Causes and consequences of bimodal grain-size distribution of tephra fall deposited during the August 2006 Tungurahua eruption (Ecuador)

The violent August 16–17, 2006 Tungurahua eruption in Ecuador witnessed the emplacement of numerous scoria flows and the deposition of a widespread tephra layer west of the volcano. We assess the size of the eruption by determining a bulk tephra volume in the range 42–57 × 10⁶ m³, which supports a Volcanic Explosivity Index 3 event, consistent with calculated column height of 16–18 km above the vent and making it the strongest eruptive phase since the volcano’s magmatic reactivation in 1999. Isopachs west of the volcano are sub-bilobate in shape, while sieve and laser diffraction grain-size analyses of tephra samples reveal strongly bimodal distributions. Based on a new grain-size deconvolution algorithm and extended sampling area, we propose here a mechanism to account for the bimodal grain-size distribution. The deconvolution procedure allows us to identify two particle subpopulations in the deposit with distinct characteristics that indicate dissimilar transport-depositional processes. The log-normal coarse-grained subpopulation is typical of particles transported downwind by the main volcanic plume. The positively skewed, fine-grained subpopulation in the tephra fall layer shares close similarities with the elutriated co-pyroclastic flow ash cloud layers preserved on top of the scoria flow deposits. The area with the higher fine particle content in the tephra layer coincides with the downwind prolongation of the pyroclastic flow deposits. These results indicate that the bimodal distribution of grain size in the Tungurahua fall deposit results from synchronous deposition of lapilli from the main plume and fine ash elutriated from scoria flows emplaced on the western flank of the volcano. Our study also reveals that inappropriate grain-size data processing may produce misleading determination of eruptive type.     

Flow and deposition of pyroclastic granular flows: A type example from the 1975 Ngauruhoe eruption,New Zealand

Small-volume pyroclastic density currents (PDCs) are generated frequently during explosive eruptions with little warning. Assessing their hazard requires a physical understanding of their transport and sedimentation processes which is best achieved by the testing of experimental and numerical models of geophysical mass flows against natural flows and/or deposits. To this end we report on one of the most detailed sedimentological studies ever carried out on a series of pristine small-volume PDC deposits from the 1975 eruption of Ngauruhoe volcano, whose emplacement were also witnessed during eruption. Using high-resolution GPS surveys, a series of lateral excavations across the deposits, and bulk sedimentological analysis we constrained the geomorphology, internal structure and texture of the deposits with respect to laterally varying modes of deposition.     

2017年全球活动火山时空分布以及阿贡火山喷发前后的形变特征

归纳总结2017年度全球81座活火山的活动情况,共计活动1058座次,平均每周记录20座活火山的活动信息。根据火山潜在喷发的危险性和火山活动的强弱程度对上述火山进行分级描述,火山活动主要反映了地球表层的构造活动,其中大角度俯冲带的弧后火山最为强烈,小角度的俯冲带、拉张裂谷和走滑为主的板块边界火山活动较为平静,火山活动频繁的印度尼西亚岛链是受灾最为严重的区域。预计全球火山活动将进一步加剧,印尼岛链受火山灾害威胁的程度依然较大。位于印尼岛链巴厘岛上的阿贡火山自2017年9月开始活动以来,整个喷发过程极具代表性,监测阿贡火山喷发过程可为全球典型火山喷发事件研究提供参考。     

The Pomici di Avellino eruption of Somma–Vesuvius (3.9 ka BP). Part II: sedimentology and physical volcanology of pyroclastic density current deposits

