Triassic mid-oceanic sedimentation in Panthalassa Ocean: Sambosan accretionary complex, Japan

Abstract   The Sambosan accretionary complex of southwest Japan was formed during the uppermost Jurassic to lowermost Cretaceous and consists of basaltic rocks, carbonates and siliceous rocks. The Sambosan oceanic rocks were grouped into four stratigraphic successions: (i) Middle Upper Triassic basaltic rock; (ii) Upper Triassic shallow-water limestone; (iii) limestone breccia; and (iv) Middle Middle Triassic to lower Upper Jurassic siliceous rock successions. The basaltic rocks have a geochemical affinity with oceanic island basalt of a normal hotspot origin. The shallow-water limestone, limestone breccia, and siliceous rock successions are interpreted to be sediments on the seamount-top, upper seamount-flank and surrounding ocean floor, respectively. Deposition of the radiolarian chert of the siliceous rock succession took place on the ocean floor in Late Anisian and continued until Middle Jurassic. Oceanic island basalt was erupted to form a seamount by an intraplate volcanism in Late Carnian. Late Triassic shallow-water carbonate sedimentation occurred at the top of this seamount. Accumulation of the radiolarian chert was temporally replaced by Late Carnian to Early Norian deep-water pelagic carbonate sedimentation. Biotic association and lithologic properties of the pelagic carbonates suggest that an enormous production and accumulation of calcareous planktonic biotas occurred in an open-ocean realm of the Panthalassa Ocean in Late Carnian through Early Norian. Upper Norian ribbon chert of the siliceous rock succession contains thin beds of limestone breccia displaced from the shallow-water buildup resting upon the seamount. The shallow-water limestone and siliceous rock successions are nearly coeval with one another and are laterally linked by displaced carbonates in the siliceous rock succession.     

Pre-accretionary mineralization of Japan

Abstract The metallogeny of Japan can be grouped into four environments: (1) Paleozoic-Mesozoic stratiform Cu and Mn deposits within accretionary complexes, (2) Cretaceous-Paleogene post-accretionary deposits related to felsic magmatism in a continental-margin are environment, (3) Miocene epigenetic and syngenetic deposits related to felsic magmatism during back-arc opening, and (4) late Miocene-Quaternary volcanogenic deposits in an island-are environment. Group (1) deposits were a major source of Cu and Mn for the Japanese mining industry, and this style of mineralization is reviewed here. The stratiform Cu and Mn deposits were formed on the sea floor during the late Paleozoic to Mesozoic, and were subsequently accreted to active continental margins mainly in Jurassic to Cretaceous age. The Cu sulfide deposits, termed Besshi type, are classified into two subtypes: the Besshi-subtype deposit is related to basaltic volcanism, probably at a mid-oceanic ridge or rise; the Hitachi subtype is related to bimodal volcanism, probably in a back-arc or continental rift. Most of the Besshisubtype deposits occur in the Sanbagawa metamorphic belt, with some occurrences in weakly metamorphosed Jurassic and Cretaceous accretionary terrains. This subtype is divided into two groups: the sediment-barren group is hosted by basalt-chert sequences; whereas the sedimentcovered group is hosted by basalt-shale sequences. Both subtypes are characterized by S isotope trends similar to those of sea-floor sulfide deposits now forming at mid-oceanic ridges. The Hitachi-subtype deposits occur in late Paleozoic volcanic-sedimentary sequences and lack pelagic sediments. These deposits are characterized by association of sphalerite- and barite-rich ores. The Mn deposits occur mainly in Middle Jurassic to Early Cretaceous accretionary complexes containing abundant chert beds of Triassic to Jurassic age. Their locations are well separated from those of the Cu sulfide deposits. The Mn deposits are divided into two types: the Mn type, hosted by chert, and the Fe-Mn type, sandwiched between chert and basaltic volcanic rocks. The Mn-type ores appear to have deposited on the deep-sea floor further from the site of hydrothermal activity than the Fe-Mn type. Primary Mn precipitates may have been transformed to rhodochrosite and other Mn-minerals during diagenesis. Many of the Mn deposits were significantly metamorphosed during intrusion of Cretaceous granitoids, resulting in a very complex mineralogy.     

