Deglaciation models from the Swedish West Coast

Deglaciation processes within different rock relief types are discussed. The lower parts of the fissure-valley landscape in western Sweden were covered by the late-glacial sea at deglaciation, while the rock plateaux between the valleys formed an arctic archipelago. The glacial movements, deposition activity and recession were intimately dependent on the variations of the topography and on the buoyancy of the seawater in the valleys. The opinion that a piedmont glaciation existed in eastern Halland during the deglaciation stage has been corroborated concerning areas above the marine limit. In the valleys below this limit the ice margin, however, was straight or slightly concave. The western part of the South Swedish Highland, situated high above the marine limit, is characterized by a zonal deglaciation; zone by zone of the ice margin was detached from the actively moving ice and became immobile. Subglacially formed eskers appear together with glaciofluvial deltas which formed extramarginally in ice-dammed lakes. The moraine forms are often dominated by 1–2 km long drumlins with rock cores. Where the ice diverged over a convex bedrock basement, Rogen-like moraine ridges, radial as well as transverse, were formed during the deglaciation stage when the ice was stagnating.     

Ribbed moraine stratigraphy and formation in southern Finnish Lapland

Characteristics of ribbed moraines, the dominating moraine type in southern Finnish Lapland, have been studied in detail. The ridges are composed of several till units, of which the bottommost units consist of mature basal tills and the surficial parts are enriched with local, short‐transport rock fragments and boulders in till and at the surface of ridges. As a result of this re‐examination a two‐step model of the formation process of ribbed moraines is presented. In the first stage, while cold‐based conditions prevailed, both the bottommost part of the ice sheet and the frozen, substrate fractured under compressive ice flow. Following glacial transport of fractured blocks and formation of the transverse ridge morphology, erosion between the ridges continued owing to freeze–thaw process under variable pressure conditions. In the areas with a low pre‐existing till sheet, the process caused quarrying of the bedrock surface and subsequent deposition of rock fragments and boulders under high pressure on the next ridge. The most suitable conditions for ribbed moraine formation existed during Late Weichselian deglaciation, after the Younger Dryas when the climate warmed very quickly, leading to an imbalance between a warm glacier surface and a cold base. Copyright © 2006 John Wiley & Sons, Ltd.     

Processes of annual moraine formation at a temperate alpine valley glacier: insights into glacier dynamics and climatic controls

This paper presents the first detailed sedimentological study of annual moraines formed by an alpine valley glacier. The moraines have been forming since at least AD 1980 by a subsidiary lobe of Gornergletscher, Switzerland that advances up a reverse bedrock slope. They reach heights of 0.5–1.5 m, widths of up to 6 m and lengths of up to several hundreds of metres. Sediments in these moraines are composed of proglacial outwash and debris flow units; subglacial traction till is absent entirely. Based on four representative sections, three genetic process combinations have been identified: (i) inefficient bulldozing of a gently sloping ice margin transfers proglacial sediments onto the ice, causing differential ablation and dead‐ice incorporation upon retreat; (ii) terrestrial ice‐contact fans are formed by the dumping of englacial and supraglacial material from point sources such as englacial conduit fills; debris flows and associated fluvial sediments are stacked against a temporarily stationary margin at the start, and deformed during glacier advance in the remainder, of the accumulation season; (iii) a steep ice margin without supraglacial input leads to efficient bulldozing and deformation of pre‐existing foreland sediments by wholesale folding. Ice‐surface slope appears to be a key control on the type of process responsible for moraine formation in any given place and year. The second and third modes result in stable and higher moraines that have a higher preservation potential than those containing dead ice. Analysis of the spacing and climatic records at Gornergletscher reveals that winter temperature controls marginal retreat and hence moraine formation. However, any climatic signal is complicated by other factors, most notably the presence of a reverse bedrock slope, so that the extraction of a clear climatic signal is not straightforward. This study highlights the complexity of annual moraine formation in high‐mountain environments and suggests avenues for further research.     

