Lithospheric evolution of the Andean fold–thrust belt, Bolivia, and the origin of the central Andean plateau

We combine geological and geophysical data to develop a generalized model for the lithospheric evolution of the central Andean plateau between 18° and 20° S from Late Cretaceous to present. By integrating geophysical results of upper mantle structure, crustal thickness, and composition with recently published structural, stratigraphic, and thermochronologic data, we emphasize the importance of both the crust and upper mantle in the evolution of the central Andean plateau. Four key steps in the evolution of the Andean plateau are as follows. 1) Initiation of mountain building by 70 Ma suggested by the associated foreland basin depositional history. 2) Eastward jump of a narrow, early fold–thrust belt at 40 Ma through the eastward propagation of a 200–400-km-long basement thrust sheet. 3) Continued shortening within the Eastern Cordillera from 40 to 15 Ma, which thickened the crust and mantle and established the eastern boundary of the modern central Andean plateau. Removal of excess mantle through lithospheric delamination at the Eastern Cordillera–Altiplano boundary during the early Miocene appears necessary to accommodate underthrusting of the Brazilian shield. Replacement of mantle lithosphere by hot asthenosphere may have provided the heat source for a pulse of mafic volcanism in the Eastern Cordillera and Altiplano at 24–23 Ma, and further volcanism recorded by 12–7 Ma crustal ignimbrites. 4) After 20 Ma, deformation waned in the Eastern Cordillera and Interandean zone and began to be transferred into the Subandean zone. Long-term rates of shortening in the fold–thrust belt indicate that the average shortening rate has remained fairly constant (8–10 mm/year) through time with possible slowing (5–7 mm/year) in the last 15–20 myr. We suggest that Cenozoic deformation within the mantle lithosphere has been focused at the Eastern Cordillera–Altiplano boundary where the mantle most likely continues to be removed through piecemeal delamination.     

Balanced cross-sections and their implications for the deep structure of the northwest Alps

The Mont Blanc massif is one of a chain of basement culminations which crop out along the external French Alps. Its southwestern margin is interpreted as being a major thrust belt which propagated in a piggy-back sequence towards the foreland. These imbricates have developed in the footwall of the high-level Valais thrust. The depth to the floor thrust and shortening within imbricates above this thrust are estimated by a series of partially balanced cross-sections drawn between the ‘synclinal median’ and the Valais thrust. These sections restore to a pre-thrust length of at least 50 km, probably exceeding 100 km, above a floor thrust never deeper than 1 km below the sub-Triassic unconformity. All this thrust displacement is transferred via a series of lateral branch lines onto the Mont Blanc thrust in the Chamonix area. A corollary of this is that the Aiguilles Rouges and the main part of the Mont Blanc massif were separated by probably as much as 100 km prior to Alpine thrusting. Such large shortening estimates imply a hitherto unsuspected Dauphinois stratigraphic consistency in both thickness and lithology.To achieve a balance a restored crustal cross-section must show an equal length of both lower and upper crust. Thus a high-level basal detachment which floors large thrust displacements must overlie a long, undeformed lower crustal wedge. A restored section 100 km long requires such a lower crustal wedge to exist beneath the entire Alpine internal zones. Perrier & Vialon's crustal velocity profile through the western Alps is reinterpreted in these terms. The Ivrea body is considered to be a portion of an external lower crustal wedge which has been uplifted by thrusts after most of the displacement on the external thrust belt.     

河北东北部兴隆煤田区逆冲构造的特征及其区域构造意义

兴隆煤田及邻区的逆冲构造系基底卷入变形的厚皮逆冲构造,并具有典型的断坪-断坡式几何学结构.断层上盘逆冲方向指向NNW,沿着主干逆冲断层发生的倾向位移量约为13.1 km,逆冲断层及相关褶皱变形所造成的局部表层地壳缩短率约32.3%.对兴隆逆冲构造的几何学结构、运动学性质及其地层效应的分析表明,在申家胡同到黄土梁近东西向一线以南的区域,寻找到因逆冲断层作用导致的隐伏煤田的可能性是极小的.主干逆冲断层上、下盘地层大面积陡立乃至倒转的特征,更容易用断展褶皱,尤其是三角形剪切断展褶皱模型做出合理解释.该逆冲构造主要逆冲断层的上、下盘盖层岩系不整合于基底结晶变质岩系之上,地层序列发育完整而且可以一一对应,不存在沿着相对软弱层发育的大规模逆冲断层之断坪,因此,将该逆冲构造作为区域上承德逆冲构造的根带是不合适的.     

