论华北克拉通南缘霍邱群变质作用、形成时代及霍邱BIF铁矿成矿机制

安徽霍邱铁矿位于华北克拉通南缘,是一个大型BIF铁矿田,矿体均赋存于一套新太古代中高级变质作用的含铁建造中,自下而上可分为A+B矿带和D矿带:前者为变粒岩-片岩-磁铁石英岩建造;后者为片岩-大理岩-赤铁(镜)铁石英岩建造.本文利用现有的矿床勘查、物化探和地质科研资料,对该矿田的地质背景、矿体赋存条件、构造型式进行深入剖析,推断矿区周边及深部构造格局与控矿因素,研究分析霍邱铁矿含铁岩系特征,进行含矿层位的准确划分、厘定和对比,深入研究含铁岩系的平面分布范围和延深,对矿田控矿构造进行综合分析.运用LA-ICP-MS技术获得霍邱群斜长角闪岩最老年龄为2.8Ga左右,代表原岩形成年代.同时获得晚期混合花岗岩的侵入年龄为1.8Ga左右.通过Hf同位素测定,获得各变质岩系锆石的Hf同位素组成,表明最老的锆石Hf模式年龄可达3.5Ca前后.根据区域年代学资料和霍邱铁矿含铁岩系特征,本文正式提出“霍颍运动”这一概念,作为皖西北新太古代2.7Ga前后在霍邱-颍上-寿县-蒙城一带发生的构造事件和成矿作用,以区别于以往沿用蚌埠运动描述本区霍邱群变质作用和成矿事件的提法.最后结合本区含铁建造特征,初步判定霍邱铁矿为一种介于阿尔戈玛和苏必利尔型之间的过渡类型铁建造.     

The composition and genesis of the Mesoarchean Dagushan banded iron formation (BIF) in the Anshan area of the North China Craton

The Dagushan BIF-hosted iron deposit in the Anshan–Benxi area of the North China Craton (NCC) has two types of iron ore: quartz–magnetite BIF (Fe₂O₃^T < 57 wt.%) and high-grade iron ore (Fe₂O₃^T > 90 wt.%). Chlorite-quartz schist and amphogneiss border the iron orebodies and are locally present as interlayers with BIFs; chlorite-quartz schist and BIFs are enclosed by amphogneiss in some locations. The quartz–magnetite BIFs are enriched in HREEs (heavy rare earth elements) with positive La, Eu and Y anomalies, indicating their precipitation from marine seawater with a high-temperature hydrothermal component. Moreover, these BIFs have low concentrations of Al₂O₃, TiO₂ and HFSEs (high field strength elements, e.g., Zr, Hf and Ta), suggesting that terrigenous detrital materials contributed insignificantly to the chemical precipitation. The high-grade iron ores exhibit similar geochemical signatures to the quartz–magnetite BIFs (e.g., REE patterns and Y/Ho ratios), implying that they have identical sources of iron. However, these ores have different REE (rare earth element) contents and Eu/Eu* values, and the magnetites contained within them exhibit diverse REE contents and trace element concentrations, indicating that the ores underwent differing formation conditions, and the high-grade ores are most likely the reformed product of the original BIFs.The chlorite-quartz schist and amphogneiss are characterized by high SiO₂ and Al₂O₃ contents and exhibit variable abundances of REEs, enrichment in LREEs (light rare earth elements), negative anomalies in HFSEs (e.g., Nb, Ta, P and Ti) and positive anomalies in LILEs (large ion lithophile elements, e.g., Rb, Ba, U and K). A protolith reconstruction indicates that the protoliths of the chlorite-quartz schist are felsic volcanic rocks. SIMS and LA-ICP-MS zircon U–Pb dating indicate that this schist formed at approximately 3110 to 3101 Ma, which could represent the maximum deposition age of the Dagushan BIF. However, two groups of zircons from the amphogneiss are identified: 3104 to 3089 Ma zircons that are most likely derived from the chlorite-quartz schist and 2997 to 2995 Ma zircons, which are interpreted to represent the time of protolith crystallization. Thus, the Dagushan BIF most likely formed before 2997 to 2995 Ma. The ~ 3.1 Ga zircons yield ε_Hf(t) values of − 8.07 to 5.46, whereas the ~ 3.0 Ga zircons yield ε_Hf(t) values of − 3.96 to 2.09. These geochemical features suggest that the primitive magmas were derived from the depleted mantle with significant contributions of ancient crust.     

Algoma-type banded iron formation (BIF), Abitibi Greenstone belt,Quebec, Canada

A typical Algoma-type banded iron formation (BIF) occurs in Orvilliers, Montgolfier, and Aloigny townships in the Abitibi Greenstone belt, Quebec, Canada. The BIF is composed of millimeter to decimeter thick beds of alternating fine-grained, dark gray to black, well laminated, magnetite-rich (and/or hematite) beds and quartz–feldspar metasedimentary (graywacke) beds. The BIF is well defined by magnetic anomalies. These BIF layers are commonly associated with decimeter to meter thick horizons of metasedimentary rocks and mafic to intermediate volcanic rocks, which are locally crosscut by dikes of felsic or mafic intrusive rocks and, as well, narrow dikes of lamprophyre. The upper and lower contacts of the BIF are gradational with the adjacent graywacke. All geological units in the area are metamorphosed to the greenschist facies of regional metamorphism. Magnetite is mainly associated with subordinate amounts of hematite, quartz, Na-rich plagioclase, and muscovite. The fine-grained magnetite content is composed of 77% to 89% of the principal iron oxide minerals present. The magnetite occurs as disseminated idiomorphic to sub-idiomorphic small crystals, which average 20 μm ± 5 μm in size. Hematite is the second most abundant iron oxide mineral. Although less abundant, red jasper occurs in cherty horizons with strongly folded fragments and within fault zones. This particular Algoma-type iron formation stratigraphically extends more than 36 km along strike. It dips sub-vertically with a true width from 120 m to 600 m. The origin of the BIF is closely linked to regionally extensive submarine hydrothermal activity associated with the emplacement of volcanic and related subvolcanic rocks in an Archean greenstone belt.     

