up to 92,390 ppm), Ce (up to 103,500 ppm), Pr (up to 8006 ppm), and Nd (up to 16,690 ppm) compared with the unweathered brecciated ores. Conversely, Sr concentrations are significantly more enriched in the brecciated ores (up to 256,500 ppm) than in the weathered ores (generally less than 2671 ppm with one exception of 37,850 ppm) due to less celestite. Calcite is largely absent from the weathered ores (except one sample with up to 30% mode), which contrasts with the brecciated ores that contain up to 75% calcite. The effects of weathering, oxidation, loss of ions, and hydration on the brecciated ores led to the refertilization of the REEs and an increase in the grade of the ore deposit.     

A preliminary investigation and evaluation of the thallium environmental impacts of the unmined Xiangquan thallium-only deposit in Hexian,China

The Xiangquan Thallium-only deposit in Hexian, east China is a newly found near-surface and unmined shallow-seated thallium deposit. The 250t Tl deposit is hosted in Lower Ordovician Lunshan Group as lenticular and confined by northeast F1, F2 faults. The metallic minerals are dominated by pyrite, more than 95% Tl occurs in pyrite as tiny individual grains or as ‘‘invisible thallium”. Tl and other trace elements pollution in ecosystems such as soils, surface and ground waters and water sediments, plants and crops, and animal and human beings in Xiangquan near the Tl ore deposit have been investigated and evaluated. Results show that Tl as well as As and Sb in ecosystems in Xiangquan around the deposit have enriched, they came from Tl-pyrite in the ore bodies and in the parent rocks of weathered soils on top of the ore bodies and went into the nearby ecosystems through weathering, leaching and dissolving. In 2 km² around the Xiaolongwang Mountain where the Tl ore deposit seated, soils, vegetables, crops have been polluted or heavily polluted by Tl, As and Sb. Farmlands near the ore body are not fit to grow vegetables and crops. Thermal Spring water in Xiangquan town and pond water close to the Tl deposit are not potable. Tl also enriches in human hair and urinate of villagers who live close to the Tl deposit. Even through the Tl-only deposit has put clear environmental impacts on the local environment and ecosystems around it, no serious consequences of Tl pollution have so far taken place due to unmining of the Tl deposit as well as the screen effect of the silicficious breccia cap on top of it. All this work adds new knowledge to understand Tl behavior in unmined Tl deposit, and also benefit to the local environmental protection and the future mineral resources exploration.     

Nakhlak carbonate-hosted Pb(Ag) deposit,Isfahan province,Iran: a geological,mineralogical, geochemical,fluid inclusion,and sulfur isotope study

The Upper Cretaceous Nakhlak epigenetic vein-type Pb(Ag) deposit is located 55 km northeast of the town of Anarak in Isfahan Province, Iran. The deposit contains 7 Mt of galena-barite ore with an average grade of 8.33% Pb, 0.38% Zn, and 72 ppm Ag. The ore mineralization occurs as stratabound, epigenetic, steeply dipping, east-west–trending veins in faulted- or fracture-controlled Upper Cretaceous Sadar carbonates. Galena and barite are the primary minerals. Minor sphalerite, tennantite-tetrahedrite, pyrite, and chalcopyrite occur as inclusions in galena. Cerussite with minor amounts of anglesite and plattnerite formed in the oxidized supergene zone. The ore and ore-related minerals were deposited in the hydrothermally dolomitized carbonate host rock containing saddle-shaped dolomite. Geochemically, the dolomitized carbonate host rocks are enriched in MgO, Fe₂O₃, MnO, Pb, Zn, and Ba, but depleted in CaO. The galena concentrate contains high values of Ag (932 ppm), Sb (342 ppm), Cu (422 ppm), As (91 ppm), and Zn (296 ppm); the presence of these trace elements indicates a low-temperature type of galena mineralization. This interpretation is corroborated by fluid inclusions containing 12.98 wt.% NaCl equivalent salinity; the inclusions homogenize at the low temperature of about 152.1 °C. The similarity between δ³⁴S_(V-CDT) values in Nakhlak barite and Permian–Triassic δ³⁴S marine sulfate values indicates that the Nakhlak sulfur was probably provided from evaporates of Permian–Triassic age. The δ³⁴S_(V-CDT) values of galena and barite samples occupy the ranges of − 1.04‰ to + 8.62‰ and + 10.95‰ to + 13.71‰, respectively, and are similar to Mississippi Valley–type (MVT) deposits. The low-temperature basinal fluids, evaporate-originated sulfur, and fault- or fracture-controlled galena-rich veins in the Nakhlak deposit resemble the type of geological features documented in Pb-rich MVT deposits.     