Tectonics and crustal structures related to Bhuj earthquake of January 26, 2001: based on gravity and magnetic surveys constrained from seismic and seismological studies

Gravity and magnetic data of the Kachchh basin and surrounding regions have delineated major E–W and NW–SE oriented lineaments and faults, which are even extending up to plate boundaries in the north Arabian Sea and western boundary of the Indian plate, respectively. The epicentral zone of Bhuj earthquake and its aftershocks is located over the junction of Rann of Kachchh and median uplifts viz. Kachchh mainland and Wagad uplifts, which are separated by thrust faults. Gravity data with constraints from the results of the seismic studies along a profile suggest that the basement is uplifted towards the north along thrust faults dipping 40–60° south. Similarly gravity and magnetic modeling along a profile across Wagad uplift suggest south dipping (50–60°) basement contacts separating rocks of high susceptibility and density towards the north. One of these contacts coincides with the fault plane of the Bhuj earthquake as inferred from seismological studies and its projection on the surface coincides with the E–W oriented north Wagad thrust fault. A circular gravity high in contact with the fault in northern part of the Wagad uplift along with high amplitude magnetic anomaly suggests plug type mafic intrusive in this region. Several such gravity anomalies are observed over the island belt in the Rann of Kachchh indicating their association with mafic intrusions. The contact of these intrusives with the country rock demarcates shallow crustal inhomogeneities, which provides excellent sites for the accumulation of regional stress. A regional gravity anomaly map based on the concept of isostasy presents two centers of gravity lows of −11 to −13 mGal (10⁻⁵ m/s²) representing mass deficiency in the epicentral region. Their best-fit model constrained from the receiver function analysis and seismic refraction studies suggest crustal root of 7–8 km (deep crustal inhomogeneity) under them for a standard density contrast of −400 kg/m³. It is, therefore, suggested that significant amount of stress get concentrated in this region due to (a) buoyant crustal root, (b) regional stress due to plate tectonic forces, and (c) mafic intrusives as stress concentrators and the same might be responsible for the frequent and large magnitude earthquakes in this region including the Bhuj earthquake of January 26, 2001.     

The Laramide orogeny: Evidence from cocorp deep crustal seismic profiles in the wind river mountains, wyoming

Deep crustal reflection data that are critical for the interpretation of Laramide structure have been obtained by the Consortium for Continental Reflection Profiling (COCORP). The Laramide orogeny, which occurred from the late Cretaceous to early Eocene, is characterized in Wyoming by large uplifts of Precambrian basement, commonly flanked by reverse faults. The attitude of these faults at depth has been a major tectonic problem and is very important for deciding whether horizontal or vertical crustal movements were primarily responsible for the basement uplifts. COCORP has run 158 km of deep seismic reflection profiles (recording to 20-sec two-way travel time) across the southeastern end of the Wind River Mountains, the largest of these Laramide uplifts. Reflections from the thrust fault flanking the Wind River uplift can be clearly traced on the profiles to at least 24-km depth and possibly as deep as about 36 km with a fairly uniform apparent dip of 30°–35°. Other reflection events subparallel to the main Wind River thrust are present in the seismic profiles and may represent other faults. There is at least 21 km of crustal shortening along the thrust. There is no evidence in the reflection profiles for large-scale folding of the basement; the Wind River Mountains were formed predominantly by thrust movements. Gravity anomalies in the Wind River Mountains can be modeled by a thrust that displaces dense material in the lower crust. If the thrust ever cut the Moho, the effect is not observed in the gravity today. A proposed model for the presence of uplifted basement in Wyoming invokes a shallowly dipping, subducted Farallon plate beneath the North American continent; drag between the two plates localized compressional stresses in an area over 800 km into the North American plate causing large thrusts to develop. The earth's crust seems to have fractured as a fairly rigid plate     

Structure of the Patagonian Andes: Regional Balanced Cross Section at 50° S,Argentina

A 100 km long balanced structural transect is presented for the Patagonian Andes at 50° S Latitude. The area studied is characterized by a fold belt in the eastern Andean foothills and basement-involved thrusts in a western-basement thrust zone. The basement thrust zone exposes pre-Jurassic, polydeformed sedimentary and layered metamorphic rocks emplaced over Lower Cretaceous rocks above an E-vergent thrust located at the western end of the fold belt.