Controlled moraines: origins,characteristics and palaeoglaciological implications

Controlled moraines are supraglacial debris concentrations that become hummocky moraine upon de-icing and possess clear linearity due to the inheritance of the former pattern of debris-rich folia in the parent ice. Linearity is most striking wherever glacier ice cores still exist but it increasingly deteriorates with progressive melt-out. As a result, moraine linearity has a low preservation potential in deglaciated terrains but hummocky moraine tracts previously interpreted as evidence of areal stagnation may instead record receding polythermal glacier margins in which debris-rich ice was concentrated in frozen toe zones. Recent applications of modern glaciological analogues to palaeoglaciological reconstructions have implied that: (a) controlled moraine development can be ascribed to a specific process (e.g. englacial thrusting or supercooling); and (b) controlled moraine preservation potential is good enough to imply the occurrence of the specific process in former glacier snouts (e.g. ancient polythermal or supercooled snouts). These assumptions are tested using case studies of controlled moraine construction in which a wide range of debris entrainment and debris-rich ice thickening mechanisms are seen to produce the same geomorphic features. Polythermal conditions are crucial to the concentration of supraglacial debris and controlled moraines in glacier snouts via processes that are most effective at the glacier–permafrost interface. End moraines lie on a process–form continuum constrained by basal thermal regime. The morphological expression of englacial structures in controlled moraine ridges is most striking while the moraines retain ice cores, but the final deposits/landforms tend to consist of discontinuous transverse ridges with intervening hummocks, preserving only a weak impression of the former englacial structure. These are arranged in arcuate zones of hummocky moraine up to 2 km wide containing ice-walled lake plains and lying down flow of streamlined landforms produced by warm-based ice. A variety of debris entrainment mechanisms can produce the same geomorphic signature. Spatial and temporal variability in process–form relationships will lead to the sequential development of different types of end moraines during the recession of a glacier or ice sheet margin.     

Types of debris slope accumulations and rock glaciers in South Spitsbergen

A proposal for the classification of accumulations formed at the foot of mountain slopes and glacier snouts is presented for South Spitsbergen. Simple (talus cones) and complex (protalus ramparts, protalus rock glaciers, moraine rock glaciers) landforms are distinguished. The homogeneity of the features deposited at the foot of mountain slopes on a bedrock as well as on a glacial ice is noted, although the latter are more easily destructed due to melting of the buried ice. A significance of the ice core (interstitial or glacial ice) for a development of protalus rock glaciers and moraine rock glaciers is emphasized.     

Formation and disintegration of a high-arctic ice-cored moraine complex, Scott Turnerbreen, Svalbard

Englacial debris structures, morphology and sediment distribution at the frontal part and at the proglacial area of the Scott Turnerbreen glacier have been studied through fieldwork and aerial photograph interpretation. The main emphasis has been on processes controlling the morphological development of the proglacial area. Three types of supraglacial ridges have been related to different types of englacial debris bands. We suggest that the sediments were transported in thrusts, along flow lines and in englacial meltwater channels prior to, and during a surge in, the 1930s, before the glacier turned cold. Melting-out of englacial debris and debris that flows down the glacier front has formed an isolating debris cover on the glacier surface, preventing further melting. As the glacier wasted, the stagnant, debris-covered front became separated from the glacier and formed icecored moraine ridges. Three moraine ridges were formed outside the present ice-front. The further glacier wastage formed a low-relief proglacial area with debris-flow deposits resting directly on glacier ice. Melting of this buried ice initiated a second phase of slides and debris flows with a flow direction independent of the present glacier surface. The rapid disintegration of the proglacial morphology is mainly caused by slides and stream erosion that uncover buried ice and often cause sediments to be transported into the main river and out of the proglacial area. Inactive stream channels are probably one of the morphological elements that have the best potential for preservation in a wasting ice-cored moraine complex and may indicate former ice-front positions.     

Subglacial and ice‐marginal landforms in south‐central Ontario: implications for ice‐sheet reconfiguration during deglaciation

