新疆古尔班通古特沙漠生物结皮的土壤理化性质分析

古尔班通古特沙漠是我国第二大沙漠,广泛发育着地衣、苔藓和藻类等生物结皮,其分布状况与其自身生理生态特点和所处沙丘部位的环境条件密切联系着.结合野外调查和实验室样品分析结果,讨论了沙丘不同部位土壤理化性质与生物结皮分布、发育的关系.结果表明:不同类型生物结皮在沙丘上的分布和发育状况是不同的,从沙丘顶部的流动或半流动沙面上到沙丘两坡的中部、下部以及丘间低地,生物结皮的分布依次为微生物种类、藻类结皮、地衣结皮和苔藓结皮,从沙丘上部、中部至沙丘底部及丘间,生物结皮的类型、厚度及发育程度呈增强态势.生物结皮在沙丘不同部位的发育特点和分异变化与沙丘不同地貌部位的土壤理化性状、地表基质稳定性等生态条件有着密切的关系.     

Biological soil crust development and its topsoil properties in the process of dune stabilization, Inner Mongolia, China

This study was undertaken at Horqin Sand Land, Inner Mongolia, Northern China. Field samples of biological soil crusts (BSCs) and underlying topsoil (0–5 cm under BSC) were taken in areas of different dune stabilization stages, and their physicochemical properties were analyzed, including particle size distribution, bulk density, organic matter, nitrogen, phosphorus, electrical conductivity (EC), pH, and CaCO₃ content. The results revealed that semi-mobile dunes, semi-fixed dunes and fixed dunes had developed a physical crust, algae crust and moss crust, respectively. The thickness, hardness, water content, fine fraction and nutrient contents of BSCs were gradually increasing along the dune stabilization gradient. Meanwhile, BSC establishment and development enhanced the bulk density, silt and clay content, and nutrients of the topsoil under it, in an increasing tend from semi-mobile dune to fixed dune. Organic matter concentrations and other nutrients in the 0–5 cm topsoil layer under BSCs were significantly higher compared to unconsolidated soil (control). Moreover, there were strong significant positive correlations between topsoil and BSCs’ organic matter, total nitrogen, available nitrogen, available phosphorus, CaCO₃, and <0.05 mm particle content, suggesting that BSCs have an influence on some of the properties of the underlying topsoil.     

荒漠地区土壤初始状况对水平入渗的影响

通过对沙坡头荒漠地区人工植被固沙区生物土壤结皮与固沙区外天然沙丘沙以及天然植被红砂、珍珠分布区砂粘土在不同初始含水率（θ_i）条件下土壤水平入渗过程的对比试验研究,探讨土壤质地以及θ i对水平入渗系数（λ_f）、剖面平均含水率（θ_m）状况的影响。生物土壤结皮对降水入渗量的截持作用大于沙丘沙,因而将显著地改变降水入渗过程中土壤水分的再分配格局,减少降水对深层土壤（沙丘沙）的有效补给。通过对土壤剖面平均含水率θ_m与距离湿润锋前缘0～5 cm、5～10 cm处体积含水率θ_fA、θ_fB比较,生物土壤结皮的θ_m、θ_fA和θ_fB分别约为沙丘沙的1．5倍。     

Spatial heterogeneity of cyanobacteria-inoculated sand dunes significantly influences artificial biological soil crusts in the Hopq Desert (China)

