Structural architecture and a new tectonic perspective of Ovda Regio, Venus

The structural architecture of the Ovda Regio, Venus, derived from regional and detailed structural mapping of several key segments, reveals a new tectonic perspective, for the first time that varies from most of the existing tectonic models. The interpreted structural features include folds of different styles and scales, mega shear zones, ribbon structures, and other kinematic indicators. While concentric folding is predominant in the western Ovda, the eastern Ovda is characterized by shear folding. Two mega shear zones are recognised: dextral NW-SE trending GMSZ and a complimentary sinistral NE-SW trending KKSZ. Two tectonic stages are identified in a coherent and continuous strain history involving initial N-S compression that gave rise to regional east-west folding providing the fundamental tectonic architecture of a mountain fold-thrust belt. Ribbon structures in a broad radial pattern were developed contemporaneously with this folding. The second tectonic stage saw the development of a conjugate pair of mega shear zones and a range of kinematic indicators, consistent with continued N-S compression and the pre-existing fold pattern was modified resulting in the development of new fold structures, particularly in the eastern Ovda. The structural characteristics of Ovda Regio are analogous to those of Himalaya-Tibet collision front and also the Precambrian mobile belts of southern India.     

Tectonic evolution of Ovda Regio: An example of highly deformed continental crust on Venus?

A detailed structural analysis of several selected areas of Ovda Regio provides evidence of a complex tectonic evolution. We have reported thrusting in the marginal fold belts indicating together with the presence of short-wavelength folds a significant amount of shortening. Extensional tectonics postdate at least in some locations contraction, while the contrary was not observed. Both contraction and extension occur on a complex layered crust yielding contemporary structures of different wavelengths. The thrust and fold belts of the plateau margins are characterized by concentric contraction followed by concentric contraction with perpendicular extension and finally radial extension. Deformation in the thrust and fold belts of Ovda margins is gradually transmitted to the external plains. A complex tectonic history has been revealed in the internal area of Ovda, basically characterized by contraction in different directions generating basin and dome interference at different wavelengths. Small amounts of a non-coaxial component of deformation have been observed both in the margins and in the central area of the plateau. All the reported observations can be explained if Ovda Regio is a continent that survived a global subduction event.     

Crustal tectonic zone on Venus

Various tectonic structures to the south and southeast of Ishtar Terra indicate areal stresses. Compression from east-southeast against Ishtar Terra has resulted in ridge belt formation and surface bending at Salme Dorsa, probably along the seam between two crustal units. En echelon fault zone indicates dextral strike-slip shear(s) resulted in the westward movement of planitia crust related to Ishtar Terra. Meshkenet Tessera displays differential dextral strike-slip faulting where the southernmost bar-like blocks have had largest relative movements. Compression against Tusholi Corona has resulted in foreland surface bending similar to that of Salme Dorsa. The tectonic zone as a whole resembles a dextral transform fault extending from a concave arc in the west to another concave arc in the east. The Cytherean surface, crust or uppermost lithosphere seems to be able to transmit stresses over distances. Deeper understanding of these processes is needed to gain a new idea of the crustal deformation on terrestrial planets.     

A hit-and-run giant impact scenario

The formation of the Moon from the debris of a slow and grazing giant impact of a Mars-sized impactor on the proto-Earth (Cameron and Ward [1976]. Lunar Planet. Sci. Conf.; Canup and Asphaug [2001]. Nature 412, 708) is widely accepted today. We present an alternative scenario with a hit-and-run collision (Asphaug [2010]. Chem. Erde 70, 199) with a fractionally increased impact velocity and a steeper impact angle.     