Pyroclastic density currents (PDCs) generated during the Plinian eruption of the Pomici di Avellino (PdA) of Somma–Vesuvius were investigated through field and laboratory studies, which allowed the detailed reconstruction of their eruptive and transportation dynamics and the calculation of key physical parameters of the currents. PDCs were generated during all the three phases that characterised the eruption, with eruptive dynamics driven by both magmatic and phreatomagmatic fragmentation. Flows generated during phases 1 and 2 (EU1 and EU3pf, magmatic fragmentation) have small dispersal areas and affected only part of the volcano slopes. Lithofacies analysis demonstrates that the flow-boundary zones were dominated by granular-flow regimes, which sometimes show transitions to traction regimes. PDCs generated during eruptive phase 3 (EU5, phreatomagmatic fragmentation) were the most voluminous and widespread in the whole of Somma–Vesuvius’ eruptive history, and affected a wide area around the volcano with deposit thicknesses of a few centimetres up to more than 25 km from source. Lithofacies analysis shows that the flow-boundary zones of EU5 PDCs were dominated by granular flows and traction regimes. Deposits of EU5 PDC show strong lithofacies variation northwards, from proximally thick, massive to stratified beds towards dominantly alternating beds of coarse and fine ash in distal reaches. The EU5 lithofacies also show strong lateral variability in proximal areas, passing from the western and northern to the eastern and southern volcano slopes, where the deposits are stacked beds of massive, accretionary lapilli-bearing fine ash. The sedimentological model developed for the PDCs of the PdA eruption explains these strong lithofacies variations in the light of the volcano’s morphology at the time of the eruption. In particular, the EU5 PDCs survived to pass over the break in slope between the volcano sides and the surrounding volcaniclastic apron–alluvial plain, with development of new flows from the previously suspended load. Pulses were developed within individual currents, leading to stepwise deposition on both the volcano slopes and the surrounding volcaniclastic apron and alluvial plain. Physical parameters including velocity, density and concentration profile with height were calculated for a flow of the phreatomagmatic phase of the eruption by applying a sedimentological method, and the values of the dynamic pressure were derived. Some hazard considerations are summarised on the assumption that, although not very probable, similar PDCs could develop during future eruptions of Somma–Vesuvius.     

Long-term multi-hazard assessment for El Misti volcano (Peru)

We propose a long-term probabilistic multi-hazard assessment for El Misti Volcano, a composite cone located <20 km from Arequipa. The second largest Peruvian city is a rapidly expanding economic centre and is classified by UNESCO as World Heritage. We apply the Bayesian Event Tree code for Volcanic Hazard (BET_VH) to produce probabilistic hazard maps for the predominant volcanic phenomena that may affect c.900,000 people living around the volcano. The methodology accounts for the natural variability displayed by volcanoes in their eruptive behaviour, such as different types/sizes of eruptions and possible vent locations. For this purpose, we treat probabilistically several model runs for some of the main hazardous phenomena (lahars, pyroclastic density currents (PDCs), tephra fall and ballistic ejecta) and data from past eruptions at El Misti (tephra fall, PDCs and lahars) and at other volcanoes (PDCs). The hazard maps, although neglecting possible interactions among phenomena or cascade effects, have been produced with a homogeneous method and refer to a common time window of 1 year. The probability maps reveal that only the north and east suburbs of Arequipa are exposed to all volcanic threats except for ballistic ejecta, which are limited to the uninhabited but touristic summit cone. The probability for pyroclastic density currents reaching recently expanding urban areas and the city along ravines is around 0.05 %/year, similar to the probability obtained for roof-critical tephra loading during the rainy season. Lahars represent by far the most probable threat (around 10 %/year) because at least four radial drainage channels can convey them approximately 20 km away from the volcano across the entire city area in heavy rain episodes, even without eruption. The Río Chili Valley represents the major concern to city safety owing to the probable cascading effect of combined threats: PDCs and rockslides, dammed lake break-outs and subsequent lahars or floods. Although this study does not intend to replace the current El Misti hazard map, the quantitative results of this probabilistic multi-hazard assessment can be incorporated into a multi-risk analysis, to support decision makers in any future improvement of the current hazard evaluation, such as further land-use planning and possible emergency management.     