The fold belt is developed in a 3 km thick deformed Cretaceous–Paleogene sedimentary cover with few basement outcrops and scarce calc-alkaline magmatism. Cover structures related to shallow décollements have a N-S to NW-SE strike, with fold wavelengths from 1100 to 370 m in the east to 20 to 40 m in the west. However, long-wavelength basement-involved structures related to deeper décollements have a dominant N-S to NE-SW trend along the eastern and western parts of the fold belt. Field evidence showing different degrees of inversion of N-S–trending normal faults suggests that the orientation of the Cenozoic compressive basement structures was inherited partially from the original geometry of Mesozoic normal faults.

The deformation propagated toward the foreland in at least two events of deformation. The effects of Paleogene (Eocene?) compressive episode are observed in the western fold belt and a Neogene (Late Miocene) compressive episode is present in the eastern fold belt. Basement-involved structures typically refold older cover structures, producing a mixed thick and thin-skinned structural style. By retrodeforming a regional balanced cross section in the fold belt, a minimum late Miocene shortening of 35 km (26%) was calculated.     

Active faulting and seismicity along the Siculo–Calabrian Rift Zone (Southern Italy)

Southern Italy is dominated by extensional tectonics that in the Calabrian arc and Eastern Sicily produced the development of the Siculo–Calabrian Rift Zone (SCRZ). This zone is represented by a ≈ 370 km-long fault belt consisting of 10 to 50 km long distinct fault segments which extend both offshore and on land being also responsible of the crustal seismicity of this region. The geological and morphological observations indicate that the active normal faults of the SCRZ are characterized by throw-rates ranging from 0.7 to 3.1 mm/a. They accommodate an almost uniform horizontal extension-rate of about 3.0 mm/a along a WNW–ESE regional extension direction. Based on our field observations and following empirical relationships between magnitude and surface rupture length connections between large crustal earthquakes and distinct fault segments of the SCRZ have been also tentatively tested. Our data indicate moreover that the magnitudes (M) of the historical and instrumental earthquakes are consistent with the estimated values and that the geometry and kinematics of the fault segments and the related different crustal features of the SCRZ control the different seismic behaviours of adjacent portions of the active rift zone.     

天山东段推覆构造研究

本文概括性总结了天山东段大型推覆构造的基本特征。根据地质证据和同位素年龄,东天山存在早古生代末,晚古生代晚期和新生代三期推覆构造;根据推覆构造分布规律及构造背景,在平面上划分为五大推覆带、9个大型韧剪带;根据出露岩石的矿物变形相将东天山推覆构造划分为深、中深和浅三个深度层次;通过韧剪变形组构的观察分析,确定了多期韧性变形性质与运动方向。糜棱岩中超微构造、古应力及小构造变形缩短率测量统计,证明东天山推覆变形具有显著的地壳缩短增厚作用。新生代板块碰撞导致本区中新生代盆地基底向造山带A型俯冲,造山带向盆地推覆,其结果就构成了今日看到的镶嵌状盆地-山脉构造地貌景观。     

Seismic evidence for preservation of the Archean Uchi granite–greenstone belt by crustal-scale extension

In the westernmost Superior Province of Canada, the east–west alignment of granite–greenstone belts and the adjacent, highly deformed gneiss belts led to the first proposals that plate tectonics existed before 2.5 Ga ago, with the belts thrust against one another by east–west-oriented subduction zones. Here, we present seismic reflection data, which demonstrate that in this region the present juxtaposition of the Uchi granite–greenstone belt and the North Caribou gneiss terrane occurred along a late southeast-dipping extensional shear zone that extends from the surface into the lower crust. The preservation of the Uchi belt and probably the English River metasedimentary belt is directly related to their dropping along extensional shear zones, which limited subsequent erosion. The relative lateral transport of these greenstone rocks implies that they were neither derived from the immediately underlying crust, nor preserved by vertical crustal movements as might occur in the absence of plate tectonics. Extension may have been associated with the emplacement of mantle-derived magmas at 2700 Ma, which has been linked to slab break-off or lithospheric delamination, making the extension approximately coeval with local gold mineralisation. Since crustal-scale faults can facilitate the circulation of gold-bearing fluids, we suggest that greenstone rocks preserved in the hanging walls of syn- to post-accretion extensional shear zones may preferentially host Archean lode-gold deposits. In the westernmost Superior Province, our seismic observations imply that some of the late structures in the well-developed belts defined by surface mapping arose through the collapse of a collage of laterally accreted terranes.     