Regional‐scale, high‐resolution terrain data permit the study of landforms across south‐central Ontario, where the bed of the former Laurentide Ice Sheet is well exposed and passes downflow from irregular topography on Precambrian Shield highlands to flat‐lying Palaeozoic carbonate bedrock, and thick (50 to >200 m) unconsolidated sediment substrates. Rock drumlins and megagrooves are eroded into bedrock and mega‐scale glacial lineations (MSGL) occur on patchy streamlined till residuals in the Algonquin Highlands. Downflow, MSGL pass into juxtaposed rock and drift drumlins on Palaeozoic bedrock and predominantly till‐cored drumlins in areas of thick drift. The Lake Simcoe Moraines, now traceable for more than 80 km across the Peterborough drumlin field (PDF), form a distinct morphological boundary: downflow of the moraine system, drumlins are larger, broader and show no indication of subsequent reworking by the ice, whereas upflow of the moraines, a higher degree of complexity in bedform pattern and morphology is distinguished. Discrete radial and/or cross‐cutting flowset terminate at subtle till‐cored moraine ridges downflow of local topographic lows, indicating multiple phases of late‐stage ice flow with strong local topographic steering. More regional‐scale flow switching is evident as NW‐orientated bedforms modify drumlins south of the Oak Ridges Moraine, and radial flowset emanate from areas within the St. Lawrence and Ottawa River valleys. Most of the drumlins in the PDF formed during an early, regional drumlinization phase of NE–SW flow that followed the deposition of a thick regional till sheet. These were subsequently modified by local‐scale, topographically controlled flows that terminate at till‐cored moraines, providing evidence that the superimposed bedforms record dynamic ice (re)advances throughout the deglaciation of south‐central Ontario. The patterns and relationships of glacial landform distribution and characteristics in south‐central Ontario hold significance for many modern and palaeo‐ice sheets, where similar downflow changes in bed topography and substrate lithology are observed.     

Classification and terminology of morainic landforms in Finland

The terms assigned to Finnish morainic landforms were frequently originally established for areas where the glacial environment was different from that in Finland. The terms therefore are not always applicable to the conditions found here and there is a need for some revision. Some new proposals are presented in this paper. The term cover moraine could be adopted to refer to a vencer of till, which has a rather flat surface, devoid of transverse or lineal elements. The term g round moraine would then only he applied when the relief is independent of the underlying bedrock topography. As regards the term hummocky moraine , it would he advantageous to subdivide it into at lcast hummocky disintegration moraine, thehummocky squeezed-up moraine, and the hummocky active-ice moraine . Today the term is of little value since it is commonly used to describe forms with varied origins.
Landforms tend to form groups of closely related genetic assenihlagcs or of complexes where the members are areally related, but often genetically different. It is more logical to handle them as an association of forms, rather than to split the group artificially into a number of separate units. A gradational series of assemblages from a fluting assemblage into a drumlin assemblage and further into a hummocky active-ice assemblage characterizes the Koillisinaa reference area. A bimodal flow system prevailed during the formation of the landforins. Spiral flow predominates in the formation of flutings and linear drumlins, ahercas up and down movement predominates in the formation of the transverse ridges of Kogen moraine. Between these end members coinhinations of these flow patterns occur.     

Problems of moraine morphology: Rogen moraine and Blattnick moraine

In Västerbotten County, Sweden, both Rogen moraine and Blattnick moraine are common in the inner part of the county. Rogen moraines are found primarily in basins and upslope positions, whereas the Blattnick type (first found in the Blattnicksele area in the county) mostly occurs in broader, more plain-like areas. Moreover, both types show a great variety of individual forms, due to topography, basal conditions and ice tectonics. Most Rogen moraine ridges are characterized by features due to active ice. The Blattnick moraine type is characterized by broader and more drumlinized ridges. They are often proximally higher and laterally-distally extended, thus merging into streamlined mounds or hills. The material composition of Rogen and Blattnick moraines is similar. The authors have found the following sequence of transitional forms from the Scandinavian mountains in the west towards the east: (1) Rogen moraines, (2) crescent ridges, (3) Blattnick moraines, (4) drumlins.     

Hummocky moraine: sedimentary record of stagnant Laurentide Ice Sheet lobes resting on soft beds

Over large areas of the western interior plains of North America, hummocky moraine (HM) formed at the margins of Laurentide Ice Sheet (LIS) lobes that flowed upslope against topographic highs. Current depositional models argue that HM was deposited supraglacially from stagnant debris-rich ice (`disintegration moraine'). Across southern Alberta, Canada, map and outcrop data show that HM is composed of fine-grained till as much as 25 m thick containing rafts of soft, glaciotectonized bedrock and sediment. Chaotic, non-oriented HM commonly passes downslope into weakly-oriented hummocks (`washboard moraine') that are transitional to drumlins in topographic lows; the same subsurface stratigraphy and till facies is present throughout. These landforms, and others such as doughnut-like `rim ridges', flat-topped `moraine plateaux' and linear disintegration ridges, are identified as belonging to subglacially-deposited soft-bed terrain. This terrain is the record of ice lobes moving over deformation till derived from weakly-lithified, bentonite-rich shale. Drumlins record continued active ice flow in topographic lows during deglaciation whereas HM was produced below the outer stagnant margins of ice lobes by gravitational loading (`pressing') of remnant dead ice blocks into wet, plastic till. Intervening zones of washboard moraine mark the former boundary of active and stagnant ice and show `hybrid' drumlins whose streamlined form has been altered by subglacial pressing (`humdrums') below dead ice. The presence of hummocky moraine over a very large area of interior North America provides additional support for glaciological models of a soft-bedded Laurentide Ice Sheet.     