The genesis of metal zonation in the Weilasituo and Bairendaba Ag–Zn–Pb–Cu–(Sn–W) deposits in the shallow part of a porphyry Sn–W–Rb system,Inner Mongolia,China

The Weilasituo and Bairendaba Zn–Pb–Ag–Cu–(Sn–W) sulphide deposits are located in the southern part of Great Xing'an Range of Inner Mongolia in China. The deposits are located at shallow depths in the newly discovered Weilasituo porphyry hosting Sn–W–Rb mineralization. The mineralization at Weilasituo and Bairendaba consist of zoned massive sulphide veins within fractures cutting the Xilinhot Metamorphic Complex and quartz diorite. The Weilasituo deposit gradually zones from the Cu-rich Zn–Cu sulphide mineralization in the west to Zn-rich Zn–Cu sulphide mineralization in the east. The Bairendaba deposit has a Cu-bearing and Zn-rich core through a transitional zone devoid of copper to an outer zone of Zn–Pb–Ag mineralization. Three main veins contain more than 50 wt.% of the contained metal in the two deposits with their metal ratios displaying a systematic and gradual increase in Zn/Cu, Pb/Zn and Ag/Zn ratios from the western part of Weilasituo to the eastern part of Bairendaba.Three stages of vein-type mineralization are recognized. Early, sub-economic mineralization consists of a variable proportion of euhedral arsenopyrite, pyrite, quartz, and rare wolframite, scheelite, cassiterite, magnetite and cobaltite. This was succeeded by main stage mineralization with economic concentration of zoned Cu, Zn, Pb and Ag sulphide minerals along strike within the veins. The zones consist of the assemblages: (1) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–quartz–fluorite) at west Weilasituo; (2) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) at east Weilasituo; (3) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) in the centre of Bairendaba; (4) pyrrhotite–Fe-rich sphalerite–galena(–chalcopyrite–tetrahedrite–quartz–fluorite) in the transition zone of Bairendaba; and (5) pyrrhotite–Fe-rich sphalerite–galena–tetrahedrite(–chalcopyrite–falkmanite–argentite–pyrargyrite–quartz–fluorite) in the outer zone at Bairendaba. Post-main ore stage is devoid of sulphides and characterized overprinting of fluorite, sericite, chlorite, illite, kaolinite and calcite.Zircon SHRIMP U–Pb dating, Zircon LA–ICP–MS U–Pb dating, molybdenite Re–Os isochron dating, and muscovite Ar–Ar dating indicate the Beidashan granitic batholith was intruded at 140 ± 3 Ma (MSWD = 3.3), the porphyritic monzogranite from marginal facies of the Beidashan batholith was intruded at 139 ± 2 Ma (MSWD = 0.75), the mineralized quartz porphyry was intruded at 135 ± 2 Ma (MSWD = 0.91), the greisen mineralization occurred at 135 ± 11 Ma (MSWD = 7.2), and the post-main ore stage muscovite deposited at 129.5 ± 0.9 Ma. The new geochronology data show the porphyry Sn–W–Rb and vein-type sulphide mineralization are contemporaneous with granitic magmatism in the region.The metal zonation at the Weilasituo and Bairendaba deposits is a result of progressive metal deposition. This was during the evolution of a metal-bearing fluid along the strike of the veins and during the main stage of ore formation at the upper part of the deep-seated porphyry Sn–W–Rb system. This progressive zonation indicates that the deposits represent end-numbers formed from one ore-forming fluid, which moved from west to east from the porphyry. The metal zonation patterns of the major veins are consistent with metal-bearing fluid entering the system with the precipitation of chalcopyrite proximally and sphalerite, galena and Ag-bearing minerals more distally. We show that the mechanism of metal deposition is therefore controlled by thermodynamic conditions resulting in the progressive separation of sulphides from the metal-bearing fluid. The temperature gradient between the inflow zone and the outflow zone appears to be one of the key parameters controlling the formation of the metal zonation pattern. The sulphide precipitation sequence is consistent with a low fS₂ and low fO₂ state of the acidic metal-bearing fluid. The metal zonation pattern provides helpful clues from which it is possible to establish the nature of fluid migration and metal deposition models to locate a possible porphyry mineralization at depth in the Great Xing'an Range, which is consistent with the geology of the newly discovered porphyry Sn–W–Rb system.     