Artificial biological soil crusts (ABSCs), formed by inoculating Microcoleus vaginatus Gom. and Scytonema javanicum Born. et Flah. onto the topsoil of desert dunes, proved to be effective tools for the stabilization of moving dunes and promotion of soil fertility. As dominant driving forces in arid habitats, the abiotic environmental conditions of undulating dunes produce a gradient of abiotic stresses on cyanobacteria. Cyanobacteria are considered pioneering phototrophs in early soil crust communities in deserts. In this study, the development of ABSCs under various environmental site conditions was investigated using 16S rRNA-based polymerase chain reaction, denaturing gradient gel electrophoresis (DGGE), and soil property measurements. After inoculation in 2002 and long-term development, patchy moss crusts were observed on the dunes. All of the available sequenced bands in the DGGE gels belonged to Oscillatoriales and Nostocales. The dominant Nostocales genus in the ABSCs was still Scytonema; however, more Oscillatoriales genera were identified, which belonged to Microcoleus and Phormidium. The cyanobacterial compositions of different slope types were significantly distinct (p < 0.05), particularly those from windward slopes. The crusts of the top-dune slopes were more heterogeneous. In addition, the soil physicochemical properties and richness indices of the windward slopes were significantly lower than those of the leeward and interdune slopes (p < 0.05). Compared with uninoculated control dunes, all of the inoculated dunes had far higher biodiversities.     

Fractal characteristics of resource quantity of cobalt crusts and seamount topography, the West Pacific

This paper presents the fractal distribution of topography of seamounts from the West Pacific and the resource quantity of cobalt crust therein. The cobalt resource quantity has three to four variable fractal dimensions, corresponding to the distinct slopes and water depths of the seamount. The multiple fractal property of resource quantity may have resulted from various factors, such as types and components of cobalt crusts and ages of oceanic crusts hosting the seamounts. Individual seamounts display complex topography and quantity of cobalt crust, both in the same and different regions. Translated from Acta Sedimentologica Sinica, 2006, 24(5): 705–713 [译自: 沉积学报]     

Distribution and Classification of Cobalt-Rich Crust

INTRODUTIONThe sea- floor metallic mineral resources are classified asmany types such as multi- m etallic nodules,metallic oozes,massive sulfide deposits and iron- manganese crusts.Before1980 s,China did not made any researches into metallic oozeand massive sulfide deposits;but China started to study m ul-ti- metallic nodules in the early1980 s,15 - 2 0 years later thanthe developed industry countries did.However,in the shortten years,we have caught up with the developed countries,and our…     

Successional stages of biological soil crusts and their microstructure variability in Shapotou region (China)

In order to investigate succession of biological soil crusts (BSCs) and their microstructure variability, we conducted this work in Shapotou revegetation region at the southeast edge of Tengger Deser. The results showed that BSCs generally succeeded as a pathway of “Algae crusts, algae–lichen crusts, lichen crusts, lichen–moss crusts and moss crusts”. Occasionally mosses directly occurred on algae crusts, and BSCs succeeded from algae crusts to moss crusts. Crust vertical stratification was a common phenomenon, from top to bottom an inorganic layer, algae-dense layer and algae-sparse layer were divided in algae crusts; a thallus layer, rhizoid layer and sub-rhizoid layer in lichen crusts; a “stem-leaf” layer, rhizoid layer and sub-rhizoid layer in moss crusts, respectively. The main crust binding organisms varied from filamental cyanobacteria (dominated by Microcoleus) in algae crusts to lichen rhizoids, free-living cyanobacterial filaments and fungal hyphaes in lichen crusts, and to moss rhizoids and fungal hyphaes in moss crusts. The dominant phototrophic organisms varied from Microcoleus (algae) in algae crusts to Collema (lichens) in lichen crusts, and to Bryum (or Didymodon and Tortula; mosses) in moss crusts. Total phototrophic biomass increased while the free-living algal biomass decreased with the succession of BSCs. In addition, exopolysaccharides and fine particles accumulated in the course of development and succession of BSCs, all of which lead to a gradual increase in crust thickness and porosity, while decrease in the bulk density.     