东南极冰盖上新世大规模退缩事件

笔者近年对东南极内陆格罗夫山(Grove Mountains)开展了上新世以来冰盖表面波动的综合研究,运用冰川地质、地貌、土壤、沉积岩、孢粉组合及宇宙核素等各种方法手段,提出东南极大冰盖形成以后并非稳定演化至今,而在上新世早期时发生过大规模退缩,其前缘至少曾经退缩到格罗夫山地区,距现今冰盖边缘约400 km。之后,冰盖又迅速膨胀,到距今2.3 Ma时,冰面至少超过现今高度约400 m。以后冰面缓慢平稳下降,至1.6 Ma时,东南极冰盖进入第四纪振荡期,但重新上升的冰面再也没有超过现今高度的100 m以上。东南极冰盖大规模消融事件在全球尺度上也有所响应,例如北半球大冰盖形成,青藏高原整体剧烈隆升,塔里木盆地黄土出现等。这类行星尺度的气候变化可能与直布罗陀海峡关闭与地中海盐化事件,巴拿马地峡关闭等大地构造事件有关。     

Moraine development at a small High‐Arctic valley glacier: Rieperbreen,Svalbard

Ice‐cored lateral and frontal moraine complexes, formed at the margin of the small, land‐based Rieperbreen glacier, central Svalbard, have been investigated through field observations and interpretations of aerial photographs (1936, 1961 and 1990). The main focus has been on the stratigraphical and dynamic development of these moraines as well as the disintegration processes. The glacier has been wasting down since the ‘Little Ice Age’ (LIA) maximum, and between 1936 and 1990 the glacier surface was lowered by 50–60 m and the front retreated by approximately 900 m. As the glacier wasted, three moraine ridges developed at the front, mainly as melting out of sediments from debris‐rich foliation and debris‐bands formed when the glacier was polythermal, probably during the LIA maximum. The disintegration of the moraines is dominated by wastage of buried ice, sediment gravity‐flows, meltwater activity and some frost weathering. A transverse glacier profile with a northward sloping surface has developed owing to the higher insolation along the south‐facing ice margin. This asymmetric geometry also strongly affects the supraglacial drainage pattern. Lateral moraines have formed along both sides of the glacier, although the insolation aspect of the glacier has resulted in the development of a moraine 60 m high along its northern margin. Copyright © 2001 John Wiley & Sons, Ltd.     

Quaternary glaciations in the Verkhoyansk Mountains, Northeast Siberia

Geomorphological mapping revealed five terminal moraines in the central Verkhoyansk Mountains. The youngest terminal moraine (I) was formed at least 50 ka ago according to new IRSL (infrared optically stimulated luminescence) dates. Older terminal moraines in the western foreland of the mountains are much more extensive in size. Although the smallest of these older moraines, moraine II, has not been dated, moraine III is 80 to 90 ka, moraine IV is 100 to 120 ka, and the outermost moraine V was deposited around 135 ka. This glaciation history is comparable to that of the Barents and Kara ice sheet and partly to that of the Polar Ural Mountains regarding the timing of the glaciations. However, no glaciation occurred during the global last glacial maximum (MIS 2). Based on cirque orientation and different glacier extent on the eastern and western flanks of the Verkhoyansk Mountains, local glaciations are mainly controlled by moisture transport from the west across the Eurasian continent. Thus glaciations in the Verkhoyansk Mountains not only express local climate changes but also are strongly influenced by the extent of the Eurasian ice sheets.     