Tectonic Evolution of Eastern Ishtar Terra,Venus

The complex morphology and topography of Eastern Ishtar Terra have been interpreted as due to tectonic deformation. Models proposed to account for this deformation include: crustal flow through asthenospheric flow and thermal-gravitational sliding; rifting, gravity spreading, and fold belt formation; and horizontal convergence and crustal thickening. In this study we map the detailed structural and topographic fabric of this region in order to explore and test these hypotheses. Eastern Ishtar can be divided into four major provinces: Maxwell Montes/Western Fortuna Tessera, a high plateau and mountain belt dominated by long NNW trending ridges; Central Fortuna Tessera, a low region of orthogonally oriented short WNW trending ridges and long, NNE trending troughs; Eastern Fortuna Tessera, a broad, E-W trending topographic rise characterized by ENE trending troughs and a complex pattern of intersecting ridges; and Northern Fortuna Tessera, a region of steep, NE-facing topographic scarps and ridges that trend WNW. On the basis of structural and topographic relationships, the features within these provinces are found to be inconsistent with a formation through either downslope crustal flow or rifting. We find that the mapped features are most consistent with a formation through convergence, collison, and underthrusting of thickened crustal terranes. These terranes are suggested to have been created through processes of seafloor-type spreading and crustal collision. Based on relationships between the different terranes, several accretional events are proposed in which Eastern Ishtar is produced by the collision of crustal terranes beginning at Lakshmi Planum and extending to the east. This sequence is initiated with the formation of Maxwell Montes and Western Fortuna Tessera during east-west crustal convergence, underthrusting, and stacking. The next step involves the northeast to southwest convergence of a preexisting thick block of tessera in Central Fortuna, which produces shear deformation within Western Fortuna. This northeast to southwest convergence also produces Northern Fortuna Tessera through crustal imbrication, a process recognized along the entire northern boundary of Ishtar Terra. Finally, Laima Tessera converges with Fortuna from the southeast and collides with Eastern Fortuna Tessera producing shear within Eastern Fortuna and the linear convergence zones along the edges of Laima. High resolution images returned by the Magellan spacecraft will enable us to examine the features involved in the proposed production and suturing of crustal terranes.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Main fault tectonics of Meshkenet Tessera on Venus

The lengthy Meshkenet Tessera highland located between Ishtar Terra and coronae of the Nightingale group provides evidence of large-scale crustal movements. Its complex tectonic structures have various deformation geometries, thus indicating different tectonic sequences. The main parallel faults, first explained as rotational bookshelf faults, are more likely due to relative dextral direct shear movements of rectangular blocks. These faults have been active, possibly due to endogenic stresses, as indicated by mid-size ridge ranges which connect them to some of the large coronae. There are some compressional ridge belts around Meshkenet Tessera, while deformation within the tessera blocks has mostly been extensional.     

Structural evolution of Lavinia Planitia, Venus: Implications for the tectonics of the lowland plains

This work shows the results of a detailed structural analysis of the deformation belts of Lavinia Planitia. Ridge belts and graben and groove belts can be observed at the studied area, while wrinkle ridges and large individual grooves predominate in the smooth plains. Transcurrent components of displacement are commonly observed, and transpression and transtension zones are the rule rather than the exception at most of the studied belts. Along-strike azimuth changes of deformation belts are accommodated by internal variations in the predominance of contractional, transcurrent or extensional structures. The material of the surrounding plains embays most of these deformation belts. The kinematic analysis of this complex network of tectonic structures suggests a broadly synchronous activity of contractional, transcurrent and extensional structures. The maximum horizontal shortening axis determined in this work describes a steady, semi-circular pattern centered at Alpha Regio. This deformation continued, although with subdued activity, after embayment of the deformation belts by the material of the plains. Future study of the tectonic evolution of the lowland plains should take into account the importance of the coeval history of neighboring uplands and lowlands.     

Geology and tectonics of the Themis Regio-Lavinia Planitia-Alpha Regio-Lada Terra area,Venus: Results from Arecibo image data