U–Pb zircon chronology,geochemistry and isotopes of the Changyi banded iron formation in the eastern Shandong Province: Constraints on BIF genesis and implications for Paleoproterozoic tectonic evolution of the North China Craton

The Changyi banded iron formation (BIF) in the eastern North China Craton (NCC) occurs within the Paleoproterozoic Fenzishan Group. The BIF shows alternating quartz-rich light and magnetite-rich dark bands with magnetite (15–65 vol.%), quartz (25–65 vol.%) and amphibole (15–30 vol.%) constituting the major minerals. Minor garnet, epidote, chlorite, calcite, biotite and pyrite occur locally. The BIF bands are interlayered with amphibolite, hornblende gneiss, biotite quartz schist, garnet biotite schist, biotite gneiss and leptynite, and are intruded by granites. LA-ICP-MS U–Pb dating on zircons separated from the BIF bands and the wallrocks constrains the depositional age as 2240–2193 Ma and metamorphic age as ~ 1864 Ma. The dominant composition of SiO₂ + Fe₂O₃^T (average value of 92.3 wt.%) of the BIF bands suggests their formation mainly through chemical precipitation. However, the widely varying contents of major elements such as Al₂O₃ (0.58–6.99 wt.%), MgO (1.00–3.86 wt.%), CaO (0.22–4.19 wt.%) and trace elements such as Rb (2.06–40.4 ppm), Sr (9.36–42.5 ppm), Zr (0.91–23.6 ppm), Hf (0.04–0.75 ppm), Cr (89.1–341 ppm), Co (2.94–30.4 ppm), and Ni (1.43–52.0 ppm) clearly indicate the incorporation of clastics, especially continental felsic clastics, as also confirmed by the presence of ancient detrital zircons in the BIF bands. When normalized against Post Archean Average Shale (PAAS), the seawater-like signatures of REE distribution patterns, such as LREE depletion, positive La and Y anomalies, and superchondritic Y/Ho ratios (average value of 36.3), support the deposition in seawater. Strong positive Eu anomalies (Eu/Eu*_PAAS = 1.14–2.86) also suggest the participation of hydrothermal fluids. In addition, the sympathetic correlation between Cr, Co and Ni as well as the Co + Ni + Cu vs. ∑ REE and the Al₂O₃ vs. SiO₂ relations further indicates that the iron and silica mainly originated from hydrothermal fluids. Combined with regional geological investigation and protolith restoration of the wallrocks, a continental rift environment is suggested for the Changyi BIF deposition. The appearance of negative Ce_PAAS anomalies might suggest the influence of the Great Oxidation Event at the time of deposition. The Changyi BIF witnessed the major Paleoproterozoic rifting–collision events in the NCC and their unique distribution in the NCC contrasts with other examples elsewhere in the world.     

The post-collisional Cihai iron skarn deposit,eastern Tianshan,Xinjiang, China

The Cihai iron skarn deposit is located in the southern part of the eastern Tianshan, Xinjiang, northwestern China. The major iron orebodies are banded and nearly parallel to each other. The iron ores are hosted in an early diabase dike and in skarn. Post-ore diabase dikes cut the iron ores and their hosting diabase. Hydrothermal activity can be divided into four stages based on geological and petrographic observations: initial K–Na alteration (stage I), skarn-minor magnetite event (II), retrograde skarn-magnetite main ore event (III), and quartz–calcite–sulfide veining (IV). Zircon U–Pb dating yields ages of 286.5 ± 1.8 Ma for early diabase and 275.8 ± 2.2 Ma for post-ore diabase dikes. Amphibole separated from massive magnetite ore gives a ⁴⁰Ar–³⁹Ar plateau age of 281.9 ± 2.2 Ma and is the time of ore formation. Formation of the Cihai iron deposit is closely related to post-collisional magmatism and associated Cu–Ni–Au polymetallic mineralization in the eastern Tianshan.     

Reprint of “Depositional environment and tectonic implications of the Paleoproterozoic BIF in Changyi area,eastern North China Craton: Evidence from geochronology and geochemistry of the metamorphic wallrocks”

The Changyi banded iron formation (BIF) in the eastern North China Craton (NCC) occurs within the Paleoproterozoic Fenzishan Group. Three types of metamorphic wallrocks interbedded with the BIF bands are identified, including plagioclase gneisses and leptynites, garnet-bearing gneisses and amphibolites. Protolith reconstruction suggests that the protoliths of the plagioclase gneisses and leptynites are mainly graywackes with minor contribution of pelitic materials, the garnet-bearing gneisses are Fe-rich pelites contaminated by clastics, and the amphibolites are tholeiitic rocks. Trace elements of La, Th, Sc and Zr of the plagioclase gneisses and leptynites and the garnet-bearing gneisses support that these meta-sedimentary rocks were probably derived from recycling of Archean rocks with felsic and mafic materials differentiated into different rock types. ²⁰⁷Pb/²⁰⁶Pb ages of detrital zircons from the meta-sedimentary rocks concentrate at 2.7–3.0 Ga, confirming their derivation from the Archean rocks. The presence of several Paleoproterozoic detrital zircons (2240 to 2246 Ma), however, also suggests minor involvement of Paleoproterozoic materials. The Archean detrital zircons have ε_Hf(t) values varying from − 0.7 to 7.6, which mainly fall between the 3.0 Ga and 3.3 Ga average crustal evolution lines on the age vs. ε_Hf(t) diagram, further illustrating that the rocks providing materials for the meta-sedimentary rocks mainly originated from partial melting of a Mesoarchean crust. This is strongly supported by their crust-like trace element distribution patterns (such as Nb, Ta, P and Ti depletion) and ancient Nd depleted mantle model ages (T_DM = 2.9–3.4 Ga). In addition, the remarkably high ε_Hf(t) values (7.5 to 9.3) of the Paleoproterozoic detrital zircons constrain the Paleoproterozoic materials to originate from a depleted mantle. The amphibolites show low SiO₂ (46.5 to 52.8 wt.%) and high MgO (5.68 to 10.9 wt.%) contents, crust-like trace element features and low ε_Nd(t) values (− 4.5 to − 0.3), suggesting that these ortho-metamorphic rocks were mainly derived from subcontinental lithospheric mantle with some contamination by Archean crustal materials. Since an intra-continental environment was required for the formation of the above metamorphic rocks, these rocks not only confine the depositional environment of the Changyi BIF to be an intra-continental rift, but also support the rifting processes of the eastern NCC during Paleoproterozoic.     