Jurassic accretion tectonics of Japan

Abstract The Jurassic accretionary complex and coeval granites in Japan represent remnants of the Jurassic arc-trench system developed between the Asian continent and Pacific Ocean. The Jurassic accretionary complex occurs as a large-scale nappe that is tectonically sandwiched between the overlying pre-Jurassic nappes and underlying post-Jurassic nappes. By virtue of new research styles (microfossil mapping and chronometric mapping) the following new views of the Jurassic accretionary complex in Japan, that suggest those for on-land exposed ancient accretionary complexes in general, have been obtained: (i) the accretion age of the Jurassic accretionary complex ranges over ～ 80 million years from the latest Triassic to earliest Cretaceous according to a reconstructed stratigraphy of component rocks (oceanic plate stratigraphy); (ii) the accretionary complex is subdivided into several nappe units, each characterized by unique oceanic plate stratigraphy; (iii) a tectonically downward-younging polarity is observed in the piled nappes; (iv) the Jurassic accretionary complex is composed of coherent-type and chaotic-type units, the former retaining the primary accretionary structures while the latter are characterized by collapsed and secondarily mixed materialslfabrics derived from the former; (v) the chaotic-type units predominate in volume over the coherent-type units; (vi) the accretionary complex suffered from a regional low-grade metamorphism (up to the lower greenschist facies) within ～10–20 million years after the accretion timing; and (vii) the lateral extent of the Jurassic accretionary complex in East Asia is intermittently traced from the Koryak mountains in Russia to North Palawan in the west Philippines for ～6000 km. Discussion focuses on (i) the low preservation ratio of the coherent-type units to the chaotic-type units with respect to frequent subduction erosion by seamount subduction; (ii) absence of the Franciscan-type melange, suggesting sedimentary mixing origin for the chaotic-type unit; (iii) a growth rate of the Jurassic accretionary complex compatible to modern analogues; and (iv) the total volume of the Jurassic accretionary complex in Japan with respect to the most likely terrigeiious elastics source along the 250 Ma continent-continent collision suture in central China (between the Sino-Korean and Yangtze blocks).     

Age and petrogenesis of plagiogranite intrusions in the Ankara mélange, central Turkey

Abstract   The Ankara mélange within the Izmir–Ankara–Erzincan suture zone in north-central Turkey includes ophiolitic fragments that represent the remnants of an oceanic basement evolved between the Sakarya and Kirsehir continental blocks in the early Mesozoic. The serpentinized upper mantle peridotites and lower crustal rocks in these ophiolites are cross-cut by dolerite and plagiogranite dykes, which show mutually intrusive relations indicating their synchronous emplacement into the pre-existing oceanic lithosphere. Zircon dating (U–Pb) of a plagiogranite dyke has revealed a concordia age of ∼179 ± 15 Ma that is interpreted here as the crystallization age of this differentiated rock. A fourth fraction of the zircon separates from this rock has also shown an inherited component greater than 1.7 Ga, possibly derived from the Precambrian core of the Rhodope–Strandja Metamorphic Massif in the Balkan Peninsula. Models for plagiogranite formation were tested and it is concluded that a high extent (<70%) of anhydrous or water-undersaturated, early amphibole-free fractionation of a basaltic melt source may have readily produced the observed REE concentrations for the Ankara mélange plagiogranites. The trace element abundances and other geochemical features of the coeval dolerite dykes are similar to those of the plagiogranites, suggesting a common melt source. The Ta–Nb patterns shown by both the plagiogranite and dolerite dykes are typical of arc-related petrogenesis and can be explained by the addition of slab-derived components to a depleted mantle wedge. The Early Jurassic ophiolitic basement and the dyke intrusions were formed in a back-arc setting between the Paleo- and Neo-Tethyan domains in the eastern Mediterranean region. The Izmir–Ankara–Erzincan Sea developed in this back-arc environment and the related suture zone had a diachronous evolutionary history.     

Metamorphism and metamorphic K–Ar ages of the Mesozoic accretionary complex in Northland, New Zealand

