共查询到20条相似文献,搜索用时 31 毫秒
1.
Damage observed in existing structures after recent earthquake events pointed out the key importance of beam-to-column joints in influencing the global response of reinforced concrete structures. In the last two decades several theoretical and empirical models have been proposed for evaluating shear strength of beam-to-column joints. The present paper reports an overview of the models currently available in the scientific literature for evaluating shear capacity of exterior beam-to-column joints. The present study is the first step of a wide analysis aimed at assessing such models and improving them. Moreover, the uncertainties deriving by applying the mentioned models will be also quantified therein, by means of well-established procedures for probabilistic seismic analysis of structures. The final results of that study are reported within a companion paper. 相似文献
2.
Modelling exterior unreinforced beam‐column joints in seismic analysis of non‐ductile RC frames
下载免费PDF全文
![点击此处可从《地震工程与结构动力学》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The seismic response of non‐ductile reinforced concrete (RC) buildings can be affected by the behaviour of beam‐column joints involved in the failure mechanism, especially in typical existing buildings. Conventional modelling approaches consider only beam and column flexibility, although joints can provide a significant contribution also to the overall frame deformability. In this study, the attention is focused on exterior joints without transverse reinforcement, and a possible approach to their modelling in nonlinear seismic analysis of RC frames is proposed. First, experimental tests performed by the authors are briefly presented, and their results are discussed. Second, these tests, together with other tests with similar features from literature, are employed to calibrate the joint panel deformability contribution in order to reproduce numerically the experimental joint shear stress–strain behaviour under cyclic loading. After a validation phase of this proposal, a numerical investigation of the influence of joints on the seismic behaviour of a case study RC frame – designed for gravity loads only – is performed. The preliminary failure mode classification of the joints within the analysed frame is carried out. Structural models that (i) explicitly include nonlinear behaviour of beam‐column joints exhibiting shear or anchorage failure or (ii) model joints as elements with infinite strength and stiffness are built and their seismic performance are assessed and compared. A probabilistic assessment based on nonlinear dynamic simulations is performed by means of a scaling approach to evaluate the seismic response at different damage states accounting for uncertainties in ground‐motion records. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
Since most current seismic capacity evaluations of reinforced concrete(RC) frame structures are implemented by either static pushover analysis(PA) or dynamic time history analysis,with diverse settings of the plastic hinges(PHs) on such main structural components as columns,beams and walls,the complex behavior of shear failure at beam-column joints(BCJs) during major earthquakes is commonly neglected.This study proposes new nonlinear PA procedures that consider shear failure at BCJs and seek to assess the actual damage to RC structures.Based on the specifications of FEMA-356,a simplified joint model composed of two nonlinear cross struts placed diagonally over the location of the plastic hinge is established,allowing a sophisticated PA to be performed.To verify the validity of this method,the analytical results for the capacity curves and the failure mechanism derived from three different full-size RC frames are compared with the experimental measurements.By considering shear failure at BCJs,the proposed nonlinear analytical procedures can be used to estimate the structural behavior of RC frames,including seismic capacity and the progressive failure sequence of joints,in a precise and effective manner. 相似文献
4.
This study presents a seismic fragility analysis of low‐rise masonry in‐filled (MI) reinforced concrete (RC) buildings using a proposed coefficient‐based spectral acceleration method. The coefficient‐based method, without requiring any complicated finite element analysis, is a simplified procedure for assessing the spectral acceleration demand (or capacity) of buildings subjected to earthquakes. This paper begins with a calibration of the proposed coefficient‐based method for low‐rise MI RC buildings using published experimental results obtained from shaking table tests. Spectral acceleration‐based fragility curves for low‐rise MI RC buildings under various inter‐story drift limits are then constructed using the calibrated coefficient‐based method. A comparison of the experimental and estimated results indicates that the simplified coefficient‐based method can provide good approximations of the spectral accelerations at peak loads of low‐rise MI RC buildings, if a proper set of drift‐related factors and initial fundamental periods of structures are used. Moreover, the fragility curves constructed using the coefficient‐based method can provide a satisfactory vulnerability evaluation for low‐rise MI RC buildings under a given performance level. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
5.