Ore petrology,hydrothermal alteration,fluid inclusions,and sulfur stable isotopes of the Milin Kamak intermediate sulfidation epithermal Au-Ag deposit in Western Srednogorie,Bulgaria

The Milin Kamak gold-silver deposit is located in Western Srednogorie zone, 50 km west of Sofia, Bulgaria. This zone belongs to the Late Cretaceous Apuseni-Banat-Timok-Srednogorie magmatic and metallogenic belt. The deposit is hosted by altered trachybasalt to andesitic trachybasalt volcanic and volcanoclastic rocks with Upper Cretaceous age, which are considered to be products of the Breznik paleovolcano. Milin Kamak is the first gold-silver intermediate sulfidation type epithermal deposit recognized in Srednogorie zone in Bulgaria. It consists of eight ore zones with lengths ranging from 400 to 1000 m, widths from several cm to 3–4 m, rarely to 10–15 m, an average of 80–90 m depth (a maximum of 200 m) and dip steeply to the south. The average content of gold is 5.04 g/t and silver – 13.01 g/t. The styles of alteration are propylitic, sericite, argillic, and advanced argillic. Ore mineralization consists of three stages. Quartz-pyrite stage I is dominated by quartz, euhedral to subhedral pyrite, trace pyrrhotite and hematite in the upper levels of the deposit. Quartz-polymetallic stage II is represented by major anhedral pyrite, galena, Fe-poor sphalerite; minor chalcopyrite, tennantite, bournonite, tellurides and electrum; and trace pyrrhotite, arsenopyrite, marcasite. Gangue minerals are quartz and carbonates. The carbonate-gold stage III is defined by deposition of carbonate minerals and barite with native gold and stibnite.Fluid inclusions in quartz are liquid H₂O-rich with homogenization temperature (T_h) ranging from 238 to 345 °C as the majority of the measurements are in the range 238–273 °C. Ice-melting temperatures (T_m) range from −2.2 to −4.1 °C, salinity – from 3.7 to 6.6 wt.% NaCl equiv. These measurements imply an epithermal environment and low- to moderate salinity of the ore-forming fluids.δ³⁴S values of pyrite range from −0.49 to +2.44‰. The average calculated δ³⁴S values are 1.35‰. The total range of δ³⁴S values for pyrite are close to zero suggesting a magmatic source for the sulfur.     