New radar images obtained from the Arecibo Observatory (resolution 1.5–4.0 km) for portions of the southern hemisphere of Venus show that: the upland of Phoebe Regio contains the southern extension of Devana Chasma, a rift zone extending 4200 km south from Theia Mons and interpreted as a zone of extension; Alpha Regio, the only large region of tessera within the imaged area, is similar to tessera mapped elsewhere on the planet and covers a smaller percentage of the surface than that observed in the northern high latitudes; the upland made of Ushas, Innini and Hathor Montes consists of three distinct volcanic constructs; Themis Regio is mapped as an ovoid chain of radar-bright arcuate single and double ring structures, edifices and bright lineaments. This area is interpreted as a region of mantle upwelling and on the basis of apparent split and separated features, a zone of localized faulting and extension. Linear zones of deformation in Lavinia Planitia are characterized by lineament belts that are often locally elevated, are similar to ridge belts mapped in the northern high latitudes and are interpreted to be characterized mainly by compression; radar-bright lava complexes within Lavinia Planitia are unique to this part of the planet and are interpreted to represent areas of eruption of high volumes of extremely fluid lava; the upland of Lada Terra is bound to the north by a linear deformation zone interpreted as extensional, is characterized by large ovoids and coronae, is interpreted to be associated with an area of mantle upwelling, and is in contrast to the northern high latitude highland of Ishtar Terra. Regions of plains in the southern hemisphere cover about 78%; of the mapped area and are interpreted to be volcanic in origin. Located within the area imaged (10–78 S) are 52 craters interpreted to be of impact origin ranging from 8 to 157 km in diameter. On the basis of an overall crater density of 0.94 craters/10⁶ km², it is determined that the age of this part of the Venus surface is similar to the 0.3 to 1.0 billion year age calculated for the equatorial region and northern high latitudes. The geologic characteristics of the portion of the Venus southern hemisphere imaged by Arecibo are generally similar to those mapped elsewhere on the planet. This part of the planet is characterized by widespread volcanic plains, large volcanic edifices, and zones of linear belt deformation. The southern hemisphere of Venus differs from northern high latitudes in that tessera makes up only a small percentage of the surface area and the ovoid chain in Themis Regio is unique to this part of the planet. On the basis of the analysis presented here, the southern hemisphere of Venus is interpreted to be characterized by regions of mantle upwelling on a variety of scales (ovoids, region made up of Ushas, Innini and Hathor Montes), upwelling and extension (Themis Regio) and localized compression (lineament belts in Lavinia Planitia).     

Cenozoic thick-skinned deformation and topography evolution of the Spanish Central System

The Spanish Central System is a Cenozoic pop-up with an E–W to NE–SW orientation that affects all the crust (thick-skinned tectonics). It shows antiform geometry in the upper crust with thickening in the lower crust. Together with the Iberian Chain it constitutes the most prominent mountainous structure of the Pyrenean foreland.The evolutionary patterns concerning the paleotopography of the interior of the Peninsula can be established by an analysis of the following data: gravimetric, topographical, macro and micro tectonic, sedimentological (infilling of the sedimentary basins of the relative foreland), P–T–t path from apatite fission tracks, paleoseismic and instrumental seismicity.Deformation is clearly asymmetric in the Central System as evidenced by the existence of an unique, large (crustal-scale) thrust at its southern border, while in the northern one there is a normal sequence of north verging thrusts, towards the Duero Basin, whose activity ended during the Lower Miocene. This deformation was accomplished under triaxial compression, Oligocene–Lower Miocene in age, marked by NW–SE to NNW–SSE shortening. Locally orientations of paleostresses deviate from that of the regional tensor, following a period of relative tectonic quiescence. During the Upper Miocene–Pliocene, a reactivation of constrictive stress occurred and some structures underwent rejuvenation as a consequence of the action of tectonic stresses similar to those of today (uniaxial extension to strike–slip with NW–SE shortening direction). However, the westernmost areas show continuous activity throughout the whole of the Tertiary, with no apparent pulses. At the present time there is a moderate seismic activity in the Central System related to faults that were active during the Cenozoic, with the same kinematic characteristics.     