Abstract A southwest dipping Mesozoic accretionary complex, which consists of tectonically imbricated turbiditic mudstone and sandstone, hemipelagic siliceous mudstone, and bedded cherts and basaltic rocks of pelagic origin, is exposed in northern North Island, New Zealand. Interpillow limestone is sometimes contained in the basaltic rocks. The grade of subduction‐related metamorphism increases from northeast to southwest, indicating an inverted metamorphic gradient dip. Three metamorphic facies are recognized largely on the basis of mineral parageneses in sedimentary and basaltic rocks: zeolite, prehnite‐pumpellyite and pumpellyite‐actinolite. From the apparent interplanar spacing d₀₀₂ data for carbonaceous material, which range from 3.642 to 3.564 Å, the highest grade of metamorphism is considered to have attained only the lowermost grade of the pumpellyite‐actinolite facies for which the highest temperature may be approximately 300°C. Metamorphic white mica K–Ar ages are reported for magnetic separates and <2 µm hydraulic elutriation separates from 27 pelitic and semipelitic samples. The age data obtained from elutriation separates are approximately 8 m.y. younger, on average, than those from magnetic separates. The age difference is attributed to the possible admixture of nonequilibrated detrital white mica in the magnetic separates, and the age of the elutriation separates is considered to be the age of metamorphism. If the concept, based on fossil evidence, of the subdivision of the Northland accretionary complex into north and south units is accepted, then the peak age of metamorphism in the north unit is likely to be 180–130 Ma; that is, earliest Middle Jurassic to early Early Cretaceous, whereas that in the south unit is 150–130 Ma; that is, late Late Jurassic to early Early Cretaceous. The age cluster for the north unit correlates with that of the Chrystalls Beach–Taieri Mouth section (uncertain terrane), while the age cluster for the south unit is older than that of the Younger Torlesse Subterrane in the Wellington area, and may be comparable with that of the Nelson and Marlborough areas (Caples and Waipapa terranes).     

Origin of the Kunlun Mountains by arc-arc and arc-continent collisions

Abstract The Kunlun Mountains were formed by early Mesozoic arc-arc and arc-continent collisions. The Middle Kunlun Are was the outer volcanic arc of the Paleozoic Asiatic continent, and the arc-related magmatic activities from the Proterozoic to Mesozoic are recorded by numerous volcanic and plutonic rocks of the area. Several back-arc basins and relic arcs exist north of the arc and the north Kunlun arc is one of these. The Kudi mélange of Kunlun was formed in a south-dipping subduction zone when the basin between the north and middle Kunlun arcs was consumed by the process of back-arc basin collapse, and the ophiolite mélange marked the suture zone where the two arcs collided. The Mazar mélange was formed in the north-dipping subduction zone under the middle Kunlun arc, and the mélange marks the main Paleotethys suture where the Qogir-Karamilan rocks of the Qangtang block (a fragment of Gondwanaland) is sutured on to Laurentia. The geology of Kunlun emphasizes the importance of arc-arc and arc-continent collisions in mountain-building processes.     

Tectonic implications of new age data for the Meratus Complex of south Kalimantan, Indonesia

Cretaceous subduction complexes surround the southeastern margin of Sundaland in Indonesia. They are widely exposed in several localities, such as Bantimala (South Sulawesi), Karangsambung (Central Java) and Meratus (South Kalimantan).
The Meratus Complex of South Kalimantan consists mainly of mélange, chert, siliceous shale, limestone, basalt, ultramafic rocks and schists. The complex is uncomformably covered with Late Cretaceous sedimentary-volcanic formations, such as the Pitap and Haruyan Formations.
Well-preserved radiolarians were extracted from 14 samples of siliceous sedimentary rocks, and K–Ar age dating was performed on muscovite from 6 samples of schist of the Meratus Complex. The radiolarian assemblage from the chert of the complex is assigned to the early Middle Jurassic to early Late Cretaceous. The K–Ar age data from schist range from 110 Ma to 180 Ma. Three samples from the Pitap Formation, which unconformably covers the Meratus Complex, yield Cretaceous radiolarians of Cenomanian or older.
These chronological data as well as field observation and petrology yield the following constraints on the tectonic setting of the Meratus Complex.
(1) The mélange of the Meratus Complex was caused by the subduction of an oceanic plate covered by radiolarian chert ranging in age from early Middle Jurassic to late Early Cretaceous.
(2) The Haruyan Schist of 110–119 Ma was affected by metamorphism of a high pressure–low temperature type caused by oceanic plate subduction. Some of the protoliths were high alluminous continental cover or margin sediments. Intermediate pressure type metamorphic rocks of 165 and 180 Ma were discovered for the first time along the northern margin of the Haruyan Schist.
(3) The Haruyan Formation, a product of submarine volcanism in an immature island arc setting, is locally contemporaneous with the formation of the mélange of the Meratus Complex.     