Glacial deposits and Late Weichselian ice-sheet dynamics in the northeastern Baltic Sea

Glacial deposits and landforms, interpreted from the continuous seismic reflection data, have been used to reconstruct the Late Weichselian ice-sheet dynamics and the sedimentary environments in the northeastern Baltic Sea. The bedrock geology and topography played an important role in the glacial dynamics and subglacial meltwater drainage in the area. Drumlins suggest a south-southeasterly flow direction of the last ice sheet on the Ordovician Plateau. Eskers demonstrate that subglacial meltwater flow was focused mostly within bedrock valleys. The eskers have locally been overlain by a thin layer of till. Thick proximal outwash deposits occupy elongated depressions in the substratum, which often occur along the sides of esker ridges. Ice-marginal grounding-line deposit in the southern part of the area has a continuation on the adjacent Island of Saaremaa. Therefore, we assume that its formation took place during Palivere Stadial of the last deglaciation, whereas the moraine bank extending southwestward from the Serve Peninsula is tentatively correlated with the Pandivere Stadial. The wedge-shaped ice-marginal grounding-line deposit was locally fed by subglacial meltwater streams during a standstill or slight readvance of the ice margin. The thickness of the glacier at the grounding-line was estimated to reach approximately 180 m. In the western part of the area, terrace-like morphology of the ice-marginal deposit and series of small retreat moraines 10–20 km north of it suggest stepwise retreat of the ice margin. Therefore, a rather thin and mobile ice stream was probably covering the northeastern Baltic Sea during the last deglaciation.     

Seafloor glacial features reveal the extent and decay of the last British Ice Sheet,east of Scotland

Three‐dimensional (3D) seismic datasets, 2D seismic reflection profiles and shallow cores provide insights into the geometry and composition of glacial features on the continental shelf, offshore eastern Scotland (58° N, 1–2° W). The relic features are related to the activity of the last British Ice Sheet (BIS) in the Outer Moray Firth. A landsystem assemblage consisting of four types of subglacial and ice marginal morphology is mapped at the seafloor. The assemblage comprises: (i) large seabed banks (interpreted as end moraines), coeval with the Bosies Bank moraine; (ii) morainic ridges (hummocky, push and end moraine) formed beneath, and at the margins of the ice sheet; (iii) an incised valley (a subglacial meltwater channel), recording meltwater drainage beneath former ice sheets; and (iv) elongate ridges and grooves (subglacial bedforms) overprinted by transverse ridges (grounding line moraines). The bedforms suggest that fast‐flowing grounded ice advanced eastward of the previously proposed terminus of the offshore Late Weichselian BIS, increasing the size and extent of the ice sheet beyond traditional limits. Complex moraine formation at the margins of less active ice characterised subsequent retreat, with periodic stillstands and readvances. Observations are consistent with interpretations of a dynamic and oscillating ice margin during BIS deglaciation, and with an extensive ice sheet in the North Sea basin at the Last Glacial Maximum. Final ice margin retreat was rapid, manifested in stagnant ice topography, which aided preservation of the landsystem record. Copyright © 2008 John Wiley & Sons, Ltd.     

Ice, moraine, and landslide dams in mountainous terrain

We review recent work on ice, moraine, and landslide dams in mountainous terrain, thus complementing several comprehensive summaries on glacier dams in intracontinental and Arctic areas of low relief. We discuss the roles of tectonic and climatic forcing on ice-, moraine-, and landslide-dam formation and sudden drainage, and focus on similarities and differences between their geomorphic impacts on confined valleys drained by steep bedrock and gravel-bed rivers.Despite numerous reported failures of natural dams in mountain belts throughout the world, their relevance to long-term dynamics of mountain rivers remains poorly quantified. All types of dams exert local base-level controls, thus trapping incoming sediment and inhibiting fluvial bedrock incision. Pervasive geomorphic and sedimentary evidence of outburst events is preserved even in areas of high erosion rates, suggesting that sudden dam failures are characterized by processes of catastrophic valley-floor aggradation, active-channel widening, and downstream dispersion of sediment, during which little bedrock erosion seems to be achieved.We find that, in the absence of direct evidence of former dams, a number of similarities among the geomorphic and sedimentologic characteristics of catastrophic outburst flows may give rise to ambiguous inferences on the dam-forming process. This is especially the case for tectonically active mountain belts where there is ample and comparable potential for the formation and failure of ice, moraine, landslide, and polygenetic dams concomitant with climatic oscillations or earthquake disturbance. Hence, the palaeoclimatic implications of erroneously inferring the cause of dam formation may be significant.We recommend that future research on natural dams in mountainous terrain addresses (a) climate- and earthquake-controlled systematics in the pattern of formation and failure; (b) quantification of response of mountain rivers to catastrophic outburst events and their concomitant process sequences; (c) elaboration of a comprehensive classification of natural dams in mountainous terrain with special attention to polygenetic dams; (d) physical-based modelling of dam formation, failure, and routing of water and sediment outbursts; and (e) quantitative controls on the contribution of natural dams to sediment budgets in mountainous terrain.     