Detecting short-term evolution of Etnean scoria cones: a LIDAR-based approach

The 2001 and 2002–2003 flank eruptions on Mount Etna (Italy) were characterized by intense explosive activity which led to the formation of two large monogenetic scoria cones (one from each eruption) on the upper southern flank of the volcano. Continuous monitoring of Etna, especially during flank eruptions, has provided detailed information on the growth of these cones. They differ in genesis, shape, and size. A set of high resolution (1 m) digital elevation models (DEMs) derived from light detection and ranging (LIDAR) data collected during four different surveys (2004, 2005, 2006, and 2007) has been used to map morphology and to extract the morphometric parameters of the scoria cones. By comparing LIDAR-derived DEMs with a pre-eruption (1998) 10 m DEM, the volume of the two scoria cones was calculated for the first time. Comparison of the LIDAR-derived DEMs revealed in unprecedented detail morphological changes during scoria cone degradation. In particular, the morphologically more exposed and structurally weaker 2002–2003 cone was eroded rapidly during the first few years after its emplacement mainly due to gravitational instability of slopes and wind erosion.     

Tungurahua Volcano,Ecuador: structure,eruptive history and hazards

Tungurahua, one of Ecuador's most active volcanoes, is made up of three volcanic edifices. Tungurahua I was a 14-km-wide andesitic stratocone which experienced at least one sector collapse followed by the extrusion of a dacite lava series. Tungurahua II, mainly composed of acid andesite lava flows younger than 14,000 years BP, was partly destroyed by the last collapse event, 2955±90 years ago, which left a large amphitheater and produced a ∼8-km³ debris deposit. The avalanche collided with the high ridge immediately to the west of the cone and was diverted to the northwest and southwest for ∼15 km. A large lahar formed during this event, which was followed in turn by dacite extrusion. Southwestward, the damming of the Chambo valley by the avalanche deposit resulted in a ∼10-km-long lake, which was subsequently breached, generating another catastrophic debris flow. The eruptive activity of the present volcano (Tungurahua III) has rebuilt the cone to about 50% of its pre-collapse size by the emission of ∼3 km³ of volcanic products. Two periods of construction are recognized in Tungurahua's III history. From ∼2300 to ∼1400 years BP, high rates of lava extrusion and pyroclastic flows occurred. During this period, the magma composition did not evolve significantly, remaining essentially basic andesite. During the last ∼1300 years, eruptive episodes take place roughly once per century and generally begin with lapilli fall and pyroclastic flow activity of varied composition (andesite+dacite), and end with more basic andesite lava flows or crater plugs. This pattern is observed in the three historic eruptions of 1773, 1886 and 1916–1918. Given good age control and volumetric considerations, Tungurahua III growth's rate is estimated at ∼1.5×10⁶ m³/year over the last 2300 years. Although an infrequent event, a sector collapse and associated lahars constitute a strong hazard of this volcano. Given the ∼3000 m relief and steep slopes of the present cone, a future collapse, even of small volume, could cover an area similar to that affected by the ∼3000-year-old avalanche. The more frequent eruptive episodes of each century, characterized by pyroclastic flows, lavas, lahars, as well as tephra falls, directly threaten 25,000 people and the Agoyan hydroelectric dam located at the foot of the volcano.     

Facies architecture and Late Pliocene – Pleistocene evolution of a felsic volcanic island, Milos, Greece

The volcanic island of Milos, Greece, comprises an Upper Pliocene –Pleistocene, thick (up to 700 m), compositionally and texturally diverse succession of calc-alkaline, volcanic, and sedimentary rocks that record a transition from a relatively shallow but dominantly below-wave-base submarine setting to a subaerial one. The volcanic activity began at 2.66±0.07 Ma and has been more or less continuous since then. Subaerial emergence probably occurred at 1.44±0.08 Ma, in response to a combination of volcanic constructional processes and fault-controlled volcano-tectonic uplift. The architecture of the dominantly felsic-intermediate volcanic succession reflects contrasts in eruption style, proximity to source, depositional environment and emplacement processes. The juxtaposition of submarine and subaerial facies indicates that for part of the volcanic history, below-wave base to above-wave base, and shoaling to subaerial depositional environments coexisted in most areas. The volcanic facies architecture comprises interfingering proximal (near vent), medial and distal facies associations related to five main volcano types: (1) submarine felsic cryptodome-pumice cone volcanoes; (2) submarine dacitic and andesitic lava domes; (3) submarine-to-subaerial scoria cones; (4) submarine-to-subaerial dacitic and andesitic lava domes and (5) subaerial lava-pumice cone volcanoes. The volcanic facies are interbedded with a sedimentary facies association comprising sandstone and/or fossiliferous mudstone mainly derived from erosion of pre-existing volcanic deposits. The main facies associations are interpreted to have conformable, disconformable, and interfingering contacts, and there are no mappable angular unconformities or disconformities within the volcanic succession.Electronic Supplementary Material Supplementary material is available for this article at     