重晶石矿自然重砂矿物组合规律及其找矿意义

在丰富的自然重砂数据资料基础上,对全国各省37个典型重晶石矿床中的自然重砂矿物报出结果进行了相关研究,发现2种成因类型的重晶石矿床具有特定的自然重砂矿物组合,沉积型重晶石矿床的自然重砂矿物组合为重晶石+黄铁矿+褐铁矿,热液型自然重砂矿物组合为重晶石+铅族矿物+黄铜矿+萤石+黄铁矿+闪锌矿+辉锑矿+孔雀石。同时,对此特征性自然重砂矿物组合进行了相关分析,为重晶石的找矿矿物学发展提出相关建议。     

The Hakkari nonsulfide Zn–Pb deposit in the context of other nonsulfide Zn–Pb deposits in the Tethyan Metallogenic Belt of Turkey

The Hakkari nonsulfide zinc deposit is situated close to the southeastern border of Turkey. Here both sulfide and nonsulfide Zn ≫ Pb ores are hosted in carbonate rocks of the Jurassic Cudi Group with features typical of carbonate-hosted supergene nonsulfide zinc mineralization. The regional strike extent of the mineralized district is at least 60 km. The age of the supergene deposit has not been determined, but it is probable that the main weathering happened during Upper Tertiary, possibly between Upper Miocene and Lower Pliocene. The Hakkari mineralization can be compared to other carbonate-hosted Zn–Pb deposits in Turkey, and an interpretation made of its geological setting. The zinc mineral association at Hakkari typically comprises smithsonite and hemimorphite, which apparently replace both sulfide minerals and carbonate host rock. Two generations of smithsonite are present: the first is relatively massive, the second occurs as concretions in cavities as a final filling of remnant porosity. Some zinc is also hosted within Fe–Mn-(hydr)oxides. Lead is present in cerussite, but also as partially oxidized galena. Lead can also occur in Mn-(hydr)oxides (max 30% PbO). The features of the supergene mineralization suggest that the Hakkari deposit belongs both to the “direct replacement” and the “wall-rock replacement” types of nonsulfide ores. Mineralization varies in style from tabular bodies of variable thickness (< 0.5 to 13 m) to cross-cutting breccia zones and disseminated ore minerals in pore spaces and fracture planes. At Hakkari a As–Sb–Tl(≫ Hg) geochemical association has been detected, which may point to primary sulfide mineralization, quite different from typical MVT.     

40Ar/39Ar dating of the Jiehe gold deposit in the Jiaodong Peninsula,eastern North China Craton: Implications for regional gold metallogeny

The Jiehe gold deposit, containing a confirmed gold reserve of 34 tonnes (t), is a Jiaojia-type (disseminated/stockwork-style) gold deposit in Jiaodong Peninsula. Orebodies are hosted in the contact zone between the Jurassic Moshan biotite granite and the Cretaceous Shangzhuang porphyritic granodiorite, and are structurally controlled by the NNE- to NE-striking Wangershan-Hedong Fault. Sulphide minerals are composed predominantly of pyrite with lesser amounts of chalcopyrite, galena, and sphalerite. Hydrothermal alteration is strictly controlled by fracture zones, in which disseminated sulfides and native gold are spatially associated with pervasive sericitic alteration. Mineralogical, textural, and field relationships indicate four stages of alteration and mineralization, including pyrite-bearing milky and massive quartz (stage 1), light-gray granular quartz–pyrite (stage 2), quartz–polysulfide (stage 3) and quartz–carbonate (stage 4) stages. Economic gold is precipitated in stages 2 and 3.The Jiehe deposit was previously considered to form during the Eocene (46.5 ± 2.3 Ma), based on Rb-Sr dating of sericite. However, ⁴⁰Ar/³⁹Ar dating of sericite in this study yields well-defined, reproducible plateau ages between 118.8 ± 0.7 Ma and 120.7 ± 0.8 Ma. These ⁴⁰Ar/³⁹Ar ages are consistent with geochronological data from other gold deposits in the region, indicating that all gold deposits in Jiaodong formed in a short-term period around 120 Ma. The giant gold mineralization event has a tight relationship with the extensional tectonic regime, and is a shallow crustal metallogenic response of paleo-Pacific slab subduction and lithospheric destruction in the eastern NCC.     