Fluid types and their genetic meaning for the BIF-hosted iron ores,Krivoy Rog,Ukraine

This paper contributes to the understanding of the genesis of epigenetic, hypogene BIF-hosted iron deposits situated in the eastern part of Ukrainian Shield. It presents new data from the Krivoy Rog iron mining district (Skelevatske–Magnetitove deposit, Frunze underground mine and Balka Severnaya Krasnaya outcrop) and focuses on the investigation of ore genesis through application of fluid inclusion petrography, microthermometry, Raman spectroscopy and baro-acoustic decrepitation of fluid inclusions. The study investigates inclusions preserved in quartz and magnetite associated with the low-grade iron ores (31–37% Fe) and iron-rich quartzites (38–45% Fe) of the Saksaganskaya Suite, as well as magnetite from the locally named high-grade iron ores (52–56% Fe). These high-grade ores resulted from alteration of iron quartzites in the Saksaganskiy thrust footwall (Saksaganskiy tectonic block) and were a precursor to supergene martite, high-grade ores (60–70% Fe). Based on the new data two stages of iron ore formation (metamorphic and metasomatic) are proposed.The metamorphic stage, resulting in formation of quartz veins within the low-grade iron ore and iron-rich quartzites, involved fluids of four different compositions: CO₂-rich, H₂O, H₂O–CO₂(± N₂–CH₄)–NaCl(± NaHCO₃) and H₂O–CO₂(± N₂–CH₄)–NaCl. The salinities of these fluids were relatively low (up to 7 mass% NaCl equiv.) as these fluids were derived from dehydration and decarbonation of the BIF rocks, however the origin of the nahcolite (NaHCO₃) remains unresolved. The minimum P–T conditions for the formation of these veins, inferred from microthermometry are T_min = 219–246 °C and P_min = 130–158 MPa. The baro-acoustic decrepitation analyses of magnetite bands indicated that the low-grade iron ore from the Skelevatske–Magnetitove deposit was metamorphosed at T = ~ 530 °C.The metasomatic stage post-dated and partially overlapped the metamorphic stage and led to the upgrade of iron quartzites to the high-grade iron ores. The genesis of these ores, which are located in the Saksaganskiy tectonic block (Saksaganskiy ore field), and the factors controlling iron ore-forming processes are highly controversial. According to the study of quartz-hosted fluid inclusions from the thrust zone the metasomatic stage involved at least three different episodes of the fluid flow, simultaneous with thrusting and deformation. During the 1^st episode three types of fluids were introduced: CO₂–CH₄–N₂(± C), CO₂(± N₂–CH₄) and low salinity H₂O–N₂–CH₄–NaCl (6.38–7.1 mass% NaCl equiv.). The 2^nd episode included expulsion of the aqueous fluids H₂O–N₂–CH₄–NaCl(± CO₂, ± C) of moderate salinities (15.22–16.76 mass% NaCl equiv.), whereas the 3^rd event involved high salinity fluids H₂O–NaCl(± C) (20–35 mass% NaCl equiv.). The fluids most probably interacted with country rocks (e.g. schists) supplying them with CH₄ and N₂. The high salinity fluids were most likely either magmatic–hydrothermal fluids derived from the Saksaganskiy igneous body or heated basinal brines, and they may have caused pervasive leaching of Fe from metavolcanic and/or the BIF rocks. The baro-acoustic decrepitation analyses of magnetite comprising the high-grade iron ore showed formation T = ~ 430–500 °C. The fluid inclusion data suggest that the upgrade to high-grade Fe ores might be a result of the Krivoy Rog BIF alteration by multiple flows of structurally controlled, metamorphic and magmatic–hydrothermal fluids or heated basinal brines.     

Petrogenesis of Dongguashan skarn-porphyry Cu-Au deposit related intrusion in the Tongling district,eastern China: Geochronological,mineralogical, geochemical and Hf isotopic evidence

The Dongguashan skarn-porphyry Cu-Au deposit, located in the Tongling district of the Middle-Lower Yangtze River Valley metallogenic belt (MLYB), consists of skarn ore bodies in the upper part and porphyry ore bodies in the lower part, both of which are hosted in quartz diorite and quartz monzodiorite. Zircon U-Pb age and geochemical studies show that the quartz diorite of the Dongguashan intrusion formed at 140.3 ± 2.0 Ma (MSWD = 0.19) and belongs to the high potassium calc-alkaline series. It is enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE), depleted in high field-strength elements (HFSE) and heavy rare earth elements (HREE), and has a slightly negative Eu anomaly. ¹⁷⁶Hf/¹⁷⁷Hf values of the rims of zircons show a variable range (0.282087–0.282391), corresponding with calculated ε_Hf(t) values of − 10.72 to − 21.46. Plagioclases in the quartz diorite have unbalanced structure characterized by bright andesine and labradorite (An = 37.0–65.5) cores with higher contents of Fe and Sr and are corroded by dark oligoclase (An = 13.8–27.6) rim. Major elements, trace elements, Hf isotope, and the composition of plagioclases indicate that the parental magma of the Dongguashan intrusion was produced by the mixing of underplating mafic magma and felsic magma formed by remelting of Paleoproterozoic and Neoarchean crustal rocks, Neoproterozoic crust may also provide some material to the felsic magma. Mafic magma played a key role and made the parental magma rich in water, sulfur, metals (Cu, Au) and gave it a high oxygen fugacity. During its magmatic evolution, the parental magma underwent fractional crystallization of hornblende, apatite, sphene and other mafic minerals. Some quartz diorite and quartz monzodiorite samples that show adakitic signatures, may result from injection of mafic magma. Some inherited zircons of the quartz diorite in the Dongguashan intrusion gave ages of 2.40–2.50 Ga, 1.95–2.05 Ga and 0.74–0.81 Ga, coming from ultramafic, mafic and andesitic igneous rocks, and this indicates that there may have been three periods (2.4, 2.0, and 0.8 Ga) of magmatic activity in the Tongling district.     