Effectiveness of a new organic polymer sand-fixing agent on sand fixation

Sand erosion due to wind is a serious problem in the relatively arid and semiarid areas. A new organic polymer sand-fixing agent (PVIN), polymerized by the monomer of vinyl acetate, initiator and cross-linking agent, is introduced in this study. To understand the effect of PVIN on sand fixation, the strength test, water-retaining test and wind erosion test were performed. The results indicated that the presence of PVIN could improve the structural strength, water retaining and anti-wind erosion ability. When the sand-fixing agent was applied on the sand surface, the crust in surface layer was produced. The structural strength variations determined by micropenetrometer indicated that the specimens treated with concentrations of 1, 3, 5, 10, and 20% PVIN have produced the crusts with thickness being approximately 1, 2, 4–5, 5, and 5–6 mm and the strength being around 1, 4.5, 18, 26 and 41, respectively. This crust has a good water-absorption, water-retaining and anti-evaporation properties. It can also improve the anti-wind erosion ability, and also prevent the loose sand surface from forming a sand dune in the wind erosion conditions. Additionally, this sand-fixing agent has a low cost, it is easier to produce and apply and also produces no additional pollution. Therefore, this can be considered as an ideal soil-fixing agents to control sand erosion in the relatively arid and semiarid areas.     

Ferromanganese crusts as indicators for paleoceanographic events in the NE Atlantic

Hydrogenetic ferromanganese crusts reflect the chemical conditions of the sewater from which they formed. Fine-scale geochemical analysis of crust layers in combination with age determinations can therefore be used to investigate paleoceanographic changes which are recorded in geochemical gradients in the crusts. At Tropic seamount (off northwest Africa), uniform crust growth influenced by terrigenous input from the African continent occurred during approximately the past 12 Ma. Phosphatization of these crusts is minor. In contrast, crusts from Lion seamount, located between Madeira and the Portuguese coast, display a much more variable growth history. A pronounced increase in Ni, Cu, and Zn is observed in some intervals of the crusts, which probably reflects increased surface productivity. A thick older phosphatized generation occurs in many samples. Hydrographic profiles indicate that Mediterranean outflow water (MOW) may play an important role in the composition of these crusts.¹⁰Be dating of one sample confirms that the interruption of the MOW during the Messinian salinity crisis (6.2–5 Ma ago) resulted in changes in element composition. Sr-isotope dating of the apatite phase of the old crust generation has been carried out to obtain a minimum age for the older generation of Atlantic crusts and to determine whether crust phosphatization in the Atlantic can be related to phosphatization episodes recorded in Pacific crusts. The preliminary data show that the old phosphatized crust generation might be as old as approximately 30–40 Ma.     

Aeolian landscapes in central Australia: gypsiferous and quartz dune environments from Lake Amadeus

There are two different dune systems in central Australia; regional quartz dunefields and transverse gypsiferous dunes associated with playa lakes. These two systems, especially gypsiferous dunes at Lake Amadeus, the largest playa in central Australia, provide a sedimentary, geomorphological and environmental history of the region during the late Quaternary. The gypsifierous dunes consist of a surficial gypcrete overlying an aeolian sediment sequence below, a mixture of gypsum sand and quartz sand. No clay pellets have been found in the dune sequence, in significant contrast to the gypsiferous clay dunes in other parts of Australia. Three possible models of the environmental controls of gypsiferous dune formation are discussed. The most plausible one suggests simultaneous gypsum precipitation and deflation. Sandsized gypsum was precipitated in a groundwater-seepage zone around the playa margin during seasonally high water-tables and these crystals were deflated onto land during dry intervals, forming the marginal gypsiferous dunes. These processes require conditions of high regional water-table, strong climatic seasonality and probably a windier and overall wetter climate. At least two separate gypsiferous-duneforming episodes can be recognized. The age of formation of the younger one has been dated by thermoluminescence at 44–54 ka. The gypcrete crust capping the dunes is characterized by intergrown microcrystalline gypsum crystals, showing evidence of leaching, dissolution and recrystallization. It is interpreted as a pedogenic product formed during a stable period after accumulation of the gypsiferous dune. After the construction of the younger gypsiferous dune, there was a major episode of activation of regional quartz dunefields which formed thick quartz sand mantles overlying gypsiferous dunes on both playa margins and the dune islands within the playa. An equivalent aeolian sand layer was deposited within the playa. Soil structures in this unit indicate that the sand sheet over the playa was later colonized by vegetation. Activation of the regional dunefields suggests a major period of dry climate, which, although not dated, may correlate with the last glacial maximum identified as a period of maximum aridity from 25 to 18 ka at other sites in Australia.     