Geology,geochemistry and genesis of the Qianfanling quartz-vein Mo deposit in Songxian County,Western Henan Province,China

The Qianfanling Mo deposit, located in Songxian County, western Henan province, China, is one of the newly discovered quartz-vein type Mo deposits in the East Qinling–Dabie orogenic belt. The deposit consists of molybdenite in quartz veins and disseminated molybdenite in the wall rocks. The alteration types of the wall rocks include silicification, K-feldspar alteration, pyritization, carbonatization, sericitization, epidotization and chloritization. On the basis of field evidence and petrographic analysis, three stages of hydrothermal mineralization could be distinguished: (1) pyrite–barite–quartz stage; (2) molybdenite–quartz stage; (3) quartz–calcite stage.Two types of fluid inclusions, including CO₂-bearing fluid inclusions and water-rich fluid inclusions, have been recognized in quartz. Homogenization temperatures of fluid inclusions vary from 133 °C to 397 °C. Salinity ranges from 1.57 to 31.61 wt.% NaCl eq. There are a large number of daughter mineral-CO₂-bearing inclusions, which is the result of fluid immiscibility. The ore-forming fluids are medium–high temperature, low to moderate salinity H₂O–NaCl–CO₂ system. The δ³⁴S values of pyrite, molybdenite, and barite range from − 9.3‰ to − 7.3‰, − 9.7‰ to − 7.3‰ and 5.9‰ to 6.8‰, respectively. The δ¹⁸O values of quartz range from 9.8‰ to 11.1‰, with corresponding δ¹⁸O_fluid values of 1.3‰ to 4.3‰, and δ¹⁸D values of fluid inclusions of between − 81‰ and − 64‰. The δ¹³C_V-PDB values of fluid inclusions in quartz and calcite have ranges of − 6.7‰ to − 2.9‰ and − 5.7‰ to − 1.8‰, respectively. Sulfur, hydrogen, oxygen and carbon isotope compositions show that the sulfur and ore-forming fluids derived from a deep-seated igneous source. During the peak collisional period between the North China Craton and the Yangtze Craton, the ore-forming fluids that derived from a deep igneous source extracted base and precious metals and flowed upwards through the channels that formed during tectonism. Fluid immiscibility and volatile exsolution led to the crystallization of molybdenite and other minerals, and the formation of economic orebodies in the Qianfanling Mo deposit.     

Hydrothermal alteration and ore-forming fluids associated with gold-tellurium mineralization in the Dongping gold deposit,China

The Dongping gold deposit hosted in syenites is one of the largest hydrothermal gold deposits in China and composed of ore veins in the upper parts and altered zones in the lower parts of the ore bodies. Pervasive potassic alteration and silicification overprint the wall rocks of the ore deposit. The alteration minerals include orthoclase, microcline, perthite, quartz, sericite, epidote, calcite, hematite and pyrite, with the quartz, pyrite and hematite assemblages closely associated with gold mineralization. The phases of hydrothermal alteration include: (i) potassic alteration, (ii) potassic alteration - silicification, (iii) silicification - epidotization - hematitization, (iv) silicification - sericitization - pyritization and (v) carbonation. Mass-balance calculations in potassic altered and silicified rocks reveal the gain of K₂O, Na₂O, SiO₂, HFSEs and transition elements (TEs) and the loss of REEs. Most major elements were affected by intense mineral reactions, and the REE patterns of the ore are consistent with those of the syenites. Gold, silver and tellurium show positive correlation and close association with silicification. Fluid inclusion homogenization temperatures in quartz veins range from 154 °C to 382 °C (peak at 275 °C–325 °C), with salinities of 4–9 wt.% NaCl equiv. At temperatures of 325 °C the fluid is estimated to have pH = 3.70–5.86, log fO₂ = − 32.4 to − 28.1, with Au and Te transported as Au (HS)₂⁻ and Te₂^2 − complexes. The ore forming fluids evolved from high pH and fO₂ at moderate temperatures into moderate-low pH, low fO₂ and low temperature conditions. The fineness of the precipitated native gold and the contents of the oxide minerals (e.g., magnetite and hematite) decreased, followed by precipitation of Au- and Ag-bearing tellurides. The hydrothermal system was derived from an alkaline magma and the deposit is defined as an alkaline rock-hosted hydrothermal gold deposit.     