Petrography and geochemistry of the Shilu Fe–Co–Cu ore district,South China: Implications for the origin of a Neoproterozoic BIF system

The Shilu Fe–Co–Cu ore district is situated in the western Hainan Province of south China. This district consists of the upper Fe-rich layers and the lower Co–Cu ores, which are mainly hosted within the Neoproterozoic Shilu Group, a dominantly submarine siliciclastic and carbonate sedimentary succession that generally has been metamorphosed to greenschist facies. Three facies of metamorphosed BIFs, the oxide, the silicate–oxide and the sulfide–carbonate–silicate, have been identified within the Shilu Group. The oxide banded iron formation (BIF) facies (quartz itabirites or Fe-rich ores) consists of alternating hematite-rich and quartz-rich microbands. The silicate–oxide BIF facies (amphibolitic itabirites or Fe-poor ores) comprises alternating millimeter to tens of meter scale, magnetite–hematite-rich bands with calc-silicate-rich macro- to microbands. The sulfide–carbonate–silicate BIF facies (Co–Cu ores) contain alternating cobaltiferous pyrite, cobaltiferous pyrrhotite and chalcopyrite macrobands to microbands mainly with dolomite–calcite, but also with minor sericite–quartz bands. Blasto-oolitic, pelletoidal, colloidal, psammitic, and cryptocrystalline to microcrystalline textures, and blasto-bedding structures, which likely represent primary sedimentation, are often observed in the Shilu BIF facies.The Shilu BIFs and interbedded host rocks are generally characterized by relatively low but variable ∑ REE concentrations, LREE depletion and/or MREE enrichment relative to HREE, and no Ce, Gd and Eu anomalies to strongly positive Ce, Gd and Eu anomalies in the upward-convex PAAS-normalized REY patterns, except for both the banded or impure dolostones with nil Ce anomaly to negative Ce anomalies and negative La anomalies, and the minor sulfide–carbonate–silicate BIF facies with moderately negative Eu anomalies. They also contain relatively low but variable HFSE abundances as Zr, Nb, Hf, Th and Ti, and relatively high but variable abundances of Cu, Co, Ni, Pb, As, Mn and Ba. The consistently negative ε_Nd(t) values range from − 4.8 to − 8.5, with a T_DM age of ca. 2.0 Ga. In line with the covariations between Al₂O₃ and TiO₂, Fe₂O₃ + FeO and SiO₂, Mn and Fe, Zr and Y/Ho and REE, and Sc and LREE, the geochemical and Sm–Nd isotopic features suggest that the precursors to the Shilu BIFs formed from a source dominated by seafloor-derived, high- to low temperature, acidic and reducing hydrothermal fluids but with variable input of detrital components in a seawater environment. Moreover, the involved detrital materials were sourced dominantly from an unknown, Paleoproterozoic or older crust, with lesser involvement from the Paleo- to Mesoproterozoic Baoban Group underlying the Shilu Group.The Shilu BIFs of various facies are interpreted to have formed in a shallow marine, restricted or sheltered basin near the rifted continental margin most likely associated with the break-up of Rodinia as the result of mantle superplume activity in South China. The seafloor-derived, periodically upwelling metalliferous hydrothermal plume/vent fluids under anoxic but sulfidic to anoxic but Fe^2 +-rich conditions were removed from the plume/vent and accumulated in the basin, and then variably mixed with terrigenous detrital components, which finally led to rhythmic deposition of the Shilu BIFs.     

Petrography and geochemistry of the Mesoarchean Bikoula banded iron formation in the Ntem complex (Congo craton), Southern Cameroon: Implications for its origin

Precambrian banded iron formations (BIFs) represent an important source of mineable iron, as well as an archive recording secular changes in the chemistry of the Earth’s early oceans. Here we report petrographic and geochemical characteristics of unweathered drill core samples from the Bikoula BIF, a virtually uncharacterized oxide facies iron formation, hosted in the Mesoarchean Ntem complex, southern Cameroon. The BIF is cross-cut with syenitic veins. The entire succession is highly deformed and metamorphosed under granulite facies conditions. The BIF is characterized by alternating micro-bands of magnetite, quartz and pyroxene. Sulfides (pyrite, pyrrhotite, and chalcopyrite), oligoclase, ferro-pargasite, biotite and ilmenite occur as minor phases. The presence of pyroxene, ferro-pargasite and oligoclase, relatively high contents of major elements such as Al₂O₃ (0.76–7.52 wt.%), CaO (1.95–4.90 wt.%), MgO (3.78–5.59 wt.%), as well as positive correlations among Al₂O₃, TiO₂, HFSEs, LILEs and transition metals (V, Cr, Ni, Cu and Zn), suggest that the BIF protolith included a significant amount of clastic material. Several samples have preserved seawater-like PAAS-normalized REE-Y patterns, including LREE depletion, and positive La and Y anomalies. Positive Eu anomalies observed in some of the analyzed samples indicate influx of hydrothermal fluids (possibly including Fe and Si) within the basin where the BIF precipitated. However, few samples show unusual negative Eu anomalies that likely result from a large proportion of clastic contamination. The lack of Ce anomalies suggests that the Bikoula BIF was deposited in a basin that was (at least partly) anoxic or suboxic, where it was possible to transport and concentrate dissolved Fe²⁺.     