Assemblages of geologic/morphologic units in the northern hemisphere of Venus

The geologic/morphologic map of the northern mid-to-high latitudes of Venus prepared by a Soviet science team on the basis of Venera 15/16 mission radar image coverage is analyzed and used to define six discrete assemblages of geologic/morphologic units that have well-defined geographic distributions. These assemblages have distinctive and differing geological and tectonic expressions and include: Plains Assemblage - which is dominated by lowland smooth plains and lowland rolling plains interpreted to be of volcanic origin, and a high concentration of small volcanic domes; Plains-Corona Assemblage - which is dominated by lowland smooth plains and lowland rolling plains interpreted to be of volcanic origin, at least ten coronae structures concentrated in the northern half of the region, and at least five large volcanoes, generally concentrated in the southern and western half of the region; Plains-Ridge Belt Assemblage - which is dominated by lowland smooth plains and lesser amounts of lowland rolling plains, major occurrences of ridge belts in a distinctive fan-shaped pattern, and very minor and patchy occurrences of tessera; Plains-Corona-Tessera Assemblage - which is dominated by approximately equal amounts of lowland smooth plains and lowland rolling plains, at least five coronae concentrated in the northern part of the region, a small number of large volcanoes, also in the northern part of the region, and numerous small patches of tesserae scattered throughout, and the highest abundance of small volcanic domes observed in the northern hemisphere; Tessera-Ridge Belt Assemblage — which is dominated by a few large areas (Fortuna, Laima, Tellus) and several smaller areas (Dekla, Meni) of tesserae, ridge belts generally arrayed in an angular and often orthogonal pattern different from the fan-shaped pattern of the Plains-Ridge Belt Assemblage, lowland rolling plains and lesser amounts of lowland smooth plains, and an upland rise (Bell Regio); Tessera-Mountain Belt Assemblage - which is centered on the two volcanoes Colette and Sacajawea in Lakshmi Planum, and characterized by the peripheral mountain belt/tessera pairs, with the tessera on the outboard side: Danu/Clotho (S), Akna/Atropos (W), Freyja/ltzpapalotl (N), and Maxwell/Fortuna (E).The distribution and characteristics of assemblages demonstrate that vertical and horizontal tectonic forces are operating on the crust and lithosphere of Venus in different ways in specific localized areas. Alternative models are outlined for the origin of each assemblage and the relationship between assemblages, and important unresolved questions are identified. A key to the further understanding of these assemblages is the origin of ridge belts and tessera terrain.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Lakshmi Planum,Venus: Characteristics and models of origin

Lakshmi Planum is distinctive and unique on the surface of Venus as an expansive (~2 × 10⁶km²), relatively smooth, flat plateau containing two large shield volcanoes and abundant volcanic plains in the midst of a region of extreme relief. It rises 3–5 km above the datum and is surrounded on all sides by bands of mountains interpreted to be of compressional tectonic origin. The major units mapped on Lakshmi are volcanic edifices, smooth, ridged and grooved plains units, and structural units referred to as ridged terrain. Three styles of volcanism are observed to dominate the surface of Lakshmi. Distributed effusive volcanism is associated with extensive plains deposits and many of the small shields, domes and cones mapped within the plateau. Centralized effusive volcanism is primarily associated with the paterae, Colette and Sacajawea, and their circumferential low-shield-forming deposits. The precise origin and evolution of these unusually large and complex structures is not understood, although a catastrophic, explosive origin is unlikely. Pyroclastic volcanism may be represented by a unit referred to as the diffuse halo. The origin and evolution of Lakshmi Planum is closely related to its compressional tectonic environment; volcanism on Lakshmi has occurred synchronously with tectonism in the surrounding orogenic belts. A model for the origin and evolution of Lakshmi Planum consisting of a continuous sequence of convergence and horizontal shortening of crustal segments against a preexisting block of tessera seems best able to account for the elevation, plateau shape and irregular polygonal outline of Lakshmi, as well as the presence of ridged terrain and its resemblance to tessera. Volcanism on Lakshmi is proposed to be the result of basal melting of a thickened crustal root. According to this model, the origin and evolution of Lakshmi Planum has consisted of the following sequence of events: (1) formation of a large, elevated block of tessera surrounded by low-lying plains; (2) convergence and underthrusting of crustal segments to produce peripheral mountain ranges, thickening, and uplift of the plateau; and (3) basal melting of the thickened crust and underthrust material and surface volcanism that occurred synchronously with continued edge deformation.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence). Gordon H. Pettengill (MIT. Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).     