The Syama and Tabakoroni goldfields,Mali

Gold deposits in the Syama and Tabakoroni goldfields in southern Mali occur along a north-northeast trending mineralised litho-structural corridor that trends for approximately 40 km. The deposits are interpreted to have formed during a craton-wide metallogenic event during the Eburnean orogeny. In the Syama goldfield, gold mineralisation in 9 deposits is hosted in the hanging-wall of the Syama-Bananso Shear Zone in basalt, greywacke, argillite, lamprophyre, and black shale. Gold is currently mined primarily from the oxidised-weathered zone of the ore bodies. In the Syama deposit, mineralisation hosted in altered basalt is associated with an intense ankerite–quartz–pyrite stockwork vein systems, whereas disseminated style mineralisation is also present in greywackes. In contrast, the Tellem deposit is hosted in quartz–porphyry rocks.In the Tabakoroni goldfield, gold mineralisation is hosted in quartz veins in tertiary splay shears of the Syama-Bananso Shear Zone. The Tabakoroni orebody is associated with quartz, carbonate and graphite (stylolite) veins, with pyrite and lesser amounts of arsenopyrite. There are four main styles of gold mineralisation including silica-sulphide lodes in carbonaceous fault zones, stylolitic quartz reefs in fault zones, quartz–Fe–carbonate–sulphide lodes in mafic volcanics, and quartz–sulphide stockwork veins in silicified sediments and porphyry dykes. The several deposit styles in the goldfield thus present a number of potential exploration targets spatially associated with the regional Syama-Bananso Shear Zone and generally classified as orogenic shear-hosted gold deposits.     

Mineral chemical investigation on sulfide mineralization of the Istala deposit,Gümüşhane,NE-Turkey

The mineralogy of the Istala deposit, Gümüşhane, northeastern Turkey, was studied in detail, and a geochemical investigation was carried out using electron probe micro-analysis (EPMA). Sphalerite, galena, chalcopyrite and pyrite are the major sulfide minerals found in the Istala deposit, with minor amounts of bornite, idaite, tetrahedrite–tennantite, anilite, yarrowite, mckinstryite, covellite and chalcocite. In addition to these, barite and a small quantity of quartz occur as gangue minerals. Based on the textural relations and mineral assemblages, five different stages of crystallization have been recognized. Mineral paragenesis of the first four stages has been found to be similar, whereas clear enrichment has been observed in the modal abundance of the copper sulfide mineral assemblage at the fifth-stage ore formation. Whole-rock geochemical analyses of the Istala ore show an enrichment of Ag content up to 3328 ppm. Optical observations and EPMA study indicated that abundant silver mineralization was found in the Istala ore, especially during the later-stage ore deposition. Repetition to the presence of native silver in the samples, a significant amount of silver was incorporated in bornite, idaite, tetrahedrite–tennantite, anilite, yarrowite, mckinstryite, covellite and chalcocite, whereas a trace amount of silver has been detected in sphalerite, galena, chalcopyrite and pyrite. The homogenization temperatures (T_h) of the primary fluid inclusions were measured between 98 and 284 °C, with frequency peaks around 140 °C, 190 °C and 240 °C. All data obtained support the theory that later stage copper-rich sulfides, formed under the low temperature conditions, are responsible for the large amounts of silver content in the Istala mine.     