Hazards from pyroclastic density currents at Mt. Etna (Italy)

Despite the recent recognition of Mount Etna as a periodically violently explosive volcano, the hazards from various types of pyroclastic density currents (PDCs) have until now received virtually no attention at this volcano. Large-scale pyroclastic flows last occurred during the caldera-forming Ellittico eruptions, 15–16 ka ago, and the risk of them occurring in the near future is negligible. However, minor PDCs can affect much of the summit area and portions of the upper flanks of the volcano. During the past ~ 20 years, small pyroclastic flows or base-surge-like vapor and ash clouds have occurred in at least 8 cases during summit eruptions of Etna. Four different mechanisms of PDC generation have been identified during these events: (1) collapse of pyroclastic fountains (as in 2000 and possibly in 1986); (2) phreatomagmatic explosions resulting from mixing of lava with wet rock (2006); (3) phreatomagmatic explosions resulting from mixing of lava with thick snow (2007); (4) disintegration of the unstable flanks of a lava dome-like structure growing over the rim of one of the summit craters (1999). All of these recent PDCs were of a rather minor extent (maximum runout lengths were about 1.5 km in November 2006 and March 2007) and thus they represented no threat for populated areas and human property around the volcano. Yet, events of this type pose a significant threat to the lives of people visiting the summit area of Etna, and areas in a radius of 2 km from the summit craters should be off-limits anytime an event capable of producing similar PDCs occurs. The most likely source of further PDCs in the near future is the Southeast Crater, the youngest, most active and most unstable of the four summit craters of Etna, where 6 of the 8 documented recent PDCs originated. It is likely that similar hazards exist in a number of volcanic settings elsewhere, especially at snow- or glacier-covered volcanoes and on volcano slopes strongly affected by hydrothermal alteration.     

THE VOLCANIC ACTIVITIES AND HAZARD PREDICTION OF WUDALIANCHI VOLCANIC BELT

More than 40 late Cenozoic monogenetic volcanoes formed a volcanic belt striking NNW from Keluo, through Wudalianchi to Erkeshan in NE China. These volcanoes belong to a unified volcano system, namely Wudalianchi volcanic belt(WVB for short). Based on the volcanic evolution history and the nature of monogenetic volcanic system, we estimate that the volcanic system of WVB is still active and has the potential to erupt again. Hence, this paper studied the temporal-spatial distribution and volcanic eruption types to evaluate the possible eruption hazard types and areas of influence in the future. Volcanic field characteristics and K-Ar radiometric data suggest two episodes of volcanism in the WVB, the Pliocene to early Pleistocene volcanism(4.59~1.00MaBP)and the middle Pleistocene to Holocene volcanism(0.79Ma to now). The early episode volcanoes are distributed only in the north of WVB(mainly in Keluo volcanic field), featured by effusive eruption, and mainly formed monogenetic shield, whose base diameter is large and slope is gentle. However, the late episode eruptions occurred over the entire WVB. The explosive eruption in this stage formed numerous relatively intact scoria cones of explosive origin. Meanwhile the effusive eruption formed widely distributed lava flows. Both effusive eruption and explosive eruption are common in WVB. The effusive eruption formed monogenetic shields and lava flows. The resulting pahoehoe lava, aa lava and block lava appeared in WVB. There are three end-member types of explosive eruption driven by magmatic volatile. Violent Strombolian eruption has the highest degree of fragmentation and mass flux, characterized by eruption column. Strombolian eruption has the high degree of fragmentation, but low mass flux, featured by pulse eruption. Hawaiian eruption has low degree of fragmentation, but high in mass flux, generating large scoria cones. In addition, this paper for the first time found phreatomagmatic eruption in WVB, which formed tuff cone. Transitional eruptions are also common in WVB, which have certain characteristics among the end-member eruption types. Besides, certain volcanoes displayed multiple explosive eruption types during the whole eruption span. According to the volcanic temporal-spatial distribution and eruption characteristics in WVB, the potential volcanic hazards in future are constrained. It appears that the violent Strombolian and Strombolian eruption will not have significant impact on aviation safety in the vertical direction. In the radial direction, the ejected volcanic bomb can reach as far as 1km from the vents and the fallout tephra may disperse downwind over a distance ranging from 1~10km. The major hazard of Hawaiian eruption and effusive eruption comes from lava flow, and its migration distance may reach 3.0~13.5km for pahoehoe lava and 2.9~14.9km for aa lava. The base surge in phreatomagmatic eruption can reach a velocity of 200~400m/s, and the migration distance is around 10km. This is a big threat that people should pay more attention to and take precautions in advance. Besides, it is necessary to strengthen the real-time observation of the volcanoes in the WVB, especially those formed in the late episode as well as near the active fault.     