Age and origin of the lowlands of Mars

One of the many significant findings of the Mars Global Surveyor mission is the presence of hundreds of quasi-circular depressions (QCDs) observed from high-resolution MOLA topography data. Their presence has recently been interpreted to reflect a northern lowlands that archive some of the earliest recorded rocks on Mars, mostly below a veneer of Hesperian and Amazonian materials. Here we analyze these data, coupled with a recent synthesis of geologic, geophysical, geomorphic, topographic, and magnetic information. Such analysis allows us to suggest a potential plate tectonic phase during the recorded Early into Middle Noachian martian history that transitioned into a monoplate world with episodic magmatic-driven activity persisting to present. This working hypothesis is based on: (1) the observation that the basement of the northern plains is younger than the basement of the southern highlands, but older than the material exposures of the cratered highlands, suggesting different formational ages for each one of the three geologic-time units; (2) the observation that parts of the very ancient highland's crust are highly magnetized, thus suggesting that most if not all of the formation of the lowlands basement postdates the shut off of the martian dynamo, some 4 Gyr ago, and so allowing hundreds of millions of years for the shaping of the buried lowlands. Consequently, the role of endogenic processes in the earliest geological evolution of Mars (Early perhaps into Middle Noachian) requires reconsideration, since MOLA topographic and MGS magnetic data afford a temporal window sufficient for very early, non-primordial shaping of the northern lowlands' basement.     

Velocity structure and properties of the lunar crust

Lunar seismic data from three Apollo seismometers are interpreted to determine the structure of the Moon's interior to a depth of about 100 km. The travel times and amplitudes ofP arrivals from Saturn IV B and LM impacts are interpreted in terms of a compressional velocity profile. The most outstanding feature of the model is that, in the Fra Mauro region of Oceanus Procellarum, the Moon has a 65 km thick layered crust. Other features of the model are: (i) rapid increase of velocity near the surface due to pressure effects on dry rocks, (ii) a discontinuity at a depth of about 25 km, (iii) near constant velocity (6.8 km/s) between 25 and 65 km deep, (iv) a major discontinuity at 65 km marking the base of the lunar crust, and (v) very high velocity (about 9 km/s) in the lunar mantle below the crust. Velocities in the upper layer of the crust match those of lunar basalts while those in the lower layer fall in the range of terrestrial gabbroic and anorthositic rocks.Lamant-Doherty Geological Observatory Contribution No. 1768.     

The thermal state of the Venusian mantle

Assuming that the surface topography of the Ovda and Thetis plateaus, and that of the saddle region between Thetis and Atla plateaus, is due to surface subsidence of oceanic-type thermal boundary layers, we calculated the temperature at 200 km beneath the plateaus to be about 1600 C, and that beneath the saddle region to be about 1400–1500 C. The total subsidence of Ovda plateau in the last 3/4 of its existence, i.e. between 200 km and 800 km off the postulated ridge axis, suggests that the plateau is probably a young feature, less than 40 m.y. old. The spreading plate models imply a half-spreading rate of 2.3–5.3 cm/yr for the plateaus and 2–2.8 cm/yr for the saddle region.     