早期碰撞造山过程与板块构造：前寒武纪地质研究的机遇和挑战

普遍认为修正后的板块构造模式仍适用于新太古代地质研究，但是早期板块构造过程与后期有明显差异，包括陆块规模、造山带类型、碰撞造山过程等。典型碰撞造山带在地史上的初次形成具有划时代的构造演化意义，涉及典型板块构造初始发生过程、最早超级大陆拼合、威尔逊旋回及板块碰撞造山过程等方面。华北中部保留一条近南北向的碰撞造山带（2 600~2 500 Ma BP），保留特征的巨型复式褶皱、不同层次推覆构造、蛇绿岩混杂带等。围绕华北中部造山带及其25亿年重大构造热事件的研究，对认识华北早期构造演化及其超大陆再造具有重要意义，也是早期板块构造研究的关键突破口之一，开展其不同地壳层次构造变形及其前陆盆地的研究，将深化早期板块边界及其造山过程的科学认识。     

The Eocene Southern Vancouver Island Orocline — a response to seamount accretion and the cause of fold-and-thrust belt and extensional basin formation

A deflection of the fault controlled southwestern coastline of Vancouver Island suggests the presence of a minor orocline, with a Southern Crustal Block (south of Barkley Sound–Alberni Inlet) rotated 20° counterclockwise relative to a Northern Fixed Crustal Block about a pole of rotation located northeast of Port Alberni. In this paper two models of orocline development, one of pure block rotation and one of pure bending, are proposed. The predictions of these models are tested against available geological maps, structural orientation data, identified regions of extension and contraction, and paleomagnetic data. Structural orientation and paleomagnetic data are consistent with 18° of post-Late Cretaceous counter clockwise rotation of the Southern Crustal Block relative to the Northern Fixed Crustal Block. A southward increase in the magnitude of rotation evident in the structural orientation data argues for a model of bending. Both bending and block rotation models predict the development of a zone of contraction along the northeast margin of the Southern Crustal Block, coincident with the location of the Eocene Cowichan fold-and-thrust belt, that diminishes northward toward the pole of rotation. As predicted, the fold-and-thrust belt is characterized by a northerly decrease in the amount of shortening, from >30% at the south end of the thrust belt, to 0% shortening north of Port Alberni. The northerly decrease in shortening is complemented by a north to south change in structural style from cylindrical to conical folds, and finally to planar, undeformed strata. The model of block rotation predicts the presence of a zone of extension extending southwest from the zone of rotation, coincident with the location of Eocene extensional structures within Barkley Sound and with horst and graben structures in the offshore Eocene to Miocene Tofino basin. Extension is less than predicted by a model of pure block rotation and suggests that much of the oroclinal rotation was accommodated by bending. Timing constraints indicate that orocline development was coeval with, and resulted from, the Eocene accretion of seamounts of the Crescent terrane. These findings demonstrate that oroclinal orogeny, the buckling of a linear crustal beam about vertical axes of rotation, can significantly impact the geometry, structure and character of an orogenic belt, even where the buckles are minor (<20° of rotation).     