Distribution Characteristics of Cobalt-rich Ferromanganese Crust Resources on Submarine Seamounts in the Western Pacific

Based on the survey data of five submarine seamount provinces （chains） in the Western Pacific, the distribution characteristics of cobalt-rich ferromanganese crust resources have been researched in this paper by using the relative reference data and applying the theories of hotspot and seafloor spreading. The main research results obtained are as follows： The Co-rich crust thickness in the study area is gradually increasing from east to west and from south to north having a negative correlation （r = -0.59） with longitude and a positive correlation （r = 0.48） with latitude. The crust thickness varying along longitude and latitude is influenced by the hotspot and seafloor spreading. The oceanic crusts and seamounts in the northwest part of the study area are older, and the crust resources are superior to those in the southeast part. In the depth of 〈1500 m, 1500-2000 m, 2000-2500 m in the study area, the cobalt crust thickness is respectively 5.45 cm, 4.34 cm and 3.55 cm, and in the depth of 2500-3000 m and 3000-3500 m, it drops respectively to 2.84 cm and 3.37 cm. The Co-rich crust resources are mainly concentrated in the seamount summit margins and the upper flanks in the depth of 〈2500 m. There is a strong negative correlation （r = -0.67） between the cobalt crust abundance and the slope of the seamount, 75 kg/m^2 and 50 kg/mz at the slopes of 0°-20° and 20°-34° respectively. Cobalt crusts are mainly distributed in the parts whose slopes are less than 20°. It is consistent with the fractal result that the slope threshold of cobalt crust distribution is 19°, and slopes over 20° are not conducive to the crust growth. The cobalt crusts of high grade are mainly enriched in the region within 150°E-140°W and 30°S-30°N in the Pacific, where there are about 587 seamounts at the depth of 3500- 6000 m and over 30 Ma of the oceanic crusts. The perspective area rich in cobalt crust resources is about 41×104 km^2 and the resource quantity is approximately 27 billion tons.     

The aeolian sedimentation record of the Thar desert

A review of the aeolian sedimentary record of the Thar desert is presented. This includes a regional survey of the major dune forms, their genesis and their relationship to climate and other regional landforms. A key aspect of this work is the chronometry of the dunes using luminescence methods. Luminescence dating of sand has enabled quantification of the duration of the phases of sand aggradation and quiescence, time scales of dune migration and the dating of pedogenic carbonates. We demonstrate that the conventional wisdom of synchronicity of dune aggradation with glacial epoch is not true in the context of Thar sands and here only a short durationwindow of opportunity existed for dune aggradation. Luminescence ages further suggest that this window occurred during a transitional climatic regime from glacial to interglacial about 4–10 ka after the glacial epoch. Other inferences included are that:

Flow and sediment transport over large subaqueous dunes: Fraser River, Canada

Large symmetric and asymmetric dunes occur in the Fraser River, Canada. Symmetric dunes have stoss and lee sides of similar length, stoss and lee slope angles <8°, and rounded crests. Asymmetric dunes have superimposed small dunes on stoss sides, sharp crests, stoss sides longer than lee sides, stoss side slopes <3° and straight lee side slopes up to 19°. There is no evidence for lee side flow separation, although intermittent separated flow is possible, especially over asymmetric dunes. Dune symmetry and crest rounding of symmetric dunes are associated with high sediment transport rates. High near-bed velocity and bed load transport near dune crests result in crest rounding. Long, low-angle lee sides are produced by deposition of suspended sediment in dune troughs. Asymmetric dunes appear to be transitional features between large symmetric dunes and smaller dunes adjusted to lower flow velocity and sediment transport conditions. Small dunes on stoss sides reduce near-bed flow velocity and bed load transport, causing a sharper dune crest. Reduced deposition of suspended sediment in troughs results in a short, steep lee slope. Dunes in the Fraser River fall into upper plane bed or antidune stability fields on flume-based bedform phase diagrams. These diagrams are probably not applicable to large dunes in deep natural flows and care must be taken in modelling procedures that use phase diagram relations to predict bed configuration in such flows.     