Late Paleocene–middle Miocene pelagic sequences in the Boso Peninsula, Japan: New light on northwest Pacific tectonics

Late Paleocene–middle Miocene pelagic limestone/chert sequences from the Mineoka Tectonic Belt, Boso Peninsula, central Japan, were biostratigraphically studied for planktic foraminifer fossils for the first time. The rock units are included as several isolated blocks tectonically within the ophiolitic mélange together with the Mio-Pliocene Honshu arc-derived terrigenous and Izu Arc-derived volcaniclastic materials. The pelagic sequences are grouped into the newly proposed Kamogawa Group which is subdivided into the Paleocene Nishi Formation, Eocene–Oligocene Heguri-Naka Limestone and early–middle Miocene Shirataki and Heguri Formations. This study of Kamogawa Group pelagic sequences throws new light on tectonic modeling of plate accretion to the unique trench–trench–trench (TTT)-type triple junction area off the Boso Peninsula. Different formations of the Kamogawa Group have different tectonic and paleogeographic significances for the oceanic plate with a seamount that was approaching the Izu and Honshu arcs during Pacific plate subduction, and that was accreted to the Honshu Arc during the middle Miocene.     

Petrogenesis and tectonomagmatic significance of volcanic and subvolcanic rocks in the Albanide–Hellenide ophiolitic mélanges

Abstract Ophiolitic mélanges associated with ophiolitic sequences are wide spread in the Mirdita–Subpelagonian zone (Albanide–Hellenide Orogenic Belt) and consist of tectonosedimentary ‘block‐in‐matrix‐type’ mélanges. Volcanic and subvolcanic basaltic rocks included in the main mélange units are studied in this paper with the aim of assessing their chemistry and petrogenesis, as well as their original tectonic setting of formation. Basaltic rocks incorporated in these mélanges include (i) Triassic transitional to alkaline within‐plate basalts (WPB); (ii) Triassic normal (N‐MORB) and enriched (E‐MORB) mid‐oceanic ridge basalts; (iii) Jurassic N‐MORB; (iv) Jurassic basalts with geochemical characteristics intermediate between MORB and island arc tholeiites (MORB/IAT); and (v) Jurassic boninitic rocks. These rocks record different igneous activities, which are related to the geodynamic and mantle evolution through time in the Mirdita–Subpelagonian sector of the Tethys. Mélange units formed mainly through sedimentary processes are characterized by the prevalence of materials derived from the supra‐subduction zone (SSZ) environments, whereas in mélange units where tectonic processes prevail, oceanic materials predominate. In contrast, no compositional distinction between structurally similar mélange units is observed, suggesting that they may be regarded as a unique mélange belt extending from the Hellenides to the Albanides, whose formation was largely dominated by the mechanisms of incorporation of the different materials. Most of the basaltic rocks surfacing in the MOR and SSZ Albanide–Hellenide ophiolites are incorporated in mélanges. However, basalts with island arc tholeiitic affinity, although they are volumetrically the most abundant ophiolitic rock types, have not been found in mélanges so far. This implies that the rocks forming the main part of the intraoceanic arc do not seem to have contributed to the mélange formation, whereas rocks presumably formed in the forearc region are largely represented in sedimentary‐dominated mélanges. In addition, Triassic E‐MORB, N‐MORB and WPB included in many mélanges are not presently found in the ophiolitic sequences. Nonetheless, they testify to the existence throughout the Albanide–Hellenide Belt of an oceanic basin since the Middle Triassic.     

Buruanga peninsula and Antique Range: Two contrasting terranes in Northwest Panay,Philippines featuring an arc–continent collision zone

Alternating chert–clastic sequences juxtaposed with limestone blocks, which are units typical of accretionary complexes, constitute the Buruanga peninsula. New lithostratigraphic units are proposed in this study: the Unidos Formation (Jurassic chert sequence), the Saboncogon Formation (Jurassic siliceous mudstone–terrigenous mudstone and quartz‐rich sandstone), the Gibon Formation (Jurassic(?) bedded pelagic limestone), the Libertad Metamorphics (Jurassic–Cretaceous slate, phyllite, and schist) and the Buruanga Formation (Pliocene–Pleistocene reefal limestone). The first three sedimentary sequences in the Buruanga peninsula show close affinity with the ocean plate stratigraphy of the North Palawan terrane in Busuanga Island: Lower–Middle Jurassic chert sequences overlain by Middle–Upper Jurassic clastics, juxtaposed with pelagic limestone. Moreover, the JR5–JR6 (Callovian to Oxfordian) siliceous mudstone of the Saboncogon Formation in the Buruanga peninsula correlates with the JR5–JR6 siliceous mudstone of the Guinlo Formation in the Middle Busuanga Belt. These findings suggest that the Buruanga peninsula may be part of the North Palawan terrane. The rocks of the Buruanga peninsula completely differ from the Middle Miocene basaltic to andesitic pyroclastic and lava flow deposits with reefal limestone and arkosic sandstone of the Antique Range. Thus, the previously suggested boundary between the Palawan microcontinental block and the Philippine Mobile Belt in the central Philippines, which is the suture zone between the Buruanga peninsula and the Antique Range, is confirmed. This boundary is similarly considered as the collision zone between them.     