Tectonic geomorphology of the northern Upper Rhine Graben, Germany

This paper focuses on the northern Upper Rhine Graben (URG), which experienced low tectonic deformation and multiple climate changes during Quaternary times. Recently, human modifications have been high. The paper presents the results of a study into the effects of fault activity on the landscape evolution of the area. The study aims to detect active faults and to determine the last phase of tectonic activity. Information on the long-term tectonic activity is gained from the geological record (drainage system, sediment distributions, fluvial terraces, fault mapping). Previous studies are reviewed and supplemented with new data on tectonic activity. The compilation of all data is presented as a series of paleogeographic maps from Late Miocene to present. It is demonstrated that differential uplift of the western margin of the northern URG had significant impact on the drainage system, the formation of fluvial terraces and the landscape of the western graben shoulder. In a second part of the paper, the imprint of tectonics on the present-day landscape is investigated at the regional scale in order to determine the location of fault scarps and tectonically influenced parts of the drainage system. This study uses an integrated analysis of topography, drainage patterns and fault network. The comparison of features suggests a structural control by numerous NNE- and NNW-oriented intra-graben faults on the flow directions of streams in the Rhine Valley. Several scarps in the Rhine Valley are identified and interpreted to result from intra-graben faulting activity, which in turn controlled fluvial dissection. The third part of the paper presents quantitative measurements of the present-day landscape shape. Calculations of geomorphic indices are used to determine the balance between erosional and tectonic processes and to identify active fault segments. The mountain-front sinuosity and valley shape indices measured along the border faults and in the footwall area are used to determine the level of activity of the faults. Stream profiles of the western and eastern catchments of the River Rhine are investigated for gradient changes at the crossing of the border faults. The combined interpretation of geomorphic indices points to active border fault segments on both sides of the graben. Based on the integration of all results it is concluded that the tectonic morphology identified for the northern URG formed in response to long-term, low level tectonic processes. Due to a significant decrease in erosional and depositional activity during the last 15,000 years, the tectonic morphology has probably been preserved until present.     

Rebuttal to the comment by Malhotra and Strom on “Constraints on the source of lunar cataclysm impactors”

?uk et al. (?uk, M. Gladman, B.J., Stewart, S.T. [2010]. Icarus 207 590-594) concluded that the the lunar cataclysm (late heavy bombardment) was recorded in lunar Imbrian era craters, and that their size distribution is different from that of main belt asteroids (which may have been the dominant pre-Imbrian impactors). This result would likely preclude the asteroid belt as the direct source of lunar cataclysm impactors. Malhotra and Strom (Malhotra, R., Strom, R.G. [2011]. Icarus) maintain that the lunar impactor population in the Imbrian era was the same as in Nectarian and pre-Nectarian periods, and this population had a size distribution identical to that of main belt asteroids. In support of this claim, they present an Imbrian size distribution made from two data sets published by Wilhelms et al. (Wilhelms, D.E., Oberbeck, V.R., Aggarwal, H.R. [1978]. Proc. Lunar Sci. Conf. 9, 3735-3762). However, these two data sets cannot be simply combined as they represent areas of different ages and therefore crater densities. Malhotra and Strom (Malhotra, R., Strom, R.G. [2011]. Icarus) differ with the main conclusion of Wilhelms et al. (Wilhelms, D.E., Oberbeck, V.R., Aggarwal, H.R. [1978]. Proc. Lunar Sci. Conf. 9, 3735-3762) that the Nectarian and Imbrian crater size distributions were different. We conclude that the available data indicate that the lunar Imbrian-era impactors had a different size distribution from the older ones, with the Imbrian impactor distribution being significantly richer in small impactors than that of older lunar impactors or current main-belt asteroids.     

Experimental simulation of the formation of non-circular active depressions on Comet Wild-2 and of ice grain ejection from cometary surfaces

Following the tracing of jets emanating from Comet Wild-2 to depressions in the ice by Brownlee et al. [2004. The Stardust—A successful encounter with the remarkable Comet Wild 2. Lunar Planet. Sci. 35. Abstract 1981], we demonstrated experimentally the formation of depressions and chaotic terrain on comet analogs when gas is released from underlying ice pockets. We also demonstrated experimentally the ejection of ice grains into the experimental cometary “coma.”     

An analysis of the Mariner 10 color ratio map of mercury

The results of a geological analysis of the Mariner 10 orange/UV color ratio man of Mercury (B. Hapke, C. Christman, B. Rava, and J. Mosher, Proc. Lunar Planet Sci. Conf. 11th 1980, pp. 817–822) are given. Certain errors that occured in reproducing the published version of the 1980 map are pointed out. The relationships between color and terrain are distinctly nonlunar. There is no correlation between color boundaries and the smooth plains on Mercury, in contrast to the strong correlation between color and maria-highlands contacts on the Moon. There are no large exposures of low-albedo, blue material that could be considered to be Mercurian analogs of high-FeTi lunar maria basalts on any part of Mercury imaged by Mariner 10. Three lines of evidence imply that the crust is low in Fe²⁺ and Ti⁴⁺: rays and ejecta blankets are bluer than most areas on Mercury; the Fe²⁺ band in Mercury's reflectance spectrum is very weak or nonexistent and the albedo contrasts are smaller than those on the Moon. There is no evidence in the spectral or albedo data that a lunar type of second wave of melting ever occured on Mercury; rather, the observations are most consistent with the hypothesis that the smooth plains are extrusive landforms derived from local material, possibly mobilized by the Caloris event. In several places correlations between color and topography can be explained if older, redder, higher-Fe materials underlie younger, bluer, lower-Fe surfaces. There is some evidence of late Fe-rich pyroclastic-like activity.     