An empirical model of aeolian dune lee-face airflow

Airflow data, gathered over dunes ranging from 60-m tall complex-crescentic dunes to 2-m tall simplecrescentic dunes, were used to develop an empirical model of dune lee-face airflow for straight-crested dunes. The nature of lee-face flow varies and was found to be controlled by the interaction of at least three factors (dune shape, the incidence angle between the primary wind direction and the dune brinkline and atmospheric thermal stability). Three types of lee-face flow (separated, attached and deflected along slope, or attached and undeflected) were found to occur. Separated flows, characterized by a zone of low-speed (0–3O% of crestal speed) back-eddy flow, typically occur leeward of steep-sided dunes in transverse flow conditions. Unstable atmospheric thermal stability also favours flow separation. Attached flows, characterized by higher flow speeds (up to 84% of crestal speed) that are a cosine function of the incidence angle, typically occur leeward of dunes that have a lower average lee slope and are subject to oblique flow conditions. Depending on the slope of the lee face, attached flow may be either deflected along slope (lee slopes greater than about 20°), or have the same direction as the primary flow (lee slopes less than about 20°). Neutral atmospheric thermal stability also favours flow attachment. As each of the three types of lee-face flow is defined by a range of wind speeds and directions, the nature of lee-face flow is intimately tied to the type of aeolian depositional process (i.e. wind ripple or superimposed dune migration, grainflow, or grainfall) that occurs on the lee slope and the resulting pattern of dune deposits. Therefore, the model presented in this paper can be used to enhance the interpretation of palaeowind regime and dune type from aeolian cross-strata.     

Plant distribution at the mobile dune scale and its relevance to soil properties and topographic features

A survey was conducted in an 11-year recovery mobile dune (RMD11) and a 20-year recovery mobile dune (RMD20), in Horqin Sandy Land, Northern China, to determine plant distribution at the mobile dune scale and its relevance to soil properties and topographic features. The results showed that (1) vegetation cover and species number increased from dune top to bottom in the restoration process of mobile dune; (2) the average value of soil organic C, total N, pH, relative height of sampling site, very fine sand content and soil water contents (40−60 and 60−80 cm) of RMD11 were less than that of RMD20, respectively, and there were significant differences (P < 0.05) between the two dunes; (3) soil resources were redistributed by shrub restoration and relative height of sampling site on dune. The distribution of sand pioneer plant, Agriophyllum squarrosum, was positively related to the relative height of sampling site and soil water content, while that of other herbaceous plants was positively related to soil nutrients in the restoration process of mobile dune. These results suggest that at mobile dune scale, plant distributions are determined by a combination of soil properties and topographic feature. Much effort should be made to preserve the interdune lowland and to improve the level of soil nutrients on mobile dune.     