Underplating of mélange evidenced by the depositional ages: U–Pb dating of zircons from the Shimanto accretionary complex, southwest Japan

Abstract   Growth of an accretionary prism is effected by frontal accretion and deep subsurface underplating at the base of the prism. A systematic oceanward and structurally downward younging of underplated sequences is expected as the prism thickens and grows. To test this hypothesis and explore the processes of underplating, the U–Pb ages of zircon grains contained in underplated mélange sequences or packages of the Late Cretaceous and early Paleogene accretionary complex of the Shimanto Belt, southwest Japan, were determined using LA–ICP–MS laser technology. The results document systematic but intermittent younging ages within a single underplated mélange package. This finding suggests that underplating took place episodically during a period of several million years and that between episodes of underplating, a large amount of sediment was subducted to depths much greater than where underplating was occurring.     

Transpressional tectonics of the Mineoka Ophiolite Belt in a trench–trench–trench-type triple junction, Boso Peninsula, Japan

Abstract   Structures developed in metamorphic and plutonic blocks that occur as knockers in the Mineoka Ophiolite Belt in the Boso Peninsula, central Japan, were analyzed. The aim was to understand the incorporation processes of blocks of metamorphic and plutonic rocks with an arc signature into the serpentinite mélange of the Mineoka Ophiolite Belt in relation to changes in metamorphic conditions during emplacement. Several stages of deformation during retrogressive metamorphism were identified: the first faulting stage had two substage shearing events (mylonitization) under ductile conditions inside the crystalline blocks in relatively deeper levels; and the second stage had brittle faulting and brecciation along the boundaries between the host serpentinite bodies in relatively shallower levels (zeolite facies). The first deformation occurred during uplift before emplacement. The blocks were intensively sheared by the first deformation event, and developed numerous shear planes with spacing of a few centimeters. The displacement and width of each shear plane were a few centimeters and a few millimeters, respectively, at most. In contrast, the fault zone of the second shearing stage reached a few meters in width and developed during emplacement of the Mineoka Ophiolite. Both stages occurred under a right-lateral transpressional regime, in which thrust-faulting was associated with strike-slip faulting. Such displacement on an outcrop scale is consistent with the present tectonics of the Mineoka Belt. This implies that the same tectonic stress has been operating in the Boso trench–trench–trench-type triple junction area in the northwest corner of the Pacific since the emplacement of the Mineoka Ophiolite. The Mineoka Ophiolite Belt must have worked as a forearc sliver fault during the formation of a Neogene accretionary prism further south.     

Subduction history of the Paleo-Pacific slab beneath Eurasian continent: Mesozoic-Paleogene magmatic records in Northeast Asia

This paper presents a review on the rock associations, geochemistry, and spatial distribution of Mesozoic-Paleogene igneous rocks in Northeast Asia. The record of magmatism is used to evaluate the spatial-temporal extent and influence of multiple tectonic regimes during the Mesozoic, as well as the onset and history of Paleo-Pacific slab subduction beneath Eurasian continent. Mesozoic-Paleogene magmatism at the continental margin of Northeast Asia can be subdivided into nine stages that took place in the Early-Middle Triassic, Late Triassic, Early Jurassic, Middle Jurassic, Late Jurassic, early Early Cretaceous, late Early Cretaceous, Late Cretaceous, and Paleogene, respectively. The Triassic magmatism is mainly composed of adakitic rocks, bimodal rocks, alkaline igneous rocks, and A-type granites and rhyolites that formed in syn-collisional to post-collisional extensional settings related to the final closure of the Paleo-Asian Ocean. However, Triassic calc-alkaline igneous rocks in the Erguna-Xing’an massifs were associated with the southward subduction of the Mongol-Okhotsk oceanic slab. A passive continental margin setting existed in Northeast Asia during the Triassic. Early Jurassic calc-alkaline igneous rocks have a geochemical affinity to arc-like magmatism, whereas coeval intracontinental magmatism is composed of bimodal igneous rocks and A-type granites. Spatial variations in the potassium contents of Early Jurassic igneous rocks from the continental margin to intracontinental region, together with the presence of an Early Jurassic accretionary complex, reveal that the onset of the Paleo- Pacific slab subduction beneath Eurasian continent occurred in the Early Jurassic. Middle Jurassic to early Early Cretaceous magmatism did not take place at the continental margin of Northeast Asia. This observation, combined with the occurrence of low-altitude biological assemblages and the age population of detrital zircons in an Early Cretaceous accretionary complex, indicates that a strike-slip tectonic regime existed between the continental margin and Paleo-Pacific slab during the Middle Jurassic to early Early Cretaceous. The widespread occurrence of late Early Cretaceous calc-alkaline igneous rocks, I-type granites, and adakitic rocks suggests low-angle subduction of the Paleo-Pacific slab beneath Eurasian continent at this time. The eastward narrowing of the distribution of igneous rocks from the Late Cretaceous to Paleogene, and the change from an intracontinental to continental margin setting, suggest the eastward movement of Eurasian continent and rollback of the Paleo- Pacific slab at this time.     