petrological and geochemical characteristics of quarternary volcanic rocks in haixing area,eastern north china

Field investigation and lab analysis on samples were carried out for Quaternary volcanoes, including Xiaoshan volcano, Dashan volcano and Bianzhuang hidden volcano, in Haixing area, east of North China. Results show that Xiaoshan volcano with the eruptive material of volcanic scoria, crystal fragments and volcanic ash is a maar volcano, the eruptive pattern is pheatomagmatic eruption, and the influence scope is near the crater. Dashan volcano exploded in the early stage, and then the magma intruded, forming the volcanic neck. The eruption strength and scale are limited, and the eruptive materials are scoria, volcanic agglomerate and dense lava neck. The volcanic rocks in Bianzhuang are porosity and dense volcanic rocks and volcanic breccia, reflecting the pattern of weak explosive eruption and lava flow, and the K-Ar age dating on volcanic rocks indicates that the eruption happened in early Pleistocene. Xiaoshan volcanic scoria and Bianzhuang hidden volcanic rocks are mainly basaltic, Dashan volcanic rocks with lower SiO₂ content are nephelinite in composition. Their oxide contents have no linear relationship, indicating that there is no magma evolution relationship between these magmas from the three places. Three volcanic rocks all have enrichment of light rare earth. The Bianzhuang volcanic rocks are rich in large ion lithophile elements, and have no high field strength elements Zr and Hf, Ti losses. The volcanic materials from Xiaoshan and Dashan are intensively rich in Th, U, Nb and Ta, and significantly poor in K and Ti. Although the magmas from these three places in Haixing area may all come from asthenosphere, the volcanic materials have different petrological and geochemical features, and relatively independent volcanic structures, therefore, they experienced different magma processes.     

Daily monitoring of Ecuadorian volcanic degassing from space

We present daily measurements of sulfur dioxide (SO₂) emissions from active volcanoes in Ecuador and southern Colombia between September 2004 and September 2006, derived from the Ozone Monitoring Instrument (OMI) on NASA's EOS/Aura satellite. OMI is an ultraviolet/visible spectrometer with an unprecedented combination of spatial and spectral resolution, and global coverage, that permits daily measurements of passive volcanic degassing from space. We use non-interactive processing methods to automatically extract daily SO₂ burdens and information on SO₂ sources from the OMI datastream. Maps of monthly average SO₂ vertical columns retrieved by OMI over Ecuador and S. Colombia are also used to illustrate variations in regional SO₂ loading and to pinpoint sources. The dense concentration of active volcanoes in Ecuador provides a stringent test of OMI's ability to distinguish SO₂ from multiple emitting sources. Our analysis reveals that Tungurahua, Reventador and Galeras were responsible for the bulk of the SO₂ emissions in the region in the timeframe of our study, with no significant SO₂ discharge detected from Sangay. At Galeras and Reventador, we conclude that OMI can detect variations in SO₂ release related to cycles of conduit sealing and degassing, which are a critical factor in hazard assessment. The OMI SO₂ data for Reventador are the most extensive sequence of degassing measurements available for this remote volcano, which dominated regional SO₂ production in June–August 2005. At Tungurahua, the OMI measurements span the waning stage of one eruptive cycle and the beginning of another, and we observe increasing SO₂ burdens in the months prior to explosive eruptions of the volcano in July and August 2006. Cumulative SO₂ loadings measured by OMI yield a total of ~ 1.16 Tg SO₂ emitted by volcanoes on mainland Ecuador/S. Colombia between September 2004 and September 2006; as much as 95% of this SO₂ may originate from non-eruptive degassing. Approximate apportionment of the total SO₂ loading indicates that ~ 40% originated from Tungurahua, with ~ 30% supplied by both Reventador and Galeras. These measurements of volcanic SO₂ degassing in Ecuador confirm OMI's potential as an effective, economical and risk-free tool for daily monitoring of SO₂ emissions from hazardous volcanoes.     