Fluid inclusions and H–O–S–Pb isotope systematics of the Baishan porphyry Mo deposit in Eastern Tianshan,China

The Baishan porphyry Mo deposit formed in the Middle Triassic in Eastern Tianshan, Xinjiang, northwestern China. Mo mineralization is associated with the Baishan monzogranite and granite porphyry stocks, mainly presenting as various types of hydrothermal veinlets in alerted wall rocks, with potassic, phyllic, propylitic, and fluorite alteration. The ore-forming process can be divided into four stages: stage I K-feldspar–quartz–pyrite veinlets, stage II quartz–molybdenite ± pyrite veinlets, stage III quartz–polymetallic sulfide veinlets and stage IV barren quartz–calcite veins. Four types of fluid inclusions (FIs) can be distinguished in the Baishan deposit, namely, liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), solid-bearing multi-phase (S-type) and mono-phase vapor (M-type) inclusions, but only the stage I quartz contains all types of FIs. The stages II and III quartz have three types of FIs, with exception of M-type. In stage IV quartz minerals, only the L-type inclusions can be observed. The FIs in quartz of stages I, II, III and IV are mainly homogenized at temperatures of 271–468 °C, 239–349 °C, 201–331 °C and 134–201 °C, with salinities of 2.2–11.6 wt.% NaCl equiv., 1.1–10.2 wt.% NaCl equiv., 0.5–8.9 wt.% NaCl equiv. and 0.2–5.7 wt.% NaCl equiv., respectively. The ore-forming fluids of the Baishan deposit are characterized by high temperature, moderate salinity and relatively reduced condition, belonging to a H₂O–NaCl ± CH₄ ± CO₂ system. Hydrogen and oxygen isotopic compositions of quartz indicate that the ore-forming fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials came predominantly from a deep-seated magma source from the lower continental crust. The Mo mineralization in the Baishan deposit is estimated to have occurred at a depth of no less than 4.7 km, and the decrease in temperature and remarkable transition of the redox condition (from alkalinity to acidity) of ore-forming fluids were critical for the formation of the Baishan Mo deposit.     

Geology,fluid inclusion and stable isotopes (O,S) of the Hetaoping distal skarn Zn-Pb deposit,northern Baoshan block,SW China

The Hetaoping zinc–lead deposit is located in the northern Baoshan block, Sanjiang region, SW China. The ore deposit comprises massive orebodies in the lower part and lenticular and vein-like orebodies in the upper part, both of which are hosted in the marbleized Upper Cambrian limestone and slate of the Hetaoping Formation. Three mineralization stages of Hetaoping skarn system have been recognized based on petrographic observation, which are pre-ore stage (pyroxene–garnet–actinolite–epidote–magnetite), syn-ore stage (sulfides–quartz–calcite–fluorite), and post-ore stage (calcite–quartz–chlorite). Andradite and hedenbergite are dominant in pre-ore garnet and pyroxene, respectively. Ore minerals consist of mainly pyrite, sphalerite, chalcopyrite, bornite and galena. Three types of fluid inclusions have been identified in Hetaoping, including primary two-phase (A type), primary three-phase (B type) and secondary two-phase (C type) inclusions. Based on fluid inclusion microthermometric study, the fluids forming the Hetaoping skarn minerals and sulfides evolved from high-moderate temperature (255–498 °C) and low-moderate salinity (5.0–18.0 wt.% NaCl equiv) in pre-ore stage, through moderate-low temperature (152–325 °C) and low salinity (0.4–14.2 wt.% NaCl equiv) in syn-ore stage, to low temperature (109–205 °C) and low salinity (0.9–10.0 wt.% NaCl equiv) in post-ore stage. The sulfide δ³⁴S values range from 3.7 to 7.1‰ (mean = 5.2‰, n = 29), indicative of a dominantly magmatic sulfur origin. Silicate and carbonate oxygen isotopes give calculated δ¹⁸O_H2O ranges of 3.9–11.1‰ in prograde stage, − 0.9 to 4.6‰ in early retrograde stage, and − 1.3 to 2.9‰ in late retrograde stage (syn-ore stage), The oxygen isotope data reveal that the prograde fluid in Hetaoping could be primarily magmatic, which has been mixed significantly with meteoric water in the late retrograde stage. Such a fluid mixing process is considered to be a key factor controlling ore precipitation.