Ophiolites of the Eastern Peninsulas zone (Eastern Kamchatka): Age, composition, and geodynamic diversity

Abstract   The geological, geochemical and mineralogical data of dismembered ophiolites of various ages and genesis occurring in accretionary piles of the Eastern Peninsulas of Kamchatka enables us to discriminate three ophiolite complexes: (i) Aptian–Cenomanian complex: a fragment of ancient oceanic crust, composed of tholeiite basalts, pelagic sediments, and gabbroic rocks, presently occurring in a single tectonic slices (Afrika complex) and in olistoplaques in Pikezh complex of the Kamchatsky Mys Peninsula and probably in the mélange of the Kronotsky Peninsula; (ii) Upper Cretaceous complex, composed of highly depleted peridotite, gabbro and plagiogranite, associated with island arc tholeiite, boninite, and high-alumina tholeiitic basalt of supra-subduction origin; and (iii) Paleocene–Early Eocene complex of intra-island arc or back-arc origin, composed of gabbros, dolerites (sheeted dykes) and basalts produced from oceanic tholeiite melts, and back-arc basin-like dolerites. Formation of the various ophiolite complexes is related to the Kronotskaya intra-oceanic volcanic arc evolution. The first ophiolite complex is a fragment of ancient Aptian–Cenomanian oceanic crust on which the Kronotskaya arc originated. Ophiolites of the supra-subduction zone affinity were formed as a result of repeated partial melting of peridotites in the mantle wedge up to the subduction zone. This is accompanied by production of tholeiite basalts and boninites in the Kamchatsky Mys segment and plagioclase-bearing tholeiites in the Kronotsky segment of the Kronotskaya paleoarc. The ophiolite complex with intra-arc and mid-oceanic ridge basalt geochemical characteristics was formed in an extension regime during the last stage of Kronotskaya volcanic arc evolution.     

Geological and mineralogical study of eclogite and glaucophane schists in the Naga Hills Ophiolite,Northeast India

A variety of low‐ to high‐pressure metamorphic assemblages occur in the metabasic rocks and metachert in the Upper Cretaceous–Eocene ophiolite belt of the central part of the Naga Hills, an area in the northern sector of the Indo–Myanmar Ranges in the Indo–Eurasian collision zone. The ophiolite suite includes peridotite tectonite containing garnet lherzolite xenoliths, layered ultramafic–mafic cumulates, metabasic rocks, basaltic lava, volcaniclastics, plagiogranite, and pelagic sediments emplaced as dismembered and imbricated bodies at thrust contacts between moderately metamorphosed accretionary rocks/basement (Nimi Formation/Naga Metamorphics) and marine sediments (Disang Flysch). It is overlain by coarse clastic Paleogene sediments of ophiolite‐derived rocks (Jopi/Phokphur Formation). The metabasic rocks, including high‐grade barroisite/glaucophane‐bearing epidote eclogite and glaucophane schist, and low‐grade greenschist and prehnite–clinochlore schist, are associated with lava flows and ultramafic cumulates at the western thrust contact. Chemically, the metabasites show a low‐K tholeiitic affinity that favors derivation from a depleted mantle source as in the case of mid‐ocean ridge basalt. Thermobarometry indicates peak P–T conditions of about 20 kb and 525°C. Retrogression related to uplift is marked by replacement of barroisite and omphacite by glaucophane followed by secondary actinolite, albite, and chlorite formation. A metabasic lens with an eclogite core surrounded by successive layers of glaucophane schist and greenschist provides field evidence of retrogression and uplift. Presence of S‐C mylonite in garnet lherzolite and ‘mica fish’ in glaucophane schist indicates ductile deformation in the shear zone along which the ophiolite was emplaced.     