A comparison of the recent eruptions of Mt. Pelée,Martinique and Soufrière,St. Vincent

The simultaneous eruption of Mt. Pelée, Martinique and Soufrière, St. Vincent are regarded as the first recognized examples of Pelean-type and St. Vincent-type pyroclastic eruptions. Both produced nuées ardentes, the former usually laterally directed because of the presence of a dome and the latter vertically directed from an open crater. Both volcanoes have subsequently erupted for a second time this century. The 1902–05 and 1929–32 eruptions of Mt. Pelée produced andesite lava of almost identical composition and mineralogy. Both contain two generations of plagioclase, orthopyroxene, Fe-Ti oxide, corroded brown amphibole and olivine rimmed by pyroxene. In contrast, the Soufrière material is more basic in composition varying from basaltic andesite to basalt in 1902–03 and basaltic andesite in 1971–72. The Soufrière material contains two generations of plagioclase (with those of 1971–72 having additional zones of labradorite), clinopyroxene, orthopyroxene, olivine and Fe-Ti oxide. The pyroclastic deposits are strikingly different, those from the Pelean-type eruption are termed «block and ash deposits» being characterised by poorly vesicular lava blocks up to 7 m in diameter, while the St. Vincent-type eruption produced «scoria and ash deposits» containing vesicular ropey blocks or bombs no larger than 1 m in diameter. The differences in styles of eruption are attributed to differences in viscosity and mechanism of eruption of the magmas. Stratigraphic studies of Mt. Pelée reveal that the volcano has produced basaltic andesite scoria and ash deposits from St. Vincent-type eruptions. It is concluded that the recent eruptions of Pelée tapped a deep level magma during both eruptions releasing magma of similar composition, while the 1971 Soufrière magma is thought to be a remnant of the 1903 basaltic magma which remained at a high level within the volcano where it underwent enrichment in plagioclase and loss of olivine and oxide.     

Prediction and characteristics of the 1975 eruption of Tolbachik volcano,Kamchatka

According to a long-term prediction. Tolbachik volcano was expected to erupt with a 0.7 probability, some time in the period 1964–1978. An eruption of Tolbachik commenced at 21.45 GMT on July 5, 1975. It took place on the southwestern Hank of the volcano at an altitude of 880 m a.s.l. about 18 km from the central crater. An earthquake swarm preceded it. The place and time of eruption were predicted three days belore it began on the basis of epicenter locations and characteristics of recorded seismic activity. During the period July 5–28 gases and incandescent magma were continuously ejected to a height of 2,000 m above ground level. Ash clouds rose to a height of 6 to 8 km, with a train of ash extending over a horizontal distance of 300 km. The velocity of jets from the crater was about 200 m/see. During the first days of the eruption the quantity of materials erupted and the eruption power amounted to 1.25 · 10⁵ kg/see and 2.1 · 10¹¹W, respectively. The vertical growth of the scoria cone was consistent with the lawH=2.15³√vt, where the time and height are expressed in seconds and meters, respectively. The mouth of the volcano conduit was estimated to be 12 m in diameter. Lava began to erupt at 22^h23^m on July 28. During the period July 5–31 about 3 · 10¹¹ kg of magmatic material, consisting of ash, scoria and lava, was erupted onto the earth’s surface. The energy released over the period of eruption accounted for 5 · 10¹⁷ J.     