Present-day stress field and tectonic inversion in the Pannonian basin

This paper presents a latest compilation of data on the present-day stress pattern in the Pannonian basin, and its tectonic environment, the Alpine–Dinaric orogens. Extensional formation of the basin system commenced in the early Miocene, whereas its structural reactivation, in the form of gradual basin inversion, has been taking place since Pliocene to recent times. Reconstructed compression and associated horizontal contraction are mainly governed by the convergence between Adria and its buffer, the Alpine belt of orogens. The resulting contemporaneous stress field exhibits important lateral variation resulting in a complex pattern of ongoing tectonic activity. In the Friuli zone of the Southern Alps, where thrust faulting prevails, compression is orthogonal to the strike of the mountain belt. More to the southeast, intense contraction is combined with active strike–slip faulting constituting the dextral Dinaric transpressional corridor. Stresses are transferred far from Adria into the Pannonian basin, and the dominant style of deformation gradually changes from pure contraction through transpression to strike–slip faulting. The importance of late-stage inversion in the Pannonian basin is interpreted in a more general context of structural reactivation of back-arc basins where the sources of compression driving basin inversion are also identified and discussed. The state of recent stress and deformation in the Pannonian basin, particularly in its western and southern part, is governed by the complex interaction of plate boundary and intra-plate forces. The counterclockwise rotation and north-northeast-directed indentation of the Adriatic microplate appears to be of key importance as the dominant source of compression (“Adria-push”). Intra-plate stress sources, such as buoyancy forces associated with an elevated topography, and crustal as well as lithospheric inhomogeneities can also play essential, yet rather local role.     

Influence of substrate tectonic heritage on the evolution of composite volcanoes: Predicting sites of flank eruption, lateral collapse, and erosion

This paper aims to aid understanding of the complicated interplay between construction and destruction of volcanoes, with an emphasis on the role of substrate tectonic heritage in controlling magma conduit geometry, lateral collapse, landslides, and preferential erosion pathways. The influence of basement structure on the development of six composite volcanoes located in different geodynamic/geological environments is described: Stromboli (Italy), in an island arc extensional tectonic setting, Ollagüe (Bolivia–Chile) in a cordilleran extensional setting, Kizimen (Russia) in a transtensional setting, Pinatubo (Philippines) in a transcurrent setting, Planchon (Chile) in a compressional cordilleran setting, and Mt. Etna (Italy) in a complex tectonic boundary setting. Analogue and numerical modelling results are used to enhance understanding of processes exemplified by these volcanic centres. We provide a comprehensive overview of this topic by considering a great deal of relevant, recently published studies and combine these with the presentation of new results, in order to contribute to the discussion on substrate tectonics and its control on volcano evolution. The results show that magma conduits in volcanic rift zones can be geometrically controlled by the regional tectonic stress field. Rift zones produce a lateral magma push that controls the direction of lateral collapse and can also trigger collapse. Once lateral collapse occurs, the resulting debuttressing produces a reorganization of the shallow-level magma migration pathways towards the collapse depression. Subsequent landslides and erosion tend to localize along rift zones. If a zone of weakness underlies a volcano, long-term creep can occur, deforming a large sector of the cone. This deformation can trigger landslides that propagate along the destabilized flank axis. In the absence of a rift zone, normal and transcurrent faults propagating from the substrate through the volcano can induce flank instability in directions respectively perpendicular and oblique to fault strike. This destabilization can evolve to lateral collapse with triggering mechanisms such as seismic activity or magmatic intrusion.