Detrital heavy minerals from Lower Jurassic clastic rocks in the Joetsu area,central Japan: Paleo‐Mesozoic tectonics in the East Asian continental margin constrained by limited chloritoid occurrences in Japan

Detrital chloritoids were extracted from the Lower Jurassic sandstones in the Joetsu area of central Japan. The discovery of detrital chloritoids in the Joetsu area, in addition to two previous reports, confirms their limited occurrence in the Jurassic strata of the Japanese islands. This finding emphasizes the importance of the denudation of chloritoid‐yielding metamorphic belts in Jurassic provenance evolution, in addition to a change from an active volcanic arc to a dissected arc that has already been described. Possible sources for the detrital chloritoids from the Jurassic sandstones are the Permo–Triassic chloritoid‐yielding metamorphic rocks distributed in dispersed tectonic zones (Hida, Unazuki, Ryuhozan and Hitachi Metamorphic Rocks), which are in fault contact with Permian to Jurassic accretionary complexes in the Japanese islands. This is because all of these pre‐Jurassic chloritoid‐yielding metamorphic rocks have a Carboniferous–Permian depositional age and a Permo–Triassic metamorphic age, whereas a Permian–Triassic metamorphic age on the Hitachi Metamorphic Rocks remains unreported. In addition, most metamorphic chloritoids imply a former stable land surface that has evolved into an unstable orogenic area. Therefore, the chloritoid‐yielding metamorphic rocks might form a continuous metamorphic belt originating from a passive continental margin in East Asia. Evidence from paleontological and petrological studies indicates that the Permo–Triassic metamorphic belt relates to a collision between the Central Asian Orogenic Belt and the North China Craton. The evolution of the Permian–Jurassic provenance of Japanese detrital rocks indicates that the temporal changes in detritus should result from sequences of collision‐related uplifting processes.     

Geological relationship between Anyui Metamorphic Complex and Samarka terrane,Far East Russia

The Anyui Metamorphic Complex (AMC) of Cretaceous age is composed of metachert, schist, gneiss, migmatite and ultramafic rocks, and forms a dome structure within the northernmost part of the Jurassic accretionary complex of the Samarka terrane. The two adjacent geological units are bounded by a fault, but the gradual changes of grain size and crystallinity index of quartz in chert and metachert of the Samarka terrane and the AMC, together with the gradual lithological change, indicate that at least parts of the AMC are metamorphic equivalents of the Samarka rocks. Radiolarian fossils from siliceous mudstone of the Samarka terrane indicates Tithonian age (uppermost Jurassic), and hence, form a slightly later accretion. This signifies that the accretionary complex in the study area is one of the youngest tectonostratigraphic units of the Samarka terrane. The relationship between the Samarka terrane and AMC, as well as their ages and lithologies, are similar to those of the Tamba–Mino–Ashio terrane and Ryoke Metamorphic Complex in southwest Japan. In both areas the lower (younger) part of the Jurassic accretionary complexes were intruded and metamorphosed by Late Cretaceous granitic magma. Crustal development of the Pacific‐type orogen has been achieved by the cycle of: (i) accretion of oceanic materials and turbidites derived from the continent; and (ii) granitic intrusion by the next subduction and accretion events, accompanied by formation of high T/P metamorphic complexes.     

Detrital zircon multi‐chronology,provenance, and low‐grade metamorphism of the Cretaceous Shimanto accretionary complex,eastern Shikoku,Southwest Japan: Tectonic evolution in response to igneous activity within a subduction zone

Detrital zircon multi‐chronology combined with provenance and low‐grade metamorphism analyses enables the reinterpretation of the tectonic evolution of the Cretaceous Shimanto accretionary complex in Southwest Japan. Detrital zircon U–Pb ages and provenance analysis defines the depositional age of trench‐fill turbidites associated with igneous activity in provenance. Periods of low igneous activity are recorded by youngest single grain zircon U–Pb ages (YSG) that approximate or are older than the depositional ages obtained from radiolarian fossil‐bearing mudstone. Periods of intensive igneous activity recorded by youngest cluster U–Pb ages (YC1σ) that correspond to the younger limits of radiolarian ages. The YC1σ U–Pb ages obtained from sandstones within mélange units provide more accurate younger depositional ages than radiolarian ages derived from mudstone. Determining true depositional ages requires a combination of fossil data, detrital zircon ages, and provenance information. Fission‐track ages using zircons estimated YC1σ U–Pb ages are useful for assessing depositional and annealing ages for the low‐grade metamorphosed accretionary complex. These new dating presented here indicates the following tectonic history of the accretionary wedge. Evolution of the Shimanto accretionary complex from the Albian to the Turonian was caused by the subduction of the Izanagi plate, a process that supplied sediments via the erosion of Permian and Triassic to Early Jurassic granitic rocks and the eruption of minor amounts of Early Cretaceous intermediate volcanic rocks. The complex subsequently underwent intensive igneous activity from the Coniacian to the early Paleocene as a result of the subduction of a hot and young oceanic slab, such as the Kula–Pacific plate. Finally, the major out‐of‐sequence thrusts of the Fukase Fault and the Aki Tectonic Line formed after the middle Eocene, and this reactivation of the Shimanto accretionary complex as a result of the subduction of the Pacific plate.     