This paper aims to provide a guideline for numerical modeling of reinforced concrete (RC) frame elements for the seismic performance assessment of a structure. Several types of numerical models of RC frame elements are available in nonlinear structural analysis packages. Because the numerical models are formulated based on different assumptions and theories, the models' accuracy, computing time, and applicability vary, which poses a great difficulty to practicing engineers and limits their confidence in the analysis results. In this study, the applicability of five representative numerical models of RC frame elements is evaluated through comparison with 320 experimental results available from the Pacific Earthquake Engineering Research column database. The accuracy of a numerical model is evaluated according to its initial stiffness, peak strength, and energy dissipation capacity of the global responses. In addition, a parametric study of a cantilever RC column subjected to earthquake excitation is carried out to systematically evaluate the consequence of the adopted numerical models on the maximum inelastic structural responses. It is found from this study that the accuracy of the numerical models is sensitive to shear force demand–capacity ratio. If a structural period is short and the structure is shear critical, the use of numerical models that can explicitly capture the shear deformation and failure is suggested. If the structural period is long, the selection of a numerical model does not greatly influence the global response of the structure. The paper also presents statistical parameters of each numerical model, which can be used for probabilistic seismic performance assessment. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
6.
实际地震作用是多维的、随机的,框架节点在2个方向同时受力,其抗震能力相比于单向地震作用会降低。目前,对节点核心区在2个方向同时受力时抗剪承载力的研究尚未完善。在双向受力下,节点核心区2个方向传来的剪力形成合剪力作用面,在节点核心区内部形成不同于单向受力下的斜向斜压杆。本文基于软化拉-压杆模型,针对水平双向受力相同的空间边节点,在合剪力作用面内建立抗剪承载力计算模型,确定空间边节点核心区斜压杆以及钢筋拉杆的计算方法。利用有限元软件建立不同参数空间边节点模型,并收集部分空间节点试验数据,将剪力计算值与模拟值或试验值进行对比。结果表明,基于软化拉-压杆模型建立的双向受力下钢筋混凝土框架,其边节点抗剪承载力计算值与模拟值或试验值吻合良好。 相似文献
7.
The experimental work and first results of a recently completed experimental research programme investigating the response of reinforced concrete (RC) walls under earthquake (EQ) loading are discussed in this paper. A brief literature review is given as a prelude to the outline of research objectives. The tests are presented in two groups according to the scale of models. For the 1:5 scale tests, a modified similitude relation for small scale reinforced concrete dynamic modelling is developed. Based on the chosen model parameters, the design of the isolated RC walls is given. The test-rig set-up and the EQ input signals suitable for testing the model on the Imperial College shake-table are also discussed. Preliminary observations regarding stiffness, strength and failure modes of the RC wall models are given. Experimental results from the shake-table are compared to tests, at the same scale, under static cyclic conditions. For the scale 1:2–5 cyclic tests a different test-rig assembly is designed. The test results are given in three pairs of flexurally similar walls followed with general observations and discussion. Finally, conclusions are drawn regarding experimental procedures and behaviour patterns of the tested models. 相似文献
8.
震后功能恢复能力是指建筑物、社区或城市等遭受地震影响后实现功能恢复的能力。以一钢筋混凝土框架结构为对象,基于OpenSees有限元分析平台,对其进行增量动力分析,得到其对应于不同损伤状态的地震易损性曲线。进而基于单体建筑损失评估理论,评估该结构在不同强度水准地震动作用下的地震损失,包括直接经济损失和间接经济损失等。在此基础上,分别利用直线型、指数型以及三角函数型功能恢复模型,在不同强度水准地震动作用下,分别计算该结构的震后功能恢复能力。结果表明:随着地震动强度的增加,基于3种恢复模型计算得到的震后功能恢复能力都在下降,而且直线型和三角函数型恢复模型得到的恢复能力均比指数型的下降更快;在同一强度水准地震动作用下,基于指数型恢复模型计算得到的震后功能恢复能力均高于直线型和三角函数型恢复模型,即使在较强水准地震动作用下,根据指数型恢复模型得到的恢复能力依然较大。而在各个强度水准地震动作用下,基于直线型和三角函数型恢复模型得到的震后功能恢复能力非常接近。 相似文献
9.
10.
11.