BIF-hosted iron mineral system: A review

The BIF-hosted iron ore system represents the world's largest and highest grade iron ore districts and deposits. BIF, the precursor to low- and high-grade BIF hosted iron ore, consists of Archean and Paleoproterozoic Algoma-type BIF (e.g., Serra Norte iron ore district in the Carajás Mineral Province), Proterozoic Lake Superior-type BIF (e.g., deposits in the Hamersley Province and craton), and Neoproterozoic Rapitan-type BIF (e.g., the Urucum iron ore district).The BIF-hosted iron ore system is structurally controlled, mostly via km-scale normal and strike-slips fault systems, which allow large volumes of ascending and descending hydrothermal fluids to circulate during Archean or Proterozoic deformation or early extensional events. Structures are also (passively) accessed via downward flowing supergene fluids during Cenozoic times.At the depositional site the transformation of BIF to low- and high-grade iron ore is controlled by: (1) structural permeability, (2) hypogene alteration caused by ascending deep fluids (largely magmatic or basinal brines), and descending ancient meteoric water, and (3) supergene enrichment via weathering processes. Hematite- and magnetite-based iron ores include a combination of microplaty hematite–martite, microplaty hematite with little or no goethite, martite–goethite, granoblastic hematite, specular hematite and magnetite, magnetite–martite, magnetite-specular hematite and magnetite–amphibole, respectively. Goethite ores with variable amounts of hematite and magnetite are mainly encountered in the weathering zone.In most large deposits, three major hypogene and one supergene ore stages are observed: (1) silica leaching and formation of magnetite and locally carbonate, (2) oxidation of magnetite to hematite (martitisation), further dissolution of quartz and formation of carbonate, (3) further martitisation, replacement of Fe silicates by hematite, new microplaty hematite and specular hematite formation and dissolution of carbonates, and (4) replacement of magnetite and any remaining carbonate by goethite and magnetite and formation of fibrous quartz and clay minerals.Hypogene alteration of BIF and surrounding country rocks is characterised by: (1) changes in the oxide mineralogy and textures, (2) development of distinct vertical and lateral distal, intermediate and proximal alteration zones defined by distinct oxide–silicate–carbonate assemblages, and (3) mass negative reactions such as de-silicification and de-carbonatisation, which significantly increase the porosity of high-grade iron ore, or lead to volume reduction by textural collapse or layer-compaction. Supergene alteration, up to depths of 200 m, is characterised by leaching of hypogene silica and carbonates, and dissolution precipitation of the iron oxyhydroxides.Carbonates in ore stages 2 and 3 are sourced from external fluids with respect to BIF. In the case of basin-related deposits, carbon is interpreted to be derived from deposits underlying carbonate sequences, whereas in the case of greenstone belt deposits carbonate is interpreted to be of magmatic origin. There is only limited mass balance analyses conducted, but those provide evidence for variable mobilization of Fe and depletion of SiO₂. In the high-grade ore zone a volume reduction of up to 25% is observed.Mass balance calculations for proximal alteration zones in mafic wall rocks relative to least altered examples at Beebyn display enrichment in LOI, F, MgO, Ni, Fe₂O_3total, C, Zn, Cr and P₂O₅ and depletions of CaO, S, K₂O, Rb, Ba, Sr and Na₂O. The Y/Ho and Sm/Yb ratios of mineralised BIF at Windarling and Koolyanobbing reflect distinct carbonate generations derived from substantial fluid–rock reactions between hydrothermal fluids and igneous country rocks, and a chemical carbonate-inheritance preserved in supergene goethite.Hypogene and supergene fluids are paramount for the formation of high-grade BIF-hosted iron ore because of the enormous amount of: (1) warm (100–200 °C) silica-undersaturated alkaline fluids necessary to dissolve quartz in BIF, (2) oxidized fluids that cause the oxidation of magnetite to hematite, (3) weakly acid (with moderate CO₂ content) to alkaline fluids that are necessary to form widespread metasomatic carbonate, (4) carbonate-undersaturated fluids that dissolve the diagenetic and metasomatic carbonates, and (5) oxidized fluids to form hematite species in the hypogene- and supergene-enriched zone and hydroxides in the supergene zone.Four discrete end-member models for Archean and Proterozoic hypogene and supergene-only BIF hosted iron ore are proposed: (1) granite–greenstone belt hosted, strike-slip fault zone controlled Carajás-type model, sourced by early magmatic (± metamorphic) fluids and ancient “warm” meteoric water; (2) sedimentary basin, normal fault zone controlled Hamersley-type model, sourced by early basinal (± evaporitic) brines and ancient “warm” meteoric water. A variation of the latter is the metamorphosed basin model, where BIF (ore) is significantly metamorphosed and deformed during distinct orogenic events (e.g., deposits in the Quadrilátero Ferrífero and Simandou Range). It is during the orogenic event that the upgrade of BIF to medium- and high-grade hypogene iron took place; (3) sedimentary basin hosted, early graben structure controlled Urucum-type model, where glaciomarine BIF and subsequent diagenesis to very low-grade metamorphism is responsible for variable gangue leaching and hematite mineralisation. All of these hypogene iron ore models do not preclude a stage of supergene modification, including iron hydroxide mineralisation, phosphorous, and additional gangue leaching during substantial weathering in ancient or Recent times; and (4) supergene enriched BIF Capanema-type model, which comprises goethitic iron ore deposits with no evidence for deep hypogene roots. A variation of this model is ancient supergene iron ores of the Sishen-type, where blocks of BIF slumped into underlying karstic carbonate units and subsequently experienced Fe upgrade during deep lateritic weathering.     

Evolution and provenance of Neoproterozoic basement and Lower Paleozoic siliciclastic cover of the Menderes Massif (western Taurides): Coupled U–Pb–Hf zircon isotope geochemistry

In the Menderes Massif (western Taurides) a Neoproterozoic basement comprising metasediments and intrusive granites is imbricated between Paleozoic platform sediments. U–Pb–Hf zircon analyses of Menderes rock units were performed by us using LA-ICP-MS. The U–Pb detrital zircon signal of the Neoproterozoic metasediments is largely consistent with a NE African (Gondwana) provenance. The oldest unit, a paragneiss, contains significant amounts (~ 30%) of Archean-aged zircons and εHf (t) values of about a half of its Neoproterozoic zircons are negative suggesting contribution from Pan-African terranes dominated by reworking of an old crust. In the overlying, mineralogically-immature Core schist (which is still Neoproterozoic), the majority of the detrital zircons are Neoproterozoic, portraying positive εHf (t) values indicating derivation from a proximal juvenile source, resembling the Arabian–Nubian Shield.The period of sedimentation of the analyzed metasediments, is constrained between 570 and 550 Ma (Late Ediacaran). The Core schist sediments, ~ 9 km thick, accumulated in less than 20 My implying a tectonic-controlled sedimentary basin evolved adjacent to the eroded juvenile terrane. Granites, now orthogneisses, intruded the basin fill at 550 Ma, they exhibit ± 0 εHf (t = 550 Ma) and T_DM ages of 1.4 Ga consistent with anatexis of various admixtures of juvenile Neoproterozoic and Late Archean detrital components. Granites in the northern Arabian–Nubian Shield are no younger than 580 Ma and their εHf (t) are usually more positive. This implies that the Menderes does not represent a straightforward continuation of the Arabian–Nubian Shield.The lower part of the pre-Carboniferous silisiclastic cover of the Menderes basement, comprises a yellowish quartzite whose U–Pb–Hf detrital zircon signal resembles that of far-traveled Ordovician sandstones in Jordan (including 0.9–1.1 Ga detrital zircons), supporting pre-Triassic paleorestorations placing the Tauride with Afro-Arabia. The detrital signal of the overlying carbonate-bearing quartzitic sequence indicates contribution from a different source: the majority of its detrital zircons yielded 550 Ma and ± 0 εHf (t = 550 Ma) values identical to that of the underlying granitic gneiss implying exposure of Menderes-like granites in the provenance.260–250 Ma lead-loss and partial resetting of the U–Pb system of certain zircons in both basement and cover units was detected. It is interpreted as a consequence of a Permian–Early Triassic thermal event preceding known Triassic granitoid intrusions.     