Clay Dunes: Their occurrence,formation and environmental significance

Dunes which contain a large percentage of clay develop under restricted environmental conditions forming aceolian accumulation with distinctive sedimentary and morphologic characteristics. Along the margins of drying salt flats, sand-sized aggregates of clay minerals are formed by the efflorescence of salts or by the mechanical disintegration of mud curls. The resultant pellets, when blown to the vegetated margin, may be trapped and accumulate into a dune. With the onset of cool or moist conditions, the clays hygroscopically absorb moisture; the seasonal increment of pellets is thereby stabilised. This results in a low-angle, layer-by-layer addition over the dune surface producing parallel bedding different from that in more common aeolian deposits. The pellets travel on to the dune as a thin rippled layer; sand-slip faces rarely develop and so avalanche and cross-set bedding are usually absent. Topographically, clay dunes possess low-angle slopes (rarely exceeding 15°) the steeper of which usually forms the windward side. Because of rapid stabilisation, they do not migrate from the source but form transverse ridges following the salt-flat margin.Active clay dunes occur on the margins of coastal lagoons in Texas and on the west coast of Africa in Senegal, while inland occurrences are recorded from sebkha margins in Algeria. Inactive dunes occur widely throughout southern Australia on the eastern margins of Pleistocene lake basins. Their formation requires a combination of factors including; (1) the presence of a shallow saline water body with seasonally exposed marginal mud flats, and; (2) strong and preferably unidirectional winds coinciding with a hot dry season. Because these various factors must have coincided to permit their formation, relic clay dunes provide important evidence for reconstructing palaeo-environments.     

Spatial distribution characteristics of soil moisture in different types of sand dune in the Mu Us Sandy Land,adjacent to north of Chinese Loess Plateau

The distribution of soil moisture in arid and semiarid regions is a major environmental factor and is regulated by regional topography, vegetation and soil texture. Here, we present the results of a study of the spatial distribution characteristics of soil moisture in the Mu Us Sandy Land, which is the transitional area between the northwestern deserts and the Chinese Loess Plateau, in North China. Samples were taken from holes drilled to a depth of 4 m in 52 different microtopographic positions on different types of dune (bare dunes, shrub-covered dunes and tree-covered dunes). The sites were located in the northwestern margin, the central region and the southeastern margin. All samples were analyzed for moisture content and grain size distribution. The results show that: (1) for the same type of dune, the soil moisture content varies in different microtopographic positions. The soil moisture content on windward slopes is greater than on leeward slopes in the shrub-covered dunes and the tree-covered dunes, while this is the case in only some of the bare migratory sand dunes. In addition, the soil moisture content on leeward slopes is greater than on the corresponding windward slope. (2) The vegetation type and density have a large influence on the moisture content of sandy soils; specifically, the presence of shrubs and trees significantly affects the soil moisture content of windward and leeward slopes and the inter-dune lowland. (3) Soil moisture content is positively correlated with the clay and silt content of sandy soils. From northwest to southeast across the Mu Us Sandy Land, the silt and clay content increases gradually; however, in the case of dunes covered with planted trees, a peak in the content of fine-grained material occurs in the central region, while for shrub-covered sand dunes, the peak occurs in the southeastern margin. In addition, the correlation between soil moisture and soil grain size distribution of the three types of dunes varies from northwest to southeast. (4) The proportion of fine-grained material and the correlation between the content of fine-grained material and soil moisture are the two main factors influencing the soil moisture distribution of the different types of dune. A soil moisture concentration index can be used as a rough indicator of the distribution characteristics of soil moisture.     

Wind tunnel experiments of air flow patterns over nabkhas modeled after those from the Hotan River basin, Xinjiang, China (I): non-vegetated