为量化地震作用下钢筋混凝土(RC)柱损伤情况和变形,并将不同地震破坏状态下RC柱损伤和变形进行分析。从太平洋地震工程研究中心(PEER)数据库中收集91组RC柱抗震试验数据,选取4种广泛应用的构件损伤模型进行计算,将损伤发展曲线与层间位移角发展曲线进行对比分析。对RC柱损伤指标限值进行归一化处理,统计分析后得到不同破坏等级下的位移角限值,并给出了RC柱各破坏等级下的位移角限值与损伤指标限值对应关系。研究结果表明,牛荻涛损伤模型可更准确地评价地震作用下结构构件损伤程度,且与层间位移角发展曲线均呈近似线性增长趋势;不同破坏等级下的位移角限值验算保证率均>80%,表明本文提出的位移角限值具有一定合理性。 相似文献
12.
Numerous non‐ductile reinforced concrete (RC) buildings with little or no shear reinforcement in beam‐column joints can be found in regions of moderate seismicity. To strengthen such substandard beam‐column joints, this study proposes a method in which RC wing walls are installed beside existing columns, which overcomes the lack of realistic strengthening methods for congested connections in RC buildings. The proposed strengthening mechanism improves the joint moment capacity by utilizing tension and compression acting on the beam–wing wall boundaries; thus, brittle joint hinging failure is prevented. Three 3/4‐scale RC exterior beam‐column joint specimens without shear reinforcement, two of which were strengthened by installing wing walls with different strengthening elements, were fabricated and tested. The test results verified the effectiveness of the proposed strengthening method and the applicability of this method to seismically substandard beam‐column joints. © 2017 The Authors. Earthquake Engineering & Structural Dynamics Published by John Wiley & Sons Ltd. 相似文献
13.
为了提高钢筋混凝土建筑结构的抗震性能,分析多维地震作用下钢筋混凝土建筑结构的抗连续倒塌能力,结合钢筋混凝土建筑结构特性、节点构造特点以及其在多维地震作用下的破坏机理,采用离散单元法建立结构连续倒塌的理论模型,对建筑结构连续倒塌过程进行数值模拟。基于数值模拟化结果,通过备用荷载路径法,实现建筑结构的抗连续倒塌分析。仿真实验结果得出,所提方法能实现对建筑结构抗连续倒塌的准确分析,且在多维地震作用下建筑结构扭转的幅度明显变大,结构顶层位移发散状态显著,不同楼层会产生不同的层间位移以及薄弱部位,建筑结构的抗连续倒塌性能随着失效构件位置的提升而增强。 相似文献
14.
Most of the available models of monolithic reinforced concrete joints under seismic action focus on estimation of cracking
and ultimate shear strengths. Very few studies have been directed towards developing expressions for the associated joint
deformations at the milestone response points so as to compose a limit-state model for joints that would be compatible with
the emerging framework of deformation based seismic assessment and design methods. This objective is pursued in the present
paper with particular emphasis on monolithic bridge joints. Deformation capacity at yielding and failure of joints is derived
by establishing equilibrium and geometric compatibility of smeared stresses and strains, and satisfying material constitutive
relationships. Expressions and model parameters are calibrated with the database of published bridge joint tests assembled
from International literature, using statistical evaluation. From the mean values of the design parameters simplified equations
for shear strength and ultimate shear strain of bridge joints are proposed. 相似文献
15.
Experimental research and finite element analysis of bridge piers failed in flexure-shear modes 总被引:2,自引:1,他引:1
In recent earthquakes, a large number of reinforced concrete (RC) bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element (FE) analysis study is described in this paper to study the seismic performance of the bridge piers that failed in flexure-shear modes. In the first part, a nonlinear cyclic loading test on six RC bridge piers with circular cross sections is carried out experimentally. The damage states, ductility and energy dissipation parameters, stiffness degradation and shear strength of the piers are studied and compared with each other. The experimental results suggest that all the piers exhibit stable flexural response at displacement ductilities up to four before exhibiting brittle shear failure. The ultimate performance of the piers is dominated by shear capacity due to significant shear cracking, and in some cases, rupturing of spiral bars. In the second part, modeling approaches describing the hysteretic behavior of the piers are investigated by using ANSYS software. A set of models with different parameters is selected and evaluated through comparison with experimental results. The influences of the shear retention coefficients between concrete cracks, the Bauschinger effect in longitudinal reinforcement, the bond-slip relationship between the longitudinal reinforcement and the concrete and the concrete failure surface on the simulated hysteretic curves are discussed. Then, a modified analysis model is presented and its accuracy is verified by comparing the simulated results with experimental ones. This research uses models available in commercial FE codes and is intended for researchers and engineers interested in using ANSYS software to predict the hysteretic behavior of reinforced concrete structures. 相似文献
16.