Glacitectonic sedimentary and hydraulic processes at an oscillating ice margin

An assemblage of subglacial, ice-terminal and proglacial landforms and sediments provides evidence for the relationship between ice-marginal glacitectonics, sedimentary processes and subglacial and proglacial hydraulic processes at a retreating late Devensian ice margin in north-central Ireland. Deltas were deposited in glacial lakes impounded between the retreating ice margin and the southern Sperrin Mountains, followed by outwash and end moraine formation as the ice margin retreated south. Sediments within the moraines show evidence for ice margin oscillation from two opposing ice margins, including subglacial bedrock rafts and breccias which are separated by glacitectonic shears with silty partings. In adjacent outwash, vertically-disturbed proglacial sands, gravels and silts located in front of moraine positions attest to high hydraulic pressure and subsurface water flow during ice oscillation. The relationship between sedimentary and hydraulic processes in the ice margin region is described by a depositional model which links glacitectonic thrusting and subsurface water flow during ice oscillation to formation of subglacial, ice-terminal and proglacial sediments. The evidence presented in this paper shows that subglacial and proglacial morphosedimentary processes and patterns of sediment deposition are mediated by the presence of proglacial permafrost, which helps direct processes and patterns of groundwater flow.     

Landslides in moraines as triggers of glacial lake outburst floods: example from Palcacocha Lake (Cordillera Blanca,Peru)

Studies focusing on moraine deposits which slide into glacial lakes are scarce, even though they can trigger impact waves responsible for generating glacial lake outburst floods. We focused on landslides in lateral moraines as possible triggers. Detailed geomorphological, geophysical, and satellite radar interferometric investigations of the Palcacocha Lake moraine (Cordillera Blanca, Peru) together with laboratory tests on samples from the site provided data for slope stability calculations using GeoSlope software and hydrodynamic impact wave modeling using the Iber code. We identified landslides that could affect Palcacocha Lake and calculated their stability (factor of safety) under specified conditions, including variable water saturation and earthquake effects. Calculations showed that the moraine slopes are close to the threshold value (Fs?=?1) for stability and are especially sensitive to water saturation. The height of impact waves triggered by a landslide in 2003 and the potential wave heights from newly identified, possibly active landslides were calculated, based on landslide volume estimates, detailed lake bathymetry, and basin topography. Results show that potential future landslide-triggered waves could have similar properties to the 2003 impact wave. Evidence gathered in this study suggests that glacial lake outburst floods triggered by landslides from moraines, however, would be probably smaller than floods resulting from other types of slope processes (e.g., ice/rock avalanches) if dam breach is not taken into account. This assumption has to be critically evaluated against site-specific conditions at a given lake and any possible environmental factors, such as climate change or earthquake that may mobilize larger volumes of moraine material.     

Palaeoglaciology of the last Irish ice sheet reconstructed from striae evidence

A database comprising some ～5200 individual striation measurements on bedrock surfaces across the island of Ireland was used to produce maps of flowsets corresponding to individual ice flow events during the last (late Devensian) glacial cycle. These flowsets were identified on the basis of regional-scale correspondence between striae orientations which, when linked together spatially, are able to identify consistent ice flow vectors. Four main chronological stages are identified on the basis of this evidence: (i) incursion of Scottish ice into Ireland; (ii) glacial maximum conditions; (iii) ice retreat and dissolution; and (iv) development of localised ice domes. Striae-based reconstructions of the glaciology of the last Irish ice sheet are qualitatively different from those based on bedform (mainly drumlin and ribbed moraine) evidence. Significant differences are apparent in upland areas which have fewer preserved bedforms and a higher concentration of striae. Combining bedform and striae datasets will enable a better understanding of the temporal evolution of the ice sheet. It is likely that both datasets record a snapshot of ice flow direction and subglacial conditions and environments immediately prior to preservation of this directional evidence.