Basement control on oblique thrust sheet evolution: seismic imaging of the active deformation front of the Central Andes in Bolivia

In the area of the Bolivian Orocline, we examine the deformation pattern associated with the active development of a new thrust sheet. A dense grid of reprocessed 2-D seismic lines from hydrocarbon exploration industry is interpreted and a 3-D simplified structural and kinematic model is deduced. In the Boomerang Hills, onlapping Paleozoic and foredeep sediments are detached from the underlying S-dipping basement. They are thrust northeastwards by less than 2 km. Two zones can be differentiated along the Andean deformation front: (1) a W–E to NW–SE striking frontal segment of predominantly orthogonal shortening, comprising a thrust and anticline system; (2) a WSW–ENE striking lateral zone of oblique shortening within a complex system of thin-skinned strike–slip faults and minor folds. The deformation front always follows a pronounced edge in the topography of the top basement surface close to the boundary of the Paleozoic basin. The observed deformation pattern indicates intensified strain partitioning caused by the interaction of contraction direction and basement topography, which provides a near oblique ramp for the onlapping wedge of sediments. The SW–NE thrusting direction is divided into orthogonal and tangential components. These are accommodated by convergent and strike–slip structures, respectively, which sole into a common detachment horizon. The structural evolution of the new thrust sheet in the Bolivian Orocline is primarily controlled by the paleorelief of the Brazilian Shield because: (1) the shape of the basement affects the taper of the thrust wedge and localizes the deformation front and (2) small asperities in/close to the top of the basement promote fault localization. The coincidence of a relatively high basement position and a structural high of the Eastern Cordillera leads to the conclusion that the shape of the Brazilian Shield also controls the structural evolution of the pronounced eastern border of the Bolivian Orocline.     

Late Cenozoic deformation in the South Caspian region: effects of a rigid basement block within a collision zone

Active deformation in the South Caspian region demonstrates the enormous variation in kinematics and structural style generated where a rigid basement block lies within a collision zone. Rigid basement to the South Caspian Basin moves with a westward component relative both to stable Eurasia and Iran, and is beginning to subduct at its northern and western margins. This motion is oblique to the approximately north–south Arabia–Eurasia convergence, and causes oblique shortening to the south and northeast of the South Caspian Basin: thrusting in the Alborz and Kopet Dagh is accompanied by range-parallel strike–slip faults, which are respectively left- and right-lateral. There are also arcuate fold and thrust belts in the region, for two principal reasons. Firstly, weaker regions deform and wrap around the rigid block. This occurs at the curved transition zone between the Alborz and Talysh ranges, where thrust traces are concave towards the foreland. Secondly, a curved fold and thrust belt can link a deformation zone created by movement of the basement block to one created by the regional convergence: west-to-east thrusts in the eastern Talysh represent underthrusting of the South Caspian basement, but pass via an arcuate fan of fold trains into SSW-directed thrusts in the eastern Greater Caucasus, which accommodates part of the Arabia–Eurasia convergence. Each part of the South Caspian region contains one or more detachment levels, which vary dependent on the pre-Pliocene geology. Buckle folds in the South Caspian Basin are detached from older rocks on thick mid-Tertiary mudrocks, whereas thrust sheets in the eastern Greater Caucasus detach on Mesozoic horizons. In the future, the South Caspian basement may be largely eliminated by subduction, leading to a situation similar to Archaean greenstone belts of interthrust mafic and sedimentary slices surrounded by the roots of mountain ranges constructed from continental crust.     

Upper and middle crustal deformation of an arc–arc collision across Hokkaido, Japan, inferred from seismic refraction/wide-angle reflection experiments

The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.     

What drove late Mesozoic extension of the northern China–Mongolia tract?

The northern China–Mongolia tract exhibited a tectonic transition from contractional to extensional deformation in late Mesozoic time. Late Middle to early Late Jurassic crustal shortening is widely thought to have resulted from collision of an amalgamated North China–Mongolia block and the Siberian plate, but widespread late Late Jurassic–Early Cretaceous extension has not been satisfactorily explained by existing models. Some prominent features of the extensional tectonics of the northern China–Mongolia tract are: (1) Late Jurassic voluminous volcanism prior to Early Cretaceous large-magnitude rapid extension; (2) overlapping in time of contractional deformation in the Yinshan–Yanshan belt with development of extension-related basins in the interior of the northern China–Mongolia tract; and (3) widespread occurrence of alkali granitic plutonism, extensional basins and metamorphic core complexes in the Early Cretaceous. A new explanation is advanced in this study for this sequence of events. The collision of amalgamated North China–Mongolia with Siberia led to crustal overthickening of the northern China–Mongolia tract and formation of a high-standing plateau. Subsequent breakoff at depth of the north-dipping Mongol–Okhotsk oceanic slab is suggested as the main trigger for late Mesozoic lithospheric extension of that tract. Slab breakoff resulted in mantle lithospheric stretching of the adjacent northern China–Mongolia tract with subsequent ascent of hot asthenosphere and magmatic underplating at the base of the crust. Collectively, these phenomena triggered gravitational collapse of the previously thickened crust, leading to late Late Jurassic–Early Cretaceous crustal extension, and importantly, coeval contraction along the southern margin of the plateau in the Yinshan–Yanshan belt. The proposed model provides a framework for interpreting the spatial and temporal relationships of distinct processes and reconciling some seemingly contradictory phenomena, such as the synchronous extension of northerly terranes during major contraction in the neighboring Yanshan–Yinshan belt.     