Gianni Blasi Daniele Perrone Maria Antonietta Aiello 《Bulletin of Earthquake Engineering》2018,16(12):6105-6130
A wide number of experimental studies conducted in latest years pointed out the high influence of the mechanical properties of masonry units and mortar bed joints on lateral strength and stiffness of masonry panels. This feature significantly modifies the global response of infilled frames under seismic actions as well as the local interaction phenomena. Despite a wide investigation on the influence of the infills on global behaviour of reinforced concrete (RC) frames has already been provided, different features characterizing the seismic performances of buildings suggest the need of accurately evaluating local interaction phenomena as well as the influence of the panel on specific and relevant aspects, as the accelerations transferred to non-structural components. This study provides a parametrical analysis of the influence of shear strength and elastic modulus of masonry infills on the seismic behaviour of RC frames originally designed for gravity loads. Regular buildings with different height were analysed using the Incremental Dynamic Analysis in order to provide fragility curves, investigate on the collapse mechanisms and define the floor spectra depending on the properties of the infills. Results obtained pointed out the high influence of the considered parameters on the fragility of existing RC frames, often characterized by inadequate transversal reinforcement of columns, which may lead to brittle failure due to the interaction with the infills. Floor response spectra are also significantly affected by the influence of masonry infills both in terms of shape and maximum spectral accelerations. Lastly, on the basis of the observed failure mechanisms, a parameter defining the ductility of the frames depending on the properties of the infills was also provided (Capacity Design Factor). The correlation between the mechanical properties of the infills and this parameter suggests its reliability in the simplified vulnerability analysis of existing buildings as well as for the design of new buildings. 相似文献
17.
In a companion paper two different modelling approaches have been described, operating at the meso‐scale of the fibre elements and at the micro‐scale of the finite element (FE) method. The aim of this paper is to explore the efficiency of these models in the pushover analysis for the seismic assessment of existing reinforced concrete (RC) structures. To this purpose a prototype reference structure, one of the RC shear walls designed according to the multi‐fuse concept and tested on shaking table for the CAMUS Project, is modelled at different levels of refinement. At the micro‐scale the reinforcement and anchorage details are described with increasing accuracy in separate models, whereas at the meso‐scale one single model is used, where each element represents a large part of the structure. Static incremental non‐linear analyses are performed with both models to derive a capacity curve enveloping the experimental results and to reproduce the damage pattern at the displacement level where failure is reached. The comparison between experimental and numerical results points out the strong and weak points of the different models inside the procedure adopted, and the utility of an integration of results from both approaches. This study confirms, even for the rather difficult case at study, the capability of the pushover in reproducing the non‐linear dynamic response, both at a global and a local level, and opens the way to the use of the models within a displacement‐based design and assessment procedure. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
18.
不同连梁跨高比带暗支撑双肢剪力墙抗震性能试验研究 总被引:2,自引:0,他引:2
为探讨不同连梁跨高比带暗支撑双肢剪力墙的抗震性能,进行了2组连梁跨高比分别为1.0和1.5的4个4层双肢剪力墙1/4缩尺模型的抗震性能试验研究。较系统地分析了结构的刚度及其退化过程以及承载力、延性、耗能、破坏机制和破坏特征等。结果表明,连梁跨高比相对小的带暗支撑双肢剪力墙抗震性能较好。承载力计算结果与实测值符合较好。 相似文献
19.
20.
FRP抗震加固混凝土梁柱节点的受剪承载力分析 总被引:3,自引:1,他引:2
通过采用SGFRP、HFRP加固的四个混凝土梁柱节点在低周反复荷载作用下的抗震性能对比试验研究,提出了FRP加固节点受剪承载力的计算公式,并基于分析给出了相关计算参数的工程设计建议取值,并对加固方式、纤维品种、纤维粘贴角度等主要因素对节点抗剪承载能力的影响机理进行了分析,结果表明:在节点核心区和梁柱端头粘贴纤维可以有效的提高节点的受剪承载能力;加固方式直接影响节点受剪承载能力的大小。 相似文献