The Heilongjiang Group: A Jurassic accretionary complex in the Jiamusi Massif at the western Pacific margin of northeastern China

Abstract The tectonic setting of the Eastern Asian continental margin in the Jurassic is highly controversial. In the current study, we have selected the Heilongjiang complex located at the western margin of the Jiamusi Massif in northeastern China for geochronological investigation to address this issue. Field and petrographic investigations indicate that the Heilongjiang complex is composed predominately of granitic gneiss, marble, mafic‐ultramafic rocks, blueschist, greenschist, quartzite, muscovite‐albite schist and two‐mica schist that were tectonically interleaved, indicating they represent a mélange. The marble, two‐mica schist and granitic gneiss were most probably derived from the Mashan complex, a high‐grade gneiss complex in the Jiamusi Massif with which the Heilongjiang Group is intimately associated. The ultramafic rocks, blueschist, greenschist and quartzite (chert) are similar to components in ophiolite. The sensitive high mass‐resolution ion microprobe U‐Pb zircon age of 265 ± 4 Ma for the granitic gneiss indicates that the protolith granite was emplaced coevally with Permian batholiths in the Jiamusi Massif. ⁴⁰Ar/³⁹Ar dating of biotite and phengite from the granitic gneiss and mica schist yields a late Early Jurassic metamorphic age between 184 and 174 Ma. Early components of the Jiamusi Massif, including the Mashan complex, probably formed part of an exotic block from Gondwana, affected by late Pan‐African orogenesis, and collided with the Asian continental margin during the Early Jurassic. Subduction of oceanic crust between the Jiamusi block and the eastern part of the Central Asian Orogenic Belt resulted in the formation of a huge volume of Jurassic granites in the Zhangguangcai Range. Consequently, the collision of the Jiamusi Massif with the Central Asian Orogenic Belt to the west can be considered as the result of circum‐Pacific accretion, unrelated to the Central Asian Orogenic Belt. The widespread development of Jurassic accretionary complexes along the Asian continental margin supports such an interpretation.     

Fusulinoidean faunal succession of a Paleo–Tethyan oceanic seamount in the Changning–Menglian Belt, West Yunnan, Southwest China: An overview

Abstract   Fusulinoidean faunal succession from Paleo–Tethyan seamount-type carbonates of the Yutangzhai section in the Central zone of the Changning–Menglian Belt of West Yunnan, Southwest China, is presented for the first time. The Changning–Menglian Belt is one of the orogenic belts that represent the closed main Paleo–Tethys in East Asia. The Yutangzhai section is represented by basalts and overlying carbonates, about 1100 m thick. It exhibits a continuous faunal succession composed of 17 fusulinoidean assemblages ranging from the Serpukhovian (late Mississippian/late Early Carboniferous) to Midian/Capitanian (late Middle Permian/late Guadalupian). No significant faunal break can be recognized in this section. The generic and some specific composition of the Yutangzhai assemblages indicates that the faunal succession is similar to those observed in Tethyan and Panthalassan areas and is of tropical Tethyan type although their generic diversity is definitely lower than those of Paleo–Tethyan shelves, such as South China, Indochina, and Central Asia. Throughout the Yutangzhai section, the carbonate rocks are essentially massive, very pure in composition, and devoid of terrigenous siliciclastic inputs. These lithologic characters are identical to those observed in accreted shallow-marine carbonate successions of seamount origin in Permian and Jurassic accretionary complexes of Japan, for example the Akiyoshi Limestone. This evidence further demonstrates the seamount origin of the basalt–limestone succession in the Central zone of the Changning–Menglian Belt from the viewpoint of lithofacies. In middle Mississippian (middle Early Carboniferous) time, oceanic submarine volcanism that was probably related to hot spot activities formed a number of seamounts and oceanic plateaus. It was active not only in the Panthalassa, but also in the Paleo–Tethys.