The occurrence of Mt Barca flank eruption in the evolution of the NW periphery of Etna volcano (Italy)

Geological surveys, tephrostratigraphic study, and ⁴⁰Ar/³⁹Ar age determinations have allowed us to chronologically constrain the geological evolution of the lower NW flank of Etna volcano and to reconstruct the eruptive style of the Mt Barca flank eruption. This peripheral sector of the Mt Etna edifice, corresponding to the upper Simeto valley, was invaded by the Ellittico volcano lava flows between 41 and 29 ka ago when the Mt Barca eruption occurred. The vent of this flank eruption is located at about 15 km away from the summit craters, close to the town of Bronte. The Mt Barca eruption was characterized by a vigorous explosive activity that produced pyroclastic deposits dispersed eastward and minor effusive activity with the emission of a 1.1-km-long lava flow. Explosive activity was characterized by a phreatomagmatic phase followed by a magmatic one. The geological setting of this peripheral sector of the volcano favors the interaction between the rising magma and the shallow groundwater hosted in the volcanic pile resting on the impermeable sedimentary basement. This process produced phreatomagmatic activity in the first phase of the eruption, forming a pyroclastic fall deposit made of high-density, poorly vesicular scoria lapilli and lithic clasts. Conversely, during the second phase, a typical strombolian fall deposit formed. In terms of hazard assessment, the possible occurrence of this type of highly explosive flank eruption, at lower elevation in the densely inhabited areas, increases the volcanic risk in the Etnean region and widens the already known hazard scenario.     

Transient 3D numerical simulations of column collapse and pyroclastic density current scenarios at Vesuvius

Numerical simulations of column collapse and pyroclastic density current (PDC) scenarios at Vesuvius were carried out using a transient 3D flow model based on multiphase transport laws. The model describes the dynamics of the collapse as well as the effects of the 3D topography of the volcano on PDC propagation. Source conditions refer to a medium-scale sub-Plinian event and consider a pressure-balanced jet. Simulation results provide new insights into the complex dynamics of these phenomena. In particular: 1) column collapse can be characterized by different regimes, from incipient collapse to partial or nearly total collapse, thus confirming the possibility of a transitional field of behaviour of the column characterized by the contemporaneous and/or intermittent occurrence of ash fallout and PDCs; 2) the collapse regime can be characterized by its fraction of eruptive mass reaching the ground and generating PDCs; 3) within the range of the investigated source conditions, the propagation and hazard potential of PDCs appear to be directly correlated with the flow-rate of the mass collapsing to the ground, rather than to the collapse height of the column (this finding is in contrast with predictions based on the energy-line concept, which simply correlates the PDC runout and kinetic energy with the collapse height of the column); 4) first-order values of hazard variables associated with PDCs (i.e., dynamic pressure, temperature, airborne ash concentration) can be derived from simulation results, thereby providing initial estimates for the quantification of damage scenarios; 5) for scenarios assuming a location of the central vent coinciding with that of the present Gran Cono, Mount Somma significantly influences the propagation of PDCs, largely reducing their propagation in the northern sector, and diverting mass toward the west and southeast, accentuating runouts and hazard variables for these sectors; 6) the 2D modelling approximation can force an artificial radial propagation of the PDCs since it ignores azimuthal flows produced by real topographies that therefore need to be simulated in fully 3D conditions.     