Carboniferous convergence and subsequent crustal extension in the southern Schwarzwald (SW Germany)

Abstract

Detailed structural analysis in the southwestern part of the Variscan Sehwarzwald Massif (SW Germany) indicates polyphase, synmetamorphic deformation in ductile shear zones. The tectono-melainnrphir evolution is characterized by orogenic crustal shortening and subsequent late- orogenic crustal extension in Carboniferous times. Convergence is responsible for an KSK trending, north dipping thrust zone with intense deformation in orthogneissic S-C type mylonites Superposed on schistose and folded metasediments presumably lower Carboniferous in age. Southeastward thrust-’“g parallel to pervasive stretching lineation, similar to the pre-dominant oblique convergent structures ill the central part of the massif, is related to crustal stacking. Relations of early granite intrusions with the outlasting retrograde tectonics Point to a Lower Carboniferous (Late-Visean) age of shortening.

Subsequent crustal extension is indicated by a broad N-S trending and west dipping ductile shear zone within high grade meetamorphic (I1T7LP) gneisses. Retrograde stretching lineatone marked by sillimanite to chlorite anr consistent with a top-to-the-west shearing on the western flank of a large progressively warping domai structure. Intensely sheared and boudinaged granitic rocks are syn-tectonic and seal the age of extension at about 325 Ma (Lower/ Upper Carboniferous boundary). During progressively cataclastic stages of tectonic denudation the still active detachment controlled formation of an adjacent late Paleozoic (Stephano-Pcrniian) continental basin supersedding high-grade gneiss. As elsewhere in the Varisean belt, the late extensional process in the tectono-”“‘tainorphie evolution of the southern Sehwarzwald is related rapid uplift, exhumation and thinning by a gravitational collaps of a previously thickened crust.     

Seismic studies of the Brasília fold belt at the western border of the São Francisco Craton, Central Brazil, using receiver function, surface-wave dispersion and teleseismic tomography

The Tocantins Province in Central Brazil is composed of a series of SSW–NNE trending terranes of mainly Proterozoic ages, which stabilized in the Neoproterozoic in the final collision between the Amazon and São Francisco cratons. No previous information on crustal seismic properties was available for this region. Several broadband stations were used to study the regional patterns of crustal and upper mantle structure, extending the results of a recent E–W seismic refraction profile. Receiver functions and surface wave dispersion showed a thin crust (33–37 km) in the Neoproterozoic Magmatic Arc terrane. High average crustal Vp/Vs ratios (1.74–1.76) were consistently observed in this unit. The foreland domain of the Brasília foldbelt, on the other hand, is characterized by thicker crust (42–43 km). Low Vp/Vs ratios (1.70–1.72) were observed in the low-grade foreland fold and thrust zone of the Brasília belt adjacent to the São Francisco craton. Teleseismic P-wave tomography shows that the lithospheric upper mantle has lower velocities beneath the Magmatic Arc and Goiás Massif compared with the foreland zone of the belt and São Francisco craton. The variations in crustal thickness and upper mantle velocities observed with the broadband stations correlate well with the measurements along the seismic refraction profile. The integration of all seismic observations and gravity data indicates a strong lithospheric contrast between the Goiás Massif and the foreland domain of the Brasília belt, whereas little variation was found across the foldbelt/craton surface boundary. These results support the hypothesis that the Brasília foreland domain and the São Francisco craton were part of a larger São Francisco-Congo continental plate in the final collision with the Amazon plate.     