华北克拉通前寒武纪BIF铁矿研究:进展与问题

研究表明,BIF铁矿在华北克拉通的分布具有一定规律性.大规模BIF铁矿主要发育在绿岩带分布区的鞍山-本溪、冀东、霍邱-舞阳、五台、鲁西和固阳等地;华北克拉通时代最古老的BIF形成于古太古代,最年轻BIF形成于古元古代早期,但BIF铁矿的峰期为新太古代晚期(2.52 ～2.56Ga);BIF铁矿类型可划分为阿尔戈马型和苏比利尔湖型两类,但华北以晚太古代绿岩带中的阿尔戈马型为主,仅吕梁的古元古代袁家村铁矿具典型苏比利尔湖型铁矿特征.根据BIF在绿岩带序列中的产出部位和岩石组合关系,可将华北BIF划分为:1)斜长角闪岩(夹角闪斜长片麻岩)-磁铁石英岩组合;2)斜长角闪岩-黑云变粒岩-云母石英片岩-磁铁石英岩组合;3)黑云变粒岩(夹黑云石英片岩)-磁铁石英岩组合;4)黑云变粒岩-绢云绿泥片岩-黑云石英片岩-磁铁石英岩组合;5)斜长角闪岩(片麻岩)-大理岩-磁铁石英岩组合等5种类型.华北克拉通BIF形成时代与早前寒武纪岩浆活动的时间基本一致(2.5～2.6Ga),但与华北克拉通陆壳增生的峰期(2.7～2.9Ga)有一定偏差,其原因可能与新太古代晚期华北克拉通构造-热事件十分强烈有关.华北克拉通新太古代BIF大多形成于岛弧环境,但局部地区(如固阳)BIF铁矿可能形成于深部有地幔柱叠加的岛弧环境.华北克拉通BIF富矿主要有三种类型:原始沉积、受后期构造-热液叠加改造和古风化壳等,但总体不发育富铁矿,国外发育的风化壳型富铁在我国甚为少见.本文认为在探讨BIF铁矿类型时,需要从绿岩带发育序列进行综合判别.阿尔戈马型铁矿一般产于克拉通基底(绿岩带)环境,苏比利尔湖型铁矿一般形成于稳定克拉通上的海相沉积盆地或被动大陆边缘.华北克拉通BIF铁矿地球化学研究结果表明,BIF铁矿无Ce负异常且Fe同位素为正值,从而暗示铁矿沉淀的环境为低氧或缺氧环境,而铕正异常可能指示BIFs为热水沉积成因,其机制可能为海水对流循环从新生镁铁质-超镁铁质洋壳中淋滤出F(e)和Si等元素,在海底排泄沉淀成矿,而条带状构造的形成可能归咎于成矿流体的脉动式喷溢.但对于BIF铁矿的物质来源、成矿条件和机制、富铁矿成因、华北克拉通不发育苏比利尔湖型铁矿的原因等方面,仍需深入研究.     

In-situ LA-ICP-MS trace elemental analyses of magnetite: The Bayan Obo Fe-REE-Nb deposit,North China

The Bayan Obo Fe-REE-Nb deposit in northern China is the world's largest light REE deposit, and also contains considerable amounts of iron and niobium metals. Although there are numerous studies on the REE mineralization, the origin of the Fe mineralization is not well known. Laser ablation (LA) ICP-MS is used to obtain trace elements of Fe oxides in order to better understand the process involved in the formation of magnetite and hematite associated with the formation of the giant REE deposit. There are banded, disseminated and massive Fe ores with variable amounts of magnetite and hematite at Bayan Obo. Magnetite and hematite from the same ores show similar REE patterns and have similar Mg, Ti, V, Mn, Co, Ni, Zn, Ga, Sn, and Ba contents, indicating a similar origin. Magnetite grains from the banded ores have Al + Mn and Ti + V contents similar to those of banded iron formations (BIF), whereas those from the disseminated and massive ores have Al + Mn and Ti + V contents similar to those of skarn deposits and other types of magmatic-hydrothermal deposits. Magnetite grains from the banded ores with a major gangue mineral of barite have the highest REE contents and show slight moderate REE enrichment, whereas those from other types of ores show light REE enrichment, indicating two stages of REE mineralization associated with Fe mineralization. The Bayan Obo deposit had multiple sources for Fe and REEs. It is likely that sedimentary carbonates provided original REEs and were metasomatized by REE-rich hydrothermal fluids to form the giant REE deposit.     

Geochemistry and origin of the Neoproterozoic Dahongliutan banded iron formation (BIF) in the Western Kunlun orogenic belt,Xinjiang (NW China)