The 3640–3510 BC rhyodacite eruption of Chachimbiro compound volcano,Ecuador: a violent directed blast produced by a satellite dome

Based on geochronological, petrological, stratigraphical, and sedimentological data, this paper describes the deposits left by the most powerful Holocene eruption of Chachimbiro compound volcano, in the northern part of Ecuador. The eruption, dated between 3640 and 3510 years BC, extruded a ～650-m-wide and ～225-m-high rhyodacite dome, located 6.3 km east of the central vent, that exploded and produced a large pyroclastic density current (PDC) directed to the southeast followed by a sub-Plinian eruptive column drifted by the wind to the west. The PDC deposit comprises two main layers. The lower layer (L1) is massive, typically coarse-grained and fines-depleted, with abundant dense juvenile fragments from the outgassed dome crust. The upper layer (L2) consists of stratified coarse ash and lapilli laminae, with juvenile clasts showing a wide density range (0.7–2.6 g cm^?3). The thickness of the whole deposit ranges from few decimeters on the hills to several meters in the valleys. Deposits extending across six valleys perpendicular to the flow direction allowed us to determine a minimum velocity of 120 m s^?1. These characteristics show striking similarities with deposits of high-energy turbulent stratified currents and in particular directed blasts. The explosion destroyed most of the dome built during the eruption. Subsequently, the sub-Plinian phase left a decimeter-thick accidental-fragment-rich pumice layer in the Chachimbiro highlands. Juvenile clasts, rhyodacitic in composition (SiO₂?=?68.3 wt%), represent the most differentiated magma of Chachimbiro volcano. Magma processes occurred at two different depths (～14.4 and 8.0 km). The hot (～936 °C) deep reservoir fed the central vent while the shallow reservoir (～858 °C) had an independent evolution, probably controlled by El Angel regional fault system. Such destructive eruptions, related to peripheral domes, are of critical importance for hazard assessment in large silicic volcanic complexes such as those forming the Frontal Volcanic Arc of Ecuador and Colombia.     

PRELIMINARY VOLCANIC HAZARD ZONATION IN JINLONGDINGZI VOLCANO,LONGANG VOLCANO AREA,JILIN PROVINCE,CHINA

Longgang volcano cluster is 150km away from the Tianchi volcano, located in Jingyu and Huinan Counties, Jilin Province, China. It had a long active history and produced hundreds of volcanoes. The latest and largest eruption occurred between 1 500 and 1 600 years ago by Jinlongdingzi(JLDZ)volcano which had several eruptions in the history. This paper discusses the volcanic hazard types, and using the numerical simulations of lava flow obtained with the Volcflow model, proposes the hazard zonation of JLDZ volcano area. JLDZ volcano eruption type is sub-plinian, which produced a great mass of tephra fallout, covering an area of 260km². The major types of volcanic hazards in JLDZ area are lava flow, tephra fallout and spatter deposits. Volcflow is developed by Kelfoun for the simulation of volcanic flows. The result of Volcflow shows that the flows are on the both sides of the previous lava flows which are low-lying areas now. According to the physical parameters of historical eruption and Volcflow, we propose the preliminary volcanic hazard zonation in JLDZ area. The air fall deposits are the most dangerous product in JLDZ. The highly dangerous region of spatter deposits is limited to a radius of about 2km around the volcano. The high risk area of tephra fallout is between 2km to 9km around the volcano, and between 9km to 14km is the moderate risk area. Out of 14km, it is the low risk area. Lava flow is controlled by topography. From Jinchuan Town to Houhe Village near the volcano is the low-lying area. If the volcano erupts, these areas will be in danger.     

Eruptive styles and inferences about plumbing systems at Hidden Cone and Little Black Peak scoria cone volcanoes (Nevada,U.S.A.)

We describe two small scoria cone volcanoes, Hidden Cone and Little Black Peak (ages between ~320–390 ka), in the Southwestern Nevada Volcanic Field and discuss their eruption mechanisms and inferences about their plumbing systems. Cone-forming pyroclastic deposits are consistent with eruptive styles ranging from Strombolian to violent Strombolian, and lavas emanated from near the bases of the cones. The volcanoes are monogenetic (rather than polycyclic, as allowed by previous geomorphic interpretations). Vents at each volcano appear to coincide with pre-existing normal faults, consistent with observations at older, deeply eroded volcanoes in the region. The existence of these two volcanoes on a topographically high area (particularly Hidden Cone) provides evidence for short feeder dike lengths (~500 m at the surface). We infer that this short length reflects the small length scale of the mantle source region that was tapped to feed each volcano. Editorial responsibility: J Stix