A nabkha is a vegetated sand mound, which is typical of the aeolian landforms found in the Hotan River basin in Xinjiang, China. This paper compares the results of a series of wind tunnel experiments with an on-site field survey of nabkhas in the Hotan River basin of Xinjiang. Wind tunnel experiments were conducted on semi-spherical and conical sand mounds without vegetation or shadow dunes. Field mounds were 40 times as large as the size of the wind tunnel models. In the wind tunnel experiments, five different velocities from 6 to 14 m/s were selected and used to model the wind flow pattern over individual sand mound using clean air without additional sand. Changes in the flow pattern at different wind speeds resulted in changes to the characteristic structure of the nabkha surface. The results of the experiments for the semi-spherical sand mound at all wind velocities show the formation of a vortex at the bottom of the upwind side of the mound that resulted in scouring and deposition of a crescentic dune upwind of the main mound. The top part of the sand mound is strongly eroded. In the field, these dunes exhibited the same scouring and crescentic dune formation and the eroded upper surface was often topped by a layer of peat within the mound suggesting destroyed vegetation due to river channel migration or by possible anthropogenic forces such as fuel gathering, etc. Experiments for the conical mounds exhibit only a small increase in velocity on the upwind side of the mound and no formation of a vortex at the bottom of the upwind side. Instead, a vortex formed on the leeward side of the mound and overall, no change occurred in the shape of the conical mound. In the field, conical mounds have no crescentic dunes on the upwind side and no erosion at the top exposed below peat beds. Therefore, the field and laboratory experiments show that semi-spherical and conical sand mounds respond differently to similar wind conditions with different surface configuration and development of crescent-shaped upwind deposits when using air devoid of additional sediment. __________ Translated from Journal of Desert Research, 2007, 27(1): 9–14 [译自:中国沙漠]     

高寒冻土区生物结皮对土壤理化属性的影响

生物结皮是高寒地区地被层的重要组分之一。其作为地表特殊的结构层,能够改变地表结构及土壤理化属性,从而影响冻土环境。迄今为止,关于青藏高原高寒生态系统中生物结皮对土壤理化属性的影响尚不清楚。以青藏高原高寒冻土区生物结皮为研究对象,初步研究了生物结皮的特征及其对土壤理化属性的影响。结果表明：生物结皮在高寒草甸退化过程中广泛发育,主要以藻结皮为主,其盖度可达37.3%~51.7%,结皮层平均厚度为12.6 mm。由于生物结皮的发育,高寒地区5~20 cm土层粉粒含量有所增加,但差异不显著,而结皮层土壤田间持水量相比于裸地表层（2 cm）增加了10%~40%,结皮层容重较裸地降低了30%;两种类型藻结皮均显著增加了结皮层及其下0~20 cm土层土壤有机质,而深色藻结皮增加了结皮层及其下0~20 cm土层土壤全氮含量,浅色藻结皮仅增加了结皮层土壤全氮含量,对其下0~20 cm土层土壤全氮含量没有显著影响;生物结皮对土壤pH没有显著影响;生物结皮是高寒生态系统植被退化过程中的关键环节。研究结果为揭示生物结皮在高寒生态系统中发挥重要生态功能提供依据。     

荒漠地区生物土壤结皮的水文物理特征分析

通过室内压力陶土板系统测定土壤含水率与基质势的关系与Star-1土壤水分物理特征测定系统确定非饱和土壤水力传导度的方法,结合应用van Genuchten公式模拟,分析了位于腾格里沙漠东南缘包兰铁路沙坡头段人工生态防护体系生物土壤结皮的水文物理特征,确定了其水分特征曲线、非饱和土壤水力传导度、非饱和弥散系数,并与原始沙丘沙进行比较。结果表明,生物土壤结皮的持水能力是沙丘沙的3~9倍。当土壤基质势在-1~-3 000 cm的较高范围变化时,生物土壤结皮平均非饱和水力传导度低于沙丘沙(约为12%);而当土壤基质势在-3 000~-15 000 cm的较低范围变化时,沙丘沙的平均非饱和水力传导度又大大低于生物土壤结皮(约为91.0%)。正是由于生物土壤结皮特殊的质地与结构,使其非饱和水力传导度随着土壤基质势的降低,以及土壤含水量的减少,而趋于增大。与原始沙丘沙比较,生物土壤结皮独特的水文物理特点决定了它对荒漠地区土壤微生境的改善与促进作用,特别是通常情况下的高持水能力与低土壤基质势条件下的较高非饱和水力传导度,能够提高浅层土壤水分的有效性,有利于人工生态防护体系主要组分浅根系灌木、草本植物与小型土壤动物的生存繁衍。