The Neoproterozoic (593–532 Ma) Dahongliutan banded iron formation (BIF), located in the Tianshuihai terrane (Western Kunlun orogenic belt), is hosted in the Tianshuihai Group, a dominantly submarine siliciclastic and carbonate sedimentary succession that generally has been metamorphosed to greenschist facies. Iron oxide (hematite), carbonate (siderite, ankerite, dolomite and calcite) and silicate (muscovite) facies are all present within the iron-rich layers. There are three distinctive sedimentary facies BIFs, the oxide, silicate–carbonate–oxide and carbonate (being subdivided into ankerite and siderite facies BIFs) in the Dahongliutan BIF. They demonstrate lateral and vertical zonation from south to north and from bottom to top: the carbonate facies BIF through a majority of the oxide facies BIF into the silicate–carbonate–oxide facies BIF and a small proportion of the oxide facies BIF.The positive correlations between Al₂O₃ and TiO₂, Sc, V, Cr, Rb, Cs, Th and ∑REE (total rare earth element) for various facies of BIFs indicate these chemical sediments incorporate terrigenous detrital components. Low contents of Al₂O₃ (<3 wt%), TiO₂ (<0.15 wt%), ∑REE (5.06–39.6 ppm) and incompatible HFSEs (high field strength elements, e.g., Zr, Hf, Th and Sc) (<10 ppm), and high Fe/Ti ratios (254–4115) for a majority of the oxide and carbonate facies BIFs suggest a small clastic input (<20% clastic materials) admixtured with their original chemical precipitates. The higher abundances of Al₂O₃ (>3 wt%), TiO₂, Zr, Th, Cs, Sc, Cr and ∑REE (31.2–62.9 ppm), and low Fe/Ti ratios (95.2–236) of the silicate–carbonate–oxide facies BIF are consistent with incorporation of higher amounts of clastic components (20%–40% clastic materials). The HREE (heavy rare earth element) enrichment pattern in PAAS-normalized REE diagrams exhibited by a majority of the oxide and carbonate facies BIFs shows a modern seawater REE signature overprinted by high-T (temperature) hydrothermal fluids marked by strong positive Eu anomalies (Eu/Eu¹_PAAS = 2.37–5.23). The low Eu/Sm ratios, small positive Eu anomaly (Eu/Eu¹_PAAS = 1.10–1.58) and slightly MREE (middle rare earth element) enrichment relative to HREE in the silicate–carbonate–oxide facies BIF and some oxide and carbonate facies BIFs indicate higher contributions from low-T hydrothermal sources. The absence of negative Ce anomalies and the high Fe³⁺/(Fe³⁺/Fe²⁺) ratios (0.98–1.00) for the oxide and silicate–carbonate–oxide BIFs do not support ocean anoxia. The δ¹³C_V-PDB (−4.0‰ to −6.6‰) and δ¹⁸O_V-PDB (−14.0‰ to −11.5‰) values for siderite and ankerite in the carbonate facies BIF are, on average, ∼6‰ and ∼5‰ lower than those (δ¹³C_V-PDB = −0.8‰ to + 3.1‰ and δ¹⁸O_V-PDB = −8.2‰ to −6.3‰) of Ca–Mg carbonates from the silicate–carbonate–oxide facies BIF. This feature, coupled with the negative correlations between FeO, Eu/Eu¹_PAAS and δ¹³C_V-PDB, imply that a water column stratified with regard to the isotopic omposition of total dissolved CO₂, with the deeper water, from which the carbonate facies BIF formed, depleted in δ¹³C that may have been derive from hydrothermal activity.Integration of petrographic, geochemical, and isotopic data indicates that the silicate–carbonate–oxide facies BIF and part of the oxide facies BIF precipitated in a near-shore, oxic and shallow water environment, whereas a majority of the oxide and carbonate facies BIFs deposited in anoxic but Fe²⁺-rich deeper waters, closer to submarine hydrothermal vents. High-T hydrothermal solutions, with infusions of some low-T hydrothermal fluids, brought Fe and Si onto a shallow marine, variably mixed with detrital components from seawaters and fresh waters carrying continental landmass and finally led to the alternating deposition of the Dahongliutan BIF during regression–transgression cycles.The Dahongliutan BIF is more akin to Superior-type rather than Algoma-type and Rapitan-type BIF, and constitutes an additional line of evidence for the widespread return of BIFs in the Cryogenian and Ediacaran reflecting the recurrence of anoxic ferruginous deep sea and anoxia/reoxygenation cycles in the Neoproterozoic. In combination with previous studies on other Fe deposits in the Tianshuihai terrane, we propose that a Fe²⁺-rich anoxic basin or deep sea probably existed from the Neoproterozoic to the Early Cambrian in this area.     

Changes of Ge/Si,REE + Y and SmNd isotopes in alternating Fe- and Si-rich mesobands reveal source heterogeneity of the ~ 2.54 Ga Sijiaying banded iron formation in Eastern Hebei,China

The North China Craton (NCC) is one of the most important regions hosting abundant banded iron formations (BIFs). The ~ 2.54 Ga Sijiaying BIF, the best-preserved and most extensive deposit in Eastern Hebei, is intercalated and closely associated with meta-volcanic rocks of the Luanxian Group. In this context, major and trace element and SmNd isotopic analyses of individual mesobands of a Sijiaying BIF specimen were conducted to characterize the source and depositional environment over a transient period.Low Al₂O₃, TiO₂ and high field strength elements (HFSEs) concentrations show that the BIF is relatively detritus-free. Shale-normalized rare earth and yttrium distributions (REE + Y) of individual BIF mesobands exhibit positive La anomalies, enrichment in HREE relative to LREE and MREE and suprachondritic Y/Ho ratios, which are typical features of marine waters throughout the Archean and Proterozoic. The presence of consistently positive Eu anomalies indicates a significant high-T hydrothermal input, while the absence of true Ce anomalies suggests deposition from an anoxic water column. By comparison with other typical BIFs (e.g., the Isua BIF from Greenland; the Kuruman BIF from South Africa), the Sijiaying BIF is depleted in HREE, and appears to record variations in solute fluxes related to changing intensities of hydrothermal activity. These features, coupled with SmNd isotopic relations and Ge/Si distributional patterns, point to two decoupled sources controlling the depositional environment of the BIF and thus reveal source heterogeneity for silica and iron of the Sijiaying BIF. High Fe fluxes were associated with seafloor-vented hydrothermal fluids, which received their SmNd isotopic signature from alteration of depleted oceanic crust; whereas significant amounts of silica were associated with ambient seawater whose REE signature was controlled by solutes derived from weathering of nearby Mesoarchean continental landmasses. The old (up to ~ 3.0 Ga) Nd (T_DM) model ages of Si-rich mesobands of the BIF support such a scenario.     