Cenozoic post-collisional brittle tectonic history and stress reorientation in the High Zagros Belt (Iran, Fars Province)

The Zagros fold-and-thrust belt of SW-Iran is among the youngest continental collision zones on Earth. Collision is thought to have occurred in the late Oligocene–early Miocene, followed by continental shortening. The High Zagros Belt (HZB) presents a Neogene imbricate structure that has affected the thick sedimentary cover of the former Arabian continental passive margin. The HZB of interior Fars marks the innermost part of SE-Zagros, trending NW–SE, that is characterised by higher elevation, lack of seismicity, and no evident active crustal shortening with respect to the outer (SW) parts. This study examines the brittle structures that developed during the mountain building process to decipher the history of polyphase deformation and variations in compressive tectonic fields since the onset of collision. Analytic inversion techniques enabled us to determine and separate different brittle tectonic regimes in terms of stress tensors. Various strike–slip, compressional, and tensional stress regimes are thus identified with different stress fields. Brittle tectonic analyses were carried out to reconstruct possible geometrical relationships between different structures and to establish relative chronologies of corresponding stress fields, considering the folding process. Results indicate that in the studied area, the main fold and thrust structure developed in a general compressional stress regime with an average N032° direction of σ₁ stress axis during the Miocene. Strike–slip structures were generated under three successive strike–slip stress regimes with different σ₁ directions in the early Miocene (N053°), late Miocene–early Pliocene (N026°), and post-Pliocene (N002°), evolving from pre-fold to post-fold faulting. Tensional structures also developed as a function of the evolving stress regimes. Our reconstruction of stress fields suggests an anticlockwise reorientation of the horizontal σ₁ axis since the onset of collision and a significant change in vertical stress from σ₃ to σ₂ since the late stage of folding and thrusting. A late right-lateral reactivation was also observed on some pre-existing belt-parallel brittle structures, especially along the reverse fault systems, consistent with the recent N–S plate convergence. However, this feature was not reflected by large structures in the HZB of interior Fars. The results should not be extrapolated to the entire Zagros belt, where the deformation front has propagated from inner to outer zones during the younger events.     

淮北夹沟—桃山集地区推覆构造研究

本区存在大型中生代推覆构造,所有震旦纪—古生代的沉积岩层都卷入了褶皱和断裂,构造推覆发生在较高构造部位,属脆性变形域,以台阶状逆断层和断层相关褶皱为特征。区内存在若干推覆构造,每个岩片均可分为上盘、下盘和滑动层系三部分,共查明8个滑动岩系。是一种发生在早中生代的盖层推覆,无根褶皱,也是徐宿地区最重要的控煤构造。最后对推覆构造的地球动力学机制进行了讨论。     

Structural evolution of the Tuscan Nappe in the southeastern sector of the Apuan Alps metamorphic dome (Northern Apennines,Italy)

Structural analysis carried out in the Tuscan Nappe (TN) in the southeastern sector of the Apuan Alps highlights a structural evolution much more complex than that proposed so far. The TN has been deformed by structures developed during four deformation phases. The three early phases resulted from a compressive tectonic regime linked to the construction of the Apenninic fold‐and‐thrust‐belt. The fourth phase, instead, is connected with the extensional tectonics, probably related to the collapse of the belt and/or to the opening of the Tyrrhenian Sea. Our structural and field data suggest the following. (1) The first phase is linked to the main crustal shortening and deformation of the Tuscan Nappe in the internal sectors of the belt. (2) The second deformation phase is responsible for the prominent NW–SE‐trending folds recognized in the study area (Mt. Pescaglino and Pescaglia antiforms and Mt. Piglione and Mt. Prana synforms). (3) The direction of shortening related to the third phase is parallel to the main structural trend of the belt. (4) The interference between the third folding phase and the earlier two tectonic phases could be related to the development of the metamorphic domes. The two directions of horizontal shortening induced buckling and vertical growth of the metamorphic domes, enhancing the process of exhumation of the metamorphic rocks. (5) The exhumation of the Tuscan Nappe occurred mostly in a compressive tectonic setting. A new model for the exhumation of the metamorphic dome of the Apuan Alps is proposed. Its tectonic evolution does not fit with the previously suggested core complex model, but is due to compressive tectonics. Copyright © 2004 John Wiley & Sons, Ltd.