Formation and evolution of Precambrian continental lithosphere in South China

An overview is presented for the formation and evolution of Precambrian continental lithosphere in South China. This is primarily based on an integrated study of zircon U–Pb ages and Lu–Hf isotopes in crustal rocks, with additional constraints from Re–Os isotopes in mantle-derived rocks. Available Re–Os isotope data on xenolith peridotites suggest that the oldest subcontinental lithospheric mantle beneath South China is primarily of Paleoproterozoic age. The zircon U–Pb ages and Lu–Hf isotope studies reveal growth and reworking of the juvenile crust at different ages. Both the Yangtze and Cathaysia terranes contain crustal materials of Archean U–Pb ages. Nevertheless, zircon U–Pb ages exhibit two peaks at 2.9–3.0 Ga and ~ 2.5 Ga in Yangtze but only one peak at ~ 2.5 Ga in Cathaysia. Both massive rocks and crustal remnants (i.e., zircon) of Archean U–Pb ages occur in Yangtze, but only crustal remnants of Archean U–Pb ages occur in Cathaysia. Zircon U–Pb and Lu–Hf isotopes in the Kongling complex of Yangtze suggest the earliest episode of crustal growth in the Paleoarchean and two episodes of crustal reworking at 3.1–3.3 Ga and 2.8–3.0 Ga. Both negative and positive ε_Hf(t) values are associated with Archean U–Pb ages of zircon in South China, indicating both the growth of juvenile crust and the reworking of ancient crust in the Archean. Paleoproterozoic rocks in Yangtze exhibit four groups of U–Pb ages at 2.1 Ga, 1.9–2.0 Ga, ~ 1.85 Ga and ~ 1.7 Ga, respectively. They are associated not only with reworking of the ancient Archean crust in the interior of Yangtze, but also with the growth of the contemporaneous juvenile crust in the periphery of Yangtze. In contrast, Paleoproterozoic rocks in Cathaysia were primarily derived from reworking of Archean crust at 1.8–1.9 Ga. The exposure of Mesoproterozoic rocks are very limited in South China, but zircon Hf model ages suggest the growth of juvenile crust in this period due to island arc magmatism of the Grenvillian oceanic subduction. Magmatic rocks of middle Neoproterozoic U–Pb ages are widespread in South China, exhibiting two peaks at about 830–800 Ma and 780–740 Ma, respectively. Both negative and positive ε_Hf(t) values are associated with the middle Neoproterozoic U–Pb ages of zircon, suggesting not only growth and reworking of the juvenile Mesoproterozoic crust but also reworking of the ancient Archean and Paleoproterozoic crust in the middle Neoproterozoic. The tectonic setting for this period of magmatism would be transformed from arc–continent collision to continental rifting with reference to the plate tectonic regime in South China.     

Geochronology and geochemical characteristics of the Dongping ore-bearing granite,North China: Sources and implications for its tectonic setting

The Dongping gold deposit, located in Chongli County (Hebei Province) about 200 km northwest of Beijing, is one of the largest gold-producing areas along the northern margin of the North China Craton. It is located in the of Shuiquangou alkaline igneous complex of Middle Devonian age (394.3 ± 3.2 Ma), composed chiefly of highly alkaline syentite and quartz syenites. This study reveals the age of the Carboniferous in the deposit at 351.7 ± 2.8 Ma (MSWD = 1.9). The Dongping deposit is locally hosted in Cretaceous (~143 ± 1 Ma) alkali granites that intruded the older and the gold mineralization is closely associated genetically with this event. Hydrothermal zircons in the alkali granites have Th/U ratios mostly ranging between 0.01 and 0.7 indicating oscillatory zoning. A few grains with high Th/U ratios (1.31–2.07) may be from metamorphic domains. Negative εHf(t) values of the zircon mainly range between −19.75 and −16.93, suggesting that they originated principally by the melting of recycled continental crust. Less abundant zircons with εHf(t) ranging from −25.76 to −23.46, with Hf model ages (T_DM2) of 2.54 to 2.67 Ga, (mainly 2.2 to 2.3 Ga) suggest that recycled Neoarchean basement was also present in the source region. The Devonian syenites and quartz syenites have T_DM1 ages ranging from 1.96 to 2.08 Ga. Zircons from these rocks have εHf(t) values of −11.9 to −18.9. Certain zircons from the gold-bearing granite of Paleozoic age have an initial ¹⁷⁶Hf/¹⁷⁷Hf ratio of 0.281816 to 0.282058 and 0.282147 to 0.282348, reflecting a homogenous distribution of hafnium isotopes typical of magmatic sources. The T_DM1 and T_DM2 of the latest intrusion varying 1.33 to 1.59 Ga and 1.72 to 2.11 Ga respectively, indicating that the Neoproterozoic to Mesoproterozoic rocks of this area are an important source for the younger magma which are important to forming ore deposits. The TDM₂ indicate that the magma may be derived from a very old crustal basement (~2.67 Ga) in the northern margin of North China Craton by partial melting.     

Microplaty hematite ore in the Yilgarn Province of Western Australia: The geology and genesis of the Wiluna West iron ore deposits

The Wiluna West small (~ 130 Mt) high-grade bedded hematite ore deposits, consisting of anhedral hematite mesobands interbedded with porous layers of acicular hematite, show similar textural and mineralogical properties to the premium high-grade low-phosphorous direct-shipping ore from Pilbara sites such as Mt Tom Price, Mt Whaleback, etc., in the Hamersley Province and Goldsworthy, Shay Gap and Yarrie on the northern margin of the Pilbara craton. Both margins of the Pilbara Craton and the northern margin of the Yilgarn craton were subjected to sub-aerial erosion in the Paleoproterozoic era followed by marine transgressions but unlike the Hamersley Basin, the JFGB was covered by comparatively thin epeirogenic sediments and not subjected to Proterozoic deformation or burial metamorphism. The Joyner's Find greenstone belt (JFGB) in the Yilgarn region of Western Australia was exhumed by middle to late Cenozoic erosion of a cover of unmetamorphosed and relatively undeformed Paleoproterozoic epeirogenic sedimentary rocks that preserved the JFGB unaltered for nearly 2 Ga; thus providing a unique snapshot of the early Proterozoic environment.Acicular hematite, pseudomorphous after acicular iron silicate, is only found in iron ore and BIF that was exposed to subaerial deep-weathering in early Paleoproterozoic times (pre 2.2 Ga) and in the overlying unconformable Paleoproterozoic conglomerate derived from these rocks and is absent from unweathered rocks (Lascelles, 2002). High-grade ore and BIF weathered during later subaerial erosion cycles contain anhedral hematite and acicular pseudomorphous goethite. The acicular hematite was formed from goethite pseudomorphs of silicate minerals by dehydration in the vadose zone under extreme aridity during early Paleoproterozoic subaerial weathering.The principal high-grade hematite deposits at Wiluna West are interpreted as bedded ore bodies that formed from BIF by loss of chert bands during diagenesis and have been locally enriched to massive hematite by the introduction of hydrothermal specular hematite. No trace of chert bands are present in the deep saprolitic hematite and hematite–goethite ore in direct contrast to shallow supergene ore in which the trace of chert bands is clearly defined by goethite replacement, voids and detrital fill. Abundant hydrothermal microplaty hematite at Wiluna West is readily distinguished by its crystallinity.The genesis of the premium ore from the Pilbara Region has been much discussed in the literature and the discovery at Wiluna West provides a unique opportunity to compare the features that are common to both districts and to test genetic models.